# -*- coding: latin-1 -*-
'''
Baseado no exemplo disponibilizado pela biblioteca
Exemplo de escrita dos dados da leitura do conversor ADC
em uma arquivo txt
Gustavo Voltani von Atzingen 15/04/2017
Curso IoT 2017 - IFSP Piracicaba
'''
import time
from wiringx86 import GPIOGalileo as GPIO
pinos = GPIO(debug=False)
pinos.pinMode(14, pinos.ANALOG_INPUT)
while 1:
with open('dados.txt', 'a') as f:
valor = pinos.analogRead(14)
f.write(str(valor) + '\n')
print str(valor) + '\n'
time.sleep(1)
# coding: latin1
'''
Baseado no exemplo disponibilizado pela biblioteca
Exemplo de manipulação de GPIO como entrada usando a bilbioteca wiringx86
Gustavo Voltani von Atzingen 15/04/2017
Updated: 28/09/2017
Curso IoT 2017 - IFSP Piracicaba
'''
import time
from wiringx86 import GPIOGalileo as GPIO
pinos = GPIO(debug=False)
numero_pino = 13
pinos.pinMode(numero_pino, pinos.INPUT)
try:
while True:
print pinos.digitalWrite(numero_pino)
time.sleep(1)
except KeyboardInterrupt:
print '\nLimpando o uso para fechar o programa'
pinos.cleanup()
import time from upm import pyupm_temperature as upm from wiringx86 import GPIOGalileo as GPIO pinos = GPIO(debug=False) pino_sensor_temperatura = 0 pino_cooler = 5 pino_sensor_luminosidade = 15 pino_LED = 4 pino_sensor_umidade = 16 pino_bomba = 6 pinos.pinMode(pino_sensor_luminosidade, pinos.ANALOG_INPUT) pinos.pinMode(pino_LED, pinos.OUTPUT) pinos.pinMode(pino_sensor_umidade, pinos.ANALOG_INPUT) pinos.pinMode(pino_bomba, pinos.OUTPUT) pinos.pinMode(pino_cooler, pinos.OUTPUT) def leitura_temperatura(): temperatura = upm.Temperature(pino_sensor_temperatura) celsius = temperatura.value() return celsius def liga_cooler(): pinos.digitalWrite(pino_cooler, pinos.HIGH) def desliga_cooler(): pinos.digitalWrite(pino_cooler, pinos.LOW) def leitura_LDR(): luminosidade = pinos.analogRead(pino_sensor_luminosidade)
Professor: Gustavo Voltani von Atzingen
alterações: Giovana Tangerino
'''
from wiringx86 import GPIOGalileo as GPIO
from upm import pyupm_jhd1313m1 as lcd
#pinos GPIO
pino_led_red = 8 #D8
pino_led_green = 7 #D7
pino_led_blue = 6 #D6
# numeracao dos pinos conectados aos sensores de acordo com a bibliteca usada
pinos = GPIO(debug=False)
tela = lcd.Jhd1313m1(0, 0x3E, 0x62)
pinos.pinMode(pino_led_red, pinos.OUTPUT)
pinos.pinMode(pino_led_green, pinos.OUTPUT)
pinos.pinMode(pino_led_blue, pinos.OUTPUT)
def escreve_lcd(texto_linha1, texto_linha2):
tela.clear()
tela.setCursor(0, 0)
tela.write(texto_linha1)
tela.setCursor(1, 0)
tela.write(texto_linha2)
def escreve_lcd_cor(texto_linha1, texto_linha2, cor):
tela.clear()
tela.setCursor(0, 0)
from flask import Flask, request, render_template, redirect
import time
from wiringx86 import GPIOGalileo as Galileo
from threading import Timer
plug_status = {'a':'off', 'b':'off', 'c':'off'}
gpio = Galileo(debug = False)
plug_a_ctrl = 9
plug_b_ctrl = 10
plug_c_ctrl = 11
gpio.pinMode(plug_a_ctrl, gpio.OUTPUT)
gpio.pinMode(plug_b_ctrl, gpio.OUTPUT)
gpio.pinMode(plug_c_ctrl, gpio.OUTPUT)
gpio.digitalWrite(plug_a_ctrl, gpio.HIGH)
gpio.digitalWrite(plug_b_ctrl, gpio.HIGH)
gpio.digitalWrite(plug_c_ctrl, gpio.HIGH)
class parse_command:
global plug_a_ctrl
global plug_b_ctrl
global plug_c_ctrl
@staticmethod
def parse_name(name):
import time
from upm import pyupm_temperature as upm
from upm import pyupm_servo as servo
from wiringx86 import GPIOGalileo as GPIO
from upm import pyupm_jhd1313m1 as lcd
pino_sensor_temperatura = 0
pino_rele = 5
pino_pot = 15
pino_servo = 8
pinos = GPIO(debug=False)
pinos.pinMode(pino_rele, pinos.OUTPUT)
pinos.pinMode(pino_pot, pinos.ANALOG_INPUT)
pinos.pinMode(pino_servo, pinos.OUTPUT)
temperatura = upm.Temperature(pino_sensor_temperatura)
sg_servo = servo.ES08A(pino_servo)
tela = lcd.Jhd1313m1(0, 0x3E, 0x62)
def leitura_temperatura():
return temp.value()
def leitura_pot():
resulado = pinos.analogRead(pino_pot)
voltagem = resulado * 5.0 / 1023.0
return voltagem
def liga_rele():
# -*- coding: latin-1 -*-
'''
Curso IoT 2017 - IFSP Piracicaba
Professor: Gustavo Voltani von Atzingen
alterações: Giovana Tangerino
'''
from wiringx86 import GPIOGalileo as GPIO
from upm import pyupm_temperature as upm
# numeracao dos pinos conectados aos sensores de acordo com a bibliteca usada
pino_pot = 14 #Gbiblioteca PIOGalileo: A0=14, A1=15
pino_sensor_temperatura = 1 #biblioteca pyupm_temperature: A0=0, A1=1
pinos = GPIO(debug=False)
pinos.pinMode(pino_pot, pinos.ANALOG_INPUT)
temperatura = upm.Temperature(pino_sensor_temperatura)
def get_temp():
return temperatura.value()
def get_pot():
resultado_adc = pinos.analogRead(pino_pot)
voltagem = resultado_adc * 5.0 / 1023.0
return voltagem, resultado_adc
# Import the time module enable sleeps between turning the led on and off.
import time
# Import the GPIOEdison class from the wiringx86 module.
from wiringx86 import GPIOGalileo as GPIO
# Create a new instance of the GPIOEdison class.
# Setting debug=True gives information about the interaction with sysfs.
gpio = GPIO(debug=True)
pin = 4
analogpin = 16 # 13 digital, Analog inputs: 14-A0,15-A1,16-A2,17-A3,18-A4,19-A5
state = gpio.HIGH
# Set pin 13 to be used as an output GPIO pin.
print 'Setting up pin %d' % pin
gpio.pinMode(pin, gpio.OUTPUT)
gpio.pinMode(analogpin, gpio.ANALOG_INPUT)
print 'Blinking pin %d now...' % pin
try:
while (True):
# Write a state to the pin. ON or OFF.
gpio.digitalWrite(pin, state)
value = gpio.analogRead(analogpin)
temp = value * 5 / 1024.0
temp_2 = temp - 0.5
temp_3 = (temp_2 / 0.01)
print "Value from " + str(analogpin) + " is: " + str(
value) + " | temp: " + str(temp_3)
# Toggle the state.
from wiringx86 import GPIOGalileo as Galileo
gpio = Galileo(debug = True)
def pinnumber(pin):
if pin >= 14 or pin <=1:
return "Pin is not defined";
else:
return pin;
def turnmode(level):
if level == "on":
level = gpio.HIGH
elif level == "off":
level = gpio.LOW
else:
return "Turn mode is not defined";
return level;
while True:
pin = int(raw_input("Enter pin number between 2-13: "))
level = raw_input("Enter turn mode on/off: ")
gpio.pinMode(pinnumber(pin), gpio.OUTPUT)
gpio.digitalWrite(pinnumber(pin), turnmode(level))
# coding: latin1
'''
Baseado no exemplo disponibilizado pela biblioteca
Exemplo de manipulação de GPIO como entrada usando a bilbioteca wiringx86
Gustavo Voltani von Atzingen 15/04/2017
Updated: 28/09/2017
Curso IoT 2017 - IFSP Piracicaba
'''
import time
from wiringx86 import GPIOGalileo as GPIO
pinos = GPIO(debug=False)
numero_pino = 13
pinos.pinMode(numero_pino, pinos.OUTPUT)
try:
while True:
pinos.digitalWrite(numero_pino, pinos.HIGH)
time.sleep(1)
pinos.digitalWrite(numero_pino, pinos.LOW)
time.sleep(1)
except KeyboardInterrupt:
print '\nLimpando o uso para fechar o programa'
pinos.digitalWrite(numero_pino, pinos.LOW)
pinos.cleanup()
A2 - 16
A3 - 17
A4 - 18
A5 - 19
'''
# main instance
gpio = GPIO(debug=True)
# Hardware pin definitions
UVOUT = 14 # Analog A0 Output from the sensor
REF_3V3 = 15 # 3.3V power on the Arduino board
# setting pin type
# gpio.pinMode( _pin_, gpio.OUTPUT)
gpio.pinMode(UVOUT, gpio.ANALOG_INPUT)
gpio.pinMode(REF_3V3, gpio.ANALOG_INPUT)
def mapfloat(x, in_min, in_max, out_min, out_max):
return float((x - in_min) * (out_max - out_min) / (in_max - in_min) +
out_min)
def averageAnalogRead(pin, avg=8):
read_value = 0
for read in range(1, avg):
read_value += gpio.analogRead(pin)
return float(read_value / avg)
from time import time
import urllib2, json
from wiringx86 import GPIOGalileo as GPIO
pinos = GPIO(debug=False)
from openweather import openweather
with open('config.txt') as json_data:
config = json.load(json_data)
piracicaba = openweather(config['api_key'], '3453643')
from upm import pyupm_jhd1313m1 as LCD
lcd = LCD.Jhd1313m1(0, 0x3E, 0x62)
from upm import pyupm_servo as servo
from upm import pyupm_temperature as upm
import threading
pino_sensor_temperatura = 0
pino_rele1 = 4
pino_servo = 5
pino_rele2 = 8
pino_pot = 15
pino_pot2 = 16
pino_pot3 = 17
pinos.pinMode(pino_rele1, pinos.OUTPUT)
pinos.pinMode(pino_rele2, pinos.OUTPUT)
pinos.pinMode(pino_pot, pinos.ANALOG_INPUT)
pinos.pinMode(pino_pot2, pinos.ANALOG_INPUT)
pinos.pinMode(pino_pot3, pinos.ANALOG_INPUT)
pinos.pinMode(pino_servo, pinos.PWM)
sg_servo = servo.ES08A(pino_servo)
pinos.digitalWrite(pino_rele1, pinos.LOW)
pinos.digitalWrite(pino_rele2, pinos.LOW)
from wiringx86 import GPIOGalileo as GPIO
from upm import pyupm_jhd1313m1 as lcd
# definicoes do lcd
tela = lcd.Jhd1313m1(0, 0x3E, 0x62)
tela.clear()
tela.setCursor(0, 0)
# pinos fisicos conectados ao shield grove
pino_pot = 14
pino_botao = 5
pino_rele = 13
# cria o objeto para leitura do potenciometro
potenciometro = GPIO(debug=False)
potenciometro.pinMode(pino_pot, potenciometro.ANALOG_INPUT)
# cria o objeto para leitura do rele
rele = GPIO(debug=False)
rele.pinMode(pino_rele, rele.OUTPUT)
# cria o objeto para leitura do botao
botao = GPIO(debug=False)
botao.pinMode(pino_botao, botao.INPUT)
def leitura_pot():
try:
return potenciometro.analogRead(pino_pot)
except Exception as e:
print 'erro leitura_pot', e
def main(argv):
gpio = GPIO(debug=True)
pin = 13
state = gpio.HIGH
servo_pin = 9
gpio.pinMode(pin, gpio.OUTPUT)
gpio.pinMode(servo_pin, gpio.PWM)
# PWM period for G2 is same for all pins so second call is redundant
pwm_period = 3000000
gpio.setPWMPeriod(servo_pin, pwm_period)
# Turn on LED
gpio.digitalWrite(pin, gpio.HIGH)
# Read analog input from pin 14
adc_l = 14 # A0
# Set pin 14 to be used as an analog input GPIO pin.
gpio.pinMode(adc_l, gpio.ANALOG_INPUT)
# With a 100 Ohm resistor and 3.3K resistor and 10k Pot the min max vals
# read from the ADC are around
min_val = 204
max_val = 994
val_range = float(max_val - min_val)
# Servo min and max pulse in ms
min_pulse = 500000
max_pulse = 2500000
pulse_range = float(max_pulse-min_pulse)
print 'Analog reading from pin %d now...' % adc_l
try:
old_pulse_length = 0
while(True):
value_l = gpio.analogRead(adc_l)
print value_l
print ""
norm_val = float(value_l - min_val) / val_range
norm_val = min( max(0.0, norm_val), 1.0 )
print norm_val
# What is duty cycle?
pulse_length = (norm_val * pulse_range) + min_pulse
pulse_pct = float(abs(pulse_length - old_pulse_length)) / \
float(pulse_length)
# Only write new duty cycle if there is significant change from
# previous value
if pulse_pct > 0.02:
gpio.analogWrite(servo_pin, \
int(float(pulse_length)/pwm_period * 255.0))
else:
pass
old_pulse_length = pulse_length
time.sleep(0.2)
except KeyboardInterrupt:
gpio.analogWrite(servo_pin, 0)
# Leave the led turned off.
gpio.digitalWrite(pin, gpio.LOW)
print '\nCleaning up...'
gpio.cleanup()
# -*- coding: latin-1 -*-
'''
Baseado no exemplo disponibilizado pela biblioteca wiringx86 para GalileoBoard
Exemplo de leitura do conversor ADC ("leitura analógica")
Gustavo Voltani von Atzingen 15/04/2017
Updated: 28/09/2017
Curso IoT 2017 - IFSP Piracicaba
'''
import time
from wiringx86 import GPIOGalileo as GPIO
pinos = GPIO(debug=False) # Degub False para evitar info no terminal
pinos.pinMode(14, pinos.ANALOG_INPUT) # A0 = 14, A1 = 15, ...
while 1:
valor = pinos.analogRead(14)
print valor
time.sleep(1)
def main(argv):
gpio = GPIO(debug=True)
pin = 13
state = gpio.HIGH
servo_pin = 9
gpio.pinMode(pin, gpio.OUTPUT)
gpio.pinMode(servo_pin, gpio.PWM)
# PWM period for G2 is same for all pins so second call is redundant
pwm_period = 3000000
gpio.setPWMPeriod(servo_pin, pwm_period)
# Turn on LED
gpio.digitalWrite(pin, gpio.HIGH)
# Read analog input from pin 14
adc_l = 14 # A0
# Set pin 14 to be used as an analog input GPIO pin.
gpio.pinMode(adc_l, gpio.ANALOG_INPUT)
# With a 100 Ohm resistor and 3.3K resistor and 10k Pot the min max vals
# read from the ADC are around
min_val = 204
max_val = 994
val_range = float(max_val - min_val)
# Servo min and max pulse in ms
min_pulse = 500000
max_pulse = 2500000
pulse_range = float(max_pulse - min_pulse)
print 'Analog reading from pin %d now...' % adc_l
try:
old_pulse_length = 0
while (True):
value_l = gpio.analogRead(adc_l)
print value_l
print ""
norm_val = float(value_l - min_val) / val_range
norm_val = min(max(0.0, norm_val), 1.0)
print norm_val
# What is duty cycle?
pulse_length = (norm_val * pulse_range) + min_pulse
pulse_pct = float(abs(pulse_length - old_pulse_length)) / \
float(pulse_length)
# Only write new duty cycle if there is significant change from
# previous value
if pulse_pct > 0.02:
gpio.analogWrite(servo_pin, \
int(float(pulse_length)/pwm_period * 255.0))
else:
pass
old_pulse_length = pulse_length
time.sleep(0.2)
except KeyboardInterrupt:
gpio.analogWrite(servo_pin, 0)
# Leave the led turned off.
gpio.digitalWrite(pin, gpio.LOW)
print '\nCleaning up...'
gpio.cleanup()
