def join_s(x,y): try: JoinGeometryUtils.JoinGeometry(doc,x,y) JoinGeometryUtils.SwitchJoinOrder(doc,x,y) results = 1 except: results = 0 return results
def join(x,y): try: JoinGeometryUtils.JoinGeometry(doc,x,y) results = 1 except: results = 0 return results
def join_elements(self, elements_1, elements_2):
"Присоединяет геометрию элементов"
result = set()
rebar_cat = Category.GetCategory(self.doc,
BuiltInCategory.OST_Rebar).Name
elements_1 = [
i for i in elements_1 if i.element.Category.Name != rebar_cat
]
elements_2 = [
i for i in elements_2 if i.element.Category.Name != rebar_cat
]
for element_1 in elements_1:
for element_2 in elements_2:
try:
res = BooleanOperationsUtils.ExecuteBooleanOperation(
element_2.union_solid, element_1.union_solid,
BooleanOperationsType.Difference)
if res.Volume < element_2.union_solid.Volume:
result.add(element_1)
try:
if not JoinGeometryUtils.AreElementsJoined(
self.doc, element_2.element,
element_1.element):
JoinGeometryUtils.JoinGeometry(
self.doc, element_2.element,
element_1.element)
if not JoinGeometryUtils.IsCuttingElementInJoin(
self.doc, element_2.element,
element_1.element):
JoinGeometryUtils.SwitchJoinOrder(
self.doc, element_2.element,
element_1.element)
except:
# echo("Ошибка в объединении {} с {}".format(element_1, element_2))
pass
except InvalidOperationException:
result.add(element_1)
return result
def unjoin(pairs):
# print(pairs)
# rng = range(len(selection))
# checked_pairs = []
# joined_pairs = []
c = 0
# for x in rng:
# for y in rng:
# if x == y:
# continue
# _p = sorted([x,y])
# _t = (_p[0],_p[1])
# if _t in checked_pairs:
# continue
# checked_pairs.append(_t)
# eid1 = selection[_p[0]]
# eid2 = selection[_p[1]]
# e1,e2 = doc.GetElement(eid1),doc.GetElement(eid2)
# joined = JoinGeometryUtils.AreElementsJoined(doc,e1,e2)
# if joined:
# joined_pairs.append((e1,e2))
if len(pairs) > 0:
t = Transaction(doc)
t.Start("UnjoinSelected")
for p in pairs:
e1 = doc.GetElement(ElementId(p[0]))
e2 = doc.GetElement(ElementId(p[1]))
joined = JoinGeometryUtils.AreElementsJoined(doc, e1, e2)
if joined:
JoinGeometryUtils.UnjoinGeometry(doc, e1, e2)
c += 1
t.Commit()
TaskDialog.Show("R", "%d пар элементов разъединены" % c)
def multijoin(fam1, fam2, selected=False):
fam1 = fam1.lower()
fam2 = fam2.lower()
with rpw.db.Transaction("join {} and {}".format(fam1, fam2).upper()):
elements1 = get_elements(fam1, selected)
for e1 in elements1.get_elements():
bb = e1.BoundingBox[doc.ActiveView]
outline = Outline(bb.Min, bb.Max)
bbfilter = BoundingBoxIntersectsFilter(outline)
elements2 = get_elements(fam2, selected)
elements2.WherePasses(bbfilter)
for e2 in elements2:
try:
JoinGeometryUtils.JoinGeometry(doc, e1, e2)
except Autodesk.Revit.Exceptions.ArgumentException:
pass
def join_walls(collector):
if collector:
f_list = []
for element in collector:
group = []
element_box = element.get_BoundingBox(None)
if element_box:
outline = Outline(element_box.Min, element_box.Max)
bbfilter = BoundingBoxIntersectsFilter(outline)
wall_col = FilteredElementCollector(doc).OfClass(Wall).WherePasses(bbfilter).ToElements()
group.append(element)
wall_host = element.Host
for wall in wall_col:
group.append(wall)
try:
JoinGeometryUtils.JoinGeometry(doc, wall, wall_host)
except Exception:
pass
f_list.append(group)
return f_list
'Материал несущих конструкций').AsValueString()) or
(doc.GetElement(i.GetTypeId()).LookupParameter('м') and 'теплитель' in
doc.GetElement(i.GetTypeId()).LookupParameter('м').AsValueString())
]
for elem in walls + floors + generic + roofs:
minpoint = elem.get_BoundingBox(doc.ActiveView).Min
maxpoint = elem.get_BoundingBox(doc.ActiveView).Max
els = FilteredElementCollector(doc).OfCategory(
BuiltInCategory.OST_StructuralFraming).WherePasses(
BoundingBoxIntersectsFilter(Outline(
minpoint,
maxpoint))).WhereElementIsNotElementType().ToElements()
if res == "Соединить":
for el in els:
if not JoinGeometryUtils.AreElementsJoined(doc, el, elem):
JoinGeometryUtils.JoinGeometry(doc, el, elem)
elif res == "Отменить соединение":
for el in els:
if JoinGeometryUtils.AreElementsJoined(doc, el, elem):
JoinGeometryUtils.UnjoinGeometry(doc, el, elem)
else:
if len(sel) == 1:
target = sel[0]
cutting_ids = uidoc.Selection.PickObjects(
ObjectType.Element,
'Выберите элементы, которые будут вырезаны из целевого')
cutting_els = [doc.GetElement(elid.ElementId) for elid in cutting_ids]
for el in cutting_els:
if SolidSolidCutUtils.CanElementCutElement(target, el):
# return 'New name'
# def test():
# FORM.exEvent.Raise()
# handler = execute_rebar_set()
# exEvent = ExternalEvent.Create(handler)
# but_cancel.AddFunction(FORM.Close)
# but_create.AddFunction(test)
# FORM.Create(exEvent)
# coding: utf8
"""Выносим вид на лист"""
from Autodesk.Revit.DB import JoinGeometryUtils, Transaction
doc = __revit__.ActiveUIDocument.Document
echo(doc)
selection = [
doc.GetElement(elId)
for elId in __revit__.ActiveUIDocument.Selection.GetElementIds()
]
with Transaction(doc, "test") as t:
t.Start()
el1 = JoinGeometryUtils.GetJoinedElements(doc, selection[0])
echo(el1)
# el2 = selection[1]
# JoinGeometryUtils.SwitchJoinOrder(doc, el1, el2)
t.Commit()
#endregion #region main итерации, что-то можно заменить на генераторы списков для TransactionManager.Instance.EnsureInTransaction(doc) for i1 in items1: geomSolid = get_geometys(i1) if geomSolid != None: for ost in catIdlist: elems = FilteredElementCollector(doc,i_list_ids).OfCategoryId(ost).WhereElementIsNotElementType() elems_solid_filter = [] elems_solid_filter.append(elems.WherePasses(ElementIntersectsSolidFilter(geomSolid)).ToElements()) els_sol_fil_flat = flatten_List(elems_solid_filter) for els in els_sol_fil_flat: if els.Id.ToString() == i1.Id.ToString(): pass else: if JoinGeometryUtils.AreElementsJoined(doc,els,i1): pass else: results += join(els,i1) TransactionManager.Instance.ForceCloseTransaction() #endregion else: results = 0 #region разделение геометрии items1 = flatten_List(elements) TransactionManager.Instance.EnsureInTransaction(doc) for i in items1: test = JoinGeometryUtils.GetJoinedElements(doc, i) if test: for t in test: JoinGeometryUtils.UnjoinGeometry(doc,i,doc.GetElement(t))
output = pyrevit.output.get_output()
tab = ' '
# input ---------------------
cate = []
sel_warning = ()
outprint = script.get_output()
path = 'C:\\Users\\loum\\Documents\\Pyscripts\\ClashScripts\\'
# t = Transaction(doc, 'Correct Lines')
# t.Start()
if revit.doc.IsWorkshared:
warnings = doc.GetWarnings()
# select selected warnings
for warning in warnings:
selection = []
elementId = warning.GetFailingElements()
additionalId = warning.GetAdditionalElements()
text = warning.GetDescriptionText()
t = Transaction(doc, 'Unjoin Elements (STVTools)')
if 'joined but do not intersect' in text:
print('Found Warning')
for e in elementId:
print(doc.GetElement(e))
for a in additionalId:
print(doc.GetElement(a))
t.Start()
JoinGeometryUtils.UnjoinGeometry(doc, doc.GetElement(e), doc.GetElement(a))
t.Commit()
print('Success')
def UnjoinElement(element):
from Autodesk.Revit.DB import JoinGeometryUtils
joined = JoinGeometryUtils.GetJoinedElements(doc, element)
for e in joined:
secondElement = doc.GetElement(e)
JoinGeometryUtils.UnjoinGeometry(doc, element, secondElement)
checked_pairs = []
joined_pairs = []
c = 0
for x in rng:
for y in rng:
if x == y:
continue
_p = sorted([x,y])
_t = (_p[0],_p[1])
if _t in checked_pairs:
continue
checked_pairs.append(_t)
eid1 = selected_ids[_p[0]]
eid2 = selected_ids[_p[1]]
e1,e2 = doc.GetElement(eid1),doc.GetElement(eid2)
joined = JoinGeometryUtils.AreElementsJoined(doc,e1,e2)
if joined:
joined_pairs.append((e1,e2))
if len(joined_pairs) > 0:
t = Transaction(doc)
t.Start(__title__)
for p in joined_pairs:
JoinGeometryUtils.UnjoinGeometry(doc,p[0],p[1])
c+=1
t.Commit()
TaskDialog.Show(__title__,"%d pairs of elements unjoined" % c)
bbA.Min.Z, bbA.Max.Z, bbB.Min.Z, bbB.Max.Z)
output = []
for a in listA:
bbA = a.get_BoundingBox(None)
if not bbA is None:
for b in listB:
bbB = b.get_BoundingBox(None)
if not bbB is None:
if bbIntersect(bbA, bbB):
output.append([a, b])
c = 0
if len(selected_ids) > 0:
t = Transaction(doc)
t.Start(__title__)
for x in selected_ids:
for y in selected_ids:
try:
JoinGeometryUtils.JoinGeometry(doc, doc.GetElement(x),
doc.GetElement(y))
c += 1
except:
pass
t.Commit()
TaskDialog.Show(__title__, "%d pairs of elements unjoined" % c)
elements1 = get_elements(fam1, selected)
for e1 in elements1.elements:
bb = e1.BoundingBox[doc.ActiveView]
outline = Outline(bb.Min, bb.Max)
bbfilter = BoundingBoxIntersectsFilter(outline)
elements2 = get_elements(fam2, selected)
elements2.WherePasses(bbfilter)
for e2 in elements2:
try:
JoinGeometryUtils.JoinGeometry(doc, e1, e2)
except Autodesk.Revit.Exceptions.ArgumentException:
pass
components = [Label('Host Element ID:'),
TextBox('host_id'),
Label('Element IDs to be joined (comma separated):'),
TextBox('joined_ids'),
Button('Join')]
ff = FlexForm("Join by IDs", components)
ff.show()
if ff.values and ff.values['host_id']:
host_id = ff.values['host_id']
host_element = rpw.db.Element.from_int(int(host_id)).unwrap()
with rpw.db.Transaction('Join IDs {} with {}'.format(ff.values['joined_ids'], host_id)):
for eid in ff.values['joined_ids'].split(','):
joined_element = rpw.db.Element.from_int(int(eid)).unwrap()
JoinGeometryUtils.JoinGeometry(doc, host_element, joined_element)
for e in elementId:
lines.append(doc.GetElement(e))
elif 'Wall is slightly off axis' in text or 'Curve-Based Family is slightly off axis' in text:
for e in elementId:
walls.append(doc.GetElement(e))
allLines.append(lines)
allWalls.append(walls)
i = 0
for line in allLines:
t = Transaction(doc, 'Correct Lines')
t.Start()
for l in line:
#if l.Category.Name == '<Sketch>':
off_line = l.GeometryCurve
joined = JoinGeometryUtils.GetJoinedElements(doc, l)
for j in joined:
print(j)
sketchPlane = l.SketchPlane
correct_line = Warnings.CorrectLineXY(off_line, 0.08)
print(correct_line)
try:
try:
l.SetSketchPlaneAndCurve(sketchPlane, correct_line)
except:
l.SetGeometryCurve(correct_line, True)
except:
print('Curve Set Error')
'''
if joined:
for j in joined: