def __init__(self):
super(printWindow, self).__init__(None, -1, title='Printing')
self.machineCom = None
self.gcode = None
self.gcodeList = None
self.sendList = []
self.temp = None
self.bedTemp = None
self.bufferLineCount = 4
self.sendCnt = 0
self.feedrateRatioOuterWall = 1.0
self.feedrateRatioInnerWall = 1.0
self.feedrateRatioFill = 1.0
self.feedrateRatioSupport = 1.0
self.pause = False
self.termHistory = []
self.termHistoryIdx = 0
self.cam = None
if webcam.hasWebcamSupport():
self.cam = webcam.webcam()
if not self.cam.hasCamera():
self.cam = None
self.SetSizer(wx.BoxSizer())
self.panel = wx.Panel(self)
self.GetSizer().Add(self.panel, 1, flag=wx.EXPAND)
self.sizer = wx.GridBagSizer(2, 2)
self.panel.SetSizer(self.sizer)
sb = wx.StaticBox(self.panel, label="Statistics")
boxsizer = wx.StaticBoxSizer(sb, wx.VERTICAL)
self.powerWarningText = wx.StaticText(parent=self.panel,
id=-1,
label="Your computer is running on battery power.\nConnect your computer to AC power or your print might not finish.",
style=wx.ALIGN_CENTER)
self.powerWarningText.SetBackgroundColour('red')
self.powerWarningText.SetForegroundColour('white')
boxsizer.AddF(self.powerWarningText, flags=wx.SizerFlags().Expand().Border(wx.BOTTOM, 10))
self.powerManagement = power.PowerManagement()
self.powerWarningTimer = wx.Timer(self)
self.Bind(wx.EVT_TIMER, self.OnPowerWarningChange, self.powerWarningTimer)
self.OnPowerWarningChange(None)
self.powerWarningTimer.Start(10000)
self.statsText = wx.StaticText(self.panel, -1,
"Filament: ####.##m #.##g\nEstimated print time: #####:##\nMachine state:\nDetecting baudrateXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX")
boxsizer.Add(self.statsText, flag=wx.LEFT, border=5)
self.sizer.Add(boxsizer, pos=(0, 0), span=(7, 1), flag=wx.EXPAND)
self.connectButton = wx.Button(self.panel, -1, 'Connect')
#self.loadButton = wx.Button(self.panel, -1, 'Load')
self.printButton = wx.Button(self.panel, -1, 'Print')
self.pauseButton = wx.Button(self.panel, -1, 'Pause')
self.cancelButton = wx.Button(self.panel, -1, 'Cancel print')
self.machineLogButton = wx.Button(self.panel, -1, 'Error log')
self.progress = wx.Gauge(self.panel, -1)
self.sizer.Add(self.connectButton, pos=(1, 1), flag=wx.EXPAND)
#self.sizer.Add(self.loadButton, pos=(1,1), flag=wx.EXPAND)
self.sizer.Add(self.printButton, pos=(2, 1), flag=wx.EXPAND)
self.sizer.Add(self.pauseButton, pos=(3, 1), flag=wx.EXPAND)
self.sizer.Add(self.cancelButton, pos=(4, 1), flag=wx.EXPAND)
self.sizer.Add(self.machineLogButton, pos=(5, 1), flag=wx.EXPAND)
self.sizer.Add(self.progress, pos=(7, 0), span=(1, 7), flag=wx.EXPAND)
nb = wx.Notebook(self.panel)
self.sizer.Add(nb, pos=(0, 2), span=(7, 4), flag=wx.EXPAND)
self.temperaturePanel = wx.Panel(nb)
sizer = wx.GridBagSizer(2, 2)
self.temperaturePanel.SetSizer(sizer)
self.temperatureSelect = wx.SpinCtrl(self.temperaturePanel, -1, '0', size=(21 * 3, 21), style=wx.SP_ARROW_KEYS)
self.temperatureSelect.SetRange(0, 400)
self.bedTemperatureLabel = wx.StaticText(self.temperaturePanel, -1, "BedTemp:")
self.bedTemperatureSelect = wx.SpinCtrl(self.temperaturePanel, -1, '0', size=(21 * 3, 21),
style=wx.SP_ARROW_KEYS)
self.bedTemperatureSelect.SetRange(0, 400)
self.bedTemperatureLabel.Show(False)
self.bedTemperatureSelect.Show(False)
self.temperatureGraph = temperatureGraph(self.temperaturePanel)
sizer.Add(wx.StaticText(self.temperaturePanel, -1, "Temp:"), pos=(0, 0))
sizer.Add(self.temperatureSelect, pos=(0, 1))
sizer.Add(self.bedTemperatureLabel, pos=(1, 0))
sizer.Add(self.bedTemperatureSelect, pos=(1, 1))
sizer.Add(self.temperatureGraph, pos=(2, 0), span=(1, 2), flag=wx.EXPAND)
sizer.AddGrowableRow(2)
sizer.AddGrowableCol(1)
nb.AddPage(self.temperaturePanel, 'Temp')
self.directControlPanel = wx.Panel(nb)
sizer = wx.GridBagSizer(2, 2)
self.directControlPanel.SetSizer(sizer)
sizer.Add(PrintCommandButton(self, ['G91', 'G1 Y100 F6000', 'G90'], 'print-move-y100.png'), pos=(0, 3))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 Y10 F6000', 'G90'], 'print-move-y10.png'), pos=(1, 3))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 Y1 F6000', 'G90'], 'print-move-y1.png'), pos=(2, 3))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 Y-1 F6000', 'G90'], 'print-move-y-1.png'), pos=(4, 3))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 Y-10 F6000', 'G90'], 'print-move-y-10.png'), pos=(5, 3))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 Y-100 F6000', 'G90'], 'print-move-y-100.png'), pos=(6, 3))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 X-100 F6000', 'G90'], 'print-move-x-100.png'), pos=(3, 0))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 X-10 F6000', 'G90'], 'print-move-x-10.png'), pos=(3, 1))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 X-1 F6000', 'G90'], 'print-move-x-1.png'), pos=(3, 2))
sizer.Add(PrintCommandButton(self, ['G28 X0 Y0'], 'print-move-home.png'), pos=(3, 3))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 X1 F6000', 'G90'], 'print-move-x1.png'), pos=(3, 4))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 X10 F6000', 'G90'], 'print-move-x10.png'), pos=(3, 5))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 X100 F6000', 'G90'], 'print-move-x100.png'), pos=(3, 6))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 Z10 F200', 'G90'], 'print-move-z10.png'), pos=(0, 8))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 Z1 F200', 'G90'], 'print-move-z1.png'), pos=(1, 8))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 Z0.1 F200', 'G90'], 'print-move-z0.1.png'), pos=(2, 8))
sizer.Add(PrintCommandButton(self, ['G28 Z0'], 'print-move-home.png'), pos=(3, 8))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 Z-0.1 F200', 'G90'], 'print-move-z-0.1.png'), pos=(4, 8))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 Z-1 F200', 'G90'], 'print-move-z-1.png'), pos=(5, 8))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 Z-10 F200', 'G90'], 'print-move-z-10.png'), pos=(6, 8))
sizer.Add(PrintCommandButton(self, ['G92 E0', 'G1 E2 F120'], 'extrude.png', size=(60, 20)), pos=(1, 10),
span=(1, 3), flag=wx.EXPAND)
sizer.Add(PrintCommandButton(self, ['G92 E0', 'G1 E-2 F120'], 'retract.png', size=(60, 20)), pos=(2, 10),
span=(1, 3), flag=wx.EXPAND)
nb.AddPage(self.directControlPanel, 'Jog')
self.speedPanel = wx.Panel(nb)
sizer = wx.GridBagSizer(2, 2)
self.speedPanel.SetSizer(sizer)
self.outerWallSpeedSelect = wx.SpinCtrl(self.speedPanel, -1, '100', size=(21 * 3, 21), style=wx.SP_ARROW_KEYS)
self.outerWallSpeedSelect.SetRange(5, 1000)
self.innerWallSpeedSelect = wx.SpinCtrl(self.speedPanel, -1, '100', size=(21 * 3, 21), style=wx.SP_ARROW_KEYS)
self.innerWallSpeedSelect.SetRange(5, 1000)
self.fillSpeedSelect = wx.SpinCtrl(self.speedPanel, -1, '100', size=(21 * 3, 21), style=wx.SP_ARROW_KEYS)
self.fillSpeedSelect.SetRange(5, 1000)
self.supportSpeedSelect = wx.SpinCtrl(self.speedPanel, -1, '100', size=(21 * 3, 21), style=wx.SP_ARROW_KEYS)
self.supportSpeedSelect.SetRange(5, 1000)
sizer.Add(wx.StaticText(self.speedPanel, -1, "Outer wall:"), pos=(0, 0))
sizer.Add(self.outerWallSpeedSelect, pos=(0, 1))
sizer.Add(wx.StaticText(self.speedPanel, -1, "%"), pos=(0, 2))
sizer.Add(wx.StaticText(self.speedPanel, -1, "Inner wall:"), pos=(1, 0))
sizer.Add(self.innerWallSpeedSelect, pos=(1, 1))
sizer.Add(wx.StaticText(self.speedPanel, -1, "%"), pos=(1, 2))
sizer.Add(wx.StaticText(self.speedPanel, -1, "Fill:"), pos=(2, 0))
sizer.Add(self.fillSpeedSelect, pos=(2, 1))
sizer.Add(wx.StaticText(self.speedPanel, -1, "%"), pos=(2, 2))
sizer.Add(wx.StaticText(self.speedPanel, -1, "Support:"), pos=(3, 0))
sizer.Add(self.supportSpeedSelect, pos=(3, 1))
sizer.Add(wx.StaticText(self.speedPanel, -1, "%"), pos=(3, 2))
nb.AddPage(self.speedPanel, 'Speed')
self.termPanel = wx.Panel(nb)
sizer = wx.GridBagSizer(2, 2)
self.termPanel.SetSizer(sizer)
f = wx.Font(8, wx.FONTFAMILY_MODERN, wx.FONTSTYLE_NORMAL, wx.FONTWEIGHT_NORMAL, False)
self.termLog = wx.TextCtrl(self.termPanel, style=wx.TE_MULTILINE | wx.TE_DONTWRAP)
self.termLog.SetFont(f)
self.termLog.SetEditable(0)
self.termInput = wx.TextCtrl(self.termPanel, style=wx.TE_PROCESS_ENTER)
self.termInput.SetFont(f)
sizer.Add(self.termLog, pos=(0, 0), flag=wx.EXPAND)
sizer.Add(self.termInput, pos=(1, 0), flag=wx.EXPAND)
sizer.AddGrowableCol(0)
sizer.AddGrowableRow(0)
nb.AddPage(self.termPanel, 'Term')
if self.cam != None:
self.camPage = wx.Panel(nb)
sizer = wx.GridBagSizer(2, 2)
self.camPage.SetSizer(sizer)
self.timelapsEnable = wx.CheckBox(self.camPage, -1, 'Enable timelapse movie recording')
sizer.Add(self.timelapsEnable, pos=(0, 0), span=(1, 2), flag=wx.EXPAND)
pages = self.cam.propertyPages()
self.cam.buttons = [self.timelapsEnable]
for page in pages:
button = wx.Button(self.camPage, -1, page)
button.index = pages.index(page)
sizer.Add(button, pos=(1, pages.index(page)))
button.Bind(wx.EVT_BUTTON, self.OnPropertyPageButton)
self.cam.buttons.append(button)
self.campreviewEnable = wx.CheckBox(self.camPage, -1, 'Show preview')
sizer.Add(self.campreviewEnable, pos=(2, 0), span=(1, 2), flag=wx.EXPAND)
self.camPreview = wx.Panel(self.camPage)
sizer.Add(self.camPreview, pos=(3, 0), span=(1, 2), flag=wx.EXPAND)
nb.AddPage(self.camPage, 'Camera')
self.camPreview.timer = wx.Timer(self)
self.Bind(wx.EVT_TIMER, self.OnCameraTimer, self.camPreview.timer)
self.camPreview.timer.Start(500)
self.camPreview.Bind(wx.EVT_ERASE_BACKGROUND, self.OnCameraEraseBackground)
self.sizer.AddGrowableRow(6)
self.sizer.AddGrowableCol(3)
self.Bind(wx.EVT_CLOSE, self.OnClose)
self.connectButton.Bind(wx.EVT_BUTTON, self.OnConnect)
#self.loadButton.Bind(wx.EVT_BUTTON, self.OnLoad)
self.printButton.Bind(wx.EVT_BUTTON, self.OnPrint)
self.pauseButton.Bind(wx.EVT_BUTTON, self.OnPause)
self.cancelButton.Bind(wx.EVT_BUTTON, self.OnCancel)
self.machineLogButton.Bind(wx.EVT_BUTTON, self.OnMachineLog)
self.Bind(wx.EVT_SPINCTRL, self.OnTempChange, self.temperatureSelect)
self.Bind(wx.EVT_SPINCTRL, self.OnBedTempChange, self.bedTemperatureSelect)
self.Bind(wx.EVT_SPINCTRL, self.OnSpeedChange, self.outerWallSpeedSelect)
self.Bind(wx.EVT_SPINCTRL, self.OnSpeedChange, self.innerWallSpeedSelect)
self.Bind(wx.EVT_SPINCTRL, self.OnSpeedChange, self.fillSpeedSelect)
self.Bind(wx.EVT_SPINCTRL, self.OnSpeedChange, self.supportSpeedSelect)
self.Bind(wx.EVT_TEXT_ENTER, self.OnTermEnterLine, self.termInput)
self.termInput.Bind(wx.EVT_CHAR, self.OnTermKey)
self.Layout()
self.Fit()
self.Centre()
self.statsText.SetMinSize(self.statsText.GetSize())
self.UpdateButtonStates()
def __init__(self):
"""
Creates the window which controls the printing process
"""
super(printWindow, self).__init__(None, -1, title=_("Printing"))
t = time.time()
self.machineCom = None
self.gcode = None
self.gcodeList = None
self.sendList = []
self.temp = None
self.bedTemp = None
self.bufferLineCount = 4
self.sendCnt = 0
self.feedrateRatioOuterWall = 1.0
self.feedrateRatioInnerWall = 1.0
self.feedrateRatioFill = 1.0
self.feedrateRatioSupport = 1.0
self.pause = False
self.termHistory = []
self.termHistoryIdx = 0
self.cam = None
self.height = profile.getMachineSettingFloat('machine_height')
self.width = profile.getMachineSettingFloat('machine_width')
self.depth = profile.getMachineSettingFloat('machine_depth')
self.SetSizer(wx.BoxSizer())
self.panel = wx.Panel(self)
self.GetSizer().Add(self.panel, 1, flag=wx.EXPAND)
self.sizer = wx.GridBagSizer(2, 2)
self.panel.SetSizer(self.sizer)
sb = wx.StaticBox(self.panel, label=_("Statistics"))
boxsizer = wx.StaticBoxSizer(sb, wx.VERTICAL)
self.powerWarningText = wx.StaticText(parent=self.panel,
id=-1,
label=_("Your computer is running on battery power.\nConnect your computer to AC power or your print might not finish."),
style=wx.ALIGN_CENTER)
self.powerWarningText.SetBackgroundColour('red')
self.powerWarningText.SetForegroundColour('white')
boxsizer.AddF(self.powerWarningText, flags=wx.SizerFlags().Expand().Border(wx.BOTTOM, 10))
self.powerManagement = power.PowerManagement()
self.powerWarningTimer = wx.Timer(self)
self.Bind(wx.EVT_TIMER, self.OnPowerWarningChange, self.powerWarningTimer)
self.OnPowerWarningChange(None)
self.powerWarningTimer.Start(10000)
self.statsText = wx.StaticText(self.panel, -1, _("Filament: ####.##m #.##g\nEstimated print time: #####:##\nMachine state:\nDetecting baudrateXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX"))
boxsizer.Add(self.statsText, flag=wx.LEFT, border=5)
self.sizer.Add(boxsizer, pos=(0, 0), span=(7, 1), flag=wx.EXPAND)
self.connectButton = wx.Button(self.panel, -1, _("Connect"))
#self.loadButton = wx.Button(self.panel, -1, 'Load')
self.printButton = wx.Button(self.panel, -1, _("Print"))
self.pauseButton = wx.Button(self.panel, -1, _("Pause"))
self.elevateButton = wx.Button(self.panel, -1, _("Elevate"))
self.cancelButton = wx.Button(self.panel, -1, _("Cancel print"))
self.machineLogButton = wx.Button(self.panel, -1, _("Error log"))
self.progress = wx.Gauge(self.panel, -1)
self.sizer.Add(self.connectButton, pos=(1, 1), flag=wx.EXPAND)
#self.sizer.Add(self.loadButton, pos=(1,1), flag=wx.EXPAND)
self.sizer.Add(self.printButton, pos=(2, 1), flag=wx.EXPAND)
self.sizer.Add(self.pauseButton, pos=(3, 1), flag=wx.EXPAND)
self.sizer.Add(self.elevateButton, pos=(4, 1), flag=wx.EXPAND)
self.sizer.Add(self.cancelButton, pos=(5, 1), flag=wx.EXPAND)
self.sizer.Add(self.machineLogButton, pos=(6, 1), flag=wx.EXPAND)
self.sizer.Add(self.progress, pos=(7, 0), span=(1, 7), flag=wx.EXPAND)
nb = wx.Notebook(self.panel)
self.tabs = nb
self.sizer.Add(nb, pos=(0, 2), span=(7, 4), flag=wx.EXPAND)
self.temperaturePanel = wx.Panel(nb)
sizer = wx.GridBagSizer(2, 2)
self.temperaturePanel.SetSizer(sizer)
self.temperatureSelect = wx.SpinCtrl(self.temperaturePanel, -1, '0', size=(21 * 3, 21), style=wx.SP_ARROW_KEYS)
self.temperatureSelect.SetRange(0, 400)
self.temperatureHeatUp = wx.Button(self.temperaturePanel, -1, str(int(profile.getProfileSettingFloat('print_temperature'))) + 'C')
self.bedTemperatureLabel = wx.StaticText(self.temperaturePanel, -1, _("BedTemp:"))
self.bedTemperatureSelect = wx.SpinCtrl(self.temperaturePanel, -1, '0', size=(21 * 3, 21), style=wx.SP_ARROW_KEYS)
self.bedTemperatureSelect.SetRange(0, 400)
self.bedTemperatureLabel.Show(False)
self.bedTemperatureSelect.Show(False)
self.temperatureGraph = temperatureGraph(self.temperaturePanel)
sizer.Add(wx.StaticText(self.temperaturePanel, -1, _("Temp:")), pos=(0, 0))
sizer.Add(self.temperatureSelect, pos=(0, 1))
sizer.Add(self.temperatureHeatUp, pos=(0, 2))
sizer.Add(self.bedTemperatureLabel, pos=(1, 0))
sizer.Add(self.bedTemperatureSelect, pos=(1, 1))
sizer.Add(self.temperatureGraph, pos=(2, 0), span=(1, 3), flag=wx.EXPAND)
sizer.AddGrowableRow(2)
sizer.AddGrowableCol(2)
nb.AddPage(self.temperaturePanel, 'Temp')
self.directControlPanel = wx.Panel(nb)
sizer = wx.GridBagSizer(2, 2)
self.directControlPanel.SetSizer(sizer)
sizer.Add(PrintCommandButton(self, ['G91', 'G1 Y100 F6000', 'G90'], 'print-move-y100.png'), pos=(0, 3))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 Y10 F6000', 'G90'], 'print-move-y10.png'), pos=(1, 3))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 Y1 F6000', 'G90'], 'print-move-y1.png'), pos=(2, 3))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 Y-1 F6000', 'G90'], 'print-move-y-1.png'), pos=(4, 3))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 Y-10 F6000', 'G90'], 'print-move-y-10.png'), pos=(5, 3))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 Y-100 F6000', 'G90'], 'print-move-y-100.png'), pos=(6, 3))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 X-100 F6000', 'G90'], 'print-move-x-100.png'), pos=(3, 0))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 X-10 F6000', 'G90'], 'print-move-x-10.png'), pos=(3, 1))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 X-1 F6000', 'G90'], 'print-move-x-1.png'), pos=(3, 2))
sizer.Add(PrintCommandButton(self, ['G28 X0 Y0'], 'print-move-home.png'), pos=(3, 3))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 X1 F6000', 'G90'], 'print-move-x1.png'), pos=(3, 4))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 X10 F6000', 'G90'], 'print-move-x10.png'), pos=(3, 5))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 X100 F6000', 'G90'], 'print-move-x100.png'), pos=(3, 6))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 Z10 F200', 'G90'], 'print-move-z10.png'), pos=(0, 8))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 Z1 F200', 'G90'], 'print-move-z1.png'), pos=(1, 8))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 Z0.1 F200', 'G90'], 'print-move-z0.1.png'), pos=(2, 8))
sizer.Add(PrintCommandButton(self, ['G28 Z0'], 'print-move-home.png'), pos=(3, 8))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 Z-0.1 F200', 'G90'], 'print-move-z-0.1.png'), pos=(4, 8))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 Z-1 F200', 'G90'], 'print-move-z-1.png'), pos=(5, 8))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 Z-10 F200', 'G90'], 'print-move-z-10.png'), pos=(6, 8))
#Calibration buttons
sizer.Add(PrintCommandButton(self, ['G1 X%s Y%s F6000' % (self.width - 10, 20)], 'print-calibrateUL.png'), pos=(1, 9))
sizer.Add(PrintCommandButton(self, ['G1 X%s Y%s F6000' % (self.width - 10, self.depth - 10)], 'print-calibrateDL.png'), pos=(5, 9))
sizer.Add(PrintCommandButton(self, ['G1 X%s Y%s F6000' % (20, 20)], 'print-calibrateUR.png'), pos=(1, 13))
sizer.Add(PrintCommandButton(self, ['G1 X%s Y%s F6000' % (20, self.depth - 10)], 'print-calibrateDR.png'), pos=(5, 13))
sizer.Add(PrintCommandButton(self, ['G1 X%s Y%s F6000' % (self.width/2, self.depth/2)], 'print-calibrate-center.png'), pos=(3, 11))
sizer.Add(PrintCommandButton(self, ['G1 X%s Y%s F6000' % (3*self.width/4, self.depth/4)], 'print-calibrate-center-UL.png'), pos=(2, 10))
sizer.Add(PrintCommandButton(self, ['G1 X%s Y%s F6000' % (3*self.width/4, 3*self.depth/4)], 'print-calibrate-center-DL.png'), pos=(4, 10))
sizer.Add(PrintCommandButton(self, ['G1 X%s Y%s F6000' % (self.width/4, self.depth/4)], 'print-calibrate-center-UR.png'), pos=(2, 12))
sizer.Add(PrintCommandButton(self, ['G1 X%s Y%s F6000' % (self.width/4, 3*self.depth/4)], 'print-calibrate-center-DR.png'), pos=(4, 12))
sizer.Add(PrintCommandButton(self, ['G92 E0', 'G1 E2 F120'], 'extrude.png', size=(60, 20)), pos=(8, 8))
sizer.Add(PrintCommandButton(self, ['G92 E0', 'G1 E5 F120'], 'extrude5.png'), pos=(8, 9))
sizer.Add(PrintCommandButton(self, ['G92 E0', 'G1 E10 F120'], 'extrude10.png'), pos=(8, 10))
sizer.Add(PrintCommandButton(self, ['G92 E0', 'G1 E20 F120'], 'extrude20.png'), pos=(8, 11))
sizer.Add(PrintCommandButton(self, ['G92 E0', 'G1 E-2 F120'], 'retract.png', size=(60, 20)), pos=(9, 8))
sizer.Add(PrintCommandButton(self, ['G92 E0', 'G1 E-5 F120'], 'retract5.png'), pos=(9, 9))
sizer.Add(PrintCommandButton(self, ['G92 E0', 'G1 E-10 F120'], 'retract10.png'), pos=(9, 10))
sizer.Add(PrintCommandButton(self, ['G92 E0', 'G1 E-20 F120'], 'retract20.png'), pos=(9, 11))
nb.AddPage(self.directControlPanel, _("Jog"))
self.speedPanel = wx.Panel(nb)
sizer = wx.GridBagSizer(2, 2)
self.speedPanel.SetSizer(sizer)
self.outerWallSpeedSelect = wx.SpinCtrl(self.speedPanel, -1, '100', size=(21 * 3, 21), style=wx.SP_ARROW_KEYS)
self.outerWallSpeedSelect.SetRange(5, 1000)
self.innerWallSpeedSelect = wx.SpinCtrl(self.speedPanel, -1, '100', size=(21 * 3, 21), style=wx.SP_ARROW_KEYS)
self.innerWallSpeedSelect.SetRange(5, 1000)
self.fillSpeedSelect = wx.SpinCtrl(self.speedPanel, -1, '100', size=(21 * 3, 21), style=wx.SP_ARROW_KEYS)
self.fillSpeedSelect.SetRange(5, 1000)
self.supportSpeedSelect = wx.SpinCtrl(self.speedPanel, -1, '100', size=(21 * 3, 21), style=wx.SP_ARROW_KEYS)
self.supportSpeedSelect.SetRange(5, 1000)
sizer.Add(wx.StaticText(self.speedPanel, -1, _("Outer wall:")), pos=(0, 0))
sizer.Add(self.outerWallSpeedSelect, pos=(0, 1))
sizer.Add(wx.StaticText(self.speedPanel, -1, "%"), pos=(0, 2))
sizer.Add(wx.StaticText(self.speedPanel, -1, _("Inner wall:")), pos=(1, 0))
sizer.Add(self.innerWallSpeedSelect, pos=(1, 1))
sizer.Add(wx.StaticText(self.speedPanel, -1, "%"), pos=(1, 2))
sizer.Add(wx.StaticText(self.speedPanel, -1, _("Fill:")), pos=(2, 0))
sizer.Add(self.fillSpeedSelect, pos=(2, 1))
sizer.Add(wx.StaticText(self.speedPanel, -1, "%"), pos=(2, 2))
sizer.Add(wx.StaticText(self.speedPanel, -1, _("Support:")), pos=(3, 0))
sizer.Add(self.supportSpeedSelect, pos=(3, 1))
sizer.Add(wx.StaticText(self.speedPanel, -1, "%"), pos=(3, 2))
nb.AddPage(self.speedPanel, _("Speed"))
self.termPanel = wx.Panel(nb)
sizer = wx.GridBagSizer(2, 2)
self.termPanel.SetSizer(sizer)
f = wx.Font(8, wx.FONTFAMILY_MODERN, wx.FONTSTYLE_NORMAL, wx.FONTWEIGHT_NORMAL, False)
self.termLog = wx.TextCtrl(self.termPanel, style=wx.TE_MULTILINE | wx.TE_DONTWRAP)
self.termLog.SetFont(f)
self.termLog.SetEditable(0)
self.termInput = wx.TextCtrl(self.termPanel, style=wx.TE_PROCESS_ENTER)
self.termInput.SetFont(f)
sizer.Add(self.termLog, pos=(0, 0), flag=wx.EXPAND)
sizer.Add(self.termInput, pos=(1, 0), flag=wx.EXPAND)
sizer.AddGrowableCol(0)
sizer.AddGrowableRow(0)
nb.AddPage(self.termPanel, _("Term"))
self.sizer.AddGrowableRow(6)
self.sizer.AddGrowableCol(3)
self.Bind(wx.EVT_CLOSE, self.OnClose)
self.connectButton.Bind(wx.EVT_BUTTON, self.OnConnect)
#self.loadButton.Bind(wx.EVT_BUTTON, self.OnLoad)
self.printButton.Bind(wx.EVT_BUTTON, self.OnPrint)
self.pauseButton.Bind(wx.EVT_BUTTON, self.OnPause)
self.elevateButton.Bind(wx.EVT_BUTTON, self.OnElevate)
self.cancelButton.Bind(wx.EVT_BUTTON, self.OnCancel)
self.machineLogButton.Bind(wx.EVT_BUTTON, self.OnMachineLog)
self.Bind(wx.EVT_BUTTON, lambda e: (self.temperatureSelect.SetValue(int(profile.getProfileSettingFloat('print_temperature'))), self.machineCom.sendCommand("M104 S%d" % (int(profile.getProfileSettingFloat('print_temperature'))))), self.temperatureHeatUp)
self.Bind(wx.EVT_SPINCTRL, self.OnTempChange, self.temperatureSelect)
self.Bind(wx.EVT_SPINCTRL, self.OnBedTempChange, self.bedTemperatureSelect)
self.Bind(wx.EVT_SPINCTRL, self.OnSpeedChange, self.outerWallSpeedSelect)
self.Bind(wx.EVT_SPINCTRL, self.OnSpeedChange, self.innerWallSpeedSelect)
self.Bind(wx.EVT_SPINCTRL, self.OnSpeedChange, self.fillSpeedSelect)
self.Bind(wx.EVT_SPINCTRL, self.OnSpeedChange, self.supportSpeedSelect)
self.Bind(wx.EVT_TEXT_ENTER, self.OnTermEnterLine, self.termInput)
self.termInput.Bind(wx.EVT_CHAR, self.OnTermKey)
self.Layout()
self.Fit()
self.Centre()
self.statsText.SetMinSize(self.statsText.GetSize())
self.UpdateButtonStates()
#self.UpdateProgress()
self._thread = threading.Thread(target=self._stdinMonitor)
self._thread.daemon = True
self._thread.start()
if webcam.hasWebcamSupport() and profile.getPreference('camera_enabled') == 'True':
#Need to call the camera class on the GUI thread, or else it won't work. Shame as it hangs the GUI for about 2 seconds.
wx.CallAfter(self._webcamCheck)
def __init__(self):
super(printWindow, self).__init__(None, -1, title='Printing')
self.machineCom = None
self.gcode = None
self.gcodeList = None
self.sendList = []
self.temp = None
self.bedTemp = None
self.bufferLineCount = 4
self.sendCnt = 0
self.feedrateRatioOuterWall = 1.0
self.feedrateRatioInnerWall = 1.0
self.feedrateRatioFill = 1.0
self.feedrateRatioSupport = 1.0
self.pause = False
self.termHistory = []
self.termHistoryIdx = 0
self.cam = None
if webcam.hasWebcamSupport():
self.cam = webcam.webcam()
if not self.cam.hasCamera():
self.cam = None
self.SetSizer(wx.BoxSizer())
self.panel = wx.Panel(self)
self.GetSizer().Add(self.panel, 1, flag=wx.EXPAND)
self.sizer = wx.GridBagSizer(2, 2)
self.panel.SetSizer(self.sizer)
sb = wx.StaticBox(self.panel, label="Statistics")
boxsizer = wx.StaticBoxSizer(sb, wx.VERTICAL)
self.powerWarningText = wx.StaticText(
parent=self.panel,
id=-1,
label=
"Your computer is running on battery power.\nConnect your computer to AC power or your print might not finish.",
style=wx.ALIGN_CENTER)
self.powerWarningText.SetBackgroundColour('red')
self.powerWarningText.SetForegroundColour('white')
boxsizer.AddF(self.powerWarningText,
flags=wx.SizerFlags().Expand().Border(wx.BOTTOM, 10))
self.powerManagement = power.PowerManagement()
self.powerWarningTimer = wx.Timer(self)
self.Bind(wx.EVT_TIMER, self.OnPowerWarningChange,
self.powerWarningTimer)
self.OnPowerWarningChange(None)
self.powerWarningTimer.Start(10000)
self.statsText = wx.StaticText(
self.panel, -1,
"Filament: ####.##m #.##g\nEstimated print time: #####:##\nMachine state:\nDetecting baudrateXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX"
)
boxsizer.Add(self.statsText, flag=wx.LEFT, border=5)
self.sizer.Add(boxsizer, pos=(0, 0), span=(7, 1), flag=wx.EXPAND)
self.connectButton = wx.Button(self.panel, -1, 'Connect')
#self.loadButton = wx.Button(self.panel, -1, 'Load')
self.printButton = wx.Button(self.panel, -1, 'Print')
self.pauseButton = wx.Button(self.panel, -1, 'Pause')
self.cancelButton = wx.Button(self.panel, -1, 'Cancel print')
self.machineLogButton = wx.Button(self.panel, -1, 'Error log')
self.progress = wx.Gauge(self.panel, -1)
self.sizer.Add(self.connectButton, pos=(1, 1), flag=wx.EXPAND)
#self.sizer.Add(self.loadButton, pos=(1,1), flag=wx.EXPAND)
self.sizer.Add(self.printButton, pos=(2, 1), flag=wx.EXPAND)
self.sizer.Add(self.pauseButton, pos=(3, 1), flag=wx.EXPAND)
self.sizer.Add(self.cancelButton, pos=(4, 1), flag=wx.EXPAND)
self.sizer.Add(self.machineLogButton, pos=(5, 1), flag=wx.EXPAND)
self.sizer.Add(self.progress, pos=(7, 0), span=(1, 7), flag=wx.EXPAND)
nb = wx.Notebook(self.panel)
self.sizer.Add(nb, pos=(0, 2), span=(7, 4), flag=wx.EXPAND)
self.temperaturePanel = wx.Panel(nb)
sizer = wx.GridBagSizer(2, 2)
self.temperaturePanel.SetSizer(sizer)
self.temperatureSelect = wx.SpinCtrl(self.temperaturePanel,
-1,
'0',
size=(21 * 3, 21),
style=wx.SP_ARROW_KEYS)
self.temperatureSelect.SetRange(0, 400)
self.bedTemperatureLabel = wx.StaticText(self.temperaturePanel, -1,
"BedTemp:")
self.bedTemperatureSelect = wx.SpinCtrl(self.temperaturePanel,
-1,
'0',
size=(21 * 3, 21),
style=wx.SP_ARROW_KEYS)
self.bedTemperatureSelect.SetRange(0, 400)
self.bedTemperatureLabel.Show(False)
self.bedTemperatureSelect.Show(False)
self.temperatureGraph = temperatureGraph(self.temperaturePanel)
sizer.Add(wx.StaticText(self.temperaturePanel, -1, "Temp:"),
pos=(0, 0))
sizer.Add(self.temperatureSelect, pos=(0, 1))
sizer.Add(self.bedTemperatureLabel, pos=(1, 0))
sizer.Add(self.bedTemperatureSelect, pos=(1, 1))
sizer.Add(self.temperatureGraph,
pos=(2, 0),
span=(1, 2),
flag=wx.EXPAND)
sizer.AddGrowableRow(2)
sizer.AddGrowableCol(1)
nb.AddPage(self.temperaturePanel, 'Temp')
self.directControlPanel = wx.Panel(nb)
sizer = wx.GridBagSizer(2, 2)
self.directControlPanel.SetSizer(sizer)
sizer.Add(PrintCommandButton(self, ['G91', 'G1 Y100 F6000', 'G90'],
'print-move-y100.png'),
pos=(0, 3))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 Y10 F6000', 'G90'],
'print-move-y10.png'),
pos=(1, 3))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 Y1 F6000', 'G90'],
'print-move-y1.png'),
pos=(2, 3))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 Y-1 F6000', 'G90'],
'print-move-y-1.png'),
pos=(4, 3))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 Y-10 F6000', 'G90'],
'print-move-y-10.png'),
pos=(5, 3))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 Y-100 F6000', 'G90'],
'print-move-y-100.png'),
pos=(6, 3))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 X-100 F6000', 'G90'],
'print-move-x-100.png'),
pos=(3, 0))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 X-10 F6000', 'G90'],
'print-move-x-10.png'),
pos=(3, 1))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 X-1 F6000', 'G90'],
'print-move-x-1.png'),
pos=(3, 2))
sizer.Add(PrintCommandButton(self, ['G28 X0 Y0'],
'print-move-home.png'),
pos=(3, 3))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 X1 F6000', 'G90'],
'print-move-x1.png'),
pos=(3, 4))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 X10 F6000', 'G90'],
'print-move-x10.png'),
pos=(3, 5))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 X100 F6000', 'G90'],
'print-move-x100.png'),
pos=(3, 6))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 Z10 F200', 'G90'],
'print-move-z10.png'),
pos=(0, 8))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 Z1 F200', 'G90'],
'print-move-z1.png'),
pos=(1, 8))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 Z0.1 F200', 'G90'],
'print-move-z0.1.png'),
pos=(2, 8))
sizer.Add(PrintCommandButton(self, ['G28 Z0'], 'print-move-home.png'),
pos=(3, 8))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 Z-0.1 F200', 'G90'],
'print-move-z-0.1.png'),
pos=(4, 8))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 Z-1 F200', 'G90'],
'print-move-z-1.png'),
pos=(5, 8))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 Z-10 F200', 'G90'],
'print-move-z-10.png'),
pos=(6, 8))
sizer.Add(PrintCommandButton(self, ['G92 E0', 'G1 E2 F120'],
'extrude.png',
size=(60, 20)),
pos=(1, 10),
span=(1, 3),
flag=wx.EXPAND)
sizer.Add(PrintCommandButton(self, ['G92 E0', 'G1 E-2 F120'],
'retract.png',
size=(60, 20)),
pos=(2, 10),
span=(1, 3),
flag=wx.EXPAND)
nb.AddPage(self.directControlPanel, 'Jog')
self.speedPanel = wx.Panel(nb)
sizer = wx.GridBagSizer(2, 2)
self.speedPanel.SetSizer(sizer)
self.outerWallSpeedSelect = wx.SpinCtrl(self.speedPanel,
-1,
'100',
size=(21 * 3, 21),
style=wx.SP_ARROW_KEYS)
self.outerWallSpeedSelect.SetRange(5, 1000)
self.innerWallSpeedSelect = wx.SpinCtrl(self.speedPanel,
-1,
'100',
size=(21 * 3, 21),
style=wx.SP_ARROW_KEYS)
self.innerWallSpeedSelect.SetRange(5, 1000)
self.fillSpeedSelect = wx.SpinCtrl(self.speedPanel,
-1,
'100',
size=(21 * 3, 21),
style=wx.SP_ARROW_KEYS)
self.fillSpeedSelect.SetRange(5, 1000)
self.supportSpeedSelect = wx.SpinCtrl(self.speedPanel,
-1,
'100',
size=(21 * 3, 21),
style=wx.SP_ARROW_KEYS)
self.supportSpeedSelect.SetRange(5, 1000)
sizer.Add(wx.StaticText(self.speedPanel, -1, "Outer wall:"),
pos=(0, 0))
sizer.Add(self.outerWallSpeedSelect, pos=(0, 1))
sizer.Add(wx.StaticText(self.speedPanel, -1, "%"), pos=(0, 2))
sizer.Add(wx.StaticText(self.speedPanel, -1, "Inner wall:"),
pos=(1, 0))
sizer.Add(self.innerWallSpeedSelect, pos=(1, 1))
sizer.Add(wx.StaticText(self.speedPanel, -1, "%"), pos=(1, 2))
sizer.Add(wx.StaticText(self.speedPanel, -1, "Fill:"), pos=(2, 0))
sizer.Add(self.fillSpeedSelect, pos=(2, 1))
sizer.Add(wx.StaticText(self.speedPanel, -1, "%"), pos=(2, 2))
sizer.Add(wx.StaticText(self.speedPanel, -1, "Support:"), pos=(3, 0))
sizer.Add(self.supportSpeedSelect, pos=(3, 1))
sizer.Add(wx.StaticText(self.speedPanel, -1, "%"), pos=(3, 2))
nb.AddPage(self.speedPanel, 'Speed')
self.termPanel = wx.Panel(nb)
sizer = wx.GridBagSizer(2, 2)
self.termPanel.SetSizer(sizer)
f = wx.Font(8, wx.FONTFAMILY_MODERN, wx.FONTSTYLE_NORMAL,
wx.FONTWEIGHT_NORMAL, False)
self.termLog = wx.TextCtrl(self.termPanel,
style=wx.TE_MULTILINE | wx.TE_DONTWRAP)
self.termLog.SetFont(f)
self.termLog.SetEditable(0)
self.termInput = wx.TextCtrl(self.termPanel, style=wx.TE_PROCESS_ENTER)
self.termInput.SetFont(f)
sizer.Add(self.termLog, pos=(0, 0), flag=wx.EXPAND)
sizer.Add(self.termInput, pos=(1, 0), flag=wx.EXPAND)
sizer.AddGrowableCol(0)
sizer.AddGrowableRow(0)
nb.AddPage(self.termPanel, 'Term')
if self.cam is not None:
self.camPage = wx.Panel(nb)
sizer = wx.GridBagSizer(2, 2)
self.camPage.SetSizer(sizer)
self.timelapsEnable = wx.CheckBox(
self.camPage, -1, 'Enable timelapse movie recording')
sizer.Add(self.timelapsEnable,
pos=(0, 0),
span=(1, 2),
flag=wx.EXPAND)
pages = self.cam.propertyPages()
self.cam.buttons = [self.timelapsEnable]
for page in pages:
button = wx.Button(self.camPage, -1, page)
button.index = pages.index(page)
sizer.Add(button, pos=(1, pages.index(page)))
button.Bind(wx.EVT_BUTTON, self.OnPropertyPageButton)
self.cam.buttons.append(button)
self.campreviewEnable = wx.CheckBox(self.camPage, -1,
'Show preview')
sizer.Add(self.campreviewEnable,
pos=(2, 0),
span=(1, 2),
flag=wx.EXPAND)
self.camPreview = wx.Panel(self.camPage)
sizer.Add(self.camPreview, pos=(3, 0), span=(1, 2), flag=wx.EXPAND)
nb.AddPage(self.camPage, 'Camera')
self.camPreview.timer = wx.Timer(self)
self.Bind(wx.EVT_TIMER, self.OnCameraTimer, self.camPreview.timer)
self.camPreview.timer.Start(500)
self.camPreview.Bind(wx.EVT_ERASE_BACKGROUND,
self.OnCameraEraseBackground)
self.sizer.AddGrowableRow(6)
self.sizer.AddGrowableCol(3)
self.Bind(wx.EVT_CLOSE, self.OnClose)
self.connectButton.Bind(wx.EVT_BUTTON, self.OnConnect)
#self.loadButton.Bind(wx.EVT_BUTTON, self.OnLoad)
self.printButton.Bind(wx.EVT_BUTTON, self.OnPrint)
self.pauseButton.Bind(wx.EVT_BUTTON, self.OnPause)
self.cancelButton.Bind(wx.EVT_BUTTON, self.OnCancel)
self.machineLogButton.Bind(wx.EVT_BUTTON, self.OnMachineLog)
self.Bind(wx.EVT_SPINCTRL, self.OnTempChange, self.temperatureSelect)
self.Bind(wx.EVT_SPINCTRL, self.OnBedTempChange,
self.bedTemperatureSelect)
self.Bind(wx.EVT_SPINCTRL, self.OnSpeedChange,
self.outerWallSpeedSelect)
self.Bind(wx.EVT_SPINCTRL, self.OnSpeedChange,
self.innerWallSpeedSelect)
self.Bind(wx.EVT_SPINCTRL, self.OnSpeedChange, self.fillSpeedSelect)
self.Bind(wx.EVT_SPINCTRL, self.OnSpeedChange, self.supportSpeedSelect)
self.Bind(wx.EVT_TEXT_ENTER, self.OnTermEnterLine, self.termInput)
self.termInput.Bind(wx.EVT_CHAR, self.OnTermKey)
self.Layout()
self.Fit()
self.Centre()
self.statsText.SetMinSize(self.statsText.GetSize())
self.UpdateButtonStates()
def __init__(self, parent, manager, ym):
super(newDesignWindow, self).__init__(parent, title='Share on YouMagine')
p = wx.Panel(self)
self.SetSizer(wx.BoxSizer())
self.GetSizer().Add(p, 1, wx.EXPAND)
self._manager = manager
self._ym = ym
categoryOptions = ym.getCategories()
licenseOptions = ym.getLicenses()
self._designName = wx.TextCtrl(p, -1, _("Design name"))
self._designDescription = wx.TextCtrl(p, -1, '', size=(1, 150), style = wx.TE_MULTILINE)
self._designLicense = wx.ComboBox(p, -1, licenseOptions[0], choices=licenseOptions, style=wx.CB_DROPDOWN|wx.CB_READONLY)
self._category = wx.ComboBox(p, -1, categoryOptions[-1], choices=categoryOptions, style=wx.CB_DROPDOWN|wx.CB_READONLY)
self._publish = wx.CheckBox(p, -1, _("Publish after upload"))
self._shareButton = wx.Button(p, -1, _("Share!"))
self._imageScroll = wx.lib.scrolledpanel.ScrolledPanel(p)
self._additionalFiles = wx.CheckListBox(p, -1)
self._additionalFiles.InsertItems(getAdditionalFiles(self._manager._scene.objects(), True), 0)
self._additionalFiles.SetChecked(range(0, self._additionalFiles.GetCount()))
self._additionalFiles.InsertItems(getAdditionalFiles(self._manager._scene.objects(), False), self._additionalFiles.GetCount())
self._imageScroll.SetSizer(wx.BoxSizer(wx.HORIZONTAL))
self._addImageButton = wx.Button(self._imageScroll, -1, _("Add..."), size=(70,52))
self._imageScroll.GetSizer().Add(self._addImageButton)
self._snapshotButton = wx.Button(self._imageScroll, -1, _("Webcam..."), size=(70,52))
self._imageScroll.GetSizer().Add(self._snapshotButton)
if not webcam.hasWebcamSupport():
self._snapshotButton.Hide()
self._imageScroll.Fit()
self._imageScroll.SetupScrolling(scroll_x=True, scroll_y=False)
self._imageScroll.SetMinSize((20, self._imageScroll.GetSize()[1] + wx.SystemSettings_GetMetric(wx.SYS_HSCROLL_Y)))
self._publish.SetValue(True)
self._publish.SetToolTipString(
_("Directly publish the design after uploading.\nWithout this check the design will not be public\nuntil you publish it yourself on YouMagine.com"))
s = wx.GridBagSizer(5, 5)
p.SetSizer(s)
s.Add(wx.StaticBitmap(p, -1, wx.Bitmap(getPathForImage('youmagine-text.png'))), (0,0), span=(1,3), flag=wx.ALIGN_CENTRE | wx.ALL, border=5)
s.Add(wx.StaticText(p, -1, _("Design name:")), (1, 0), flag=wx.LEFT|wx.TOP, border=5)
s.Add(self._designName, (1, 1), span=(1,2), flag=wx.EXPAND|wx.LEFT|wx.TOP|wx.RIGHT, border=5)
s.Add(wx.StaticText(p, -1, _("Description:")), (2, 0), flag=wx.LEFT|wx.TOP, border=5)
s.Add(self._designDescription, (2, 1), span=(1,2), flag=wx.EXPAND|wx.LEFT|wx.TOP|wx.RIGHT, border=5)
s.Add(wx.StaticText(p, -1, _("Category:")), (3, 0), flag=wx.LEFT|wx.TOP, border=5)
s.Add(self._category, (3, 1), span=(1,2), flag=wx.EXPAND|wx.LEFT|wx.TOP|wx.RIGHT, border=5)
s.Add(wx.StaticText(p, -1, _("License:")), (4, 0), flag=wx.LEFT|wx.TOP, border=5)
s.Add(self._designLicense, (4, 1), span=(1,2), flag=wx.EXPAND|wx.LEFT|wx.TOP|wx.RIGHT, border=5)
s.Add(wx.StaticLine(p, -1), (5,0), span=(1,3), flag=wx.EXPAND|wx.ALL)
s.Add(wx.StaticText(p, -1, _("Images:")), (6, 0), flag=wx.LEFT|wx.TOP, border=5)
s.Add(self._imageScroll, (6, 1), span=(1, 2), flag=wx.EXPAND|wx.LEFT|wx.TOP|wx.RIGHT, border=5)
s.Add(wx.StaticLine(p, -1), (7,0), span=(1,3), flag=wx.EXPAND|wx.ALL)
s.Add(wx.StaticText(p, -1, _("Related design files:")), (8, 0), flag=wx.LEFT|wx.TOP, border=5)
s.Add(self._additionalFiles, (8, 1), span=(1, 2), flag=wx.EXPAND|wx.LEFT|wx.TOP|wx.RIGHT, border=5)
s.Add(wx.StaticLine(p, -1), (9,0), span=(1,3), flag=wx.EXPAND|wx.ALL)
s.Add(self._shareButton, (10, 1), flag=wx.BOTTOM, border=15)
s.Add(self._publish, (10, 2), flag=wx.BOTTOM|wx.ALIGN_CENTER_VERTICAL, border=15)
s.AddGrowableRow(2)
s.AddGrowableCol(2)
self.Bind(wx.EVT_BUTTON, self.OnShare, self._shareButton)
self.Bind(wx.EVT_BUTTON, self.OnAddImage, self._addImageButton)
self.Bind(wx.EVT_BUTTON, self.OnTakeImage, self._snapshotButton)
self.Fit()
self.Centre()
self._designDescription.SetMinSize((1,1))
self._designName.SetFocus()
self._designName.SelectAll()
def __init__(self, printerConnection):
super(printWindow, self).__init__(None, -1, title=_("Printing"))
self._printerConnection = printerConnection
self.lastUpdateTime = 0
self.SetSizer(wx.BoxSizer())
self.panel = wx.Panel(self)
self.GetSizer().Add(self.panel, 1, flag=wx.EXPAND)
self.sizer = wx.GridBagSizer(2, 2)
self.panel.SetSizer(self.sizer)
sb = wx.StaticBox(self.panel, label=_("Statistics"))
boxsizer = wx.StaticBoxSizer(sb, wx.VERTICAL)
self.powerWarningText = wx.StaticText(parent=self.panel,
id=-1,
label=_("Your computer is running on battery power.\nConnect your computer to AC power or your print might not finish."),
style=wx.ALIGN_CENTER)
self.powerWarningText.SetBackgroundColour('red')
self.powerWarningText.SetForegroundColour('white')
boxsizer.AddF(self.powerWarningText, flags=wx.SizerFlags().Expand().Border(wx.BOTTOM, 10))
self.powerManagement = power.PowerManagement()
self.powerWarningTimer = wx.Timer(self)
self.Bind(wx.EVT_TIMER, self.OnPowerWarningChange, self.powerWarningTimer)
self.OnPowerWarningChange(None)
self.powerWarningTimer.Start(10000)
self.statsText = wx.StaticText(self.panel, -1, _("Filament: ####.##m #.##g\nEstimated print time: #####:##\nMachine state:\nDetecting baudrateXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX"))
boxsizer.Add(self.statsText, flag=wx.LEFT, border=5)
self.sizer.Add(boxsizer, pos=(0, 0), span=(7, 1), flag=wx.EXPAND)
self.connectButton = wx.Button(self.panel, -1, _("Connect"))
#self.loadButton = wx.Button(self.panel, -1, 'Load')
self.printButton = wx.Button(self.panel, -1, _("Print"))
self.pauseButton = wx.Button(self.panel, -1, _("Pause"))
self.cancelButton = wx.Button(self.panel, -1, _("Cancel print"))
self.errorLogButton = wx.Button(self.panel, -1, _("Error log"))
self.progress = wx.Gauge(self.panel, -1, range=1000)
self.sizer.Add(self.connectButton, pos=(1, 1), flag=wx.EXPAND)
#self.sizer.Add(self.loadButton, pos=(1,1), flag=wx.EXPAND)
self.sizer.Add(self.printButton, pos=(2, 1), flag=wx.EXPAND)
self.sizer.Add(self.pauseButton, pos=(3, 1), flag=wx.EXPAND)
self.sizer.Add(self.cancelButton, pos=(4, 1), flag=wx.EXPAND)
self.sizer.Add(self.errorLogButton, pos=(5, 1), flag=wx.EXPAND)
self.sizer.Add(self.progress, pos=(7, 0), span=(1, 7), flag=wx.EXPAND)
nb = wx.Notebook(self.panel)
self.tabs = nb
self.sizer.Add(nb, pos=(0, 2), span=(7, 4), flag=wx.EXPAND)
self.temperaturePanel = wx.Panel(nb)
sizer = wx.GridBagSizer(2, 2)
self.temperaturePanel.SetSizer(sizer)
self.temperatureSelect = wx.SpinCtrl(self.temperaturePanel, -1, '0', size=(21 * 3, 21), style=wx.SP_ARROW_KEYS)
self.temperatureSelect.SetRange(0, 400)
self.temperatureHeatUp = wx.Button(self.temperaturePanel, -1, str(int(profile.getProfileSettingFloat('print_temperature'))) + 'C')
self.bedTemperatureLabel = wx.StaticText(self.temperaturePanel, -1, _("BedTemp:"))
self.bedTemperatureSelect = wx.SpinCtrl(self.temperaturePanel, -1, '0', size=(21 * 3, 21), style=wx.SP_ARROW_KEYS)
self.bedTemperatureSelect.SetRange(0, 400)
self.bedTemperatureLabel.Show(False)
self.bedTemperatureSelect.Show(False)
self.temperatureGraph = TemperatureGraph(self.temperaturePanel)
sizer.Add(wx.StaticText(self.temperaturePanel, -1, _("Temp:")), pos=(0, 0))
sizer.Add(self.temperatureSelect, pos=(0, 1))
sizer.Add(self.temperatureHeatUp, pos=(0, 2))
sizer.Add(self.bedTemperatureLabel, pos=(1, 0))
sizer.Add(self.bedTemperatureSelect, pos=(1, 1))
sizer.Add(self.temperatureGraph, pos=(2, 0), span=(1, 3), flag=wx.EXPAND)
sizer.AddGrowableRow(2)
sizer.AddGrowableCol(2)
nb.AddPage(self.temperaturePanel, 'Temp')
self.directControlPanel = wx.Panel(nb)
sizer = wx.GridBagSizer(2, 2)
self.directControlPanel.SetSizer(sizer)
sizer.Add(PrintCommandButton(self, ['G91', 'G1 Y100 F6000', 'G90'], 'print-move-y100.png'), pos=(0, 3))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 Y10 F6000', 'G90'], 'print-move-y10.png'), pos=(1, 3))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 Y1 F6000', 'G90'], 'print-move-y1.png'), pos=(2, 3))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 Y-1 F6000', 'G90'], 'print-move-y-1.png'), pos=(4, 3))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 Y-10 F6000', 'G90'], 'print-move-y-10.png'), pos=(5, 3))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 Y-100 F6000', 'G90'], 'print-move-y-100.png'), pos=(6, 3))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 X-100 F6000', 'G90'], 'print-move-x-100.png'), pos=(3, 0))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 X-10 F6000', 'G90'], 'print-move-x-10.png'), pos=(3, 1))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 X-1 F6000', 'G90'], 'print-move-x-1.png'), pos=(3, 2))
sizer.Add(PrintCommandButton(self, ['G28 X0 Y0'], 'print-move-home.png'), pos=(3, 3))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 X1 F6000', 'G90'], 'print-move-x1.png'), pos=(3, 4))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 X10 F6000', 'G90'], 'print-move-x10.png'), pos=(3, 5))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 X100 F6000', 'G90'], 'print-move-x100.png'), pos=(3, 6))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 Z10 F200', 'G90'], 'print-move-z10.png'), pos=(0, 8))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 Z1 F200', 'G90'], 'print-move-z1.png'), pos=(1, 8))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 Z0.1 F200', 'G90'], 'print-move-z0.1.png'), pos=(2, 8))
sizer.Add(PrintCommandButton(self, ['G28 Z0'], 'print-move-home.png'), pos=(3, 8))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 Z-0.1 F200', 'G90'], 'print-move-z-0.1.png'), pos=(4, 8))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 Z-1 F200', 'G90'], 'print-move-z-1.png'), pos=(5, 8))
sizer.Add(PrintCommandButton(self, ['G91', 'G1 Z-10 F200', 'G90'], 'print-move-z-10.png'), pos=(6, 8))
sizer.Add(PrintCommandButton(self, ['G92 E0', 'G1 E2 F120'], 'extrude.png', size=(60, 20)), pos=(1, 10), span=(1, 3), flag=wx.EXPAND)
sizer.Add(PrintCommandButton(self, ['G92 E0', 'G1 E-2 F120'], 'retract.png', size=(60, 20)), pos=(2, 10), span=(1, 3), flag=wx.EXPAND)
nb.AddPage(self.directControlPanel, _("Jog"))
self.termPanel = wx.Panel(nb)
sizer = wx.GridBagSizer(2, 2)
self.termPanel.SetSizer(sizer)
f = wx.Font(8, wx.FONTFAMILY_MODERN, wx.FONTSTYLE_NORMAL, wx.FONTWEIGHT_NORMAL, False)
self.termLog = wx.TextCtrl(self.termPanel, style=wx.TE_MULTILINE | wx.TE_DONTWRAP)
self.termLog.SetFont(f)
self.termLog.SetEditable(0)
self.termInput = wx.TextCtrl(self.termPanel, style=wx.TE_PROCESS_ENTER)
self.termInput.SetFont(f)
self._termHistory = []
self._termHistoryIdx = 0
sizer.Add(self.termLog, pos=(0, 0), flag=wx.EXPAND)
sizer.Add(self.termInput, pos=(1, 0), flag=wx.EXPAND)
sizer.AddGrowableCol(0)
sizer.AddGrowableRow(0)
nb.AddPage(self.termPanel, _("Term"))
self.sizer.AddGrowableRow(6)
self.sizer.AddGrowableCol(3)
self.Bind(wx.EVT_CLOSE, self.OnClose)
self.connectButton.Bind(wx.EVT_BUTTON, self.OnConnect)
#self.loadButton.Bind(wx.EVT_BUTTON, self.OnLoad)
self.printButton.Bind(wx.EVT_BUTTON, self.OnPrint)
self.pauseButton.Bind(wx.EVT_BUTTON, self.OnPause)
self.cancelButton.Bind(wx.EVT_BUTTON, self.OnCancel)
self.errorLogButton.Bind(wx.EVT_BUTTON, self.OnErrorLog)
self.Bind(wx.EVT_BUTTON, lambda e: (self.temperatureSelect.SetValue(int(profile.getProfileSettingFloat('print_temperature'))), self.machineCom.sendCommand("M104 S%d" % (int(profile.getProfileSettingFloat('print_temperature'))))), self.temperatureHeatUp)
self.Bind(wx.EVT_SPINCTRL, self.OnTempChange, self.temperatureSelect)
self.Bind(wx.EVT_SPINCTRL, self.OnBedTempChange, self.bedTemperatureSelect)
self.Bind(wx.EVT_TEXT_ENTER, self.OnTermEnterLine, self.termInput)
self.termInput.Bind(wx.EVT_CHAR, self.OnTermKey)
self.Layout()
self.Fit()
self.Centre()
self.statsText.SetMinSize(self.statsText.GetSize())
self.statsText.SetLabel(self._printerConnection.getStatusString())
self.UpdateButtonStates()
if webcam.hasWebcamSupport():
#Need to call the camera class on the GUI thread, or else it won't work. Shame as it hangs the GUI for about 2 seconds.
wx.CallAfter(self._webcamCheck)
self._printerConnection.addCallback(self._doPrinterConnectionUpdate)
