class MapScalePanel(QWidget):
def __init__(self, parent, mapScaleDropDownType):
QWidget.__init__(self, parent)
while not isinstance(parent, QDialog):
parent = parent.parent()
self.setObjectName("DistanceBoxPanel" +
str(len(parent.findChildren(MapScalePanel))))
self.hLayoutBoxPanel = QHBoxLayout(self)
self.hLayoutBoxPanel.setSpacing(0)
self.hLayoutBoxPanel.setContentsMargins(0, 0, 0, 0)
self.hLayoutBoxPanel.setObjectName(("hLayoutBoxPanel"))
self.frameBoxPanel = QFrame(self)
sizePolicy = QSizePolicy(QSizePolicy.Fixed, QSizePolicy.Fixed)
sizePolicy.setHorizontalStretch(0)
sizePolicy.setVerticalStretch(0)
sizePolicy.setHeightForWidth(
self.frameBoxPanel.sizePolicy().hasHeightForWidth())
self.frameBoxPanel.setSizePolicy(sizePolicy)
self.frameBoxPanel.setFrameShape(QFrame.NoFrame)
self.frameBoxPanel.setFrameShadow(QFrame.Raised)
self.frameBoxPanel.setObjectName(("frameBoxPanel"))
self.hLayoutframeBoxPanel = QHBoxLayout(self.frameBoxPanel)
self.hLayoutframeBoxPanel.setSpacing(0)
self.hLayoutframeBoxPanel.setMargin(0)
self.hLayoutframeBoxPanel.setObjectName(("hLayoutframeBoxPanel"))
self.captionLabel = QLabel(self.frameBoxPanel)
sizePolicy = QSizePolicy(QSizePolicy.Fixed, QSizePolicy.Fixed)
sizePolicy.setHorizontalStretch(0)
sizePolicy.setVerticalStretch(0)
sizePolicy.setHeightForWidth(
self.captionLabel.sizePolicy().hasHeightForWidth())
self.captionLabel.setSizePolicy(sizePolicy)
self.captionLabel.setMinimumSize(QSize(200, 0))
self.captionLabel.setMaximumSize(QSize(200, 16777215))
font = QFont()
font.setBold(False)
font.setWeight(50)
self.captionLabel.setFont(font)
self.captionLabel.setObjectName(("captionLabel"))
self.hLayoutframeBoxPanel.addWidget(self.captionLabel)
self.frameBoxPanelIn = QFrame(self.frameBoxPanel)
self.frameBoxPanelIn.setFrameShape(QFrame.StyledPanel)
self.frameBoxPanelIn.setFrameShadow(QFrame.Raised)
self.frameBoxPanelIn.setObjectName(("frameBoxPanelIn"))
self.hLayoutframeBoxPanelIn = QHBoxLayout(self.frameBoxPanelIn)
self.hLayoutframeBoxPanelIn.setSpacing(0)
self.hLayoutframeBoxPanelIn.setMargin(0)
self.hLayoutframeBoxPanelIn.setObjectName(("hLayoutframeBoxPanelIn"))
self.comboBox = ComboBoxPanel(self.frameBoxPanelIn)
self.comboBox.Caption = "1"
self.comboBox.LabelWidth = 20
self.hLayoutframeBoxPanelIn.addWidget(self.comboBox)
# self.txtDistance = QLineEdit(self.frameBoxPanelIn)
# self.txtDistance.setEnabled(True)
# font = QFont()
# font.setBold(False)
# font.setWeight(50)
# self.txtDistance.setFont(font)
# self.txtDistance.setObjectName(("txtDistance"))
# self.txtDistance.setText("0.0")
# self.txtDistance.setMinimumWidth(70)
# self.txtDistance.setMaximumWidth(70)
# self.hLayoutframeBoxPanelIn.addWidget(self.txtDistance)
self.imageButton = QToolButton(self.frameBoxPanelIn)
self.imageButton.setText((""))
icon = QIcon()
icon.addPixmap(QPixmap(("Resource/coordinate_capture.png")),
QIcon.Normal, QIcon.Off)
self.imageButton.setIcon(icon)
self.imageButton.setObjectName(("btnDegreeBoxPanel"))
self.hLayoutframeBoxPanelIn.addWidget(self.imageButton)
self.hLayoutframeBoxPanel.addWidget(self.frameBoxPanelIn)
self.hLayoutBoxPanel.addWidget(self.frameBoxPanel)
spacerItem = QSpacerItem(10, 10, QSizePolicy.Expanding,
QSizePolicy.Minimum)
self.hLayoutBoxPanel.addItem(spacerItem)
self.imageButton.clicked.connect(self.imageButtonClicked)
define._canvas.renderComplete.connect(self.canvas_renderComplete)
self.connect(self.comboBox, SIGNAL("Event_0"), self.comboBox_Event_0)
self.flag = 0
self.dropDownType = mapScaleDropDownType
self.method_5()
self.imageButton.setVisible(False)
def comboBox_Event_0(self):
define._canvas.zoomScale(float(self.comboBox.SelectedItem))
def canvas_renderComplete(self):
self.comboBox.comboBox.setEditText(str(int(define._canvas.scale())))
def method_4(self, mapScaleDropDownType_0):
return (self.dropDownType
& mapScaleDropDownType_0) == mapScaleDropDownType_0
def method_5(self):
self.comboBox.Clear()
if (self.method_4(MapScaleDropDownType.Aerodrome)):
for i in range(2, 7):
num = i * 5000
self.comboBox.Add(str(num))
if (self.method_4(MapScaleDropDownType.Approach)):
for j in range(4, 20):
num1 = j * 50000
self.comboBox.Add(str(num1))
if (self.method_4(MapScaleDropDownType.Enroute)):
for k in range(2, 21):
num2 = k * 500000
self.comboBox.Add(str(num2))
# def method_6(self, string_0):
# value = None
# if self.distanceUnit == DistanceUnits.NM:
# value = self.txtDistance.text() + "nm"
# elif self.distanceUnit == DistanceUnits.M:
# value = self.txtDistance.text() + "m"
# elif self.distanceUnit == DistanceUnits.KM:
# value = self.txtDistance.text() + "km"
# elif self.distanceUnit == DistanceUnits.FT:
# value = self.txtDistance.text() + "ft"
# elif self.distanceUnit == DistanceUnits.MM:
# value = self.txtDistance.text() + "mm"
# else:
# value = ""
#
#
# return "%s%s\t%s"%(string_0, self.Caption, value);
def txtDistanceChanged(self):
try:
test = float(self.txtDistance.text())
self.emit(SIGNAL("Event_0"), self)
except:
str0 = "You must input the float type in \"%s\"." % (self.Caption)
QMessageBox.warning(self, "Warning", str0)
self.txtDistance.setText("0.0")
def imageButtonClicked(self):
measureDistanceTool = MeasureTool(define._canvas, self.txtDistance,
self.distanceUnit)
define._canvas.setMapTool(measureDistanceTool)
self.emit(SIGNAL("Event_1"), self)
def get_CaptionUnits(self):
return self.distanceUnit
def set_CaptionUnits(self, distanceUnit):
self.distanceUnit = distanceUnit
CaptionUnits = property(get_CaptionUnits, set_CaptionUnits, None, None)
def get_Caption(self):
caption = self.captionLabel.text()
findIndex = caption.indexOf("(")
if findIndex > 0:
val = caption.left(findIndex)
return val
return caption
def set_Caption(self, captionStr):
# if self.distanceUnit == DistanceUnits.NM:
# value = captionStr + "(nm)"
# elif self.distanceUnit == DistanceUnits.M:
# value = captionStr + "(m)"
# elif self.distanceUnit == DistanceUnits.KM:
# value = captionStr + "(km)"
# elif self.distanceUnit == DistanceUnits.FT:
# value = captionStr + "(ft)"
# elif self.distanceUnit == DistanceUnits.MM:
# value = captionStr + "(mm)"
# else:
# value = ""
self.captionLabel.setText(captionStr + ":")
Caption = property(get_Caption, set_Caption, None, None)
def get_dropDownType(self):
return self.dropDownType
def set_dropDownType(self, val):
self.dropDownType = val
DropDownType = property(get_dropDownType, set_dropDownType, None, None)
def get_Value(self):
try:
return self.comboBox.SelectedItem
except:
return ""
# def set_Value(self, value):
Value = property(get_Value, None, None, None)
# def get_IsEmpty(self):
# return self.txtDistance.text() == "" or self.txtDistance.text() == None
# IsEmpty = property(get_IsEmpty, None, None, None)
def set_LabelWidth(self, width):
self.captionLabel.setMinimumSize(QSize(width, 0))
self.captionLabel.setMaximumSize(QSize(width, 16777215))
LabelWidth = property(None, set_LabelWidth, None, None)
def get_ReadOnly(self):
return self.comboBox.isReadOnly()
def set_ReadOnly(self, bool):
self.comboBox.setReadOnly(bool)
ReadOnly = property(get_ReadOnly, set_ReadOnly, None, None)
def get_Enabled(self):
return self.comboBox.Enabled
def set_Enabled(self, bool):
self.comboBox.Enabled = bool
self.imageButton.setEnabled(bool)
Enabled = property(get_Enabled, set_Enabled, None, None)
def get_Visible(self):
return self.isVisible()
def set_Visible(self, bool):
self.setVisible(bool)
Visible = property(get_Visible, set_Visible, None, None)
def set_Button(self, imageName):
if imageName == None or imageName == "":
self.imageButton.setVisible(False)
return
icon = QIcon()
icon.addPixmap(QPixmap(("Resource/" + imageName)), QIcon.Normal,
QIcon.Off)
self.imageButton.setIcon(icon)
self.imageButton.setVisible(True)
Button = property(None, set_Button, None, None)
class DlgAixmProcLegsEx(QDialog):
def __init__(self, parent=None):
QDialog.__init__(self, parent)
self.resize(290, 136)
self.setWindowTitle("Procedure Legs (AIXM 4.5+)")
sizePolicy = QSizePolicy(QSizePolicy.Fixed, QSizePolicy.Fixed)
sizePolicy.setHorizontalStretch(0)
sizePolicy.setVerticalStretch(0)
sizePolicy.setHeightForWidth(self.sizePolicy().hasHeightForWidth())
self.setSizePolicy(sizePolicy)
verticalLayoutDlg = QVBoxLayout(self)
verticalLayoutDlg.setObjectName(("verticalLayoutDlg"))
self.gbAll = GroupBox(self, "HL")
self.gbAll.Caption = "Legs"
verticalLayoutDlg.addWidget(self.gbAll)
self.trvLegs = QTreeView(self.gbAll)
self.trvLegsStdModel = StandardItemModel()
self.trvLegs.setModel(self.trvLegsStdModel)
self.gbAll.Add = self.trvLegs
self.flowLayoutPanel1 = Frame(self.gbAll)
self.gbAll.Add = self.flowLayoutPanel1
self.btnAdd = QPushButton(self.flowLayoutPanel1)
icon = QIcon()
icon.addPixmap(QPixmap("Resource/add.png"), QIcon.Normal, QIcon.Off)
self.btnAdd.setIcon(icon)
self.flowLayoutPanel1.Add = self.btnAdd
self.btnRemove = QPushButton(self.flowLayoutPanel1)
icon = QIcon()
icon.addPixmap(QPixmap("Resource/remove.png"), QIcon.Normal, QIcon.Off)
self.btnRemove.setIcon(icon)
self.flowLayoutPanel1.Add = self.btnRemove
self.btnMoveUp = QPushButton(self.flowLayoutPanel1)
icon = QIcon()
icon.addPixmap(QPixmap("Resource/up.png"), QIcon.Normal, QIcon.Off)
self.btnMoveUp.setIcon(icon)
self.flowLayoutPanel1.Add = self.btnMoveUp
self.btnMoveDown = QPushButton(self.flowLayoutPanel1)
icon = QIcon()
icon.addPixmap(QPixmap("Resource/down.png"), QIcon.Normal, QIcon.Off)
self.btnMoveDown.setIcon(icon)
self.flowLayoutPanel1.Add = self.btnMoveDown
self.scrollBox = Frame(self.gbAll)
self.gbAll.Add = self.scrollBox
self.gbPosition = GroupBox(self.scrollBox)
self.gbPosition.Caption = "Fix"
self.scrollBox.Add = self.gbPosition
self.cmbPosUid = ComboBoxPanel(self.gbPosition)
self.cmbPosUid.Caption = "Position"
self.cmbPosUid.Button = "coordinate_capture.png"
self.gbPosition.Add = self.cmbPosUid
self.gbAttributes = GroupBox(self.scrollBox)
self.gbAttributes.Caption = "Attributes"
self.scrollBox.Add = self.gbAttributes
self.pnlPathType = ComboBoxPanel(self.gbAttributes)
self.pnlPathType.Caption = "Path Type"
self.gbAttributes.Add = self.pnlPathType
self.pnlLegType = ComboBoxPanel(self.gbAttributes)
self.pnlLegType.Caption = "Leg Type"
self.gbAttributes.Add = self.pnlLegType
self.cmbCenUid = ComboBoxPanel(self.gbAttributes)
self.cmbCenUid.Caption = "Center"
self.cmbCenUid.Button = "coordinate_capture.png"
self.gbAttributes.Add = self.cmbCenUid
self.pnlFlyBy = ComboBoxPanel(self.gbAttributes)
self.pnlFlyBy.Caption = "Fly-By"
self.gbAttributes.Add = self.pnlFlyBy
self.pnlMinAlt = AltitudeBoxPanel(self.gbAttributes)
self.pnlMinAlt.CaptionUnits = "ft"
self.pnlMinAlt.Caption = "Minimum Altitude"
self.gbAttributes.Add = self.pnlMinAlt
self.pnlSegLength = DistanceBoxPanel(self.gbAttributes,
DistanceUnits.NM)
self.pnlSegLength.Caption = "Segment Length"
self.gbAttributes.Add = self.pnlSegLength
self.pnlCourse = TrackRadialBoxPanel(self.gbAttributes)
self.pnlCourse.Caption = "Course"
self.gbAttributes.Add = self.pnlCourse
self.pnlLegVOR = Frame(self.gbAttributes)
self.gbAttributes.Add = self.pnlLegVOR
f1 = Frame(self.pnlLegVOR, "HL")
self.pnlLegVOR.Add = f1
self.cmbLegVor = ComboBoxPanel(f1)
self.cmbLegVor.Caption = "VOR / Radial (" + define._degreeStr + ")"
f1.Add = self.cmbLegVor
self.txtLegRadial = TrackRadialBoxPanel(f1)
self.txtLegRadial.Caption = ""
self.txtLegRadial.LabelWidth = 0
f1.Add = self.txtLegRadial
f2 = Frame(self.pnlLegVOR, "HL")
self.pnlLegVOR.Add = f2
self.cmbLegBackVor = ComboBoxPanel(f2)
self.cmbLegBackVor.Caption = "Reverse VOR / Radial (" + define._degreeStr + ")"
f2.Add = self.cmbLegBackVor
self.txtLegBackRadial = TrackRadialBoxPanel(f2)
self.txtLegBackRadial.Caption = ""
self.txtLegBackRadial.LabelWidth = 0
f2.Add = self.txtLegBackRadial
self.pnlPointType = ComboBoxPanel(self.gbAttributes)
self.pnlPointType.Caption = "Point Type"
self.gbAttributes.Add = self.pnlPointType
self.pnlRepPointType = ComboBoxPanel(self.gbAttributes)
self.pnlRepPointType.Caption = "Reporting Point Type"
self.gbAttributes.Add = self.pnlRepPointType
self.pnlPointVor = Frame(self.gbAttributes)
self.gbAttributes.Add = self.pnlPointVor
frame1 = Frame(self.pnlPointVor, "HL")
self.pnlPointVor.Add = frame1
self.cmbPointVor = ComboBoxPanel(frame1)
self.cmbPointVor.Caption = "Point VOR / Radial (" + define._degreeStr + ")"
frame1.Add = self.cmbPointVor
self.txtPointRadial = TrackRadialBoxPanel(frame1)
self.txtPointRadial.Caption = ""
self.txtPointRadial.LabelWidth = 0
frame1.Add = self.txtPointRadial
frame2 = Frame(self.pnlPointVor, "HL")
self.pnlPointVor.Add = frame2
self.cmbPointDme1 = ComboBoxPanel(frame2)
self.cmbPointDme1.Caption = "Point 1. DME / Distance (nm)"
frame2.Add = self.cmbPointDme1
self.txtPointDme1 = DistanceBoxPanel(frame2, DistanceUnits.NM)
self.txtPointDme1.Caption = ""
self.txtPointDme1.LabelWidth = 0
frame2.Add = self.txtPointDme1
frame3 = Frame(self.pnlPointVor, "HL")
self.pnlPointVor.Add = frame3
self.cmbPointDme2 = ComboBoxPanel(frame3)
self.cmbPointDme2.Caption = "Point 2. DME / Distance (nm)"
frame3.Add = self.cmbPointDme2
self.txtPointDme2 = DistanceBoxPanel(frame3, DistanceUnits.NM)
self.txtPointDme2.Caption = ""
self.txtPointDme2.LabelWidth = 0
frame3.Add = self.txtPointDme2
self.txtFlyDuration = TextBoxPanel(self.pnlPointVor, True)
self.txtFlyDuration.Caption = "Flying Time Duration"
self.pnlPointVor.Add = self.txtFlyDuration
self.txtRemarks = TextBoxPanel(self.pnlPointVor, True)
self.txtRemarks.Caption = "Remarks"
self.pnlPointVor.Add = self.txtRemarks
self.btnBoxOkCancel = QDialogButtonBox(self)
self.btnBoxOkCancel.setObjectName(("btnBoxOkCancel"))
self.btnBoxOkCancel.setStandardButtons(QDialogButtonBox.Cancel
| QDialogButtonBox.Ok)
self.connect(self.btnBoxOkCancel, SIGNAL("accepted()"), self.acceptDlg)
self.connect(self.btnBoxOkCancel, SIGNAL("rejected()"), self.reject)
self.btnAdd.clicked.connect(self.btnAdd_Click)
self.btnMoveDown.clicked.connect(self.btnMoveDown_Click)
self.btnMoveUp.clicked.connect(self.btnMoveUp_Click)
self.btnRemove.clicked.connect(self.btnRemove_Click)
verticalLayoutDlg.addWidget(self.btnBoxOkCancel)
self.trvLegs.pressed.connect(self.trvLegs_pressed)
self.data = None
self.legs = None
self.aerodrome = None
self.magnVar = 0.0
self.trvLegs.setHeaderHidden(True)
self.pnlPointType.Items = ["IAF", "IF", "FAF", "FAP", "MAPt", "TP"]
for value in CodeLegTypeAixm.Items:
self.pnlLegType.Add(value)
for value in CodePathTypeAixm.Items:
self.pnlPathType.Add(value)
for value in CodeRepAtcAixm.Items:
self.pnlRepPointType.Add(value)
for value in CodeTypeFlyByAixm.Items:
self.pnlFlyBy.Add(value)
self.method_6()
self.connect(self.txtRemarks, SIGNAL("Event_0"),
self.txtRemarks_Event_0)
self.connect(self.txtPointDme2, SIGNAL("Event_0"),
self.txtPointDme2_Event_0)
self.connect(self.cmbPointDme2, SIGNAL("Event_0"),
self.cmbPointDme2_Event_0)
self.connect(self.txtPointDme1, SIGNAL("Event_0"),
self.txtPointDme1_Event_0)
self.connect(self.cmbPointDme1, SIGNAL("Event_0"),
self.cmbPointDme1_Event_0)
self.connect(self.cmbPointVor, SIGNAL("Event_0"),
self.cmbPointVor_Event_0)
self.connect(self.txtPointRadial, SIGNAL("Event_0"),
self.txtPointRadial_Event_0)
self.connect(self.txtFlyDuration, SIGNAL("Event_0"),
self.txtFlyDuration_Event_0)
self.connect(self.pnlRepPointType, SIGNAL("Event_0"),
self.pnlRepPointType_Event_0)
self.connect(self.pnlPointType, SIGNAL("Event_0"),
self.pnlPointType_Event_0)
self.connect(self.txtLegBackRadial, SIGNAL("Event_0"),
self.txtLegBackRadial_Event_0)
self.connect(self.cmbLegBackVor, SIGNAL("Event_0"),
self.cmbLegBackVor_Event_0)
self.connect(self.cmbLegVor, SIGNAL("Event_0"), self.cmbLegVor_Event_0)
self.connect(self.txtLegRadial, SIGNAL("Event_0"),
self.txtLegRadial_Event_0)
self.connect(self.pnlCourse, SIGNAL("Event_0"), self.pnlCourse_Event_0)
self.connect(self.pnlSegLength, SIGNAL("Event_0"),
self.pnlSegLength_Event_0)
self.connect(self.pnlMinAlt, SIGNAL("Event_0"), self.pnlMinAlt_Event_0)
self.connect(self.pnlFlyBy, SIGNAL("Event_0"), self.pnlFlyBy_Event_0)
self.connect(self.cmbCenUid, SIGNAL("Event_0"), self.cmbCenUid_Event_0)
self.connect(self.pnlLegType, SIGNAL("Event_0"),
self.pnlLegType_Event_0)
self.connect(self.pnlPathType, SIGNAL("Event_0"),
self.pnlPathType_Event_0)
self.connect(self.cmbPosUid, SIGNAL("Event_0"), self.cmbPosUid_Event_0)
self.connect(self.cmbCenUid, SIGNAL("Event_3"), self.method_14)
self.connect(self.cmbPosUid, SIGNAL("Event_3"), self.method_13)
# self.cmbCenter.imageButton.clicked.connect(self.method_14)
# self.cmbFixPos.imageButton.clicked.connect(self.method_13)
def btnAdd_Click(self):
if (len(self.trvLegs.selectedIndexes()) == 0 and not self.method_5()):
return
listInsertPosition = ListInsertPosition.Append
resultDlg, listInsertPosition = DlgAixmInsertLeg.smethod_0(
listInsertPosition)
if (self.trvLegsStdModel.rowCount() > 0 and not resultDlg):
return
count = self.trvLegsStdModel.rowCount()
if (listInsertPosition == ListInsertPosition.Before):
count = self.trvLegs.selectedIndexes()[0].row()
elif (listInsertPosition == ListInsertPosition.After):
count = self.trvLegs.selectedIndexes()[0].row() + 1
self.trvLegsStdModel.setItem(
self.trvLegsStdModel.rowCount(),
QStandardItem(str(self.trvLegsStdModel.rowCount() + 1)))
self.legs.insert(count, DataBaseProcedureLegEx())
self.trvLegs.setCurrentIndex(self.trvLegsStdModel.index(count, 0))
self.trvLegs_pressed()
def btnMoveDown_Click(self):
if (len(self.trvLegs.selectedIndexes()) == 0):
return
index = self.trvLegs.selectedIndexes()[0].row()
item = self.legs[index]
self.legs.pop(index)
self.legs.insert(index + 1, item)
self.trvLegs.setCurrentIndex(self.trvLegsStdModel.index(index + 1, 0))
self.trvLegs_pressed()
def btnMoveUp_Click(self):
if (len(self.trvLegs.selectedIndexes()) == 0):
return
index = self.trvLegs.selectedIndexes()[0].row()
item = self.legs[index]
self.legs.pop(index)
self.legs.insert(index - 1, item)
self.trvLegs.setCurrentIndex(self.trvLegsStdModel.index(index - 1, 0))
self.trvLegs_pressed()
def btnRemove_Click(self):
item = None
if (len(self.trvLegs.selectedIndexes()) == 0):
return
if (QMessageBox.question(
self, "Question",
"Are you sure you want to delete the selected procedure leg?",
QMessageBox.Yes | QMessageBox.No) == QMessageBox.Yes):
index = self.trvLegs.selectedIndexes()[0].row()
self.legs.pop(index)
self.trvLegsStdModel.takeRow(self.trvLegsStdModel.rowCount() - 1)
if (index >= self.trvLegsStdModel.rowCount() - 1):
index -= 1
# treeView = self.trvLegs;
# if (index >= 0):
if self.trvLegsStdModel.rowCount() > 0 and index < 0:
index = 0
self.trvLegs.setCurrentIndex(self.trvLegsStdModel.index(index, 0))
self.trvLegs_pressed()
def cmbPosUid_Event_0(self):
self.txtFlyDuration_TextChanged(self.cmbPosUid)
def txtRemarks_Event_0(self):
self.txtFlyDuration_TextChanged(self.txtRemarks)
def txtPointDme2_Event_0(self):
self.txtFlyDuration_TextChanged(self.txtPointDme2)
def cmbPointDme2_Event_0(self):
self.txtFlyDuration_TextChanged(self.cmbPointDme2)
def txtPointDme1_Event_0(self):
self.txtFlyDuration_TextChanged(self.txtPointDme1)
def cmbPointDme1_Event_0(self):
self.txtFlyDuration_TextChanged(self.cmbPointDme1)
def cmbPointVor_Event_0(self):
self.txtFlyDuration_TextChanged(self.cmbPointVor)
def txtPointRadial_Event_0(self):
self.txtFlyDuration_TextChanged(self.txtPointRadial)
def txtFlyDuration_Event_0(self):
self.txtFlyDuration_TextChanged(self.txtFlyDuration)
def pnlRepPointType_Event_0(self):
self.txtFlyDuration_TextChanged(self.pnlRepPointType)
def pnlPointType_Event_0(self):
self.txtFlyDuration_TextChanged(self.pnlPointType)
def txtLegBackRadial_Event_0(self):
self.txtFlyDuration_TextChanged(self.txtLegBackRadial)
def cmbLegBackVor_Event_0(self):
self.txtFlyDuration_TextChanged(self.cmbLegBackVor)
def cmbLegVor_Event_0(self):
self.txtFlyDuration_TextChanged(self.cmbLegVor)
def txtLegRadial_Event_0(self):
self.txtFlyDuration_TextChanged(self.txtLegRadial)
def pnlCourse_Event_0(self):
self.txtFlyDuration_TextChanged(self.pnlCourse)
def pnlSegLength_Event_0(self):
self.txtFlyDuration_TextChanged(self.pnlSegLength)
def pnlMinAlt_Event_0(self):
self.txtFlyDuration_TextChanged(self.pnlMinAlt)
def pnlFlyBy_Event_0(self):
self.txtFlyDuration_TextChanged(self.pnlFlyBy)
def cmbCenUid_Event_0(self):
self.txtFlyDuration_TextChanged(self.cmbCenUid)
def pnlLegType_Event_0(self):
self.txtFlyDuration_TextChanged(self.pnlLegType)
def pnlPathType_Event_0(self):
self.txtFlyDuration_TextChanged(self.pnlPathType)
def trvLegs_pressed(self):
self.method_6()
self.method_8()
def acceptDlg(self):
self.legs.refresh()
QObject.emit(self, SIGNAL("DlgAixmProcLegs_Smethod_0_Event"),
self.legs, self.data)
self.accept()
def method_6(self):
self.btnOK = self.btnBoxOkCancel.button(QDialogButtonBox.Ok)
self.btnOK.setEnabled(len(self.trvLegs.selectedIndexes()) > 0)
self.btnRemove.setEnabled(len(self.trvLegs.selectedIndexes()) > 0)
self.btnMoveUp.setEnabled(
(len(self.trvLegs.selectedIndexes()) > 0
and self.trvLegs.selectedIndexes()[0].row() != 0) and True
or False)
self.btnMoveDown.setEnabled(
(len(self.trvLegs.selectedIndexes()) <= 0
or self.trvLegsStdModel.rowCount() <= 0) and False
or ((len(self.trvLegs.selectedIndexes()) > 0)
and self.trvLegs.selectedIndexes()[0].row() <
self.trvLegsStdModel.rowCount() - 1))
def method_7(self):
for i in range(self.legs.Count):
num = i + 1
self.trvLegsStdModel.setItem(i, QStandardItem(str(num)))
self.method_6()
def method_8(self):
if (self.trvLegs.selectedIndexes() == None
or len(self.trvLegs.selectedIndexes()) == 0):
self.scrollBox.Enabled = False
self.cmbPosUid.SelectedIndex = -1
self.pnlPathType.SelectedIndex = -1
self.pnlLegType.SelectedIndex = -1
self.cmbCenUid.SelectedIndex = -1
self.pnlFlyBy.SelectedIndex = -1
self.pnlMinAlt.Value = None
self.pnlSegLength.Value = None
self.pnlCourse.Value = None
self.cmbLegVor.SelectedIndex = -1
self.txtLegRadial.Value = 0
self.cmbLegBackVor.SelectedIndex = -1
self.txtLegBackRadial.Value = 0
self.pnlPointType.Value = ""
self.pnlRepPointType.SelectedIndex = -1
self.cmbPointVor.SelectedIndex = -1
self.txtPointRadial.Value = 0
self.cmbPointDme1.SelectedIndex = -1
self.txtPointDme1.Value = None
self.cmbPointDme2.SelectedIndex = -1
self.txtPointDme2.Value = None
self.txtFlyDuration.Value = ""
self.txtRemarks.Value = ""
return
self.scrollBox.Enabled = True
item = self.legs[self.trvLegs.selectedIndexes()[0].row()]
if (item.PointEnt == None):
self.cmbPosUid.SelectedIndex = -1
else:
self.cmbPosUid.SelectedIndex = self.cmbPosUid.IndexOf(
item.PointEnt)
self.pnlPathType.SelectedIndex = self.method_10(
self.pnlPathType.Items, item.CodePathType)
self.pnlLegType.SelectedIndex = self.method_10(self.pnlLegType.Items,
item.CodeLegType)
if (item.CodeLegType != CodeLegTypeAixm.CCA):
if (item.CodeLegType == CodeLegTypeAixm.CWA):
if (item.CenterEnt == None):
self.cmbCenUid.SelectedIndex = -1
else:
self.cmbCenUid.SelectedIndex = self.cmbCenUid.IndexOf(
item.CenterEnt)
self.cmbCenUid.Visible = True
else:
self.cmbCenUid.SelectedIndex = -1
self.cmbCenUid.Visible = False
# goto Label0;
else:
# Label2:
if (item.CenterEnt == None):
self.cmbCenUid.SelectedIndex = -1
else:
self.cmbCenUid.SelectedIndex = self.cmbCenUid.IndexOf(
item.CenterEnt)
self.cmbCenUid.Visible = True
# Label0:
self.pnlFlyBy.SelectedIndex = self.method_10(self.pnlFlyBy.Items,
item.CodeFlyBy)
self.pnlMinAlt.Value = item.ValMinAlt
self.pnlSegLength.Value = item.ValDist
self.pnlCourse.Value = item.ValCourse
if (item.VorUidLeg == None):
self.cmbLegVor.SelectedIndex = -1
else:
self.cmbLegVor.SelectedIndex = self.cmbLegVor.IndexOf(
item.VorUidLeg)
self.txtLegRadial.Value = item.ValLegRadial
if (item.VorUidLegBack == None):
self.cmbLegBackVor.SelectedIndex = -1
else:
self.cmbLegBackVor.SelectedIndex = self.cmbLegBackVor.IndexOf(
item.VorUidLegBack)
self.txtLegBackRadial.Value = item.ValLegRadialBack
self.pnlPointType.Value = item.CodePointType
self.pnlRepPointType.SelectedIndex = self.method_10(
self.pnlRepPointType.Items, item.CodeRepAtc)
if (item.VorUidPoint == None):
self.cmbPointVor.SelectedIndex = -1
else:
self.cmbPointVor.SelectedIndex = self.cmbPointVor.IndexOf(
item.VorUidPoint)
self.txtPointRadial.Value = item.ValPointRadial
if (item.UidPointDist1 == None):
self.cmbPointDme1.SelectedIndex = -1
else:
self.cmbPointDme1.SelectedIndex = self.cmbPointDme1.IndexOf(
item.UidPointDist1)
self.txtPointDme1.Value = item.ValPointDist1
if (item.UidPointDist2 == None):
self.cmbPointDme2.SelectedIndex = -1
else:
self.cmbPointDme2.SelectedIndex = self.cmbPointDme2.IndexOf(
item.UidPointDist2)
self.txtPointDme2.Value = item.ValPointDist2
self.txtFlyDuration.Value = item.ValDur
self.txtRemarks.Value = item.TxtRmk
def method_9(self, ilist_0, string_0):
for i in range(len(ilist_0)):
if (String.StartsWith(ilist_0[i], string_0)):
return i
return -1
def method_10(self, ilist_0, string_0):
for i in range(len(ilist_0)):
if (String.Equals(ilist_0[i], string_0)):
return i
return -1
def txtFlyDuration_TextChanged(self, sender):
if (self.trvLegs.selectedIndexes() == None
or len(self.trvLegs.selectedIndexes()) == 0):
return
item = self.legs[self.trvLegs.selectedIndexes()[0].row()]
if (sender == self.cmbPosUid):
item.PointEnt = self.cmbPosUid.SelectedItem
return
if (sender == self.pnlPathType):
item.CodePathType = self.pnlPathType.SelectedItem
return
if (sender == self.pnlLegType):
item.CodeLegType = self.pnlLegType.SelectedItem
self.cmbCenUid.Visible = (
item.CodeLegType == CodeLegTypeAixm.CCA
) and True or item.CodeLegType == CodeLegTypeAixm.CWA
return
if (sender == self.cmbCenUid):
item.CenterEnt = self.cmbCenUid.SelectedItem
return
if (sender == self.pnlFlyBy):
item.CodeFlyBy = self.pnlFlyBy.SelectedItem
return
if (sender == self.pnlMinAlt):
item.ValMinAlt = self.pnlMinAlt.Value
return
if (sender == self.pnlSegLength):
item.ValDist = self.pnlSegLength.Value
return
if (sender == self.pnlCourse):
item.ValCourse = self.pnlCourse.Value
return
if (sender == self.cmbLegVor):
item.VorUidLeg = self.cmbLegVor.SelectedItem
return
if (sender == self.txtLegRadial):
item.ValLegRadial = self.txtLegRadial.Value
return
if (sender == self.cmbLegBackVor):
item.VorUidLegBack = self.cmbLegBackVor.SelectedItem
return
if (sender == self.txtLegBackRadial):
item.ValLegRadialBack = self.txtLegBackRadial.Value
return
if (sender == self.pnlPointType):
item.CodePointType = self.pnlPointType.SelectedItem
return
if (sender == self.pnlRepPointType):
item.CodeRepAtc = self.pnlRepPointType.SelectedItem
return
if (sender == self.cmbPointVor):
item.VorUidPoint = self.cmbPointVor.SelectedItem
return
if (sender == self.txtPointRadial):
item.ValPointRadial = self.txtPointRadial.Value
return
if (sender == self.cmbPointDme1):
item.UidPointDist1 = self.cmbPointDme1.SelectedItem
return
if (sender == self.txtPointDme1):
item.ValPointDist1 = self.txtPointDme1.Value
return
if (sender == self.cmbPointDme2):
item.UidPointDist2 = self.cmbPointDme2.SelectedItem
return
if (sender == self.txtPointDme2):
item.ValPointDist2 = self.txtPointDme2.Value
return
if (sender == self.txtFlyDuration):
item.ValDur = self.txtFlyDuration.Value
return
if (sender == self.txtRemarks):
item.TxtRmk = self.txtRemarks.Value
def method_13(self):
point3d = None
procEntityBase = None
selectTool = DlgAixmSelectPosition.smethod_0(
self.data, point3d, ProcEntityListType.FixesEx)
QObject.connect(selectTool,
SIGNAL("DlgAixmSelectPosition_Smethod_0_Event"),
self.method_13_Event)
def method_13_Event(self, flag, procEntityBase):
# flag, procEntityBase = DlgAixmSelectPosition.smethod_0(self.data, point3d, ProcEntityListType.Fixes)
if (flag and procEntityBase != None):
if (not self.cmbPosUid.Contains(procEntityBase)):
self.cmbPosUid.Add(procEntityBase)
self.cmbPosUid.SelectedIndex = self.cmbPosUid.IndexOf(
procEntityBase)
self.txtFlyDuration_TextChanged(self.cmbPosUid)
def method_14(self):
point3d = None
procEntityBase = None
selectTool = DlgAixmSelectPosition.smethod_0(
self.data, point3d, ProcEntityListType.CentersEx)
QObject.connect(selectTool,
SIGNAL("DlgAixmSelectPosition_Smethod_0_Event"),
self.method_14_Event)
def method_14_Event(self, flag, procEntityBase):
# flag, procEntityBase = DlgAixmSelectPosition.smethod_0(self.data, point3d, ProcEntityListType.Centers)
if (flag and procEntityBase != None):
if (not self.cmbCenUid.Contains(procEntityBase)):
self.cmbCenUid.Add(procEntityBase)
self.cmbCenUid.SelectedIndex = self.cmbCenUid.IndexOf(
procEntityBase)
self.txtFlyDuration_TextChanged(self.cmbCenUid)
@staticmethod
def smethod_0(parent, dataBaseProcedureLegsEx_0, dataBaseProcedureData_0,
procEntityAHP_0):
flag = False
dlgAixmProcLegsEx = DlgAixmProcLegsEx(parent)
dlgAixmProcLegsEx.legs = dataBaseProcedureLegsEx_0
dlgAixmProcLegsEx.data = dataBaseProcedureData_0
if (procEntityAHP_0 != None):
dlgAixmProcLegsEx.aerodrome = procEntityAHP_0
dlgAixmProcLegsEx.magnVar = procEntityAHP_0.ValMagVar
dataBaseProcedureData_0.method_59(dlgAixmProcLegsEx.cmbPosUid,
ProcEntityListType.FixesEx)
dataBaseProcedureData_0.method_59(dlgAixmProcLegsEx.cmbCenUid,
ProcEntityListType.CentersEx)
dataBaseProcedureData_0.method_59(dlgAixmProcLegsEx.cmbLegVor,
ProcEntityListType.VORs)
dataBaseProcedureData_0.method_59(dlgAixmProcLegsEx.cmbLegBackVor,
ProcEntityListType.VORs)
dataBaseProcedureData_0.method_59(dlgAixmProcLegsEx.cmbPointVor,
ProcEntityListType.VORs)
dataBaseProcedureData_0.method_59(dlgAixmProcLegsEx.cmbPointDme1,
ProcEntityListType.DMEs)
dataBaseProcedureData_0.method_59(dlgAixmProcLegsEx.cmbPointDme2,
ProcEntityListType.DMEs)
if (len(dlgAixmProcLegsEx.legs) == 0):
dlgAixmProcLegsEx.legs.append(DataBaseProcedureLegEx())
dlgAixmProcLegsEx.method_7()
if dlgAixmProcLegsEx.trvLegsStdModel.rowCount() > 0:
dlgAixmProcLegsEx.trvLegs.setCurrentIndex(
dlgAixmProcLegsEx.trvLegsStdModel.index(0, 0))
dlgAixmProcLegsEx.method_6()
dlgAixmProcLegsEx.method_8()
dlgAixmProcLegsEx.show()
return dlgAixmProcLegsEx
class DlgAixmHolding(QDialog):
def __init__(self, parent = None):
QDialog.__init__(self, parent)
self.resize(290, 136);
self.setWindowTitle("Instrument Approach Procedure (IAP)")
sizePolicy = QSizePolicy(QSizePolicy.Fixed, QSizePolicy.Fixed);
sizePolicy.setHorizontalStretch(0);
sizePolicy.setVerticalStretch(0);
sizePolicy.setHeightForWidth(self.sizePolicy().hasHeightForWidth());
self.setSizePolicy(sizePolicy);
verticalLayoutDlg = QVBoxLayout(self)
verticalLayoutDlg.setObjectName(("verticalLayoutDlg"));
self.groupBox = GroupBox(self)
verticalLayoutDlg.addWidget(self.groupBox)
self.pnlBasedOn = ComboBoxPanel(self.groupBox)
self.pnlBasedOn.Caption = "Based On"
self.pnlBasedOn.Button = "coordinate_capture.png"
self.groupBox.Add = self.pnlBasedOn
self.pnlType = ComboBoxPanel(self.groupBox)
self.pnlType.Caption = "Type"
self.groupBox.Add = self.pnlType
self.txtDescription = TextBoxPanel(self.groupBox, True)
self.txtDescription.Caption = "Description"
self.groupBox.Add = self.txtDescription
self.txtRemarks = TextBoxPanel(self.groupBox, True)
self.txtRemarks.Caption = "Remarks"
self.groupBox.Add = self.txtRemarks
self.btnBoxOkCancel = QDialogButtonBox(self)
self.btnBoxOkCancel.setObjectName(("btnBoxOkCancel"));
self.btnBoxOkCancel.setStandardButtons(QDialogButtonBox.Cancel|QDialogButtonBox.Ok);
self.connect(self.btnBoxOkCancel, SIGNAL("accepted()"), self.acceptDlg)
self.connect(self.btnBoxOkCancel, SIGNAL("rejected()"), self.reject)
self.connect(self.pnlBasedOn, SIGNAL("Event_3"), self.pnlBasedOn_Event_3)
verticalLayoutDlg.addWidget(self.btnBoxOkCancel)
self.data = None
self.table = None
self.selected = None;
self.CaptureCoordTool = CaptureCoordinateToolUpdate(define._canvas)
self.connect(self.CaptureCoordTool, SIGNAL("resultPointValueList"), self.resultPointValueListMethod)
def pnlBasedOn_Event_3(self):
CaptureCoordTool = CaptureCoordinateToolUpdate(define._canvas)
self.connect(CaptureCoordTool, SIGNAL("resultPointValueList"), self.resultPointValueListMethod)
define._canvas.setMapTool(self.CaptureCoordTool)
def resultPointValueListMethod(self, resultValueList):
if len(resultValueList) > 0:
point3d = Point3D(float(resultValueList[1]), float(resultValueList[2]), float(resultValueList[3]))
resultDlg, procEntityBase = DlgAixmSelectPosition.smethod_0(self, self.data, point3d, ProcEntityListType.Holding)
if (resultDlg and procEntityBase != None):
if (not self.pnlBasedOn.Contains(procEntityBase)):
self.pnlBasedOn.Add(procEntityBase);
self.pnlBasedOn.SelectedIndex = self.pnlBasedOn.IndexOf(procEntityBase);
def acceptDlg(self):
selectedItem = self.pnlBasedOn.SelectedItem;
codeTypeHoldProcAixm = self.pnlType.SelectedItem
for row in self.table:
flag = True;
if (self.selected != None and row == self.selected):
flag = False;
if (row["basedOnEnt"] != selectedItem):
flag = False;
if (row["codeType"] != codeTypeHoldProcAixm):
flag = False;
if (not flag):
continue;
strS = "Cannot create a duplicate procedure entry.\n\nBased on = {0}\nType = {1}".format(self.pnlBasedOn.SelectedItem, self.pnlType.SelectedItem);
QMessageBox.warning(self, "Error", strS);
return;
self.accept()
def method_6(self):
pass
@staticmethod
def smethod_0(dataBaseHoldings_0, dataBaseProcedureData_0, dataRow_0):
flag = False;
dlgAixmHolding = DlgAixmHolding()
dlgAixmHolding.data = dataBaseProcedureData_0;
dlgAixmHolding.table = dataBaseHoldings_0;
dlgAixmHolding.selected = dataRow_0;
dataBaseProcedureData_0.method_59(dlgAixmHolding.pnlBasedOn, ProcEntityListType.Holding);
dlgAixmHolding.pnlType.Items = CodeTypeHoldProcAixm.Items;
if (dataRow_0 != None and len(dataRow_0) > 0):
dlgAixmHolding.pnlBasedOn.SelectedIndex = dlgAixmHolding.pnlBasedOn.IndexOf(dataRow_0["basedOnEnt"]);
dlgAixmHolding.pnlType.SelectedIndex = dlgAixmHolding.pnlType.method_3(dataRow_0["codeType"]);
if (dataRow_0["txtDescr"] != None):
dlgAixmHolding.txtDescription.Value = dataRow_0["txtDescr"];
if (dataRow_0["txtRmk"] != None):
dlgAixmHolding.txtRemarks.Value = dataRow_0["txtRmk"];
resultDlg = dlgAixmHolding.exec_()
if (resultDlg == 1):
dataRow0 = dataRow_0 == None or len(dataRow_0) == 0;
strS = [];
if (not dataRow0):
for a in dataBaseHoldings_0.nameList:
strS.append(None)
# str = new string[dataBaseHoldings_0.Columns.Count];
i = 0
for name in dataBaseHoldings_0.nameList:
strS[i] = dataRow_0[name]
i += 1
else:
dataRow_0 = dataBaseHoldings_0.NewRow();
dataRow_0["basedOnEnt"] = dlgAixmHolding.pnlBasedOn.SelectedItem;
if (dataRow0):
dataRow_0["oldBasedOnEnt"] = dataRow_0["basedOnEnt"];
dataRow_0["codeType"] = dlgAixmHolding.pnlType.SelectedItem;
if (dataRow0):
dataRow_0["oldCodeType"] = dataRow_0["codeType"];
if (not String.IsNullOrEmpty(dlgAixmHolding.txtDescription.Value)):
dataRow_0["txtDescr"] = dlgAixmHolding.txtDescription.Value;
else:
dataRow_0["txtDescr"] = None;
if (not String.IsNullOrEmpty(dlgAixmHolding.txtRemarks.Value)):
dataRow_0["txtRmk"] = dlgAixmHolding.txtRemarks.Value;
else:
dataRow_0["txtRmk"] = None;
if (dataRow0):
dataRow_0["procLegs"] = DataBaseProcedureLegs();
dataRow_0["procLegsEx"] = DataBaseProcedureLegsEx();
if (not dataRow0):
num = 1;
while (num < len(strS)):
if (not strS[num] == dataRow_0[dataRow_0.nameList[num]]):
dataRow_0["changed"] = "True";
if (dataRow0):
dataBaseHoldings_0.RowsAdd(dataRow_0);
flag = True;
return flag;
else:
num += 1;
else:
dataRow_0["new"] = "True";
if (dataRow0):
dataBaseHoldings_0.RowsAdd(dataRow_0);
flag = True;
return flag;
return flag
class DlgChartingTemplate(QDialog):
def __init__(self, parent=None):
QDialog.__init__(self, parent)
self.resize(100, 70)
self.setWindowTitle("Template Properties")
sizePolicy = QSizePolicy(QSizePolicy.Fixed, QSizePolicy.Fixed)
sizePolicy.setHorizontalStretch(0)
sizePolicy.setVerticalStretch(0)
sizePolicy.setHeightForWidth(self.sizePolicy().hasHeightForWidth())
self.setSizePolicy(sizePolicy)
verticalLayoutDlg = QVBoxLayout(self)
verticalLayoutDlg.setObjectName(("verticalLayoutDlg"))
self.groupBox1 = GroupBox(self)
self.groupBox1.Caption = ""
verticalLayoutDlg.addWidget(self.groupBox1)
self.pnlSpace = ComboBoxPanel(self.groupBox1)
self.pnlSpace.Caption = "Target Space"
self.pnlSpace.LabelWidth = 120
self.groupBox1.Add = self.pnlSpace
self.pnlDwg = TextBoxPanel(self.groupBox1)
self.pnlDwg.Caption = "Drawing File"
self.pnlDwg.LabelWidth = 120
self.groupBox1.Add = self.pnlDwg
self.pnlTitle = TextBoxPanel(self.groupBox1)
self.pnlTitle.Caption = "Titlee"
self.pnlTitle.LabelWidth = 120
self.groupBox1.Add = self.pnlTitle
self.btnBoxOkCancel = QDialogButtonBox(self)
self.btnBoxOkCancel.setObjectName(("btnBoxOkCancel"))
self.btnBoxOkCancel.setStandardButtons(QDialogButtonBox.Cancel
| QDialogButtonBox.Ok)
# btnOK = self.btnBoxOkCancel.button(QDialogButtonBox.Ok)
# btnOK.setText("Create")
self.connect(self.btnBoxOkCancel, SIGNAL("accepted()"), self.acceptDlg)
self.connect(self.btnBoxOkCancel, SIGNAL("rejected()"), self.reject)
verticalLayoutDlg.addWidget(self.btnBoxOkCancel)
self.pnlSpace.Add(DrawingSpace.ModelSpace)
self.pnlSpace.Add(DrawingSpace.PaperSpace)
self.pnlSpace.SelectedIndex = 1
# if (String.IsNullOrEmpty(self.pnlDwg.Value)):
# # DlgChartingTemplate height = self
# # height.Height = height.Height - self.pnlDwg.Height
# self.pnlDwg.Visible = False
# self.pnlCodeType.Items = CodeTypeDesigPtAixm.Items
def acceptDlg(self):
self.accept()
def get_TemplateDrawing(self):
return self.pnlDwg.Value
def set_TemplateDrawing(self, val):
self.pnlDwg.Value = val
TemplateDrawing = property(get_TemplateDrawing, set_TemplateDrawing, None,
None)
def get_TemplateSpace(self):
if (self.pnlSpace.SelectedIndex == 0):
return DrawingSpace.ModelSpace
return DrawingSpace.PaperSpace
def set_TemplateSpace(self, val):
if (val == DrawingSpace.ModelSpace):
self.pnlSpace.SelectedIndex = 0
return
self.pnlSpace.SelectedIndex = 1
TemplateSpace = property(get_TemplateSpace, set_TemplateSpace, None, None)
def get_TemplateTitle(self):
return self.pnlTitle.Value
def set_TemplateTitle(self, val):
self.pnlTitle.Value = val
TemplateTitle = property(get_TemplateTitle, set_TemplateTitle, None, None)
@staticmethod
def smethod_0(parent, string_0, drawingSpace_0, string_1):
flag = False
dlgChartingTemplate = DlgChartingTemplate(parent)
dlgChartingTemplate.TemplateTitle = string_0
dlgChartingTemplate.TemplateDrawing = string_1
dlgChartingTemplate.TemplateSpace = drawingSpace_0
result = dlgChartingTemplate.exec_()
if (not result):
flag = False
else:
string_0 = dlgChartingTemplate.TemplateTitle
drawingSpace_0 = dlgChartingTemplate.TemplateSpace
flag = True
return flag, string_0, drawingSpace_0
@staticmethod
def smethod_1(parent, string_0, drawingSpace_0):
flag = False
dlgChartingTemplate = DlgChartingTemplate(parent)
dlgChartingTemplate.TemplateTitle = string_0
dlgChartingTemplate.TemplateSpace = drawingSpace_0
result = dlgChartingTemplate.exec_()
if (not result):
flag = False
else:
string_0 = dlgChartingTemplate.TemplateTitle
drawingSpace_0 = dlgChartingTemplate.TemplateSpace
flag = True
return flag, string_0, drawingSpace_0
class SelectProcedureForm(QDialog):
def __init__(self, parent=None):
QDialog.__init__(self)
self.setObjectName(("ui_ProjectMngForm"))
self.resize(200, 200)
font = QFont()
font.setFamily(("Arial"))
font.setBold(False)
font.setWeight(50)
self.setFont(font)
self.setWindowTitle("Open Procedure")
self.vlForm = QVBoxLayout(self)
self.vlForm.setObjectName(("vl_ProjectMngForm"))
self.vlForm.setSpacing(9)
self.vlForm.setMargin(9)
self.basicFrame = Frame(self)
self.vlForm.addWidget(self.basicFrame)
self.comboUser = ComboBoxPanel(self.basicFrame)
self.comboUser.Caption = "Select User"
self.comboUser.LabelWidth = 120
self.comboUser.Width = 200
self.basicFrame.Add = self.comboUser
self.comboAIP = ComboBoxPanel(self.basicFrame)
self.comboAIP.Caption = "AIP Chart"
self.comboAIP.LabelWidth = 120
self.comboAIP.Width = 200
self.basicFrame.Add = self.comboAIP
self.comboProject = ComboBoxPanel(self.basicFrame)
self.comboProject.Caption = "Project"
self.comboProject.LabelWidth = 120
self.comboProject.Width = 200
self.basicFrame.Add = self.comboProject
self.comboSubproject = ComboBoxPanel(self.basicFrame)
self.comboSubproject.Caption = "Sub-Project"
self.comboSubproject.LabelWidth = 120
self.comboSubproject.Width = 200
self.basicFrame.Add = self.comboSubproject
self.comboWorkspace = ComboBoxPanel(self.basicFrame)
self.comboWorkspace.Caption = "Workspace"
self.comboWorkspace.LabelWidth = 120
self.comboWorkspace.Width = 200
self.basicFrame.Add = self.comboWorkspace
self.comboProcedure = ComboBoxPanel(self.basicFrame)
self.comboProcedure.Caption = "Procedure"
self.comboProcedure.LabelWidth = 120
self.comboProcedure.Width = 200
self.basicFrame.Add = self.comboProcedure
self.btnFrame = Frame(self.basicFrame, "HL")
self.basicFrame.Add = self.btnFrame
self.buttonStart = QPushButton(self.btnFrame)
self.buttonStart.setObjectName("buttonStart")
self.buttonStart.setText("Start")
self.btnFrame.Add = self.buttonStart
self.buttonCalcel = QPushButton(self.btnFrame)
self.buttonCalcel.setObjectName("buttonCalcel")
self.buttonCalcel.setText("Cancel")
self.btnFrame.Add = self.buttonCalcel
self.connect(self.comboProject, SIGNAL("Event_0"),
self.comboProject_SelectedIndexChanged)
self.connect(self.comboSubproject, SIGNAL("Event_0"),
self.comboSubproject_SelectedIndexChanged)
self.connect(self.comboWorkspace, SIGNAL("Event_0"),
self.comboWorkspace_SelectedIndexChanged)
self.buttonStart.clicked.connect(self.buttonStart_Click)
self.buttonCalcel.clicked.connect(self.buttonCalcel_Click)
for ui in AirCraftOperation.g_userList.ListUserInfo:
self.comboUser.Add(ui.Name)
for pi in AirCraftOperation.g_projectList.ProjectsList:
if (pi.Pt == enumProjectType.ptAipChart):
self.comboAIP.Add(pi.Name)
elif (pi.Pt == enumProjectType.ptProject):
self.comboProject.Add(pi.Name)
self.comboUser.SelectedIndex = 0
self.comboAIP.SelectedIndex = 0
self.comboProject.SelectedIndex = 0
def comboUser_SelectedIndexChanged(self):
pass
def buttonCalcel_Click(self):
self.reject()
def buttonStart_Click(self):
index = AirCraftOperation.g_projectList.FindByName(
self.comboAIP.SelectedItem, enumProjectType.ptAipChart)
if index != None:
AirCraftOperation.g_currentAIP = AirCraftOperation.g_projectList.ProjectsList[
index]
if (not QFile.exists(AirCraftOperation.g_currentAIP.Path)):
QMessageBox.warning(self, "Warning", "Invalid AIPChart!")
return
index = AirCraftOperation.g_projectList.GetIndexOfWsOrProcedure(
enumProjectType.ptFile, self.comboProject.SelectedItem,
self.comboSubproject.SelectedItem,
self.comboWorkspace.SelectedItem, self.comboProcedure.SelectedItem)
if index != None:
AirCraftOperation.g_currentProcedure = AirCraftOperation.g_projectList.ProjectsList[
index]
else:
QMessageBox.warning(
self, "Warning",
"Invalid Procedure!\nPlease create or modify a procedure!")
self.reject()
# IWorkspaceFactory ipWSF = new ShapefileWorkspaceFactoryClass()
# IWorkspace ipWS = ipWSF.OpenFromFile(AirCraftOperation.g_currentProcedure.Path, 0)
# if (ipWS == null)
# {
# throw new Exception("Failed in opening the procedure path!")
# }
index = AirCraftOperation.g_projectList.Find(
self.comboProject.SelectedItem, enumProjectType.ptProject)
if index != None:
AirCraftOperation.g_currentProject = AirCraftOperation.g_projectList.ProjectsList[
index]
else:
QMessageBox.warning(
self, "Warning",
"Invalid Project!\nPlease create or modify a project!")
self.reject()
index = AirCraftOperation.g_projectList.GetIndexOfWsOrProcedure(
enumProjectType.ptSubProject, self.comboProject.SelectedItem,
self.comboSubproject.SelectedItem)
if index != None:
AirCraftOperation.g_currentSubproject = AirCraftOperation.g_projectList.ProjectsList[
index]
else:
QMessageBox.warning(
self, "Warning",
"Invalid Sub-Project!\nPlease create or modify a sub-project!")
self.reject()
index = AirCraftOperation.g_projectList.GetIndexOfWsOrProcedure(
enumProjectType.ptWorkspace, self.comboProject.SelectedItem,
self.comboSubproject.SelectedItem,
self.comboWorkspace.SelectedItem)
if index != None:
AirCraftOperation.g_currentWorkspace = AirCraftOperation.g_projectList.ProjectsList[
index]
else:
QMessageBox.warning(
self, "Warning",
"Invalid Workspace!\nPlease create or modify a Workspace!")
self.reject()
self.accept()
def comboProject_SelectedIndexChanged(self):
listSubprojects = AirCraftOperation.g_projectList.GetLinkedProjects(
self.comboProject.SelectedItem, enumProjectType.ptProject,
enumProjectType.ptSubProject)
self.comboSubproject.Clear()
if (listSubprojects != None and len(listSubprojects) > 0):
self.comboSubproject.Items = listSubprojects
self.comboSubproject.SelectedIndex = 0
def comboSubproject_SelectedIndexChanged(self):
listWorkspace = AirCraftOperation.g_projectList.GetLinkedProjects(
self.comboSubproject.SelectedItem, enumProjectType.ptSubProject,
enumProjectType.ptWorkspace)
self.comboWorkspace.Clear()
if (listWorkspace != None and len(listWorkspace) > 0):
self.comboWorkspace.Items = listWorkspace
self.comboWorkspace.SelectedIndex = 0
def comboWorkspace_SelectedIndexChanged(self):
listProcedures = AirCraftOperation.g_projectList.GetLinkedProjects(
self.comboWorkspace.SelectedItem, enumProjectType.ptWorkspace,
enumProjectType.ptFile)
self.comboProcedure.Clear()
if (listProcedures != None and len(listProcedures) > 0):
self.comboProcedure.Items = listProcedures
self.comboProcedure.SelectedIndex = 0
class DlgAixmProcLegs(QDialog):
def __init__(self, parent = None):
QDialog.__init__(self, parent)
self.resize(290, 136);
self.setWindowTitle("Procedure Legs (AIXM 4.5)")
sizePolicy = QSizePolicy(QSizePolicy.Fixed, QSizePolicy.Fixed);
sizePolicy.setHorizontalStretch(0);
sizePolicy.setVerticalStretch(0);
sizePolicy.setHeightForWidth(self.sizePolicy().hasHeightForWidth());
self.setSizePolicy(sizePolicy);
verticalLayoutDlg = QVBoxLayout(self)
verticalLayoutDlg.setObjectName(("verticalLayoutDlg"));
self.gbAll = GroupBox(self, "HL")
self.gbAll.Caption = "Legs"
verticalLayoutDlg.addWidget(self.gbAll)
self.trvLegs = QTreeView(self.gbAll)
self.trvLegsStdModel = StandardItemModel()
self.trvLegs.setModel(self.trvLegsStdModel)
self.gbAll.Add = self.trvLegs
self.flowLayoutPanel1 = Frame(self.gbAll)
self.gbAll.Add = self.flowLayoutPanel1
self.btnAdd = QPushButton(self.flowLayoutPanel1)
icon = QIcon()
icon.addPixmap(QPixmap("Resource/add.png"), QIcon.Normal, QIcon.Off)
self.btnAdd.setIcon(icon)
self.flowLayoutPanel1.Add = self.btnAdd
self.btnRemove = QPushButton(self.flowLayoutPanel1)
icon = QIcon()
icon.addPixmap(QPixmap("Resource/remove.png"), QIcon.Normal, QIcon.Off)
self.btnRemove.setIcon(icon)
self.flowLayoutPanel1.Add = self.btnRemove
self.btnMoveUp = QPushButton(self.flowLayoutPanel1)
icon = QIcon()
icon.addPixmap(QPixmap("Resource/up.png"), QIcon.Normal, QIcon.Off)
self.btnMoveUp.setIcon(icon)
self.flowLayoutPanel1.Add = self.btnMoveUp
self.btnMoveDown = QPushButton(self.flowLayoutPanel1)
icon = QIcon()
icon.addPixmap(QPixmap("Resource/down.png"), QIcon.Normal, QIcon.Off)
self.btnMoveDown.setIcon(icon)
self.flowLayoutPanel1.Add = self.btnMoveDown
self.scrollBox = Frame(self.gbAll)
self.gbAll.Add = self.scrollBox
self.gbFix = GroupBox(self.scrollBox)
self.gbFix.Caption = "Fix"
self.scrollBox.Add = self.gbFix
self.cmbFixPos = ComboBoxPanel(self.gbFix)
self.cmbFixPos.Caption = "Position"
self.cmbFixPos.Button = "coordinate_capture.png"
self.gbFix.Add = self.cmbFixPos
self.pnlCodeRoleFix = ComboBoxPanel(self.gbFix)
self.pnlCodeRoleFix.Caption = "Type"
self.gbFix.Add = self.pnlCodeRoleFix
self.gbAttributes = GroupBox(self.scrollBox)
self.gbAttributes.Caption = "Attributes"
self.scrollBox.Add = self.gbAttributes
self.cmbRecommendedEnt = ComboBoxPanel(self.gbAttributes)
self.cmbRecommendedEnt.Caption = "Recommended Navigational Aid"
self.gbAttributes.Add = self.cmbRecommendedEnt
self.pnlCodePhase = ComboBoxPanel(self.gbAttributes)
self.pnlCodePhase.Caption = "Fligh Phase"
self.gbAttributes.Add = self.pnlCodePhase
self.pnlCodeType = ComboBoxPanel(self.gbAttributes)
self.pnlCodeType.Caption = "Leg Type"
self.gbAttributes.Add = self.pnlCodeType
self.pnlLegVOR = Frame(self.gbAttributes, "HL")
self.gbAttributes.Add = self.pnlLegVOR
self.cmbCodeTypeCourse = ComboBoxPanel(self.pnlLegVOR)
self.cmbCodeTypeCourse.Caption = "Course Angle (" + define._degreeStr + ")"
self.pnlLegVOR.Add = self.cmbCodeTypeCourse
self.txtValCourse = TrackRadialBoxPanel(self.pnlLegVOR)
self.txtValCourse.LabelWidth = 0
self.pnlLegVOR.Add = self.txtValCourse
self.pnlCodeDirTurn = ComboBoxPanel(self.gbAttributes)
self.pnlCodeDirTurn.Caption = "Turn Direction"
self.gbAttributes.Add = self.pnlCodeDirTurn
self.pnlTurnValid = ComboBoxPanel(self.gbAttributes)
self.pnlTurnValid.Caption = "Fly-By"
self.gbAttributes.Add = self.pnlTurnValid
self.cmbCenter = ComboBoxPanel(self.gbAttributes)
self.cmbCenter.Caption = "Center"
self.cmbCenter.Button = "coordinate_capture.png"
self.gbAttributes.Add = self.cmbCenter
self.pnlValBankAngle = NumberBoxPanel(self.gbAttributes)
self.pnlValBankAngle.Caption = "Bank Angle (" + define._degreeStr + ")"
self.gbAttributes.Add = self.pnlValBankAngle
self.pnlCodeDescrDistVer = ComboBoxPanel(self.gbAttributes)
self.pnlCodeDescrDistVer.Caption = "Altitude Interpretation"
self.gbAttributes.Add = self.pnlCodeDescrDistVer
self.pnlVerDistLower = Frame(self.gbAttributes, "HL")
self.gbAttributes.Add = self.pnlVerDistLower
self.cmbDistVerLower = ComboBoxPanel(self.pnlVerDistLower)
self.cmbDistVerLower.CaptionUnits = "ft"
self.cmbDistVerLower.Caption = "Lower Altitude Limit"
self.pnlVerDistLower.Add = self.cmbDistVerLower
self.txtDistVerLower = AltitudeBoxPanel(self.pnlVerDistLower)
self.txtDistVerLower.CaptionUnits = "ft"
self.txtDistVerLower.LabelWidth = 0
self.pnlVerDistLower.Add = self.txtDistVerLower
self.pnlDistVerUpper = Frame(self.gbAttributes, "HL")
self.gbAttributes.Add = self.pnlDistVerUpper
self.cmbDistVerUpper = ComboBoxPanel(self.pnlDistVerUpper)
self.cmbDistVerUpper.CaptionUnits = "ft"
self.cmbDistVerUpper.Caption = "Upper Altitude Limit"
self.pnlDistVerUpper.Add = self.cmbDistVerUpper
self.txtDistVerUpper = AltitudeBoxPanel(self.pnlDistVerUpper)
self.txtDistVerUpper.CaptionUnits = "ft"
self.txtDistVerUpper.LabelWidth = 0
self.pnlDistVerUpper.Add = self.txtDistVerUpper
self.pnlValVerAngle = NumberBoxPanel(self.gbAttributes)
self.pnlValVerAngle.Caption = "Climb / Descent Angle [+/-] (" + define._degreeStr + ")"
self.gbAttributes.Add = self.pnlValVerAngle
self.tableLayoutPanel2 = Frame(self.gbAttributes, "HL")
self.gbAttributes.Add = self.tableLayoutPanel2
self.cmbCodeSpeedRef = ComboBoxPanel(self.tableLayoutPanel2)
self.cmbCodeSpeedRef.CaptionUnits = "kts"
self.cmbCodeSpeedRef.Caption = "Speed Restriction"
self.tableLayoutPanel2.Add = self.cmbCodeSpeedRef
self.txtValSpeed = SpeedBoxPanel(self.tableLayoutPanel2)
self.txtValSpeed.LabelWidth = 0
self.tableLayoutPanel2.Add = self.txtValSpeed
self.pnlValDist = DistanceBoxPanel(self.gbAttributes, DistanceUnits.NM)
self.pnlValDist.Caption = "Segment Length"
self.pnlValDist.Button = None
self.gbAttributes.Add = self.pnlValDist
self.pnlValDur = NumberBoxPanel(self.gbAttributes)
self.pnlValDur.CaptionUnits = "min"
self.pnlValDur.Caption = "Duration"
self.gbAttributes.Add = self.pnlValDur
self.pnlCodeRepAtc = ComboBoxPanel(self.gbAttributes)
self.pnlCodeRepAtc.Caption = "ATC Reporting"
self.gbAttributes.Add = self.pnlCodeRepAtc
self.pnlValTheta = TrackRadialBoxPanel(self.gbAttributes)
self.pnlValTheta.Caption = "Magnetic Bearing / Radial from Recommended Nav. Aid"
self.pnlValTheta.LabelWidth = 350
self.gbAttributes.Add = self.pnlValTheta
self.pnlValRho = DistanceBoxPanel(self.gbAttributes, DistanceUnits.NM)
self.pnlValRho.Caption = "Distance from Recommended Nav. Aid"
self.pnlValRho.LabelWidth = 350
self.gbAttributes.Add = self.pnlValRho
self.txtRemarks = TextBoxPanel(self.gbAttributes, True)
self.txtRemarks.Caption = "Remarks"
self.gbAttributes.Add = self.txtRemarks
self.btnBoxOkCancel = QDialogButtonBox(self)
self.btnBoxOkCancel.setObjectName(("btnBoxOkCancel"));
self.btnBoxOkCancel.setStandardButtons(QDialogButtonBox.Cancel|QDialogButtonBox.Ok);
self.connect(self.btnBoxOkCancel, SIGNAL("accepted()"), self.acceptDlg)
self.connect(self.btnBoxOkCancel, SIGNAL("rejected()"), self.reject)
verticalLayoutDlg.addWidget(self.btnBoxOkCancel)
self.trvLegs.pressed.connect(self.trvLegs_pressed)
self.data = None
self.legs = None
self.aerodrome = None;
self.magnVar = 0.0
for value in CodeIapFixAixm.Items:
self.pnlCodeRoleFix.Add(value);
for codeTypeProcPathAixm in CodeTypeProcPathAixm.Items:
self.pnlCodeType.Add(codeTypeProcPathAixm);
for codePhaseProcAixm in CodePhaseProcAixm.Items:
self.pnlCodePhase.Add(codePhaseProcAixm);
for codeTypeCourseAixm in CodeTypeCourseAixm.Items:
self.cmbCodeTypeCourse.Add(codeTypeCourseAixm);
for codeDirTurnAixm in CodeDirTurnAixm.Items:
self.pnlCodeDirTurn.Add(codeDirTurnAixm);
for codeDescrDistVerAixm in CodeDescrDistVerAixm.Items:
self.pnlCodeDescrDistVer.Add(codeDescrDistVerAixm);
for codeDistVerAixm in CodeDistVerAixm.Items:
self.cmbDistVerLower.Add(codeDistVerAixm);
for value1 in CodeDistVerAixm.Items:
self.cmbDistVerUpper.Add(value1);
for codeSpeedRefAixm in CodeSpeedRefAixm.Items:
self.cmbCodeSpeedRef.Add(codeSpeedRefAixm);
for codeTypeFlyByAixm in CodeTypeFlyByAixm.Items:
self.pnlTurnValid.Add(codeTypeFlyByAixm);
for codeRepAtcAixm in CodeRepAtcAixm.Items:
self.pnlCodeRepAtc.Add(codeRepAtcAixm);
self.method_6()
self.connect(self.pnlValRho, SIGNAL("Event_0"), self.pnlValRho_Event_0)
self.connect(self.pnlValTheta, SIGNAL("Event_0"), self.pnlValTheta_Event_0)
self.connect(self.pnlCodeRepAtc, SIGNAL("Event_0"), self.pnlCodeRepAtc_Event_0)
self.connect(self.pnlValDur, SIGNAL("Event_0"), self.pnlValDur_Event_0)
self.connect(self.pnlValDist, SIGNAL("Event_0"), self.pnlValDist_Event_0)
self.connect(self.cmbCodeSpeedRef, SIGNAL("Event_0"), self.cmbCodeSpeedRef_Event_0)
self.connect(self.txtValSpeed, SIGNAL("Event_0"), self.txtValSpeed_Event_0)
self.connect(self.txtDistVerUpper, SIGNAL("Event_0"), self.txtDistVerUpper_Event_0)
self.connect(self.cmbDistVerUpper, SIGNAL("Event_0"), self.cmbDistVerUpper_Event_0)
self.connect(self.txtDistVerLower, SIGNAL("Event_0"), self.txtDistVerLower_Event_0)
self.connect(self.cmbDistVerLower, SIGNAL("Event_0"), self.cmbDistVerLower_Event_0)
self.connect(self.pnlValBankAngle, SIGNAL("Event_0"), self.pnlValBankAngle_Event_0)
self.connect(self.cmbCenter, SIGNAL("Event_0"), self.cmbCenter_Event_0)
self.connect(self.pnlTurnValid, SIGNAL("Event_0"), self.pnlTurnValid_Event_0)
self.connect(self.pnlCodeDirTurn, SIGNAL("Event_0"), self.pnlCodeDirTurn_Event_0)
self.connect(self.cmbCodeTypeCourse, SIGNAL("Event_0"), self.cmbCodeTypeCourse_Event_0)
self.connect(self.txtValCourse, SIGNAL("Event_0"), self.txtValCourse_Event_0)
self.connect(self.pnlCodeType, SIGNAL("Event_0"), self.pnlCodeType_Event_0)
self.connect(self.pnlCodePhase, SIGNAL("Event_0"), self.pnlCodePhase_Event_0)
self.connect(self.pnlCodeRoleFix, SIGNAL("Event_0"), self.pnlCodeRoleFix_Event_0)
self.connect(self.txtRemarks, SIGNAL("Event_0"), self.txtRemarks_Event_0)
self.connect(self.cmbRecommendedEnt, SIGNAL("Event_0"), self.cmbRecommendedEnt_Event_0)
self.connect(self.cmbFixPos, SIGNAL("Event_0"), self.cmbFixPos_Event_0)
self.connect(self.cmbCenter, SIGNAL("Event_3"), self.method_14)
self.connect(self.cmbFixPos, SIGNAL("Event_3"), self.method_13)
self.btnAdd.clicked.connect(self.btnAdd_Click)
self.btnMoveDown.clicked.connect(self.btnMoveDown_Click)
self.btnMoveUp.clicked.connect(self.btnMoveUp_Click)
self.btnRemove.clicked.connect(self.btnRemove_Click)
self.trvLegs.setHeaderHidden(True)
if self.trvLegsStdModel.rowCount() > 0:
self.trvLegs.setCurrentIndex(self.trvLegsStdModel.index(0,0))
self.method_8()
# rootModelIndex = self.trvLegs.rootIndex()
# rootItem = self.trvLegsStdModel.itemFromIndex(rootModelIndex)
# rootItem.setText("Legs")
def btnAdd_Click(self):
if (len(self.trvLegs.selectedIndexes()) == 0 and not self.method_5()):
return;
listInsertPosition = ListInsertPosition.Append;
resultDlg, listInsertPosition = DlgAixmInsertLeg.smethod_0(listInsertPosition)
if (self.trvLegsStdModel.rowCount() > 0 and not resultDlg):
return;
count = self.trvLegsStdModel.rowCount()
if (listInsertPosition == ListInsertPosition.Before):
count = self.trvLegs.selectedIndexes()[0].row();
elif (listInsertPosition == ListInsertPosition.After):
count = self.trvLegs.selectedIndexes()[0].row() + 1;
self.trvLegsStdModel.setItem(self.trvLegsStdModel.rowCount(), QStandardItem(str(self.trvLegsStdModel.rowCount() + 1)));
self.legs.insert(count, DataBaseProcedureLeg());
self.trvLegs.setCurrentIndex(self.trvLegsStdModel.index(count, 0))
self.trvLegs_pressed()
def btnMoveDown_Click(self):
if (len(self.trvLegs.selectedIndexes()) == 0):
return;
index = self.trvLegs.selectedIndexes()[0].row();
item = self.legs[index];
self.legs.pop(index);
self.legs.insert(index + 1, item);
self.trvLegs.setCurrentIndex(self.trvLegsStdModel.index(index + 1, 0))
self.trvLegs_pressed()
def btnMoveUp_Click(self):
if (len(self.trvLegs.selectedIndexes()) == 0):
return;
index = self.trvLegs.selectedIndexes()[0].row();
item = self.legs[index];
self.legs.pop(index);
self.legs.insert(index - 1, item);
self.trvLegs.setCurrentIndex(self.trvLegsStdModel.index(index - 1, 0))
self.trvLegs_pressed()
def btnRemove_Click(self):
item = None;
if (len(self.trvLegs.selectedIndexes()) == 0):
return;
if (QMessageBox.question(self, "Question", "Are you sure you want to delete the selected procedure leg?", QMessageBox.Yes | QMessageBox.No) == QMessageBox.Yes):
index = self.trvLegs.selectedIndexes()[0].row();
self.legs.pop(index);
self.trvLegsStdModel.takeRow(self.trvLegsStdModel.rowCount() - 1);
if (index >= self.trvLegsStdModel.rowCount() - 1):
index -= 1;
# treeView = self.trvLegs;
# if (index >= 0):
if self.trvLegsStdModel.rowCount() > 0 and index < 0:
index = 0
self.trvLegs.setCurrentIndex(self.trvLegsStdModel.index(index, 0))
self.trvLegs_pressed()
def cmbRecommendedEnt_Event_0(self):
self.method_10(self.cmbRecommendedEnt)
def txtRemarks_Event_0(self):
self.method_10(self.txtRemarks)
def cmbFixPos_Event_0(self):
self.method_10(self.cmbFixPos)
def cmbDistVerLower_Event_0(self):
self.method_10(self.cmbDistVerLower)
def pnlValBankAngle_Event_0(self):
self.method_10(self.pnlValBankAngle)
def cmbCenter_Event_0(self):
self.method_10(self.cmbCenter)
def pnlTurnValid_Event_0(self):
self.method_10(self.pnlTurnValid)
def pnlCodeDirTurn_Event_0(self):
self.method_10(self.pnlCodeDirTurn)
def cmbCodeTypeCourse_Event_0(self):
self.method_10(self.cmbCodeTypeCourse)
def txtValCourse_Event_0(self):
self.method_10(self.txtValCourse)
def pnlCodeType_Event_0(self):
self.method_10(self.pnlCodeType)
def pnlCodePhase_Event_0(self):
self.method_10(self.pnlCodePhase)
def pnlCodeRoleFix_Event_0(self):
self.method_10(self.pnlCodeRoleFix)
def txtDistVerLower_Event_0(self):
self.method_10(self.txtDistVerLower)
def cmbDistVerUpper_Event_0(self):
self.method_10(self.cmbDistVerUpper)
def txtDistVerUpper_Event_0(self):
self.method_10(self.txtDistVerUpper)
def txtValSpeed_Event_0(self):
self.method_10(self.txtValSpeed)
def cmbCodeSpeedRef_Event_0(self):
self.method_10(self.cmbCodeSpeedRef)
def pnlValDist_Event_0(self):
self.method_10(self.pnlValDist)
def pnlValDur_Event_0(self):
self.method_10(self.pnlValDur)
def pnlCodeRepAtc_Event_0(self):
self.method_10(self.pnlCodeRepAtc)
def pnlValTheta_Event_0(self):
self.method_10(self.pnlValTheta)
def pnlValRho_Event_0(self):
self.method_10(self.pnlValRho)
def trvLegs_pressed(self):
self.method_6()
self.method_8()
def acceptDlg(self):
self.legs.refresh()
QObject.emit(self, SIGNAL("DlgAixmProcLegs_Smethod_0_Event"), self.legs, self.data)
self.accept()
def method_5(self):
pass
def method_6(self):
self.btnOK = self.btnBoxOkCancel.button(QDialogButtonBox.Ok)
self.btnOK.setEnabled(len(self.trvLegs.selectedIndexes()) > 0)
self.btnRemove.setEnabled(len(self.trvLegs.selectedIndexes()) > 0);
self.btnMoveUp.setEnabled((len(self.trvLegs.selectedIndexes()) > 0 and self.trvLegs.selectedIndexes()[0].row() != 0) and True or False);
self.btnMoveDown.setEnabled((len(self.trvLegs.selectedIndexes()) <= 0 or self.trvLegsStdModel.rowCount() <= 0) and False or ((len(self.trvLegs.selectedIndexes()) > 0) and self.trvLegs.selectedIndexes()[0].row() < self.trvLegsStdModel.rowCount() - 1));
def method_7(self):
for i in range(self.legs.Count):
num = i + 1;
self.trvLegsStdModel.setItem(i, QStandardItem(str(num)));
self.method_6()
# if (self.trvLegsStdModel.rowCount() > 0):
# self.trvLegs.setCurrentIndex() = self.trvLegs.Nodes[0];
def method_8(self):
if (len(self.trvLegs.selectedIndexes()) <= 0):
self.scrollBox.Enabled = False;
self.cmbFixPos.SelectedIndex = -1;
self.pnlCodeRoleFix.SelectedIndex = -1;
self.cmbRecommendedEnt.SelectedIndex = -1;
self.pnlCodePhase.SelectedIndex = -1;
self.pnlCodeType.SelectedIndex = -1;
self.cmbCodeTypeCourse.SelectedIndex = -1;
self.txtValCourse.Value = 0;
self.pnlCodeDirTurn.SelectedIndex = -1;
self.cmbCenter.SelectedIndex = -1;
self.pnlTurnValid.SelectedIndex = -1;
self.pnlValBankAngle.Value = 0;
self.pnlCodeDescrDistVer.SelectedIndex = -1;
self.cmbDistVerLower.SelectedIndex = -1;
self.txtDistVerLower.Value = None;
self.cmbDistVerUpper.SelectedIndex = -1;
self.txtDistVerUpper.Value = None;
self.pnlValVerAngle.Value = None;
self.cmbCodeSpeedRef.SelectedIndex = -1;
self.txtValSpeed.Value = None;
self.pnlValDist.Value = None;
self.pnlValDur.Value = 0;
self.pnlCodeRepAtc.SelectedIndex = -1;
self.pnlValTheta.Value = 0;
self.pnlValRho.Value = None;
self.txtRemarks.Value = ""
return;
self.scrollBox.Enabled = True;
item = self.legs[self.trvLegs.selectedIndexes()[0].row()];
if (item.PointEnt == None):
self.cmbFixPos.SelectedIndex = -1;
else:
self.cmbFixPos.SelectedIndex = self.cmbFixPos.IndexOf(item.PointEnt);
self.pnlCodeRoleFix.SelectedIndex = self.method_9(self.pnlCodeRoleFix.Items, item.CodeRoleFix);
if (item.RecommendedEnt == None):
self.cmbRecommendedEnt.SelectedIndex = -1;
else:
self.cmbRecommendedEnt.SelectedIndex = self.cmbRecommendedEnt.IndexOf(item.RecommendedEnt);
self.pnlCodePhase.SelectedIndex = self.method_9(self.pnlCodePhase.Items, item.CodePhase);
self.pnlCodeType.SelectedIndex = self.method_9(self.pnlCodeType.Items, item.CodeType);
self.cmbCodeTypeCourse.SelectedIndex = self.method_9(self.cmbCodeTypeCourse.Items, item.CodeTypeCourse);
self.txtValCourse.Value = item.ValCourse;
self.pnlCodeDirTurn.SelectedIndex = self.method_9(self.pnlCodeDirTurn.Items, item.CodeDirTurn);
if (item.CenterEnt == None):
self.cmbCenter.SelectedIndex = -1;
else:
self.cmbCenter.SelectedIndex = self.cmbCenter.IndexOf(item.CenterEnt);
self.pnlTurnValid.SelectedIndex = self.method_9(self.pnlTurnValid.Items, item.CodeTurnValid)
self.pnlValBankAngle.Value = item.ValBankAngle;
self.pnlCodeDescrDistVer.SelectedIndex = self.method_9(self.pnlCodeDescrDistVer.Items, item.CodeDescrDistVer)
self.cmbDistVerLower.SelectedIndex = self.method_9(self.cmbDistVerLower.Items, item.CodeDistVerLower)
self.txtDistVerLower.Value = item.ValDistVerLower;
self.cmbDistVerUpper.SelectedIndex = self.method_9(self.cmbDistVerUpper.Items, item.CodeDistVerUpper)
self.txtDistVerUpper.Value = item.ValDistVerUpper;
self.pnlValVerAngle.Value = item.ValVerAngle;
self.cmbCodeSpeedRef.SelectedIndex = self.method_9(self.cmbCodeSpeedRef.Items, item.CodeSpeedRef)
self.txtValSpeed.Value = item.ValSpeedLimit;
self.pnlValDist.Value = item.ValDist;
self.pnlValDur.Value = item.ValDur;
self.pnlCodeRepAtc.SelectedIndex = self.method_9(self.pnlCodeRepAtc.Items, item.CodeRepAtc)
self.pnlValTheta.Value = item.ValTheta;
self.pnlValRho.Value = item.ValRho;
self.txtRemarks.Value = item.TxtRmk;
self.method_6()
def method_9(self, ilist_0, string_0):
for i in range(len(ilist_0)):
if (ilist_0[i] == string_0):
return i;
return -1;
def method_10(self, sender):
if (len(self.trvLegs.selectedIndexes()) == 0):
return;
item = self.legs[self.trvLegs.selectedIndexes()[0].row()];
if (sender == self.cmbFixPos):
item.PointEnt = self.cmbFixPos.SelectedItem;
if (sender == self.pnlCodeRoleFix):
item.CodeRoleFix = self.pnlCodeRoleFix.SelectedItem;
if (sender == self.cmbRecommendedEnt):
item.RecommendedEnt = self.cmbRecommendedEnt.SelectedItem
if (sender == self.pnlCodePhase):
item.CodePhase = self.pnlCodePhase.SelectedItem
if (sender == self.pnlCodeType):
item.CodeType = self.pnlCodeType.SelectedItem
if (sender == self.cmbCodeTypeCourse):
item.CodeTypeCourse = self.cmbCodeTypeCourse.SelectedItem
if (sender == self.txtValCourse):
item.ValCourse = self.txtValCourse.Value;
if (sender == self.pnlCodeDirTurn):
item.CodeDirTurn = self.pnlCodeDirTurn.SelectedItem
if (sender == self.cmbCenter):
item.CenterEnt = self.cmbCenter.SelectedItem;
return;
if (sender == self.pnlTurnValid):
item.CodeTurnValid = self.pnlTurnValid.SelectedItem
return;
if (sender == self.pnlValBankAngle):
item.ValBankAngle = self.pnlValBankAngle.Value;
return;
if (sender == self.pnlCodeDescrDistVer):
item.CodeDescrDistVer = self.pnlTurnValid.SelectedItem
return;
if (sender == self.cmbDistVerLower):
item.CodeDistVerLower = self.cmbDistVerLower.SelectedItem
return;
if (sender == self.txtDistVerLower):
item.ValDistVerLower = self.txtDistVerLower.Value;
return;
if (sender == self.cmbDistVerUpper):
item.CodeDistVerUpper = self.cmbDistVerUpper.SelectedItem
return;
if (sender == self.txtDistVerUpper):
item.ValDistVerUpper = self.txtDistVerUpper.Value;
return;
if (sender == self.pnlValVerAngle):
item.ValVerAngle = self.pnlValVerAngle.Value;
return;
if (sender == self.cmbCodeSpeedRef):
item.CodeSpeedRef = self.cmbCodeSpeedRef.SelectedItem
return;
if (sender == self.txtValSpeed):
item.ValSpeedLimit = self.txtValSpeed.Value;
return;
if (sender == self.pnlValDist):
item.ValDist = self.pnlValDist.Value;
return;
if (sender == self.pnlValDur):
item.ValDur = self.pnlValDur.Value;
return;
if (sender == self.pnlCodeRepAtc):
item.CodeRepAtc = self.pnlCodeRepAtc.SelectedItem
return;
if (sender == self.pnlValTheta):
item.ValTheta = self.pnlValTheta.Value;
return;
if (sender == self.pnlValRho):
item.ValRho = self.pnlValRho.Value;
return;
if (sender == self.txtRemarks):
item.TxtRmk = self.txtRemarks.Value;
def method_13(self):
point3d = None;
procEntityBase = None;
selectTool = DlgAixmSelectPosition.smethod_0(self.data, point3d, ProcEntityListType.Fixes)
QObject.connect(selectTool, SIGNAL("DlgAixmSelectPosition_Smethod_0_Event"), self.method_13_Event)
def method_13_Event(self, flag, procEntityBase):
# flag, procEntityBase = DlgAixmSelectPosition.smethod_0(self.data, point3d, ProcEntityListType.Fixes)
if (flag and procEntityBase != None):
if (not self.cmbFixPos.Contains(procEntityBase)):
self.cmbFixPos.Add(procEntityBase);
self.cmbFixPos.SelectedIndex = self.cmbFixPos.IndexOf(procEntityBase);
self.method_10(self.cmbFixPos);
def method_14(self):
point3d = None;
procEntityBase = None;
selectTool = DlgAixmSelectPosition.smethod_0(self.data, point3d, ProcEntityListType.Centers)
QObject.connect(selectTool, SIGNAL("DlgAixmSelectPosition_Smethod_0_Event"), self.method_14_Event)
def method_14_Event(self, flag, procEntityBase):
# flag, procEntityBase = DlgAixmSelectPosition.smethod_0(self.data, point3d, ProcEntityListType.Centers)
if (flag and procEntityBase != None):
if (not self.cmbCenter.Contains(procEntityBase)):
self.cmbCenter.Add(procEntityBase);
self.cmbCenter.SelectedIndex = self.cmbCenter.IndexOf(procEntityBase);
self.method_10(self.cmbCenter);
@staticmethod
def smethod_0(parent, dataBaseProcedureLegs_0, dataBaseProcedureData_0, procEntityAHP_0):
flag = False
dlgAixmProcLeg = DlgAixmProcLegs(parent)
dlgAixmProcLeg.legs = dataBaseProcedureLegs_0;
dlgAixmProcLeg.data = dataBaseProcedureData_0;
if (procEntityAHP_0 != None):
dlgAixmProcLeg.aerodrome = procEntityAHP_0;
dlgAixmProcLeg.magnVar = procEntityAHP_0.ValMagVar;
dataBaseProcedureData_0.method_59(dlgAixmProcLeg.cmbFixPos, ProcEntityListType.Fixes);
dataBaseProcedureData_0.method_59(dlgAixmProcLeg.cmbCenter, ProcEntityListType.Centers);
dataBaseProcedureData_0.method_59(dlgAixmProcLeg.cmbRecommendedEnt, ProcEntityListType.RecommendedNavAids);
if (dlgAixmProcLeg.legs.Count == 0):
dlgAixmProcLeg.legs.Add(DataBaseProcedureLeg());
dlgAixmProcLeg.method_7()
if dlgAixmProcLeg.trvLegsStdModel.rowCount() > 0:
dlgAixmProcLeg.trvLegs.setCurrentIndex(dlgAixmProcLeg.trvLegsStdModel.index(0,0))
dlgAixmProcLeg.method_6()
dlgAixmProcLeg.method_8();
dlgAixmProcLeg.show()
return dlgAixmProcLeg
class ProcedureMngForm(QDialog):
def __init__(self, parent=None):
QDialog.__init__(self)
self.setObjectName(("ui_ProcedureMngForm"))
self.resize(200, 200)
font = QFont()
font.setFamily(("Arial"))
font.setBold(False)
font.setWeight(50)
self.setFont(font)
self.vlForm = QVBoxLayout(self)
self.vlForm.setObjectName(("vl_ProceduretMngForm"))
self.vlForm.setSpacing(9)
self.vlForm.setMargin(9)
self.basicFrame = Frame(self)
self.vlForm.addWidget(self.basicFrame)
self.frameName = Frame(self.basicFrame, "HL")
self.basicFrame.Add = self.frameName
self.frame = Frame(self.frameName)
self.frameName.Add = self.frame
self.comboProjectProcedure = ComboBoxPanel(self.frame)
self.comboProjectProcedure.Caption = "Project"
self.comboProjectProcedure.LabelWidth = 120
self.frame.Add = self.comboProjectProcedure
self.comboSubProjectProcedure = ComboBoxPanel(self.frame)
self.comboSubProjectProcedure.Caption = "Sub-Project"
self.comboSubProjectProcedure.LabelWidth = 120
self.frame.Add = self.comboSubProjectProcedure
self.comboWorkspaceProcedure = ComboBoxPanel(self.frame)
self.comboWorkspaceProcedure.Caption = "Workspace"
self.comboWorkspaceProcedure.LabelWidth = 120
self.frame.Add = self.comboWorkspaceProcedure
self.textNameProcedure = TextBoxPanel(self.frame)
self.textNameProcedure.Caption = "Procedure Name"
self.textNameProcedure.LabelWidth = 120
self.textNameProcedure.Width = 120
self.frame.Add = self.textNameProcedure
self.groubox = GroupBox(self.frameName)
self.groubox.Caption = "Procedures"
self.frameName.Add = self.groubox
self.listBoxProcedure = ListBox(self.groubox)
self.groubox.Add = self.listBoxProcedure
self.textPathProcedure = TextBoxPanel(self.basicFrame)
self.textPathProcedure.Caption = "Procedure Path"
self.textPathProcedure.imageButton.setIcon(QIcon())
self.textPathProcedure.Button = "opens.png"
self.textPathProcedure.LabelWidth = 120
self.textPathProcedure.textBox.setMaximumWidth(10000)
self.textPathProcedure.textBox.setMinimumWidth(100)
self.basicFrame.Add = self.textPathProcedure
self.btnFrame = Frame(self.basicFrame, "HL")
self.basicFrame.Add = self.btnFrame
self.buttonAddProcedure = QPushButton(self.btnFrame)
self.buttonAddProcedure.setObjectName("buttonAddProcedure")
self.buttonAddProcedure.setText("Add")
self.btnFrame.Add = self.buttonAddProcedure
self.buttonModifyProcedure = QPushButton(self.btnFrame)
self.buttonModifyProcedure.setObjectName("buttonModifyProcedure")
self.buttonModifyProcedure.setText("Modify")
self.btnFrame.Add = self.buttonModifyProcedure
self.buttonDeleteProcedure = QPushButton(self.btnFrame)
self.buttonDeleteProcedure.setObjectName("buttonDeleteProcedure")
self.buttonDeleteProcedure.setText("Delete")
self.btnFrame.Add = self.buttonDeleteProcedure
self.buttonSaveProcedure = QPushButton(self.btnFrame)
self.buttonSaveProcedure.setObjectName("buttonSaveProcedure")
self.buttonSaveProcedure.setText("Save")
self.btnFrame.Add = self.buttonSaveProcedure
self.buttonCloseProcedure = QPushButton(self.btnFrame)
self.buttonCloseProcedure.setObjectName("buttonCloseProcedure")
self.buttonCloseProcedure.setText("Close")
self.btnFrame.Add = self.buttonCloseProcedure
self.connect(self.listBoxProcedure, SIGNAL("Event_0"),
self.listBoxProcedure_SelectedIndexChanged)
self.connect(self.comboProjectProcedure, SIGNAL("Event_0"),
self.comboProjectProcedure_SelectedIndexChanged)
self.connect(self.comboSubProjectProcedure, SIGNAL("Event_0"),
self.comboSubProjectProcedure_SelectedIndexChanged)
self.connect(self.textPathProcedure, SIGNAL("Event_1"),
self.buttonBrowseWorkspace_Click)
self.buttonCloseProcedure.clicked.connect(
self.buttonCloseProcedure_Click)
self.buttonSaveProcedure.clicked.connect(
self.buttonSaveProcedure_Click)
self.buttonDeleteProcedure.clicked.connect(
self.buttonDeleteProcedure_Click)
self.buttonModifyProcedure.clicked.connect(
self.buttonModifyProcedure_Click)
self.buttonAddProcedure.clicked.connect(self.buttonAddProcedure_Click)
for pi in AirCraftOperation.g_projectList.ProjectsList:
if (pi.Pt == enumProjectType.ptFile):
self.listBoxProcedure.Add(pi.Name)
elif (pi.Pt == enumProjectType.ptProject):
self.comboProjectProcedure.Add(pi.Name)
elif (pi.Pt == enumProjectType.ptSubProject):
self.comboSubProjectProcedure.Add(pi.Name)
elif (pi.Pt == enumProjectType.ptWorkspace):
self.comboWorkspaceProcedure.Add(pi.Name)
self.comboProjectProcedure_SelectedIndexChanged()
self.comboSubProjectProcedure_SelectedIndexChanged()
def CheckInputValues(self):
if (self.textNameProcedure.Text == None
or self.textNameProcedure.Text == ""):
QMessageBox.warning(self, "Warning", "Please input project name!")
return False
if (self.textPathProcedure.Text == None
or self.textPathProcedure.Text == ""):
QMessageBox.warning(self, "Warning", "Please input project path!")
return False
if (self.comboProjectProcedure.SelectedIndex < 0):
QMessageBox.warning(self, "Warning", "Please select an Project!")
return False
if (self.comboSubProjectProcedure.SelectedIndex < 0):
QMessageBox.warning(self, "Warning",
"Please select an Sub-Project!")
return False
if (self.comboWorkspaceProcedure.SelectedIndex < 0):
QMessageBox.warning(self, "Warning", "Please select an Workspace!")
return
directory = QDir(self.textPathProcedure.Text)
if (not directory.exists()):
if (QMessageBox.question(
self, "Question",
"Procedure path dose not exist! Do you create the directory?",
QMessageBox.Yes | QMessageBox.No) == QMessageBox.Yes):
directory.mkpath(self.textPathProcedure.Text)
else:
return False
return True
# private void WorkspaceMngForm_Load(object sender, EventArgs e)
# {
# try
# {
# foreach (ProjectInfo pi in AirCraftOperation.g_projectList.ProjectsList)
# {
# if (pi.Pt == enumProjectType.ptFile)
# {
# self.listBoxProcedure.Items.Add(pi.Name)
# }
# else if (pi.Pt == enumProjectType.ptProject)
# {
# self.comboProjectProcedure.Items.Add(pi.Name)
# }
# else if (pi.Pt == enumProjectType.ptSubProject)
# {
# self.comboSubProjectProcedure.Items.Add(pi.Name)
# }
# else if (pi.Pt == enumProjectType.ptWorkspace)
# {
# self.comboWorkspaceProcedure.Items.Add(pi.Name)
# }
# }
# }
# catch (System.Exception ex)
# {
# MessageBox.Show(ex.Message)
# }
# }
def listBoxProcedure_SelectedIndexChanged(self):
if (self.listBoxProcedure.SelectedIndex < 0):
return
pi = AirCraftOperation.g_projectList.Find(
self.listBoxProcedure.Items[self.listBoxProcedure.SelectedIndex])
self.textNameProcedure.Text = AirCraftOperation.g_projectList.ProjectsList[
pi].Name
self.textPathProcedure.Text = AirCraftOperation.g_projectList.ProjectsList[
pi].Path
self.comboProjectProcedure.SelectedIndex = self.comboProjectProcedure.IndexOf(
AirCraftOperation.g_projectList.ProjectsList[pi].ProjName)
self.comboSubProjectProcedure.SelectedIndex = self.comboSubProjectProcedure.IndexOf(
AirCraftOperation.g_projectList.ProjectsList[pi].SubProjName)
self.comboWorkspaceProcedure.SelectedIndex = self.comboWorkspaceProcedure.IndexOf(
AirCraftOperation.g_projectList.ProjectsList[pi].WorkspaceName)
def buttonBrowseWorkspace_Click(self):
folderPath = QFileDialog.getExistingDirectory(self,
"Open Project Path")
if (folderPath != None and folderPath != ""):
self.textPathProcedure.Value = folderPath
def buttonSaveProcedure_Click(self):
res = QMessageBox.question(self, "Question",
"Save changes to project information?",
QMessageBox.Yes | QMessageBox.No)
if (res == QMessageBox.Yes):
AirCraftOperation.g_projectList.WriteProjectInfoXml()
self.buttonSaveProcedure.setEnabled(False)
def buttonCloseProcedure_Click(self):
# if (self.buttonSaveProcedure.isEnabled() == True):
# DialogResult res = MessageBox.Show("Save changes to project information?", "Alert", MessageBoxButtons.YesNoCancel)
# if (res == DialogResult.Yes)
# {
# self.buttonSaveWorkspace_Click(sender, e)
# }
# else if (res == DialogResult.No)
# {
# }
# else if (res == DialogResult.Cancel)
# {
# self.DialogResult = DialogResult.None
# return
# }
# }
self.accept()
def buttonAddProcedure_Click(self):
if (not self.CheckInputValues()):
return
if (AirCraftOperation.g_projectList.Find(self.textNameProcedure.Text)
!= None):
QMessageBox.warning(self, "Warning", "The same name exist!")
return
pi = ProjectInfo()
pi.Pt = enumProjectType.ptFile
pi.Name = self.textNameProcedure.Text
pi.Path = self.textPathProcedure.Text
pi.ProjName = self.comboProjectProcedure.SelectedItem
pi.SubProjName = self.comboSubProjectProcedure.SelectedItem
pi.WorkspaceName = self.comboWorkspaceProcedure.SelectedItem
pi.UserName = AirCraftOperation.g_loginedUser.Name
AirCraftOperation.g_projectList.Add(pi)
nIndex = self.listBoxProcedure.Add(pi.Name)
self.listBoxProcedure.SelectedIndex = nIndex
self.buttonSaveProcedure.setEnabled(True)
def buttonModifyProcedure_Click(self):
if (self.listBoxProcedure.SelectedIndex < 0):
QMessageBox.warning(self, "Warning",
"Please select project in the projects list!")
return
if (not self.CheckInputValues()):
return
index = AirCraftOperation.g_projectList.Find(
self.listBoxProcedure.Items[self.listBoxProcedure.SelectedIndex])
AirCraftOperation.g_projectList.ProjectsList[
index].Pt = enumProjectType.ptFile
AirCraftOperation.g_projectList.ProjectsList[
index].Name = self.textNameProcedure.Text
AirCraftOperation.g_projectList.ProjectsList[
index].Path = self.textPathProcedure.Text
AirCraftOperation.g_projectList.ProjectsList[
index].ProjName = self.comboProjectProcedure.SelectedItem
AirCraftOperation.g_projectList.ProjectsList[
index].SubProjName = self.comboSubProjectProcedure.SelectedItem
AirCraftOperation.g_projectList.ProjectsList[
index].WorkspaceName = self.comboWorkspaceProcedure.SelectedItem
AirCraftOperation.g_projectList.ProjectsList[
index].UserName = AirCraftOperation.g_loginedUser.Name
self.listBoxProcedure.Clear()
for pi in AirCraftOperation.g_projectList.ProjectsList:
if (pi.Pt == enumProjectType.ptFile):
self.listBoxProcedure.Add(pi.Name)
# AirCraftOperation.g_projectList.Remove(pi)
#
# AirCraftOperation.g_projectList.Add(pi)
self.buttonSaveProcedure.setEnabled(True)
def buttonDeleteProcedure_Click(self):
if (self.listBoxProcedure.SelectedIndex < 0):
QMessageBox.warning(self, "Warning",
"Please select project in the projects list!")
return
if (QMessageBox.question(
self, "Question",
"Are you sure to delete " + self.listBoxProcedure.Items[
self.listBoxProcedure.SelectedIndex] + "?",
QMessageBox.Yes | QMessageBox.No) == QMessageBox.No):
return
AirCraftOperation.g_projectList.Remove(
self.listBoxProcedure.Items[self.listBoxProcedure.SelectedIndex],
enumProjectType.ptFile)
self.buttonSaveProcedure.setEnabled(True)
self.listBoxProcedure.Clear()
for pi in AirCraftOperation.g_projectList.ProjectsList:
if (pi.Pt == enumProjectType.ptFile):
self.listBoxProcedure.Add(pi.Name)
def comboProjectProcedure_SelectedIndexChanged(self):
listSubprojects = AirCraftOperation.g_projectList.GetLinkedProjects(
self.comboProjectProcedure.SelectedItem, enumProjectType.ptProject,
enumProjectType.ptSubProject)
self.comboSubProjectProcedure.Clear()
if (listSubprojects != None and len(listSubprojects) > 0):
self.comboSubProjectProcedure.Items = listSubprojects
self.comboSubProjectProcedure.SelectedIndex = 0
self.comboSubProjectProcedure_SelectedIndexChanged()
def comboSubProjectProcedure_SelectedIndexChanged(self):
listWorkspace = AirCraftOperation.g_projectList.GetLinkedProjects(
self.comboSubProjectProcedure.SelectedItem,
enumProjectType.ptSubProject, enumProjectType.ptWorkspace)
self.comboWorkspaceProcedure.Clear()
if (listWorkspace != None and len(listWorkspace) > 0):
self.comboWorkspaceProcedure.Items = listWorkspace
self.comboWorkspaceProcedure.SelectedIndex = 0
class SubProjectMngForm(QDialog):
def __init__(self, parent=None):
QDialog.__init__(self, parent)
self.setObjectName("ui_SubProjectMngForm")
self.resize(200, 200)
font = QFont()
font.setFamily("Arial")
font.setBold(False)
font.setWeight(50)
self.setFont(font)
self.vlForm = QVBoxLayout(self)
self.vlForm.setObjectName("vl_ProjectMngForm")
self.vlForm.setSpacing(9)
self.vlForm.setMargin(9)
self.setWindowTitle("SubProject Manage Dialog")
self.basicFrame = Frame(self)
self.vlForm.addWidget(self.basicFrame)
self.frameName = Frame(self.basicFrame, "HL")
self.basicFrame.Add = self.frameName
self.frame = Frame(self.frameName)
self.frameName.Add = self.frame
self.comboProjectSubproject = ComboBoxPanel(self.frame)
self.comboProjectSubproject.Caption = "Project"
self.comboProjectSubproject.LabelWidth = 120
self.frame.Add = self.comboProjectSubproject
self.textNameSubproject = TextBoxPanel(self.frame)
self.textNameSubproject.Caption = "Sub-Project Name"
self.textNameSubproject.LabelWidth = 120
self.textNameSubproject.Width = 120
self.frame.Add = self.textNameSubproject
self.textFullName = TextBoxPanel(self.frame)
self.textFullName.Caption = "Full Name"
self.textFullName.LabelWidth = 120
self.textFullName.Width = 120
self.textFullName.Visible = False
self.frame.Add = self.textFullName
self.groubox = GroupBox(self.frameName)
self.groubox.Caption = "Sub-Projects"
self.frameName.Add = self.groubox
self.listBoxSubproject = ListBox(self.groubox)
self.groubox.Add = self.listBoxSubproject
self.textPathSubproject = TextBoxPanel(self.basicFrame)
self.textPathSubproject.Caption = "Sub-Project Path"
self.textPathSubproject.imageButton.setIcon(QIcon())
self.textPathSubproject.Button = "opens.png"
self.textPathSubproject.LabelWidth = 120
self.textPathSubproject.textBox.setMaximumWidth(10000)
self.textPathSubproject.textBox.setMinimumWidth(100)
self.basicFrame.Add = self.textPathSubproject
self.btnFrame = Frame(self.basicFrame, "HL")
self.basicFrame.Add = self.btnFrame
self.buttonAddSubproject = QPushButton(self.btnFrame)
self.buttonAddSubproject.setObjectName("buttonAddSubproject")
self.buttonAddSubproject.setText("Add")
self.btnFrame.Add = self.buttonAddSubproject
self.buttonModifySubproject = QPushButton(self.btnFrame)
self.buttonModifySubproject.setObjectName("buttonModifySubproject")
self.buttonModifySubproject.setText("Modify")
self.btnFrame.Add = self.buttonModifySubproject
self.buttonDeleteSubproject = QPushButton(self.btnFrame)
self.buttonDeleteSubproject.setObjectName("buttonDeleteSubproject")
self.buttonDeleteSubproject.setText("Delete")
self.btnFrame.Add = self.buttonDeleteSubproject
self.buttonCloseSubproject = QPushButton(self.btnFrame)
self.buttonCloseSubproject.setObjectName("buttonCloseSubproject")
self.buttonCloseSubproject.setText("Close")
self.btnFrame.Add = self.buttonCloseSubproject
self.connect(self.listBoxSubproject, SIGNAL("Event_0"),
self.listBoxSubproject_SelectedIndexChanged)
self.connect(self.textPathSubproject, SIGNAL("Event_1"),
self.buttonBrowseSubproject_Click)
self.connect(self.textNameSubproject, SIGNAL("Event_0"),
self.setFullName)
self.connect(self.comboProjectSubproject, SIGNAL("Event_0"),
self.setFullNameProjectNameChanged)
self.buttonCloseSubproject.clicked.connect(
self.buttonCloseSubproject_Click)
self.buttonDeleteSubproject.clicked.connect(
self.buttonDeleteSubproject_Click)
self.buttonModifySubproject.clicked.connect(
self.buttonModifySubproject_Click)
self.buttonAddSubproject.clicked.connect(
self.buttonAddSubproject_Click)
self.editFlag = True
for pi in AirCraftOperation.g_projectList.ProjectsList:
if pi.Pt == enumProjectType.ptSubProject:
self.listBoxSubproject.Add(pi.Name)
elif pi.Pt == enumProjectType.ptProject:
self.comboProjectSubproject.Add(pi.Name)
self.editFlag = False
self.setFullNameProjectNameChanged()
def setFullName(self):
if self.editFlag:
return
if self.comboProjectSubproject.Count <= 0:
return
self.editFlag = True
index = AirCraftOperation.g_projectList.Find(
self.comboProjectSubproject.SelectedItem,
enumProjectType.ptProject)
projPath = AirCraftOperation.g_projectList.ProjectsList[index].Path
self.textFullName.Value = self.comboProjectSubproject.SelectedItem + "_" + self.textNameSubproject.Value
self.textPathSubproject.Value = projPath + "/" + self.textNameSubproject.Value
self.editFlag = False
def setFullNameProjectNameChanged(self):
if self.editFlag:
return
self.editFlag = True
index = AirCraftOperation.g_projectList.Find(
self.comboProjectSubproject.SelectedItem,
enumProjectType.ptProject)
if index is None:
self.editFlag = False
return
projPath = AirCraftOperation.g_projectList.ProjectsList[index].Path
d = QDir(projPath)
fileInfoList = d.entryInfoList()
self.listBoxSubproject.Clear()
self.textNameSubproject.Value = ""
piList = AirCraftOperation.g_projectList.FindProjectListByPt(
enumProjectType.ptSubProject)
if len(piList) == 0:
self.editFlag = False
self.textPathSubproject.Value = projPath + "/" + self.textNameSubproject.Value
self.textFullName.Value = self.comboProjectSubproject.SelectedItem + "_" + self.textNameSubproject.Value
return
subProjNameList = []
i = 0
for pi in piList:
if pi.ProjName == self.comboProjectSubproject.SelectedItem:
subProjNameList.append(pi.SubProjName)
self.listBoxSubproject.Add(pi.SubProjName)
i += 1
if len(subProjNameList) > 0:
self.textNameSubproject.Value = subProjNameList[0]
self.textFullName.Value = self.comboProjectSubproject.SelectedItem + "_" + self.textNameSubproject.Value
self.textPathSubproject.Value = projPath + "/" + self.textNameSubproject.Value
self.editFlag = False
def CheckInputValues(self):
if self.textNameSubproject.Text is None or self.textNameSubproject.Text == "":
QMessageBox.warning(self, "Warning", "Please input project name!")
return False
if self.textPathSubproject.Text is None or self.textPathSubproject.Text == "":
QMessageBox.warning(self, "Warning", "Please input project path!")
return False
if self.comboProjectSubproject.SelectedIndex < 0:
QMessageBox.warning(self, "Warning", "Please select an project!")
return False
directory = QDir(self.textPathSubproject.Text)
if not directory.exists():
if QMessageBox.question(
self, "Question",
"Procedure path dose not exist! Do you create the directory?",
QMessageBox.Yes | QMessageBox.No) == QMessageBox.Yes:
directory.mkpath(self.textPathSubproject.Text)
else:
return False
return True
def listBoxSubproject_SelectedIndexChanged(self):
if self.listBoxSubproject.SelectedIndex < 0:
return
self.textFullName.Value = self.comboProjectSubproject.SelectedItem + "_" + self.listBoxSubproject.Items[
self.listBoxSubproject.SelectedIndex]
pi = AirCraftOperation.g_projectList.Find(self.textFullName.Value)
self.textNameSubproject.Text = AirCraftOperation.g_projectList.ProjectsList[
pi].Name
self.textPathSubproject.Text = AirCraftOperation.g_projectList.ProjectsList[
pi].Path
self.comboProjectSubproject.SelectedIndex = self.comboProjectSubproject.IndexOf(
AirCraftOperation.g_projectList.ProjectsList[pi].ProjName)
def buttonBrowseSubproject_Click(self):
folderPath = QFileDialog.getExistingDirectory(self,
"Open Project Path",
define.projectManageDir)
if folderPath is not None and folderPath != "":
self.textPathSubproject.Value = folderPath
define.projectManageDir = folderPath
def buttonCloseSubproject_Click(self):
res = QMessageBox.question(self, "Question",
"Save changes to project information?",
QMessageBox.Yes | QMessageBox.No)
if res == QMessageBox.Yes:
AirCraftOperation.g_projectList.WriteProjectInfoXml()
self.accept()
def buttonAddSubproject_Click(self):
if not self.CheckInputValues():
return
if AirCraftOperation.g_projectList.Find(
self.textFullName.Text) is not None:
QMessageBox.warning(self, "Warning", "The same sub-project exist!")
return
pi = ProjectInfo()
pi.Pt = enumProjectType.ptSubProject
pi.Name = self.textNameSubproject.Text
pi.SubProjName = self.textNameSubproject.Text
pi.Path = self.textPathSubproject.Text
pi.ProjName = self.comboProjectSubproject.SelectedItem
pi.UserName = AirCraftOperation.loginedUser.Name
pi.FullName = self.textFullName.Value
AirCraftOperation.g_projectList.Add(pi)
nIndex = self.listBoxSubproject.Add(pi.Name)
self.listBoxSubproject.SelectedIndex = nIndex
def buttonModifySubproject_Click(self):
if self.listBoxSubproject.SelectedIndex < 0:
QMessageBox.warning(self, "Warning",
"Please select project in the projects list!")
return
if not self.CheckInputValues():
return
index = AirCraftOperation.g_projectList.Find(
self.comboProjectSubproject.SelectedItem + "_" +
self.listBoxSubproject.Items[self.listBoxSubproject.SelectedIndex])
AirCraftOperation.g_projectList.ProjectsList[
index].Pt = enumProjectType.ptSubProject
AirCraftOperation.g_projectList.ProjectsList[
index].Name = self.textNameSubproject.Text
AirCraftOperation.g_projectList.ProjectsList[
index].SubProjName = self.textNameSubproject.Text
AirCraftOperation.g_projectList.ProjectsList[
index].Path = self.textPathSubproject.Text
AirCraftOperation.g_projectList.ProjectsList[
index].ProjName = self.comboProjectSubproject.SelectedItem
AirCraftOperation.g_projectList.ProjectsList[
index].UserName = AirCraftOperation.loginedUser.Name
AirCraftOperation.g_projectList.ProjectsList[
index].FullName = self.textFullName.Value
self.listBoxSubproject.Clear()
for pi in AirCraftOperation.g_projectList.ProjectsList:
if pi.Pt == enumProjectType.ptSubProject:
self.listBoxSubproject.Add(pi.Name)
def buttonDeleteSubproject_Click(self):
if self.listBoxSubproject.SelectedIndex < 0:
QMessageBox.warning(self, "Warning",
"Please select project in the projects list!")
return
if QMessageBox.question(
self, "Question",
"Are you sure to delete " + self.listBoxSubproject.Items[
self.listBoxSubproject.SelectedIndex] + "?",
QMessageBox.Yes | QMessageBox.No) == QMessageBox.No:
return
AirCraftOperation.g_projectList.Remove(self.textFullName.Value)
self.listBoxSubproject.Clear()
self.setFullNameProjectNameChanged()
AirCraftOperation.g_projectList.WriteProjectInfoXml()
class ProcedureMngForm(QDialog):
def __init__(self, parent=None):
QDialog.__init__(self)
self.setObjectName(("ui_ProcedureMngForm"))
self.resize(200, 200)
font = QFont()
font.setFamily(("Arial"))
font.setBold(False)
font.setWeight(50)
self.setFont(font)
self.setWindowTitle("Procedure Manage Dialog")
self.vlForm = QVBoxLayout(self)
self.vlForm.setObjectName(("vl_ProceduretMngForm"))
self.vlForm.setSpacing(9)
self.vlForm.setMargin(9)
self.basicFrame = Frame(self)
self.vlForm.addWidget(self.basicFrame)
self.frameName = Frame(self.basicFrame, "HL")
self.basicFrame.Add = self.frameName
self.frame = Frame(self.frameName)
self.frameName.Add = self.frame
self.comboProjectProcedure = ComboBoxPanel(self.frame)
self.comboProjectProcedure.Caption = "Project"
self.comboProjectProcedure.LabelWidth = 120
self.frame.Add = self.comboProjectProcedure
self.comboSubProjectProcedure = ComboBoxPanel(self.frame)
self.comboSubProjectProcedure.Caption = "Sub-Project"
self.comboSubProjectProcedure.LabelWidth = 120
self.frame.Add = self.comboSubProjectProcedure
self.comboWorkspaceProcedure = ComboBoxPanel(self.frame)
self.comboWorkspaceProcedure.Caption = "Workspace"
self.comboWorkspaceProcedure.LabelWidth = 120
self.frame.Add = self.comboWorkspaceProcedure
self.textNameProcedure = TextBoxPanel(self.frame)
self.textNameProcedure.Caption = "Procedure Name"
self.textNameProcedure.LabelWidth = 120
self.textNameProcedure.Width = 120
self.frame.Add = self.textNameProcedure
self.textFullName = TextBoxPanel(self.frame)
self.textFullName.Caption = "Full Name"
self.textFullName.LabelWidth = 120
self.textFullName.Width = 120
self.textFullName.Visible = False
self.frame.Add = self.textFullName
self.groubox = GroupBox(self.frameName)
self.groubox.Caption = "Procedures"
self.frameName.Add = self.groubox
self.listBoxProcedure = ListBox(self.groubox)
self.groubox.Add = self.listBoxProcedure
self.textPathProcedure = TextBoxPanel(self.basicFrame)
self.textPathProcedure.Caption = "Procedure Path"
self.textPathProcedure.imageButton.setIcon(QIcon())
self.textPathProcedure.Button = "opens.png"
self.textPathProcedure.LabelWidth = 120
self.textPathProcedure.textBox.setMaximumWidth(10000)
self.textPathProcedure.textBox.setMinimumWidth(100)
self.basicFrame.Add = self.textPathProcedure
self.btnFrame = Frame(self.basicFrame, "HL")
self.basicFrame.Add = self.btnFrame
self.buttonAddProcedure = QPushButton(self.btnFrame)
self.buttonAddProcedure.setObjectName("buttonAddProcedure")
self.buttonAddProcedure.setText("Add")
self.btnFrame.Add = self.buttonAddProcedure
self.buttonModifyProcedure = QPushButton(self.btnFrame)
self.buttonModifyProcedure.setObjectName("buttonModifyProcedure")
self.buttonModifyProcedure.setText("Modify")
self.btnFrame.Add = self.buttonModifyProcedure
self.buttonDeleteProcedure = QPushButton(self.btnFrame)
self.buttonDeleteProcedure.setObjectName("buttonDeleteProcedure")
self.buttonDeleteProcedure.setText("Delete")
self.btnFrame.Add = self.buttonDeleteProcedure
self.buttonSaveProcedure = QPushButton(self.btnFrame)
self.buttonSaveProcedure.setObjectName("buttonSaveProcedure")
self.buttonSaveProcedure.setText("Save")
self.buttonSaveProcedure.setVisible(False)
self.btnFrame.Add = self.buttonSaveProcedure
self.buttonCloseProcedure = QPushButton(self.btnFrame)
self.buttonCloseProcedure.setObjectName("buttonCloseProcedure")
self.buttonCloseProcedure.setText("Close")
self.btnFrame.Add = self.buttonCloseProcedure
self.connect(self.listBoxProcedure, SIGNAL("Event_0"),
self.listBoxProcedure_SelectedIndexChanged)
self.connect(self.comboProjectProcedure, SIGNAL("Event_0"),
self.comboProjectProcedure_SelectedIndexChanged)
self.connect(self.comboSubProjectProcedure, SIGNAL("Event_0"),
self.comboSubProjectProcedure_SelectedIndexChanged)
self.connect(self.textPathProcedure, SIGNAL("Event_1"),
self.buttonBrowseWorkspace_Click)
self.connect(self.comboWorkspaceProcedure, SIGNAL("Event_0"),
self.comboWorkspaceProcedure_SelectedIndexChanged)
self.connect(self.textNameProcedure, SIGNAL("Event_0"),
self.setFullName)
self.buttonCloseProcedure.clicked.connect(
self.buttonCloseProcedure_Click)
self.buttonSaveProcedure.clicked.connect(
self.buttonSaveProcedure_Click)
self.buttonDeleteProcedure.clicked.connect(
self.buttonDeleteProcedure_Click)
self.buttonModifyProcedure.clicked.connect(
self.buttonModifyProcedure_Click)
self.buttonAddProcedure.clicked.connect(self.buttonAddProcedure_Click)
self.editFlag = True
for pi in AirCraftOperation.g_projectList.ProjectsList:
if (pi.Pt == enumProjectType.ptFile):
self.listBoxProcedure.Add(pi.Name)
elif (pi.Pt == enumProjectType.ptProject):
self.comboProjectProcedure.Add(pi.Name)
elif (pi.Pt == enumProjectType.ptSubProject):
self.comboSubProjectProcedure.Add(pi.Name)
elif (pi.Pt == enumProjectType.ptWorkspace):
self.comboWorkspaceProcedure.Add(pi.Name)
self.editFlag = False
self.comboProjectProcedure_SelectedIndexChanged()
def setFullName(self):
if self.editFlag:
return
self.editFlag = True
index = AirCraftOperation.g_projectList.GetIndexOfWsOrProcedure(
enumProjectType.ptWorkspace,
self.comboProjectProcedure.SelectedItem,
self.comboSubProjectProcedure.SelectedItem,
self.comboWorkspaceProcedure.SelectedItem)
if index == None:
self.editFlag = False
return
projPath = AirCraftOperation.g_projectList.ProjectsList[index].Path
self.textFullName.Value = self.comboProjectProcedure.SelectedItem + "_" + self.comboSubProjectProcedure.SelectedItem + "_" + self.comboWorkspaceProcedure.SelectedItem + "_" + self.textNameProcedure.Text
self.textPathProcedure.Value = projPath + "/" + self.textNameProcedure.Value
self.editFlag = False
def CheckInputValues(self):
if (self.textNameProcedure.Text == None
or self.textNameProcedure.Text == ""):
QMessageBox.warning(self, "Warning", "Please input project name!")
return False
if (self.textPathProcedure.Text == None
or self.textPathProcedure.Text == ""):
QMessageBox.warning(self, "Warning", "Please input project path!")
return False
if (self.comboProjectProcedure.SelectedIndex < 0):
QMessageBox.warning(self, "Warning", "Please select an Project!")
return False
if (self.comboSubProjectProcedure.SelectedIndex < 0):
QMessageBox.warning(self, "Warning",
"Please select an Sub-Project!")
return False
if (self.comboWorkspaceProcedure.SelectedIndex < 0):
QMessageBox.warning(self, "Warning", "Please select an Workspace!")
return
directory = QDir(self.textPathProcedure.Text)
if (not directory.exists()):
if (QMessageBox.question(
self, "Question",
"Procedure path dose not exist! Do you create the directory?",
QMessageBox.Yes | QMessageBox.No) == QMessageBox.Yes):
directory.mkpath(self.textPathProcedure.Text)
else:
return False
return True
def listBoxProcedure_SelectedIndexChanged(self):
if (self.listBoxProcedure.SelectedIndex < 0):
return
pi = AirCraftOperation.g_projectList.Find(
self.listBoxProcedure.Items[self.listBoxProcedure.SelectedIndex])
pi = AirCraftOperation.g_projectList.GetIndexOfWsOrProcedure(
enumProjectType.ptFile, self.comboProjectProcedure.SelectedItem,
self.comboSubProjectProcedure.SelectedItem,
self.comboWorkspaceProcedure.SelectedItem,
self.listBoxProcedure.Items[self.listBoxProcedure.SelectedIndex])
if pi == None:
return
self.textNameProcedure.Text = AirCraftOperation.g_projectList.ProjectsList[
pi].Name
self.textPathProcedure.Text = AirCraftOperation.g_projectList.ProjectsList[
pi].Path
self.comboProjectProcedure.SelectedIndex = self.comboProjectProcedure.IndexOf(
AirCraftOperation.g_projectList.ProjectsList[pi].ProjName)
self.comboSubProjectProcedure.SelectedIndex = self.comboSubProjectProcedure.IndexOf(
AirCraftOperation.g_projectList.ProjectsList[pi].SubProjName)
self.comboWorkspaceProcedure.SelectedIndex = self.comboWorkspaceProcedure.IndexOf(
AirCraftOperation.g_projectList.ProjectsList[pi].WorkspaceName)
def buttonBrowseWorkspace_Click(self):
folderPath = QFileDialog.getExistingDirectory(self,
"Open Project Path",
define.projectManageDir)
if (folderPath != None and folderPath != ""):
self.textPathProcedure.Value = folderPath
define.projectManageDir = folderPath
def buttonSaveProcedure_Click(self):
res = QMessageBox.question(self, "Question",
"Save changes to project information?",
QMessageBox.Yes | QMessageBox.No)
if (res == QMessageBox.Yes):
AirCraftOperation.g_projectList.WriteProjectInfoXml()
self.buttonSaveProcedure.setEnabled(False)
def buttonCloseProcedure_Click(self):
res = QMessageBox.question(self, "Question",
"Save changes to project information?",
QMessageBox.Yes | QMessageBox.No)
if (res == QMessageBox.Yes):
AirCraftOperation.g_projectList.WriteProjectInfoXml()
self.buttonSaveProcedure.setEnabled(False)
self.accept()
def buttonAddProcedure_Click(self):
if (not self.CheckInputValues()):
return
index = AirCraftOperation.g_projectList.GetIndexOfWsOrProcedure(
enumProjectType.ptFile, self.comboProjectProcedure.SelectedItem,
self.comboSubProjectProcedure.SelectedItem,
self.comboWorkspaceProcedure.SelectedItem,
self.textNameProcedure.Text)
if (index != None):
QMessageBox.warning(self, "Warning", "The same name exist!")
return
pi = ProjectInfo()
pi.Pt = enumProjectType.ptFile
pi.Name = self.textNameProcedure.Text
pi.ProcedureName = self.textNameProcedure.Text
pi.Path = self.textPathProcedure.Text
pi.ProjName = self.comboProjectProcedure.SelectedItem
pi.SubProjName = self.comboSubProjectProcedure.SelectedItem
pi.WorkspaceName = self.comboWorkspaceProcedure.SelectedItem
pi.FullName = self.textFullName.Text
pi.UserName = AirCraftOperation.loginedUser.Name
AirCraftOperation.g_projectList.Add(pi)
nIndex = self.listBoxProcedure.Add(pi.Name)
self.listBoxProcedure.SelectedIndex = nIndex
self.buttonSaveProcedure.setEnabled(True)
def buttonModifyProcedure_Click(self):
if (self.listBoxProcedure.SelectedIndex < 0):
QMessageBox.warning(self, "Warning",
"Please select project in the projects list!")
return
if (not self.CheckInputValues()):
return
index = AirCraftOperation.g_projectList.GetIndexOfWsOrProcedure(
enumProjectType.ptFile, self.comboProjectProcedure.SelectedItem,
self.comboSubProjectProcedure.SelectedItem,
self.comboWorkspaceProcedure.SelectedItem,
self.listBoxProcedure.Items[self.listBoxProcedure.SelectedIndex])
AirCraftOperation.g_projectList.ProjectsList[
index].Pt = enumProjectType.ptFile
AirCraftOperation.g_projectList.ProjectsList[
index].Name = self.textNameProcedure.Text
AirCraftOperation.g_projectList.ProjectsList[
index].ProcedureName = self.textNameProcedure.Text
AirCraftOperation.g_projectList.ProjectsList[
index].Path = self.textPathProcedure.Text
AirCraftOperation.g_projectList.ProjectsList[
index].ProjName = self.comboProjectProcedure.SelectedItem
AirCraftOperation.g_projectList.ProjectsList[
index].SubProjName = self.comboSubProjectProcedure.SelectedItem
AirCraftOperation.g_projectList.ProjectsList[
index].WorkspaceName = self.comboWorkspaceProcedure.SelectedItem
AirCraftOperation.g_projectList.ProjectsList[
index].FullName = self.textFullName.Text
AirCraftOperation.g_projectList.ProjectsList[
index].UserName = AirCraftOperation.loginedUser.Name
self.listBoxProcedure.Clear()
self.comboProjectProcedure_SelectedIndexChanged()
# for pi in AirCraftOperation.g_projectList.ProjectsList:
# if (pi.Pt == enumProjectType.ptFile):
# self.listBoxProcedure.Add(pi.Name)
# AirCraftOperation.g_projectList.Remove(pi)
#
# AirCraftOperation.g_projectList.Add(pi)
self.buttonSaveProcedure.setEnabled(True)
def buttonDeleteProcedure_Click(self):
if (self.listBoxProcedure.SelectedIndex < 0):
QMessageBox.warning(self, "Warning",
"Please select project in the projects list!")
return
if (QMessageBox.question(
self, "Question",
"Are you sure to delete " + self.listBoxProcedure.Items[
self.listBoxProcedure.SelectedIndex] + "?",
QMessageBox.Yes | QMessageBox.No) == QMessageBox.No):
return
index = AirCraftOperation.g_projectList.GetIndexOfWsOrProcedure(
enumProjectType.ptFile, self.comboProjectProcedure.SelectedItem,
self.comboSubProjectProcedure.SelectedItem,
self.comboWorkspaceProcedure.SelectedItem,
self.listBoxProcedure.Items[self.listBoxProcedure.SelectedIndex])
AirCraftOperation.g_projectList.Remove(index)
self.buttonSaveProcedure.setEnabled(True)
self.listBoxProcedure.Clear()
self.comboProjectProcedure_SelectedIndexChanged()
AirCraftOperation.g_projectList.WriteProjectInfoXml()
# for pi in AirCraftOperation.g_projectList.ProjectsList:
# if (pi.Pt == enumProjectType.ptFile):
# self.listBoxProcedure.Add(pi.Name)
def comboProjectProcedure_SelectedIndexChanged(self):
if self.editFlag:
return
listSubprojects = AirCraftOperation.g_projectList.GetLinkedProjects(
self.comboProjectProcedure.SelectedItem, enumProjectType.ptProject,
enumProjectType.ptSubProject)
self.editFlag = True
self.comboSubProjectProcedure.Clear()
if (listSubprojects != None and len(listSubprojects) > 0):
self.comboSubProjectProcedure.Items = listSubprojects
self.comboSubProjectProcedure.SelectedIndex = 0
self.editFlag = False
self.comboSubProjectProcedure_SelectedIndexChanged()
def comboSubProjectProcedure_SelectedIndexChanged(self):
if self.editFlag:
return
listWorkspaceList = AirCraftOperation.g_projectList.GetListOfWsOrProcedure(
enumProjectType.ptWorkspace,
self.comboProjectProcedure.SelectedItem,
self.comboSubProjectProcedure.SelectedItem)
self.editFlag = True
self.comboWorkspaceProcedure.Clear()
if (listWorkspaceList != None and len(listWorkspaceList) > 0):
self.comboWorkspaceProcedure.Items = listWorkspaceList
self.comboWorkspaceProcedure.SelectedIndex = 0
self.editFlag = False
self.comboWorkspaceProcedure_SelectedIndexChanged()
def comboWorkspaceProcedure_SelectedIndexChanged(self):
if self.editFlag:
return
listProcedureList = AirCraftOperation.g_projectList.GetListOfWsOrProcedure(
enumProjectType.ptFile, self.comboProjectProcedure.SelectedItem,
self.comboSubProjectProcedure.SelectedItem,
self.comboWorkspaceProcedure.SelectedItem)
self.textNameProcedure.Text = ""
self.listBoxProcedure.Clear()
self.editFlag = True
if len(listProcedureList) > 0:
self.listBoxProcedure.Items = listProcedureList
self.listBoxProcedure.SelectedIndex = 0
self.editFlag = False
self.setFullName()
