Python ParamBuildResponse Examples

Example #1

    def __init__(self, devId, param):
        ParamBuildResponse.__init__(self, Button, devId, param.getSwitchPubHz(devId))
        self._length = RES_LEN
        self._checkSum = 0
        self._port = param.getSwitchPort(devId)

        self._checkSum = self.calCheckSum(self.dataTosend())

Example #2

File: BatteryParamResponse.py Project: Itamare4/robotican

    def __init__(self, param):
        ParamBuildResponse.__init__(self, Battery, 0, param.getBatteryPubHz())
        self._length = MSG_LEN
        self._checkSum = 0
        self._voltageDividerRatio = param.getBatteryVoltageDividerRatio()

        self._checkSum = self.calCheckSum(self.dataTosend())

Example #3

File: gpsParamResponse.py Project: Itamare4/robotican

    def __init__(self, param):
        ParamBuildResponse.__init__(self, GPS, 0, param.getGpsPubHz())
        self._length = MSG_LEN
        self._checkSum = 0
        self._baudrate = param.getGpsBaudrate()

        self._checkSum = self.calCheckSum(self.dataTosend())

Example #4

File: closeLoopMotorBuildResponse.py Project: Itamare4/robotican

 def __init__(self, devId, param, type):
     ParamBuildResponse.__init__(self, type, devId, param.getCloseLoopMotorPubHz(devId))
     self._length = RES_LEN
     self._LPFHz = param.getCloseLoopMotorLPFHz(devId)
     self._LPFAlpha = param.getCloseLoopMotorLPFAlpha(devId)
     self._driverAddress = param.getCloseLoopMotorDriverAddress(devId)
     self._channel = param.getCloseLoopMotorChannel(devId)
     self._PIDHz = param.getCloseLoopMotorPIDHz(devId)
     self._KP = param.getCloseLoopMotorKp(devId)
     self._KI = param.getCloseLoopMotorKi(devId)
     self._KD = param.getCloseLoopMotorKd(devId)
     self._maxSpeed = param.getCloseLoopMotorMaxSpeed(devId)
     self._CPR = param.getCloseLoopMotorCpr(devId)
     self._timeout = param.getCloseLoopMotorTimeout(devId)
     self._timeout = param.getCloseLoopMotorTimeout(devId)
     self._limit = param.getCloseLoopMotorIntegralLimit(devId)
     port = param.getCloseLoopMotorEncoderPort(devId)
     if port == EN_PORT1:
         self._encoderPinA = 20
         self._encoderPinB = 21
     elif port == EN_PORT2:
         self._encoderPinA = 22
         self._encoderPinB = 23
     elif port == EN_PORT3:
         self._encoderPinA = 27
         self._encoderPinB = 28
     elif port == EN_PORT4:
         self._encoderPinA = 29
         self._encoderPinB = 30
     self._motorType = param.getCloseLoopMotorType(devId)
     self._motorDirection = param.getCloseLoopMotorDirection(devId)
     self._motorDirectionE = param.getCloseLoopMotorDirectionEncoder(devId)
     if param.getCloseLoopMotorEncoderType(devId) == 1:
         self._checkSum = 0
         self._checkSum = self.calCheckSum(self.dataTosend())

Example #5

    def __init__(self, type, devId, param):
        ParamBuildResponse.__init__(self, type, devId, param.getURFPubHz(devId))
        self._length = RES_LEN
        self._checkSum = 0
        self._portNum = param.getURFPort(devId)

        self._checkSum = self.calCheckSum(self.dataTosend())

Example #6

    def __init__(self, param):
        ParamBuildResponse.__init__(self, GPS, 0, param.getGpsPubHz())
        self._length = MSG_LEN
        self._checkSum = 0
        self._baudrate = param.getGpsBaudrate()

        self._checkSum = self.calCheckSum(self.dataTosend())

Example #7

    def __init__(self, param):
        ParamBuildResponse.__init__(self, Battery, 0, param.getBatteryPubHz())
        self._length = MSG_LEN
        self._checkSum = 0
        self._voltageDividerRatio = param.getBatteryVoltageDividerRatio()

        self._checkSum = self.calCheckSum(self.dataTosend())

Example #8

File: relayParamResponse.py Project: Itamare4/robotican

    def __init__(self, devId , param):
        ParamBuildResponse.__init__(self, Rely, devId, 0)
        self._length = MSG_LEN
        self._checkSum = 0

        self._port = param.getRelayPort(devId)

        self._checkSum = self.calCheckSum(self.dataTosend())

Example #9

File: switchParamResponse.py Project: yossi2010/robotican

    def __init__(self, devId, param):
        ParamBuildResponse.__init__(self, Button, devId,
                                    param.getSwitchPubHz(devId))
        self._length = RES_LEN
        self._checkSum = 0
        self._port = param.getSwitchPort(devId)

        self._checkSum = self.calCheckSum(self.dataTosend())

Example #10

File: relayParamResponse.py Project: yossi2010/robotican

    def __init__(self, devId, param):
        ParamBuildResponse.__init__(self, Rely, devId, 0)
        self._length = MSG_LEN
        self._checkSum = 0

        self._port = param.getRelayPort(devId)

        self._checkSum = self.calCheckSum(self.dataTosend())

Example #11

File: IMUParamResponse.py Project: nirlevi5/bgumodo_ws

    def __init__(self, param):
        ParamBuildResponse.__init__(self, IMU, 0, param.getIMUPubHz())
        self._length = RES_LEN
        self._checkSum = 0

        self._camp = param.getIMUCamp()
        self._fusionHz = param.getIMUFusionHz()

        self._checkSum = self.calCheckSum(self.dataTosend())

Example #12

    def __init__(self, switchNum, param):
        ParamBuildResponse.__init__(self, EmergencySwitch, switchNum, 0)
        self._length = MSG_LEN
        self._checkSum = 0

        self._listenToPin = param.getEmergencyPin(switchNum)
        self._status = param.getEmergencyState(switchNum)

        self._checkSum = self.calCheckSum(self.dataTosend())

Example #13

 def __init__(self, devId, param):
     ParamBuildResponse.__init__(self, DiffDriverCL, devId, param.getCloseDiffPubHz())
     self._length = MSG_LEN
     self._checkSum = 0
     self._rWheel = param.getCloseDiffRWheel()
     self._width = param.getCloseDiffWidth()
     self._motorL = param.getCloseDiffMotorL()
     self._motorR = param.getCloseDiffMotorR()
     self._slip = param.getCloseDiffSlip()
     self._checkSum = self.calCheckSum(self.dataTosend())

Example #14

    def __init__(self, devId, param):
        ParamBuildResponse.__init__(self, EngineOL, devId, 0)
        self._length = MSG_LEN
        self._checkSum = 0
        self._address = param.getOpenLoopAddress(devId)
        self._channel = param.getOpenLoopChannel(devId)
        self._timeout = param.getOpenLoopTimeout(devId)
        self._max = param.getOpenLoopMax(devId)

        self._checkSum = self.calCheckSum(self.dataTosend())

Example #15

    def __init__(self, param):
        ParamBuildResponse.__init__(self, IMU, 0, param.getIMUPubHz())
        self._length = RES_LEN
        self._checkSum = 0

        self._camp = param.getIMUCamp()
        self._fusionHz = param.getIMUFusionHz()
        self._enableFuseGyro = param.isIMUFuseGyro()

        self._checkSum = self.calCheckSum(self.dataTosend())

Example #16

 def __init__(self, devId, param):
     ParamBuildResponse.__init__(self, DiffDriverCL, devId,
                                 param.getCloseDiffPubHz())
     self._length = MSG_LEN
     self._checkSum = 0
     self._rWheel = param.getCloseDiffRWheel()
     self._width = param.getCloseDiffWidth()
     self._motorL = param.getCloseDiffMotorL()
     self._motorR = param.getCloseDiffMotorR()
     self._slip = param.getCloseDiffSlip()
     self._checkSum = self.calCheckSum(self.dataTosend())

Example #17

    def __init__(self, devId, param):
        ParamBuildResponse.__init__(self, SERVO, devId, param.getServoPublishHz(devId))
        self._length = SERVO_LEN_MSG
        self._port = param.getServoPort(devId)
        self._min = param.getServoMin(devId)
        self._max = param.getServoMax(devId)
        self._a = param.getServoAParameter(devId)
        self._b = param.getServoBParameter(devId)
        self._initPos = param.getServoInitMove(devId)

        self._checkSum = 0
        self._checkSum = self.calCheckSum(self.dataTosend())

Example #18

    def __init__(self, devId, param):
        ParamBuildResponse.__init__(self, SERVO, devId, param.getServoPublishHz(devId))
        self._length = SERVO_LEN_MSG
        self._port = param.getServoPort(devId)
        self._min = param.getServoMin(devId)
        self._max = param.getServoMax(devId)
        self._a = param.getServoAParameter(devId)
        self._b = param.getServoBParameter(devId)
        self._initPos = param.getServoInitMove(devId)

        self._checkSum = 0
        self._checkSum = self.calCheckSum(self.dataTosend())

Example #19

 def dataTosend(self):
     return ParamBuildResponse.dataTosend(self) \
            + struct.pack('<f', self._rWheel) \
            + struct.pack('<f', self._width) \
            + struct.pack('<i', self._motorL) \
            + struct.pack('<i', self._motorR) \
            + struct.pack('<f', self._slip)

Example #20

 def dataTosend(self):
     return ParamBuildResponse.dataTosend(self) \
            + struct.pack('<f', self._rWheel) \
            + struct.pack('<f', self._width) \
            + struct.pack('<i', self._motorL) \
            + struct.pack('<i', self._motorR) \
            + struct.pack('<f', self._slip)

Example #21

 def dataTosend(self):
     return ParamBuildResponse.dataTosend(self)\
            + struct.pack('<i', self._port)\
            + struct.pack('<f', self._min)\
            + struct.pack('<f', self._max)\
            + struct.pack('<f', self._a)\
            + struct.pack('<f', self._b)\
            + struct.pack('<f', self._initPos)

Example #22

 def dataTosend(self):
     return ParamBuildResponse.dataTosend(self)\
            + struct.pack('<i', self._port)\
            + struct.pack('<f', self._min)\
            + struct.pack('<f', self._max)\
            + struct.pack('<f', self._a)\
            + struct.pack('<f', self._b)\
            + struct.pack('<f', self._initPos)

Example #23

File: closeDiffFourParamResponse.py Project: nirlevi5/bgumodo_ws

 def dataTosend(self):
     return (
         ParamBuildResponse.dataTosend(self)
         + struct.pack("<f", self._rWheel)
         + struct.pack("<f", self._width)
         + struct.pack("<i", self._motorFL)
         + struct.pack("<i", self._motorFR)
         + struct.pack("<i", self._motorBL)
         + struct.pack("<i", self._motorBR)
         + struct.pack("<f", self._slip)
     )

Example #24

File: closeLoopMotorBuildResponse.py Project: yossi2010/robotican

 def __init__(self, devId, param, type):
     ParamBuildResponse.__init__(self, type, devId,
                                 param.getCloseLoopMotorPubHz(devId))
     self._length = RES_LEN
     self._LPFHz = param.getCloseLoopMotorLPFHz(devId)
     self._LPFAlpha = param.getCloseLoopMotorLPFAlpha(devId)
     self._driverAddress = param.getCloseLoopMotorDriverAddress(devId)
     self._channel = param.getCloseLoopMotorChannel(devId)
     self._PIDHz = param.getCloseLoopMotorPIDHz(devId)
     self._KP = param.getCloseLoopMotorKp(devId)
     self._KI = param.getCloseLoopMotorKi(devId)
     self._KD = param.getCloseLoopMotorKd(devId)
     self._maxSpeed = param.getCloseLoopMotorMaxSpeed(devId)
     self._CPR = param.getCloseLoopMotorCpr(devId)
     self._timeout = param.getCloseLoopMotorTimeout(devId)
     self._timeout = param.getCloseLoopMotorTimeout(devId)
     self._limit = param.getCloseLoopMotorIntegralLimit(devId)
     port = param.getCloseLoopMotorEncoderPort(devId)
     if port == EN_PORT1:
         self._encoderPinA = 20
         self._encoderPinB = 21
     elif port == EN_PORT2:
         self._encoderPinA = 22
         self._encoderPinB = 23
     elif port == EN_PORT3:
         self._encoderPinA = 27
         self._encoderPinB = 28
     elif port == EN_PORT4:
         self._encoderPinA = 29
         self._encoderPinB = 30
     self._motorType = param.getCloseLoopMotorType(devId)
     self._motorDirection = param.getCloseLoopMotorDirection(devId)
     self._motorDirectionE = param.getCloseLoopMotorDirectionEncoder(devId)
     if param.getCloseLoopMotorEncoderType(devId) == 1:
         self._checkSum = 0
         self._checkSum = self.calCheckSum(self.dataTosend())

Example #25

File: closeLoopMotorBuildResponse.py Project: Itamare4/robotican

 def dataTosend(self):
     return ParamBuildResponse.dataTosend(self) \
            + struct.pack('<I', self._LPFHz) \
            + struct.pack('<f', self._LPFAlpha) \
            + struct.pack('<I', self._driverAddress) \
            + struct.pack('<I', self._channel) \
            + struct.pack('<I', self._PIDHz) \
            + struct.pack('<f', self._KP) \
            + struct.pack('<f', self._KI) \
            + struct.pack('<f', self._KD) \
            + struct.pack('<f', self._maxSpeed) \
            + struct.pack('<I', self._CPR) \
            + struct.pack('<I', self._timeout) \
            + struct.pack('<I', self._encoderPinA) \
            + struct.pack('<I', self._encoderPinB) \
            + struct.pack('<I', self._motorType) \
            + struct.pack('<i', self._motorDirection) \
            + struct.pack('<i', self._motorDirectionE) \
            + struct.pack('<f', self._limit)

Example #26

File: closeLoopMotorBuildResponse.py Project: yossi2010/robotican

 def dataTosend(self):
     return ParamBuildResponse.dataTosend(self) \
            + struct.pack('<I', self._LPFHz) \
            + struct.pack('<f', self._LPFAlpha) \
            + struct.pack('<I', self._driverAddress) \
            + struct.pack('<I', self._channel) \
            + struct.pack('<I', self._PIDHz) \
            + struct.pack('<f', self._KP) \
            + struct.pack('<f', self._KI) \
            + struct.pack('<f', self._KD) \
            + struct.pack('<f', self._maxSpeed) \
            + struct.pack('<I', self._CPR) \
            + struct.pack('<I', self._timeout) \
            + struct.pack('<I', self._encoderPinA) \
            + struct.pack('<I', self._encoderPinB) \
            + struct.pack('<I', self._motorType) \
            + struct.pack('<i', self._motorDirection) \
            + struct.pack('<i', self._motorDirectionE) \
            + struct.pack('<f', self._limit)

Example #27

File: relayParamResponse.py Project: Itamare4/robotican

 def dataTosend(self):
     return ParamBuildResponse.dataTosend(self) + struct.pack('<i', self._port)

Example #28

 def dataTosend(self):
     return ParamBuildResponse.dataTosend(self) \
            + struct.pack('<B', self._listenToPin) \
            + struct.pack('<B', self._status)

Example #29

File: IMUParamResponse.py Project: nirlevi5/bgumodo_ws

 def dataTosend(self):
     return ParamBuildResponse.dataTosend(self)\
            + struct.pack('<f', self._camp) \
            + struct.pack('<H', self._fusionHz)

Example #30

 def dataTosend(self):
     return ParamBuildResponse.dataTosend(self)\
            + struct.pack('<f', self._camp) \
            + struct.pack('<H', self._fusionHz)\
            + struct.pack('<?', self._enableFuseGyro)

Example #31

 def __init__(self, param):
     ParamBuildResponse.__init__(self, PPM, 0, param.getPPMPubHz())
     self._length = MSG_LEN
     self._checkSum = 0
     self._checkSum = self.calCheckSum(self.dataTosend())

Example #32

 def dataTosend(self):
     return ParamBuildResponse.dataTosend(self) \
            + struct.pack('<I', self._address) \
            + struct.pack('<I', self._channel) \
            + struct.pack('<I', self._timeout) \
            + struct.pack('<i', self._max)

Example #33

 def dataTosend(self):
     return ParamBuildResponse.dataTosend(self) + struct.pack('<i', self._portNum)

Example #34

 def dataTosend(self):
     return ParamBuildResponse.dataTosend(self) + struct.pack(
         '<i', self._baudrate)

Example #35

File: ppmParamResponse.py Project: yossi2010/robotican

 def __init__(self, param):
     ParamBuildResponse.__init__(self, PPM, 0, param.getPPMPubHz())
     self._length = MSG_LEN
     self._checkSum = 0
     self._checkSum = self.calCheckSum(self.dataTosend())

Example #36

File: BatteryParamResponse.py Project: Itamare4/robotican

 def dataTosend(self):
     return ParamBuildResponse.dataTosend(self) \
            + struct.pack('<f', self._voltageDividerRatio)

Example #37

 def dataTosend(self):
     return ParamBuildResponse.dataTosend(self) \
            + struct.pack('<f', self._voltageDividerRatio)