def create_attach_xml(update_xmlfile,
disk_type,
target_bus,
target_dev,
source_iso="",
disk_mode=""):
"""
Create a xml file to update a device.
:param update_xmlfile : path/file to save device XML
:param source_iso : disk's source backing file.
:param disk_type: disk's device type: cdrom or floppy
:param target_bus: disk's target bus
:param target_dev: disk's target device name
:param disk_mode: readonly or shareable
"""
if source_iso:
libvirt.create_local_disk("iso", source_iso)
disk_class = VMXML.get_device_class('disk')
disk = disk_class(type_name='file')
# Static definition for comparison in check_attach()
disk.device = disk_type
disk.target = dict(bus=target_bus, dev=target_dev)
if source_iso:
disk.driver = dict(name='qemu')
disk.source = disk.new_disk_source(attrs={'file': source_iso})
if disk_mode == "readonly":
disk.readonly = True
if disk_mode == "shareable":
disk.share = True
disk.xmltreefile.write()
shutil.copyfile(disk.xml, update_xmlfile)
def do_rename(vm, new_name, uuid=None, fail_info=[]):
# Change name in XML
logging.info("Rename %s to %s.", vm.name, new_name)
try:
vm = VMXML.vm_rename(vm, new_name, uuid) # give it a new uuid
except LibvirtXMLError, detail:
raise error.TestFail("Rename %s to %s failed:\n%s" % (vm.name, new_name, detail))
def agent_connected():
"""
Callback function to check if agent channel connected.
"""
ga_tgt = VMXML.new_from_dumpxml(vm_name).get_section_string(
'/devices/channel/target')
return 'state="connected"' in ga_tgt
def create_attach_xml(update_xmlfile, disk_type, target_bus,
target_dev, source_iso="", disk_mode=""):
"""
Create a xml file to update a device.
:param update_xmlfile : path/file to save device XML
:param source_iso : disk's source backing file.
:param disk_type: disk's device type: cdrom or floppy
:param target_bus: disk's target bus
:param target_dev: disk's target device name
:param disk_mode: readonly or shareable
"""
if source_iso:
libvirt.create_local_disk("iso", source_iso)
disk_class = VMXML.get_device_class('disk')
disk = disk_class(type_name='file')
# Static definition for comparison in check_attach()
disk.device = disk_type
disk.target = dict(bus=target_bus, dev=target_dev)
if source_iso:
disk.driver = dict(name='qemu')
disk.source = disk.new_disk_source(attrs={'file': source_iso})
if disk_mode == "readonly":
disk.readonly = True
if disk_mode == "shareable":
disk.share = True
disk.xmltreefile.write()
shutil.copyfile(disk.xml, update_xmlfile)
def agent_connected():
"""
Callback function to check if agent channel connected.
"""
ga_tgt = VMXML.new_from_dumpxml(vm_name).get_section_string(
'/devices/channel/target')
return 'state="connected"' in ga_tgt
def create_attach_xml(update_xmlfile, source_iso, target_bus, target_dev):
"""
Create a xml file to update a device.
:param update_xmlfile : path/file to save device XML
:param source_iso : disk's source backing file.
:param target_bus : disk's target bus
:param target_dev : disk's target device name
"""
try:
_file = open(source_iso, 'wb')
_file.seek((1024 * 1024) - 1)
_file.write(str(0))
_file.close()
except IOError:
raise error.TestFail("Create source_iso failed!")
disk_class = VMXML.get_device_class('disk')
disk = disk_class(type_name='file')
# Static definition for comparison in check_attach()
disk.device = 'cdrom'
disk.driver = dict(name='file')
disk.source = disk.new_disk_source(attrs={'file': source_iso})
disk.target = dict(bus=target_bus, dev=target_dev)
disk.readonly = True
disk.xmltreefile.write()
shutil.copyfile(disk.xml, update_xmlfile)
def create_attach_xml(update_xmlfile, source_iso, disk_type, target_bus,
target_dev, disk_mode=""):
"""
Create a xml file to update a device.
:param update_xmlfile : path/file to save device XML
:param source_iso : disk's source backing file.
:param disk_type: disk's device type: cdrom or floppy
:param target_bus: disk's target bus
:param target_dev: disk's target device name
:param disk_mode: readonly or shareable
"""
try:
_file = open(source_iso, 'wb')
_file.seek((1024 * 1024) - 1)
_file.write(str(0))
_file.close()
except IOError:
raise error.TestFail("Create source_iso failed!")
disk_class = VMXML.get_device_class('disk')
disk = disk_class(type_name='file')
# Static definition for comparison in check_attach()
disk.device = disk_type
disk.driver = dict(name='qemu')
disk.source = disk.new_disk_source(attrs={'file': source_iso})
disk.target = dict(bus=target_bus, dev=target_dev)
if disk_mode == "readonly":
disk.readonly = True
if disk_mode == "shareable":
disk.share = True
disk.xmltreefile.write()
shutil.copyfile(disk.xml, update_xmlfile)
def do_rename(vm, new_name, uuid=None, fail_info=[]):
# Change name in XML
logging.info("Rename %s to %s.", vm.name, new_name)
try:
vm = VMXML.vm_rename(vm, new_name, uuid) # give it a new uuid
except LibvirtXMLError, detail:
raise error.TestFail("Rename %s to %s failed:\n%s" %
(vm.name, new_name, detail))
def create_attach_xml(params, test, update_xmlfile, source_iso, disk_type, target_bus,
target_dev, disk_mode="", disk_alias=None):
"""
Create a xml file to update a device.
:param parameters from cfg file
:param update_xmlfile : path/file to save device XML
:param source_iso : disk's source backing file.
:param disk_type: disk's device type: cdrom or floppy
:param target_bus: disk's target bus
:param target_dev: disk's target device name
:param disk_mode: readonly or shareable
:param disk_alias: disk's alias name
"""
slice_test = "yes" == params.get("disk_slice", "no")
try:
if slice_test:
libvirt.create_local_disk("file", source_iso, size="1", disk_format="qcow2", extra="-o preallocation=full")
else:
with open(source_iso, 'wb') as _file:
_file.seek((1024 * 1024) - 1)
_file.write(str(0).encode())
except IOError:
test.fail("Create source_iso failed!")
disk_class = VMXML.get_device_class('disk')
disk = disk_class(type_name='file')
# Static definition for comparison in check_attach()`
disk.device = disk_type
disk.driver = dict(name='qemu')
disk_source = disk.new_disk_source(**{"attrs": {'file': source_iso}})
# Add slice field involved in source
if slice_test:
slice_size_param = process.run("du -b %s" % source_iso).stdout_text.strip()
slice_size = re.findall(r'[0-9]+', slice_size_param)
slice_size = ''.join(slice_size)
disk_source.slices = disk.new_slices(
**{"slice_type": "storage", "slice_offset": "0", "slice_size": slice_size})
disk.source = disk_source
disk.target = dict(bus=target_bus, dev=target_dev)
if disk_mode == "readonly":
disk.readonly = True
if disk_mode == "shareable":
disk.share = True
if disk_alias:
disk.alias = dict(name=disk_alias)
disk.xmltreefile.write()
shutil.copyfile(disk.xml, update_xmlfile)
def do_rename(vm, new_name, uuid=None, fail_info=[]):
# Change name in XML
logging.info("Rename %s to %s.", vm.name, new_name)
try:
vm = VMXML.vm_rename(vm, new_name, uuid) # give it a new uuid
except LibvirtXMLError as detail:
test.fail("Rename %s to %s failed:\n%s" %
(vm.name, new_name, detail))
# Exercize the defined XML
try:
vm.start()
except virt_vm.VMStartError as detail:
# Do not raise TestFail because vm should be restored
fail_info.append("Start guest %s failed:%s" % (vm.name, detail))
vm.destroy()
return fail_info
def do_rename(vm, new_name, uuid=None, fail_info=[]):
# Change name in XML
logging.info("Rename %s to %s.", vm.name, new_name)
try:
vm = VMXML.vm_rename(vm, new_name, uuid) # give it a new uuid
except LibvirtXMLError as detail:
test.fail("Rename %s to %s failed:\n%s"
% (vm.name, new_name, detail))
# Exercize the defined XML
try:
vm.start()
except virt_vm.VMStartError as detail:
# Do not raise TestFail because vm should be restored
fail_info.append("Start guest %s failed:%s" % (vm.name, detail))
vm.destroy()
return fail_info
def create_attach_xml(test,
update_xmlfile,
source_iso,
disk_type,
target_bus,
target_dev,
disk_mode="",
disk_alias=None):
"""
Create a xml file to update a device.
:param update_xmlfile : path/file to save device XML
:param source_iso : disk's source backing file.
:param disk_type: disk's device type: cdrom or floppy
:param target_bus: disk's target bus
:param target_dev: disk's target device name
:param disk_mode: readonly or shareable
:param disk_alias: disk's alias name
"""
try:
with open(source_iso, 'wb') as _file:
_file.seek((1024 * 1024) - 1)
_file.write(str(0).encode())
except IOError:
test.fail("Create source_iso failed!")
disk_class = VMXML.get_device_class('disk')
disk = disk_class(type_name='file')
# Static definition for comparison in check_attach()
disk.device = disk_type
disk.driver = dict(name='qemu')
disk.source = disk.new_disk_source(attrs={'file': source_iso})
disk.target = dict(bus=target_bus, dev=target_dev)
if disk_mode == "readonly":
disk.readonly = True
if disk_mode == "shareable":
disk.share = True
if disk_alias:
disk.alias = dict(name=disk_alias)
disk.xmltreefile.write()
shutil.copyfile(disk.xml, update_xmlfile)
def check_result(disk_source, disk_type, disk_target, flags, attach=True):
"""
Check the test result of update-device command.
"""
vm_state = pre_vm_state
active_vmxml = VMXML.new_from_dumpxml(vm_name)
active_attached = is_attached(active_vmxml.devices, disk_type,
disk_source, disk_target)
if vm_state != "transient":
inactive_vmxml = VMXML.new_from_dumpxml(vm_name,
options="--inactive")
inactive_attached = is_attached(inactive_vmxml.devices, disk_type,
disk_source, disk_target)
if flags.count("config") and not flags.count("live"):
if vm_state != "transient":
if attach:
if not inactive_attached:
raise exceptions.TestFail(
"Inactive domain XML not updated"
" when --config options used for"
" attachment")
if vm_state != "shutoff":
if active_attached:
raise exceptions.TestFail(
"Active domain XML updated "
"when --config options used"
" for attachment")
else:
if inactive_attached:
raise exceptions.TestFail(
"Inactive domain XML not updated"
" when --config options used for"
" detachment")
if vm_state != "shutoff":
if not active_attached:
raise exceptions.TestFail(
"Active domain XML updated "
"when --config options used"
" for detachment")
elif flags.count("live") and not flags.count("config"):
if attach:
if vm_state in ["paused", "running", "transient"]:
if not active_attached:
raise exceptions.TestFail(
"Active domain XML not updated"
" when --live options used for"
" attachment")
if vm_state in ["paused", "running"]:
if inactive_attached:
raise exceptions.TestFail(
"Inactive domain XML updated "
"when --live options used for"
" attachment")
else:
if vm_state in ["paused", "running", "transient"]:
if active_attached:
raise exceptions.TestFail(
"Active domain XML not updated"
" when --live options used for"
" detachment")
if vm_state in ["paused", "running"]:
if not inactive_attached:
raise exceptions.TestFail(
"Inactive domain XML updated "
"when --live options used for"
" detachment")
elif flags.count("live") and flags.count("config"):
if attach:
if vm_state in ["paused", "running"]:
if not active_attached:
raise exceptions.TestFail(
"Active domain XML not updated"
" when --live --config options"
" used for attachment")
if not inactive_attached:
raise exceptions.TestFail(
"Inactive domain XML not updated"
" when --live --config options "
"used for attachment")
else:
if vm_state in ["paused", "running"]:
if active_attached:
raise exceptions.TestFail(
"Active domain XML not updated"
" when --live --config options"
" used for detachment")
if inactive_attached:
raise exceptions.TestFail(
"Inactive domain XML not updated"
" when --live --config options "
"used for detachment")
elif flags.count("current") or flags == "":
if attach:
if vm_state in ["paused", "running", "transient"]:
if not active_attached:
raise exceptions.TestFail(
"Active domain XML not updated "
"when --current options used "
"for attachment")
if vm_state in ["paused", "running"]:
if inactive_attached:
raise exceptions.TestFail(
"Inactive domain XML updated "
"when --current options used "
"for live attachment")
if vm_state == "shutoff" and not inactive_attached:
raise exceptions.TestFail(
"Inactive domain XML not updated "
"when --current options used for "
"attachment")
else:
if vm_state in ["paused", "running", "transient"]:
if active_attached:
raise exceptions.TestFail(
"Active domain XML not updated"
" when --current options used "
"for detachment")
if vm_state in ["paused", "running"]:
if not inactive_attached:
raise exceptions.TestFail(
"Inactive domain XML updated "
"when --current options used "
"for live detachment")
if vm_state == "shutoff" and inactive_attached:
raise exceptions.TestFail("Inactive domain XML not updated"
" when --current options used "
"for detachment")
def run(test, params, env):
"""
Test command: virsh update-device.
Update device from an XML <file>.
1.Prepare test environment, adding a cdrom/floppy to VM.
2.Perform virsh update-device operation.
3.Recover test environment.
4.Confirm the test result.
"""
# Before doing anything - let's be sure we can support this test
# Parse flag list, skip testing early if flag is not supported
# NOTE: "".split("--") returns [''] which messes up later empty test
flag = params.get("updatedevice_flag", "")
flag_list = []
if flag.count("--"):
flag_list = flag.split("--")
for item in flag_list:
option = item.strip()
if option == "":
continue
if not bool(virsh.has_command_help_match("update-device", option)):
raise error.TestNAError("virsh update-device doesn't support --%s"
% option)
# As per RH BZ 961443 avoid testing before behavior changes
if 'config' in flag_list:
# SKIP tests using --config if libvirt is 0.9.10 or earlier
if not libvirt_version.version_compare(0, 9, 10):
raise error.TestNAError("BZ 961443: --config behavior change "
"in version 0.9.10")
if 'persistent' in flag_list:
# SKIP tests using --persistent if libvirt 1.0.5 or earlier
if not libvirt_version.version_compare(1, 0, 5):
raise error.TestNAError("BZ 961443: --persistent behavior change "
"in version 1.0.5")
# Prepare initial vm state
vm_name = params.get("main_vm")
vmxml = VMXML.new_from_dumpxml(vm_name, options="--inactive")
vm = env.get_vm(vm_name)
start_vm = "yes" == params.get("start_vm", "no")
# Get the target bus/dev
disk_type = params.get("disk_type", "cdrom")
target_bus = params.get("updatedevice_target_bus", "ide")
target_dev = params.get("updatedevice_target_dev", "hdc")
disk_mode = params.get("disk_mode", "")
support_mode = ['readonly', 'shareable']
if not disk_mode and disk_mode not in support_mode:
raise error.TestError("%s not in support mode %s"
% (disk_mode, support_mode))
# Prepare tmp directory and files.
orig_iso = os.path.join(test.virtdir, "orig.iso")
test_iso = os.path.join(test.virtdir, "test.iso")
test_diff_iso = os.path.join(test.virtdir, "test_diff.iso")
update_xmlfile = os.path.join(test.tmpdir, "update.xml")
create_attach_xml(update_xmlfile, test_iso, disk_type, target_bus,
target_dev, disk_mode)
# This test needs a cdrom/floppy attached first - attach a cdrom/floppy
# to a shutdown vm. Then decide to restart or not
if vm.is_alive():
vm.destroy(gracefully=False)
# Vm should be in 'shut off' status
utils_misc.wait_for(lambda: vm.state() == "shut off", 30)
create_disk(vm_name, orig_iso, disk_type, target_dev, disk_mode)
if start_vm:
vm.start()
vm.wait_for_login().close()
domid = vm.get_id()
else:
domid = "domid invalid; domain is shut-off"
# Get remaining parameters for configuration.
twice = "yes" == params.get("updatedevice_twice", "no")
diff_iso = "yes" == params.get("updatedevice_diff_iso", "no")
vm_ref = params.get("updatedevice_vm_ref", "")
status_error = "yes" == params.get("status_error", "no")
extra = params.get("updatedevice_extra", "")
# OK let's give this a whirl...
errmsg = ""
try:
if vm_ref == "id":
vm_ref = domid
if twice:
# Don't pass in any flags
ret = virsh.update_device(domainarg=domid, filearg=update_xmlfile,
ignore_status=True, debug=True)
if not status_error:
status = ret.exit_status
errmsg += ret.stderr
libvirt.check_exit_status(ret)
if diff_iso:
# Swap filename of device backing file in update.xml
os.remove(update_xmlfile)
create_attach_xml(update_xmlfile, test_diff_iso, disk_type,
target_bus, target_dev, disk_mode)
elif vm_ref == "uuid":
vm_ref = vmxml.uuid
elif vm_ref == "hex_id":
vm_ref = hex(int(domid))
elif vm_ref.find("updatedevice_invalid") != -1:
vm_ref = params.get(vm_ref)
elif vm_ref == "name":
vm_ref = "%s %s" % (vm_name, extra)
cmdresult = virsh.update_device(domainarg=vm_ref,
filearg=update_xmlfile,
flagstr=flag,
ignore_status=True,
debug=True)
status = cmdresult.exit_status
if not status_error:
errmsg += cmdresult.stderr
active_vmxml = VMXML.new_from_dumpxml(vm_name)
inactive_vmxml = VMXML.new_from_dumpxml(vm_name,
options="--inactive")
finally:
vm.destroy(gracefully=False, free_mac_addresses=False)
vmxml.undefine()
vmxml.restore()
vmxml.define()
if os.path.exists(orig_iso):
os.remove(orig_iso)
if os.path.exists(test_iso):
os.remove(test_iso)
if os.path.exists(test_diff_iso):
os.remove(test_diff_iso)
# Result handling logic set errmsg only on error
if status_error:
if status == 0:
errmsg += "\nRun successfully with wrong command!\n"
else: # Normal test
if status != 0:
errmsg += "\nRun failed with right command\n"
if diff_iso: # Expect the backing file to have updated
active_attached = is_attached(active_vmxml.devices, disk_type,
test_diff_iso, target_dev)
inactive_attached = is_attached(inactive_vmxml.devices, disk_type,
test_diff_iso, target_dev)
else: # Expect backing file to remain the same
active_attached = is_attached(active_vmxml.devices, disk_type,
test_iso, target_dev)
inactive_attached = is_attached(inactive_vmxml.devices, disk_type,
test_iso, target_dev)
# Check behavior of combination before individual!
if "config" in flag_list and "live" in flag_list:
if not active_attached:
errmsg += ("Active domain XML not updated when "
"--config --live options used\n")
if not inactive_attached:
errmsg += ("Inactive domain XML not updated when "
"--config --live options used\n")
elif "live" in flag_list and inactive_attached:
errmsg += ("Inactive domain XML updated when "
"--live option used\n")
elif "config" in flag_list and active_attached:
errmsg += ("Active domain XML updated when "
"--config option used\n")
# persistent option behavior depends on start_vm
if "persistent" in flag_list:
if start_vm:
if not active_attached or not inactive_attached:
errmsg += ("XML not updated when --persistent "
"option used on active domain\n")
else:
if not inactive_attached:
errmsg += ("XML not updated when --persistent "
"option used on inactive domain\n")
if len(flag_list) == 0:
# Not specifying any flag is the same as specifying --current
if start_vm:
if not active_attached:
errmsg += "Active domain XML not updated\n"
elif inactive_attached:
errmsg += ("Inactive domain XML updated when active "
"requested\n")
# Log some debugging info before destroying instances
if errmsg and not status_error:
logging.debug("Active XML:")
logging.debug(str(active_vmxml))
logging.debug("Inactive XML:")
logging.debug(str(inactive_vmxml))
logging.debug("active_attached: %s", str(active_attached))
logging.debug("inctive_attached: %s", str(inactive_attached))
logging.debug("Device XML:")
logging.debug(open(update_xmlfile, "r").read())
# clean up tmp files
del vmxml
del active_vmxml
del inactive_vmxml
os.unlink(update_xmlfile)
if errmsg:
raise error.TestFail(errmsg)
def check_result(disk_source, disk_type, disk_target,
flags, attach=True):
"""
Check the test result of update-device command.
"""
vm_state = pre_vm_state
active_vmxml = VMXML.new_from_dumpxml(vm_name)
active_attached = is_attached(active_vmxml.devices, disk_type,
disk_source, disk_target)
if vm_state != "transient":
inactive_vmxml = VMXML.new_from_dumpxml(vm_name,
options="--inactive")
inactive_attached = is_attached(inactive_vmxml.devices, disk_type,
disk_source, disk_target)
if flags.count("config") and not flags.count("live"):
if vm_state != "transient":
if attach:
if not inactive_attached:
raise exceptions.TestFail("Inactive domain XML not updated"
" when --config options used for"
" attachment")
if vm_state != "shutoff":
if active_attached:
raise exceptions.TestFail("Active domain XML updated "
"when --config options used"
" for attachment")
else:
if inactive_attached:
raise exceptions.TestFail("Inactive domain XML not updated"
" when --config options used for"
" detachment")
if vm_state != "shutoff":
if not active_attached:
raise exceptions.TestFail("Active domain XML updated "
"when --config options used"
" for detachment")
elif flags.count("live") and not flags.count("config"):
if attach:
if vm_state in ["paused", "running", "transient"]:
if not active_attached:
raise exceptions.TestFail("Active domain XML not updated"
" when --live options used for"
" attachment")
if vm_state in ["paused", "running"]:
if inactive_attached:
raise exceptions.TestFail("Inactive domain XML updated "
"when --live options used for"
" attachment")
else:
if vm_state in ["paused", "running", "transient"]:
if active_attached:
raise exceptions.TestFail("Active domain XML not updated"
" when --live options used for"
" detachment")
if vm_state in ["paused", "running"]:
if not inactive_attached:
raise exceptions.TestFail("Inactive domain XML updated "
"when --live options used for"
" detachment")
elif flags.count("live") and flags.count("config"):
if attach:
if vm_state in ["paused", "running"]:
if not active_attached:
raise exceptions.TestFail("Active domain XML not updated"
" when --live --config options"
" used for attachment")
if not inactive_attached:
raise exceptions.TestFail("Inactive domain XML not updated"
" when --live --config options "
"used for attachment")
else:
if vm_state in ["paused", "running"]:
if active_attached:
raise exceptions.TestFail("Active domain XML not updated"
" when --live --config options"
" used for detachment")
if inactive_attached:
raise exceptions.TestFail("Inactive domain XML not updated"
" when --live --config options "
"used for detachment")
elif flags.count("current") or flags == "":
if attach:
if vm_state in ["paused", "running", "transient"]:
if not active_attached:
raise exceptions.TestFail("Active domain XML not updated "
"when --current options used "
"for attachment")
if vm_state in ["paused", "running"]:
if inactive_attached:
raise exceptions.TestFail("Inactive domain XML updated "
"when --current options used "
"for live attachment")
if vm_state == "shutoff" and not inactive_attached:
raise exceptions.TestFail("Inactive domain XML not updated "
"when --current options used for "
"attachment")
else:
if vm_state in ["paused", "running", "transient"]:
if active_attached:
raise exceptions.TestFail("Active domain XML not updated"
" when --current options used "
"for detachment")
if vm_state in ["paused", "running"]:
if not inactive_attached:
raise exceptions.TestFail("Inactive domain XML updated "
"when --current options used "
"for live detachment")
if vm_state == "shutoff" and inactive_attached:
raise exceptions.TestFail("Inactive domain XML not updated"
" when --current options used "
"for detachment")
def run(test, params, env):
"""
Restart libvirtd and check the consistent of VM states.
"""
def agent_connected():
"""
Callback function to check if agent channel connected.
"""
ga_tgt = VMXML.new_from_dumpxml(vm_name).get_section_string(
'/devices/channel/target')
return 'state="connected"' in ga_tgt
vm_name = params.get('main_vm')
vm = env.get_vm(vm_name)
if vm.is_alive():
vm.destroy()
time.sleep(2)
vm.start()
time.sleep(20)
# Wait guest agent channel to be connected to avoid XML differ
try:
if not utils_misc.wait_for(agent_connected, 30):
logging.warning('Agent channel not connected')
except LibvirtXMLNotFoundError:
pass
vm_xml = VMXML.new_from_dumpxml(vm_name)
logging.debug(vm_xml)
# Skip the test when serial login is not available
try:
session = vm.wait_for_serial_login(60)
except remote.LoginError:
raise error.TestNAError('Serial console might needed to be '
'configured before test.')
# Send a command line without waiting result
try:
session.cmd('sleep 30; echo hello', timeout=0)
except ShellTimeoutError:
pass
# Restart libvirtd
utils_libvirtd.Libvirtd().restart()
# Check whether guest is still working
vm.cleanup_serial_console()
vm.create_serial_console()
try:
vm.serial_console.read_until_any_line_matches(['hello'], timeout=60)
except ExpectTimeoutError:
raise error.TestFail('Timeout when waiting for command output. '
'Maybe your guest is refreshed.')
# Wait guest agent channel to be reconnected to avoid XML differ
try:
if not utils_misc.wait_for(agent_connected, 30):
logging.warning('Agent channel not recovered after libvirtd '
'restart')
except LibvirtXMLNotFoundError:
pass
# Check whether domain XML changed
vm_xml_new = VMXML.new_from_dumpxml(vm_name)
if str(vm_xml) != str(vm_xml_new):
diff_txt = '\n'.join(
difflib.unified_diff(
str(vm_xml).splitlines(),
str(vm_xml_new).splitlines(),
lineterm='',
)
)
raise error.TestFail("XML changed after libvirtd restart:\n%s"
% diff_txt)
def run(test, params, env):
"""
Test command: virsh update-device.
Update device from an XML <file>.
1.Prepare test environment, adding a cdrom/floppy to VM.
2.Perform virsh update-device operation.
3.Recover test environment.
4.Confirm the test result.
"""
# Before doing anything - let's be sure we can support this test
# Parse flag list, skip testing early if flag is not supported
# NOTE: "".split("--") returns [''] which messes up later empty test
flag = params.get("updatedevice_flag", "")
flag_list = []
if flag.count("--"):
flag_list = flag.split("--")
for item in flag_list:
option = item.strip()
if option == "":
continue
if not bool(virsh.has_command_help_match("update-device", option)):
raise error.TestNAError(
"virsh update-device doesn't support --%s" % option)
# As per RH BZ 961443 avoid testing before behavior changes
if 'config' in flag_list:
# SKIP tests using --config if libvirt is 0.9.10 or earlier
if not libvirt_version.version_compare(0, 9, 10):
raise error.TestNAError("BZ 961443: --config behavior change "
"in version 0.9.10")
if 'persistent' in flag_list:
# SKIP tests using --persistent if libvirt 1.0.5 or earlier
if not libvirt_version.version_compare(1, 0, 5):
raise error.TestNAError("BZ 961443: --persistent behavior change "
"in version 1.0.5")
# Prepare initial vm state
vm_name = params.get("main_vm")
vmxml = VMXML.new_from_dumpxml(vm_name, options="--inactive")
vm = env.get_vm(vm_name)
start_vm = "yes" == params.get("start_vm", "no")
# Get the target bus/dev
disk_type = params.get("disk_type", "cdrom")
target_bus = params.get("updatedevice_target_bus", "ide")
target_dev = params.get("updatedevice_target_dev", "hdc")
disk_mode = params.get("disk_mode", "")
support_mode = ['readonly', 'shareable']
if not disk_mode and disk_mode not in support_mode:
raise error.TestError("%s not in support mode %s" %
(disk_mode, support_mode))
# Prepare tmp directory and files.
orig_iso = os.path.join(test.virtdir, "orig.iso")
test_iso = os.path.join(test.virtdir, "test.iso")
test_diff_iso = os.path.join(test.virtdir, "test_diff.iso")
update_xmlfile = os.path.join(test.tmpdir, "update.xml")
create_attach_xml(update_xmlfile, test_iso, disk_type, target_bus,
target_dev, disk_mode)
# This test needs a cdrom/floppy attached first - attach a cdrom/floppy
# to a shutdown vm. Then decide to restart or not
if vm.is_alive():
vm.destroy()
create_disk(vm_name, orig_iso, disk_type, target_dev, disk_mode)
if start_vm:
vm.start()
domid = vm.get_id()
else:
domid = "domid invalid; domain is shut-off"
# Get remaining parameters for configuration.
twice = "yes" == params.get("updatedevice_twice", "no")
diff_iso = "yes" == params.get("updatedevice_diff_iso", "no")
vm_ref = params.get("updatedevice_vm_ref", "")
status_error = "yes" == params.get("status_error", "no")
extra = params.get("updatedevice_extra", "")
# OK let's give this a whirl...
try:
if vm_ref == "id":
vm_ref = domid
if twice:
# Don't pass in any flags
virsh.update_device(domainarg=domid,
filearg=update_xmlfile,
ignore_status=True,
debug=True)
if diff_iso:
# Swap filename of device backing file in update.xml
os.remove(update_xmlfile)
create_attach_xml(update_xmlfile, test_diff_iso, disk_type,
target_bus, target_dev, disk_mode)
elif vm_ref == "uuid":
vm_ref = vmxml.uuid
elif vm_ref == "hex_id":
vm_ref = hex(int(domid))
elif vm_ref.find("updatedevice_invalid") != -1:
vm_ref = params.get(vm_ref)
elif vm_ref == "name":
vm_ref = "%s %s" % (vm_name, extra)
cmdresult = virsh.update_device(domainarg=vm_ref,
filearg=update_xmlfile,
flagstr=flag,
ignore_status=True,
debug=True)
status = cmdresult.exit_status
active_vmxml = VMXML.new_from_dumpxml(vm_name)
inactive_vmxml = VMXML.new_from_dumpxml(vm_name, options="--inactive")
finally:
vm.destroy(gracefully=False, free_mac_addresses=False)
vmxml.undefine()
vmxml.restore()
vmxml.define()
if os.path.exists(orig_iso):
os.remove(orig_iso)
if os.path.exists(test_iso):
os.remove(test_iso)
if os.path.exists(test_diff_iso):
os.remove(test_diff_iso)
# Result handling logic set errmsg only on error
errmsg = None
if status_error:
if status == 0:
errmsg = "Run successfully with wrong command!"
else: # Normal test
if status != 0:
errmsg = "Run failed with right command"
if diff_iso: # Expect the backing file to have updated
active_attached = is_attached(active_vmxml.devices, disk_type,
test_diff_iso, target_dev)
inactive_attached = is_attached(inactive_vmxml.devices, disk_type,
test_diff_iso, target_dev)
else: # Expect backing file to remain the same
active_attached = is_attached(active_vmxml.devices, disk_type,
test_iso, target_dev)
inactive_attached = is_attached(inactive_vmxml.devices, disk_type,
test_iso, target_dev)
# Check behavior of combination before individual!
if "config" in flag_list and "live" in flag_list:
if not active_attached:
errmsg = ("Active domain XML not updated when "
"--config --live options used")
if not inactive_attached:
errmsg = ("Inactive domain XML not updated when "
"--config --live options used")
elif "live" in flag_list and inactive_attached:
errmsg = ("Inactive domain XML updated when " "--live option used")
elif "config" in flag_list and active_attached:
errmsg = ("Active domain XML updated when " "--config option used")
# persistent option behavior depends on start_vm
if "persistent" in flag_list:
if start_vm:
if not active_attached or not inactive_attached:
errmsg = ("XML not updated when --persistent "
"option used on active domain")
else:
if not inactive_attached:
errmsg = ("XML not updated when --persistent "
"option used on inactive domain")
if len(flag_list) == 0:
# Not specifying any flag is the same as specifying --current
if start_vm:
if not active_attached:
errmsg = "Active domain XML not updated"
elif inactive_attached:
errmsg = ("Inactive domain XML updated when active "
"requested")
# Log some debugging info before destroying instances
if errmsg is not None:
logging.debug("Active XML:")
logging.debug(str(active_vmxml))
logging.debug("Inactive XML:")
logging.debug(str(inactive_vmxml))
logging.debug("active_attached: %s", str(active_attached))
logging.debug("inctive_attached: %s", str(inactive_attached))
logging.debug("Device XML:")
logging.debug(open(update_xmlfile, "r").read())
# clean up tmp files
del vmxml
del active_vmxml
del inactive_vmxml
os.unlink(update_xmlfile)
if errmsg is not None:
raise error.TestFail(errmsg)
def run(test, params, env):
"""
Test command: virsh update-device.
Update device from an XML <file>.
1.Prepare test environment, adding a cdrom/floppy to VM.
2.Perform virsh update-device operation.
3.Recover test environment.
4.Confirm the test result.
"""
vm_name = params.get("main_vm")
vm = env.get_vm(vm_name)
pre_vm_state = params.get("at_dt_device_pre_vm_state")
virsh_dargs = {"debug": True, "ignore_status": True}
def is_attached(vmxml_devices, disk_type, source_file, target_dev):
"""
Check attached device and disk exist or not.
:param vmxml_devices: VMXMLDevices instance
:param disk_type: disk's device type: cdrom or floppy
:param source_file : disk's source file to check
:param target_dev : target device name
:return: True/False if backing file and device found
"""
disks = vmxml_devices.by_device_tag('disk')
for disk in disks:
logging.debug("Check disk XML:\n%s", open(disk['xml']).read())
if disk.device != disk_type:
continue
if disk.target['dev'] != target_dev:
continue
if disk.xmltreefile.find('source') is not None:
if disk.source.attrs['file'] != source_file:
continue
else:
continue
# All three conditions met
logging.debug("Find %s in given disk XML", source_file)
return True
logging.debug("Not find %s in gievn disk XML", source_file)
return False
def check_result(disk_source, disk_type, disk_target,
flags, attach=True):
"""
Check the test result of update-device command.
"""
vm_state = pre_vm_state
active_vmxml = VMXML.new_from_dumpxml(vm_name)
active_attached = is_attached(active_vmxml.devices, disk_type,
disk_source, disk_target)
if vm_state != "transient":
inactive_vmxml = VMXML.new_from_dumpxml(vm_name,
options="--inactive")
inactive_attached = is_attached(inactive_vmxml.devices, disk_type,
disk_source, disk_target)
if flags.count("config") and not flags.count("live"):
if vm_state != "transient":
if attach:
if not inactive_attached:
raise exceptions.TestFail("Inactive domain XML not updated"
" when --config options used for"
" attachment")
if vm_state != "shutoff":
if active_attached:
raise exceptions.TestFail("Active domain XML updated "
"when --config options used"
" for attachment")
else:
if inactive_attached:
raise exceptions.TestFail("Inactive domain XML not updated"
" when --config options used for"
" detachment")
if vm_state != "shutoff":
if not active_attached:
raise exceptions.TestFail("Active domain XML updated "
"when --config options used"
" for detachment")
elif flags.count("live") and not flags.count("config"):
if attach:
if vm_state in ["paused", "running", "transient"]:
if not active_attached:
raise exceptions.TestFail("Active domain XML not updated"
" when --live options used for"
" attachment")
if vm_state in ["paused", "running"]:
if inactive_attached:
raise exceptions.TestFail("Inactive domain XML updated "
"when --live options used for"
" attachment")
else:
if vm_state in ["paused", "running", "transient"]:
if active_attached:
raise exceptions.TestFail("Active domain XML not updated"
" when --live options used for"
" detachment")
if vm_state in ["paused", "running"]:
if not inactive_attached:
raise exceptions.TestFail("Inactive domain XML updated "
"when --live options used for"
" detachment")
elif flags.count("live") and flags.count("config"):
if attach:
if vm_state in ["paused", "running"]:
if not active_attached:
raise exceptions.TestFail("Active domain XML not updated"
" when --live --config options"
" used for attachment")
if not inactive_attached:
raise exceptions.TestFail("Inactive domain XML not updated"
" when --live --config options "
"used for attachment")
else:
if vm_state in ["paused", "running"]:
if active_attached:
raise exceptions.TestFail("Active domain XML not updated"
" when --live --config options"
" used for detachment")
if inactive_attached:
raise exceptions.TestFail("Inactive domain XML not updated"
" when --live --config options "
"used for detachment")
elif flags.count("current") or flags == "":
if attach:
if vm_state in ["paused", "running", "transient"]:
if not active_attached:
raise exceptions.TestFail("Active domain XML not updated "
"when --current options used "
"for attachment")
if vm_state in ["paused", "running"]:
if inactive_attached:
raise exceptions.TestFail("Inactive domain XML updated "
"when --current options used "
"for live attachment")
if vm_state == "shutoff" and not inactive_attached:
raise exceptions.TestFail("Inactive domain XML not updated "
"when --current options used for "
"attachment")
else:
if vm_state in ["paused", "running", "transient"]:
if active_attached:
raise exceptions.TestFail("Active domain XML not updated"
" when --current options used "
"for detachment")
if vm_state in ["paused", "running"]:
if not inactive_attached:
raise exceptions.TestFail("Inactive domain XML updated "
"when --current options used "
"for live detachment")
if vm_state == "shutoff" and inactive_attached:
raise exceptions.TestFail("Inactive domain XML not updated"
" when --current options used "
"for detachment")
def check_rhel_version(release_ver, session=None):
"""
Login to guest and check its release version
"""
rhel_release = {"rhel6": "Red Hat Enterprise Linux Server release 6",
"rhel7": "Red Hat Enterprise Linux Server release 7",
"fedora": "Fedora release"}
version_file = "/etc/redhat-release"
if not rhel_release.has_key(release_ver):
logging.error("Can't support this version of guest: %s",
release_ver)
return False
cmd = "grep '%s' %s" % (rhel_release[release_ver], version_file)
if session:
s = session.cmd_status(cmd)
else:
s = process.run(cmd, ignore_status=True, shell=True).exit_status
logging.debug("Check version cmd return:%s", s)
if s == 0:
return True
else:
return False
vmxml_backup = VMXML.new_from_dumpxml(vm_name, options="--inactive")
# Before doing anything - let's be sure we can support this test
# Parse flag list, skip testing early if flag is not supported
# NOTE: "".split("--") returns [''] which messes up later empty test
at_flag = params.get("at_dt_device_at_options", "")
dt_flag = params.get("at_dt_device_dt_options", "")
flag_list = []
if at_flag.count("--"):
flag_list.extend(at_flag.split("--"))
if dt_flag.count("--"):
flag_list.extend(dt_flag.split("--"))
for item in flag_list:
option = item.strip()
if option == "":
continue
if not bool(virsh.has_command_help_match("update-device", option)):
raise exceptions.TestSkipError("virsh update-device doesn't support "
"--%s" % option)
# As per RH BZ 961443 avoid testing before behavior changes
if 'config' in flag_list:
# SKIP tests using --config if libvirt is 0.9.10 or earlier
if not libvirt_version.version_compare(0, 9, 10):
raise exceptions.TestSkipError("BZ 961443: --config behavior change "
"in version 0.9.10")
if 'persistent' in flag_list or 'live' in flag_list:
# SKIP tests using --persistent if libvirt 1.0.5 or earlier
if not libvirt_version.version_compare(1, 0, 5):
raise exceptions.TestSkipError("BZ 961443: --persistent behavior "
"change in version 1.0.5")
# Get the target bus/dev
disk_type = params.get("disk_type", "cdrom")
target_bus = params.get("updatedevice_target_bus", "ide")
target_dev = params.get("updatedevice_target_dev", "hdc")
disk_mode = params.get("disk_mode", "")
support_mode = ['readonly', 'shareable']
if not disk_mode and disk_mode not in support_mode:
raise exceptions.TestError("%s not in support mode %s"
% (disk_mode, support_mode))
# Prepare tmp directory and files.
orig_iso = os.path.join(data_dir.get_tmp_dir(), "orig.iso")
test_iso = os.path.join(data_dir.get_tmp_dir(), "test.iso")
# Check the version first.
host_rhel6 = check_rhel_version('rhel6')
guest_rhel6 = False
if not vm.is_alive():
vm.start()
session = vm.wait_for_login()
if check_rhel_version('rhel6', session):
guest_rhel6 = True
session.close()
vm.destroy(gracefully=False)
try:
# Prepare the disk first.
create_disk(vm_name, orig_iso, disk_type, target_dev, disk_mode)
vmxml_for_test = VMXML.new_from_dumpxml(vm_name,
options="--inactive")
# Turn VM into certain state.
if pre_vm_state == "running":
if at_flag == "--config" or dt_flag == "--config":
if host_rhel6:
raise exceptions.TestSkipError("Config option not supported"
" on this host")
logging.info("Starting %s..." % vm_name)
if vm.is_dead():
vm.start()
vm.wait_for_login().close()
elif pre_vm_state == "shutoff":
if not at_flag or not dt_flag:
if host_rhel6:
raise exceptions.TestSkipError("Default option not supported"
" on this host")
logging.info("Shuting down %s..." % vm_name)
if vm.is_alive():
vm.destroy(gracefully=False)
elif pre_vm_state == "paused":
if at_flag == "--config" or dt_flag == "--config":
if host_rhel6:
raise exceptions.TestSkipError("Config option not supported"
" on this host")
logging.info("Pausing %s..." % vm_name)
if vm.is_dead():
vm.start()
vm.wait_for_login().close()
if not vm.pause():
raise exceptions.TestSkipError("Cann't pause the domain")
elif pre_vm_state == "transient":
logging.info("Creating %s..." % vm_name)
vm.undefine()
if virsh.create(vmxml_for_test.xml, **virsh_dargs).exit_status:
vmxml_backup.define()
raise exceptions.TestSkipError("Cann't create the domain")
vm.wait_for_login().close()
except Exception, e:
logging.error(str(e))
if os.path.exists(orig_iso):
os.remove(orig_iso)
vmxml_backup.sync()
raise exceptions.TestSkipError(str(e))
def run(test, params, env):
"""
Restart libvirtd and check the consistent of VM states.
"""
def agent_connected():
"""
Callback function to check if agent channel connected.
"""
ga_tgt = VMXML.new_from_dumpxml(vm_name).get_section_string(
'/devices/channel/target')
return 'state="connected"' in ga_tgt
vm_name = params.get('main_vm')
vm = env.get_vm(vm_name)
username = params.get("username")
password = params.get("password")
# Wait guest agent channel to be connected to avoid XML differ
try:
if not utils_misc.wait_for(agent_connected, 30):
logging.warning('Agent channel not connected')
except LibvirtXMLNotFoundError:
pass
vm_xml = VMXML.new_from_dumpxml(vm_name)
logging.debug(vm_xml)
# Skip the test when serial login is not available
try:
session = vm.wait_for_serial_login(60,
username=username,
password=password)
except remote.LoginError:
test.cancel('Serial console might needed to be '
'configured before test.')
# Send a command line without waiting result
try:
session.cmd('sleep 30; echo hello', timeout=0)
except ShellTimeoutError:
pass
# Restart libvirtd
utils_libvirtd.Libvirtd().restart()
# Check whether guest is still working
vm.cleanup_serial_console()
vm.create_serial_console()
try:
vm.serial_console.read_until_any_line_matches(['hello'], timeout=60)
except ExpectTimeoutError:
test.fail('Timeout when waiting for command output. '
'Maybe your guest is refreshed.')
# Wait guest agent channel to be reconnected to avoid XML differ
try:
if not utils_misc.wait_for(agent_connected, 30):
logging.warning('Agent channel not recovered after libvirtd '
'restart')
except LibvirtXMLNotFoundError:
pass
# Check whether domain XML changed
vm_xml_new = VMXML.new_from_dumpxml(vm_name)
if str(vm_xml) != str(vm_xml_new):
diff_txt = '\n'.join(
difflib.unified_diff(
str(vm_xml).splitlines(),
str(vm_xml_new).splitlines(),
lineterm='',
))
test.fail("XML changed after libvirtd restart:\n%s" % diff_txt)
def run(test, params, env):
"""
Test command: virsh update-device.
Update device from an XML <file>.
1.Prepare test environment, adding a cdrom/floppy to VM.
2.Perform virsh update-device operation.
3.Recover test environment.
4.Confirm the test result.
"""
vm_name = params.get("main_vm")
vm = env.get_vm(vm_name)
pre_vm_state = params.get("at_dt_device_pre_vm_state")
virsh_dargs = {"debug": True, "ignore_status": True}
def is_attached(vmxml_devices, disk_type, source_file, target_dev):
"""
Check attached device and disk exist or not.
:param vmxml_devices: VMXMLDevices instance
:param disk_type: disk's device type: cdrom or floppy
:param source_file : disk's source file to check
:param target_dev : target device name
:return: True/False if backing file and device found
"""
disks = vmxml_devices.by_device_tag('disk')
for disk in disks:
logging.debug("Check disk XML:\n%s", open(disk['xml']).read())
if disk.device != disk_type:
continue
if disk.target['dev'] != target_dev:
continue
if disk.xmltreefile.find('source') is not None and \
'file' in disk.source.attrs:
if disk.source.attrs['file'] != source_file:
continue
else:
continue
# All three conditions met
logging.debug("Find %s in given disk XML", source_file)
return True
logging.debug("Not find %s in gievn disk XML", source_file)
return False
def check_result(disk_source, disk_type, disk_target, flags, attach=True):
"""
Check the test result of update-device command.
"""
vm_state = pre_vm_state
active_vmxml = VMXML.new_from_dumpxml(vm_name)
active_attached = is_attached(active_vmxml.devices, disk_type,
disk_source, disk_target)
if vm_state != "transient":
inactive_vmxml = VMXML.new_from_dumpxml(vm_name,
options="--inactive")
inactive_attached = is_attached(inactive_vmxml.devices, disk_type,
disk_source, disk_target)
if flags.count("config") and not flags.count("live"):
if vm_state != "transient":
if attach:
if not inactive_attached:
raise exceptions.TestFail(
"Inactive domain XML not updated"
" when --config options used for"
" attachment")
if vm_state != "shutoff":
if active_attached:
raise exceptions.TestFail(
"Active domain XML updated "
"when --config options used"
" for attachment")
else:
if inactive_attached:
raise exceptions.TestFail(
"Inactive domain XML not updated"
" when --config options used for"
" detachment")
if vm_state != "shutoff":
if not active_attached:
raise exceptions.TestFail(
"Active domain XML updated "
"when --config options used"
" for detachment")
elif flags.count("live") and not flags.count("config"):
if attach:
if vm_state in ["paused", "running", "transient"]:
if not active_attached:
raise exceptions.TestFail(
"Active domain XML not updated"
" when --live options used for"
" attachment")
if vm_state in ["paused", "running"]:
if inactive_attached:
raise exceptions.TestFail(
"Inactive domain XML updated "
"when --live options used for"
" attachment")
else:
if vm_state in ["paused", "running", "transient"]:
if active_attached:
raise exceptions.TestFail(
"Active domain XML not updated"
" when --live options used for"
" detachment")
if vm_state in ["paused", "running"]:
if not inactive_attached:
raise exceptions.TestFail(
"Inactive domain XML updated "
"when --live options used for"
" detachment")
elif flags.count("live") and flags.count("config"):
if attach:
if vm_state in ["paused", "running"]:
if not active_attached:
raise exceptions.TestFail(
"Active domain XML not updated"
" when --live --config options"
" used for attachment")
if not inactive_attached:
raise exceptions.TestFail(
"Inactive domain XML not updated"
" when --live --config options "
"used for attachment")
else:
if vm_state in ["paused", "running"]:
if active_attached:
raise exceptions.TestFail(
"Active domain XML not updated"
" when --live --config options"
" used for detachment")
if inactive_attached:
raise exceptions.TestFail(
"Inactive domain XML not updated"
" when --live --config options "
"used for detachment")
elif flags.count("current") or flags == "":
if attach:
if vm_state in ["paused", "running", "transient"]:
if not active_attached:
raise exceptions.TestFail(
"Active domain XML not updated "
"when --current options used "
"for attachment")
if vm_state in ["paused", "running"]:
if inactive_attached:
raise exceptions.TestFail(
"Inactive domain XML updated "
"when --current options used "
"for live attachment")
if vm_state == "shutoff" and not inactive_attached:
raise exceptions.TestFail(
"Inactive domain XML not updated "
"when --current options used for "
"attachment")
else:
if vm_state in ["paused", "running", "transient"]:
if active_attached:
raise exceptions.TestFail(
"Active domain XML not updated"
" when --current options used "
"for detachment")
if vm_state in ["paused", "running"]:
if not inactive_attached:
raise exceptions.TestFail(
"Inactive domain XML updated "
"when --current options used "
"for live detachment")
if vm_state == "shutoff" and inactive_attached:
raise exceptions.TestFail("Inactive domain XML not updated"
" when --current options used "
"for detachment")
def check_rhel_version(release_ver, session=None):
"""
Login to guest and check its release version
"""
rhel_release = {
"rhel6": "Red Hat Enterprise Linux Server release 6",
"rhel7": "Red Hat Enterprise Linux Server release 7",
"fedora": "Fedora release"
}
version_file = "/etc/redhat-release"
if release_ver not in rhel_release:
logging.error("Can't support this version of guest: %s",
release_ver)
return False
cmd = "grep '%s' %s" % (rhel_release[release_ver], version_file)
if session:
s = session.cmd_status(cmd)
else:
s = process.run(cmd, ignore_status=True, shell=True).exit_status
logging.debug("Check version cmd return:%s", s)
if s == 0:
return True
else:
return False
vmxml_backup = VMXML.new_from_dumpxml(vm_name, options="--inactive")
# Before doing anything - let's be sure we can support this test
# Parse flag list, skip testing early if flag is not supported
# NOTE: "".split("--") returns [''] which messes up later empty test
at_flag = params.get("at_dt_device_at_options", "")
dt_flag = params.get("at_dt_device_dt_options", "")
flag_list = []
if at_flag.count("--"):
flag_list.extend(at_flag.split("--"))
if dt_flag.count("--"):
flag_list.extend(dt_flag.split("--"))
for item in flag_list:
option = item.strip()
if option == "":
continue
if not bool(virsh.has_command_help_match("update-device", option)):
raise exceptions.TestSkipError(
"virsh update-device doesn't support "
"--%s" % option)
# As per RH BZ 961443 avoid testing before behavior changes
if 'config' in flag_list:
# SKIP tests using --config if libvirt is 0.9.10 or earlier
if not libvirt_version.version_compare(0, 9, 10):
raise exceptions.TestSkipError(
"BZ 961443: --config behavior change "
"in version 0.9.10")
if 'persistent' in flag_list or 'live' in flag_list:
# SKIP tests using --persistent if libvirt 1.0.5 or earlier
if not libvirt_version.version_compare(1, 0, 5):
raise exceptions.TestSkipError("BZ 961443: --persistent behavior "
"change in version 1.0.5")
# Get the target bus/dev
disk_type = params.get("disk_type", "cdrom")
target_bus = params.get("updatedevice_target_bus", "ide")
target_dev = params.get("updatedevice_target_dev", "hdc")
disk_mode = params.get("disk_mode", "")
support_mode = ['readonly', 'shareable']
if not disk_mode and disk_mode not in support_mode:
raise exceptions.TestError("%s not in support mode %s" %
(disk_mode, support_mode))
# Prepare tmp directory and files.
orig_iso = os.path.join(data_dir.get_tmp_dir(), "orig.iso")
test_iso = os.path.join(data_dir.get_tmp_dir(), "test.iso")
# Check the version first.
host_rhel6 = False
guest_rhel6 = False
if not params.get("skip_release_check", "no") == "yes":
host_rhel6 = check_rhel_version('rhel6')
if not vm.is_alive():
vm.start()
session = vm.wait_for_login()
if check_rhel_version('rhel6', session):
guest_rhel6 = True
session.close()
vm.destroy(gracefully=False)
try:
# Prepare the disk first.
create_disk(vm_name, orig_iso, disk_type, target_dev, disk_mode)
vmxml_for_test = VMXML.new_from_dumpxml(vm_name, options="--inactive")
# Turn VM into certain state.
if pre_vm_state == "running":
if at_flag == "--config" or dt_flag == "--config":
if host_rhel6:
raise exceptions.TestSkipError(
"Config option not supported"
" on this host")
logging.info("Starting %s..." % vm_name)
if vm.is_dead():
vm.start()
vm.wait_for_login().close()
elif pre_vm_state == "shutoff":
if not at_flag or not dt_flag:
if host_rhel6:
raise exceptions.TestSkipError(
"Default option not supported"
" on this host")
logging.info("Shuting down %s..." % vm_name)
if vm.is_alive():
vm.destroy(gracefully=False)
elif pre_vm_state == "paused":
if at_flag == "--config" or dt_flag == "--config":
if host_rhel6:
raise exceptions.TestSkipError(
"Config option not supported"
" on this host")
logging.info("Pausing %s..." % vm_name)
if vm.is_dead():
vm.start()
vm.wait_for_login().close()
if not vm.pause():
raise exceptions.TestSkipError("Cann't pause the domain")
elif pre_vm_state == "transient":
logging.info("Creating %s..." % vm_name)
vm.undefine()
if virsh.create(vmxml_for_test.xml, **virsh_dargs).exit_status:
vmxml_backup.define()
raise exceptions.TestSkipError("Cann't create the domain")
vm.wait_for_login().close()
except Exception as e:
logging.error(str(e))
if os.path.exists(orig_iso):
os.remove(orig_iso)
vmxml_backup.sync()
raise exceptions.TestSkipError(str(e))
# Get remaining parameters for configuration.
vm_ref = params.get("updatedevice_vm_ref", "domname")
at_status_error = "yes" == params.get("at_status_error", "no")
dt_status_error = "yes" == params.get("dt_status_error", "no")
dom_uuid = vm.get_uuid()
dom_id = vm.get_id()
# Set domain reference.
if vm_ref == "domname":
vm_ref = vm_name
elif vm_ref == "domid":
vm_ref = dom_id
elif vm_ref == "domuuid":
vm_ref = dom_uuid
elif vm_ref == "hexdomid" and dom_id is not None:
vm_ref = hex(int(dom_id))
try:
# Get disk alias
disk_alias = libvirt.get_disk_alias(vm, orig_iso)
# Firstly detach the disk.
update_xmlfile = os.path.join(data_dir.get_tmp_dir(), "update.xml")
create_attach_xml(update_xmlfile, disk_type, target_bus, target_dev,
"", disk_mode, disk_alias)
ret = virsh.update_device(vm_ref,
filearg=update_xmlfile,
flagstr=dt_flag,
ignore_status=True,
debug=True)
if vm.is_paused():
vm.resume()
vm.wait_for_login().close()
if vm.is_alive() and not guest_rhel6:
time.sleep(5)
# For rhel7 guest, need to update twice for it to take effect.
ret = virsh.update_device(vm_ref,
filearg=update_xmlfile,
flagstr=dt_flag,
ignore_status=True,
debug=True)
os.remove(update_xmlfile)
libvirt.check_exit_status(ret, dt_status_error)
if not ret.exit_status:
check_result(orig_iso, disk_type, target_dev, dt_flag, False)
# Then attach the disk.
if pre_vm_state == "paused":
if not vm.pause():
raise exceptions.TestFail("Cann't pause the domain")
create_attach_xml(update_xmlfile, disk_type, target_bus, target_dev,
test_iso, disk_mode, disk_alias)
ret = virsh.update_device(vm_ref,
filearg=update_xmlfile,
flagstr=at_flag,
ignore_status=True,
debug=True)
if vm.is_paused():
vm.resume()
vm.wait_for_login().close()
update_twice = False
if vm.is_alive() and not guest_rhel6:
# For rhel7 guest, need to update twice for it to take effect.
if (pre_vm_state in ["running", "paused"] and dt_flag == "--config"
and at_flag != "--config"):
update_twice = True
elif (pre_vm_state == "transient" and dt_flag.count("config")
and not at_flag.count("config")):
update_twice = True
if update_twice:
time.sleep(5)
ret = virsh.update_device(vm_ref,
filearg=update_xmlfile,
flagstr=at_flag,
ignore_status=True,
debug=True)
libvirt.check_exit_status(ret, at_status_error)
os.remove(update_xmlfile)
if not ret.exit_status:
check_result(test_iso, disk_type, target_dev, at_flag)
# Try to start vm at last.
if vm.is_dead():
vm.start()
vm.wait_for_login().close()
finally:
vm.destroy(gracefully=False, free_mac_addresses=False)
vmxml_backup.sync()
if os.path.exists(orig_iso):
os.remove(orig_iso)
if os.path.exists(test_iso):
os.remove(test_iso)
