def __init__(self,scl_long_tuneup_controller):
self.scl_long_tuneup_controller = scl_long_tuneup_controller
self.setLayout(BorderLayout())
#----etched border
etched_border = BorderFactory.createEtchedBorder()
titled_border = BorderFactory.createTitledBorder(etched_border,"BPM Table and Plots")
self.setBorder(titled_border)
#----------------------------------------
self.bpm_table = JTable(Energy_Meter_BPMs_Table_Model(self.scl_long_tuneup_controller))
self.bpm_table.setSelectionMode(ListSelectionModel.SINGLE_SELECTION)
self.bpm_table.setFillsViewportHeight(true)
self.bpm_table.setPreferredScrollableViewportSize(Dimension(400,300))
scrl_panel = JScrollPane(self.bpm_table)
scrl_panel.setBorder(etched_border)
bpm_table_panel = JPanel(BorderLayout())
bpm_table_panel.add(scrl_panel,BorderLayout.WEST)
#-----------------------------------------
self.gp_bpm_phase_err = FunctionGraphsJPanel()
self.gp_bpm_phase_err.setLegendButtonVisible(true)
self.gp_bpm_phase_err.setChooseModeButtonVisible(true)
self.gp_bpm_phase_err.setName("BPM Phase Errors")
self.gp_bpm_phase_err.setAxisNames("position, [m]","BPM Phase Error, [deg]")
self.gp_bpm_phase_err.setBorder(etched_border)
bpm_graph_panel = JPanel(BorderLayout())
bpm_graph_panel.add(self.gp_bpm_phase_err)
#------graph data
self.bpm_phase_err_gd = BasicGraphData()
self.bpm_phase_err_gd.setGraphPointSize(8)
self.bpm_phase_err_gd.setDrawLinesOn(false)
self.bpm_phase_err_gd.setGraphColor(Color.BLUE)
self.gp_bpm_phase_err.addGraphData(self.bpm_phase_err_gd)
#-----------------------------------------
self.add(bpm_table_panel,BorderLayout.WEST)
self.add(bpm_graph_panel,BorderLayout.CENTER)
def __init__(self, title):
self.gpF = FunctionGraphsJPanel()
self.gpF.setLegendButtonVisible(true)
self.gpF.setChooseModeButtonVisible(true)
self.gpF.setName(title)
self.gpF.setAxisNames("time, [sec]","Value, [arb. units]")
etched_border = BorderFactory.createEtchedBorder()
self.gpF.setBorder(etched_border)
self.gd_arr = []
self.color_arr = [Color.BLUE,Color.BLACK,Color.RED,Color.GREEN,Color.MAGENTA]
def __init__(self,scl_long_tuneup_controller):
self.scl_long_tuneup_controller = scl_long_tuneup_controller
self.setLayout(GridLayout(1,1))
#----etched border
etched_border = BorderFactory.createEtchedBorder()
self.setBorder(etched_border)
self.gp_energy_plot = FunctionGraphsJPanel()
self.gp_energy_plot.setLegendButtonVisible(true)
self.gp_energy_plot.setChooseModeButtonVisible(true)
self.gp_energy_plot.setName("Output Energy vs. Cavity Phase: ")
self.gp_energy_plot.setAxisNames("Cav Phase, [deg]","Ekin Out, [MeV]")
self.gp_energy_plot.setBorder(etched_border)
self.add(self.gp_energy_plot)
def __init__(self,scl_long_tuneup_controller):
self.scl_long_tuneup_controller = scl_long_tuneup_controller
self.setLayout(GridLayout(2,1))
#----etched border
etched_border = BorderFactory.createEtchedBorder()
self.setBorder(etched_border)
self.gp_bpm_phases = FunctionGraphsJPanel()
self.gp_bpm_amps = FunctionGraphsJPanel()
self.gp_bpm_phases.setLegendButtonVisible(true)
self.gp_bpm_phases.setChooseModeButtonVisible(true)
self.gp_bpm_amps.setLegendButtonVisible(true)
self.gp_bpm_amps.setChooseModeButtonVisible(true)
self.gp_bpm_phases.setName("BPM Phases")
self.gp_bpm_phases.setAxisNames("Cav Phase, [deg]","BPM Phase, [deg]")
self.gp_bpm_amps.setName("BPM Amplitude")
self.gp_bpm_amps.setAxisNames("Cav Phase, [deg]","Amplitude, a.u.")
self.gp_bpm_phases.setBorder(etched_border)
self.gp_bpm_amps.setBorder(etched_border)
self.add(self.gp_bpm_phases)
self.add(self.gp_bpm_amps)
def __init__(self, scl_scan_data_cleanup_controller):
self.scl_scan_data_cleanup_controller = scl_scan_data_cleanup_controller
self.setLayout(GridLayout(2, 1))
#----etched border
etched_border = BorderFactory.createEtchedBorder()
self.setBorder(etched_border)
self.gp_bpm_phases = FunctionGraphsJPanel()
self.gp_bpm_amps = FunctionGraphsJPanel()
self.gp_bpm_phases.setLegendButtonVisible(true)
self.gp_bpm_phases.setChooseModeButtonVisible(true)
self.gp_bpm_amps.setLegendButtonVisible(true)
self.gp_bpm_amps.setChooseModeButtonVisible(true)
self.gp_bpm_phases.setName("BPM Phases")
self.gp_bpm_phases.setAxisNames("Cav Phase, [deg]", "BPM Phase, [deg]")
self.gp_bpm_amps.setName("BPM Amplitude")
self.gp_bpm_amps.setAxisNames("Cav Phase, [deg]", "Amplitude, a.u.")
self.gp_bpm_phases.setBorder(etched_border)
self.gp_bpm_amps.setBorder(etched_border)
self.add(self.gp_bpm_phases)
self.add(self.gp_bpm_amps)
def __init__(self,scl_long_tuneup_controller):
self.scl_long_tuneup_controller = scl_long_tuneup_controller
self.setLayout(GridLayout(1,1))
#----etched border
etched_border = BorderFactory.createEtchedBorder()
self.setBorder(etched_border)
self.gp_bpm_phaseDiff = FunctionGraphsJPanel()
self.gp_bpm_phaseDiff.setLegendButtonVisible(true)
self.gp_bpm_phaseDiff.setChooseModeButtonVisible(true)
self.gp_bpm_phaseDiff.setName("BPMs Phase Difference: ")
self.gp_bpm_phaseDiff.setAxisNames("Cav Phase, [deg]","BPMs Phase Diff., [deg]")
self.gp_bpm_phaseDiff.setBorder(etched_border)
self.add(self.gp_bpm_phaseDiff)
def __init__(self,dtl_acceptance_scans_controller):
self.dtl_acceptance_scans_controller = dtl_acceptance_scans_controller
self.main_loop_controller = self.dtl_acceptance_scans_controller.main_loop_controller
#----------------------------------------
etched_border = BorderFactory.createEtchedBorder()
self.gp_acc_scan = FunctionGraphsJPanel()
self.gp_scan_width = FunctionGraphsJPanel()
#------------------------------------------
self.gp_acc_scan.setLegendButtonVisible(true)
self.gp_scan_width.setLegendButtonVisible(true)
#------------------------------------------
self.gp_acc_scan.setChooseModeButtonVisible(true)
self.gp_scan_width.setChooseModeButtonVisible(true)
#------------------------------------------
self.gp_acc_scan.setName("Acceptance Scan: FC vs. RF Phase")
self.gp_scan_width.setName("Acc. Width vs. RF Ampl")
self.gp_acc_scan.setAxisNames("Cav Phase, [deg]","FC Q, [a.u.]")
self.gp_scan_width.setAxisNames("RF Amplitude, [a.u]","Acceptance Width, [deg]")
self.gp_acc_scan.setBorder(etched_border)
self.gp_scan_width.setBorder(etched_border)
#---------------------------------------------
self.graphs_panel = JTabbedPane()
self.graphs_panel.add("Acceptance Scan Data",self.gp_acc_scan)
self.graphs_panel.add("Acc. Width",self.gp_scan_width)
def __init__(self,transverse_twiss_analysis_Controller):
self.transverse_twiss_analysis_Controller = transverse_twiss_analysis_Controller
self.setLayout(GridLayout(3,1))
#----etched border
etched_border = BorderFactory.createEtchedBorder()
self.setBorder(etched_border)
self.gpanel_hor = FunctionGraphsJPanel()
self.gpanel_ver = FunctionGraphsJPanel()
self.gpanel_lon = FunctionGraphsJPanel()
self.gpanel_hor.setLegendButtonVisible(true)
self.gpanel_ver.setLegendButtonVisible(true)
self.gpanel_lon.setLegendButtonVisible(true)
self.gpanel_hor.setName("Horizontal Size")
self.gpanel_hor.setAxisNames("pos, [m]","Size, [mm]")
self.gpanel_ver.setName("Vertical Size")
self.gpanel_ver.setAxisNames("pos, [m]","Size, [mm]")
self.gpanel_lon.setName("Longitudinal Size, RF Freq. = 402.5 MHz")
self.gpanel_lon.setAxisNames("pos, [m]","Size, [deg]")
self.gpanel_hor.setBorder(etched_border)
self.gpanel_ver.setBorder(etched_border)
self.gpanel_lon.setBorder(etched_border)
self.add(self.gpanel_hor)
self.add(self.gpanel_ver)
self.add(self.gpanel_lon)
class WS_LW_Acquisition_Controller:
def __init__(self,linac_wizard_document):
#--- linac_wizard_document the parent document for all controllers
self.linac_wizard_document = linac_wizard_document
self.main_panel = JPanel(GridLayout(2,1))
self.quadFieldDict = {}
self.cavAmpPhaseDict = {}
self.quads = []
self.cavs = []
self.ws_table_model = WS_Table_Model()
#----make LW or WS nodes
self.ws_nodes = []
#----etched border
etched_border = BorderFactory.createEtchedBorder()
#---make the WS_JTable + H&V Graphs Panels
self.ws_table = JTable(self.ws_table_model)
self.ws_table.setSelectionMode(ListSelectionModel.SINGLE_SELECTION)
self.ws_table.setFillsViewportHeight(true)
ws_panel = JPanel(BorderLayout())
ws_panel.add(JScrollPane(self.ws_table), BorderLayout.CENTER)
ws_knobs_panel = JPanel(FlowLayout(FlowLayout.CENTER,5,5))
ws_panel.add(ws_knobs_panel, BorderLayout.SOUTH)
ws_panel.setBorder(etched_border)
#---ws knobs ---------------------------------------------
get_ws_data_button = JButton("Get WS/LW Data")
switch_hv_button = JButton(" Switch H/V ")
add_data_to_pool_button = JButton(" Add Data to Pool ")
ws_knobs_panel.add(get_ws_data_button)
ws_knobs_panel.add(switch_hv_button)
ws_knobs_panel.add(add_data_to_pool_button)
get_ws_data_button.addActionListener(WS_GET_Data_Listener(self))
switch_hv_button.addActionListener(Switch_HV_Listener(self))
add_data_to_pool_button.addActionListener(WS_Data_to_Pool_Listener(self))
#---------------------------------------------------------
ws_and_graphs_panel = JPanel(BorderLayout())
border = BorderFactory.createTitledBorder(etched_border,"WS/LW Raw Data Acquisition")
ws_and_graphs_panel.setBorder(border)
ws_and_graphs_panel.add(ws_panel, BorderLayout.WEST)
graphs_panel = JPanel(GridLayout(1,2))
self.gpanel_horWF = FunctionGraphsJPanel()
self.gpanel_verWF = FunctionGraphsJPanel()
self.gpanel_horWF.setLegendButtonVisible(true)
self.gpanel_horWF.setChooseModeButtonVisible(true)
self.gpanel_verWF.setLegendButtonVisible(true)
self.gpanel_verWF.setChooseModeButtonVisible(true)
self.gpanel_horWF.setName("Horizontal Profiles")
self.gpanel_horWF.setAxisNames("pos, [mm]","Amp, [arb. units]")
self.gpanel_verWF.setName("Vertical Profiles")
self.gpanel_verWF.setAxisNames("pos, [mm]","Amp, [arb. units]")
self.gpanel_horWF.setBorder(etched_border)
self.gpanel_verWF.setBorder(etched_border)
graphs_panel.add(self.gpanel_horWF)
graphs_panel.add(self.gpanel_verWF)
ws_and_graphs_panel.add(graphs_panel, BorderLayout.CENTER)
self.setDataToGraphPanels(-1)
#------analysis sub-panel
self.ws_data_analysis_controller = WS_Data_Analysis_Controller(self)
#---put everything into the main_panel
self.main_panel.add(ws_and_graphs_panel)
self.main_panel.add(self.ws_data_analysis_controller.main_panel)
#---set up Listeners
self.ws_table.getSelectionModel().addListSelectionListener(WS_Table_Selection_Listener(self))
def setAccSeq(self,accSeq):
self.ws_table_model.ws_table_element_arr = []
self.ws_nodes = []
if(accSeq == null):
self.ws_table_model.fireTableDataChanged()
return
nodes = accSeq.filterNodesByStatus(accSeq.getAllNodesOfType(ProfileMonitor.s_strType),true)
for node in nodes:
self.ws_nodes.append(node)
nodes = accSeq.filterNodesByStatus(accSeq.getAllNodesOfType(Marker.s_strType),true)
for node in nodes:
if(node.getId().find("LW") >= 0 and node.getId().find("SCL") >= 0):
self.ws_nodes.append(node)
for node in self.ws_nodes:
self.ws_table_model.addWS_TableElement(WS_Table_Element(node))
self.makePVforWS()
#ws_table_elements_arr = self.ws_table_model.getWS_TableElements()
#for ws_table_element in ws_table_elements_arr:
# ws_table_element.readPVData()
#----update data and graphs
self.ws_table_model.fireTableDataChanged()
self.setDataToGraphPanels(-1)
#------------set up the quad and cavities dictionaries
self.quadFieldDict = {}
self.quads = accSeq.getAllNodesWithQualifier(AndTypeQualifier().and((OrTypeQualifier()).or(Quadrupole.s_strType)))
for quad in self.quads:
self.quadFieldDict[quad] = quad.getDfltField()
"""
if(quad.isPermanent()):
self.quadFieldDict[quad] = quad.getDfltField()
else:
self.quadFieldDict[quad] = quad.getFieldReadback()
"""
self.cavAmpPhaseDict = {}
rf_gaps = accSeq.getAllNodesWithQualifier(AndTypeQualifier().and((OrTypeQualifier()).or(RfGap.s_strType)))
self.cavs = []
for rf_gap in rf_gaps:
cav = rf_gap.getParent()
if(cav not in self.cavs):
self.cavs.append(cav)
amp = cav.getDfltCavAmp()
phase = cav.getDfltCavPhase()
self.cavAmpPhaseDict[cav] = [amp,phase]
def cleanOldWSdata(self):
#----clean all data for analysis -- may be we want to keep them?
ws_data_analysis_controller = self.ws_data_analysis_controller
ws_data_analysis_controller.ws_records_table_model.ws_rec_table_element_arr = []
ws_data_analysis_controller.ws_records_table_model.fireTableDataChanged()
tr_twiss_analysis_controller = self.linac_wizard_document.tr_twiss_analysis_controller
accStatesKeeper = tr_twiss_analysis_controller.accStatesKeeper
accStatesKeeper.clean()
tr_twiss_analysis_controller.dict_panel.dict_table.getModel().fireTableDataChanged()
def getFreshCopyQuadCavDict(self):
""" Returns a copy of the fresh dictionaries [quadFieldDict,cavAmpPhaseDict] """
quadFieldDict = {}
for quad in self.quads:
if(quad.isPermanent()):
self.quadFieldDict[quad] = quad.getDfltField()
else:
self.quadFieldDict[quad] = quad.getFieldReadback()
quadFieldDict[quad] = self.quadFieldDict[quad]
#print "debug quad=",quad.getId()," G=",self.quadFieldDict[quad]
cavAmpPhaseDict = {}
for cav in self.cavs:
amp = cav.getDfltCavAmp()
phase = cav.getDfltCavPhase()
self.cavAmpPhaseDict[cav] = [amp,phase]
cavAmpPhaseDict[cav] = [amp,phase]
return [quadFieldDict,cavAmpPhaseDict]
def getMainPanel(self):
return self.main_panel
def setDataToGraphPanels(self,index):
self.gpanel_horWF.removeAllGraphData()
self.gpanel_verWF.removeAllGraphData()
ws_table_elements_arr = self.ws_table_model.getWS_TableElements()
if(index < 0 or index >= len(ws_table_elements_arr)): return
ws_table_element = ws_table_elements_arr[index]
hor_record = ws_table_element.getRecords(WS_DIRECTION_HOR)
ver_record = ws_table_element.getRecords(WS_DIRECTION_VER)
self.gpanel_horWF.addGraphData(hor_record.gd_wf)
self.gpanel_verWF.addGraphData(ver_record.gd_wf)
def makePVforWS(self):
ws_table_elements_arr = self.ws_table_model.getWS_TableElements()
for ws_table_element in ws_table_elements_arr:
ws_node = ws_table_element.ws
if(ws_node.getId().find("WS") >= 0):
pv_pos_wf_name = ws_node.getId()+":Hor_prof_pos"
pv_wf_name = ws_node.getId()+":Hor_prof_sig"
sigma_name = ws_node.getId()+":Hor_Sigma_gs"
ws_table_element.setPV_Names(pv_pos_wf_name,pv_wf_name,sigma_name,WS_DIRECTION_HOR)
pv_pos_wf_name = ws_node.getId()+":Ver_prof_pos"
pv_wf_name = ws_node.getId()+":Ver_prof_sig"
sigma_name = ws_node.getId()+":Ver_Sigma_gs"
ws_table_element.setPV_Names(pv_pos_wf_name,pv_wf_name,sigma_name,WS_DIRECTION_VER)
else:
name = ws_node.getId().replace(":LW",":LW_")+":LASER_WIRE_axis"
pv_pos_wf_name = name+"01_ScanPosArray"
pv_wf_name = name+"01_Peak_Profile_WFM"
sigma_name = name+"01_Peak_Info_Sigma"
ws_table_element.setPV_Names(pv_pos_wf_name,pv_wf_name,sigma_name,WS_DIRECTION_HOR)
pv_pos_wf_name = name+"02_ScanPosArray"
pv_wf_name = name+"02_Peak_Profile_WFM"
sigma_name = name+"02_Peak_Info_Sigma"
ws_table_element.setPV_Names(pv_pos_wf_name,pv_wf_name,sigma_name,WS_DIRECTION_VER)
class BPM_PhaseDiff_Graph_Panel(JPanel):
def __init__(self,scl_long_tuneup_controller):
self.scl_long_tuneup_controller = scl_long_tuneup_controller
self.setLayout(GridLayout(1,1))
#----etched border
etched_border = BorderFactory.createEtchedBorder()
self.setBorder(etched_border)
self.gp_bpm_phaseDiff = FunctionGraphsJPanel()
self.gp_bpm_phaseDiff.setLegendButtonVisible(true)
self.gp_bpm_phaseDiff.setChooseModeButtonVisible(true)
self.gp_bpm_phaseDiff.setName("BPMs Phase Difference: ")
self.gp_bpm_phaseDiff.setAxisNames("Cav Phase, [deg]","BPMs Phase Diff., [deg]")
self.gp_bpm_phaseDiff.setBorder(etched_border)
self.add(self.gp_bpm_phaseDiff)
def removeAllGraphData(self):
self.gp_bpm_phaseDiff.removeAllGraphData()
def updateGraphData(self):
self.gp_bpm_phaseDiff.removeAllGraphData()
scl_long_tuneup_phase_scan_controller = self.scl_long_tuneup_controller.scl_long_tuneup_phase_scan_controller
cavs_table = scl_long_tuneup_phase_scan_controller.cavs_table
cav_selected_inds = cavs_table.getSelectedRows()
if(len(cav_selected_inds) == 0 or cav_selected_inds[0] < 0):
return
for ind in cav_selected_inds:
cav_wrapper = self.scl_long_tuneup_controller.cav0_wrapper
if(ind != 0):
cav_wrapper = self.scl_long_tuneup_controller.cav_wrappers[ind-1]
if(cav_wrapper == null or not cav_wrapper.isGood):
continue
self.gp_bpm_phaseDiff.addGraphData(cav_wrapper.phaseDiffPlot)
self.gp_bpm_phaseDiff.addGraphData(cav_wrapper.phaseDiffPlotTh)
class Cav_Energy_Out_Graph_Panel(JPanel):
def __init__(self,scl_long_tuneup_controller):
self.scl_long_tuneup_controller = scl_long_tuneup_controller
self.setLayout(GridLayout(1,1))
#----etched border
etched_border = BorderFactory.createEtchedBorder()
self.setBorder(etched_border)
self.gp_energy_plot = FunctionGraphsJPanel()
self.gp_energy_plot.setLegendButtonVisible(true)
self.gp_energy_plot.setChooseModeButtonVisible(true)
self.gp_energy_plot.setName("Output Energy vs. Cavity Phase: ")
self.gp_energy_plot.setAxisNames("Cav Phase, [deg]","Ekin Out, [MeV]")
self.gp_energy_plot.setBorder(etched_border)
self.add(self.gp_energy_plot)
def removeAllGraphData(self):
self.gp_energy_plot.removeAllGraphData()
def updateGraphData(self):
self.gp_energy_plot.removeAllGraphData()
scl_long_tuneup_phase_analysis_controller = self.scl_long_tuneup_controller.scl_long_tuneup_phase_analysis_controller
cavs_table = scl_long_tuneup_phase_analysis_controller.cavs_table
cav_selected_inds = cavs_table.getSelectedRows()
if(len(cav_selected_inds) == 0 or cav_selected_inds[0] < 0):
return
for ind in cav_selected_inds:
cav_wrapper = self.scl_long_tuneup_controller.cav_wrappers[ind]
if(cav_wrapper == null or not cav_wrapper.isGood):
continue
self.gp_energy_plot.addGraphData(cav_wrapper.eKinOutPlot)
self.gp_energy_plot.addGraphData(cav_wrapper.eKinOutPlotTh)
class Graphs_Panel(JPanel):
def __init__(self,transverse_twiss_analysis_Controller):
self.transverse_twiss_analysis_Controller = transverse_twiss_analysis_Controller
self.setLayout(GridLayout(3,1))
#----etched border
etched_border = BorderFactory.createEtchedBorder()
self.setBorder(etched_border)
self.gpanel_hor = FunctionGraphsJPanel()
self.gpanel_ver = FunctionGraphsJPanel()
self.gpanel_lon = FunctionGraphsJPanel()
self.gpanel_hor.setLegendButtonVisible(true)
self.gpanel_ver.setLegendButtonVisible(true)
self.gpanel_lon.setLegendButtonVisible(true)
self.gpanel_hor.setName("Horizontal Size")
self.gpanel_hor.setAxisNames("pos, [m]","Size, [mm]")
self.gpanel_ver.setName("Vertical Size")
self.gpanel_ver.setAxisNames("pos, [m]","Size, [mm]")
self.gpanel_lon.setName("Longitudinal Size, RF Freq. = 402.5 MHz")
self.gpanel_lon.setAxisNames("pos, [m]","Size, [deg]")
self.gpanel_hor.setBorder(etched_border)
self.gpanel_ver.setBorder(etched_border)
self.gpanel_lon.setBorder(etched_border)
self.add(self.gpanel_hor)
self.add(self.gpanel_ver)
self.add(self.gpanel_lon)
def removeAllGraphData(self):
self.gpanel_hor.removeAllGraphData()
self.gpanel_ver.removeAllGraphData()
self.gpanel_lon.removeAllGraphData()
def updateGraphData(self):
self.gpanel_hor.removeAllGraphData()
self.gpanel_ver.removeAllGraphData()
self.gpanel_lon.removeAllGraphData()
accStatesKeeper = self.transverse_twiss_analysis_Controller.accStatesKeeper
accStatesKeeper.updateGraphData()
accState = null
for accState0 in accStatesKeeper.getAccStatesArr():
if(accState0.isSelected()):
accState = accState0
break
if(accState == null): return
accState.updateGraphData()
self.gpanel_hor.addGraphData(accState.gd_exp_hor)
self.gpanel_hor.addGraphData(accState.gd_model_hor)
self.gpanel_ver.addGraphData(accState.gd_exp_ver)
self.gpanel_ver.addGraphData(accState.gd_model_ver)
self.gpanel_lon.addGraphData(accState.gd_model_lon)
#---set up vertical lines
self.gpanel_hor.removeHorizontalValues()
self.gpanel_ver.removeHorizontalValues()
self.gpanel_lon.removeHorizontalValues()
self.gpanel_hor.removeVerticalValues()
self.gpanel_ver.removeVerticalValues()
self.gpanel_lon.removeVerticalValues()
accSeq = self.transverse_twiss_analysis_Controller.linac_wizard_document.accSeq
quads = accSeq.getAllNodesWithQualifier((AndTypeQualifier().and((OrTypeQualifier()).or(Quadrupole.s_strType))).andStatus(true))
cavs = accSeq.getAllNodesWithQualifier((AndTypeQualifier().and((OrTypeQualifier()).or(RfCavity.s_strType))).andStatus(true))
for quad in quads:
pos = accSeq.getPosition(quad)
self.gpanel_hor.addVerticalLine(pos,Color.BLACK)
self.gpanel_ver.addVerticalLine(pos,Color.BLACK)
self.gpanel_lon.addVerticalLine(pos,Color.BLACK)
for cav in cavs:
pos = accSeq.getPosition(cav)
self.gpanel_hor.addVerticalLine(pos,Color.RED)
self.gpanel_ver.addVerticalLine(pos,Color.RED)
self.gpanel_lon.addVerticalLine(pos,Color.RED)
class WS_LW_Acquisition_Controller:
def __init__(self,linac_wizard_document):
#--- linac_wizard_document the parent document for all controllers
self.linac_wizard_document = linac_wizard_document
self.main_panel = JPanel(GridLayout(2,1))
self.quadFieldDict = {}
self.cavAmpPhaseDict = {}
self.quads = []
self.cavs = []
self.ws_table_model = WS_Table_Model()
#----make LW or WS nodes
self.ws_nodes = []
#----etched border
etched_border = BorderFactory.createEtchedBorder()
#---make the WS_JTable + H&V Graphs Panels
self.ws_table = JTable(self.ws_table_model)
self.ws_table.setSelectionMode(ListSelectionModel.SINGLE_SELECTION)
self.ws_table.setFillsViewportHeight(true)
ws_panel = JPanel(BorderLayout())
ws_panel.add(JScrollPane(self.ws_table), BorderLayout.CENTER)
ws_knobs_panel = JPanel(FlowLayout(FlowLayout.CENTER,5,5))
ws_panel.add(ws_knobs_panel, BorderLayout.SOUTH)
ws_panel.setBorder(etched_border)
#---ws knobs ---------------------------------------------
get_ws_data_button = JButton("Get WS/LW Data")
switch_hv_button = JButton(" Switch H/V ")
add_data_to_pool_button = JButton(" Add Data to Pool ")
ws_knobs_panel.add(get_ws_data_button)
ws_knobs_panel.add(switch_hv_button)
ws_knobs_panel.add(add_data_to_pool_button)
get_ws_data_button.addActionListener(WS_GET_Data_Listener(self))
switch_hv_button.addActionListener(Switch_HV_Listener(self))
add_data_to_pool_button.addActionListener(WS_Data_to_Pool_Listener(self))
#---------------------------------------------------------
ws_and_graphs_panel = JPanel(BorderLayout())
border = BorderFactory.createTitledBorder(etched_border,"WS/LW Raw Data Acquisition")
ws_and_graphs_panel.setBorder(border)
ws_and_graphs_panel.add(ws_panel, BorderLayout.WEST)
graphs_panel = JPanel(GridLayout(1,2))
self.gpanel_horWF = FunctionGraphsJPanel()
self.gpanel_verWF = FunctionGraphsJPanel()
self.gpanel_horWF.setLegendButtonVisible(true)
self.gpanel_horWF.setChooseModeButtonVisible(true)
self.gpanel_verWF.setLegendButtonVisible(true)
self.gpanel_verWF.setChooseModeButtonVisible(true)
self.gpanel_horWF.setName("Horizontal Profiles")
self.gpanel_horWF.setAxisNames("pos, [mm]","Amp, [arb. units]")
self.gpanel_verWF.setName("Vertical Profiles")
self.gpanel_verWF.setAxisNames("pos, [mm]","Amp, [arb. units]")
self.gpanel_horWF.setBorder(etched_border)
self.gpanel_verWF.setBorder(etched_border)
graphs_panel.add(self.gpanel_horWF)
graphs_panel.add(self.gpanel_verWF)
ws_and_graphs_panel.add(graphs_panel, BorderLayout.CENTER)
self.setDataToGraphPanels(-1)
#------analysis sub-panel
self.ws_data_analysis_controller = WS_Data_Analysis_Controller(self)
#---put everything into the main_panel
self.main_panel.add(ws_and_graphs_panel)
self.main_panel.add(self.ws_data_analysis_controller.main_panel)
#---set up Listeners
self.ws_table.getSelectionModel().addListSelectionListener(WS_Table_Selection_Listener(self))
def setAccSeq(self,accSeq):
self.ws_table_model.ws_table_element_arr = []
self.ws_nodes = []
if(accSeq == null):
self.ws_table_model.fireTableDataChanged()
return
nodes = accSeq.filterNodesByStatus(accSeq.getAllNodesOfType(ProfileMonitor.s_strType),true)
for node in nodes:
self.ws_nodes.append(node)
nodes = accSeq.filterNodesByStatus(accSeq.getAllNodesOfType(Marker.s_strType),true)
for node in nodes:
if(node.getId().find("LW") >= 0 and node.getId().find("SCL") >= 0):
self.ws_nodes.append(node)
for node in self.ws_nodes:
self.ws_table_model.addWS_TableElement(WS_Table_Element(node))
self.makePVforWS()
#ws_table_elements_arr = self.ws_table_model.getWS_TableElements()
#for ws_table_element in ws_table_elements_arr:
# ws_table_element.readPVData()
#----update data and graphs
self.ws_table_model.fireTableDataChanged()
self.setDataToGraphPanels(-1)
#------------set up the quad and cavities dictionaries
self.quadFieldDict = {}
self.quads = accSeq.getAllNodesWithQualifier(AndTypeQualifier().and((OrTypeQualifier()).or(Quadrupole.s_strType)))
for quad in self.quads:
self.quadFieldDict[quad] = quad.getDfltField()
"""
if(quad.isPermanent()):
self.quadFieldDict[quad] = quad.getDfltField()
else:
self.quadFieldDict[quad] = quad.getFieldReadback()
"""
self.cavAmpPhaseDict = {}
rf_gaps = accSeq.getAllNodesWithQualifier(AndTypeQualifier().and((OrTypeQualifier()).or(RfGap.s_strType)))
self.cavs = []
for rf_gap in rf_gaps:
cav = rf_gap.getParent()
if(cav not in self.cavs):
self.cavs.append(cav)
amp = cav.getDfltCavAmp()
phase = cav.getDfltCavPhase()
self.cavAmpPhaseDict[cav] = [amp,phase]
def cleanOldWSdata(self):
#----clean all data for analysis -- may be we want to keep them?
ws_data_analysis_controller = self.ws_data_analysis_controller
ws_data_analysis_controller.ws_records_table_model.ws_rec_table_element_arr = []
ws_data_analysis_controller.ws_records_table_model.fireTableDataChanged()
tr_twiss_analysis_controller = self.linac_wizard_document.tr_twiss_analysis_controller
accStatesKeeper = tr_twiss_analysis_controller.accStatesKeeper
accStatesKeeper.clean()
tr_twiss_analysis_controller.dict_panel.dict_table.getModel().fireTableDataChanged()
def getFreshCopyQuadCavDict(self):
""" Returns a copy of the fresh dictionaries [quadFieldDict,cavAmpPhaseDict] """
quadFieldDict = {}
for quad in self.quads:
if(quad.isPermanent()):
self.quadFieldDict[quad] = quad.getDfltField()
else:
self.quadFieldDict[quad] = quad.getFieldReadback()
quadFieldDict[quad] = self.quadFieldDict[quad]
#print "debug quad=",quad.getId()," G=",self.quadFieldDict[quad]
cavAmpPhaseDict = {}
for cav in self.cavs:
amp = cav.getDfltCavAmp()
phase = cav.getDfltCavPhase()
self.cavAmpPhaseDict[cav] = [amp,phase]
cavAmpPhaseDict[cav] = [amp,phase]
return [quadFieldDict,cavAmpPhaseDict]
def getMainPanel(self):
return self.main_panel
def setDataToGraphPanels(self,index):
self.gpanel_horWF.removeAllGraphData()
self.gpanel_verWF.removeAllGraphData()
ws_table_elements_arr = self.ws_table_model.getWS_TableElements()
if(index < 0 or index >= len(ws_table_elements_arr)): return
ws_table_element = ws_table_elements_arr[index]
hor_record = ws_table_element.getRecords(WS_DIRECTION_HOR)
ver_record = ws_table_element.getRecords(WS_DIRECTION_VER)
self.gpanel_horWF.addGraphData(hor_record.gd_wf)
self.gpanel_verWF.addGraphData(ver_record.gd_wf)
def makePVforWS(self):
ws_table_elements_arr = self.ws_table_model.getWS_TableElements()
for ws_table_element in ws_table_elements_arr:
ws_node = ws_table_element.ws
if(ws_node.getId().find("WS") >= 0):
pv_pos_wf_name = ws_node.getId()+":Hor_prof_pos"
pv_wf_name = ws_node.getId()+":Hor_prof_sig"
sigma_name = ws_node.getId()+":Hor_Sigma_gs"
ws_table_element.setPV_Names(pv_pos_wf_name,pv_wf_name,sigma_name,WS_DIRECTION_HOR)
pv_pos_wf_name = ws_node.getId()+":Ver_prof_pos"
pv_wf_name = ws_node.getId()+":Ver_prof_sig"
sigma_name = ws_node.getId()+":Ver_Sigma_gs"
ws_table_element.setPV_Names(pv_pos_wf_name,pv_wf_name,sigma_name,WS_DIRECTION_VER)
else:
name = ws_node.getId().replace(":LW",":LW_")+":LASER_WIRE_axis"
pv_pos_wf_name = name+"01_ScanPosArray"
pv_wf_name = name+"01_Peak_Profile_WFM"
sigma_name = name+"01_Peak_Info_Sigma"
ws_table_element.setPV_Names(pv_pos_wf_name,pv_wf_name,sigma_name,WS_DIRECTION_HOR)
pv_pos_wf_name = name+"02_ScanPosArray"
pv_wf_name = name+"02_Peak_Profile_WFM"
sigma_name = name+"02_Peak_Info_Sigma"
ws_table_element.setPV_Names(pv_pos_wf_name,pv_wf_name,sigma_name,WS_DIRECTION_VER)
# The contsants
import sys
import os
import math
import types
import time
import random
from java.lang import *
from xal.extension.widgets.plot import FunctionGraphsJPanel
false = Boolean("false").booleanValue()
true = Boolean("true").booleanValue()
null = None
#default graph panel legend key
GRAPH_LEGEND_KEY = FunctionGraphsJPanel().getLegendKeyString()
class OneGraphPanel:
def __init__(self, title):
self.gpF = FunctionGraphsJPanel()
self.gpF.setLegendButtonVisible(true)
self.gpF.setChooseModeButtonVisible(true)
self.gpF.setName(title)
self.gpF.setAxisNames("time, [sec]", "Value, [arb. units]")
etched_border = BorderFactory.createEtchedBorder()
self.gpF.setBorder(etched_border)
self.gd_arr = []
self.color_arr = [
Color.BLUE, Color.BLACK, Color.RED, Color.GREEN, Color.MAGENTA
]
def clean(self):
self.gpF.removeAllGraphData()
self.gd_arr = []
def addGraph(self, pv_name, time_arr, val_arr):
ind = len(self.gd_arr) % len(self.color_arr)
gd = BasicGraphData()
gd.setGraphProperty("Legend", pv_name)
gd.addPoint(time_arr, val_arr)
gd.setGraphColor(self.color_arr[ind])
self.gpF.addGraphData(gd)
self.gd_arr.append(gd)
def __init__(self,mebt_main_orbit_diff_cntrl):
self.mebt_main_orbit_diff_cntrl = mebt_main_orbit_diff_cntrl
self.setLayout(BorderLayout())
tabbedPane = JTabbedPane()
#----etched border
etched_border = BorderFactory.createEtchedBorder()
#---- plots for Hor-Ver and Longitudinal
self.hor_plot = FunctionGraphsJPanel()
self.hor_plot.setLegendButtonVisible(true)
self.hor_plot.setChooseModeButtonVisible(true)
self.hor_plot.setName("Horizontal Plane (Vert.Lns.: Black:quads Blue:DC Red:Cavs)")
self.hor_plot.setAxisNames("Position, m","X[mm]")
self.hor_plot.setBorder(etched_border)
self.ver_plot = FunctionGraphsJPanel()
self.ver_plot.setLegendButtonVisible(true)
self.ver_plot.setChooseModeButtonVisible(true)
self.ver_plot.setName("Vertical Plane (Vert.Lns.: Black:quads Blue:DC Red:Cavs)")
self.ver_plot.setAxisNames("Position, m","Y[mm]")
self.ver_plot.setBorder(etched_border)
#------------------------------------------------
self.hor_diff_plot = FunctionGraphsJPanel()
self.hor_diff_plot.setLegendButtonVisible(true)
self.hor_diff_plot.setChooseModeButtonVisible(true)
self.hor_diff_plot.setName("Horizontal Plane (Vert.Lns.: Black:quads Blue:DC Red:Cavs)")
self.hor_diff_plot.setAxisNames("Position, m","Diff X[mm]")
self.hor_diff_plot.setBorder(etched_border)
self.ver_diff_plot = FunctionGraphsJPanel()
self.ver_diff_plot.setLegendButtonVisible(true)
self.ver_diff_plot.setChooseModeButtonVisible(true)
self.ver_diff_plot.setName("Vertical Plane (Vert.Lns.: Black:quads Blue:DC Red:Cavs)")
self.ver_diff_plot.setAxisNames("Position, m","Diff Y[mm]")
self.ver_diff_plot.setBorder(etched_border)
#--------------------------------------------------------------------
quad_wrappers = self.mebt_main_orbit_diff_cntrl.quad_wrappers
dc_wrappers = self.mebt_main_orbit_diff_cntrl.dc_wrappers
mebt_cav_wrappers = self.mebt_main_orbit_diff_cntrl.mebt_cav_wrappers
for wrapper in quad_wrappers:
self.hor_plot.addVerticalLine(wrapper.pos,Color.BLACK)
self.ver_plot.addVerticalLine(wrapper.pos,Color.BLACK)
self.hor_diff_plot.addVerticalLine(wrapper.pos,Color.BLACK)
self.ver_diff_plot.addVerticalLine(wrapper.pos,Color.BLACK)
for wrapper in dc_wrappers:
self.hor_plot.addVerticalLine(wrapper.pos,Color.BLUE)
self.ver_plot.addVerticalLine(wrapper.pos,Color.BLUE)
self.hor_diff_plot.addVerticalLine(wrapper.pos,Color.BLUE)
self.ver_diff_plot.addVerticalLine(wrapper.pos,Color.BLUE)
for wrapper in mebt_cav_wrappers:
self.hor_plot.addVerticalLine(wrapper.pos,Color.RED)
self.ver_plot.addVerticalLine(wrapper.pos,Color.RED)
self.hor_diff_plot.addVerticalLine(wrapper.pos,Color.RED)
self.ver_diff_plot.addVerticalLine(wrapper.pos,Color.RED)
#---------------------------------------------------------------------
#--------------------------------------------------
#---- panels
graph_diff_panel = JPanel(GridLayout(2,1))
graph_diff_panel.add(self.hor_diff_plot)
graph_diff_panel.add(self.ver_diff_plot)
#----------------------------------
graph_panel = JPanel(GridLayout(2,1))
graph_panel.add(self.hor_plot)
graph_panel.add(self.ver_plot)
#----------------------------------
tabbedPane.add("Orbit Difference",graph_diff_panel)
tabbedPane.add("Orbit",graph_panel)
#-------------------------------------
self.x_model_gd = BasicGraphData()
self.x_model_gd.setLineThick(3)
self.x_model_gd.setGraphPointSize(7)
self.x_model_gd.setGraphColor(Color.BLUE)
self.x_model_gd.setGraphProperty(GRAPH_LEGEND_KEY,"X Model [mm]")
self.x_model_gd.setDrawLinesOn(true)
self.x_model_gd.setDrawPointsOn(false)
#-------------------------------------
self.y_model_gd = BasicGraphData()
self.y_model_gd.setLineThick(3)
self.y_model_gd.setGraphPointSize(7)
self.y_model_gd.setGraphColor(Color.RED)
self.y_model_gd.setGraphProperty(GRAPH_LEGEND_KEY,"Y Model [mm]")
self.y_model_gd.setDrawLinesOn(true)
self.y_model_gd.setDrawPointsOn(false)
#-------------------------------------
self.x_model_diff_gd = BasicGraphData()
self.x_model_diff_gd.setLineThick(3)
self.x_model_diff_gd.setGraphPointSize(7)
self.x_model_diff_gd.setGraphColor(Color.BLUE)
self.x_model_diff_gd.setGraphProperty(GRAPH_LEGEND_KEY,"X Diff Model [mm]")
self.x_model_diff_gd.setDrawLinesOn(true)
self.x_model_diff_gd.setDrawPointsOn(false)
#-------------------------------------
self.y_model_diff_gd = BasicGraphData()
self.y_model_diff_gd.setLineThick(3)
self.y_model_diff_gd.setGraphPointSize(7)
self.y_model_diff_gd.setGraphColor(Color.RED)
self.y_model_diff_gd.setGraphProperty(GRAPH_LEGEND_KEY,"Y Diff Model [mm]")
self.y_model_diff_gd.setDrawLinesOn(true)
self.y_model_diff_gd.setDrawPointsOn(false)
#-------------------------------------
#-------------------------------------
self.x_bpm_gd = BasicGraphData()
self.x_bpm_gd.setLineThick(3)
self.x_bpm_gd.setGraphPointSize(7)
self.x_bpm_gd.setGraphColor(Color.BLUE)
self.x_bpm_gd.setGraphProperty(GRAPH_LEGEND_KEY,"X BPM [mm]")
self.x_bpm_gd.setDrawLinesOn(false)
self.x_bpm_gd.setDrawPointsOn(true)
#-------------------------------------
self.y_bpm_gd = BasicGraphData()
self.y_bpm_gd.setLineThick(3)
self.y_bpm_gd.setGraphPointSize(7)
self.y_bpm_gd.setGraphColor(Color.RED)
self.y_bpm_gd.setGraphProperty(GRAPH_LEGEND_KEY,"Y BPM [mm]")
self.y_bpm_gd.setDrawLinesOn(false)
self.y_bpm_gd.setDrawPointsOn(true)
#-------------------------------------
self.x_bpm_diff_gd = BasicGraphData()
self.x_bpm_diff_gd.setLineThick(3)
self.x_bpm_diff_gd.setGraphPointSize(7)
self.x_bpm_diff_gd.setGraphColor(Color.BLUE)
self.x_bpm_diff_gd.setGraphProperty(GRAPH_LEGEND_KEY,"X Diff BPM [mm]")
self.x_bpm_diff_gd.setDrawLinesOn(false)
self.x_bpm_diff_gd.setDrawPointsOn(true)
#-------------------------------------
self.y_bpm_diff_gd = BasicGraphData()
self.y_bpm_diff_gd.setLineThick(3)
self.y_bpm_diff_gd.setGraphPointSize(7)
self.y_bpm_diff_gd.setGraphColor(Color.RED)
self.y_bpm_diff_gd.setGraphProperty(GRAPH_LEGEND_KEY,"Y Diff BPM [mm]")
self.y_bpm_diff_gd.setDrawLinesOn(false)
self.y_bpm_diff_gd.setDrawPointsOn(true)
#-------------------------------------
self.index0_button = JRadioButton("Orbit #0")
self.index1_button = JRadioButton("Orbit #1")
self.button_group = ButtonGroup()
self.button_group.add(self.index0_button)
self.button_group.add(self.index1_button)
self.index0_button.setSelected(true)
replot_button = JButton("Replot Graphs")
replot_button.addActionListener(Replot_Button_Listener(self.mebt_main_orbit_diff_cntrl))
button_panel = JPanel(FlowLayout(FlowLayout.LEFT,3,3))
button_panel.add(self.index0_button)
button_panel.add(self.index1_button)
button_panel.add(replot_button)
#-----------------------------------------------
self.add(tabbedPane,BorderLayout.CENTER)
self.add(button_panel,BorderLayout.SOUTH)
class Orbit_Diff_Graphs_Panel(JPanel):
def __init__(self,mebt_main_orbit_diff_cntrl):
self.mebt_main_orbit_diff_cntrl = mebt_main_orbit_diff_cntrl
self.setLayout(BorderLayout())
tabbedPane = JTabbedPane()
#----etched border
etched_border = BorderFactory.createEtchedBorder()
#---- plots for Hor-Ver and Longitudinal
self.hor_plot = FunctionGraphsJPanel()
self.hor_plot.setLegendButtonVisible(true)
self.hor_plot.setChooseModeButtonVisible(true)
self.hor_plot.setName("Horizontal Plane (Vert.Lns.: Black:quads Blue:DC Red:Cavs)")
self.hor_plot.setAxisNames("Position, m","X[mm]")
self.hor_plot.setBorder(etched_border)
self.ver_plot = FunctionGraphsJPanel()
self.ver_plot.setLegendButtonVisible(true)
self.ver_plot.setChooseModeButtonVisible(true)
self.ver_plot.setName("Vertical Plane (Vert.Lns.: Black:quads Blue:DC Red:Cavs)")
self.ver_plot.setAxisNames("Position, m","Y[mm]")
self.ver_plot.setBorder(etched_border)
#------------------------------------------------
self.hor_diff_plot = FunctionGraphsJPanel()
self.hor_diff_plot.setLegendButtonVisible(true)
self.hor_diff_plot.setChooseModeButtonVisible(true)
self.hor_diff_plot.setName("Horizontal Plane (Vert.Lns.: Black:quads Blue:DC Red:Cavs)")
self.hor_diff_plot.setAxisNames("Position, m","Diff X[mm]")
self.hor_diff_plot.setBorder(etched_border)
self.ver_diff_plot = FunctionGraphsJPanel()
self.ver_diff_plot.setLegendButtonVisible(true)
self.ver_diff_plot.setChooseModeButtonVisible(true)
self.ver_diff_plot.setName("Vertical Plane (Vert.Lns.: Black:quads Blue:DC Red:Cavs)")
self.ver_diff_plot.setAxisNames("Position, m","Diff Y[mm]")
self.ver_diff_plot.setBorder(etched_border)
#--------------------------------------------------------------------
quad_wrappers = self.mebt_main_orbit_diff_cntrl.quad_wrappers
dc_wrappers = self.mebt_main_orbit_diff_cntrl.dc_wrappers
mebt_cav_wrappers = self.mebt_main_orbit_diff_cntrl.mebt_cav_wrappers
for wrapper in quad_wrappers:
self.hor_plot.addVerticalLine(wrapper.pos,Color.BLACK)
self.ver_plot.addVerticalLine(wrapper.pos,Color.BLACK)
self.hor_diff_plot.addVerticalLine(wrapper.pos,Color.BLACK)
self.ver_diff_plot.addVerticalLine(wrapper.pos,Color.BLACK)
for wrapper in dc_wrappers:
self.hor_plot.addVerticalLine(wrapper.pos,Color.BLUE)
self.ver_plot.addVerticalLine(wrapper.pos,Color.BLUE)
self.hor_diff_plot.addVerticalLine(wrapper.pos,Color.BLUE)
self.ver_diff_plot.addVerticalLine(wrapper.pos,Color.BLUE)
for wrapper in mebt_cav_wrappers:
self.hor_plot.addVerticalLine(wrapper.pos,Color.RED)
self.ver_plot.addVerticalLine(wrapper.pos,Color.RED)
self.hor_diff_plot.addVerticalLine(wrapper.pos,Color.RED)
self.ver_diff_plot.addVerticalLine(wrapper.pos,Color.RED)
#---------------------------------------------------------------------
#--------------------------------------------------
#---- panels
graph_diff_panel = JPanel(GridLayout(2,1))
graph_diff_panel.add(self.hor_diff_plot)
graph_diff_panel.add(self.ver_diff_plot)
#----------------------------------
graph_panel = JPanel(GridLayout(2,1))
graph_panel.add(self.hor_plot)
graph_panel.add(self.ver_plot)
#----------------------------------
tabbedPane.add("Orbit Difference",graph_diff_panel)
tabbedPane.add("Orbit",graph_panel)
#-------------------------------------
self.x_model_gd = BasicGraphData()
self.x_model_gd.setLineThick(3)
self.x_model_gd.setGraphPointSize(7)
self.x_model_gd.setGraphColor(Color.BLUE)
self.x_model_gd.setGraphProperty(GRAPH_LEGEND_KEY,"X Model [mm]")
self.x_model_gd.setDrawLinesOn(true)
self.x_model_gd.setDrawPointsOn(false)
#-------------------------------------
self.y_model_gd = BasicGraphData()
self.y_model_gd.setLineThick(3)
self.y_model_gd.setGraphPointSize(7)
self.y_model_gd.setGraphColor(Color.RED)
self.y_model_gd.setGraphProperty(GRAPH_LEGEND_KEY,"Y Model [mm]")
self.y_model_gd.setDrawLinesOn(true)
self.y_model_gd.setDrawPointsOn(false)
#-------------------------------------
self.x_model_diff_gd = BasicGraphData()
self.x_model_diff_gd.setLineThick(3)
self.x_model_diff_gd.setGraphPointSize(7)
self.x_model_diff_gd.setGraphColor(Color.BLUE)
self.x_model_diff_gd.setGraphProperty(GRAPH_LEGEND_KEY,"X Diff Model [mm]")
self.x_model_diff_gd.setDrawLinesOn(true)
self.x_model_diff_gd.setDrawPointsOn(false)
#-------------------------------------
self.y_model_diff_gd = BasicGraphData()
self.y_model_diff_gd.setLineThick(3)
self.y_model_diff_gd.setGraphPointSize(7)
self.y_model_diff_gd.setGraphColor(Color.RED)
self.y_model_diff_gd.setGraphProperty(GRAPH_LEGEND_KEY,"Y Diff Model [mm]")
self.y_model_diff_gd.setDrawLinesOn(true)
self.y_model_diff_gd.setDrawPointsOn(false)
#-------------------------------------
#-------------------------------------
self.x_bpm_gd = BasicGraphData()
self.x_bpm_gd.setLineThick(3)
self.x_bpm_gd.setGraphPointSize(7)
self.x_bpm_gd.setGraphColor(Color.BLUE)
self.x_bpm_gd.setGraphProperty(GRAPH_LEGEND_KEY,"X BPM [mm]")
self.x_bpm_gd.setDrawLinesOn(false)
self.x_bpm_gd.setDrawPointsOn(true)
#-------------------------------------
self.y_bpm_gd = BasicGraphData()
self.y_bpm_gd.setLineThick(3)
self.y_bpm_gd.setGraphPointSize(7)
self.y_bpm_gd.setGraphColor(Color.RED)
self.y_bpm_gd.setGraphProperty(GRAPH_LEGEND_KEY,"Y BPM [mm]")
self.y_bpm_gd.setDrawLinesOn(false)
self.y_bpm_gd.setDrawPointsOn(true)
#-------------------------------------
self.x_bpm_diff_gd = BasicGraphData()
self.x_bpm_diff_gd.setLineThick(3)
self.x_bpm_diff_gd.setGraphPointSize(7)
self.x_bpm_diff_gd.setGraphColor(Color.BLUE)
self.x_bpm_diff_gd.setGraphProperty(GRAPH_LEGEND_KEY,"X Diff BPM [mm]")
self.x_bpm_diff_gd.setDrawLinesOn(false)
self.x_bpm_diff_gd.setDrawPointsOn(true)
#-------------------------------------
self.y_bpm_diff_gd = BasicGraphData()
self.y_bpm_diff_gd.setLineThick(3)
self.y_bpm_diff_gd.setGraphPointSize(7)
self.y_bpm_diff_gd.setGraphColor(Color.RED)
self.y_bpm_diff_gd.setGraphProperty(GRAPH_LEGEND_KEY,"Y Diff BPM [mm]")
self.y_bpm_diff_gd.setDrawLinesOn(false)
self.y_bpm_diff_gd.setDrawPointsOn(true)
#-------------------------------------
self.index0_button = JRadioButton("Orbit #0")
self.index1_button = JRadioButton("Orbit #1")
self.button_group = ButtonGroup()
self.button_group.add(self.index0_button)
self.button_group.add(self.index1_button)
self.index0_button.setSelected(true)
replot_button = JButton("Replot Graphs")
replot_button.addActionListener(Replot_Button_Listener(self.mebt_main_orbit_diff_cntrl))
button_panel = JPanel(FlowLayout(FlowLayout.LEFT,3,3))
button_panel.add(self.index0_button)
button_panel.add(self.index1_button)
button_panel.add(replot_button)
#-----------------------------------------------
self.add(tabbedPane,BorderLayout.CENTER)
self.add(button_panel,BorderLayout.SOUTH)
def removeAllGraphData(self):
self.hor_plot.removeAllGraphData()
self.ver_plot.removeAllGraphData()
self.hor_diff_plot.removeAllGraphData()
self.ver_diff_plot.removeAllGraphData()
#--------------------------------------
self.x_model_gd.removeAllPoints()
self.y_model_gd.removeAllPoints()
self.x_model_diff_gd.removeAllPoints()
self.y_model_diff_gd.removeAllPoints()
#--------------------------------------
self.x_bpm_gd.removeAllPoints()
self.y_bpm_gd.removeAllPoints()
self.x_bpm_diff_gd.removeAllPoints()
self.y_bpm_diff_gd.removeAllPoints()
def updateGraphData(self):
self.removeAllGraphData()
orb_index = 0
if(self.index1_button.isSelected()):
orb_index = 1
#print "debug orb_index=",orb_index
#==== update graph data from calculator and measurer
orbit_measurer = self.mebt_main_orbit_diff_cntrl.orbit_measurer
mebt_orbit_holder_0 = orbit_measurer.mebt_orbit_holder_0
mebt_orbit_holder_1 = orbit_measurer.mebt_orbit_holder_1
bpm_orbit_holder_0 = orbit_measurer.bpm_orbit_holder_0
bpm_orbit_holder_1 = orbit_measurer.bpm_orbit_holder_1
bpm_wrappers = self.mebt_main_orbit_diff_cntrl.bpm_wrappers
max_pos = 0.
for bpm_wrapper in bpm_wrappers:
if(bpm_wrapper.use):
if(max_pos < bpm_wrapper.pos):
max_pos = bpm_wrapper.pos
#----------------------------------------
pos_step = 0.1
pos_old = -1.
traj0 = mebt_orbit_holder_0.getTrajectory()
traj1 = mebt_orbit_holder_1.getTrajectory()
for ind in range(traj0.numStates()):
state0 = traj0.stateWithIndex(ind)
pos = state0.getPosition()
state1 = traj1.stateNearestPosition(pos)
if(pos > (pos_old + pos_step) and pos_old < max_pos):
x0 = state0.getPhaseCoordinates().getx()*1000.
y0 = state0.getPhaseCoordinates().gety()*1000.
x1 = state1.getPhaseCoordinates().getx()*1000.
y1 = state1.getPhaseCoordinates().gety()*1000.
pos_old = pos
if(orb_index == 0):
self.x_model_gd.addPoint(pos,x0)
self.y_model_gd.addPoint(pos,y0)
else:
self.x_model_gd.addPoint(pos,x1)
self.y_model_gd.addPoint(pos,y1)
self.x_model_diff_gd.addPoint(pos,x1-x0)
self.y_model_diff_gd.addPoint(pos,y1-y0)
#----------------------------------------------
#bpm_orbit_holder_0.calcStatistics()
#bpm_orbit_holder_1.calcStatistics()
for bpm_wrapper in bpm_wrappers:
if(bpm_wrapper.use):
(x0,x0_err,y0,y0_err) = bpm_orbit_holder_0.getXY_and_Err(bpm_wrapper)
(x1,x1_err,y1,y1_err) = bpm_orbit_holder_1.getXY_and_Err(bpm_wrapper)
if(orb_index == 0):
self.x_bpm_gd.addPoint(bpm_wrapper.pos,x0,x0_err)
self.y_bpm_gd.addPoint(bpm_wrapper.pos,y0,y0_err)
else:
self.x_bpm_gd.addPoint(bpm_wrapper.pos,x1,x1_err)
self.y_bpm_gd.addPoint(bpm_wrapper.pos,y1,y1_err)
self.x_bpm_diff_gd.addPoint(bpm_wrapper.pos,x1-x0,math.sqrt(x0_err**2+x1_err**2))
self.y_bpm_diff_gd.addPoint(bpm_wrapper.pos,y1-y0,math.sqrt(y0_err**2+y1_err**2))
#-------------------------------------
self.hor_plot.addGraphData(self.x_model_gd)
self.hor_plot.addGraphData(self.x_bpm_gd)
self.ver_plot.addGraphData(self.y_model_gd)
self.ver_plot.addGraphData(self.y_bpm_gd)
#-------------------------------------
self.hor_diff_plot.addGraphData(self.x_model_diff_gd)
self.hor_diff_plot.addGraphData(self.x_bpm_diff_gd)
self.ver_diff_plot.addGraphData(self.y_model_diff_gd)
self.ver_diff_plot.addGraphData(self.y_bpm_diff_gd)
def __init__(self,linac_wizard_document):
#--- linac_wizard_document the parent document for all controllers
self.linac_wizard_document = linac_wizard_document
self.main_panel = JPanel(GridLayout(2,1))
self.quadFieldDict = {}
self.cavAmpPhaseDict = {}
self.quads = []
self.cavs = []
self.ws_table_model = WS_Table_Model()
#----make LW or WS nodes
self.ws_nodes = []
#----etched border
etched_border = BorderFactory.createEtchedBorder()
#---make the WS_JTable + H&V Graphs Panels
self.ws_table = JTable(self.ws_table_model)
self.ws_table.setSelectionMode(ListSelectionModel.SINGLE_SELECTION)
self.ws_table.setFillsViewportHeight(true)
ws_panel = JPanel(BorderLayout())
ws_panel.add(JScrollPane(self.ws_table), BorderLayout.CENTER)
ws_knobs_panel = JPanel(FlowLayout(FlowLayout.CENTER,5,5))
ws_panel.add(ws_knobs_panel, BorderLayout.SOUTH)
ws_panel.setBorder(etched_border)
#---ws knobs ---------------------------------------------
get_ws_data_button = JButton("Get WS/LW Data")
switch_hv_button = JButton(" Switch H/V ")
add_data_to_pool_button = JButton(" Add Data to Pool ")
ws_knobs_panel.add(get_ws_data_button)
ws_knobs_panel.add(switch_hv_button)
ws_knobs_panel.add(add_data_to_pool_button)
get_ws_data_button.addActionListener(WS_GET_Data_Listener(self))
switch_hv_button.addActionListener(Switch_HV_Listener(self))
add_data_to_pool_button.addActionListener(WS_Data_to_Pool_Listener(self))
#---------------------------------------------------------
ws_and_graphs_panel = JPanel(BorderLayout())
border = BorderFactory.createTitledBorder(etched_border,"WS/LW Raw Data Acquisition")
ws_and_graphs_panel.setBorder(border)
ws_and_graphs_panel.add(ws_panel, BorderLayout.WEST)
graphs_panel = JPanel(GridLayout(1,2))
self.gpanel_horWF = FunctionGraphsJPanel()
self.gpanel_verWF = FunctionGraphsJPanel()
self.gpanel_horWF.setLegendButtonVisible(true)
self.gpanel_horWF.setChooseModeButtonVisible(true)
self.gpanel_verWF.setLegendButtonVisible(true)
self.gpanel_verWF.setChooseModeButtonVisible(true)
self.gpanel_horWF.setName("Horizontal Profiles")
self.gpanel_horWF.setAxisNames("pos, [mm]","Amp, [arb. units]")
self.gpanel_verWF.setName("Vertical Profiles")
self.gpanel_verWF.setAxisNames("pos, [mm]","Amp, [arb. units]")
self.gpanel_horWF.setBorder(etched_border)
self.gpanel_verWF.setBorder(etched_border)
graphs_panel.add(self.gpanel_horWF)
graphs_panel.add(self.gpanel_verWF)
ws_and_graphs_panel.add(graphs_panel, BorderLayout.CENTER)
self.setDataToGraphPanels(-1)
#------analysis sub-panel
self.ws_data_analysis_controller = WS_Data_Analysis_Controller(self)
#---put everything into the main_panel
self.main_panel.add(ws_and_graphs_panel)
self.main_panel.add(self.ws_data_analysis_controller.main_panel)
#---set up Listeners
self.ws_table.getSelectionModel().addListSelectionListener(WS_Table_Selection_Listener(self))
def __init__(self,ws_lw_acquisition_controller):
self.ws_lw_acquisition_controller = ws_lw_acquisition_controller
self.local_gauss_fitter = Local_Gauss_Fitter()
self.main_panel = JPanel(BorderLayout())
self.ws_records_table_model = WS_Records_Table_Model()
#----etched border
etched_border = BorderFactory.createEtchedBorder()
#---make the WS_Records_JTable + Graph Panel
self.records_table = JTable(self.ws_records_table_model)
self.records_table.setSelectionMode(ListSelectionModel.SINGLE_SELECTION)
self.records_table.setFillsViewportHeight(true)
#----set up records_table columns width
columnModel = self.records_table.getColumnModel()
columnModel.getColumn(0).setPreferredWidth(30)
columnModel.getColumn(1).setPreferredWidth(160)
columnModel.getColumn(2).setPreferredWidth(40)
columnModel.getColumn(3).setPreferredWidth(40)
columnModel.getColumn(4).setPreferredWidth(80)
columnModel.getColumn(5).setPreferredWidth(70)
columnModel.getColumn(6).setPreferredWidth(70)
#---------------------------------------------------
records_panel = JPanel(BorderLayout())
records_panel.add(JScrollPane(self.records_table), BorderLayout.CENTER)
knobs_gauss_panel = JPanel(BorderLayout())
records_panel.add(knobs_gauss_panel, BorderLayout.SOUTH)
records_panel.setBorder(etched_border)
#---records knobs ---------------------------------------------
records_knobs_panel = JPanel(FlowLayout(FlowLayout.CENTER,5,5))
guess_and_fit_button = JButton("Guess and Fit")
analysis_all_button = JButton("G&F All")
fit_button = JButton("Fit")
fit_all_button = JButton("Fit All")
send_to_twiss_button = JButton("Send to Twiss Analysis")
records_knobs_panel.add(guess_and_fit_button)
records_knobs_panel.add(analysis_all_button)
records_knobs_panel.add(fit_button)
records_knobs_panel.add(fit_all_button)
records_knobs_panel.add(send_to_twiss_button)
guess_and_fit_button.addActionListener(Guess_And_Fit_Listener(self.ws_lw_acquisition_controller))
fit_button.addActionListener(Fit_Listener(self.ws_lw_acquisition_controller))
fit_all_button.addActionListener(Fit_All_Listener(self.ws_lw_acquisition_controller))
analysis_all_button.addActionListener(Guess_And_Fit_All_Listener(self.ws_lw_acquisition_controller))
send_to_twiss_button.addActionListener(SendToAnalysis_Listener(self.ws_lw_acquisition_controller))
self.gauss_fit_param_panel = GaussFitDataPanel()
knobs_gauss_panel.add(records_knobs_panel, BorderLayout.NORTH)
knobs_gauss_panel.add(self.gauss_fit_param_panel, BorderLayout.SOUTH)
#---------------------------------------------------------
self.record_analysis_panel = JPanel(BorderLayout())
border = BorderFactory.createTitledBorder(etched_border,"WS/LW Wave Form Analysis")
self.record_analysis_panel.setBorder(border)
self.record_analysis_panel.add(records_panel, BorderLayout.WEST)
self.gpanel_WF = FunctionGraphsJPanel()
self.gpanel_WF.setLegendButtonVisible(true)
self.gpanel_WF.setChooseModeButtonVisible(true)
self.gpanel_WF.setName("Profile")
self.gpanel_WF.setAxisNames("pos, [mm]","Amp, [arb. units]")
self.gpanel_WF.setBorder(etched_border)
self.gpanel_WF.addVerticalLine(-1.0e+30,Color.red)
self.gpanel_WF.addVerticalLine(+1.0e+30,Color.red)
self.gpanel_WF.setVerLinesButtonVisible(true)
self.gpanel_WF.addDraggedVerLinesListener(Position_Limits_Listener(self.ws_lw_acquisition_controller))
write_waveforms_to_ascii_button = JButton("Write Waveforms to ASCII File")
write_waveforms_to_ascii_button.addActionListener(Write_Waveforms_to_ASCII_Listener(self.ws_lw_acquisition_controller))
below_graph_panel = JPanel(FlowLayout(FlowLayout.LEFT,5,5))
below_graph_panel.add(write_waveforms_to_ascii_button)
graph_panel_left = JPanel(BorderLayout())
graph_panel_left.add(self.gpanel_WF, BorderLayout.CENTER)
graph_panel_left.add(below_graph_panel, BorderLayout.SOUTH)
self.record_analysis_panel.add(graph_panel_left, BorderLayout.CENTER)
self.main_panel.add(self.record_analysis_panel, BorderLayout.CENTER)
#---set up Listeners
self.records_table.getSelectionModel().addListSelectionListener(WS_Record_Table_Selection_Listener(self.ws_lw_acquisition_controller))
def __init__(self,linac_wizard_document):
#--- linac_wizard_document the parent document for all controllers
self.linac_wizard_document = linac_wizard_document
self.main_panel = JPanel(GridLayout(2,1))
self.quadFieldDict = {}
self.cavAmpPhaseDict = {}
self.quads = []
self.cavs = []
self.ws_table_model = WS_Table_Model()
#----make LW or WS nodes
self.ws_nodes = []
#----etched border
etched_border = BorderFactory.createEtchedBorder()
#---make the WS_JTable + H&V Graphs Panels
self.ws_table = JTable(self.ws_table_model)
self.ws_table.setSelectionMode(ListSelectionModel.SINGLE_SELECTION)
self.ws_table.setFillsViewportHeight(true)
ws_panel = JPanel(BorderLayout())
ws_panel.add(JScrollPane(self.ws_table), BorderLayout.CENTER)
ws_knobs_panel = JPanel(FlowLayout(FlowLayout.CENTER,5,5))
ws_panel.add(ws_knobs_panel, BorderLayout.SOUTH)
ws_panel.setBorder(etched_border)
#---ws knobs ---------------------------------------------
get_ws_data_button = JButton("Get WS/LW Data")
switch_hv_button = JButton(" Switch H/V ")
add_data_to_pool_button = JButton(" Add Data to Pool ")
ws_knobs_panel.add(get_ws_data_button)
ws_knobs_panel.add(switch_hv_button)
ws_knobs_panel.add(add_data_to_pool_button)
get_ws_data_button.addActionListener(WS_GET_Data_Listener(self))
switch_hv_button.addActionListener(Switch_HV_Listener(self))
add_data_to_pool_button.addActionListener(WS_Data_to_Pool_Listener(self))
#---------------------------------------------------------
ws_and_graphs_panel = JPanel(BorderLayout())
border = BorderFactory.createTitledBorder(etched_border,"WS/LW Raw Data Acquisition")
ws_and_graphs_panel.setBorder(border)
ws_and_graphs_panel.add(ws_panel, BorderLayout.WEST)
graphs_panel = JPanel(GridLayout(1,2))
self.gpanel_horWF = FunctionGraphsJPanel()
self.gpanel_verWF = FunctionGraphsJPanel()
self.gpanel_horWF.setLegendButtonVisible(true)
self.gpanel_horWF.setChooseModeButtonVisible(true)
self.gpanel_verWF.setLegendButtonVisible(true)
self.gpanel_verWF.setChooseModeButtonVisible(true)
self.gpanel_horWF.setName("Horizontal Profiles")
self.gpanel_horWF.setAxisNames("pos, [mm]","Amp, [arb. units]")
self.gpanel_verWF.setName("Vertical Profiles")
self.gpanel_verWF.setAxisNames("pos, [mm]","Amp, [arb. units]")
self.gpanel_horWF.setBorder(etched_border)
self.gpanel_verWF.setBorder(etched_border)
graphs_panel.add(self.gpanel_horWF)
graphs_panel.add(self.gpanel_verWF)
ws_and_graphs_panel.add(graphs_panel, BorderLayout.CENTER)
self.setDataToGraphPanels(-1)
#------analysis sub-panel
self.ws_data_analysis_controller = WS_Data_Analysis_Controller(self)
#---put everything into the main_panel
self.main_panel.add(ws_and_graphs_panel)
self.main_panel.add(self.ws_data_analysis_controller.main_panel)
#---set up Listeners
self.ws_table.getSelectionModel().addListSelectionListener(WS_Table_Selection_Listener(self))
class OneGraphPanel:
def __init__(self, title):
self.gpF = FunctionGraphsJPanel()
self.gpF.setLegendButtonVisible(true)
self.gpF.setChooseModeButtonVisible(true)
self.gpF.setName(title)
self.gpF.setAxisNames("time, [sec]","Value, [arb. units]")
etched_border = BorderFactory.createEtchedBorder()
self.gpF.setBorder(etched_border)
self.gd_arr = []
self.color_arr = [Color.BLUE,Color.BLACK,Color.RED,Color.GREEN,Color.MAGENTA]
def clean(self):
self.gpF.removeAllGraphData()
self.gd_arr = []
def addGraph(self,pv_name,time_arr,val_arr):
ind = len(self.gd_arr)%len(self.color_arr)
gd = BasicGraphData()
gd.setGraphProperty("Legend",pv_name)
gd.addPoint(time_arr,val_arr)
gd.setGraphColor(self.color_arr[ind])
self.gpF.addGraphData(gd)
self.gd_arr.append(gd)
class BPMs_Amp_Phase_Graphs_Panel(JPanel):
def __init__(self,scl_long_tuneup_controller):
self.scl_long_tuneup_controller = scl_long_tuneup_controller
self.setLayout(GridLayout(2,1))
#----etched border
etched_border = BorderFactory.createEtchedBorder()
self.setBorder(etched_border)
self.gp_bpm_phases = FunctionGraphsJPanel()
self.gp_bpm_amps = FunctionGraphsJPanel()
self.gp_bpm_phases.setLegendButtonVisible(true)
self.gp_bpm_phases.setChooseModeButtonVisible(true)
self.gp_bpm_amps.setLegendButtonVisible(true)
self.gp_bpm_amps.setChooseModeButtonVisible(true)
self.gp_bpm_phases.setName("BPM Phases")
self.gp_bpm_phases.setAxisNames("Cav Phase, [deg]","BPM Phase, [deg]")
self.gp_bpm_amps.setName("BPM Amplitude")
self.gp_bpm_amps.setAxisNames("Cav Phase, [deg]","Amplitude, a.u.")
self.gp_bpm_phases.setBorder(etched_border)
self.gp_bpm_amps.setBorder(etched_border)
self.add(self.gp_bpm_phases)
self.add(self.gp_bpm_amps)
def removeAllGraphData(self):
self.gp_bpm_phases.removeAllGraphData()
self.gp_bpm_amps.removeAllGraphData()
def updateGraphData(self):
self.gp_bpm_phases.removeAllGraphData()
self.gp_bpm_amps.removeAllGraphData()
scl_long_tuneup_phase_scan_controller = self.scl_long_tuneup_controller.scl_long_tuneup_phase_scan_controller
bpms_table = scl_long_tuneup_phase_scan_controller.bpms_table
bpms_table_model = scl_long_tuneup_phase_scan_controller.bpms_table_model
bpm_wrappers = bpms_table_model.bpm_wrappers
bpm_selected_inds = bpms_table.getSelectedRows()
if(len(bpm_selected_inds) == 0 or bpm_selected_inds[0] < 0):
return
cav_wrapper = bpms_table_model.cav_wrapper
if(cav_wrapper == null or not cav_wrapper.isGood): return
for ind in bpm_selected_inds:
bpm_wrapper = bpm_wrappers[ind]
(graphDataAmp,graphDataPhase) = cav_wrapper.getAmpPhaseGraphs(bpm_wrapper)
if(graphDataAmp != null):
self.gp_bpm_amps.addGraphData(graphDataAmp)
if(graphDataPhase != null):
self.gp_bpm_phases.addGraphData(graphDataPhase)
def __init__(self,ws_lw_acquisition_controller):
self.ws_lw_acquisition_controller = ws_lw_acquisition_controller
self.local_gauss_fitter = Local_Gauss_Fitter()
self.main_panel = JPanel(BorderLayout())
self.ws_records_table_model = WS_Records_Table_Model()
#----etched border
etched_border = BorderFactory.createEtchedBorder()
#---make the WS_Records_JTable + Graph Panel
self.records_table = JTable(self.ws_records_table_model)
self.records_table.setSelectionMode(ListSelectionModel.SINGLE_SELECTION)
self.records_table.setFillsViewportHeight(true)
#----set up records_table columns width
columnModel = self.records_table.getColumnModel()
columnModel.getColumn(0).setPreferredWidth(30)
columnModel.getColumn(1).setPreferredWidth(160)
columnModel.getColumn(2).setPreferredWidth(40)
columnModel.getColumn(3).setPreferredWidth(40)
columnModel.getColumn(4).setPreferredWidth(80)
columnModel.getColumn(5).setPreferredWidth(70)
columnModel.getColumn(6).setPreferredWidth(70)
#---------------------------------------------------
records_panel = JPanel(BorderLayout())
records_panel.add(JScrollPane(self.records_table), BorderLayout.CENTER)
knobs_gauss_panel = JPanel(BorderLayout())
records_panel.add(knobs_gauss_panel, BorderLayout.SOUTH)
records_panel.setBorder(etched_border)
#---records knobs ---------------------------------------------
records_knobs_panel = JPanel(FlowLayout(FlowLayout.CENTER,5,5))
guess_and_fit_button = JButton("Guess and Fit")
analysis_all_button = JButton("G&F All")
fit_button = JButton("Fit")
fit_all_button = JButton("Fit All")
send_to_twiss_button = JButton("Send to Twiss Analysis")
records_knobs_panel.add(guess_and_fit_button)
records_knobs_panel.add(analysis_all_button)
records_knobs_panel.add(fit_button)
records_knobs_panel.add(fit_all_button)
records_knobs_panel.add(send_to_twiss_button)
guess_and_fit_button.addActionListener(Guess_And_Fit_Listener(self.ws_lw_acquisition_controller))
fit_button.addActionListener(Fit_Listener(self.ws_lw_acquisition_controller))
fit_all_button.addActionListener(Fit_All_Listener(self.ws_lw_acquisition_controller))
analysis_all_button.addActionListener(Guess_And_Fit_All_Listener(self.ws_lw_acquisition_controller))
send_to_twiss_button.addActionListener(SendToAnalysis_Listener(self.ws_lw_acquisition_controller))
self.gauss_fit_param_panel = GaussFitDataPanel()
knobs_gauss_panel.add(records_knobs_panel, BorderLayout.NORTH)
knobs_gauss_panel.add(self.gauss_fit_param_panel, BorderLayout.SOUTH)
#---------------------------------------------------------
self.record_analysis_panel = JPanel(BorderLayout())
border = BorderFactory.createTitledBorder(etched_border,"WS/LW Wave Form Analysis")
self.record_analysis_panel.setBorder(border)
self.record_analysis_panel.add(records_panel, BorderLayout.WEST)
self.gpanel_WF = FunctionGraphsJPanel()
self.gpanel_WF.setLegendButtonVisible(true)
self.gpanel_WF.setChooseModeButtonVisible(true)
self.gpanel_WF.setName("Profile")
self.gpanel_WF.setAxisNames("pos, [mm]","Amp, [arb. units]")
self.gpanel_WF.setBorder(etched_border)
self.gpanel_WF.addVerticalLine(-1.0e+30,Color.red)
self.gpanel_WF.addVerticalLine(+1.0e+30,Color.red)
self.gpanel_WF.setVerLinesButtonVisible(true)
self.gpanel_WF.addDraggedVerLinesListener(Position_Limits_Listener(self.ws_lw_acquisition_controller))
self.record_analysis_panel.add(self.gpanel_WF, BorderLayout.CENTER)
self.main_panel.add(self.record_analysis_panel, BorderLayout.CENTER)
#---set up Listeners
self.records_table.getSelectionModel().addListSelectionListener(WS_Record_Table_Selection_Listener(self.ws_lw_acquisition_controller))
class Bad_BPMs_Amp_Phase_Graphs_Panel(JPanel):
def __init__(self, scl_scan_data_cleanup_controller):
self.scl_scan_data_cleanup_controller = scl_scan_data_cleanup_controller
self.setLayout(GridLayout(2, 1))
#----etched border
etched_border = BorderFactory.createEtchedBorder()
self.setBorder(etched_border)
self.gp_bpm_phases = FunctionGraphsJPanel()
self.gp_bpm_amps = FunctionGraphsJPanel()
self.gp_bpm_phases.setLegendButtonVisible(true)
self.gp_bpm_phases.setChooseModeButtonVisible(true)
self.gp_bpm_amps.setLegendButtonVisible(true)
self.gp_bpm_amps.setChooseModeButtonVisible(true)
self.gp_bpm_phases.setName("BPM Phases")
self.gp_bpm_phases.setAxisNames("Cav Phase, [deg]", "BPM Phase, [deg]")
self.gp_bpm_amps.setName("BPM Amplitude")
self.gp_bpm_amps.setAxisNames("Cav Phase, [deg]", "Amplitude, a.u.")
self.gp_bpm_phases.setBorder(etched_border)
self.gp_bpm_amps.setBorder(etched_border)
self.add(self.gp_bpm_phases)
self.add(self.gp_bpm_amps)
def removeAllGraphData(self):
self.gp_bpm_phases.removeAllGraphData()
self.gp_bpm_amps.removeAllGraphData()
def updateGraphData(self):
self.gp_bpm_phases.removeAllGraphData()
self.gp_bpm_amps.removeAllGraphData()
bpms_table = self.scl_scan_data_cleanup_controller.bpms_table
cavs_table = self.scl_scan_data_cleanup_controller.cavs_table
bpm_wrappers = self.scl_scan_data_cleanup_controller.bpms_arr
cav_wrappers = self.scl_scan_data_cleanup_controller.cavs_with_bad_data_arr
bpm_selected_ind = bpms_table.getSelectedRow()
cav_selected_ind = cavs_table.getSelectedRow()
if (bpm_selected_ind >= 0 and cav_selected_ind >= 0):
bpm_wrapper = bpm_wrappers[bpm_selected_ind]
cav_wrapper = cav_wrappers[cav_selected_ind]
(graphDataAmp,
graphDataPhase) = cav_wrapper.getAmpPhaseGraphs(bpm_wrapper)
if (graphDataAmp != null):
self.gp_bpm_amps.addGraphData(graphDataAmp)
if (graphDataPhase != null):
self.gp_bpm_phases.addGraphData(graphDataPhase)
