def CheckTemp(lower_limit,upper_limit):
temp=WaterTemp()
if temp>upper_limit:
pin_ob=Pin()
num=pin_ob.number("WaterTempH")
print("WATER TOO HOT FOR PLANT")
GPIO.setup(num, GPIO.OUT)
GPIO.output(num, GPIO.HIGH)
if temp<lower_limit:
pin_ob=Pin()
num=pin_ob.number("WaterTempL")
print("Water is too cold")
GPIO.setup(num, GPIO.OUT)
GPIO.output(num, GPIO.HIGH)
#!/usr/bin/python
# Author: Saizenki
# Date: 14.08.2018
import RPi.GPIO as GPIO
from AllPin import Pin
pin_ob=Pin()
pin=pin_ob.number("ExFan")
print(pin)
GPIO.setwarnings(False)
GPIO.setmode(GPIO.BOARD)
GPIO.setup(pin, GPIO.OUT)
def FanOff():
#GPIO.output(pin, GPIO.HIGH)
GPIO.cleanup()
print("Exhaust Fan Off")
FanOff()
#!/usr/bin/python
# Author: Saizenki
# Date: 14.08.2018
import RPi.GPIO as GPIO
from AllPin import Pin
pin_ob = Pin()
pin = pin_ob.number("CirFan")
GPIO.setwarnings(False)
GPIO.setmode(GPIO.BOARD)
GPIO.setup(pin, GPIO.OUT)
def FanOn():
GPIO.output(pin, GPIO.LOW)
print("Circulation Fan On")
def FanOff():
GPIO.output(pin, GPIO.HIGH)
print("Circulation Fan Off")
GPIO.cleanup()
def __init__(self):
pin_ob = Pin()
num = pin_ob.number("Water_Level_Full")
GPIO.setwarnings(False)
GPIO.setmode(GPIO.BOARD)
GPIO.setup(num, GPIO.IN)
#!/usr/bin/python
# Author: Saizenki
# Date: 14.08.2018
import RPi.GPIO as GPIO
from AllPin import Pin
name = "Led"
pin_ob = Pin()
pin = pin_ob.number(name)
print(pin)
GPIO.setwarnings(False)
GPIO.setmode(GPIO.BOARD)
GPIO.setup(pin, GPIO.OUT)
def LedOn():
GPIO.output(pin, GPIO.LOW)
print("Led is On")
LedOn()
#!/usr/bin/python
# Author: Saizenki
# Date: 14.08.2018
import RPi.GPIO as GPIO
from AllPin import Pin
pin_ob = Pin()
pin = pin_ob.number("AirPump")
GPIO.setwarnings(False)
GPIO.setmode(GPIO.BOARD)
GPIO.setup(pin, GPIO.OUT)
def AirPumpOn():
GPIO.output(pin, GPIO.LOW)
print("Air Pump On")
def AirPumpOff():
GPIO.output(pin, GPIO.HIGH)
print("Air Pump Off")
GPIO.cleanup()
#sudo pip3 install Adafruit_DHT
#cd Adafruit_Python_DHT
#sudo python3 setup.py install
import Adafruit_DHT
from AllPin import Pin
sensor = Adafruit_DHT.DHT22
pin_num = Pin()
pin=pin_num("pine")
# Try to grab a sensor reading. Use the read_retry method which will retry up
# to 15 times to get a sensor reading (waiting 2 seconds between each retry).
humidity, temperature = Adafruit_DHT.read_retry(sensor, pin)
def temp:
return temperature
def humidity:
return humidity
if humidity is not None and temperature is not None:
print('Temp={0:0.1f}*C Humidity={1:0.1f}%'.format(temperature, humidity))
else:
print('Failed to get reading. Try again!')
