if len(startup_policy) > i:
source_dict.update({"startupPolicy": startup_policy[i]})
disk_xml.source = disk_xml.new_disk_source(
**{"attrs": source_dict})
if len(device_bootorder) > i:
disk_xml.boot = device_bootorder[i]
if test_block_size:
disk_xml.blockio = {"logical_block_size": logical_block_size,
"physical_block_size": physical_block_size}
if wwn != "":
disk_xml.wwn = wwn
if serial != "":
disk_xml.serial = serial
if vendor != "":
disk_xml.vendor = vendor
if product != "":
disk_xml.product = product
disk_xml.target = {"dev": device_targets[i], "bus": device_bus[i]}
if len(device_readonly) > i:
disk_xml.readonly = "yes" == device_readonly[i]
# Add driver options from parameters
driver_dict = {"name": "qemu"}
if len(driver_options) > i:
for driver_option in driver_options[i].split(','):
if driver_option != "":
d = driver_option.split('=')
disk_xml.source = disk_xml.new_disk_source(
**{"attrs": source_dict})
if len(device_bootorder) > i:
disk_xml.boot = device_bootorder[i]
if test_block_size:
disk_xml.blockio = {
"logical_block_size": logical_block_size,
"physical_block_size": physical_block_size
}
if wwn != "":
disk_xml.wwn = wwn
if serial != "":
disk_xml.serial = serial
if vendor != "":
disk_xml.vendor = vendor
if product != "":
disk_xml.product = product
disk_xml.target = {"dev": device_targets[i], "bus": device_bus[i]}
if len(device_readonly) > i:
disk_xml.readonly = "yes" == device_readonly[i]
# Add driver options from parameters
driver_dict = {"name": "qemu"}
if len(driver_options) > i:
for driver_option in driver_options[i].split(','):
if driver_option != "":
d = driver_option.split('=')
def run(test, params, env):
"""
Test disk encryption option.
1.Prepare test environment, destroy or suspend a VM.
2.Prepare tgtd and secret config.
3.Edit disks xml and start the domain.
4.Perform test operation.
5.Recover test environment.
6.Confirm the test result.
"""
vm_name = params.get("main_vm")
vm = env.get_vm(vm_name)
virsh_dargs = {'debug': True, 'ignore_status': True}
def check_save_restore(save_file):
"""
Test domain save and restore.
"""
# Save the domain.
ret = virsh.save(vm_name, save_file, **virsh_dargs)
libvirt.check_exit_status(ret)
# Restore the domain.
ret = virsh.restore(save_file, **virsh_dargs)
libvirt.check_exit_status(ret)
def check_snapshot():
"""
Test domain snapshot operation.
"""
snapshot1 = "s1"
snapshot2 = "s2"
ret = virsh.snapshot_create_as(vm_name, snapshot1)
libvirt.check_exit_status(ret)
ret = virsh.snapshot_create_as(
vm_name, "%s --disk-only --diskspec vda,"
"file=/tmp/testvm-snap1" % snapshot2)
libvirt.check_exit_status(ret, True)
ret = virsh.snapshot_create_as(
vm_name, "%s --memspec file=%s,snapshot=external"
" --diskspec vda,file=/tmp/testvm-snap2" % (snapshot2, snapshot2))
libvirt.check_exit_status(ret, True)
def check_in_vm(target, old_parts):
"""
Check mount/read/write disk in VM.
:param vm. VM guest.
:param target. Disk dev in VM.
:return: True if check successfully.
"""
try:
session = vm.wait_for_login()
new_parts = utils_disk.get_parts_list(session)
added_parts = list(set(new_parts).difference(set(old_parts)))
logging.info("Added parts:%s", added_parts)
if len(added_parts) != 1:
logging.error("The number of new partitions is invalid in VM")
return False
added_part = None
if target.startswith("vd"):
if added_parts[0].startswith("vd"):
added_part = added_parts[0]
elif target.startswith("hd"):
if added_parts[0].startswith("sd"):
added_part = added_parts[0]
elif target.startswith("sd"):
added_part = added_parts[0]
if not added_part:
logging.error("Can't see added partition in VM")
return False
utils_disk.linux_disk_check(session, added_part)
session.close()
return True
except (remote.LoginError, virt_vm.VMError, aexpect.ShellError) as e:
logging.error(str(e))
return False
def check_qemu_cmd():
"""
Check qemu-kvm command line options
"""
cmd = ("ps -ef | grep %s | grep -v grep " % vm_name)
if driver_iothread:
cmd += " | grep iothread=iothread%s" % driver_iothread
if process.system(cmd, ignore_status=True, shell=True):
test.fail("Can't see disk option '%s' " "in command line" % cmd)
def check_auth_plaintext(vm_name, password):
"""
Check if libvirt passed the plaintext of the chap authentication
password to qemu.
:param vm_name: The name of vm to be checked.
:param password: The plaintext of password used for chap authentication.
:return: True if using plaintext, False if not.
"""
cmd = ("ps -ef | grep -v grep | grep qemu-kvm | grep %s | grep %s" %
(vm_name, password))
return process.system(cmd, ignore_status=True, shell=True) == 0
# Disk specific attributes.
device = params.get("virt_disk_device", "disk")
device_target = params.get("virt_disk_device_target", "vdd")
device_format = params.get("virt_disk_device_format", "raw")
device_type = params.get("virt_disk_device_type", "file")
device_bus = params.get("virt_disk_device_bus", "virtio")
# Controller specific attributes.
cntlr_type = params.get('controller_type', None)
cntlr_model = params.get('controller_model', None)
cntlr_index = params.get('controller_index', None)
controller_addr_options = params.get('controller_addr_options', None)
driver_iothread = params.get("driver_iothread")
# iscsi options.
iscsi_target = params.get("iscsi_target")
iscsi_host = params.get("iscsi_host")
iscsi_port = params.get("iscsi_port")
emulated_size = params.get("iscsi_image_size", "1")
uuid = params.get("uuid", "")
auth_uuid = "yes" == params.get("auth_uuid", "")
auth_usage = "yes" == params.get("auth_usage", "")
status_error = "yes" == params.get("status_error")
define_error = "yes" == params.get("define_error", "no")
test_save_snapshot = "yes" == params.get("test_save_snapshot", "no")
test_qemu_cmd = "yes" == params.get("test_qemu_cmd", "no")
check_partitions = "yes" == params.get("virt_disk_check_partitions", "yes")
secret_uuid = ""
# Start vm and get all partitions in vm.
if device == "lun":
if vm.is_dead():
vm.start()
session = vm.wait_for_login()
old_parts = utils_disk.get_parts_list(session)
session.close()
vm.destroy(gracefully=False)
# Back up xml file.
vmxml_backup = vm_xml.VMXML.new_from_inactive_dumpxml(vm_name)
try:
chap_user = ""
chap_passwd = ""
if auth_uuid or auth_usage:
auth_place_in_location = params.get("auth_place_in_location")
if 'source' in auth_place_in_location and not libvirt_version.version_compare(
3, 9, 0):
test.cancel(
"place auth in source is not supported in current libvirt version"
)
auth_type = params.get("auth_type")
secret_usage_target = params.get("secret_usage_target")
secret_usage_type = params.get("secret_usage_type")
chap_user = params.get("iscsi_user")
chap_passwd = params.get("iscsi_password")
sec_xml = secret_xml.SecretXML("no", "yes")
sec_xml.description = "iSCSI secret"
sec_xml.auth_type = auth_type
sec_xml.auth_username = chap_user
sec_xml.usage = secret_usage_type
sec_xml.target = secret_usage_target
sec_xml.xmltreefile.write()
ret = virsh.secret_define(sec_xml.xml)
libvirt.check_exit_status(ret)
secret_uuid = re.findall(r".+\S+(\ +\S+)\ +.+\S+",
ret.stdout.strip())[0].lstrip()
logging.debug("Secret uuid %s", secret_uuid)
if secret_uuid == "":
test.error("Failed to get secret uuid")
# Set secret value
encoding = locale.getpreferredencoding()
secret_string = base64.b64encode(
chap_passwd.encode(encoding)).decode(encoding)
ret = virsh.secret_set_value(secret_uuid, secret_string,
**virsh_dargs)
libvirt.check_exit_status(ret)
# Setup iscsi target
iscsi_target, lun_num = libvirt.setup_or_cleanup_iscsi(
is_setup=True,
is_login=False,
image_size=emulated_size,
chap_user=chap_user,
chap_passwd=chap_passwd,
portal_ip=iscsi_host)
# If we use qcow2 disk format, should format iscsi disk first.
if device_format == "qcow2":
cmd = (
"qemu-img create -f qcow2 iscsi://%s:%s/%s/%s %s" %
(iscsi_host, iscsi_port, iscsi_target, lun_num, emulated_size))
process.run(cmd, shell=True)
# Add disk xml.
vmxml = vm_xml.VMXML.new_from_dumpxml(vm_name)
disk_xml = Disk(type_name=device_type)
disk_xml.device = device
disk_xml.target = {"dev": device_target, "bus": device_bus}
driver_dict = {"name": "qemu", "type": device_format}
# For lun type device, iothread attribute need to be set in controller.
if driver_iothread and device != "lun":
driver_dict.update({"iothread": driver_iothread})
vmxml.iothreads = int(driver_iothread)
elif driver_iothread:
vmxml.iothreads = int(driver_iothread)
disk_xml.driver = driver_dict
# Check if we want to use a faked uuid.
if not uuid:
uuid = secret_uuid
auth_dict = {}
if auth_uuid:
auth_dict = {
"auth_user": chap_user,
"secret_type": secret_usage_type,
"secret_uuid": uuid
}
elif auth_usage:
auth_dict = {
"auth_user": chap_user,
"secret_type": secret_usage_type,
"secret_usage": secret_usage_target
}
disk_source = disk_xml.new_disk_source(
**{
"attrs": {
"protocol": "iscsi",
"name": "%s/%s" % (iscsi_target, lun_num)
},
"hosts": [{
"name": iscsi_host,
"port": iscsi_port
}]
})
if auth_dict:
disk_auth = disk_xml.new_auth(**auth_dict)
if 'source' in auth_place_in_location:
disk_source.auth = disk_auth
if 'disk' in auth_place_in_location:
disk_xml.auth = disk_auth
disk_xml.source = disk_source
if device != "lun":
device_str = "serial_" + device_target
disk_xml.serial = device_str
# Sync VM xml.
vmxml.add_device(disk_xml)
# After virtio 1.0 is enabled, lun type device need use virtio-scsi
# instead of virtio, so additional controller is needed.
# Add controller.
if device == "lun":
ctrl = Controller(type_name=cntlr_type)
if cntlr_model is not None:
ctrl.model = cntlr_model
if cntlr_index is not None:
ctrl.index = cntlr_index
if controller_addr_options:
ctrl_addr_dict = {}
for addr_option in controller_addr_options.split(','):
if addr_option != "":
addr_part = addr_option.split('=')
ctrl_addr_dict.update(
{addr_part[0].strip(): addr_part[1].strip()})
ctrl.address = ctrl.new_controller_address(
attrs=ctrl_addr_dict)
# If driver_iothread is true, need add iothread attribute in controller.
if driver_iothread:
ctrl_driver_dict = {}
ctrl_driver_dict.update({"iothread": driver_iothread})
ctrl.driver = ctrl_driver_dict
logging.debug("Controller XML is:%s", ctrl)
if cntlr_type:
vmxml.del_controller(cntlr_type)
else:
vmxml.del_controller("scsi")
vmxml.add_device(ctrl)
try:
# Start the VM and check status.
vmxml.sync()
vm.start()
if status_error:
test.fail("VM started unexpectedly.")
# Check Qemu command line
if test_qemu_cmd:
check_qemu_cmd()
except virt_vm.VMStartError as e:
if status_error:
if re.search(uuid, str(e)):
pass
else:
test.fail("VM failed to start." "Error: %s" % str(e))
except xcepts.LibvirtXMLError as xml_error:
if not define_error:
test.fail("Failed to define VM:\n%s" % xml_error)
else:
# Check partitions in VM.
if check_partitions:
if device == "lun":
if not check_in_vm(device_target, old_parts):
test.fail("Check disk partitions in VM failed")
else:
session = vm.wait_for_login()
added_part = utils_disk.get_disk_by_serial(device_str,
session=session)
if not added_part:
test.fail("Unable to get disk with serial {}".format(
device_str))
utils_disk.linux_disk_check(session, added_part)
session.close()
# Test domain save/restore/snapshot.
if test_save_snapshot:
save_file = os.path.join(data_dir.get_data_dir(),
"%.save" % vm_name)
check_save_restore(save_file)
check_snapshot()
if os.path.exists(save_file):
os.remove(save_file)
# Test libvirt doesn't pass the plaintext of chap password to qemu,
# this function is implemented in libvirt 4.3.0-1.
if (libvirt_version.version_compare(4, 3, 0)
and (auth_uuid or auth_usage) and chap_passwd):
if (check_auth_plaintext(vm_name, chap_passwd)):
test.fail("Libvirt should not pass plaintext of chap "
"password to qemu-kvm.")
finally:
# Close session.
if 'session' in locals():
session.close()
# Delete snapshots.
libvirt.clean_up_snapshots(vm_name, domxml=vmxml_backup)
# Recover VM.
if vm.is_alive():
vm.destroy(gracefully=False)
vmxml_backup.sync("--snapshots-metadata")
# Delete the tmp files.
libvirt.setup_or_cleanup_iscsi(is_setup=False)
# Clean up secret
if secret_uuid:
virsh.secret_undefine(secret_uuid)
