def copyButton_clicked(self):
self.copyButton.setEnabled(False)
try:
try:
self.dev.open()
except Error:
self.form.FailureUI(self.__tr("<b>Cannot copy: Device is busy or not available.</b><p>Please check device and try again. [1]"))
return
self.dev.sendEvent(EVENT_START_COPY_JOB, self.cur_printer, 0, '')
#self.pb = QProgressBar()
#self.pb.setTotalSteps(2)
#self.form.statusBar().addWidget(self.pb)
#self.pb.show()
log.debug("Num copies: %d" % self.num_copies)
log.debug("Contrast: %d" % self.contrast)
log.debug("Reduction: %d" % self.reduction)
s = 'Normal'
if self.quality == pml.COPIER_QUALITY_FAST:
s = 'Fast'
elif self.quality == pml.COPIER_QUALITY_DRAFT:
s = 'Draft'
elif self.quality == pml.COPIER_QUALITY_NORMAL:
s = 'Normal'
elif self.quality == pml.COPIER_QUALITY_PRESENTATION:
s = 'Presentation'
elif self.quality == pml.COPIER_QUALITY_BEST:
s = 'Best'
log.debug("Quality: %d (%s)" % (self.quality, s))
if self.fit_to_page == pml.COPIER_FIT_TO_PAGE_ENABLED:
s = 'Enabled' # 2
else:
s = 'Disabled' # 1
log.debug("Fit to page: %s (%s)" % (self.fit_to_page, s))
log.debug("Scan style: %d" % self.scan_style)
# Open the dialog box.
#
self.waitdlg = WaitForm(0, self.__tr("Copying..."), self.copy_canceled, self, modal=1)
self.waitdlg.show()
self.copy_timer = QTimer(self, "CopyTimer")
self.connect(self.copy_timer, SIGNAL('timeout()'), self.copy_timer_timeout)
self.copy_timer.start(1000) # 1 sec UI updates
self.dev.copy(self.num_copies, self.contrast, self.reduction,
self.quality, self.fit_to_page, self.scan_style,
self.update_queue, self.event_queue)
finally:
#self.cur_device.close()
#self.copyButton.setEnabled(True)
pass
class ScrollCopyView(ScrollView):
def __init__(self, service, num_copies=None, contrast=None, quality=None,
reduction=None, fit_to_page=None, parent=None, form=None, name=None, fl=0):
ScrollView.__init__(self, service, parent, name, fl)
self.form = form
self.num_copies = num_copies
self.contrast = contrast
self.quality = quality
self.reduction = reduction
self.fit_to_page = fit_to_page
self.update_queue = Queue.Queue() # UI updates from copy thread
self.event_queue = Queue.Queue() # UI events to copy thread
def getDeviceSettings(self):
QApplication.setOverrideCursor(QApplication.waitCursor)
try:
# get sticky settings as defaults (if not spec'd on command line)
if self.num_copies is None:
result_code, self.num_copies = self.dev.getPML(pml.OID_COPIER_NUM_COPIES)
if self.contrast is None:
result_code, self.contrast = self.dev.getPML(pml.OID_COPIER_CONTRAST)
if self.reduction is None:
result_code, self.reduction = self.dev.getPML(pml.OID_COPIER_REDUCTION)
if self.quality is None:
result_code, self.quality = self.dev.getPML(pml.OID_COPIER_QUALITY)
if self.scan_style == SCAN_STYLE_FLATBED and self.fit_to_page is None:
result_code, self.fit_to_page = self.dev.getPML(pml.OID_COPIER_FIT_TO_PAGE)
if result_code != pml.ERROR_OK:
self.fit_to_page = pml.COPIER_FIT_TO_PAGE_DISABLED
self.fitToPageCheckBox.setEnabled(False)
else:
self.fit_to_page = pml.COPIER_FIT_TO_PAGE_DISABLED
if self.scan_style != SCAN_STYLE_FLATBED:
self.fitToPageCheckBox.setEnabled(False)
result_code, self.max_reduction = self.dev.getPML(pml.OID_COPIER_REDUCTION_MAXIMUM)
result_code, self.max_enlargement = self.dev.getPML(pml.OID_COPIER_ENLARGEMENT_MAXIMUM)
# contrast
a = self.contrast/25
self.contrastSpinBox.setValue(a)
if a >= 0:
self.contrastSpinBox.setPrefix("+")
else:
self.contrastSpinBox.setPrefix("")
self.contrastSlider.setValue(a)
self.contrastSlider.setTickmarks(QSlider.Below)
self.contrastSlider.setTickInterval(1)
self.contrastDefaultPushButton.setEnabled(a != 0)
# reduction/enlargement/fittopage
self.reductionSlider.setRange(self.max_reduction, self.max_enlargement)
self.reductionSlider.setTickmarks(QSlider.Below)
self.reductionSlider.setTickInterval(10)
self.reductionSlider.setValue(self.reduction)
self.reductionSpinBox.setMaxValue(self.max_enlargement)
self.reductionSpinBox.setMinValue(self.max_reduction)
self.reductionSpinBox.setValue(self.reduction)
self.reductionSpinBox.setSuffix("%")
if self.fit_to_page == pml.COPIER_FIT_TO_PAGE_ENABLED:
self.fitToPageCheckBox.setChecked(True)
self.reductionSpinBox.setEnabled(False)
self.reductionSlider.setEnabled(False)
self.reductionDefaultPushButton.setEnabled(True)
else:
self.fitToPageCheckBox.setChecked(False)
self.reductionSlider.setEnabled(True)
self.reductionSpinBox.setEnabled(True)
self.reductionDefaultPushButton.setEnabled(self.reduction != 100)
# num_copies
self.copiesSpinBox.setValue(self.num_copies)
self.copiesDefaultPushButton.setEnabled(self.num_copies != 1)
# quality
if self.quality == pml.COPIER_QUALITY_FAST:
self.qualityComboBox.setCurrentItem(0)
s = 'Fast'
elif self.quality == pml.COPIER_QUALITY_DRAFT:
self.qualityComboBox.setCurrentItem(1)
s = 'Draft'
elif self.quality == pml.COPIER_QUALITY_NORMAL:
self.qualityComboBox.setCurrentItem(2)
s = 'Normal'
elif self.quality == pml.COPIER_QUALITY_PRESENTATION:
self.qualityComboBox.setCurrentItem(3)
s = 'Presentation'
elif self.quality == pml.COPIER_QUALITY_BEST:
self.qualityComboBox.setCurrentItem(4)
s = 'Best'
log.debug("Default Quality: %d (%s)" % (self.quality, s))
self.qualityDefaultPushButton.setEnabled(self.quality != pml.COPIER_QUALITY_NORMAL)
log.debug("Default Num copies: %d" % self.num_copies)
log.debug("Default Contrast: %d" % self.contrast)
log.debug("Default Reduction: %d" % self.reduction)
log.debug("Maximum Reduction: %d" % self.max_reduction)
log.debug("Maximum Enlargement: %d" % self.max_enlargement)
if self.fit_to_page == pml.COPIER_FIT_TO_PAGE_ENABLED:
s = 'Enabled' # 2
else:
s = 'Disabled' # 1
log.debug("Default Fit to page: %s (%s)" % (self.fit_to_page, s))
log.debug("Scan style (models.dat: scan-style): %d" % self.scan_style)
finally:
self.dev.closePML()
QApplication.restoreOverrideCursor()
def fillControls(self):
ScrollView.fillControls(self)
self.addGroupHeading("copies", self.__tr("Number of Copies"))
self.addCopies()
self.addGroupHeading("reduction", self.__tr("Enlargement, Reduction and Fit to Page"))
self.addEnlargementReduction()
self.addGroupHeading("contrast", self.__tr("Copy Contrast"))
self.addContrast()
self.addGroupHeading("quality", self.__tr("Copy Quality"))
self.addQuality()
self.addGroupHeading("space1", "")
self.copyButton = self.addActionButton("bottom_nav", self.__tr("Make Copies(s)"),
self.copyButton_clicked, 'print.png', 'print.png',
self.__tr("Close"), self.funcButton_clicked)
def onUpdate(self, cur_device=None):
log.debug("ScrollPrintView.onUpdate()")
def onDeviceChange(self, cur_device=None):
ScrollView.onDeviceChange(self, cur_device)
self.dev = copier.PMLCopyDevice(device_uri=self.cur_device.device_uri,
printer_name=self.cur_printer)
self.scan_style = self.dev.mq.get('scan-style', SCAN_STYLE_FLATBED)
self.copy_type = self.dev.mq.get('copy-type', COPY_TYPE_DEVICE)
if self.scan_style == SCAN_STYLE_SCROLLFED:
self.fitToPageCheckBox.setEnabled(False)
self.fit_to_page = pml.COPIER_FIT_TO_PAGE_DISABLED
self.getDeviceSettings()
def addCopies(self):
widget = self.getWidget()
layout12 = QHBoxLayout(widget,5,10,"layout12")
self.textLabel5 = QLabel(widget,"textLabel5")
layout12.addWidget(self.textLabel5)
spacer20 = QSpacerItem(20,20,QSizePolicy.Expanding,QSizePolicy.Minimum)
layout12.addItem(spacer20)
self.copiesSpinBox = QSpinBox(widget,"copiesSpinBox")
layout12.addWidget(self.copiesSpinBox)
self.copiesDefaultPushButton = QPushButton(widget,"copiesDefaultPushButton")
layout12.addWidget(self.copiesDefaultPushButton)
self.textLabel5.setText(self.__tr("Number of copies:"))
self.copiesDefaultPushButton.setText(self.__tr("Default"))
self.copiesSpinBox.setMaxValue(99)
self.copiesSpinBox.setMinValue(1)
self.copiesSpinBox.setValue(1)
self.copiesDefaultPushButton.setEnabled(False)
self.connect(self.copiesDefaultPushButton, SIGNAL("clicked()"), self.copiesDefaultPushButton_clicked)
self.connect(self.copiesSpinBox, SIGNAL("valueChanged(int)"), self.copiesSpinBox_valueChanged)
self.addWidget(widget, "copies")
def copiesDefaultPushButton_clicked(self):
self.copiesSpinBox.setValue(1)
self.copiesDefaultPushButton.setEnabled(False)
def copiesSpinBox_valueChanged(self, i):
self.copiesDefaultPushButton.setEnabled(i != 1)
self.num_copies = i
def addQuality(self):
widget = self.getWidget()
layout34 = QHBoxLayout(widget,5,10,"layout34")
self.textLabel5_4 = QLabel(widget,"textLabel5_4")
self.textLabel5_4.setText(self.__tr("Quality:"))
layout34.addWidget(self.textLabel5_4)
spacer20_4 = QSpacerItem(20,20,QSizePolicy.Expanding,QSizePolicy.Minimum)
layout34.addItem(spacer20_4)
self.qualityComboBox = QComboBox(0,widget,"qualityComboBox")
layout34.addWidget(self.qualityComboBox)
self.qualityDefaultPushButton = QPushButton(widget,"qualityDefaultPushButton")
layout34.addWidget(self.qualityDefaultPushButton)
self.qualityComboBox.clear()
self.qualityComboBox.insertItem(self.__tr("Fast")) # 0
self.qualityComboBox.insertItem(self.__tr("Draft")) # 1
self.qualityComboBox.insertItem(self.__tr("Normal")) # 2
self.qualityComboBox.insertItem(self.__tr("Presentation")) # 3
self.qualityComboBox.insertItem(self.__tr("Best")) # 4
self.qualityComboBox.setCurrentItem(2) # Normal
self.qualityDefaultPushButton.setText(self.__tr("Default"))
self.qualityDefaultPushButton.setEnabled(False)
self.connect(self.qualityComboBox, SIGNAL("activated(int)"), self.qualityComboBox_activated)
self.connect(self.qualityDefaultPushButton, SIGNAL("clicked()"), self.qualityDefaultPushButton_clicked)
self.addWidget(widget, "quality")
def qualityDefaultPushButton_clicked(self):
self.qualityDefaultPushButton.setEnabled(False)
self.qualityComboBox.setCurrentItem(2) # Normal
self.quality = pml.COPIER_QUALITY_NORMAL
def qualityComboBox_activated(self, i):
self.qualityDefaultPushButton.setEnabled(i != 2) # Normal
if i == 0:
self.quality = pml.COPIER_QUALITY_FAST
elif i == 1:
self.quality = pml.COPIER_QUALITY_DRAFT
elif i == 2:
self.quality = pml.COPIER_QUALITY_NORMAL
elif i == 3:
self.quality = pml.COPIER_QUALITY_PRESENTATION
elif i == 4:
self.quality = pml.COPIER_QUALITY_BEST
def addEnlargementReduction(self):
widget = self.getWidget()
layout43 = QGridLayout(widget,1,1,5,10,"layout43")
self.reductionSlider = QSlider(widget,"reductionSlider")
self.reductionSlider.setOrientation(QSlider.Horizontal)
layout43.addWidget(self.reductionSlider,0,2)
self.reductionSpinBox = QSpinBox(widget, "reductionSpinBox")
self.reductionSpinBox.setMaxValue(100)
self.reductionSpinBox.setMinValue(0)
self.reductionSpinBox.setValue(100)
self.reductionSpinBox.setSuffix("%")
layout43.addWidget(self.reductionSpinBox,0,3)
spacer42 = QSpacerItem(20,20,QSizePolicy.Expanding,QSizePolicy.Minimum)
layout43.addItem(spacer42,0,1)
self.fitToPageCheckBox = QCheckBox(widget,"fitToPageCheckBox")
layout43.addWidget(self.fitToPageCheckBox,1,2)
self.reductionDefaultPushButton = QPushButton(widget,"reductionDefaultPushButton")
layout43.addWidget(self.reductionDefaultPushButton,0,4)
self.textLabel1 = QLabel(widget,"textLabel1")
layout43.addWidget(self.textLabel1,0,0)
self.textLabel1.setText(self.__tr("Enlargement or reduction (percent):"))
self.fitToPageCheckBox.setText(self.__tr("Fit to Page"))
self.reductionDefaultPushButton.setText(self.__tr("Default"))
self.reductionSlider.setRange(25, 400)
self.connect(self.reductionSlider,SIGNAL("valueChanged(int)"),self.reductionSlider_valueChanged)
self.connect(self.fitToPageCheckBox,SIGNAL("clicked()"),self.fitToPageCheckBox_clicked)
self.connect(self.reductionDefaultPushButton, SIGNAL("clicked()"), self.reductionDefaultPushButton_clicked)
self.connect(self.reductionSpinBox, SIGNAL("valueChanged(int)"), self.reductionSpinBox_valueChanged)
self.addWidget(widget, "reduction")
def reductionSlider_valueChanged(self,a0):
self.reduction = a0
self.reductionSpinBox.setValue(a0)
self.reductionDefaultPushButton.setEnabled(a0 != 100)
def reductionSpinBox_valueChanged(self, a0):
self.reduction = a0
self.reductionSlider.setValue(a0)
self.reductionDefaultPushButton.setEnabled(a0 != 100)
def fitToPageCheckBox_clicked(self):
if self.fitToPageCheckBox.isChecked():
self.fit_to_page = pml.COPIER_FIT_TO_PAGE_ENABLED
self.reductionSpinBox.setEnabled(False)
self.reductionSlider.setEnabled(False)
self.reductionDefaultPushButton.setEnabled(True)
else:
self.fit_to_page = pml.COPIER_FIT_TO_PAGE_DISABLED
self.reductionSlider.setEnabled(True)
self.reductionSpinBox.setEnabled(True)
self.reductionDefaultPushButton.setEnabled(self.reductionSlider.value() != 100)
def reductionDefaultPushButton_clicked(self):
self.reduction = 100
self.reductionSlider.setValue(100)
self.reductionSlider.setEnabled(True)
self.reductionSpinBox.setValue(100)
self.reductionSpinBox.setEnabled(True)
self.fitToPageCheckBox.setChecked(False)
self.fit_to_page = False
def addContrast(self):
widget = self.getWidget()
layout41 = QGridLayout(widget,1,1,5,10,"layout41")
self.textLabel1_2 = QLabel(widget,"textLabel1_2")
layout41.addWidget(self.textLabel1_2,0,0)
self.contrastDefaultPushButton = QPushButton(widget,"contrastDefaultPushButton")
layout41.addWidget(self.contrastDefaultPushButton,0,4)
spacer41 = QSpacerItem(20,20,QSizePolicy.Expanding,QSizePolicy.Minimum)
layout41.addItem(spacer41,0,1)
self.contrastSlider = QSlider(widget,"contrastSlider")
self.contrastSlider.setMinValue(-5)
self.contrastSlider.setMaxValue(5)
self.contrastSlider.setPageStep(1)
self.contrastSlider.setOrientation(QSlider.Horizontal)
layout41.addWidget(self.contrastSlider,0,2)
self.contrastSpinBox = QSpinBox(widget, "contrastSpinBox")
self.contrastSpinBox.setMinValue(-5)
self.contrastSpinBox.setMaxValue(5)
layout41.addWidget(self.contrastSpinBox,0,3)
self.textLabel1_2.setText(self.__tr("Contrast (-5 lighter to +5 darker):"))
self.contrastDefaultPushButton.setText(self.__tr("Default"))
self.connect(self.contrastSlider,SIGNAL("valueChanged(int)"),self.contrastSlider_valueChanged)
self.connect(self.contrastSpinBox, SIGNAL("valueChanged(int)"), self.contrastSpinBox_valueChanged)
self.connect(self.contrastDefaultPushButton, SIGNAL("clicked()"), self.contrastDefaultPushButton_clicked)
self.addWidget(widget, "contrast")
def contrastSlider_valueChanged(self, a0):
self.contrastSpinBox.setValue(a0)
self.contrast = a0 * 25
self.contrastDefaultPushButton.setEnabled(a0 != 0)
def contrastSpinBox_valueChanged(self, a0):
if a0 >= 0:
self.contrastSpinBox.setPrefix("+")
else:
self.contrastSpinBox.setPrefix("")
self.contrastSlider.setValue(a0)
self.contrast = a0 * 25
self.contrastDefaultPushButton.setEnabled(a0 != 0)
def contrastDefaultPushButton_clicked(self):
self.contrastSpinBox.setValue(0)
self.contrastSpinBox.setPrefix("+")
self.contrastSlider.setValue(0)
self.contrast = 0
def copy_canceled(self):
self.event_queue.put(copier.COPY_CANCELED)
self.dev.sendEvent(EVENT_COPY_JOB_CANCELED)
def copy_timer_timeout(self):
while self.update_queue.qsize():
try:
status = self.update_queue.get(0)
except Queue.Empty:
break
if status == copier.STATUS_IDLE:
self.copy_timer.stop()
#self.pb.hide()
#self.form.statusBar().removeWidget(self.pb)
elif status in (copier.STATUS_SETTING_UP, copier.STATUS_WARMING_UP):
#self.pb.setProgress(self.pb.progress()+1)
pass
elif status == copier.STATUS_ACTIVE:
#self.pb.setProgress(self.pb.progress()+1)
pass
elif status in (copier.STATUS_ERROR, copier.STATUS_DONE):
self.copy_timer.stop()
#self.pb.hide()
#self.form.statusBar().removeWidget(self.pb)
# Close the dialog box.
#
if self.waitdlg is not None:
self.waitdlg.hide()
self.waitdlg.close()
self.waitdlg = None
if status == copier.STATUS_ERROR:
self.form.FailureUI(self.__tr("<b>Copier error.</b><p>"))
self.dev.sendEvent(EVENT_COPY_JOB_FAIL)
elif status == copier.STATUS_DONE:
pass
self.dev.sendEvent(EVENT_END_COPY_JOB)
self.cur_device.close()
self.copyButton.setEnabled(True)
self.form.close()
def copyButton_clicked(self):
self.copyButton.setEnabled(False)
try:
try:
self.dev.open()
except Error:
self.form.FailureUI(self.__tr("<b>Cannot copy: Device is busy or not available.</b><p>Please check device and try again. [1]"))
return
self.dev.sendEvent(EVENT_START_COPY_JOB, self.cur_printer, 0, '')
#self.pb = QProgressBar()
#self.pb.setTotalSteps(2)
#self.form.statusBar().addWidget(self.pb)
#self.pb.show()
log.debug("Num copies: %d" % self.num_copies)
log.debug("Contrast: %d" % self.contrast)
log.debug("Reduction: %d" % self.reduction)
s = 'Normal'
if self.quality == pml.COPIER_QUALITY_FAST:
s = 'Fast'
elif self.quality == pml.COPIER_QUALITY_DRAFT:
s = 'Draft'
elif self.quality == pml.COPIER_QUALITY_NORMAL:
s = 'Normal'
elif self.quality == pml.COPIER_QUALITY_PRESENTATION:
s = 'Presentation'
elif self.quality == pml.COPIER_QUALITY_BEST:
s = 'Best'
log.debug("Quality: %d (%s)" % (self.quality, s))
if self.fit_to_page == pml.COPIER_FIT_TO_PAGE_ENABLED:
s = 'Enabled' # 2
else:
s = 'Disabled' # 1
log.debug("Fit to page: %s (%s)" % (self.fit_to_page, s))
log.debug("Scan style: %d" % self.scan_style)
# Open the dialog box.
#
self.waitdlg = WaitForm(0, self.__tr("Copying..."), self.copy_canceled, self, modal=1)
self.waitdlg.show()
self.copy_timer = QTimer(self, "CopyTimer")
self.connect(self.copy_timer, SIGNAL('timeout()'), self.copy_timer_timeout)
self.copy_timer.start(1000) # 1 sec UI updates
self.dev.copy(self.num_copies, self.contrast, self.reduction,
self.quality, self.fit_to_page, self.scan_style,
self.update_queue, self.event_queue)
finally:
#self.cur_device.close()
#self.copyButton.setEnabled(True)
pass
def funcButton_clicked(self):
self.dev.close()
self.form.close()
def __tr(self,s,c = None):
return qApp.translate("ScrollCopy",s,c)