def check_result(result, status_error):
"""
Check virt-v2v command result
"""
def vm_check(status_error):
"""
Checking the VM
"""
if status_error:
return
if output_mode == 'json' and not check_json_output(params):
test.fail('check json output failed')
if output_mode == 'local' and not check_local_output(params):
test.fail('check local output failed')
if output_mode in ['null', 'json', 'local']:
return
# vmchecker must be put before skip_vm_check in order to clean up
# the VM.
vmchecker = VMChecker(test, params, env)
params['vmchecker'] = vmchecker
if skip_vm_check == 'yes':
logging.info('Skip checking vm after conversion: %s' %
skip_reason)
return
if output_mode == 'rhev':
if not utils_v2v.import_vm_to_ovirt(
params, address_cache, timeout=v2v_timeout):
test.fail('Import VM failed')
elif output_mode == 'libvirt':
virsh.start(vm_name, debug=True)
# Check guest following the checkpoint document after conversion
logging.info('Checking common checkpoints for v2v')
if 'ogac' in checkpoint:
# windows guests will reboot at any time after qemu-ga is
# installed. The process cannot be controlled. In order to
# don't break vmchecker.run() process, It's better to put
# check_windows_ogac before vmchecker.run(). Because in
# check_windows_ogac, it waits until rebooting completes.
vmchecker.checker.create_session()
if os_type == 'windows':
services = ['qemu-ga']
if not utils_v2v.multiple_versions_compare(
V2V_UNSUPPORT_RHEV_APT_VER):
services.append('rhev-apt')
if 'rhv-guest-tools' in os.getenv('VIRTIO_WIN'):
services.append('spice-ga')
for ser in services:
check_windows_service(vmchecker.checker, ser)
else:
check_linux_ogac(vmchecker.checker)
if 'mac_ip' in checkpoint:
check_static_ip_conf(vmchecker.checker)
ret = vmchecker.run()
if len(ret) == 0:
logging.info("All common checkpoints passed")
# Check specific checkpoints
if 'ogac' in checkpoint and 'signature' in checkpoint:
if not utils_v2v.multiple_versions_compare(
V2V_UNSUPPORT_RHEV_APT_VER):
check_windows_signature(vmchecker.checker,
r'c:\rhev-apt.exe')
if 'cdrom' in checkpoint and "device='cdrom'" not in vmchecker.vmxml:
test.fail('CDROM no longer exists')
if 'vmtools' in checkpoint:
check_vmtools(vmchecker.checker, checkpoint)
if 'modprobe' in checkpoint:
check_modprobe(vmchecker.checker)
if 'device_map' in checkpoint:
check_device_map(vmchecker.checker)
if 'resume_swap' in checkpoint:
check_resume_swap(vmchecker.checker)
if 'rhev_file' in checkpoint:
check_rhev_file_exist(vmchecker.checker)
if 'file_architecture' in checkpoint:
check_file_architecture(vmchecker.checker)
if 'ubuntu_tools' in checkpoint:
check_ubuntools(vmchecker.checker)
if 'vmware_tools' in checkpoint:
check_windows_vmware_tools(vmchecker.checker)
if 'without_default_net' in checkpoint:
if virsh.net_state_dict()[net_name]['active']:
log_fail("Bridge virbr0 already started during conversion")
if 'rhsrvany_checksum' in checkpoint:
check_rhsrvany_checksums(vmchecker.checker)
if 'block_dev' in checkpoint and not os.path.exists(blk_dev_link):
test.fail("checkpoint '%s' failed" % checkpoint)
# Merge 2 error lists
error_list.extend(vmchecker.errors)
# Virtio drivers will not be installed without virtio-win setup
if 'virtio_win_unset' in checkpoint:
missing_list = params.get('missing').split(',')
expect_errors = ['Not find driver: ' + x for x in missing_list]
logging.debug('Expect errors: %s' % expect_errors)
logging.debug('Actual errors: %s' % error_list)
if set(error_list) == set(expect_errors):
error_list[:] = []
else:
logging.error('Virtio drivers not meet expectation')
utils_v2v.check_exit_status(result, status_error)
output = result.stdout_text + result.stderr_text
# VM or local output checking
vm_check(status_error)
# Check log size decrease option
if 'log decrease' in checkpoint:
nbdkit_option = r'nbdkit\.backend\.datapath=0'
if not re.search(nbdkit_option, output):
test.fail("checkpoint '%s' failed" % checkpoint)
if 'fstrim_warning' in checkpoint:
# Actually, fstrim has no relationship with v2v, it may be related
# to kernel, this warning really doesn't matter and has no harm to
# the conversion.
V2V_FSTRIM_SUCESS_VER = "[virt-v2v-1.45.1-1.el9,)"
if utils_v2v.multiple_versions_compare(V2V_FSTRIM_SUCESS_VER):
params.update({'expect_msg': None})
# Log checking
log_check = utils_v2v.check_log(params, output)
if log_check:
log_fail(log_check)
if len(error_list):
test.fail('%d checkpoints failed: %s' %
(len(error_list), error_list))
def check_result(cmd, result, status_error):
"""
Check virt-v2v command result
"""
utils_v2v.check_exit_status(result, status_error, error_flag)
output = to_text(result.stdout + result.stderr, errors=error_flag)
output_stdout = to_text(result.stdout, errors=error_flag)
if status_error:
if checkpoint == 'length_of_error':
log_lines = output.split('\n')
v2v_start = False
for line in log_lines:
if line.startswith('virt-v2v:'):
v2v_start = True
if line.startswith('libvirt:'):
v2v_start = False
if v2v_start and len(line) > 72:
test.fail('Error log longer than 72 charactors: %s' %
line)
if checkpoint == 'disk_not_exist':
vol_list = virsh.vol_list(pool_name)
logging.info(vol_list)
if vm_name in vol_list.stdout:
test.fail('Disk exists for vm %s' % vm_name)
else:
if output_mode == "rhev" and checkpoint != 'quiet':
ovf = get_ovf_content(output)
logging.debug("ovf content: %s", ovf)
check_ovf_snapshot_id(ovf)
if '--vmtype' in cmd:
expected_vmtype = re.findall(r"--vmtype\s(\w+)", cmd)[0]
check_vmtype(ovf, expected_vmtype)
if '-oa' in cmd and '--no-copy' not in cmd:
expected_mode = re.findall(r"-oa\s(\w+)", cmd)[0]
img_path = get_img_path(output)
def check_alloc():
try:
check_image(img_path, "allocation", expected_mode)
return True
except exceptions.TestFail:
pass
if not utils_misc.wait_for(check_alloc, timeout=600, step=10.0):
test.fail('Allocation check failed.')
if '-of' in cmd and '--no-copy' not in cmd and '--print-source' not in cmd and checkpoint != 'quiet':
expected_format = re.findall(r"-of\s(\w+)", cmd)[0]
img_path = get_img_path(output)
check_image(img_path, "format", expected_format)
if '-on' in cmd:
expected_name = re.findall(r"-on\s(\w+)", cmd)[0]
check_new_name(output, expected_name)
if '--no-copy' in cmd:
check_nocopy(output)
if '-oc' in cmd:
expected_uri = re.findall(r"-oc\s(\S+)", cmd)[0]
check_connection(output, expected_uri)
if output_mode == "rhev":
if not utils_v2v.import_vm_to_ovirt(params, address_cache):
test.fail("Import VM failed")
else:
params['vmcheck_flag'] = True
if output_mode == "libvirt":
if "qemu:///session" not in v2v_options and not no_root:
virsh.start(vm_name, debug=True, ignore_status=False)
if checkpoint == ['vmx', 'vmx_ssh']:
vmchecker = VMChecker(test, params, env)
params['vmchecker'] = vmchecker
params['vmcheck_flag'] = True
ret = vmchecker.run()
if len(ret) == 0:
logging.info("All common checkpoints passed")
if checkpoint == 'quiet':
if len(output.strip().splitlines()) > 10:
test.fail('Output is not empty in quiet mode')
if checkpoint == 'dependency':
if 'libguestfs-winsupport' not in output:
test.fail('libguestfs-winsupport not in dependency')
if all(pkg_pattern not in output for pkg_pattern in ['VMF', 'edk2-ovmf']):
test.fail('OVMF/AAVMF not in dependency')
if 'qemu-kvm-rhev' in output:
test.fail('qemu-kvm-rhev is in dependency')
if 'libX11' in output:
test.fail('libX11 is in dependency')
if 'kernel-rt' in output:
test.fail('kernel-rt is in dependency')
win_img = params.get('win_image')
command = 'guestfish -a %s -i'
if process.run(command % win_img, ignore_status=True).exit_status == 0:
test.fail('Command "%s" success' % command % win_img)
if checkpoint == 'no_dcpath':
if '--dcpath' in output:
test.fail('"--dcpath" is not removed')
if checkpoint == 'debug_overlays':
search = re.search('Overlay saved as(.*)', output)
if not search:
test.fail('Not find log of saving overlays')
overlay_path = search.group(1).strip()
logging.debug('Overlay file location: %s' % overlay_path)
if os.path.isfile(overlay_path):
logging.info('Found overlay file: %s' % overlay_path)
else:
test.fail('Overlay file not saved')
if checkpoint.startswith('empty_nic_source'):
target_str = '%s "eth0" mac: %s' % (
params[checkpoint][0], params[checkpoint][1])
logging.info('Expect log: %s', target_str)
if target_str not in output_stdout.lower():
test.fail('Expect log not found: %s' % target_str)
if checkpoint == 'print_source':
check_source(output_stdout)
if checkpoint == 'machine_readable':
if os.path.exists(params.get('example_file', '')):
# Checking items in example_file exist in latest
# output regardless of the orders and new items.
with open(params['example_file']) as f:
for line in f:
if line.strip() not in output_stdout.strip():
test.fail(
'%s not in --machine-readable output' %
line.strip())
else:
test.error('No content to compare with')
if checkpoint == 'compress':
img_path = get_img_path(output)
logging.info('Image path: %s', img_path)
qemu_img_cmd = 'qemu-img check %s' % img_path
qemu_img_locking_feature_support = libvirt_storage.check_qemu_image_lock_support()
if qemu_img_locking_feature_support:
qemu_img_cmd = 'qemu-img check %s -U' % img_path
disk_check = process.run(qemu_img_cmd).stdout_text
logging.info(disk_check)
compress_info = disk_check.split(',')[-1].split('%')[0].strip()
compress_rate = float(compress_info)
logging.info('%s%% compressed', compress_rate)
if compress_rate < 0.1:
test.fail('Disk image NOT compressed')
if checkpoint == 'tail_log':
messages = params['tail'].get_output()
logging.info('Content of /var/log/messages during conversion:')
logging.info(messages)
msg_content = params['msg_content']
if msg_content in messages:
test.fail('Found "%s" in /var/log/messages' % msg_content)
log_check = utils_v2v.check_log(params, output)
if log_check:
test.fail(log_check)
check_man_page(params.get('in_man'), params.get('not_in_man'))
def check_result(cmd, result, status_error):
"""
Check virt-v2v command result
"""
utils_v2v.check_exit_status(result, status_error, error_flag)
output = to_text(result.stdout + result.stderr, errors=error_flag)
output_stdout = to_text(result.stdout, errors=error_flag)
if status_error:
if checkpoint == 'length_of_error':
log_lines = output.split('\n')
v2v_start = False
for line in log_lines:
if line.startswith('virt-v2v:'):
v2v_start = True
if line.startswith('libvirt:'):
v2v_start = False
if v2v_start and len(line) > 72:
test.fail('Error log longer than 72 charactors: %s' %
line)
if checkpoint == 'disk_not_exist':
vol_list = virsh.vol_list(pool_name)
logging.info(vol_list)
if vm_name in vol_list.stdout:
test.fail('Disk exists for vm %s' % vm_name)
else:
if output_mode == "rhev" and checkpoint != 'quiet':
ovf = get_ovf_content(output)
logging.debug("ovf content: %s", ovf)
check_ovf_snapshot_id(ovf)
if '--vmtype' in cmd:
expected_vmtype = re.findall(r"--vmtype\s(\w+)", cmd)[0]
check_vmtype(ovf, expected_vmtype)
if '-oa' in cmd and '--no-copy' not in cmd:
expected_mode = re.findall(r"-oa\s(\w+)", cmd)[0]
img_path = get_img_path(output)
def check_alloc():
try:
check_image(img_path, "allocation", expected_mode)
return True
except exceptions.TestFail:
pass
if not utils_misc.wait_for(check_alloc, timeout=600,
step=10.0):
test.fail('Allocation check failed.')
if '-of' in cmd and '--no-copy' not in cmd and '--print-source' not in cmd and checkpoint != 'quiet':
expected_format = re.findall(r"-of\s(\w+)", cmd)[0]
img_path = get_img_path(output)
check_image(img_path, "format", expected_format)
if '-on' in cmd:
expected_name = re.findall(r"-on\s(\w+)", cmd)[0]
check_new_name(output, expected_name)
if '--no-copy' in cmd:
check_nocopy(output)
if '-oc' in cmd:
expected_uri = re.findall(r"-oc\s(\S+)", cmd)[0]
check_connection(output, expected_uri)
if output_mode == "rhev":
if not utils_v2v.import_vm_to_ovirt(params, address_cache):
test.fail("Import VM failed")
else:
params['vmcheck_flag'] = True
if output_mode == "libvirt":
if "qemu:///session" not in v2v_options and not no_root:
virsh.start(vm_name, debug=True, ignore_status=False)
if checkpoint == ['vmx', 'vmx_ssh']:
vmchecker = VMChecker(test, params, env)
params['vmchecker'] = vmchecker
params['vmcheck_flag'] = True
ret = vmchecker.run()
if len(ret) == 0:
logging.info("All common checkpoints passed")
if checkpoint == 'quiet':
if len(output.strip().splitlines()) > 10:
test.fail('Output is not empty in quiet mode')
if checkpoint == 'dependency':
if 'libguestfs-winsupport' not in output:
test.fail('libguestfs-winsupport not in dependency')
if all(pkg_pattern not in output
for pkg_pattern in ['VMF', 'edk2-ovmf']):
test.fail('OVMF/AAVMF not in dependency')
if 'qemu-kvm-rhev' in output:
test.fail('qemu-kvm-rhev is in dependency')
if 'libX11' in output:
test.fail('libX11 is in dependency')
if 'kernel-rt' in output:
test.fail('kernel-rt is in dependency')
win_img = params.get('win_image')
command = 'guestfish -a %s -i'
if process.run(command % win_img,
ignore_status=True).exit_status == 0:
test.fail('Command "%s" success' % command % win_img)
if checkpoint == 'no_dcpath':
if '--dcpath' in output:
test.fail('"--dcpath" is not removed')
if checkpoint == 'debug_overlays':
search = re.search('Overlay saved as(.*)', output)
if not search:
test.fail('Not find log of saving overlays')
overlay_path = search.group(1).strip()
logging.debug('Overlay file location: %s' % overlay_path)
if os.path.isfile(overlay_path):
logging.info('Found overlay file: %s' % overlay_path)
else:
test.fail('Overlay file not saved')
if checkpoint.startswith('empty_nic_source'):
target_str = '%s "eth0" mac: %s' % (params[checkpoint][0],
params[checkpoint][1])
logging.info('Expect log: %s', target_str)
if target_str not in output_stdout.lower():
test.fail('Expect log not found: %s' % target_str)
if checkpoint == 'print_source':
check_source(output_stdout)
if checkpoint == 'machine_readable':
if os.path.exists(params.get('example_file', '')):
# Checking items in example_file exist in latest
# output regardless of the orders and new items.
with open(params['example_file']) as f:
for line in f:
if line.strip() not in output_stdout.strip():
test.fail(
'%s not in --machine-readable output' %
line.strip())
else:
test.error('No content to compare with')
if checkpoint == 'compress':
img_path = get_img_path(output)
logging.info('Image path: %s', img_path)
qemu_img_cmd = 'qemu-img check %s' % img_path
qemu_img_locking_feature_support = libvirt_storage.check_qemu_image_lock_support(
)
if qemu_img_locking_feature_support:
qemu_img_cmd = 'qemu-img check %s -U' % img_path
disk_check = process.run(qemu_img_cmd).stdout_text
logging.info(disk_check)
compress_info = disk_check.split(',')[-1].split('%')[0].strip()
compress_rate = float(compress_info)
logging.info('%s%% compressed', compress_rate)
if compress_rate < 0.1:
test.fail('Disk image NOT compressed')
if checkpoint == 'tail_log':
messages = params['tail'].get_output()
logging.info('Content of /var/log/messages during conversion:')
logging.info(messages)
msg_content = params['msg_content']
if msg_content in messages:
test.fail('Found "%s" in /var/log/messages' % msg_content)
log_check = utils_v2v.check_log(params, output)
if log_check:
test.fail(log_check)
check_man_page(params.get('in_man'), params.get('not_in_man'))
def check_result(result, status_error):
"""
Check virt-v2v command result
"""
def vm_check(status_error):
"""
Checking the VM
"""
if status_error:
return
if output_mode == 'json' and not check_json_output(params):
test.fail('check json output failed')
if output_mode == 'local' and not check_local_output(params):
test.fail('check local output failed')
if output_mode in ['null', 'json', 'local']:
return
# vmchecker must be put before skip_vm_check in order to clean up
# the VM.
vmchecker = VMChecker(test, params, env)
params['vmchecker'] = vmchecker
if skip_vm_check == 'yes':
logging.info('Skip checking vm after conversion: %s' %
skip_reason)
return
if output_mode == 'rhev':
if not utils_v2v.import_vm_to_ovirt(
params, address_cache, timeout=v2v_timeout):
test.fail('Import VM failed')
elif output_mode == 'libvirt':
virsh.start(vm_name, debug=True)
# Check guest following the checkpoint document after convertion
logging.info('Checking common checkpoints for v2v')
if 'ogac' in checkpoint:
# windows guests will reboot at any time after qemu-ga is
# installed. The process cannot be controled. In order to
# don't break vmchecker.run() process, It's better to put
# check_windows_ogac before vmchecker.run(). Because in
# check_windows_ogac, it waits until rebooting completes.
vmchecker.checker.create_session()
if os_type == 'windows':
services = ['qemu-ga', 'rhev-apt']
if 'rhv-guest-tools' in os.getenv('VIRTIO_WIN'):
services.append('spice-ga')
for ser in services:
check_windows_service(vmchecker.checker, ser)
else:
check_linux_ogac(vmchecker.checker)
if 'mac_ip' in checkpoint:
check_static_ip_conf(vmchecker.checker)
ret = vmchecker.run()
if len(ret) == 0:
logging.info("All common checkpoints passed")
# Check specific checkpoints
if 'ogac' in checkpoint and 'signature' in checkpoint:
check_windows_signature(vmchecker.checker, r'c:\rhev-apt.exe')
if 'cdrom' in checkpoint:
virsh_session = utils_sasl.VirshSessionSASL(params)
virsh_session_id = virsh_session.get_id()
check_device_exist('cdrom', virsh_session_id)
virsh_session.close()
if 'vmtools' in checkpoint:
check_vmtools(vmchecker.checker, checkpoint)
if 'modprobe' in checkpoint:
check_modprobe(vmchecker.checker)
if 'device_map' in checkpoint:
check_device_map(vmchecker.checker)
if 'resume_swap' in checkpoint:
check_resume_swap(vmchecker.checker)
if 'rhev_file' in checkpoint:
check_rhev_file_exist(vmchecker.checker)
if 'file_architecture' in checkpoint:
check_file_architecture(vmchecker.checker)
if 'ubuntu_tools' in checkpoint:
check_ubuntools(vmchecker.checker)
if 'without_default_net' in checkpoint:
if virsh.net_state_dict()[net_name]['active']:
log_fail("Bridge virbr0 already started during conversion")
# Merge 2 error lists
error_list.extend(vmchecker.errors)
utils_v2v.check_exit_status(result, status_error)
output = result.stdout_text + result.stderr_text
# VM or local output checking
vm_check(status_error)
# Check log size decrease option
if 'log decrease' in checkpoint:
nbdkit_option = r'nbdkit\.backend\.datapath=0'
if not re.search(nbdkit_option, output):
test.fail("checkpoint '%s' failed" % checkpoint)
# Log checking
log_check = utils_v2v.check_log(params, output)
if log_check:
log_fail(log_check)
if len(error_list):
test.fail('%d checkpoints failed: %s' %
(len(error_list), error_list))
