def OnConnectBtnButton(self, event):
srcOK = self.checkSrcBox()
dstOK = self.checkDstBox()
if not srcOK or not dstOK:
return
else:
srcSel = self.srcBox.GetSelection()
dstSel = self.dstBox.GetSelection()
# both the source and destination boxes have ports selected
srcP = self.srcBox.GetPyData(srcSel)
dstP = self.dstBox.GetPyData(dstSel)
dstC = self.dstBox.GetPyData(self.dstBox.GetItemParent(dstSel))
if (srcP.type == 'Uses' and dstP.type == 'Uses') or \
(srcP.type == 'Provides' and dstP.type == 'Provides'):
errorMsg(self,"Ports cannot be of same type")
return
newCon = ComponentClass.Connection(srcP,dstP,dstC)
tmpflag,tmpcomp = self.checkConnection(newCon)
if tmpflag == True:
self.active_comp.connections.append(newCon)
self.displayConnections()
else:
errorMsg(self,"A duplicate connection exists on <"+tmpcomp+">.")
event.Skip()
def ComponentSave(self,saveasFlag):
if saveasFlag == True or self.saveComponentPath == None:
tempLn = self.compNameBox.GetLineText(0)
if tempLn == '':
errorMsg(self,'Please enter a component name first')
return
self.active_comp.name = tempLn
tempDescr = self.compDescrBox.GetLineText(0)
if tempDescr == '':
errorMsg(self,'Please enter a component description first')
return
self.active_comp.description = tempDescr
if len(self.homeDir) > 0:
tmpdir = self.homeDir
else:
tmpdir = os.path.expanduser("~")
if tmpdir == "~":
tmpdir = "/home"
dlg = wx.FileDialog(self, "Choose a file", tmpdir, tempLn + '.cmp', "Component File (*.cmp)|*.cmp", wx.SAVE)
try:
returnCode = dlg.ShowModal()
if returnCode == wx.ID_OK:
self.saveComponentPath = dlg.GetPath()
elif returnCode == wx.ID_CANCEL:
dlg.Destroy()
return
finally:
dlg.Destroy()
f = open(self.saveComponentPath,'w')
cPickle.dump(('component',self.active_comp),f)
def displayPlatformInfo(self):
if self.parent == None:
return
self.deviceChoice.Clear()
self.nodeChoice.Clear()
for x in self.parent.active_plat.nodes:
self.nodeChoice.Append(x.name,x)
tmpNode = None
if self.active_comp.device != None:
for x in self.parent.active_plat.nodes:
for d in x.Devices:
if d == self.active_comp.device:
tmpNode = x
if tmpNode != None:
pos = self.nodeChoice.FindString(tmpNode.name)
self.nodeChoice.SetSelection(pos)
for d in tmpNode.Devices:
self.deviceChoice.Append(d.name,d)
pos = self.deviceChoice.FindString(self.active_comp.device.name)
self.deviceChoice.SetSelection(pos)
else:
tmpstr = 'ERROR! Cannot find the ' + self.active_comp.device.name
tmpstr += ' device in current Platform configuration.'
tmpstr += '\nSetting device assignment to None.'
errorMsg(self,tmpstr)
self.active_comp.device = None
def ComponentSave(self, saveasFlag):
if saveasFlag == True or self.saveComponentPath == None:
tempLn = self.compNameBox.GetLineText(0)
if tempLn == '':
errorMsg(self, 'Please enter a component name first')
return
self.active_comp.name = tempLn
tempDescr = self.compDescrBox.GetLineText(0)
if tempDescr == '':
errorMsg(self, 'Please enter a component description first')
return
self.active_comp.description = tempDescr
if len(self.homeDir) > 0:
tmpdir = self.homeDir
else:
tmpdir = os.path.expanduser("~")
if tmpdir == "~":
tmpdir = "/home"
dlg = wx.FileDialog(self, "Choose a file", tmpdir, tempLn + '.cmp',
"Component File (*.cmp)|*.cmp", wx.SAVE)
try:
returnCode = dlg.ShowModal()
if returnCode == wx.ID_OK:
self.saveComponentPath = dlg.GetPath()
elif returnCode == wx.ID_CANCEL:
dlg.Destroy()
return
finally:
dlg.Destroy()
f = open(self.saveComponentPath, 'w')
cPickle.dump(('component', self.active_comp), f)
def displayPlatformInfo(self):
if self.parent == None:
return
self.deviceChoice.Clear()
self.nodeChoice.Clear()
for x in self.parent.active_plat.nodes:
self.nodeChoice.Append(x.name, x)
tmpNode = None
if self.active_comp.device != None:
for x in self.parent.active_plat.nodes:
for d in x.Devices:
if d == self.active_comp.device:
tmpNode = x
if tmpNode != None:
pos = self.nodeChoice.FindString(tmpNode.name)
self.nodeChoice.SetSelection(pos)
for d in tmpNode.Devices:
self.deviceChoice.Append(d.name, d)
pos = self.deviceChoice.FindString(
self.active_comp.device.name)
self.deviceChoice.SetSelection(pos)
else:
tmpstr = 'ERROR! Cannot find the ' + self.active_comp.device.name
tmpstr += ' device in current Platform configuration.'
tmpstr += '\nSetting device assignment to None.'
errorMsg(self, tmpstr)
self.active_comp.device = None
def checkSrcBox(self):
srcSel = self.srcBox.GetSelection()
if srcSel == self.srcBox.GetRootItem():
# nothing is selected in the source box
errorMsg(self,"Please select a source Port")
return False
else:
return True
def OnValueListPopupRemoveMenu(self, event):
if self.editable == False:
errorMsg(self,"This property is not removable!")
return
sel = self.valueList.GetFirstSelected()
if sel >= 0:
if self.elementType == "Simple":
self.addValue.Enable(True)
self.valueList.DeleteItem(sel)
event.Skip()
def getInterface(repid,name):
try:
repid = repid.strip('IDL:')
repid = repid[:repid.rfind(':')]
tmpNS = repid[:repid.find('/')]
tmpName = repid[repid.find('/')+1:]
newInt = CC.Interface(tmpName,nameSpace=tmpNS)
return newInt
except:
errorMsg(parent,"Can't read the Interface information for port: " + name)
return None
def OnElementChoiceChoice(self, event):
pos = self.elementChoice.GetSelection()
if pos == wx.NOT_FOUND:
return
self.elementType = self.elementChoice.GetString(pos)
if self.elementType != "Simple" and self.elementType != "SimpleSequence":
errorMsg(self,'This element type is not supported yet!')
self.elementType = "Simple"
self.elementChoice.SetSelection(0)
self.refreshDisplay()
event.Skip()
def getInterface(repid, name):
try:
repid = repid.strip('IDL:')
repid = repid[:repid.rfind(':')]
tmpNS = repid[:repid.find('/')]
tmpName = repid[repid.find('/') + 1:]
newInt = CC.Interface(tmpName, nameSpace=tmpNS)
return newInt
except:
errorMsg(parent,
"Can't read the Interface information for port: " + name)
return None
def OnOkBtnButton(self, event):
tempLn = self.portNameBox.GetLineText(0)
if tempLn == '':
errorMsg(self,'Please enter a port name!')
return
sn = self.intBox.GetSelection()
if sn == self.intBox.GetRootItem() or self.intBox.GetItemParent(sn) == self.intBox.GetRootItem():
errorMsg(self,'Please select an Interface!')
return
tempType = self.typeChoice.GetSelection()
if tempType == wx.NOT_FOUND:
errorMsg(self,'Please select a Type!')
return
if tempType == 0:
typeS = "Uses"
else:
typeS = "Provides"
for p in self.active_comp.ports:
if tempLn == p.name and typeS == p.type:
errorMsg(self,"Port name <" + tempLn + "> already in use as a '"+typeS+"' port.")
return
selectedInt = self.intBox.GetPyData(sn)
tempP = ComponentClass.Port(tempLn,copy.deepcopy(selectedInt),typeS)
self.active_comp.ports.append(tempP)
self.Close()
event.Skip()
def getBaseName(alfFrame, spd_path):
# Create a binding of the SAD file
doc_spd = ALFutils.getDOM (alfFrame.fileMgr, spd_path)
if doc_spd is None:
print "INvalid doc_spd - spd_path = ",spd_path
return None
# TODO: validate against dtd
try:
softpkgNode = doc_spd.getElementsByTagName("softpkg")[0]
except:
errorMsg(parent, "Invalid SPD file: " + spd_path + "; no \"softpkg\" node found")
return None
return str(softpkgNode.getAttribute("name"))
def OnOkBtnButton(self, event):
tempLn = self.portNameBox.GetLineText(0)
if tempLn == '':
errorMsg(self, 'Please enter a port name!')
return
sn = self.intBox.GetSelection()
if sn == self.intBox.GetRootItem() or self.intBox.GetItemParent(
sn) == self.intBox.GetRootItem():
errorMsg(self, 'Please select an Interface!')
return
tempType = self.typeChoice.GetSelection()
if tempType == wx.NOT_FOUND:
errorMsg(self, 'Please select a Type!')
return
if tempType == 0:
typeS = "Uses"
else:
typeS = "Provides"
for p in self.active_comp.ports:
if tempLn == p.name and typeS == p.type:
errorMsg(
self, "Port name <" + tempLn + "> already in use as a '" +
typeS + "' port.")
return
selectedInt = self.intBox.GetPyData(sn)
tempP = ComponentClass.Port(tempLn, copy.deepcopy(selectedInt), typeS)
self.active_comp.ports.append(tempP)
self.Close()
event.Skip()
def OnOkButton(self, event):
pos = self.nodeChoice.GetSelection()
if pos == wx.NOT_FOUND:
errorMsg(self,"You must select a deployment node.")
return
tempLn = self.nameBox.GetLineText(0)
if tempLn == '':
errorMsg(self,'Invalid instance name.')
return
self.DeploymentNode = self.nodeChoice.GetClientData(pos)
self.InstanceName = tempLn
event.Skip()
def OnOkButton(self, event):
pos = self.nodeChoice.GetSelection()
if pos == wx.NOT_FOUND:
errorMsg(self, "You must select a deployment node.")
return
tempLn = self.nameBox.GetLineText(0)
if tempLn == '':
errorMsg(self, 'Invalid instance name.')
return
self.DeploymentNode = self.nodeChoice.GetClientData(pos)
self.InstanceName = tempLn
event.Skip()
def OnCloseBtnButton(self, event):
if self.parent == None:
self.Show(False)
self.Close()
return
tempLn = self.compNameBox.GetLineText(0)
if tempLn == '':
errorMsg(self,'Please enter a component name first')
return
for c in self.parent.active_wave.components:
if c != self.active_comp and c.name == tempLn:
errorMsg(self,'Invalid name - a component by that name already exists')
return
#Component names with spaces do not work
if tempLn.find(' ') != -1:
errorMsg(self,'Resource names can not have spaces in them.\nReplacing spaces with "_".')
tempLn = tempLn.replace(' ','_')
self.active_comp.changeName(tempLn)
self.MakeModal(False)
self.parent.displayComps()
self.parent.displayNodes()
self.Show(False)
event.Skip()
def OnCloseBtnButton(self, event):
if self.parent == None:
self.Show(False)
self.Close()
return
tempLn = self.compNameBox.GetLineText(0)
if tempLn == '':
errorMsg(self, 'Please enter a component name first')
return
for c in self.parent.active_wave.components:
if c != self.active_comp and c.name == tempLn:
errorMsg(
self,
'Invalid name - a component by that name already exists')
return
#Component names with spaces do not work
if tempLn.find(' ') != -1:
errorMsg(
self,
'Resource names can not have spaces in them.\nReplacing spaces with "_".'
)
tempLn = tempLn.replace(' ', '_')
self.active_comp.changeName(tempLn)
self.MakeModal(False)
self.parent.displayComps()
self.parent.displayNodes()
self.Show(False)
event.Skip()
def checkDstBox(self):
dstSel = self.dstBox.GetSelection()
if dstSel == self.dstBox.GetRootItem():
# nothing is selected in the source box
errorMsg(self,"Please select a destination Port")
return False
elif self.dstBox.GetItemParent(dstSel) == self.dstBox.GetRootItem():
# a main level component was selected for the destination
errorMsg(self,"Invalid destination selection.")
return False
else:
tmpP = self.dstBox.GetPyData(dstSel)
if isinstance(tmpP,ComponentClass.Port):
return True
else:
errorMsg(self,"Invalid destination selection.")
return False
def OnMenuComponentGenerateMenu(self, event):
#select which template to use
if self.template == "basic_ports":
import WaveDev.wavedev.generate.templates.basic_ports.genStructure as genStruct
elif self.template == "custom_ports":
import WaveDev.wavedev.generate.templates.custom_ports.genStructure as genStruct
elif self.template == "py_comp":
import WaveDev.wavedev.generate.templates.py_comp.genStructure as genStruct
else:
errorMsg(
self.parent, self.template +
" is not supported in OnMenuComponentGenerateMenu within the componentFrame"
)
return
tempLn = self.compNameBox.GetLineText(0)
if tempLn == '':
errorMsg(self, 'Please enter a component name first')
return
self.active_comp.name = tempLn
tempDescr = self.compDescrBox.GetLineText(0)
if tempDescr == '':
errorMsg(self, 'Please enter a component description first')
return
self.active_comp.description = tempDescr
dlg = wx.DirDialog(self)
dlg.SetMessage("Please select the place to generate the code")
dlg.SetPath(os.path.expanduser('~'))
try:
if dlg.ShowModal() == wx.ID_OK:
savepath = dlg.GetPath()
else:
return
finally:
dlg.Destroy()
if savepath[len(savepath) - 1] != '/':
savepath = savepath + '/'
self.path = savepath
self.path = self.path + self.active_comp.name
if os.path.exists(self.path) == False:
os.mkdir(self.path)
#if os.path.exists(self.path + '/aclocal.d') == False:
# os.mkdir(self.path + '/aclocal.d')
#for f in os.listdir('generate/aclocal.d/'):
# if not os.path.isdir(f):
# shutil.copy('generate/aclocal.d/' + f,self.path + '/aclocal.d')
shutil.copy(self.wavedevPath + '/generate/reconf', self.path)
chmod(self.path + '/reconf', 0755)
if self.licensefile != "":
shutil.copy(self.licensefile, self.path + '/LICENSE')
if self.active_comp.timing:
found_timing = False
for p in self.active_comp.ports:
if p.interface.name == 'timingStatus':
found_timing = True
if not found_timing:
self.active_comp.ports.append(self.timing_port)
gen = genStruct.genAll(savepath, self.wavedevPath, None)
gen.writeCompMakefile(self.active_comp, self.path)
gen.writeConfAC(self.path, self.active_comp.name, self.active_comp.ace,
False, self.installPath)
gen.genCompFiles(self.active_comp)
component_gen.gen_scd(self.active_comp, savepath, self.wavedevPath)
component_gen.gen_spd(self.active_comp, savepath, self.wavedevPath)
component_gen.gen_prf(self.active_comp, savepath, self.wavedevPath)
def importStandardIdl(self):
'''Imports IDL from cf, standardinterfaces, and custominterfaces'''
#temporarily change self.parent to self so this works
#normally this function looks at the MainFrame - but not in standalone
changedParent = False
if self.parent == None:
self.parent = self
changedParent = True
if os.path.isfile(self.parent.ossieIncludePath + "cf.idl"):
cfIdl_file = self.parent.ossieIncludePath + "cf.idl"
else:
tmpstr = "Cannot find cf.idl in the OSSIE installation location:\n"
tmpstr += self.parent.ossieIncludePath
errorMsg(self.parent,tmpstr)
# for each file in the standardinterfaces directory, import all available
# interfaces (skip standardIdl files)
standard_idl_list = os.listdir(self.parent.stdIdlPath)
try:
custom_idl_list = os.listdir(self.parent.customIdlPath)
except OSError: # this will occur if customIdlPath was never set
# as a result of customInterfaces not being found
custom_idl_list = []
if len(standard_idl_list) <= 0:
tmpstr = "Can't find any files in: " + self.parent.stdIdlPath
errorMsg(self.parent,tmpstr)
return
# Add the CF interfaces first - in case another file includes them, we
# don't want them asscociated with anything other than cf.idl
self.Available_Ints.extend(importIDL.getInterfaces(cfIdl_file))
# import standard interfaces
for standard_idl_file in standard_idl_list:
# standardIdl files are not included because they are aggregates of the other interfaces
if 'standardIdl' in standard_idl_file:
continue
if string.lower(os.path.splitext(standard_idl_file)[1]) != ".idl":
# ignore non idl files
continue
tempInts = importIDL.getInterfaces(self.parent.stdIdlPath+standard_idl_file)
for t in tempInts:
if t not in self.Available_Ints:
self.Available_Ints.append(t)
# import custom interfaces
for custom_idl_file in custom_idl_list:
# ignore aggregate 'customInterfaces.idl' file
if 'customInterfaces' in custom_idl_file:
continue
if string.lower(os.path.splitext(custom_idl_file)[1]) != ".idl":
# ignore non idl files
continue
tempInts = importIDL.getInterfaces(self.parent.customIdlPath+custom_idl_file)
for t in tempInts:
if t not in self.Available_Ints:
# print "Testing: " + t.name + " " + idl_file + " " + str(len(self.Available_Ints))
self.Available_Ints.append(t)
if t.name == 'timingStatus':
self.timing_interface = CC.Interface(t.name, t.nameSpace, t.operations, t.filename, t.fullpath)
self.timing_port = CC.Port('send_timing_report', self.timing_interface, "Uses", "data")
# print "CF.py: " + t.name + " " + str(len(t.operations))
if changedParent == True:
self.parent = None
def getWaveform(sad_path, parent, interfaces):
# Create a binding of the SAD file
#Get the dom from ALFutils. if the file is not found, the ALFutils module
#will take care of reporting error
doc_sad = ALFutils.getDOM(parent.fileMgr, sad_path)
if doc_sad is None:
return None
# TODO: validate SAD file against the dtd
# try to find "softwareassembly" node
try:
softwareassemblyNode = doc_sad.getElementsByTagName("softwareassembly")[0]
except:
errorMsg(parent, "Invalid SAD file: " + sad_path + "; no \"softwareassembly\" tag")
return None
# try to find "componentfiles" node
try:
componentfilesNode = softwareassemblyNode.getElementsByTagName("componentfiles")[0]
except:
errorMsg(parent, "Invalid SAD file: " + sad_path + "; no \"componentfiles\" tag")
return None
# At this point, assume SAD file validates against the DTD; no longer
# necessary to use try/except statements
waveform_name = softwareassemblyNode.getAttribute("name")
new_waveform = WC.Waveform(str(waveform_name))
# Get list of "componentfile" nodes from SAD file
componentfileNodeList = componentfilesNode.getElementsByTagName("componentfile")
# Dictionary storing mapping of componentfile ids to file names (unicode)
compfiles = {}
for componentfileNode in componentfileNodeList:
localfilename = componentfileNode.getElementsByTagName("localfile")[0].getAttribute("name")
#localfilename resembles "/xml/TxDemo/TxDemo.spd.xml". taht itself should be enough
#to open the file through FileManager. No need to add /sdr/dom
tmps = localfilename
#have to pass the parent(alf frame object) so that getBaseName can make use of fileMgr
base_name = getBaseName(parent, tmps)
# TODO: this next line is a dirty hack: use the python os module to strip name from path
tmps = tmps[0:tmps.rfind('/')] # remove actual file name (importResource format)
componentfileid = componentfileNode.getAttribute("id")
compfiles[componentfileid] = (tmps,base_name)
# Create the component objects from the componentplacement section
componentplacementNodeList = softwareassemblyNode.getElementsByTagName("componentplacement")
for componentplacementNode in componentplacementNodeList:
# get refid
componentfilerefNode = componentplacementNode.getElementsByTagName("componentfileref")[0]
refid = componentfilerefNode.getAttribute("refid")
# get component path from compfiles dictionary
comp_path = compfiles[refid][0]
# get componentinstantiation id (strip off "DCE:")
componentinstantiationNode = componentplacementNode.getElementsByTagName("componentinstantiation")[0]
comp_id = str(componentinstantiationNode.getAttribute("id")).replace("DCE:","")
# get component base name from compfiles dictionary
comp_base_name = str(compfiles[refid][1])
# get usagename
usagenameNode = componentinstantiationNode.getElementsByTagName("usagename")[0]
comp_name = str(usagenameNode.firstChild.data)
new_comp = importResourceForALF.getResource(comp_path, comp_base_name, parent)
new_comp.name = comp_name
new_comp.uuid = comp_id
new_comp.file_uuid = str(refid.replace(comp_base_name + '_',''))
new_waveform.components.append(new_comp)
# Assign interfaces based on import IDL - gets the operations right this way
for comp in new_waveform.components:
assignInterfaces(comp,interfaces)
# Find and set the AssemblyController through its refid
assemblycontrollerNode = softwareassemblyNode.getElementsByTagName("assemblycontroller")[0]
# NOTE: first and only child is "componentinstantiationref"
componentinstantiationrefNode = assemblycontrollerNode.getElementsByTagName("componentinstantiationref")[0]
ac = str(componentinstantiationrefNode.getAttribute("refid"))
ac = ac.replace("DCE:","")
for c in new_waveform.components:
if c.uuid == ac:
c.AssemblyController = True
# Create the connections
connectinterfaceNodeList = softwareassemblyNode.getElementsByTagName("connectinterface")
if len(connectinterfaceNodeList) != 0:
for connectinterfaceNode in connectinterfaceNodeList:
usesportNode = connectinterfaceNode.getElementsByTagName("usesport")[0]
usesid = usesportNode.getElementsByTagName("usesidentifier")[0].firstChild.data
# NOTE: first and only child of "findby" node is "namingservice"
findbyNode = usesportNode.getElementsByTagName("findby")[0]
nsname = findbyNode.getElementsByTagName("namingservice")[0].getAttribute("name")
usesid = str(usesid)
nsname = str(nsname)
uses_comp = getCompFromNSName(nsname,new_waveform)
# Check for providesport
providesportNodeList = connectinterfaceNode.getElementsByTagName("providesport")
if len(providesportNodeList) != 0:
# "providesport" tag exists
providesportNode = providesportNodeList[0]
# get providesidentifier
providesidentifierNode = providesportNode.getElementsByTagName("providesidentifier")[0]
providesid = str(providesidentifierNode.firstChild.data)
# get namingservice name
# NOTE: first and only child of "findby" node is "namingservice"
findbyNode = providesportNode.getElementsByTagName("findby")[0]
nsname = str(findbyNode.getElementsByTagName("namingservice")[0].getAttribute("name"))
provides_comp = getCompFromNSName(nsname,new_waveform)
else:
# "providesport" tag does not exist
# Probably is a hardware port located directly on the naming service
# Not supporting this quite yet
continue
# NOTE: the next line is only supported with amara
if not hasattr(ci, 'findby'):
errorMsg(parent, "Invalid SAD file")
return None
nsname = str(ci.findby.namingservice.name)
uses_port = None
provides_port = None
#try statement is a temporary fix to ALF's inability to display devices
try:
for port in uses_comp.ports:
if port.name == usesid:
uses_port = port
for port in provides_comp.ports:
if port.name == providesid:
provides_port = port
# Unfortunately there is no information stored in the XML about which component
# initiated the connection in OWD - so we'll say that uses is always the local port
new_connection = CC.Connection(uses_port, provides_port, provides_comp)
uses_comp.connections.append(new_connection)
except:
pass #skip the device
return new_waveform
def importStandardIdl(self):
'''Imports IDL from cf, standardinterfaces, and custominterfaces'''
#temporarily change self.parent to self so this works
#normally this function looks at the MainFrame - but not in standalone
changedParent = False
if self.parent == None:
self.parent = self
changedParent = True
if os.path.isfile(self.parent.ossieIncludePath + "cf.idl"):
cfIdl_file = self.parent.ossieIncludePath + "cf.idl"
else:
tmpstr = "Cannot find cf.idl in the OSSIE installation location:\n"
tmpstr += self.parent.ossieIncludePath
errorMsg(self.parent, tmpstr)
# for each file in the standardinterfaces directory, import all available
# interfaces (skip standardIdl files)
standard_idl_list = os.listdir(self.parent.stdIdlPath)
try:
custom_idl_list = os.listdir(self.parent.customIdlPath)
except OSError: # this will occur if customIdlPath was never set
# as a result of customInterfaces not being found
custom_idl_list = []
if len(standard_idl_list) <= 0:
tmpstr = "Can't find any files in: " + self.parent.stdIdlPath
errorMsg(self.parent, tmpstr)
return
# Add the CF interfaces first - in case another file includes them, we
# don't want them asscociated with anything other than cf.idl
self.Available_Ints.extend(importIDL.getInterfaces(cfIdl_file))
# import standard interfaces
for standard_idl_file in standard_idl_list:
# standardIdl files are not included because they are aggregates of the other interfaces
if 'standardIdl' in standard_idl_file:
continue
if string.lower(os.path.splitext(standard_idl_file)[1]) != ".idl":
# ignore non idl files
continue
tempInts = importIDL.getInterfaces(self.parent.stdIdlPath +
standard_idl_file)
for t in tempInts:
if t not in self.Available_Ints:
self.Available_Ints.append(t)
# import custom interfaces
for custom_idl_file in custom_idl_list:
# ignore aggregate 'customInterfaces.idl' file
if 'customInterfaces' in custom_idl_file:
continue
if string.lower(os.path.splitext(custom_idl_file)[1]) != ".idl":
# ignore non idl files
continue
tempInts = importIDL.getInterfaces(self.parent.customIdlPath +
custom_idl_file)
for t in tempInts:
if t not in self.Available_Ints:
# print "Testing: " + t.name + " " + idl_file + " " + str(len(self.Available_Ints))
self.Available_Ints.append(t)
if t.name == 'timingStatus':
self.timing_interface = CC.Interface(
t.name, t.nameSpace, t.operations, t.filename,
t.fullpath)
self.timing_port = CC.Port('send_timing_report',
self.timing_interface,
"Uses", "data")
# print "CF.py: " + t.name + " " + str(len(t.operations))
if changedParent == True:
self.parent = None
def OnAddPropButton(self, event):
# Check for the name
tmpName = self.nameBox.GetLineText(0)
if tmpName == '':
errorMsg(self,"Please enter a property name first!")
return
# Check for the id
tmpid = self.idBox.GetLineText(0)
if tmpid == '':
errorMsg(self,"Please enter a property id first!")
return
# Check for the mode
pos = self.modeChoice.GetSelection()
if pos == wx.NOT_FOUND:
errorMsg(self,"Please select a property mode first!")
return
tmpMode = self.modeChoice.GetString(pos)
# Get the description
tmpDes = self.description.GetValue()
# Check for the type ex: bool, char, short, etc.
pos = self.typeChoice.GetSelection()
if pos == wx.NOT_FOUND:
errorMsg(self,"Please select a type first!")
return
tmpType = self.typeChoice.GetString(pos)
if self.elementType == "Simple":
# instantiate the property object
newProp = CC.SimpleProperty(tmpName,tmpMode,tmpType,tmpDes)
# store the default value and the value
if self.valueList.GetItemCount() == 0:
errorMsg(self,"Please enter a value first!")
return
v = self.valueList.GetItem(0,0)
dv = self.valueList.GetItem(0,1)
newProp.value = v.GetText()
newProp.defaultValue = dv.GetText()
if self.elementType == "SimpleSequence":
# store the default value and the value
if self.valueList.GetItemCount() == 0:
errorMsg(self,"Please enter a value first!")
return
newProp = CC.SimpleSequenceProperty(tmpName,tmpMode,tmpType,tmpDes)
newProp.values = []
newProp.defaultValues = []
for x in range(self.valueList.GetItemCount()):
v = self.valueList.GetItem(x,0)
dv = self.valueList.GetItem(x,1)
newProp.values.append(v.GetText())
newProp.defaultValues.append(dv.GetText())
# store the enum if any
newProp.enum = self.enumBox.GetLineText(0)
# Check for the kind ex: allocation, configure, test, etc.
pos = self.kindChoice.GetSelection()
if pos == wx.NOT_FOUND:
errorMsg(self,"Please select a kind first!")
return
newProp.kind = self.kindChoice.GetString(pos)
# Check and store the range
tmpMin = self.minBox.GetLineText(0)
tmpMax = self.maxBox.GetLineText(0)
if tmpMin == 'min' or tmpMin == '':
tmpMin = -1
if tmpMax == 'max' or tmpMax == '':
tmpMax = -1
newProp.range = (tmpMin,tmpMax)
# Check and store the action
pos = self.actionChoice.GetSelection()
if pos == wx.NOT_FOUND:
if newProp.kind == "allocation":
errorMsg(self,"Please select an action first!")
return
else:
newProp.action = self.actionChoice.GetString(pos)
self.parent.active_comp.properties.append(newProp)
self.Close()
event.Skip()
def getResource(path, Rname, parent):
scdPath = findFile(path, Rname, ".scd.xml")
if scdPath == None:
errorMsg(parent, "No scd file found for: " + Rname)
return
spdPath = findFile(path, Rname, ".spd.xml")
prfPath = findFile(path, Rname, ".prf.xml")
#
# Build the main component or device from the SCD file
#
doc_scd = xml.dom.minidom.parse(scdPath)
try:
componenttypeNode = doc_scd.getElementsByTagName("componenttype")
componenttype = componenttypeNode[0].childNodes[0].data
except:
errorMsg(parent, "Invalid file: " + scdPath)
return None
doc_spd = xml.dom.minidom.parse(spdPath)
# get resource description
# note: this is not the same as the implementation description
softpkgNode = doc_spd.getElementsByTagName("softpkg")[0]
Rdescription = ''
for n in softpkgNode.childNodes:
if n.nodeName == "description":
resDescriptionNode = doc_spd.getElementsByTagName("description")
try:
Rdescription = resDescriptionNode[0].firstChild.data
except:
pass
break
#Instantiate a new component of the appropriate type
if componenttype == u'resource':
newComp = CC.Component(name=Rname,
type='resource',
description=Rdescription)
elif componenttype == u'executabledevice':
newComp = CC.Component(name=Rname,
type='executabledevice',
description=Rdescription)
elif componenttype == u'loadabledevice':
newComp = CC.Component(name=Rname,
type='loadabledevice',
description=Rdescription)
elif componenttype == u'device':
newComp = CC.Component(name=Rname,
type='device',
description=Rdescription)
else:
errorMsg(parent, "Can't identify resource type for: " + Rname)
return None
# Get the Ports
portsNodes = doc_scd.getElementsByTagName("ports")
for node in portsNodes:
providesPortsNodes = node.getElementsByTagName("provides")
usesPortsNodes = node.getElementsByTagName("uses")
# Provides ports
for node in providesPortsNodes:
tmpName = node.getAttribute("providesname")
tmpInt = getInterface(node.getAttribute("repid"), tmpName)
if tmpInt == None:
return None
portTypeNodeList = node.getElementsByTagName("porttype")
tmpType = portTypeNodeList[0].getAttribute("type")
newPort = CC.Port(tmpName, tmpInt, type='Provides', portType=tmpType)
newComp.ports.append(newPort)
# Uses ports
for node in usesPortsNodes:
tmpName = node.getAttribute("usesname")
tmpInt = getInterface(node.getAttribute("repid"), tmpName)
if tmpInt == None:
return None
portTypeNodeList = node.getElementsByTagName("porttype")
tmpType = portTypeNodeList[0].getAttribute("type")
newPort = CC.Port(tmpName, tmpInt, type='Uses', portType=tmpType)
newComp.ports.append(newPort)
# Make sure that xml and code are not generated for this resource
newComp.generate = False
# Store the name of the file without the suffix (.scd.xml)
i = scdPath.rfind("/")
if i != -1:
newComp.xmlName = scdPath[i + 1:-8]
else:
newComp.xmlName = scdPath[:-8]
#
# Import the properties from the PRF file
#
# If there are no properties, just return the component as is
if prfPath == None:
return newComp
doc_prf = xml.dom.minidom.parse(prfPath)
try:
propertyNodeList = doc_prf.getElementsByTagName("properties")
except:
errorMsg(parent, "Invalid file: " + prfPath)
return None
# get simple properties
simplePropertyNodeList = doc_prf.getElementsByTagName("simple")
for node in simplePropertyNodeList:
p = getSimpleProperty(node)
if p == None:
print "There was an error parsing simple properties in the PRF file " + prfPath
continue
newComp.properties.append(p)
# get simple sequence properties
simpleSequencePropertyNodeList = doc_prf.getElementsByTagName(
"simplesequence")
for node in simpleSequencePropertyNodeList:
p = getSimpleSequenceProperty(node, prfPath)
if p == None:
print "There was an error parsing simple sequence properties in the PRF file " + prfPath
continue
newComp.properties.append(p)
return newComp
def OnOkButton(self, event):
if self.editable:
# Check for the name
tmpName = self.nameBox.GetLineText(0)
if tmpName == '':
errorMsg(self,"Please enter a property name first!")
return
self.active_prop.name = tmpName
# Check for the id
tmpid = self.idBox.GetLineText(0)
if tmpid == '':
errorMsg(self,"Please enter a property id first!")
return
self.active_prop.id = tmpid
# Check for the mode
pos = self.modeChoice.GetSelection()
if pos == wx.NOT_FOUND:
errorMsg(self,"Please select a property mode first!")
return
tmpMode = self.modeChoice.GetString(pos)
self.active_prop.mode = tmpMode
# Get the description
tmpDes = self.description.GetValue()
self.active_prop.description = tmpDes
# Check for the type ex: bool, char, short, etc.
pos = self.typeChoice.GetSelection()
if pos == wx.NOT_FOUND:
errorMsg(self,"Please select a type first!")
return
tmpType = self.typeChoice.GetString(pos)
self.active_prop.type = tmpType
if self.elementType == "Simple":
# store the default value and the value
if self.valueList.GetItemCount() == 0:
errorMsg(self,"Please enter a value first!")
return
v = self.valueList.GetItem(0,0)
dv = self.valueList.GetItem(0,1)
self.active_prop.value = v.GetText()
self.active_prop.defaultValue = dv.GetText()
if self.elementType == "SimpleSequence":
# store the default value and the value
if self.valueList.GetItemCount() == 0:
errorMsg(self,"Please enter a value first!")
return
self.active_prop.values = []
self.active_prop.defaultValues = []
for x in range(self.valueList.GetItemCount()):
v = self.valueList.GetItem(x,0)
dv = self.valueList.GetItem(x,1)
self.active_prop.values.append(v.GetText())
self.active_prop.defaultValues.append(dv.GetText())
# store the enum if any
self.active_prop.enum = self.enumBox.GetLineText(0)
# Check for the kind ex: allocation, configure, test, etc.
pos = self.kindChoice.GetSelection()
if pos == wx.NOT_FOUND:
errorMsg(self,"Please select a kind first!")
return
self.active_prop.kind = self.kindChoice.GetString(pos)
# Check and store the range
tmpMin = self.minBox.GetLineText(0)
tmpMax = self.maxBox.GetLineText(0)
if tmpMin == 'min' or tmpMin == '':
tmpMin = -1
if tmpMax == 'max' or tmpMax == '':
tmpMax = -1
self.active_prop.range = (tmpMin,tmpMax)
# Check and store the action
pos = self.actionChoice.GetSelection()
if pos == wx.NOT_FOUND:
if self.active_prop.kind == "allocation":
errorMsg(self,"Please select an action first!")
return
else:
self.active_prop.action = self.actionChoice.GetString(pos)
else:
if self.elementType == "Simple":
# store the default value and the value
if self.valueList.GetItemCount() == 0:
errorMsg(self,"Please enter a value first!")
return
v = self.valueList.GetItem(0,0)
dv = self.valueList.GetItem(0,1)
self.active_prop.value = v.GetText()
self.active_prop.defaultValue = dv.GetText()
if self.elementType == "SimpleSequence":
# store the default value and the value
if self.valueList.GetItemCount() == 0:
errorMsg(self,"Please enter a value first!")
return
self.active_prop.values = []
self.active_prop.defaultValues = []
for x in range(self.valueList.GetItemCount()):
v = self.valueList.GetItem(x,0)
dv = self.valueList.GetItem(x,1)
self.active_prop.values.append(v.GetText())
self.active_prop.defaultValues.append(dv.GetText())
self.Close()
def getNode(inpath, Nname, parent):
scdPath = inpath + "DeviceManager" + ".scd.xml"
spdPath = inpath + "DeviceManager" + ".spd.xml"
prfPath = inpath + "DeviceManager" + ".prf.xml"
dcdPath = inpath + "DeviceManager" + ".dcd.xml"
# import the node description from the node's .spd.xml file
doc_node_spd = xml.dom.minidom.parse(spdPath)
softpkgNode = doc_node_spd.getElementsByTagName("softpkg")[0]
Ndescription = ''
for n in softpkgNode.childNodes:
if n.nodeName == "description":
nDescriptionNode = doc_node_spd.getElementsByTagName("description")
try:
Ndescription = nDescriptionNode[0].firstChild.data
except:
pass
break
newNode = CC.Node(name=Nname,
path=inpath,
description=Ndescription,
generate=False)
#
# Build the node from the DCD
#
doc_dcd = xml.dom.minidom.parse(dcdPath)
partitioningNodeList = doc_dcd.getElementsByTagName('partitioning')
if len(partitioningNodeList) != 1:
errorMsg(parent, "Invalid file: " + dcdPath + " (partitioning)")
return None
try:
deviceconfigurationNode = doc_dcd.getElementsByTagName(
'deviceconfiguration')[0]
except:
errorMsg(parent, "Invalid file: " + dcdPath + " (deviceconfiguration)")
return None
newNode.id = deviceconfigurationNode.getAttribute("id")
#
componentplacementNodeList = doc_dcd.getElementsByTagName(
"componentplacement")
for componentplacementNode in componentplacementNodeList:
newComp = CC.Component(type='executabledevice')
newComp.name = componentplacementNode.getElementsByTagName(
"usagename")[0].firstChild.data
# componentinstantiation
# strip off the DCE: part of the id becuase it will get added back in later
tmpUUID = componentplacementNode.getElementsByTagName(
"componentinstantiation")[0].getAttribute("id")
newComp.uuid = str(tmpUUID).strip("DCE:")
# componentfileref
tmpNode = componentplacementNode.getElementsByTagName(
"componentfileref")
newComp.file_uuid = str(tmpNode[0].getAttribute("refid")).strip(
"DCE:") # is this strip necessary? -JDG
local_SPD = ""
componentfileNodeList = doc_dcd.getElementsByTagName("componentfile")
for componentfileNode in componentfileNodeList:
if componentfileNode.getAttribute("id") == newComp.file_uuid:
localfileNodeList = componentfileNode.getElementsByTagName(
"localfile")
local_SPD = localfileNodeList[0].getAttribute("name")
del localfileNodeList
break
pathSPD = parent.installPath + "dev/" + local_SPD
if not os.path.exists(pathSPD):
errorMsg(
parent, "Warning! Could not find " + pathSPD +
".\nCannot import node " + Nname)
return None
doc_spd = xml.dom.minidom.parse(pathSPD)
softpkgNode = doc_spd.getElementsByTagName("softpkg")[0]
newComp.baseName = softpkgNode.getAttribute("name")
#pathSCD = "/sdr/sca/xml/"+newComp.baseName+"/"+doc_spd.softpkg.descriptor.localfile.name
localfileNode = softpkgNode.getElementsByTagName("localfile")[0]
pathSCD = parent.installPath + "dev" + localfileNode.getAttribute(
"name")
doc_scd = xml.dom.minidom.parse(pathSCD)
# Get the Ports
portsNodes = doc_scd.getElementsByTagName("ports")
for node in portsNodes:
providesPortsNodes = node.getElementsByTagName("provides")
usesPortsNodes = node.getElementsByTagName("uses")
# Provides ports
for node in providesPortsNodes:
tmpName = node.getAttribute("providesname")
tmpInt = getInterface(node.getAttribute("repid"), tmpName)
if tmpInt == None:
errorMsg(parent, "No repid found in ProvidesPort")
return None
portTypeNodeList = node.getElementsByTagName("porttype")
tmpType = portTypeNodeList[0].getAttribute("type")
newPort = CC.Port(tmpName,
tmpInt,
type='Provides',
portType=tmpType)
newComp.ports.append(newPort)
# Uses ports
for node in usesPortsNodes:
tmpName = node.getAttribute("usesname")
tmpInt = getInterface(node.getAttribute("repid"), tmpName)
if tmpInt == None:
errorMsg(parent, "No repid fond in UsesPort")
return None
portTypeNodeList = node.getElementsByTagName("porttype")
tmpType = portTypeNodeList[0].getAttribute("type")
newPort = CC.Port(tmpName, tmpInt, type='Uses', portType=tmpType)
newComp.ports.append(newPort)
# Make sure that xml and code are not generated for this resource
newComp.generate = False
# Store the name of the file without the suffix (.scd.xml)
newComp.xmlName = os.path.splitext(
os.path.splitext(os.path.basename(pathSCD))[0])[0]
newNode.Devices.append(newComp)
#
# Import the properties from the PRF file
#
# If there are no properties, just return the component as is
#if pathPRF == None:
# return newComp
#
#doc_prf = amara.parse(stripDoctype(prfPath))
##doc_prf = binderytools.bind_file(prfPath)
#if not hasattr(doc_prf,'properties'):
# errorMsg(parent,"Invalid file: " + prfPath)
# return None
#
#if hasattr(doc_prf.properties,"simple"):
# for s in doc_prf.properties.simple:
# p = getSimpleProperty(s)
# if p == None:
# #errorMsg(parent,"Invalid file: " + prfPath)
# continue
# newComp.properties.append(p)
#
#if hasattr(doc_prf.properties,"simplesequence"):
# for s in doc_prf.properties.simplesequence:
# p = getSimpleSequenceProperty(s)
# if p == None:
# #errorMsg(parent,"Invalid file: " + prfPath)
# continue
# newComp.properties.append(p)
return newNode
def getResource(path,Rname,parent):
scdPath = findFile(path,Rname,".scd.xml")
if scdPath == None:
errorMsg(parent,"No scd file found for: " + Rname)
return
spdPath = findFile(path,Rname,".spd.xml")
prfPath = findFile(path,Rname,".prf.xml")
#
# Build the main component or device from the SCD file
#
doc_scd = xml.dom.minidom.parse(scdPath)
try:
componenttypeNode = doc_scd.getElementsByTagName("componenttype")
componenttype = componenttypeNode[0].childNodes[0].data
except:
errorMsg(parent,"Invalid file: " + scdPath)
return None
doc_spd = xml.dom.minidom.parse(spdPath)
# get resource description
# note: this is not the same as the implementation description
softpkgNode = doc_spd.getElementsByTagName("softpkg")[0]
Rdescription = ''
for n in softpkgNode.childNodes:
if n.nodeName == "description":
resDescriptionNode = doc_spd.getElementsByTagName("description")
try:
Rdescription = resDescriptionNode[0].firstChild.data
except:
pass
break
#Instantiate a new component of the appropriate type
if componenttype == u'resource':
newComp = CC.Component(name=Rname,type='resource',description=Rdescription)
elif componenttype == u'executabledevice':
newComp = CC.Component(name=Rname,type='executabledevice',description=Rdescription)
elif componenttype == u'loadabledevice':
newComp = CC.Component(name=Rname,type='loadabledevice',description=Rdescription)
elif componenttype == u'device':
newComp = CC.Component(name=Rname,type='device',description=Rdescription)
else:
errorMsg(parent,"Can't identify resource type for: " + Rname)
return None
# Get the Ports
portsNodes = doc_scd.getElementsByTagName("ports")
for node in portsNodes:
providesPortsNodes = node.getElementsByTagName("provides")
usesPortsNodes = node.getElementsByTagName("uses")
# Provides ports
for node in providesPortsNodes:
tmpName = node.getAttribute("providesname")
tmpInt = getInterface( node.getAttribute("repid"), tmpName )
if tmpInt == None:
return None
portTypeNodeList = node.getElementsByTagName("porttype")
tmpType = portTypeNodeList[0].getAttribute("type")
newPort = CC.Port(tmpName,tmpInt,type='Provides',portType=tmpType)
newComp.ports.append(newPort)
# Uses ports
for node in usesPortsNodes:
tmpName = node.getAttribute("usesname")
tmpInt = getInterface( node.getAttribute("repid"), tmpName )
if tmpInt == None:
return None
portTypeNodeList = node.getElementsByTagName("porttype")
tmpType = portTypeNodeList[0].getAttribute("type")
newPort = CC.Port(tmpName,tmpInt,type='Uses',portType=tmpType)
newComp.ports.append(newPort)
# Make sure that xml and code are not generated for this resource
newComp.generate = False
# Store the name of the file without the suffix (.scd.xml)
i = scdPath.rfind("/")
if i != -1:
newComp.xmlName = scdPath[i+1:-8]
else:
newComp.xmlName = scdPath[:-8]
#
# Import the properties from the PRF file
#
# If there are no properties, just return the component as is
if prfPath == None:
return newComp
doc_prf = xml.dom.minidom.parse(prfPath)
try:
propertyNodeList = doc_prf.getElementsByTagName("properties")
except:
errorMsg(parent,"Invalid file: " + prfPath)
return None
# get simple properties
simplePropertyNodeList = doc_prf.getElementsByTagName("simple")
for node in simplePropertyNodeList:
p = getSimpleProperty(node)
if p == None:
print "There was an error parsing simple properties in the PRF file " + prfPath
continue
newComp.properties.append(p)
# get simple sequence properties
simpleSequencePropertyNodeList = doc_prf.getElementsByTagName("simplesequence")
for node in simpleSequencePropertyNodeList:
p = getSimpleSequenceProperty(node, prfPath)
if p == None:
print "There was an error parsing simple sequence properties in the PRF file " + prfPath
continue
newComp.properties.append(p)
return newComp
def OnMenuComponentGenerateMenu(self, event):
#select which template to use
if self.template == "basic_ports":
import WaveDev.wavedev.generate.templates.basic_ports.genStructure as genStruct
elif self.template == "custom_ports":
import WaveDev.wavedev.generate.templates.custom_ports.genStructure as genStruct
elif self.template == "py_comp":
import WaveDev.wavedev.generate.templates.py_comp.genStructure as genStruct
else:
errorMsg(self.parent, self.template + " is not supported in OnMenuComponentGenerateMenu within the componentFrame")
return
tempLn = self.compNameBox.GetLineText(0)
if tempLn == '':
errorMsg(self,'Please enter a component name first')
return
self.active_comp.name = tempLn
tempDescr = self.compDescrBox.GetLineText(0)
if tempDescr == '':
errorMsg(self,'Please enter a component description first')
return
self.active_comp.description = tempDescr
dlg = wx.DirDialog(self)
dlg.SetMessage("Please select the place to generate the code")
dlg.SetPath(os.path.expanduser('~'))
try:
if dlg.ShowModal() == wx.ID_OK:
savepath = dlg.GetPath()
else:
return
finally:
dlg.Destroy()
if savepath[len(savepath)-1] != '/':
savepath = savepath + '/'
self.path = savepath
self.path = self.path + self.active_comp.name
if os.path.exists(self.path) == False:
os.mkdir(self.path)
#if os.path.exists(self.path + '/aclocal.d') == False:
# os.mkdir(self.path + '/aclocal.d')
#for f in os.listdir('generate/aclocal.d/'):
# if not os.path.isdir(f):
# shutil.copy('generate/aclocal.d/' + f,self.path + '/aclocal.d')
shutil.copy(self.wavedevPath + '/generate/reconf',self.path)
chmod(self.path + '/reconf', 0755)
if self.licensefile != "":
shutil.copy(self.licensefile,self.path + '/LICENSE')
if self.active_comp.timing:
found_timing = False
for p in self.active_comp.ports:
if p.interface.name == 'timingStatus':
found_timing = True
if not found_timing:
self.active_comp.ports.append(self.timing_port)
gen = genStruct.genAll(savepath, self.wavedevPath, None)
gen.writeCompMakefile(self.active_comp,self.path)
gen.writeConfAC(self.path, self.active_comp.name, self.active_comp.ace, False, self.installPath)
gen.genCompFiles(self.active_comp)
component_gen.gen_scd(self.active_comp, savepath, self.wavedevPath)
component_gen.gen_spd(self.active_comp, savepath, self.wavedevPath)
component_gen.gen_prf(self.active_comp, savepath, self.wavedevPath)
def getNode(inpath,Nname,parent):
scdPath = inpath + "DeviceManager" + ".scd.xml"
spdPath = inpath + "DeviceManager" + ".spd.xml"
prfPath = inpath + "DeviceManager" + ".prf.xml"
dcdPath = inpath + "DeviceManager" + ".dcd.xml"
# import the node description from the node's .spd.xml file
doc_node_spd = xml.dom.minidom.parse(spdPath)
softpkgNode = doc_node_spd.getElementsByTagName("softpkg")[0]
Ndescription = ''
for n in softpkgNode.childNodes:
if n.nodeName == "description":
nDescriptionNode = doc_node_spd.getElementsByTagName("description")
try:
Ndescription = nDescriptionNode[0].firstChild.data
except:
pass
break
newNode = CC.Node(name=Nname, path=inpath, description=Ndescription, generate=False)
#
# Build the node from the DCD
#
doc_dcd = xml.dom.minidom.parse(dcdPath)
partitioningNodeList = doc_dcd.getElementsByTagName('partitioning')
if len(partitioningNodeList) != 1:
errorMsg(parent,"Invalid file: " + dcdPath + " (partitioning)")
return None
try:
deviceconfigurationNode = doc_dcd.getElementsByTagName('deviceconfiguration')[0]
except:
errorMsg(parent,"Invalid file: " + dcdPath + " (deviceconfiguration)")
return None
newNode.id = deviceconfigurationNode.getAttribute("id")
#
componentplacementNodeList = doc_dcd.getElementsByTagName("componentplacement")
for componentplacementNode in componentplacementNodeList:
newComp = CC.Component(type='executabledevice')
newComp.name = componentplacementNode.getElementsByTagName("usagename")[0].firstChild.data
# componentinstantiation
# strip off the DCE: part of the id becuase it will get added back in later
tmpUUID = componentplacementNode.getElementsByTagName("componentinstantiation")[0].getAttribute("id")
newComp.uuid = str( tmpUUID ).strip("DCE:")
# componentfileref
tmpNode = componentplacementNode.getElementsByTagName("componentfileref")
newComp.file_uuid = str( tmpNode[0].getAttribute("refid") ).strip("DCE:") # is this strip necessary? -JDG
local_SPD = ""
componentfileNodeList = doc_dcd.getElementsByTagName("componentfile")
for componentfileNode in componentfileNodeList:
if componentfileNode.getAttribute("id") == newComp.file_uuid:
localfileNodeList = componentfileNode.getElementsByTagName("localfile")
local_SPD = localfileNodeList[0].getAttribute("name")
del localfileNodeList
break
pathSPD = parent.installPath + "dev/" + local_SPD
if not os.path.exists(pathSPD):
errorMsg(parent, "Warning! Could not find " + pathSPD + ".\nCannot import node " + Nname)
return None
doc_spd = xml.dom.minidom.parse(pathSPD)
softpkgNode = doc_spd.getElementsByTagName("softpkg")[0]
newComp.baseName = softpkgNode.getAttribute("name")
#pathSCD = "/sdr/sca/xml/"+newComp.baseName+"/"+doc_spd.softpkg.descriptor.localfile.name
localfileNode = softpkgNode.getElementsByTagName("localfile")[0]
pathSCD = parent.installPath + "dev" + localfileNode.getAttribute("name")
doc_scd = xml.dom.minidom.parse(pathSCD)
# Get the Ports
portsNodes = doc_scd.getElementsByTagName("ports")
for node in portsNodes:
providesPortsNodes = node.getElementsByTagName("provides")
usesPortsNodes = node.getElementsByTagName("uses")
# Provides ports
for node in providesPortsNodes:
tmpName = node.getAttribute("providesname")
tmpInt = getInterface( node.getAttribute("repid"), tmpName )
if tmpInt == None:
errorMsg(parent, "No repid found in ProvidesPort")
return None
portTypeNodeList = node.getElementsByTagName("porttype")
tmpType = portTypeNodeList[0].getAttribute("type")
newPort = CC.Port(tmpName,tmpInt,type='Provides',portType=tmpType)
newComp.ports.append(newPort)
# Uses ports
for node in usesPortsNodes:
tmpName = node.getAttribute("usesname")
tmpInt = getInterface( node.getAttribute("repid"), tmpName )
if tmpInt == None:
errorMsg(parent, "No repid fond in UsesPort")
return None
portTypeNodeList = node.getElementsByTagName("porttype")
tmpType = portTypeNodeList[0].getAttribute("type")
newPort = CC.Port(tmpName,tmpInt,type='Uses',portType=tmpType)
newComp.ports.append(newPort)
# Make sure that xml and code are not generated for this resource
newComp.generate = False
# Store the name of the file without the suffix (.scd.xml)
newComp.xmlName = os.path.splitext(os.path.splitext(os.path.basename(pathSCD))[0])[0]
newNode.Devices.append(newComp)
#
# Import the properties from the PRF file
#
# If there are no properties, just return the component as is
#if pathPRF == None:
# return newComp
#
#doc_prf = amara.parse(stripDoctype(prfPath))
##doc_prf = binderytools.bind_file(prfPath)
#if not hasattr(doc_prf,'properties'):
# errorMsg(parent,"Invalid file: " + prfPath)
# return None
#
#if hasattr(doc_prf.properties,"simple"):
# for s in doc_prf.properties.simple:
# p = getSimpleProperty(s)
# if p == None:
# #errorMsg(parent,"Invalid file: " + prfPath)
# continue
# newComp.properties.append(p)
#
#if hasattr(doc_prf.properties,"simplesequence"):
# for s in doc_prf.properties.simplesequence:
# p = getSimpleSequenceProperty(s)
# if p == None:
# #errorMsg(parent,"Invalid file: " + prfPath)
# continue
# newComp.properties.append(p)
return newNode
