def connect(self):
if not self._is_ready:
if not self.adb_name: # pylint: disable=E0203
with open_serial_connection(timeout=self.timeout,
port=self.port,
baudrate=self.baudrate,
init_dtr=0) as target:
target.sendline('')
self.logger.debug('Waiting for the Android prompt.')
target.expect(self.android_prompt)
self.logger.debug('Waiting for IP address...')
wait_start_time = time.time()
while True:
target.sendline('ip addr list eth0')
time.sleep(1)
try:
target.expect('inet ([1-9]\d*.\d+.\d+.\d+)',
timeout=10)
self.adb_name = target.match.group(1) + ':5555' # pylint: disable=W0201
break
except pexpect.TIMEOUT:
pass # We have our own timeout -- see below.
if (time.time() -
wait_start_time) > self.ready_timeout:
raise DeviceError('Could not acquire IP address.')
if self.adb_name in adb_list_devices():
adb_disconnect(self.adb_name)
adb_connect(self.adb_name, timeout=self.timeout)
super(Juno, self).connect() # wait for boot to complete etc.
self._is_ready = True
def connect(self):
if not self._is_ready:
if not self.adb_name: # pylint: disable=E0203
with open_serial_connection(timeout=self.timeout,
port=self.port,
baudrate=self.baudrate,
init_dtr=0) as target:
target.sendline('')
self.logger.debug('Waiting for the Android prompt.')
target.expect(self.android_prompt)
self.logger.debug('Waiting for IP address...')
wait_start_time = time.time()
while True:
target.sendline('ip addr list eth0')
time.sleep(1)
try:
target.expect('inet ([1-9]\d*.\d+.\d+.\d+)', timeout=10)
self.adb_name = target.match.group(1) + ':5555' # pylint: disable=W0201
break
except pexpect.TIMEOUT:
pass # We have our own timeout -- see below.
if (time.time() - wait_start_time) > self.ready_timeout:
raise DeviceError('Could not acquire IP address.')
if self.adb_name in adb_list_devices():
adb_disconnect(self.adb_name)
adb_connect(self.adb_name, timeout=self.timeout)
super(Juno, self).connect() # wait for boot to complete etc.
self._is_ready = True
def connect(self):
if not self._is_ready:
if self.config.adb_name:
self.adb_name = self.config.adb_name # pylint: disable=attribute-defined-outside-init
else:
with open_serial_connection(
timeout=self.config.serial_max_timeout,
port=self.config.serial_device,
baudrate=self.config.serial_baud) as target:
# Get IP address and push the Gator and PMU logger.
target.sendline(
'su'
) # as of Android v5.0.2, Linux does not boot into root shell
target.sendline('netcfg')
ipaddr_re = re.compile('eth0 +UP +(.+)/.+', re.MULTILINE)
target.expect(ipaddr_re)
output = target.after
match = re.search('eth0 +UP +(.+)/.+', output)
if not match:
raise DeviceError('Could not get adb IP address.')
ipaddr = match.group(1)
# Connect to device using adb.
target.expect(self.android_prompt) # pylint: disable=E1101
self.adb_name = ipaddr + ":5555" # pylint: disable=W0201
if self.adb_name in adb_list_devices():
adb_disconnect(self.adb_name)
adb_connect(self.adb_name)
self._is_ready = True
self.execute("input keyevent 82", timeout=ADB_SHELL_TIMEOUT)
self.execute("svc power stayon true", timeout=ADB_SHELL_TIMEOUT)
def connect(self):
if not self._is_ready:
if self.config.adb_name:
self.adb_name = self.config.adb_name # pylint: disable=attribute-defined-outside-init
else:
with open_serial_connection(timeout=self.config.serial_max_timeout,
port=self.config.serial_device,
baudrate=self.config.serial_baud) as target:
# Get IP address and push the Gator and PMU logger.
target.sendline('su') # as of Android v5.0.2, Linux does not boot into root shell
target.sendline('netcfg')
ipaddr_re = re.compile('eth0 +UP +(.+)/.+', re.MULTILINE)
target.expect(ipaddr_re)
output = target.after
match = re.search('eth0 +UP +(.+)/.+', output)
if not match:
raise DeviceError('Could not get adb IP address.')
ipaddr = match.group(1)
# Connect to device using adb.
target.expect(self.android_prompt) # pylint: disable=E1101
self.adb_name = ipaddr + ":5555" # pylint: disable=W0201
if self.adb_name in adb_list_devices():
adb_disconnect(self.adb_name)
adb_connect(self.adb_name)
self._is_ready = True
self.execute("input keyevent 82", timeout=ADB_SHELL_TIMEOUT)
self.execute("svc power stayon true", timeout=ADB_SHELL_TIMEOUT)
def connect(self): # NOQA pylint: disable=R0912
iteration_number = 0
max_iterations = self.ready_timeout / self.delay
available = False
self.logger.debug('Polling for device {}...'.format(self.adb_name))
while iteration_number < max_iterations:
devices = adb_list_devices()
if self.adb_name:
for device in devices:
if device.name == self.adb_name and device.status != 'offline':
available = True
else: # adb_name not set
if len(devices) == 1:
available = True
elif len(devices) > 1:
raise DeviceError(
'More than one device is connected and adb_name is not set.'
)
if available:
break
else:
time.sleep(self.delay)
iteration_number += 1
else:
raise DeviceError('Could not boot {} ({}).'.format(
self.name, self.adb_name))
while iteration_number < max_iterations:
available = (1 == int('0' +
adb_shell(self.adb_name,
'getprop sys.boot_completed',
timeout=self.default_timeout)))
if available:
break
else:
time.sleep(self.delay)
iteration_number += 1
else:
raise DeviceError('Could not boot {} ({}).'.format(
self.name, self.adb_name))
if self._just_rebooted:
self.logger.debug('Waiting for boot to complete...')
# On some devices, adb connection gets reset some time after booting.
# This causes errors during execution. To prevent this, open a shell
# session and wait for it to be killed. Once its killed, give adb
# enough time to restart, and then the device should be ready.
# TODO: This is more of a work-around rather than an actual solution.
# Need to figure out what is going on the "proper" way of handling it.
try:
adb_shell(self.adb_name, '', timeout=20)
time.sleep(5) # give adb time to re-initialize
except TimeoutError:
pass # timed out waiting for the session to be killed -- assume not going to be.
self.logger.debug('Boot completed.')
self._just_rebooted = False
self._is_ready = True
def connect(self): # NOQA pylint: disable=R0912
iteration_number = 0
max_iterations = self.ready_timeout / self.delay
available = False
self.logger.debug("Polling for device {}...".format(self.adb_name))
while iteration_number < max_iterations:
devices = adb_list_devices()
if self.adb_name:
for device in devices:
if device.name == self.adb_name and device.status != "offline":
available = True
else: # adb_name not set
if len(devices) == 1:
available = True
elif len(devices) > 1:
raise DeviceError("More than one device is connected and adb_name is not set.")
if available:
break
else:
time.sleep(self.delay)
iteration_number += 1
else:
raise DeviceError("Could not boot {} ({}).".format(self.name, self.adb_name))
while iteration_number < max_iterations:
available = (
int("0" + (adb_shell(self.adb_name, "getprop sys.boot_completed", timeout=self.default_timeout))) == 1
)
if available:
break
else:
time.sleep(self.delay)
iteration_number += 1
else:
raise DeviceError("Could not boot {} ({}).".format(self.name, self.adb_name))
if self._just_rebooted:
self.logger.debug("Waiting for boot to complete...")
# On some devices, adb connection gets reset some time after booting.
# This causes errors during execution. To prevent this, open a shell
# session and wait for it to be killed. Once its killed, give adb
# enough time to restart, and then the device should be ready.
# TODO: This is more of a work-around rather than an actual solution.
# Need to figure out what is going on the "proper" way of handling it.
try:
adb_shell(self.adb_name, "", timeout=20)
time.sleep(5) # give adb time to re-initialize
except TimeoutError:
pass # timed out waiting for the session to be killed -- assume not going to be.
self.logger.debug("Boot completed.")
self._just_rebooted = False
self._is_ready = True