def convert_line_to_transformer(self, line: Line):
"""
Convert a line to Transformer
:param line: Line instance
:return: Nothing
"""
transformer = Transformer2W(bus_from=line.bus_from,
bus_to=line.bus_to,
name='Transformer',
active=line.active,
rate=line.rate,
r=line.R,
x=line.X,
b=line.B,
active_prof=line.active_prof,
rate_prof=line.rate_prof)
# add device to the circuit
self.circuit.add_transformer2w(transformer)
# add device to the schematic
transformer.graphic_obj = self.add_api_transformer(transformer)
# update position
transformer.graphic_obj.fromPort.update()
transformer.graphic_obj.toPort.update()
# delete the line from the circuit
self.circuit.delete_line(line)
# delete from the schematic
self.diagramScene.removeItem(line.graphic_obj)
def convert_branch(branch: Branch):
"""
:param branch:
:return:
"""
if branch.branch_type == BranchType.Line:
return Line(bus_from=branch.bus_from,
bus_to=branch.bus_to,
name=branch.name,
r=branch.R,
x=branch.X,
b=branch.B,
rate=branch.rate,
active=branch.active,
tolerance=branch.tolerance,
cost=branch.Cost,
mttf=branch.mttf,
mttr=branch.mttr,
r_fault=branch.r_fault,
x_fault=branch.x_fault,
fault_pos=branch.fault_pos,
length=branch.length,
temp_base=branch.temp_base,
temp_oper=branch.temp_oper,
alpha=branch.alpha,
rate_prof=branch.rate_prof,
Cost_prof=branch.Cost_prof,
active_prof=branch.active_prof,
temp_oper_prof=branch.temp_oper_prof)
elif branch.branch_type == BranchType.Transformer:
return Transformer2W(bus_from=branch.bus_from,
bus_to=branch.bus_to,
name=branch.name,
r=branch.R,
x=branch.X,
b=branch.B,
rate=branch.rate,
active=branch.active,
tolerance=branch.tolerance,
cost=branch.Cost,
mttf=branch.mttf,
mttr=branch.mttr,
tap=branch.tap_module,
shift_angle=branch.angle,
vset=branch.vset,
bus_to_regulated=branch.bus_to_regulated,
temp_base=branch.temp_base,
temp_oper=branch.temp_oper,
alpha=branch.alpha,
template=branch.template,
rate_prof=branch.rate_prof,
Cost_prof=branch.Cost_prof,
active_prof=branch.active_prof,
temp_oper_prof=branch.temp_oper_prof)
else:
return branch
def add_transformer(self, branch: Transformer2W):
"""
Add branch to the schematic
:param branch: Branch object
"""
terminal_from = branch.bus_from.graphic_obj.terminal
terminal_to = branch.bus_to.graphic_obj.terminal
graphic_obj = TransformerGraphicItem(terminal_from, terminal_to, self.diagramScene, branch=branch)
graphic_obj.diagramScene.circuit = self.circuit # add pointer to the circuit
terminal_from.hosting_connections.append(graphic_obj)
terminal_to.hosting_connections.append(graphic_obj)
graphic_obj.redraw()
branch.graphic_obj = graphic_obj
def scene_mouse_release_event(self, event):
"""
Finalize the branch creation if its drawing ends in a terminal
@param event:
@return:
"""
# Clear or finnish the started connection:
if self.started_branch:
pos = event.scenePos()
items = self.diagramScene.items(pos) # get the item (the terminal) at the mouse position
for item in items:
if type(item) is TerminalItem: # connect only to terminals
if item.parent is not self.started_branch.fromPort.parent: # forbid connecting to itself
self.started_branch.setToPort(item)
item.hosting_connections.append(self.started_branch)
self.started_branch.bus_to = item.parent
if self.started_branch.bus_from.api_object.is_dc != self.started_branch.bus_to.api_object.is_dc:
# different DC status -> VSC
name = 'VSC ' + str(len(self.circuit.vsc_devices) + 1)
obj = VSC(bus_from=self.started_branch.bus_from.api_object,
bus_to=self.started_branch.bus_to.api_object,
name=name)
obj.graphic_obj = VscGraphicItem(fromPort=self.started_branch.fromPort,
toPort=self.started_branch.toPort,
diagramScene=self.diagramScene,
branch=obj)
elif self.started_branch.bus_from.api_object.is_dc and self.started_branch.bus_to.api_object.is_dc:
# both buses are DC
name = 'Dc line ' + str(len(self.circuit.dc_lines) + 1)
obj = DcLine(bus_from=self.started_branch.bus_from.api_object,
bus_to=self.started_branch.bus_to.api_object,
name=name)
obj.graphic_obj = DcLineGraphicItem(fromPort=self.started_branch.fromPort,
toPort=self.started_branch.toPort,
diagramScene=self.diagramScene,
branch=obj)
else:
# Same DC status -> line / trafo
v1 = self.started_branch.bus_from.api_object.Vnom
v2 = self.started_branch.bus_to.api_object.Vnom
if abs(v1 - v2) > 1.0:
name = 'Transformer ' + str(len(self.circuit.transformers2w) + 1)
obj = Transformer2W(bus_from=self.started_branch.bus_from.api_object,
bus_to=self.started_branch.bus_to.api_object,
name=name)
obj.graphic_obj = TransformerGraphicItem(fromPort=self.started_branch.fromPort,
toPort=self.started_branch.toPort,
diagramScene=self.diagramScene,
branch=obj)
else:
name = 'Line ' + str(len(self.circuit.lines) + 1)
obj = Line(bus_from=self.started_branch.bus_from.api_object,
bus_to=self.started_branch.bus_to.api_object,
name=name)
obj.graphic_obj = LineGraphicItem(fromPort=self.started_branch.fromPort,
toPort=self.started_branch.toPort,
diagramScene=self.diagramScene,
branch=obj)
# add the new object to the circuit
self.circuit.add_branch(obj)
# update the connection placement
obj.graphic_obj.fromPort.update()
obj.graphic_obj.toPort.update()
# set the connection placement
obj.graphic_obj.setZValue(-1)
# if self.started_branch.toPort is None:
self.started_branch.remove_widget()
# release this pointer
self.started_branch = None
def test_basic():
"""
Basic GridCal test, also useful for a basic tutorial. In this case the
magnetizing branch of the transformers is neglected by inputting 1e-20
excitation current and iron core losses.
The results are identical to ETAP's, which always uses this assumption in
balanced load flow calculations.
"""
test_name = "test_basic"
grid = MultiCircuit(name=test_name)
S_base = 100 # MVA
grid.Sbase = S_base
grid.time_profile = None
grid.logger = Logger()
# Create buses
POI = Bus(
name="POI",
vnom=100, # kV
is_slack=True)
grid.add_bus(POI)
B_C3 = Bus(name="B_C3", vnom=10) # kV
grid.add_bus(B_C3)
B_MV_M32 = Bus(name="B_MV_M32", vnom=10) # kV
grid.add_bus(B_MV_M32)
B_LV_M32 = Bus(name="B_LV_M32", vnom=0.6) # kV
grid.add_bus(B_LV_M32)
# Create voltage controlled generators (or slack, a.k.a. swing)
UT = Generator(name="Utility")
UT.bus = POI
grid.add_generator(POI, UT)
# Create static generators (with fixed power factor)
M32 = StaticGenerator(
name="M32",
P=4.2, # MW
Q=0.0j) # MVAr
M32.bus = B_LV_M32
grid.add_static_generator(B_LV_M32, M32)
# Create transformer types
s = 5 # MVA
z = 8 # %
xr = 40
SS = TransformerType(
name="SS",
hv_nominal_voltage=100, # kV
lv_nominal_voltage=10, # kV
nominal_power=s,
copper_losses=complex_impedance(z, xr).real * s * 1000 / S_base,
iron_losses=1e-20,
no_load_current=1e-20,
short_circuit_voltage=z)
grid.add_transformer_type(SS)
s = 5 # MVA
z = 6 # %
xr = 20
PM = TransformerType(
name="PM",
hv_nominal_voltage=10, # kV
lv_nominal_voltage=0.6, # kV
nominal_power=s,
copper_losses=complex_impedance(z, xr).real * s * 1000 / S_base,
iron_losses=1e-20,
no_load_current=1e-20,
short_circuit_voltage=z)
grid.add_transformer_type(PM)
# Create branches
X_C3 = Transformer2W(bus_from=POI, bus_to=B_C3, name="X_C3", template=SS)
grid.add_transformer2w(X_C3)
C_M32 = Transformer2W(bus_from=B_C3,
bus_to=B_MV_M32,
name="C_M32",
r=0.784,
x=0.174)
grid.add_transformer2w(C_M32)
X_M32 = Transformer2W(bus_from=B_MV_M32,
bus_to=B_LV_M32,
name="X_M32",
template=PM)
grid.add_transformer2w(X_M32)
# Apply templates (device types)
grid.apply_all_branch_types()
print("Buses:")
for i, b in enumerate(grid.buses):
print(f" - bus[{i}]: {b}")
print()
options = PowerFlowOptions(SolverType.NR,
verbose=True,
initialize_with_existing_solution=True,
multi_core=True,
control_q=ReactivePowerControlMode.Direct,
tolerance=1e-6,
max_iter=99)
power_flow = PowerFlowDriver(grid, options)
power_flow.run()
approx_volt = [round(100 * abs(v), 1) for v in power_flow.results.voltage]
solution = [
100.0, 99.6, 102.7, 102.9
] # Expected solution from GridCal and ETAP 16.1.0, for reference
print()
print(f"Test: {test_name}")
print(f"Results: {approx_volt}")
print(f"Solution: {solution}")
print()
print("Generators:")
for g in grid.get_generators():
print(f" - Generator {g}: q_min={g.Qmin}pu, q_max={g.Qmax}pu")
print()
print("Branches:")
branches = grid.get_branches()
for b in branches:
print(f" - {b}:")
print(f" R = {round(b.R, 4)} pu")
print(f" X = {round(b.X, 4)} pu")
print(f" X/R = {round(b.X/b.R, 1)}")
print(f" G = {round(b.G, 4)} pu")
print(f" B = {round(b.B, 4)} pu")
print()
print("Transformer types:")
for t in grid.transformer_types:
print(
f" - {t}: Copper losses={int(t.Pcu)}kW, Iron losses={int(t.Pfe)}kW, SC voltage={t.Vsc}%"
)
print()
print("Losses:")
for i in range(len(branches)):
print(
f" - {branches[i]}: losses={1000*round(power_flow.results.losses[i], 3)} kVA"
)
print()
equal = True
for i in range(len(approx_volt)):
if approx_volt[i] != solution[i]:
equal = False
assert equal
def test_pv_1():
"""
Voltage controlled generator test, also useful for a basic tutorial. In this
case the generator M32 regulates the voltage at a setpoint of 1.025 pu, and
the slack bus (POI) regulates it at 1.0 pu.
The transformers' magnetizing branch losses are considered, but their
voltage regulators aren't.
"""
test_name = "test_pv_1"
grid = MultiCircuit(name=test_name)
Sbase = 100 # MVA
grid.Sbase = Sbase
grid.time_profile = None
grid.logger = Logger()
# Create buses
POI = Bus(
name="POI",
vnom=100, # kV
is_slack=True)
grid.add_bus(POI)
B_MV_M32 = Bus(name="B_MV_M32", vnom=10) # kV
grid.add_bus(B_MV_M32)
B_LV_M32 = Bus(name="B_LV_M32", vnom=0.6) # kV
grid.add_bus(B_LV_M32)
# Create voltage controlled generators (or slack, a.k.a. swing)
UT = Generator(name="Utility")
UT.bus = POI
grid.add_generator(POI, UT)
M32 = Generator(name="M32",
active_power=4.2,
voltage_module=1.025,
Qmin=-2.5,
Qmax=2.5)
M32.bus = B_LV_M32
grid.add_generator(B_LV_M32, M32)
# Create transformer types
s = 100 # MVA
z = 8 # %
xr = 40
SS = TransformerType(
name="SS",
hv_nominal_voltage=100, # kV
lv_nominal_voltage=10, # kV
nominal_power=s,
copper_losses=complex_impedance(z, xr).real * s * 1000 / Sbase,
iron_losses=125, # kW
no_load_current=0.5, # %
short_circuit_voltage=z)
grid.add_transformer_type(SS)
s = 5 # MVA
z = 6 # %
xr = 20
PM = TransformerType(
name="PM",
hv_nominal_voltage=10, # kV
lv_nominal_voltage=0.6, # kV
nominal_power=s,
copper_losses=complex_impedance(z, xr).real * s * 1000 / Sbase,
iron_losses=6.25, # kW
no_load_current=0.5, # %
short_circuit_voltage=z)
grid.add_transformer_type(PM)
# Create branches
X_C3 = Transformer2W(bus_from=POI,
bus_to=B_MV_M32,
name="X_C3",
template=SS)
grid.add_branch(X_C3)
X_M32 = Transformer2W(bus_from=B_MV_M32,
bus_to=B_LV_M32,
name="X_M32",
template=PM)
grid.add_branch(X_M32)
# Apply templates (device types)
grid.apply_all_branch_types()
print("Buses:")
for i, b in enumerate(grid.buses):
print(f" - bus[{i}]: {b}")
print()
options = PowerFlowOptions(SolverType.LM,
verbose=True,
initialize_with_existing_solution=True,
multi_core=True,
control_q=ReactivePowerControlMode.Direct,
tolerance=1e-6,
max_iter=99)
power_flow = PowerFlowDriver(grid, options)
power_flow.run()
approx_volt = [round(100 * abs(v), 1) for v in power_flow.results.voltage]
solution = [
100.0, 100.1, 102.5
] # Expected solution from GridCal and ETAP 16.1.0, for reference
print()
print(f"Test: {test_name}")
print(f"Results: {approx_volt}")
print(f"Solution: {solution}")
print()
print("Generators:")
for g in grid.get_generators():
print(f" - Generator {g}: q_min={g.Qmin}pu, q_max={g.Qmax}pu")
print()
print("Branches:")
branches = grid.get_branches()
for b in branches:
print(f" - {b}:")
print(f" R = {round(b.R, 4)} pu")
print(f" X = {round(b.X, 4)} pu")
print(f" X/R = {round(b.X / b.R, 1)}")
print(f" G = {round(b.G, 4)} pu")
print(f" B = {round(b.B, 4)} pu")
print()
print("Transformer types:")
for t in grid.transformer_types:
print(
f" - {t}: Copper losses={int(t.Pcu)}kW, Iron losses={int(t.Pfe)}kW, SC voltage={t.Vsc}%"
)
print()
print("Losses:")
for i in range(len(branches)):
print(
f" - {branches[i]}: losses={1000 * round(power_flow.results.losses[i], 3)} kVA"
)
print()
equal = True
for i in range(len(approx_volt)):
if approx_volt[i] != solution[i]:
equal = False
assert equal