def test_join_memory_and_disk(self):
q = CachedQueue(maxsize=2)
for x in range(10):
q.put(x)
def queue_get_after_delay(queue):
time.sleep(1)
for x in range(2):
queue.get()
queue.task_done()
time.sleep(1)
for x in range(8):
queue.get()
queue.task_done()
t = threading.Thread(target=queue_get_after_delay,
args=(q,))
t.start()
start = time.time()
# This should take 3 seconds
q.join()
spent = time.time() - start
self.assertGreater(spent, 2)
def test_add_exceed_memory(self):
q = CachedQueue(maxsize=2)
# These two go to the in memory queue
q.put(1)
q.put(2)
self.assertEqual(q.qsize(), 2)
self.assertEqual(len(q.memory), 2)
# This one goes to the disk queue
q.put(3)
self.assertEqual(q.qsize(), 3)
self.assertEqual(len(q.memory), 2)
self.assertEqual(len(q.disk), 1)
# Get all
self.assertEqual(q.get(), 1)
self.assertEqual(len(q.memory), 1)
self.assertEqual(len(q.disk), 1)
self.assertEqual(q.get(), 2)
self.assertEqual(len(q.memory), 0)
self.assertEqual(len(q.disk), 1)
self.assertEqual(q.get(), 3)
self.assertEqual(len(q.memory), 0)
self.assertEqual(len(q.disk), 0)
self.assertEqual(q.qsize(), 0)
def test_exceptions_no_fail_sync_pointer(self):
q = CachedQueue(maxsize=2)
q.put(1)
q.get()
self.assertRaises(Exception, q.get, block=False)
q.put(1)
self.assertEquals(q.get(), 1)
def test_join_memory(self):
q = CachedQueue(maxsize=2)
q.put(1)
def queue_get_after_delay(queue):
time.sleep(1)
queue.get()
queue.task_done()
t = threading.Thread(target=queue_get_after_delay, args=(q, ))
t.start()
start = time.time()
# This should take 1 second
q.join()
spent = time.time() - start
self.assertGreater(spent, 1)
def test_join_memory(self):
q = CachedQueue(maxsize=2)
q.put(1)
def queue_get_after_delay(queue):
time.sleep(1)
queue.get()
queue.task_done()
t = threading.Thread(target=queue_get_after_delay,
args=(q,))
t.start()
start = time.time()
# This should take 1 second
q.join()
spent = time.time() - start
self.assertGreater(spent, 1)
def test_simple_rpm_speed(self):
q = CachedQueue()
self.assertEqual(0.0, q.get_input_rpm())
self.assertEqual(0.0, q.get_output_rpm())
for i in xrange(4):
q.put(i)
# 20 RPM
time.sleep(3)
self.assertEqual(q.qsize(), 4)
self.assertGreater(q.get_input_rpm(), 19)
self.assertLess(q.get_input_rpm(), 20)
for i in xrange(4):
q.get()
# 60 RPM
time.sleep(1)
self.assertGreater(q.get_output_rpm(), 59)
self.assertLess(q.get_output_rpm(), 60)
self.assertEqual(q.qsize(), 0)
def test_prefer_memory_over_disk(self):
q = CachedQueue(maxsize=2)
# These two go to the in memory queue
q.put(1)
q.put(2)
# This one goes to the disk queue
q.put(3)
# Read one from memory
q.get()
self.assertEqual(len(q.memory), 1)
self.assertEqual(len(q.disk), 1)
# Write one to memory
q.put(4)
self.assertEqual(len(q.memory), 2)
self.assertEqual(len(q.disk), 1)
class BaseConsumer(Process):
"""
Consumer thread that takes fuzzable requests from a Queue that's populated
by the crawl plugins and identified vulnerabilities by performing various
requests.
"""
THREAD_POOL_SIZE = 10
def __init__(self,
consumer_plugins,
w3af_core,
thread_name,
create_pool=True,
max_pool_queued_tasks=0,
max_in_queue_size=0,
thread_pool_size=None):
"""
:param consumer_plugins: Instances of base_consumer plugins in a list
:param w3af_core: The w3af core that we'll use for status reporting
:param thread_name: How to name the current thread, eg. Auditor
:param create_pool: True to create a worker pool for this consumer
"""
super(BaseConsumer, self).__init__(name='%sController' % thread_name)
self.in_queue = CachedQueue(maxsize=max_in_queue_size,
name=thread_name + 'In')
#
# Crawl and infrastructure plugins write to this queue using:
#
# self.output_queue.put(fuzz_req)
#
# The strategy will read items from this queue in a tight loop using:
#
# result_item = url_producer.get_result(timeout=0.1)
#
# And write them to self.in_queue (defined above) for all the url consumers
#
# Since this queue is read in a tight loop, items that are written here
# will, in theory, not stay in memory for long.
#
# Also, items written here are fuzzable requests, which shouldn't use a lot
# of memory.
#
# The only scenario I can think of where this queue is full of items
# is one where the strategy loop is slow / delayed and the crawl plugins
# are all findings many new URLs and forms.
#
# Tests showed something like this for a common site:
#
# [Thu Feb 15 16:45:36 2018 - debug] CachedQueue.get() ... CrawlInfraOut DiskDict size is 19.
# [Thu Feb 15 16:45:36 2018 - debug] CachedQueue.get() ... CrawlInfraOut DiskDict size is 28.
# [Thu Feb 15 16:45:37 2018 - debug] CachedQueue.get() ... CrawlInfraOut DiskDict size is 27.
# ...
# [Thu Feb 15 16:45:52 2018 - debug] CachedQueue.get() ... CrawlInfraOut DiskDict size is 1.
#
# This was with a max_in_queue_size of 100 set for the CachedQueue defined below.
#
# Meaning that:
# * There were 119 items in the queue (100 in memory ) in the first log line
# * Also at 16:45:36, there were 128 items in the queue (100 in memory)
# * It took 16 seconds to consume 28 items from the queue (from second 36 to second 52)
#
# This surprises me a little bit. I expected this queue to have less items in memory.
# Since I want to remove the memory usage in the framework, I'm going to reduce the
# maxsize sent to this CachedQueue to 50
#
# But just in case I'm using a CachedQueue!
self._out_queue = CachedQueue(maxsize=75, name=thread_name + 'Out')
self._thread_name = thread_name
self._consumer_plugins = consumer_plugins
self._w3af_core = w3af_core
self._observers = []
self._tasks_in_progress = {}
self._poison_pill_sent = False
self._has_finished = False
self._threadpool = None
if create_pool:
self._threadpool = Pool(thread_pool_size or self.THREAD_POOL_SIZE,
worker_names='%sWorker' % thread_name,
max_queued_tasks=max_pool_queued_tasks)
def get_pool(self):
return self._threadpool
def get_name(self):
raise NotImplementedError
def set_has_finished(self):
self._has_finished = True
self._w3af_core.strategy.clear_queue_speed_data()
def run(self):
"""
Consume the queue items, sending them to the plugins which are then
going to find vulnerabilities, new URLs, etc.
"""
while True:
try:
work_unit = self.in_queue.get()
except KeyboardInterrupt:
# https://github.com/andresriancho/w3af/issues/9587
#
# If we don't do this, the thread will die and will never
# process the POISON_PILL, which will end up in an endless
# wait for .join()
continue
if work_unit == POISON_PILL:
try:
# Close the pool and wait for everyone to finish
if self._threadpool is not None:
self._threadpool.close()
self._threadpool.join()
self._threadpool = None
self._teardown()
finally:
# Finish this consumer and everyone consuming the output
self._out_queue.put(POISON_PILL)
self.in_queue.task_done()
self.set_has_finished()
break
else:
# pylint: disable=E1120
try:
self._consume_wrapper(work_unit)
finally:
self.in_queue.task_done()
def get_running_task_count(self):
"""
:return: The number of tasks which are currently running in the
threadpool. This is commonly used for measuring ETA.
"""
if self._threadpool is None:
return 0
return self._threadpool.get_running_task_count()
def _teardown(self):
raise NotImplementedError
def _consume(self, work_unit):
raise NotImplementedError
def has_finished(self):
return self._has_finished
@task_decorator
def _consume_wrapper(self, function_id, work_unit):
"""
Just makes sure that all _consume methods are decorated as tasks.
"""
return self._consume(work_unit)
def _task_done(self, function_id):
"""
The task_in_progress_counter is needed because we want to know if the
consumer is processing something and let it finish. It is mainly used
in the has_pending_work().
For example:
* You can have pending work if there are items in the input_queue
* You can have pending work if there are still items to be read from
the output_queue by one of the consumers that reads our output.
* You can have pending work when there are no items in input_queue
and no items in output_queue but the threadpool inside the consumer
is processing something. This situation is handled by the
self._tasks_in_progress attribute and the _add_task and
_task_done methods.
So, for each _add_task() there has to be a _task_done() even if the
task ends in an error or exception.
Recommendation: Do NOT set the callback for apply_async to call
_task_done, the Python2.7 pool implementation won't call it if the
function raised an exception and you'll end up with tasks in progress
that finished with an exception.
"""
try:
self._tasks_in_progress.pop(function_id)
except KeyError:
raise AssertionError('The function %s was not found!' %
function_id)
def _add_task(self, function_id):
"""
:param function_id: Just for debugging
@see: _task_done()'s documentation.
"""
self._tasks_in_progress[function_id] = 1
def in_queue_put(self, work, force=False):
"""
Add work to the queue
:param work: Work item
:param force: Add to the queue even when the poison pill was already
sent, this should NEVER be used unless you know what
you are doing!
:return: True if the task was added to the queue
"""
if work is None:
return
# Force the queue not to accept anything after POISON_PILL is sent.
#
# If anything is put to the queue after POISON_PILL, a race condition
# might happen and the consumer might never stop
#
# https://github.com/andresriancho/w3af/pull/16063
if self._poison_pill_sent and not force:
return
return self.in_queue.put(work)
def in_queue_put_iter(self, work_iter):
if work_iter is not None:
for work in work_iter:
self.in_queue_put(work)
def has_pending_work(self):
"""
@see: _task_done() documentation
:return: True if the in_queue_size is != 0 OR if one of the pool workers
is still doing something that might impact on out_queue.
"""
if self.in_queue_size() > 0:
return True
if self.out_queue.qsize() > 0:
return True
if len(self._tasks_in_progress) > 0:
return True
# This is a special case which loosely translates to: "If there are any
# pending tasks in the threadpool, even if they haven't yet called the
# _add_task method, we know we have pending work to do".
if self._threadpool is not None:
if self._threadpool._inqueue.qsize() > 0:
return True
if self._threadpool._outqueue.qsize() > 0:
return True
return False
@property
def out_queue(self):
# This output queue can contain one of the following:
# * POISON_PILL
# * (plugin_name, fuzzable_request, AsyncResult)
# * An ExceptionData instance
return self._out_queue
def in_queue_size(self):
return self.in_queue.qsize()
def join(self):
"""
Poison the loop and wait for all queued work to finish this might take
some time to process.
"""
start_time = time.time()
if not self.is_alive():
# This return has a long history, follow it here:
# https://github.com/andresriancho/w3af/issues/1172
return
if not self._poison_pill_sent:
# https://github.com/andresriancho/w3af/issues/9587
# let put() know that all new tasks should be ignored
self._poison_pill_sent = True
# send the poison pill
self.in_queue_put(POISON_PILL, force=True)
self.in_queue.join()
if self._threadpool is not None:
self._threadpool.close()
self._threadpool.join()
spent_time = time.time() - start_time
om.out.debug('%s took %.2f seconds to join()' %
(self._thread_name, spent_time))
def terminate(self):
"""
Remove all queued work from in_queue and poison the loop so the consumer
exits. Should be very fast and called only if we don't care about the
queued work anymore (ie. user clicked stop in the UI).
"""
while not self.in_queue.empty():
try:
self.in_queue.get_nowait()
except Empty:
# We get here in very rare cases where:
#
# * Another thread (T1) is running and reading from in_queue
# * Our thread (T2) asks if the queue is empty and gets False
# * T1 reads from in_queue
# * T2 reads from the queue but there are no more tasks there
# * T2 locks for ever (at least that is what happen when self.in_queue.get()
# was used instead of get_nowait()
#
msg = 'Handled race condition in %s consumer terminate()'
args = (self._thread_name, )
om.out.debug(msg % args)
continue
self.in_queue.task_done()
om.out.debug('No more tasks in %s consumer input queue.' %
self._thread_name)
self.join()
def get_result(self, timeout=0.5):
"""
:return: The first result from the output Queue.
"""
return self._out_queue.get(timeout=timeout)
def handle_exception(self, phase, plugin_name, fuzzable_request,
_exception):
"""
Get the exception information, and put it into the output queue
then, the strategy will get the items from the output queue and
handle the exceptions.
:param plugin_name: The plugin that generated the exception
:param fuzzable_request: The fuzzable request that was sent as input to
the plugin when the exception was raised
:param _exception: The exception object
"""
except_type, except_class, tb = sys.exc_info()
enabled_plugins = pprint_plugins(self._w3af_core)
status = CoreStatus(self._w3af_core)
status.set_running_plugin(phase, plugin_name, log=False)
status.set_current_fuzzable_request(phase, fuzzable_request)
exception_data = ExceptionData(status, _exception, tb, enabled_plugins)
self._out_queue.put(exception_data)
def add_observer(self, observer):
self._observers.append(observer)
def _log_end_took(self, msg_fmt, start_time, plugin):
spent_time = time.time() - start_time
args = (spent_time, plugin.get_name())
om.out.debug(msg_fmt % args)
class BaseConsumer(Process):
"""
Consumer thread that takes fuzzable requests from a Queue that's populated
by the crawl plugins and identified vulnerabilities by performing various
requests.
"""
THREAD_POOL_SIZE = 10
def __init__(self,
consumer_plugins,
w3af_core,
thread_name,
create_pool=True,
max_pool_queued_tasks=0,
max_in_queue_size=0,
thread_pool_size=None):
"""
:param consumer_plugins: Instances of base_consumer plugins in a list
:param w3af_core: The w3af core that we'll use for status reporting
:param thread_name: How to name the current thread, eg. Auditor
:param create_pool: True to create a worker pool for this consumer
"""
super(BaseConsumer, self).__init__(name='%sController' % thread_name)
self.in_queue = CachedQueue(maxsize=max_in_queue_size,
name=thread_name)
self._out_queue = Queue.Queue()
self._thread_name = thread_name
self._consumer_plugins = consumer_plugins
self._w3af_core = w3af_core
self._observers = []
self._tasks_in_progress = {}
self._poison_pill_sent = False
self._threadpool = None
if create_pool:
self._threadpool = Pool(thread_pool_size or self.THREAD_POOL_SIZE,
worker_names='%sWorker' % thread_name,
max_queued_tasks=max_pool_queued_tasks)
def run(self):
"""
Consume the queue items, sending them to the plugins which are then
going to find vulnerabilities, new URLs, etc.
"""
while True:
try:
work_unit = self.in_queue.get()
except KeyboardInterrupt:
# https://github.com/andresriancho/w3af/issues/9587
#
# If we don't do this, the thread will die and will never
# process the POISON_PILL, which will end up in an endless
# wait for .join()
continue
if work_unit == POISON_PILL:
# Close the pool and wait for everyone to finish
self._threadpool.close()
self._threadpool.join()
self._threadpool = None
self._teardown()
# Finish this consumer and everyone consuming the output
self._out_queue.put(POISON_PILL)
self.in_queue.task_done()
break
else:
# pylint: disable=E1120
try:
self._consume_wrapper(work_unit)
finally:
self.in_queue.task_done()
def _teardown(self):
raise NotImplementedError
def _consume(self, work_unit):
raise NotImplementedError
@task_decorator
def _consume_wrapper(self, function_id, work_unit):
"""
Just makes sure that all _consume methods are decorated as tasks.
"""
return self._consume(work_unit)
def _task_done(self, function_id):
"""
The task_in_progress_counter is needed because we want to know if the
consumer is processing something and let it finish. It is mainly used
in the has_pending_work().
For example:
* You can have pending work if there are items in the input_queue
* You can have pending work if there are still items to be read from
the output_queue by one of the consumers that reads our output.
* You can have pending work when there are no items in input_queue
and no items in output_queue but the threadpool inside the consumer
is processing something. This situation is handled by the
self._tasks_in_progress attribute and the _add_task and
_task_done methods.
So, for each _add_task() there has to be a _task_done() even if the
task ends in an error or exception.
Recommendation: Do NOT set the callback for apply_async to call
_task_done, the Python2.7 pool implementation won't call it if the
function raised an exception and you'll end up with tasks in progress
that finished with an exception.
"""
try:
self._tasks_in_progress.pop(function_id)
except KeyError:
raise AssertionError('The function %s was not found!' %
function_id)
def _add_task(self, function_id):
"""
:param function_id: Just for debugging
@see: _task_done()'s documentation.
"""
self._tasks_in_progress[function_id] = 1
def in_queue_put(self, work):
# Force the queue not to accept anything after POISON_PILL is sent.
# If anything is put to the queue after POISON_PILL, a race condition might happens
# and the consumer might never stop
# https://github.com/andresriancho/w3af/pull/16063
if self._poison_pill_sent:
return
if work is not None:
return self.in_queue.put(work)
def in_queue_put_iter(self, work_iter):
if work_iter is not None:
for work in work_iter:
self.in_queue_put(work)
def has_pending_work(self):
"""
@see: _task_done() documentation
:return: True if the in_queue_size is != 0 OR if one of the pool workers
is still doing something that might impact on out_queue.
"""
if self.in_queue_size() > 0 \
or self.out_queue.qsize() > 0:
return True
if len(self._tasks_in_progress) > 0:
return True
# This is a special case which loosely translates to: "If there are any
# pending tasks in the threadpool, even if they haven't yet called the
# _add_task method, we know we have pending work to do".
if self._threadpool is not None:
if self._threadpool._inqueue.qsize() > 0:
return True
if self._threadpool._outqueue.qsize() > 0:
return True
return False
@property
def out_queue(self):
# This output queue can contain one of the following:
# * POISON_PILL
# * (plugin_name, fuzzable_request, AsyncResult)
# * An ExceptionData instance
return self._out_queue
def in_queue_size(self):
return self.in_queue.qsize()
def join(self):
"""
Poison the loop and wait for all queued work to finish this might take
some time to process.
"""
start_time = time.time()
if not self.is_alive():
# This return has a long history, follow it here:
# https://github.com/andresriancho/w3af/issues/1172
return
if not self._poison_pill_sent:
# send the poison pill
self.in_queue_put(POISON_PILL)
# https://github.com/andresriancho/w3af/issues/9587
# let put() know that all new tasks should be ignored
self._poison_pill_sent = True
self.in_queue.join()
if self._threadpool is not None:
self._threadpool.close()
self._threadpool.join()
spent_time = time.time() - start_time
om.out.debug('%s took %.2f seconds to join()' %
(self._thread_name, spent_time))
def terminate(self):
"""
Remove all queued work from in_queue and poison the loop so the consumer
exits. Should be very fast and called only if we don't care about the
queued work anymore (ie. user clicked stop in the UI).
"""
while not self.in_queue.empty():
self.in_queue.get()
self.in_queue.task_done()
self.join()
def get_result(self, timeout=0.5):
"""
:return: The first result from the output Queue.
"""
return self._out_queue.get(timeout=timeout)
def handle_exception(self, phase, plugin_name, fuzzable_request,
_exception):
"""
Get the exception information, and put it into the output queue
then, the strategy will get the items from the output queue and
handle the exceptions.
:param plugin_name: The plugin that generated the exception
:param fuzzable_request: The fuzzable request that was sent as input to
the plugin when the exception was raised
:param _exception: The exception object
"""
except_type, except_class, tb = sys.exc_info()
enabled_plugins = pprint_plugins(self._w3af_core)
status = w3af_core_status(self._w3af_core)
status.set_running_plugin(phase, plugin_name, log=False)
status.set_current_fuzzable_request(phase, fuzzable_request)
exception_data = ExceptionData(status, _exception, tb, enabled_plugins)
self._out_queue.put(exception_data)
def add_observer(self, observer):
self._observers.append(observer)
class BaseConsumer(Process):
"""
Consumer thread that takes fuzzable requests from a Queue that's populated
by the crawl plugins and identified vulnerabilities by performing various
requests.
"""
THREAD_POOL_SIZE = 10
def __init__(self, consumer_plugins, w3af_core, thread_name,
create_pool=True, max_pool_queued_tasks=0,
max_in_queue_size=0, thread_pool_size=None):
"""
:param consumer_plugins: Instances of base_consumer plugins in a list
:param w3af_core: The w3af core that we'll use for status reporting
:param thread_name: How to name the current thread, eg. Auditor
:param create_pool: True to create a worker pool for this consumer
"""
super(BaseConsumer, self).__init__(name='%sController' % thread_name)
self.in_queue = CachedQueue(maxsize=max_in_queue_size,
name=thread_name + 'In')
#
# Crawl and infrastructure plugins write to this queue using:
#
# self.output_queue.put(fuzz_req)
#
# The strategy will read items from this queue in a tight loop using:
#
# result_item = url_producer.get_result(timeout=0.1)
#
# And write them to self.in_queue (defined above) for all the url consumers
#
# Since this queue is read in a tight loop, items that are written here
# will, in theory, not stay in memory for long.
#
# Also, items written here are fuzzable requests, which shouldn't use a lot
# of memory.
#
# The only scenario I can think of where this queue is full of items
# is one where the strategy loop is slow / delayed and the crawl plugins
# are all findings many new URLs and forms.
#
# Tests showed something like this for a common site:
#
# [Thu Feb 15 16:45:36 2018 - debug] CachedQueue.get() ... CrawlInfraOut DiskDict size is 19.
# [Thu Feb 15 16:45:36 2018 - debug] CachedQueue.get() ... CrawlInfraOut DiskDict size is 28.
# [Thu Feb 15 16:45:37 2018 - debug] CachedQueue.get() ... CrawlInfraOut DiskDict size is 27.
# ...
# [Thu Feb 15 16:45:52 2018 - debug] CachedQueue.get() ... CrawlInfraOut DiskDict size is 1.
#
# This was with a max_in_queue_size of 100 set for the CachedQueue defined below.
#
# Meaning that:
# * There were 119 items in the queue (100 in memory ) in the first log line
# * Also at 16:45:36, there were 128 items in the queue (100 in memory)
# * It took 16 seconds to consume 28 items from the queue (from second 36 to second 52)
#
# This surprises me a little bit. I expected this queue to have less items in memory.
# Since I want to remove the memory usage in the framework, I'm going to reduce the
# maxsize sent to this CachedQueue to 50
#
# But just in case I'm using a CachedQueue!
self._out_queue = CachedQueue(maxsize=75, name=thread_name + 'Out')
self._thread_name = thread_name
self._consumer_plugins = consumer_plugins
self._w3af_core = w3af_core
self._observers = []
self._tasks_in_progress = {}
self._poison_pill_sent = False
self._threadpool = None
if create_pool:
self._threadpool = Pool(thread_pool_size or self.THREAD_POOL_SIZE,
worker_names='%sWorker' % thread_name,
max_queued_tasks=max_pool_queued_tasks)
def get_pool(self):
return self._threadpool
def run(self):
"""
Consume the queue items, sending them to the plugins which are then
going to find vulnerabilities, new URLs, etc.
"""
while True:
try:
work_unit = self.in_queue.get()
except KeyboardInterrupt:
# https://github.com/andresriancho/w3af/issues/9587
#
# If we don't do this, the thread will die and will never
# process the POISON_PILL, which will end up in an endless
# wait for .join()
continue
if work_unit == POISON_PILL:
try:
# Close the pool and wait for everyone to finish
if self._threadpool is not None:
self._threadpool.close()
self._threadpool.join()
self._threadpool = None
self._teardown()
finally:
# Finish this consumer and everyone consuming the output
self._out_queue.put(POISON_PILL)
self.in_queue.task_done()
break
else:
# pylint: disable=E1120
try:
self._consume_wrapper(work_unit)
finally:
self.in_queue.task_done()
def _teardown(self):
raise NotImplementedError
def _consume(self, work_unit):
raise NotImplementedError
@task_decorator
def _consume_wrapper(self, function_id, work_unit):
"""
Just makes sure that all _consume methods are decorated as tasks.
"""
return self._consume(work_unit)
def _task_done(self, function_id):
"""
The task_in_progress_counter is needed because we want to know if the
consumer is processing something and let it finish. It is mainly used
in the has_pending_work().
For example:
* You can have pending work if there are items in the input_queue
* You can have pending work if there are still items to be read from
the output_queue by one of the consumers that reads our output.
* You can have pending work when there are no items in input_queue
and no items in output_queue but the threadpool inside the consumer
is processing something. This situation is handled by the
self._tasks_in_progress attribute and the _add_task and
_task_done methods.
So, for each _add_task() there has to be a _task_done() even if the
task ends in an error or exception.
Recommendation: Do NOT set the callback for apply_async to call
_task_done, the Python2.7 pool implementation won't call it if the
function raised an exception and you'll end up with tasks in progress
that finished with an exception.
"""
try:
self._tasks_in_progress.pop(function_id)
except KeyError:
raise AssertionError('The function %s was not found!' % function_id)
def _add_task(self, function_id):
"""
:param function_id: Just for debugging
@see: _task_done()'s documentation.
"""
self._tasks_in_progress[function_id] = 1
def in_queue_put(self, work, force=False):
"""
Add work to the queue
:param work: Work item
:param force: Add to the queue even when the poison pill was already
sent, this should NEVER be used unless you know what
you are doing!
:return: True if the task was added to the queue
"""
if work is None:
return
# Force the queue not to accept anything after POISON_PILL is sent.
#
# If anything is put to the queue after POISON_PILL, a race condition
# might happen and the consumer might never stop
#
# https://github.com/andresriancho/w3af/pull/16063
if self._poison_pill_sent and not force:
return
return self.in_queue.put(work)
def in_queue_put_iter(self, work_iter):
if work_iter is not None:
for work in work_iter:
self.in_queue_put(work)
def has_pending_work(self):
"""
@see: _task_done() documentation
:return: True if the in_queue_size is != 0 OR if one of the pool workers
is still doing something that might impact on out_queue.
"""
if self.in_queue_size() > 0:
return True
if self.out_queue.qsize() > 0:
return True
if len(self._tasks_in_progress) > 0:
return True
# This is a special case which loosely translates to: "If there are any
# pending tasks in the threadpool, even if they haven't yet called the
# _add_task method, we know we have pending work to do".
if self._threadpool is not None:
if self._threadpool._inqueue.qsize() > 0:
return True
if self._threadpool._outqueue.qsize() > 0:
return True
return False
@property
def out_queue(self):
# This output queue can contain one of the following:
# * POISON_PILL
# * (plugin_name, fuzzable_request, AsyncResult)
# * An ExceptionData instance
return self._out_queue
def in_queue_size(self):
return self.in_queue.qsize()
def join(self):
"""
Poison the loop and wait for all queued work to finish this might take
some time to process.
"""
start_time = time.time()
if not self.is_alive():
# This return has a long history, follow it here:
# https://github.com/andresriancho/w3af/issues/1172
return
if not self._poison_pill_sent:
# https://github.com/andresriancho/w3af/issues/9587
# let put() know that all new tasks should be ignored
self._poison_pill_sent = True
# send the poison pill
self.in_queue_put(POISON_PILL, force=True)
self.in_queue.join()
if self._threadpool is not None:
self._threadpool.close()
self._threadpool.join()
spent_time = time.time() - start_time
om.out.debug('%s took %.2f seconds to join()' % (self._thread_name, spent_time))
def terminate(self):
"""
Remove all queued work from in_queue and poison the loop so the consumer
exits. Should be very fast and called only if we don't care about the
queued work anymore (ie. user clicked stop in the UI).
"""
while not self.in_queue.empty():
try:
self.in_queue.get_nowait()
except Empty:
# We get here in very rare cases where:
#
# * Another thread (T1) is running and reading from in_queue
# * Our thread (T2) asks if the queue is empty and gets False
# * T1 reads from in_queue
# * T2 reads from the queue but there are no more tasks there
# * T2 locks for ever (at least that is what happen when self.in_queue.get()
# was used instead of get_nowait()
#
msg = 'Handled race condition in %s consumer terminate()'
args = (self._thread_name,)
om.out.debug(msg % args)
continue
self.in_queue.task_done()
om.out.debug('No more tasks in %s consumer input queue.' % self._thread_name)
self.join()
def get_result(self, timeout=0.5):
"""
:return: The first result from the output Queue.
"""
return self._out_queue.get(timeout=timeout)
def handle_exception(self, phase, plugin_name,
fuzzable_request, _exception):
"""
Get the exception information, and put it into the output queue
then, the strategy will get the items from the output queue and
handle the exceptions.
:param plugin_name: The plugin that generated the exception
:param fuzzable_request: The fuzzable request that was sent as input to
the plugin when the exception was raised
:param _exception: The exception object
"""
except_type, except_class, tb = sys.exc_info()
enabled_plugins = pprint_plugins(self._w3af_core)
status = w3af_core_status(self._w3af_core)
status.set_running_plugin(phase, plugin_name, log=False)
status.set_current_fuzzable_request(phase, fuzzable_request)
exception_data = ExceptionData(status, _exception, tb,
enabled_plugins)
self._out_queue.put(exception_data)
def add_observer(self, observer):
self._observers.append(observer)
def _log_end_took(self, msg_fmt, start_time, plugin):
spent_time = time.time() - start_time
args = (spent_time, plugin.get_name())
om.out.debug(msg_fmt % args)
class BaseConsumer(Process):
"""
Consumer thread that takes fuzzable requests from a Queue that's populated
by the crawl plugins and identified vulnerabilities by performing various
requests.
"""
THREAD_POOL_SIZE = 10
def __init__(self, consumer_plugins, w3af_core, thread_name,
create_pool=True, max_pool_queued_tasks=0,
max_in_queue_size=0, thread_pool_size=None):
"""
:param consumer_plugins: Instances of base_consumer plugins in a list
:param w3af_core: The w3af core that we'll use for status reporting
:param thread_name: How to name the current thread, eg. Auditor
:param create_pool: True to create a worker pool for this consumer
"""
super(BaseConsumer, self).__init__(name='%sController' % thread_name)
self.in_queue = CachedQueue(maxsize=max_in_queue_size,
name=thread_name)
self._out_queue = Queue.Queue()
self._thread_name = thread_name
self._consumer_plugins = consumer_plugins
self._w3af_core = w3af_core
self._observers = []
self._tasks_in_progress = {}
self._poison_pill_sent = False
self._threadpool = None
if create_pool:
self._threadpool = Pool(thread_pool_size or self.THREAD_POOL_SIZE,
worker_names='%sWorker' % thread_name,
max_queued_tasks=max_pool_queued_tasks)
def run(self):
"""
Consume the queue items, sending them to the plugins which are then
going to find vulnerabilities, new URLs, etc.
"""
while True:
try:
work_unit = self.in_queue.get()
except KeyboardInterrupt:
# https://github.com/andresriancho/w3af/issues/9587
#
# If we don't do this, the thread will die and will never
# process the POISON_PILL, which will end up in an endless
# wait for .join()
continue
if work_unit == POISON_PILL:
# Close the pool and wait for everyone to finish
self._threadpool.close()
self._threadpool.join()
self._threadpool = None
self._teardown()
# Finish this consumer and everyone consuming the output
self._out_queue.put(POISON_PILL)
self.in_queue.task_done()
break
else:
# pylint: disable=E1120
try:
self._consume_wrapper(work_unit)
finally:
self.in_queue.task_done()
def _teardown(self):
raise NotImplementedError
def _consume(self, work_unit):
raise NotImplementedError
@task_decorator
def _consume_wrapper(self, function_id, work_unit):
"""
Just makes sure that all _consume methods are decorated as tasks.
"""
return self._consume(work_unit)
def _task_done(self, function_id):
"""
The task_in_progress_counter is needed because we want to know if the
consumer is processing something and let it finish. It is mainly used
in the has_pending_work().
For example:
* You can have pending work if there are items in the input_queue
* You can have pending work if there are still items to be read from
the output_queue by one of the consumers that reads our output.
* You can have pending work when there are no items in input_queue
and no items in output_queue but the threadpool inside the consumer
is processing something. This situation is handled by the
self._tasks_in_progress attribute and the _add_task and
_task_done methods.
So, for each _add_task() there has to be a _task_done() even if the
task ends in an error or exception.
Recommendation: Do NOT set the callback for apply_async to call
_task_done, the Python2.7 pool implementation won't call it if the
function raised an exception and you'll end up with tasks in progress
that finished with an exception.
"""
try:
self._tasks_in_progress.pop(function_id)
except KeyError:
raise AssertionError('The function %s was not found!' % function_id)
def _add_task(self, function_id):
"""
:param function_id: Just for debugging
@see: _task_done()'s documentation.
"""
self._tasks_in_progress[function_id] = 1
def in_queue_put(self, work):
# Force the queue not to accept anything after POISON_PILL is sent.
# If anything is put to the queue after POISON_PILL, a race condition might happens
# and the consumer might never stop
# https://github.com/andresriancho/w3af/pull/16063
if self._poison_pill_sent:
return
if work is not None:
return self.in_queue.put(work)
def in_queue_put_iter(self, work_iter):
if work_iter is not None:
for work in work_iter:
self.in_queue_put(work)
def has_pending_work(self):
"""
@see: _task_done() documentation
:return: True if the in_queue_size is != 0 OR if one of the pool workers
is still doing something that might impact on out_queue.
"""
if self.in_queue_size() > 0 \
or self.out_queue.qsize() > 0:
return True
if len(self._tasks_in_progress) > 0:
return True
# This is a special case which loosely translates to: "If there are any
# pending tasks in the threadpool, even if they haven't yet called the
# _add_task method, we know we have pending work to do".
if self._threadpool is not None:
if self._threadpool._inqueue.qsize() > 0:
return True
if self._threadpool._outqueue.qsize() > 0:
return True
return False
@property
def out_queue(self):
# This output queue can contain one of the following:
# * POISON_PILL
# * (plugin_name, fuzzable_request, AsyncResult)
# * An ExceptionData instance
return self._out_queue
def in_queue_size(self):
return self.in_queue.qsize()
def join(self):
"""
Poison the loop and wait for all queued work to finish this might take
some time to process.
"""
start_time = time.time()
if not self.is_alive():
# This return has a long history, follow it here:
# https://github.com/andresriancho/w3af/issues/1172
return
if not self._poison_pill_sent:
# send the poison pill
self.in_queue_put(POISON_PILL)
# https://github.com/andresriancho/w3af/issues/9587
# let put() know that all new tasks should be ignored
self._poison_pill_sent = True
self.in_queue.join()
if self._threadpool is not None:
self._threadpool.close()
self._threadpool.join()
spent_time = time.time() - start_time
om.out.debug('%s took %.2f seconds to join()' % (self._thread_name, spent_time))
def terminate(self):
"""
Remove all queued work from in_queue and poison the loop so the consumer
exits. Should be very fast and called only if we don't care about the
queued work anymore (ie. user clicked stop in the UI).
"""
while not self.in_queue.empty():
self.in_queue.get()
self.in_queue.task_done()
self.join()
def get_result(self, timeout=0.5):
"""
:return: The first result from the output Queue.
"""
return self._out_queue.get(timeout=timeout)
def handle_exception(self, phase, plugin_name,
fuzzable_request, _exception):
"""
Get the exception information, and put it into the output queue
then, the strategy will get the items from the output queue and
handle the exceptions.
:param plugin_name: The plugin that generated the exception
:param fuzzable_request: The fuzzable request that was sent as input to
the plugin when the exception was raised
:param _exception: The exception object
"""
except_type, except_class, tb = sys.exc_info()
enabled_plugins = pprint_plugins(self._w3af_core)
status = w3af_core_status(self._w3af_core)
status.set_running_plugin(phase, plugin_name, log=False)
status.set_current_fuzzable_request(phase, fuzzable_request)
exception_data = ExceptionData(status, _exception, tb,
enabled_plugins)
self._out_queue.put(exception_data)
def add_observer(self, observer):
self._observers.append(observer)