def do_install_disk(cls, disk, disk_name, creator, workdir, oe_builddir,
bootimg_dir, kernel_dir, native_sysroot):
"""
Called after all partitions have been prepared and assembled into a
disk image. In this case, we install the MBR.
"""
bootimg_dir = cls._get_bootimg_dir(bootimg_dir, 'syslinux')
mbrfile = "%s/syslinux/" % bootimg_dir
mbrfile += "mbr.bin"
full_path = creator._full_path(workdir, disk_name, "direct")
logger.debug("Installing MBR on disk %s as %s with size %s bytes",
disk_name, full_path, disk.min_size)
device_map_path = "%s/device.map" % workdir
device_map_content = "(hd0) %s" % full_path
with open(device_map_path, 'w') as file:
file.write(device_map_content)
dd_cmd = "dd if=%s of=%s conv=notrunc" % (mbrfile, full_path)
exec_cmd(dd_cmd, native_sysroot)
grub_dir = "%s/hdd/boot/grub/i386-pc" % workdir
cmd_bios_setup = 'grub-bios-setup -v --device-map=%s -r "hd0,msdos1" -d %s %s' % (
device_map_path,
grub_dir,
full_path
)
exec_cmd(cmd_bios_setup, native_sysroot)
def finalize(self):
"""
Finalize the disk image.
For example, prepare the image to be bootable by e.g.
creating and installing a bootloader configuration.
"""
source_plugin = self.ks.bootloader.source
disk_name = self.parts[0].disk
if source_plugin:
plugin = PluginMgr.get_plugins('source')[source_plugin]
plugin.do_install_disk(self._image, disk_name, self, self.workdir,
self.oe_builddir, self.bootimg_dir,
self.kernel_dir, self.native_sysroot)
full_path = self._image.path
# Generate .bmap
if self.bmap:
logger.debug("Generating bmap file for %s", disk_name)
python = os.path.join(self.native_sysroot, 'usr/bin/python3-native/python3')
bmaptool = os.path.join(self.native_sysroot, 'usr/bin/bmaptool')
exec_native_cmd("%s %s create %s -o %s.bmap" % \
(python, bmaptool, full_path, full_path), self.native_sysroot)
# Compress the image
if self.compressor:
logger.debug("Compressing disk %s with %s", disk_name, self.compressor)
exec_cmd("%s %s" % (self.compressor, full_path))
def do_configure_partition(cls, part, source_params, creator, cr_workdir,
oe_builddir, bootimg_dir, kernel_dir,
native_sysroot):
hdddir = "%s/hdd/modules" % cr_workdir
install_cmd = "install -d %s" % hdddir
exec_cmd(install_cmd)
def copy(self, src, pnum, path):
"""Copy partition image into wic image."""
cmd = "{} -i {} -snop {} ::{}".format(self.mcopy,
self._get_part_image(pnum),
src, path)
exec_cmd(cmd)
self._put_part_image(pnum)
def prepare_rootfs_msdos(self, rootfs, cr_workdir, oe_builddir, rootfs_dir,
native_sysroot, pseudo):
"""
Prepare content for a msdos/vfat rootfs partition.
"""
du_cmd = "du -bks %s" % rootfs_dir
out = exec_cmd(du_cmd)
blocks = int(out.split()[0])
rootfs_size = self.get_rootfs_size(blocks)
label_str = "-n boot"
if self.label:
label_str = "-n %s" % self.label
size_str = ""
extraopts = self.mkfs_extraopts or '-S 512'
dosfs_cmd = "mkdosfs %s -i %s %s %s -C %s %d" % \
(label_str, self.fsuuid, size_str, extraopts, rootfs,
rootfs_size)
exec_native_cmd(dosfs_cmd, native_sysroot)
mcopy_cmd = "mcopy -i %s -s %s/* ::/" % (rootfs, rootfs_dir)
exec_native_cmd(mcopy_cmd, native_sysroot)
if self.updated_fstab_path and self.has_fstab and not self.no_fstab_update:
mcopy_cmd = "mcopy -i %s %s ::/etc/fstab" % (
rootfs, self.updated_fstab_path)
exec_native_cmd(mcopy_cmd, native_sysroot)
chmod_cmd = "chmod 644 %s" % rootfs
exec_cmd(chmod_cmd)
def prepare_rootfs_msdos(self, rootfs, oe_builddir, rootfs_dir,
native_sysroot, pseudo):
"""
Prepare content for a msdos/vfat rootfs partition.
"""
du_cmd = "du -bks %s" % rootfs_dir
out = exec_cmd(du_cmd)
blocks = int(out.split()[0])
rootfs_size = self.get_rootfs_size(blocks)
label_str = "-n boot"
if self.label:
label_str = "-n %s" % self.label
size_str = ""
if self.fstype == 'msdos':
size_str = "-F 16" # FAT 16
extraopts = self.mkfs_extraopts or '-S 512'
dosfs_cmd = "mkdosfs %s %s %s -C %s %d" % \
(label_str, size_str, extraopts, rootfs, rootfs_size)
exec_native_cmd(dosfs_cmd, native_sysroot)
mcopy_cmd = "mcopy -i %s -s %s/* ::/" % (rootfs, rootfs_dir)
exec_native_cmd(mcopy_cmd, native_sysroot)
chmod_cmd = "chmod 644 %s" % rootfs
exec_cmd(chmod_cmd)
def do_install_disk(cls, disk, disk_name, creator, workdir, oe_builddir,
bootimg_dir, kernel_dir, native_sysroot):
"""
Called after all partitions have been prepared and assembled into a
disk image. In this case, we install the MBR.
"""
bootimg_dir = cls._get_bootimg_dir(bootimg_dir, 'syslinux')
mbrfile = "%s/syslinux/" % bootimg_dir
if creator.ptable_format == 'msdos':
mbrfile += "mbr.bin"
elif creator.ptable_format == 'gpt':
mbrfile += "gptmbr.bin"
else:
raise WicError("Unsupported partition table: %s" %
creator.ptable_format)
if not os.path.exists(mbrfile):
raise WicError("Couldn't find %s. If using the -e option, do you "
"have the right MACHINE set in local.conf? If not, "
"is the bootimg_dir path correct?" % mbrfile)
full_path = creator._full_path(workdir, disk_name, "direct")
logger.debug("Installing MBR on disk %s as %s with size %s bytes",
disk_name, full_path, disk.min_size)
dd_cmd = "dd if=%s of=%s conv=notrunc" % (mbrfile, full_path)
exec_cmd(dd_cmd, native_sysroot)
def do_configure_partition(cls, part, source_params, creator, cr_workdir,
oe_builddir, bootimg_dir, kernel_dir,
native_sysroot):
"""
Called before do_prepare_partition(), creates loader-specific config
"""
hdddir = "%s/hdd/boot" % cr_workdir
install_cmd = "install -d %s/EFI/BOOT" % hdddir
exec_cmd(install_cmd)
try:
if source_params['loader'] == 'grub-efi':
cls.do_configure_grubefi(hdddir, creator, cr_workdir,
source_params)
elif source_params['loader'] == 'systemd-boot':
cls.do_configure_systemdboot(hdddir, creator, cr_workdir,
source_params)
else:
raise WicError("unrecognized bootimg-efi loader: %s" %
source_params['loader'])
except KeyError:
raise WicError("bootimg-efi requires a loader, none specified")
if source_params['version']:
install_cmd = "install -d %s/aos" % hdddir
exec_cmd(install_cmd)
version = open("%s/hdd/boot/aos/version" % cr_workdir, "w")
version.write('VERSION = "%s"\n' % source_params['version'])
version.close()
def write_ptable(parts, target):
with tempfile.NamedTemporaryFile(prefix="wic-sfdisk-",
mode='w') as outf:
write_sfdisk_script(outf, parts)
cmd = "{} --no-reread {} < {} ".format(self.sfdisk, target,
outf.name)
exec_cmd(cmd, as_shell=True)
def do_configure_partition(cls, part, source_params, creator, cr_workdir,
oe_builddir, bootimg_dir, kernel_dir,
native_sysroot):
"""
Called before do_prepare_partition(), creates loader-specific config
"""
hdddir = "%s/hdd/%s.%s" % (cr_workdir, part.label, part.lineno)
install_cmd = "install -d %s" % hdddir
exec_cmd(install_cmd)
bootloader = creator.ks.bootloader
cmdline = "root=%s %s\n" % \
(creator.rootdev, bootloader.append)
cwd = os.getcwd()
os.chdir(hdddir)
config_cmd = 'bg_setenv -f . -k "C:%s:bzImage" -a "%s" -r %s -w %s' % \
(part.label.upper(), \
cmdline.strip(), \
source_params.get("revision", 1), \
source_params.get("watchdog", 5))
exec_native_cmd(config_cmd, native_sysroot)
os.chdir(cwd)
def copy(self, src, dest):
"""Copy partition image into wic image."""
pnum = dest.part if isinstance(src, str) else src.part
if self.partitions[pnum].fstype.startswith('ext'):
if isinstance(src, str):
cmd = "printf 'cd {}\nwrite {} {}\n' | {} -w {}".\
format(os.path.dirname(dest.path), src, os.path.basename(src),
self.debugfs, self._get_part_image(pnum))
else: # copy from wic
# run both dump and rdump to support both files and directory
cmd = "printf 'cd {}\ndump /{} {}\nrdump /{} {}\n' | {} {}".\
format(os.path.dirname(src.path), src.path,
dest, src.path, dest, self.debugfs,
self._get_part_image(pnum))
else: # fat
if isinstance(src, str):
cmd = "{} -i {} -snop {} ::{}".format(
self.mcopy, self._get_part_image(pnum), src, dest.path)
else:
cmd = "{} -i {} -snop ::{} {}".format(
self.mcopy, self._get_part_image(pnum), src.path, dest)
exec_cmd(cmd, as_shell=True)
self._put_part_image(pnum)
def do_prepare_partition(cls, part, source_params, cr, cr_workdir,
oe_builddir, bootimg_dir, kernel_dir,
rootfs_dir, native_sysroot):
"""
Called to do the actual content population for a partition i.e. it
'prepares' the partition to be incorporated into the image.
In this case, does the following:
- sets up a vfat partition
- copies all files listed in IMAGE_BOOT_FILES variable
"""
hdddir = "%s/boot.%d" % (cr_workdir, part.lineno)
if not kernel_dir:
kernel_dir = get_bitbake_var("DEPLOY_DIR_IMAGE")
if not kernel_dir:
raise WicError("Couldn't find DEPLOY_DIR_IMAGE, exiting")
logger.debug('Kernel dir: %s', bootimg_dir)
for task in cls.install_task:
src_path, dst_path = task
logger.debug('Install %s as %s', src_path, dst_path)
install_cmd = "install -m 0644 -D %s %s" \
% (os.path.join(kernel_dir, src_path),
os.path.join(hdddir, dst_path))
exec_cmd(install_cmd)
logger.debug('Prepare boot partition using rootfs in %s', hdddir)
part.prepare_rootfs(cr_workdir, oe_builddir, hdddir,
native_sysroot, False)
def do_install_disk(cls, disk, disk_name, creator, workdir, oe_builddir,
bootimg_dir, kernel_dir, native_sysroot):
"""
Called after all partitions have been prepared and assembled into a
disk image. In this case, we install the MBR.
"""
syslinux_dir = cls._get_syslinux_dir(bootimg_dir)
if creator.ptable_format == 'msdos':
mbrfile = os.path.join(syslinux_dir, "mbr/mbr.bin")
elif creator.ptable_format == 'gpt':
mbrfile = os.path.join(syslinux_dir, "mbr/gptmbr.bin")
else:
raise WicError("Unsupported partition table: %s" %
creator.ptable_format)
if not os.path.exists(mbrfile):
raise WicError(
"Couldn't find %s. If using the -e option, do you "
"have the right MACHINE set in local.conf? If not, "
"is the bootimg_dir path correct?" % mbrfile)
full_path = creator._full_path(workdir, disk_name, "direct")
logger.debug("Installing MBR on disk %s as %s with size %s bytes",
disk_name, full_path, disk.min_size)
dd_cmd = "dd if=%s of=%s conv=notrunc" % (mbrfile, full_path)
exec_cmd(dd_cmd, native_sysroot)
def prepare_empty_partition_msdos(self, rootfs, oe_builddir,
native_sysroot):
"""
Prepare an empty vfat partition.
"""
blocks = self.disk_size
label_str = "-n boot"
if self.label:
label_str = "-n %s" % self.label
size_str = ""
if self.fstype == 'msdos':
size_str = "-F 16" # FAT 16
extraopts = self.mkfs_extraopts or '-S 512'
dosfs_cmd = "mkdosfs %s -i %s %s %s -C %s %d" % \
(label_str, self.fsuuid, extraopts, size_str, rootfs,
blocks)
exec_native_cmd(dosfs_cmd, native_sysroot)
chmod_cmd = "chmod 644 %s" % rootfs
exec_cmd(chmod_cmd)
def prepare_empty_partition_msdos(self, rootfs, oe_builddir,
native_sysroot):
"""
Prepare an empty vfat partition.
"""
blocks = self.disk_size
label_str = "-n boot"
if self.label:
label_str = "-n %s" % self.label
size_str = ""
if self.fstype == 'msdos':
size_str = "-F 16" # FAT 16
extraopts = self.mkfs_extraopts or '-S 512'
dosfs_cmd = "mkdosfs %s -i %s %s %s -C %s %d" % \
(label_str, self.fsuuid, extraopts, size_str, rootfs,
blocks)
exec_native_cmd(dosfs_cmd, native_sysroot)
chmod_cmd = "chmod 644 %s" % rootfs
exec_cmd(chmod_cmd)
def finalize(self):
"""
Finalize the disk image.
For example, prepare the image to be bootable by e.g.
creating and installing a bootloader configuration.
"""
source_plugin = self.ks.bootloader.source
disk_name = self.parts[0].disk
if source_plugin:
plugin = PluginMgr.get_plugins('source')[source_plugin]
plugin.do_install_disk(self._image, disk_name, self, self.workdir,
self.oe_builddir, self.bootimg_dir,
self.kernel_dir, self.native_sysroot)
full_path = self._image.path
# Generate .bmap
if self.bmap:
logger.debug("Generating bmap file for %s", disk_name)
python = os.path.join(self.native_sysroot,
'usr/bin/python3-native/python3')
bmaptool = os.path.join(self.native_sysroot, 'usr/bin/bmaptool')
exec_native_cmd("%s %s create %s -o %s.bmap" % \
(python, bmaptool, full_path, full_path), self.native_sysroot)
# Compress the image
if self.compressor:
logger.debug("Compressing disk %s with %s", disk_name,
self.compressor)
exec_cmd("%s %s" % (self.compressor, full_path))
def do_prepare_partition(cls, part, source_params, cr, cr_workdir,
oe_builddir, bootimg_dir, kernel_dir, rootfs_dir,
native_sysroot):
"""
Called to do the actual content population for a partition i.e. it
'prepares' the partition to be incorporated into the image.
In this case, does the following:
- sets up a vfat partition
- copies all files listed in IMAGE_BOOT_FILES variable
"""
hdddir = "%s/boot.%d" % (cr_workdir, part.lineno)
if not kernel_dir:
kernel_dir = get_bitbake_var("DEPLOY_DIR_IMAGE")
if not kernel_dir:
raise WicError("Couldn't find DEPLOY_DIR_IMAGE, exiting")
logger.debug('Kernel dir: %s', bootimg_dir)
for task in cls.install_task:
src_path, dst_path = task
logger.debug('Install %s as %s', src_path, dst_path)
install_cmd = "install -m 0644 -D %s %s" \
% (os.path.join(kernel_dir, src_path),
os.path.join(hdddir, dst_path))
exec_cmd(install_cmd)
logger.debug('Prepare boot partition using rootfs in %s', hdddir)
part.prepare_rootfs(cr_workdir, oe_builddir, hdddir, native_sysroot,
False)
def prepare_rootfs_msdos(self, rootfs, oe_builddir, rootfs_dir,
native_sysroot, pseudo):
"""
Prepare content for a msdos/vfat rootfs partition.
"""
du_cmd = "du -bks %s" % rootfs_dir
out = exec_cmd(du_cmd)
blocks = int(out.split()[0])
rootfs_size = self.get_rootfs_size(blocks)
label_str = "-n boot"
if self.label:
label_str = "-n %s" % self.label
size_str = ""
if self.fstype == 'msdos':
size_str = "-F 16" # FAT 16
extraopts = self.mkfs_extraopts or '-S 512'
dosfs_cmd = "mkdosfs %s %s %s -C %s %d" % \
(label_str, size_str, extraopts, rootfs, rootfs_size)
exec_native_cmd(dosfs_cmd, native_sysroot)
mcopy_cmd = "mcopy -i %s -s %s/* ::/" % (rootfs, rootfs_dir)
exec_native_cmd(mcopy_cmd, native_sysroot)
chmod_cmd = "chmod 644 %s" % rootfs
exec_cmd(chmod_cmd)
def dir(self, pnum, path):
if self.partitions[pnum].fstype.startswith('ext'):
return exec_cmd("{} {} -R 'ls -l {}'".format(self.debugfs,
self._get_part_image(pnum),
path), as_shell=True)
else: # fat
return exec_cmd("{} -i {} ::{}".format(self.mdir,
self._get_part_image(pnum),
path))
def dir(self, pnum, path):
if self.partitions[pnum].fstype.startswith('ext'):
return exec_cmd("{} {} -R 'ls -l {}'".format(self.debugfs,
self._get_part_image(pnum),
path), as_shell=True)
else: # fat
return exec_cmd("{} -i {} ::{}".format(self.mdir,
self._get_part_image(pnum),
path))
def do_install_core_image(cls, grubdir, native_sysroot):
"""
Create the core image in the grub directory.
"""
grub_modules = "at_keyboard biosdisk boot chain configfile ext2 fat linux ls part_msdos reboot serial vga"
cmd_mkimage = "grub-mkimage -p %s -d %s/i386-pc -o %s/i386-pc/core.img -O i386-pc %s" % (
"(hd0,msdos1)/grub", grubdir, grubdir, grub_modules)
exec_cmd(cmd_mkimage)
def do_configure_partition(cls, part, source_params, creator, cr_workdir,
oe_builddir, bootimg_dir, kernel_dir,
native_sysroot):
"""
Called before do_prepare_partition(), creates syslinux config
"""
hdddir = "%s/hdd/boot" % cr_workdir
install_cmd = "install -d %s" % hdddir
exec_cmd(install_cmd)
bootloader = creator.ks.bootloader
custom_cfg = None
if bootloader.configfile:
custom_cfg = get_custom_config(bootloader.configfile)
if custom_cfg:
# Use a custom configuration for grub
syslinux_conf = custom_cfg
logger.debug(
"Using custom configuration file %s "
"for syslinux.cfg", bootloader.configfile)
else:
raise WicError("configfile is specified but failed to "
"get it from %s." % bootloader.configfile)
if not custom_cfg:
# Create syslinux configuration using parameters from wks file
splash = os.path.join(cr_workdir, "/hdd/boot/splash.jpg")
if os.path.exists(splash):
splashline = "menu background splash.jpg"
else:
splashline = ""
syslinux_conf = ""
syslinux_conf += "PROMPT 0\n"
syslinux_conf += "TIMEOUT " + str(bootloader.timeout) + "\n"
syslinux_conf += "\n"
syslinux_conf += "ALLOWOPTIONS 1\n"
syslinux_conf += "SERIAL 0 115200\n"
syslinux_conf += "\n"
if splashline:
syslinux_conf += "%s\n" % splashline
syslinux_conf += "DEFAULT boot\n"
syslinux_conf += "LABEL boot\n"
kernel = "/vmlinuz"
syslinux_conf += "KERNEL " + kernel + "\n"
syslinux_conf += "APPEND label=boot root=%s %s\n" % \
(creator.rootdev, bootloader.append)
logger.debug("Writing syslinux config %s/hdd/boot/syslinux.cfg",
cr_workdir)
cfg = open("%s/hdd/boot/syslinux.cfg" % cr_workdir, "w")
cfg.write(syslinux_conf)
cfg.close()
def do_configure_partition(cls, part, source_params, creator, cr_workdir,
oe_builddir, bootimg_dir, kernel_dir,
native_sysroot):
"""
Called before do_prepare_partition(), creates syslinux config
"""
hdddir = "%s/hdd/boot" % cr_workdir
install_cmd = "install -d %s" % hdddir
exec_cmd(install_cmd)
bootloader = creator.ks.bootloader
custom_cfg = None
if bootloader.configfile:
custom_cfg = get_custom_config(bootloader.configfile)
if custom_cfg:
# Use a custom configuration for grub
syslinux_conf = custom_cfg
logger.debug("Using custom configuration file %s "
"for syslinux.cfg", bootloader.configfile)
else:
raise WicError("configfile is specified but failed to "
"get it from %s." % bootloader.configfile)
if not custom_cfg:
# Create syslinux configuration using parameters from wks file
splash = os.path.join(cr_workdir, "/hdd/boot/splash.jpg")
if os.path.exists(splash):
splashline = "menu background splash.jpg"
else:
splashline = ""
syslinux_conf = ""
syslinux_conf += "PROMPT 0\n"
syslinux_conf += "TIMEOUT " + str(bootloader.timeout) + "\n"
syslinux_conf += "\n"
syslinux_conf += "ALLOWOPTIONS 1\n"
syslinux_conf += "SERIAL 0 115200\n"
syslinux_conf += "\n"
if splashline:
syslinux_conf += "%s\n" % splashline
syslinux_conf += "DEFAULT boot\n"
syslinux_conf += "LABEL boot\n"
kernel = "/vmlinuz"
syslinux_conf += "KERNEL " + kernel + "\n"
syslinux_conf += "APPEND label=boot root=%s %s\n" % \
(creator.rootdev, bootloader.append)
logger.debug("Writing syslinux config %s/hdd/boot/syslinux.cfg",
cr_workdir)
cfg = open("%s/hdd/boot/syslinux.cfg" % cr_workdir, "w")
cfg.write(syslinux_conf)
cfg.close()
def do_configure_grubefi(cls, hdddir, creator, cr_workdir, source_params):
"""
Create loader-specific (grub-efi) config
"""
configfile = creator.ks.bootloader.configfile
custom_cfg = None
if configfile:
custom_cfg = get_custom_config(configfile)
if custom_cfg:
# Use a custom configuration for grub
grubefi_conf = custom_cfg
logger.debug(
"Using custom configuration file "
"%s for grub.cfg", configfile)
else:
raise WicError("configfile is specified but failed to "
"get it from %s." % configfile)
initrd = source_params.get('initrd')
if initrd:
bootimg_dir = get_bitbake_var("DEPLOY_DIR_IMAGE")
if not bootimg_dir:
raise WicError("Couldn't find DEPLOY_DIR_IMAGE, exiting")
cp_cmd = "cp %s/%s %s" % (bootimg_dir, initrd, hdddir)
exec_cmd(cp_cmd, True)
else:
logger.debug("Ignoring missing initrd")
if not custom_cfg:
# Create grub configuration using parameters from wks file
bootloader = creator.ks.bootloader
title = source_params.get('title')
grubefi_conf = ""
grubefi_conf += "serial --unit=0 --speed=115200 --word=8 --parity=no --stop=1\n"
grubefi_conf += "default=boot\n"
grubefi_conf += "timeout=%s\n" % bootloader.timeout
grubefi_conf += "menuentry '%s'{\n" % (title if title else "boot")
kernel = "/bzImage"
grubefi_conf += "linux %s root=%s rootwait %s\n" \
% (kernel, creator.rootdev, bootloader.append)
if initrd:
grubefi_conf += "initrd /%s\n" % initrd
grubefi_conf += "}\n"
logger.debug("Writing grubefi config %s/hdd/boot/EFI/BOOT/grub.cfg",
cr_workdir)
cfg = open("%s/hdd/boot/EFI/BOOT/grub.cfg" % cr_workdir, "w")
cfg.write(grubefi_conf)
cfg.close()
def prepare_rootfs(self,
cr_workdir,
oe_builddir,
rootfs_dir,
native_sysroot,
real_rootfs=True,
pseudo_dir=None):
"""
Prepare content for a rootfs partition i.e. create a partition
and fill it from a /rootfs dir.
Currently handles ext2/3/4, btrfs, vfat and squashfs.
"""
p_prefix = os.environ.get("PSEUDO_PREFIX", "%s/usr" % native_sysroot)
if (pseudo_dir):
pseudo = "export PSEUDO_PREFIX=%s;" % p_prefix
pseudo += "export PSEUDO_LOCALSTATEDIR=%s;" % pseudo_dir
pseudo += "export PSEUDO_PASSWD=%s;" % rootfs_dir
pseudo += "export PSEUDO_NOSYMLINKEXP=1;"
pseudo += "%s " % get_bitbake_var("FAKEROOTCMD")
else:
pseudo = None
rootfs = "%s/rootfs_%s.%s.%s" % (cr_workdir, self.label, self.lineno,
self.fstype)
if os.path.isfile(rootfs):
os.remove(rootfs)
if not self.size and real_rootfs:
# The rootfs size is not set in .ks file so try to get it
# from bitbake variable
rsize_bb = get_bitbake_var('ROOTFS_SIZE')
rdir = get_bitbake_var('IMAGE_ROOTFS')
if rsize_bb and rdir == rootfs_dir:
# Bitbake variable ROOTFS_SIZE is calculated in
# Image._get_rootfs_size method from meta/lib/oe/image.py
# using IMAGE_ROOTFS_SIZE, IMAGE_ROOTFS_ALIGNMENT,
# IMAGE_OVERHEAD_FACTOR and IMAGE_ROOTFS_EXTRA_SPACE
self.size = int(round(float(rsize_bb)))
else:
# Bitbake variable ROOTFS_SIZE is not defined so compute it
# from the rootfs_dir size using the same logic found in
# get_rootfs_size() from meta/classes/image.bbclass
du_cmd = "du -ks %s" % rootfs_dir
out = exec_cmd(du_cmd)
self.size = int(out.split()[0])
prefix = "ext" if self.fstype.startswith("ext") else self.fstype
method = getattr(self, "prepare_rootfs_" + prefix)
method(rootfs, oe_builddir, rootfs_dir, native_sysroot, pseudo)
self.source_file = rootfs
# get the rootfs size in the right units for kickstart (kB)
du_cmd = "du -Lbks %s" % rootfs
out = exec_cmd(du_cmd)
self.size = int(out.split()[0])
def do_configure_partition(cls, part, source_params, creator, cr_workdir,
oe_builddir, bootimg_dir, kernel_dir,
native_sysroot):
"""
Called before do_prepare_partition(), creates loader specific config
"""
hdddir = "%s/hdd/boot" % cr_workdir
install_cmd = "install -d %s/grub" % hdddir
exec_cmd(install_cmd)
cls.do_configure_grub_legacy(hdddir, creator, cr_workdir, source_params)
def _build_initramfs_path(rootfs_dir, cr_workdir):
"""
Create path for initramfs image
"""
initrd = get_bitbake_var("INITRD_LIVE") or get_bitbake_var("INITRD")
if not initrd:
initrd_dir = get_bitbake_var("DEPLOY_DIR_IMAGE")
if not initrd_dir:
raise WicError("Couldn't find DEPLOY_DIR_IMAGE, exiting.")
image_name = get_bitbake_var("IMAGE_BASENAME")
if not image_name:
raise WicError("Couldn't find IMAGE_BASENAME, exiting.")
image_type = get_bitbake_var("INITRAMFS_FSTYPES")
if not image_type:
raise WicError("Couldn't find INITRAMFS_FSTYPES, exiting.")
machine = os.path.basename(initrd_dir)
pattern = '%s/%s*%s.%s' % (initrd_dir, image_name, machine,
image_type)
files = glob.glob(pattern)
if files:
initrd = files[0]
if not initrd or not os.path.exists(initrd):
# Create initrd from rootfs directory
initrd = "%s/initrd.cpio.gz" % cr_workdir
initrd_dir = "%s/INITRD" % cr_workdir
shutil.copytree("%s" % rootfs_dir, \
"%s" % initrd_dir, symlinks=True)
if os.path.isfile("%s/init" % rootfs_dir):
shutil.copy2("%s/init" % rootfs_dir, "%s/init" % initrd_dir)
elif os.path.lexists("%s/init" % rootfs_dir):
os.symlink(os.readlink("%s/init" % rootfs_dir), \
"%s/init" % initrd_dir)
elif os.path.isfile("%s/sbin/init" % rootfs_dir):
shutil.copy2("%s/sbin/init" % rootfs_dir, \
"%s" % initrd_dir)
elif os.path.lexists("%s/sbin/init" % rootfs_dir):
os.symlink(os.readlink("%s/sbin/init" % rootfs_dir), \
"%s/init" % initrd_dir)
else:
raise WicError("Couldn't find or build initrd, exiting.")
exec_cmd("cd %s && find . | cpio -o -H newc -R +0:+0 >./initrd.cpio " \
% initrd_dir, as_shell=True)
exec_cmd("gzip -f -9 -c %s/initrd.cpio > %s" \
% (cr_workdir, initrd), as_shell=True)
shutil.rmtree(initrd_dir)
return initrd
def do_configure_partition(cls, part, source_params, cr, cr_workdir,
oe_builddir, bootimg_dir, deploy_dir_image,
native_sysroot):
"""
Called before do_prepare_partition(), create u-boot specific boot config
"""
hdddir = "%s/boot.%d" % (cr_workdir, part.lineno)
install_cmd = "install -d %s" % hdddir
exec_cmd(install_cmd)
if not deploy_dir_image:
deploy_dir_image = get_bitbake_var("DEPLOY_DIR_IMAGE")
if not deploy_dir_image:
raise WicError("Couldn't find DEPLOY_DIR_IMAGE, exiting")
part_files = source_params.get("files")
logger.debug('%s files files: %s', part, part_files)
# list of tuples (src_name, dst_name)
deploy_files = []
for src_entry in re.findall(r'[\w;\-\./\*]+', part_files):
if ';' in src_entry:
dst_entry = tuple(src_entry.split(';'))
if not dst_entry[0] or not dst_entry[1]:
raise WicError('Malformed boot file entry: %s' % src_entry)
else:
dst_entry = (src_entry, src_entry)
logger.debug('Destination entry: %r', dst_entry)
deploy_files.append(dst_entry)
cls.install_task = []
for deploy_entry in deploy_files:
src, dst = deploy_entry
if '*' in src:
# by default install files under their basename
entry_name_fn = os.path.basename
if dst != src:
# unless a target name was given, then treat name
# as a directory and append a basename
entry_name_fn = lambda name: \
os.path.join(dst,
os.path.basename(name))
srcs = glob(os.path.join(deploy_dir_image, src))
logger.debug('Globbed sources: %s', ', '.join(srcs))
for entry in srcs:
src = os.path.relpath(entry, deploy_dir_image)
entry_dst_name = entry_name_fn(entry)
cls.install_task.append((src, entry_dst_name))
else:
cls.install_task.append((src, dst))
def do_configure_grubefi(cls, hdddir, creator, cr_workdir, source_params):
"""
Create loader-specific (grub-efi) config
"""
configfile = creator.ks.bootloader.configfile
custom_cfg = None
if configfile:
custom_cfg = get_custom_config(configfile)
if custom_cfg:
# Use a custom configuration for grub
grubefi_conf = custom_cfg
logger.debug("Using custom configuration file "
"%s for grub.cfg", configfile)
else:
raise WicError("configfile is specified but failed to "
"get it from %s." % configfile)
initrd = source_params.get('initrd')
if initrd:
bootimg_dir = get_bitbake_var("DEPLOY_DIR_IMAGE")
if not bootimg_dir:
raise WicError("Couldn't find DEPLOY_DIR_IMAGE, exiting")
cp_cmd = "cp %s/%s %s" % (bootimg_dir, initrd, hdddir)
exec_cmd(cp_cmd, True)
else:
logger.debug("Ignoring missing initrd")
if not custom_cfg:
# Create grub configuration using parameters from wks file
bootloader = creator.ks.bootloader
grubefi_conf = ""
grubefi_conf += "serial --unit=0 --speed=115200 --word=8 --parity=no --stop=1\n"
grubefi_conf += "default=boot\n"
grubefi_conf += "timeout=%s\n" % bootloader.timeout
grubefi_conf += "menuentry 'boot'{\n"
kernel = "/bzImage"
grubefi_conf += "linux %s root=%s rootwait %s\n" \
% (kernel, creator.rootdev, bootloader.append)
if initrd:
grubefi_conf += "initrd /%s\n" % initrd
grubefi_conf += "}\n"
logger.debug("Writing grubefi config %s/hdd/boot/EFI/BOOT/grub.cfg",
cr_workdir)
cfg = open("%s/hdd/boot/EFI/BOOT/grub.cfg" % cr_workdir, "w")
cfg.write(grubefi_conf)
cfg.close()
def _build_initramfs_path(rootfs_dir, cr_workdir):
"""
Create path for initramfs image
"""
initrd = get_bitbake_var("INITRD_LIVE") or get_bitbake_var("INITRD")
if not initrd:
initrd_dir = get_bitbake_var("DEPLOY_DIR_IMAGE")
if not initrd_dir:
raise WicError("Couldn't find DEPLOY_DIR_IMAGE, exiting.")
image_name = get_bitbake_var("IMAGE_BASENAME")
if not image_name:
raise WicError("Couldn't find IMAGE_BASENAME, exiting.")
image_type = get_bitbake_var("INITRAMFS_FSTYPES")
if not image_type:
raise WicError("Couldn't find INITRAMFS_FSTYPES, exiting.")
machine = os.path.basename(initrd_dir)
pattern = '%s/%s*%s.%s' % (initrd_dir, image_name, machine, image_type)
files = glob.glob(pattern)
if files:
initrd = files[0]
if not initrd or not os.path.exists(initrd):
# Create initrd from rootfs directory
initrd = "%s/initrd.cpio.gz" % cr_workdir
initrd_dir = "%s/INITRD" % cr_workdir
shutil.copytree("%s" % rootfs_dir, \
"%s" % initrd_dir, symlinks=True)
if os.path.isfile("%s/init" % rootfs_dir):
shutil.copy2("%s/init" % rootfs_dir, "%s/init" % initrd_dir)
elif os.path.lexists("%s/init" % rootfs_dir):
os.symlink(os.readlink("%s/init" % rootfs_dir), \
"%s/init" % initrd_dir)
elif os.path.isfile("%s/sbin/init" % rootfs_dir):
shutil.copy2("%s/sbin/init" % rootfs_dir, \
"%s" % initrd_dir)
elif os.path.lexists("%s/sbin/init" % rootfs_dir):
os.symlink(os.readlink("%s/sbin/init" % rootfs_dir), \
"%s/init" % initrd_dir)
else:
raise WicError("Couldn't find or build initrd, exiting.")
exec_cmd("cd %s && find . | cpio -o -H newc -R +0:+0 >./initrd.cpio " \
% initrd_dir, as_shell=True)
exec_cmd("gzip -f -9 -c %s/initrd.cpio > %s" \
% (cr_workdir, initrd), as_shell=True)
shutil.rmtree(initrd_dir)
return initrd
def copy(self, src, pnum, path):
"""Copy partition image into wic image."""
if self.partitions[pnum].fstype.startswith('ext'):
cmd = "printf 'cd {}\nwrite {} {}\n' | {} -w {}".\
format(path, src, os.path.basename(src),
self.debugfs, self._get_part_image(pnum))
else: # fat
cmd = "{} -i {} -snop {} ::{}".format(self.mcopy,
self._get_part_image(pnum),
src, path)
exec_cmd(cmd, as_shell=True)
self._put_part_image(pnum)
def dir(self, pnum, path):
if pnum not in self.partitions:
raise WicError("Partition %s is not in the image" % pnum)
if self.partitions[pnum].fstype.startswith('ext'):
return exec_cmd("{} {} -R 'ls -l {}'".format(
self.debugfs, self._get_part_image(pnum), path),
as_shell=True)
else: # fat
return exec_cmd("{} -i {} ::{}".format(self.mdir,
self._get_part_image(pnum),
path))
def copy(self, src, pnum, path):
"""Copy partition image into wic image."""
if self.partitions[pnum].fstype.startswith('ext'):
cmd = "echo -e 'cd {}\nwrite {} {}' | {} -w {}".\
format(path, src, os.path.basename(src),
self.debugfs, self._get_part_image(pnum))
else: # fat
cmd = "{} -i {} -snop {} ::{}".format(self.mcopy,
self._get_part_image(pnum),
src, path)
exec_cmd(cmd, as_shell=True)
self._put_part_image(pnum)
def do_prepare_partition(cls, part, source_params, creator, cr_workdir,
oe_builddir, bootimg_dir, kernel_dir, rootfs_dir,
native_sysroot):
"""
Called to do the actual content population for a partition i.e. it
'prepares' the partition to be incorporated into the image.
In this case, prepare content for an EFI (grub) boot partition.
"""
if not bootimg_dir:
bootimg_dir = get_bitbake_var("HDDDIR")
if not bootimg_dir:
msger.error("HDDDIR not set, exiting\n")
staging_kernel_dir = kernel_dir
hdddir = "%s/hdd/%s.%s" % (cr_workdir, part.label, part.lineno)
install_cmd = "install -d %s/EFI/BOOT" % hdddir
exec_cmd(install_cmd)
cp_cmd = "cp %s/EFI/BOOT/* %s/EFI/BOOT" % (bootimg_dir, hdddir)
exec_cmd(cp_cmd, True)
# Calculate the number of extra blocks to be sure that the
# resulting partition image is of the wanted size
du_cmd = "du -bks %s" % hdddir
out = exec_cmd(du_cmd)
blocks = int(out.split()[0])
extra_blocks = part.get_extra_block_count(blocks)
if extra_blocks < BOOTDD_EXTRA_SPACE:
extra_blocks = BOOTDD_EXTRA_SPACE
blocks += extra_blocks
msger.debug("Added %d extra blocks to %s to get to %d total blocks" % \
(extra_blocks, part.mountpoint, blocks))
# dosfs image, created by mkdosfs
efiimg = "%s/%s.%s.img" % (cr_workdir, part.label, part.lineno)
dosfs_cmd = "mkdosfs -n %s -C %s %d" % (part.label.upper(), efiimg,
blocks)
exec_native_cmd(dosfs_cmd, native_sysroot)
mcopy_cmd = "mcopy -i %s -s %s/* ::/" % (efiimg, hdddir)
exec_native_cmd(mcopy_cmd, native_sysroot)
chmod_cmd = "chmod 644 %s" % efiimg
exec_cmd(chmod_cmd)
du_cmd = "du -Lbks %s" % efiimg
out = exec_cmd(du_cmd)
efiimg_size = out.split()[0]
part.size = int(efiimg_size)
part.source_file = efiimg
def remove(self, pnum, path):
"""Remove files/dirs from the partition."""
partimg = self._get_part_image(pnum)
cmd = "{} -i {} ::{}".format(self.mdel, partimg, path)
try:
exec_cmd(cmd)
except WicError as err:
if "not found" in str(err) or "non empty" in str(err):
# mdel outputs 'File ... not found' or 'directory .. non empty"
# try to use mdeltree as path could be a directory
cmd = "{} -i {} ::{}".format(self.mdeltree, partimg, path)
exec_cmd(cmd)
else:
raise err
self._put_part_image(pnum)
def do_configure_grub_legacy(cls, hdddir, creator, cr_workdir,
source_params):
"""
Check if custom config exists in deploy dir, if not create config file.
"""
# Create config file
bootloader = creator.ks.bootloader
hdddir = "%s/hdd/boot/grub" % cr_workdir
install_cmd = "install -d %s" % hdddir
exec_cmd(install_cmd)
deploy_dir = get_bitbake_var("DEPLOY_DIR_IMAGE")
grub_cfg_dir = "%s/%s" % (deploy_dir, "grub.cfg")
if os.path.exists(grub_cfg_dir):
shutil.copyfile(grub_cfg_dir, "%s/grub.cfg" % hdddir)
else:
grub_conf = ""
grub_conf += "serial --unit=0 --speed=115200\n"
grub_conf += "terminal --timeout=%s serial\n" % bootloader.timeout
grub_conf += "default=boot\n"
grub_conf += "menuentry 'boot' {\n"
kernel = "/bzImage"
rootdev = "/dev/sda2"
serial = "console=ttyS0,115200 earlyprintk=serial,ttyS0,115200"
grub_conf += "linux %s root=%s %s\n" \
% (kernel, rootdev, serial)
initrd = source_params.get('initrd')
if initrd:
grub_conf += "initrd /%s\n" % initrd
grub_conf += "}\n"
logger.debug("Writing grub config %s/hdd/boot/grub/grub.cfg",
cr_workdir)
cfg = open("%s/hdd/boot/grub/grub.cfg" % cr_workdir, "w")
cfg.write(grub_conf)
cfg.close()
# Check if custom grubenv file exists
grubenv_dir = "%s/%s" % (deploy_dir, "grubenv")
if os.path.exists(grubenv_dir):
shutil.copyfile(grubenv_dir, "%s/grubenv" % hdddir)
def do_image_label(fstype, dst, label):
if fstype.startswith('ext'):
cmd = 'tune2fs -L %s %s' % (label, dst)
elif fstype in ('msdos', 'vfat'):
cmd = 'dosfslabel %s %s' % (dst, label)
elif fstype == 'btrfs':
cmd = 'btrfs filesystem label %s %s' % (dst, label)
elif fstype == 'swap':
cmd = 'mkswap -L %s %s' % (label, dst)
elif fstype == 'squashfs':
raise WicError("It's not possible to update a squashfs "
"filesystem label '%s'" % (label))
else:
raise WicError("Cannot update filesystem label: "
"Unknown fstype: '%s'" % (fstype))
exec_cmd(cmd)
def remove(self, pnum, path):
"""Remove files/dirs from the partition."""
partimg = self._get_part_image(pnum)
cmd = "{} -i {} ::{}".format(self.mdel, partimg, path)
try:
exec_cmd(cmd)
except WicError as err:
if "not found" in str(err) or "non empty" in str(err):
# mdel outputs 'File ... not found' or 'directory .. non empty"
# try to use mdeltree as path could be a directory
cmd = "{} -i {} ::{}".format(self.mdeltree,
partimg, path)
exec_cmd(cmd)
else:
raise err
self._put_part_image(pnum)
def prepare_rootfs_ext(self, rootfs, cr_workdir, oe_builddir, rootfs_dir,
native_sysroot, pseudo):
"""
Prepare content for an ext2/3/4 rootfs partition.
"""
du_cmd = "du -ks %s" % rootfs_dir
out = exec_cmd(du_cmd)
actual_rootfs_size = int(out.split()[0])
rootfs_size = self.get_rootfs_size(actual_rootfs_size)
with open(rootfs, 'w') as sparse:
os.ftruncate(sparse.fileno(), rootfs_size * 1024)
extraopts = self.mkfs_extraopts or "-F -i 8192"
label_str = ""
if self.label:
label_str = "-L %s" % self.label
mkfs_cmd = "mkfs.%s %s %s %s -U %s -d %s" % \
(self.fstype, extraopts, rootfs, label_str, self.fsuuid, rootfs_dir)
exec_native_cmd(mkfs_cmd, native_sysroot, pseudo=pseudo)
if self.updated_fstab_path and self.has_fstab:
debugfs_script_path = os.path.join(cr_workdir, "debugfs_script")
with open(debugfs_script_path, "w") as f:
f.write("cd etc\n")
f.write("rm fstab\n")
f.write("write %s fstab\n" % (self.updated_fstab_path))
debugfs_cmd = "debugfs -w -f %s %s" % (debugfs_script_path, rootfs)
exec_native_cmd(debugfs_cmd, native_sysroot)
mkfs_cmd = "fsck.%s -pvfD %s" % (self.fstype, rootfs)
exec_native_cmd(mkfs_cmd, native_sysroot, pseudo=pseudo)
def do_prepare_partition(cls, part, source_params, cr, cr_workdir,
oe_builddir, bootimg_dir, kernel_dir, rootfs_dir,
native_sysroot):
"""
Called to do the actual content population for a partition i.e. it
'prepares' the partition to be incorporated into the image.
"""
if not kernel_dir:
kernel_dir = get_bitbake_var("DEPLOY_DIR_IMAGE")
if not kernel_dir:
raise WicError("Couldn't find DEPLOY_DIR_IMAGE, exiting")
logger.debug('Kernel dir: %s', kernel_dir)
if 'file' not in source_params:
raise WicError("No file specified")
src = os.path.join(kernel_dir, source_params['file'])
dst = os.path.join(cr_workdir,
"%s.%s" % (source_params['file'], part.lineno))
if 'skip' in source_params:
sparse_copy(src, dst, skip=int(source_params['skip']))
else:
sparse_copy(src, dst)
# get the size in the right units for kickstart (kB)
du_cmd = "du -Lbks %s" % dst
out = exec_cmd(du_cmd)
filesize = int(out.split()[0])
if filesize > part.size:
part.size = filesize
part.source_file = dst
def do_prepare_partition(cls, part, source_params, cr, cr_workdir,
oe_builddir, bootimg_dir, kernel_dir,
rootfs_dir, native_sysroot):
"""
Called to do the actual content population for a partition i.e. it
'prepares' the partition to be incorporated into the image.
"""
if not kernel_dir:
kernel_dir = get_bitbake_var("DEPLOY_DIR_IMAGE")
if not kernel_dir:
raise WicError("Couldn't find DEPLOY_DIR_IMAGE, exiting")
logger.debug('Kernel dir: %s', kernel_dir)
if 'file' not in source_params:
raise WicError("No file specified")
src = os.path.join(kernel_dir, source_params['file'])
dst = os.path.join(cr_workdir, "%s.%s" % (source_params['file'], part.lineno))
if 'skip' in source_params:
sparse_copy(src, dst, skip=int(source_params['skip']))
else:
sparse_copy(src, dst)
# get the size in the right units for kickstart (kB)
du_cmd = "du -Lbks %s" % dst
out = exec_cmd(du_cmd)
filesize = int(out.split()[0])
if filesize > part.size:
part.size = filesize
part.source_file = dst
def prepare_rootfs_ext(self, rootfs, oe_builddir, rootfs_dir,
native_sysroot, pseudo):
"""
Prepare content for an ext2/3/4 rootfs partition.
"""
du_cmd = "du -ks %s" % rootfs_dir
out = exec_cmd(du_cmd)
actual_rootfs_size = int(out.split()[0])
rootfs_size = self.get_rootfs_size(actual_rootfs_size)
with open(rootfs, 'w') as sparse:
os.ftruncate(sparse.fileno(), rootfs_size * 1024)
extraopts = self.mkfs_extraopts or "-F -i 8192"
label_str = ""
if self.label:
label_str = "-L %s" % self.label
mkfs_cmd = "mkfs.%s %s %s %s -d %s" % \
(self.fstype, extraopts, rootfs, label_str, rootfs_dir)
exec_native_cmd(mkfs_cmd, native_sysroot, pseudo=pseudo)
mkfs_cmd = "fsck.%s -pvfD %s" % (self.fstype, rootfs)
exec_native_cmd(mkfs_cmd, native_sysroot, pseudo=pseudo)
def prepare_rootfs_ext(self, rootfs, oe_builddir, rootfs_dir,
native_sysroot, pseudo):
"""
Prepare content for an ext2/3/4 rootfs partition.
"""
du_cmd = "du -ks %s" % rootfs_dir
out = exec_cmd(du_cmd)
actual_rootfs_size = int(out.split()[0])
rootfs_size = self.get_rootfs_size(actual_rootfs_size)
with open(rootfs, 'w') as sparse:
os.ftruncate(sparse.fileno(), rootfs_size * 1024)
extraopts = self.mkfs_extraopts or "-F -i 8192"
label_str = ""
if self.label:
label_str = "-L %s" % self.label
mkfs_cmd = "mkfs.%s %s %s %s -d %s" % \
(self.fstype, extraopts, rootfs, label_str, rootfs_dir)
exec_native_cmd(mkfs_cmd, native_sysroot, pseudo=pseudo)
mkfs_cmd = "fsck.%s -pvfD %s" % (self.fstype, rootfs)
exec_native_cmd(mkfs_cmd, native_sysroot, pseudo=pseudo)
def do_image_label(fstype, dst, label):
if fstype.startswith('ext'):
cmd = 'tune2fs -L %s %s' % (label, dst)
elif fstype in ('msdos', 'vfat'):
cmd = 'dosfslabel %s %s' % (dst, label)
elif fstype == 'btrfs':
cmd = 'btrfs filesystem label %s %s' % (dst, label)
elif fstype == 'swap':
cmd = 'mkswap -L %s %s' % (label, dst)
elif fstype == 'squashfs':
raise WicError("It's not possible to update a squashfs "
"filesystem label '%s'" % (label))
else:
raise WicError("Cannot update filesystem label: "
"Unknown fstype: '%s'" % (fstype))
exec_cmd(cmd)
def do_configure_partition(cls, part, source_params, creator, cr_workdir,
oe_builddir, bootimg_dir, kernel_dir,
native_sysroot):
"""
Called before do_prepare_partition(), creates loader-specific config
"""
isodir = "%s/ISO/" % cr_workdir
if os.path.exists(isodir):
shutil.rmtree(isodir)
install_cmd = "install -d %s " % isodir
exec_cmd(install_cmd)
# Overwrite the name of the created image
logger.debug(source_params)
if 'image_name' in source_params and \
source_params['image_name'].strip():
creator.name = source_params['image_name'].strip()
logger.debug("The name of the image is: %s", creator.name)
def do_configure_partition(cls, part, source_params, creator, cr_workdir,
oe_builddir, bootimg_dir, kernel_dir,
native_sysroot):
"""
Called before do_prepare_partition(), creates loader-specific config
"""
hdddir = "%s/hdd/boot" % cr_workdir
install_cmd = "install -d %s/EFI/BOOT" % hdddir
exec_cmd(install_cmd)
try:
if source_params['loader'] == 'grub-efi':
cls.do_configure_grubefi(creator, cr_workdir)
elif source_params['loader'] == 'systemd-boot':
cls.do_configure_systemdboot(hdddir, creator, cr_workdir, source_params)
else:
raise WicError("unrecognized bootimg-efi loader: %s" % source_params['loader'])
except KeyError:
raise WicError("bootimg-efi requires a loader, none specified")
def partitions(self):
if self._partitions is None:
self._partitions = OrderedDict()
out = exec_cmd("%s -sm %s unit B print" % (self.parted, self.imagepath))
parttype = namedtuple("Part", "pnum start end size fstype")
for line in out.splitlines()[2:]:
pnum, start, end, size, fstype = line.split(':')[:5]
partition = parttype(pnum, int(start[:-1]), int(end[:-1]),
int(size[:-1]), fstype)
self._partitions[pnum] = partition
return self._partitions
def remove(self, pnum, path):
"""Remove files/dirs from the partition."""
partimg = self._get_part_image(pnum)
if self.partitions[pnum].fstype.startswith('ext'):
cmd = "{} {} -wR 'rm {}'".format(self.debugfs,
self._get_part_image(pnum),
path)
out = exec_cmd(cmd , as_shell=True)
for line in out.splitlines():
if line.startswith("rm:"):
if "file is a directory" in line:
# Try rmdir to see if this is an empty directory. This won't delete
# any non empty directory so let user know about any error that this might
# generate.
print(exec_cmd("{} {} -wR 'rmdir {}'".format(self.debugfs,
self._get_part_image(pnum),
path), as_shell=True))
else:
raise WicError("Could not complete operation: wic %s" % str(line))
else: # fat
cmd = "{} -i {} ::{}".format(self.mdel, partimg, path)
try:
exec_cmd(cmd)
except WicError as err:
if "not found" in str(err) or "non empty" in str(err):
# mdel outputs 'File ... not found' or 'directory .. non empty"
# try to use mdeltree as path could be a directory
cmd = "{} -i {} ::{}".format(self.mdeltree,
partimg, path)
exec_cmd(cmd)
else:
raise err
self._put_part_image(pnum)
def get_partitions(self):
if self._partitions is None:
self._partitions = OrderedDict()
out = exec_cmd("%s -sm %s unit B print" % (self.parted, self.imagepath))
parttype = namedtuple("Part", "pnum start end size fstype")
splitted = out.splitlines()
lsector_size, psector_size, self._ptable_format = splitted[1].split(":")[3:6]
self._lsector_size = int(lsector_size)
self._psector_size = int(psector_size)
for line in splitted[2:]:
pnum, start, end, size, fstype = line.split(':')[:5]
partition = parttype(int(pnum), int(start[:-1]), int(end[:-1]),
int(size[:-1]), fstype)
self._partitions[pnum] = partition
return self._partitions
def prepare_rootfs(self, cr_workdir, oe_builddir, rootfs_dir,
native_sysroot):
"""
Prepare content for a rootfs partition i.e. create a partition
and fill it from a /rootfs dir.
Currently handles ext2/3/4, btrfs and vfat.
"""
p_prefix = os.environ.get("PSEUDO_PREFIX", "%s/usr" % native_sysroot)
p_localstatedir = os.environ.get("PSEUDO_LOCALSTATEDIR",
"%s/../pseudo" % get_bitbake_var("IMAGE_ROOTFS"))
p_passwd = os.environ.get("PSEUDO_PASSWD", rootfs_dir)
p_nosymlinkexp = os.environ.get("PSEUDO_NOSYMLINKEXP", "1")
pseudo = "export PSEUDO_PREFIX=%s;" % p_prefix
pseudo += "export PSEUDO_LOCALSTATEDIR=%s;" % p_localstatedir
pseudo += "export PSEUDO_PASSWD=%s;" % p_passwd
pseudo += "export PSEUDO_NOSYMLINKEXP=%s;" % p_nosymlinkexp
pseudo += "%s " % get_bitbake_var("FAKEROOTCMD")
rootfs = "%s/rootfs_%s.%s.%s" % (cr_workdir, self.label,
self.lineno, self.fstype)
if os.path.isfile(rootfs):
os.remove(rootfs)
# Get rootfs size from bitbake variable if it's not set in .ks file
if not self.size:
# Bitbake variable ROOTFS_SIZE is calculated in
# Image._get_rootfs_size method from meta/lib/oe/image.py
# using IMAGE_ROOTFS_SIZE, IMAGE_ROOTFS_ALIGNMENT,
# IMAGE_OVERHEAD_FACTOR and IMAGE_ROOTFS_EXTRA_SPACE
rsize_bb = get_bitbake_var('ROOTFS_SIZE')
if rsize_bb:
logger.warning('overhead-factor was specified, but size was not,'
' so bitbake variables will be used for the size.'
' In this case both IMAGE_OVERHEAD_FACTOR and '
'--overhead-factor will be applied')
self.size = int(round(float(rsize_bb)))
prefix = "ext" if self.fstype.startswith("ext") else self.fstype
method = getattr(self, "prepare_rootfs_" + prefix)
method(rootfs, oe_builddir, rootfs_dir, native_sysroot, pseudo)
self.source_file = rootfs
# get the rootfs size in the right units for kickstart (kB)
du_cmd = "du -Lbks %s" % rootfs
out = exec_cmd(du_cmd)
self.size = int(out.split()[0])
def get_partitions(self):
if self._partitions is None:
self._partitions = OrderedDict()
out = exec_cmd("%s -sm %s unit B print" % (self.parted, self.imagepath))
parttype = namedtuple("Part", "pnum start end size fstype")
splitted = out.splitlines()
# skip over possible errors in exec_cmd output
try:
idx =splitted.index("BYT;")
except ValueError:
raise WicError("Error getting partition information from %s" % (self.parted))
lsector_size, psector_size, self._ptable_format = splitted[idx + 1].split(":")[3:6]
self._lsector_size = int(lsector_size)
self._psector_size = int(psector_size)
for line in splitted[idx + 2:]:
pnum, start, end, size, fstype = line.split(':')[:5]
partition = parttype(int(pnum), int(start[:-1]), int(end[:-1]),
int(size[:-1]), fstype)
self._partitions[pnum] = partition
return self._partitions
def prepare_rootfs_btrfs(self, rootfs, oe_builddir, rootfs_dir,
native_sysroot, pseudo):
"""
Prepare content for a btrfs rootfs partition.
"""
du_cmd = "du -ks %s" % rootfs_dir
out = exec_cmd(du_cmd)
actual_rootfs_size = int(out.split()[0])
rootfs_size = self.get_rootfs_size(actual_rootfs_size)
with open(rootfs, 'w') as sparse:
os.ftruncate(sparse.fileno(), rootfs_size * 1024)
label_str = ""
if self.label:
label_str = "-L %s" % self.label
mkfs_cmd = "mkfs.%s -b %d -r %s %s %s -U %s %s" % \
(self.fstype, rootfs_size * 1024, rootfs_dir, label_str,
self.mkfs_extraopts, self.fsuuid, rootfs)
exec_native_cmd(mkfs_cmd, native_sysroot, pseudo=pseudo)
def remove(self, pnum, path):
"""Remove files/dirs from the partition."""
partimg = self._get_part_image(pnum)
if self.partitions[pnum].fstype.startswith('ext'):
exec_cmd("{} {} -wR 'rm {}'".format(self.debugfs,
self._get_part_image(pnum),
path), as_shell=True)
else: # fat
cmd = "{} -i {} ::{}".format(self.mdel, partimg, path)
try:
exec_cmd(cmd)
except WicError as err:
if "not found" in str(err) or "non empty" in str(err):
# mdel outputs 'File ... not found' or 'directory .. non empty"
# try to use mdeltree as path could be a directory
cmd = "{} -i {} ::{}".format(self.mdeltree,
partimg, path)
exec_cmd(cmd)
else:
raise err
self._put_part_image(pnum)
def do_configure_systemdboot(cls, hdddir, creator, cr_workdir, source_params):
"""
Create loader-specific systemd-boot/gummiboot config
"""
install_cmd = "install -d %s/loader" % hdddir
exec_cmd(install_cmd)
install_cmd = "install -d %s/loader/entries" % hdddir
exec_cmd(install_cmd)
bootloader = creator.ks.bootloader
loader_conf = ""
loader_conf += "default boot\n"
loader_conf += "timeout %d\n" % bootloader.timeout
initrd = source_params.get('initrd')
if initrd:
# obviously we need to have a common common deploy var
bootimg_dir = get_bitbake_var("DEPLOY_DIR_IMAGE")
if not bootimg_dir:
raise WicError("Couldn't find DEPLOY_DIR_IMAGE, exiting")
cp_cmd = "cp %s/%s %s" % (bootimg_dir, initrd, hdddir)
exec_cmd(cp_cmd, True)
else:
logger.debug("Ignoring missing initrd")
logger.debug("Writing systemd-boot config "
"%s/hdd/boot/loader/loader.conf", cr_workdir)
cfg = open("%s/hdd/boot/loader/loader.conf" % cr_workdir, "w")
cfg.write(loader_conf)
cfg.close()
configfile = creator.ks.bootloader.configfile
custom_cfg = None
if configfile:
custom_cfg = get_custom_config(configfile)
if custom_cfg:
# Use a custom configuration for systemd-boot
boot_conf = custom_cfg
logger.debug("Using custom configuration file "
"%s for systemd-boots's boot.conf", configfile)
else:
raise WicError("configfile is specified but failed to "
"get it from %s.", configfile)
if not custom_cfg:
# Create systemd-boot configuration using parameters from wks file
kernel = "/bzImage"
boot_conf = ""
boot_conf += "title boot\n"
boot_conf += "linux %s\n" % kernel
boot_conf += "options LABEL=Boot root=%s %s\n" % \
(creator.rootdev, bootloader.append)
if initrd:
boot_conf += "initrd /%s\n" % initrd
logger.debug("Writing systemd-boot config "
"%s/hdd/boot/loader/entries/boot.conf", cr_workdir)
cfg = open("%s/hdd/boot/loader/entries/boot.conf" % cr_workdir, "w")
cfg.write(boot_conf)
cfg.close()
def do_prepare_partition(cls, part, source_params, creator, cr_workdir,
oe_builddir, bootimg_dir, kernel_dir,
rootfs_dir, native_sysroot):
"""
Called to do the actual content population for a partition i.e. it
'prepares' the partition to be incorporated into the image.
In this case, prepare content for legacy bios boot partition.
"""
bootimg_dir = cls._get_bootimg_dir(bootimg_dir, 'syslinux')
staging_kernel_dir = kernel_dir
hdddir = "%s/hdd/boot" % cr_workdir
cmds = ("install -m 0644 %s/bzImage %s/vmlinuz" %
(staging_kernel_dir, hdddir),
"install -m 444 %s/syslinux/ldlinux.sys %s/ldlinux.sys" %
(bootimg_dir, hdddir),
"install -m 0644 %s/syslinux/vesamenu.c32 %s/vesamenu.c32" %
(bootimg_dir, hdddir),
"install -m 444 %s/syslinux/libcom32.c32 %s/libcom32.c32" %
(bootimg_dir, hdddir),
"install -m 444 %s/syslinux/libutil.c32 %s/libutil.c32" %
(bootimg_dir, hdddir))
for install_cmd in cmds:
exec_cmd(install_cmd)
du_cmd = "du -bks %s" % hdddir
out = exec_cmd(du_cmd)
blocks = int(out.split()[0])
extra_blocks = part.get_extra_block_count(blocks)
if extra_blocks < BOOTDD_EXTRA_SPACE:
extra_blocks = BOOTDD_EXTRA_SPACE
blocks += extra_blocks
logger.debug("Added %d extra blocks to %s to get to %d total blocks",
extra_blocks, part.mountpoint, blocks)
# dosfs image, created by mkdosfs
bootimg = "%s/boot%s.img" % (cr_workdir, part.lineno)
dosfs_cmd = "mkdosfs -n boot -i %s -S 512 -C %s %d" % \
(part.fsuuid, bootimg, blocks)
exec_native_cmd(dosfs_cmd, native_sysroot)
mcopy_cmd = "mcopy -i %s -s %s/* ::/" % (bootimg, hdddir)
exec_native_cmd(mcopy_cmd, native_sysroot)
syslinux_cmd = "syslinux %s" % bootimg
exec_native_cmd(syslinux_cmd, native_sysroot)
chmod_cmd = "chmod 644 %s" % bootimg
exec_cmd(chmod_cmd)
du_cmd = "du -Lbks %s" % bootimg
out = exec_cmd(du_cmd)
bootimg_size = out.split()[0]
part.size = int(bootimg_size)
part.source_file = bootimg
def write_ptable(parts, target):
with tempfile.NamedTemporaryFile(prefix="wic-sfdisk-", mode='w') as outf:
write_sfdisk_script(outf, parts)
cmd = "{} --no-reread {} < {} ".format(self.sfdisk, target, outf.name)
exec_cmd(cmd, as_shell=True)
def do_configure_partition(cls, part, source_params, cr, cr_workdir,
oe_builddir, bootimg_dir, kernel_dir,
native_sysroot):
"""
Called before do_prepare_partition(), create u-boot specific boot config
"""
hdddir = "%s/boot.%d" % (cr_workdir, part.lineno)
install_cmd = "install -d %s" % hdddir
exec_cmd(install_cmd)
if not kernel_dir:
kernel_dir = get_bitbake_var("DEPLOY_DIR_IMAGE")
if not kernel_dir:
raise WicError("Couldn't find DEPLOY_DIR_IMAGE, exiting")
boot_files = None
for (fmt, id) in (("_uuid-%s", part.uuid), ("_label-%s", part.label), (None, None)):
if fmt:
var = fmt % id
else:
var = ""
boot_files = get_bitbake_var("IMAGE_BOOT_FILES" + var)
if boot_files is not None:
break
if boot_files is None:
raise WicError('No boot files defined, IMAGE_BOOT_FILES unset for entry #%d' % part.lineno)
logger.debug('Boot files: %s', boot_files)
# list of tuples (src_name, dst_name)
deploy_files = []
for src_entry in re.findall(r'[\w;\-\./\*]+', boot_files):
if ';' in src_entry:
dst_entry = tuple(src_entry.split(';'))
if not dst_entry[0] or not dst_entry[1]:
raise WicError('Malformed boot file entry: %s' % src_entry)
else:
dst_entry = (src_entry, src_entry)
logger.debug('Destination entry: %r', dst_entry)
deploy_files.append(dst_entry)
cls.install_task = [];
for deploy_entry in deploy_files:
src, dst = deploy_entry
if '*' in src:
# by default install files under their basename
entry_name_fn = os.path.basename
if dst != src:
# unless a target name was given, then treat name
# as a directory and append a basename
entry_name_fn = lambda name: \
os.path.join(dst,
os.path.basename(name))
srcs = glob(os.path.join(kernel_dir, src))
logger.debug('Globbed sources: %s', ', '.join(srcs))
for entry in srcs:
src = os.path.relpath(entry, kernel_dir)
entry_dst_name = entry_name_fn(entry)
cls.install_task.append((src, entry_dst_name))
else:
cls.install_task.append((src, dst))
if source_params.get('loader') != "u-boot":
return
configfile = cr.ks.bootloader.configfile
custom_cfg = None
if configfile:
custom_cfg = get_custom_config(configfile)
if custom_cfg:
# Use a custom configuration for extlinux.conf
extlinux_conf = custom_cfg
logger.debug("Using custom configuration file "
"%s for extlinux.cfg", configfile)
else:
raise WicError("configfile is specified but failed to "
"get it from %s." % configfile)
if not custom_cfg:
# The kernel types supported by the sysboot of u-boot
kernel_types = ["zImage", "Image", "fitImage", "uImage", "vmlinux"]
has_dtb = False
fdt_dir = '/'
kernel_name = None
# Find the kernel image name, from the highest precedence to lowest
for image in kernel_types:
for task in cls.install_task:
src, dst = task
if re.match(image, src):
kernel_name = os.path.join('/', dst)
break
if kernel_name:
break
for task in cls.install_task:
src, dst = task
# We suppose that all the dtb are in the same directory
if re.search(r'\.dtb', src) and fdt_dir == '/':
has_dtb = True
fdt_dir = os.path.join(fdt_dir, os.path.dirname(dst))
break
if not kernel_name:
raise WicError('No kernel file founded')
# Compose the extlinux.conf
extlinux_conf = "default Yocto\n"
extlinux_conf += "label Yocto\n"
extlinux_conf += " kernel %s\n" % kernel_name
if has_dtb:
extlinux_conf += " fdtdir %s\n" % fdt_dir
bootloader = cr.ks.bootloader
extlinux_conf += "append root=%s rootwait %s\n" \
% (cr.rootdev, bootloader.append if bootloader.append else '')
install_cmd = "install -d %s/extlinux/" % hdddir
exec_cmd(install_cmd)
cfg = open("%s/extlinux/extlinux.conf" % hdddir, "w")
cfg.write(extlinux_conf)
cfg.close()
def do_prepare_partition(cls, part, source_params, creator, cr_workdir,
oe_builddir, bootimg_dir, kernel_dir,
rootfs_dir, native_sysroot):
"""
Called to do the actual content population for a partition i.e. it
'prepares' the partition to be incorporated into the image.
In this case, prepare content for an EFI (grub) boot partition.
"""
if not kernel_dir:
kernel_dir = get_bitbake_var("DEPLOY_DIR_IMAGE")
if not kernel_dir:
raise WicError("Couldn't find DEPLOY_DIR_IMAGE, exiting")
staging_kernel_dir = kernel_dir
hdddir = "%s/hdd/boot" % cr_workdir
install_cmd = "install -m 0644 %s/bzImage %s/bzImage" % \
(staging_kernel_dir, hdddir)
exec_cmd(install_cmd)
try:
if source_params['loader'] == 'grub-efi':
shutil.copyfile("%s/hdd/boot/EFI/BOOT/grub.cfg" % cr_workdir,
"%s/grub.cfg" % cr_workdir)
for mod in [x for x in os.listdir(kernel_dir) if x.startswith("grub-efi-")]:
cp_cmd = "cp %s/%s %s/EFI/BOOT/%s" % (kernel_dir, mod, hdddir, mod[9:])
exec_cmd(cp_cmd, True)
shutil.move("%s/grub.cfg" % cr_workdir,
"%s/hdd/boot/EFI/BOOT/grub.cfg" % cr_workdir)
elif source_params['loader'] == 'systemd-boot':
for mod in [x for x in os.listdir(kernel_dir) if x.startswith("systemd-")]:
cp_cmd = "cp %s/%s %s/EFI/BOOT/%s" % (kernel_dir, mod, hdddir, mod[8:])
exec_cmd(cp_cmd, True)
else:
raise WicError("unrecognized bootimg-efi loader: %s" %
source_params['loader'])
except KeyError:
raise WicError("bootimg-efi requires a loader, none specified")
startup = os.path.join(kernel_dir, "startup.nsh")
if os.path.exists(startup):
cp_cmd = "cp %s %s/" % (startup, hdddir)
exec_cmd(cp_cmd, True)
du_cmd = "du -bks %s" % hdddir
out = exec_cmd(du_cmd)
blocks = int(out.split()[0])
extra_blocks = part.get_extra_block_count(blocks)
if extra_blocks < BOOTDD_EXTRA_SPACE:
extra_blocks = BOOTDD_EXTRA_SPACE
blocks += extra_blocks
logger.debug("Added %d extra blocks to %s to get to %d total blocks",
extra_blocks, part.mountpoint, blocks)
# dosfs image, created by mkdosfs
bootimg = "%s/boot.img" % cr_workdir
dosfs_cmd = "mkdosfs -n efi -i %s -C %s %d" % \
(part.fsuuid, bootimg, blocks)
exec_native_cmd(dosfs_cmd, native_sysroot)
mcopy_cmd = "mcopy -i %s -s %s/* ::/" % (bootimg, hdddir)
exec_native_cmd(mcopy_cmd, native_sysroot)
chmod_cmd = "chmod 644 %s" % bootimg
exec_cmd(chmod_cmd)
du_cmd = "du -Lbks %s" % bootimg
out = exec_cmd(du_cmd)
bootimg_size = out.split()[0]
part.size = int(bootimg_size)
part.source_file = bootimg
def do_prepare_partition(cls, part, source_params, creator, cr_workdir,
oe_builddir, bootimg_dir, kernel_dir,
rootfs_dir, native_sysroot):
"""
Called to do the actual content population for a partition i.e. it
'prepares' the partition to be incorporated into the image.
In this case, prepare content for a bootable ISO image.
"""
isodir = "%s/ISO" % cr_workdir
if part.rootfs_dir is None:
if not 'ROOTFS_DIR' in rootfs_dir:
raise WicError("Couldn't find --rootfs-dir, exiting.")
rootfs_dir = rootfs_dir['ROOTFS_DIR']
else:
if part.rootfs_dir in rootfs_dir:
rootfs_dir = rootfs_dir[part.rootfs_dir]
elif part.rootfs_dir:
rootfs_dir = part.rootfs_dir
else:
raise WicError("Couldn't find --rootfs-dir=%s connection "
"or it is not a valid path, exiting." %
part.rootfs_dir)
if not os.path.isdir(rootfs_dir):
rootfs_dir = get_bitbake_var("IMAGE_ROOTFS")
if not os.path.isdir(rootfs_dir):
raise WicError("Couldn't find IMAGE_ROOTFS, exiting.")
part.rootfs_dir = rootfs_dir
# Prepare rootfs.img
deploy_dir = get_bitbake_var("DEPLOY_DIR_IMAGE")
img_iso_dir = get_bitbake_var("ISODIR")
rootfs_img = "%s/rootfs.img" % img_iso_dir
if not os.path.isfile(rootfs_img):
# check if rootfs.img is in deploydir
deploy_dir = get_bitbake_var("DEPLOY_DIR_IMAGE")
image_name = get_bitbake_var("IMAGE_LINK_NAME")
rootfs_img = "%s/%s.%s" \
% (deploy_dir, image_name, part.fstype)
if not os.path.isfile(rootfs_img):
# create image file with type specified by --fstype
# which contains rootfs
du_cmd = "du -bks %s" % rootfs_dir
out = exec_cmd(du_cmd)
part.size = int(out.split()[0])
part.extra_space = 0
part.overhead_factor = 1.2
part.prepare_rootfs(cr_workdir, oe_builddir, rootfs_dir, \
native_sysroot)
rootfs_img = part.source_file
install_cmd = "install -m 0644 %s %s/rootfs.img" \
% (rootfs_img, isodir)
exec_cmd(install_cmd)
# Remove the temporary file created by part.prepare_rootfs()
if os.path.isfile(part.source_file):
os.remove(part.source_file)
# Support using a different initrd other than default
if source_params.get('initrd'):
initrd = source_params['initrd']
if not deploy_dir:
raise WicError("Couldn't find DEPLOY_DIR_IMAGE, exiting")
cp_cmd = "cp %s/%s %s" % (deploy_dir, initrd, cr_workdir)
exec_cmd(cp_cmd)
else:
# Prepare initial ramdisk
initrd = "%s/initrd" % deploy_dir
if not os.path.isfile(initrd):
initrd = "%s/initrd" % img_iso_dir
if not os.path.isfile(initrd):
initrd = cls._build_initramfs_path(rootfs_dir, cr_workdir)
install_cmd = "install -m 0644 %s %s/initrd" % (initrd, isodir)
exec_cmd(install_cmd)
# Remove the temporary file created by _build_initramfs_path function
if os.path.isfile("%s/initrd.cpio.gz" % cr_workdir):
os.remove("%s/initrd.cpio.gz" % cr_workdir)
# Install bzImage
install_cmd = "install -m 0644 %s/bzImage %s/bzImage" % \
(kernel_dir, isodir)
exec_cmd(install_cmd)
#Create bootloader for efi boot
try:
target_dir = "%s/EFI/BOOT" % isodir
if os.path.exists(target_dir):
shutil.rmtree(target_dir)
os.makedirs(target_dir)
if source_params['loader'] == 'grub-efi':
# Builds bootx64.efi/bootia32.efi if ISODIR didn't exist or
# didn't contains it
target_arch = get_bitbake_var("TARGET_SYS")
if not target_arch:
raise WicError("Coludn't find target architecture")
if re.match("x86_64", target_arch):
grub_image = "grub-efi-bootx64.efi"
elif re.match('i.86', target_arch):
grub_image = "grub-efi-bootia32.efi"
else:
raise WicError("grub-efi is incompatible with target %s" %
target_arch)
grub_target = os.path.join(target_dir, grub_image)
if not os.path.isfile(grub_target):
grub_src = os.path.join(deploy_dir, grub_image)
if not os.path.exists(grub_src):
raise WicError("Grub loader %s is not found in %s. "
"Please build grub-efi first" % (grub_image, deploy_dir))
shutil.copy(grub_src, grub_target)
if not os.path.isfile(os.path.join(target_dir, "boot.cfg")):
cls.do_configure_grubefi(part, creator, target_dir)
else:
raise WicError("unrecognized bootimg-efi loader: %s" %
source_params['loader'])
except KeyError:
raise WicError("bootimg-efi requires a loader, none specified")
# Create efi.img that contains bootloader files for EFI booting
# if ISODIR didn't exist or didn't contains it
if os.path.isfile("%s/efi.img" % img_iso_dir):
install_cmd = "install -m 0644 %s/efi.img %s/efi.img" % \
(img_iso_dir, isodir)
exec_cmd(install_cmd)
else:
du_cmd = "du -bks %s/EFI" % isodir
out = exec_cmd(du_cmd)
blocks = int(out.split()[0])
# Add some extra space for file system overhead
blocks += 100
logger.debug("Added 100 extra blocks to %s to get to %d "
"total blocks", part.mountpoint, blocks)
# dosfs image for EFI boot
bootimg = "%s/efi.img" % isodir
dosfs_cmd = 'mkfs.vfat -n "EFIimg" -S 512 -C %s %d' \
% (bootimg, blocks)
exec_native_cmd(dosfs_cmd, native_sysroot)
mmd_cmd = "mmd -i %s ::/EFI" % bootimg
exec_native_cmd(mmd_cmd, native_sysroot)
mcopy_cmd = "mcopy -i %s -s %s/EFI/* ::/EFI/" \
% (bootimg, isodir)
exec_native_cmd(mcopy_cmd, native_sysroot)
chmod_cmd = "chmod 644 %s" % bootimg
exec_cmd(chmod_cmd)
# Prepare files for legacy boot
syslinux_dir = get_bitbake_var("STAGING_DATADIR")
if not syslinux_dir:
raise WicError("Couldn't find STAGING_DATADIR, exiting.")
if os.path.exists("%s/isolinux" % isodir):
shutil.rmtree("%s/isolinux" % isodir)
install_cmd = "install -d %s/isolinux" % isodir
exec_cmd(install_cmd)
cls.do_configure_syslinux(creator, cr_workdir)
install_cmd = "install -m 444 %s/syslinux/ldlinux.sys " % syslinux_dir
install_cmd += "%s/isolinux/ldlinux.sys" % isodir
exec_cmd(install_cmd)
install_cmd = "install -m 444 %s/syslinux/isohdpfx.bin " % syslinux_dir
install_cmd += "%s/isolinux/isohdpfx.bin" % isodir
exec_cmd(install_cmd)
install_cmd = "install -m 644 %s/syslinux/isolinux.bin " % syslinux_dir
install_cmd += "%s/isolinux/isolinux.bin" % isodir
exec_cmd(install_cmd)
install_cmd = "install -m 644 %s/syslinux/ldlinux.c32 " % syslinux_dir
install_cmd += "%s/isolinux/ldlinux.c32" % isodir
exec_cmd(install_cmd)
#create ISO image
iso_img = "%s/tempiso_img.iso" % cr_workdir
iso_bootimg = "isolinux/isolinux.bin"
iso_bootcat = "isolinux/boot.cat"
efi_img = "efi.img"
mkisofs_cmd = "mkisofs -V %s " % part.label
mkisofs_cmd += "-o %s -U " % iso_img
mkisofs_cmd += "-J -joliet-long -r -iso-level 2 -b %s " % iso_bootimg
mkisofs_cmd += "-c %s -no-emul-boot -boot-load-size 4 " % iso_bootcat
mkisofs_cmd += "-boot-info-table -eltorito-alt-boot "
mkisofs_cmd += "-eltorito-platform 0xEF -eltorito-boot %s " % efi_img
mkisofs_cmd += "-no-emul-boot %s " % isodir
logger.debug("running command: %s", mkisofs_cmd)
exec_native_cmd(mkisofs_cmd, native_sysroot)
shutil.rmtree(isodir)
du_cmd = "du -Lbks %s" % iso_img
out = exec_cmd(du_cmd)
isoimg_size = int(out.split()[0])
part.size = isoimg_size
part.source_file = iso_img
