def init(self):
"""Initialize."""
init_status = False
self.address_done = False
self.total_bytes = 0
self.address = []
self.selected_bytes = []
self.hex_lower = common.use_hex_lowercase()
# Get Seetings from settings file
group_size = self.view.settings().get("hex_viewer_bits", None)
self.inspector_enabled = common.hv_settings("inspector", False)
self.throttle = common.hv_settings("highlight_throttle", THROTTLING)
self.max_highlight = common.hv_settings("highlight_max_bytes", MAX_HIGHIGHT)
self.bytes_wide = self.view.settings().get("hex_viewer_actual_bytes", None)
self.highlight_scope = common.hv_settings("highlight_scope", HIGHLIGHT_SCOPE)
self.highlight_icon = common.hv_settings("highlight_icon", HIGHLIGHT_ICON)
self.enable_fake_hex = common.hv_settings("enable_fake_hex_file", True)
style = common.hv_settings("highlight_style", HIGHLIGHT_STYLE)
if (group_size is None or self.bytes_wide is None) and self.enable_fake_hex:
m = re.match(r'([\da-z]{8}):[\s]{2}((?:[\da-z]+[\s]{1})*)\s*\:[\w\W]*', self.view.substr(self.view.line(0)))
if m is not None:
starting_address = int(m.group(1), 16)
hex_chars = m.group(2).split(' ')
group_size = (len(hex_chars[0]) / 2) * 8
self.bytes_wide = (len(hex_chars[0]) / 2) * (len(hex_chars) - 1)
self.view.settings().set("hex_viewer_bits", group_size)
self.view.settings().set("hex_viewer_actual_bytes", self.bytes_wide)
self.view.settings().set("hex_viewer_fake", True)
self.view.settings().set("hex_viewer_starting_address", starting_address)
self.view.set_read_only(True)
self.view.set_scratch(True)
if common.hv_settings("inspector", False) and common.hv_settings("inspector_auto_show", False):
self.view.window().run_command("hex_show_inspector")
# No icon?
if self.highlight_icon == "none":
self.highlight_icon = ""
# Process highlight style
self.highlight_style = 0
if style == "outline":
self.highlight_style = sublime.DRAW_OUTLINED
elif style == "none":
self.highlight_style = sublime.HIDDEN
elif style == "underline":
self.highlight_style = sublime.DRAW_EMPTY_AS_OVERWRITE
# Process hex grouping
if group_size is not None and self.bytes_wide is not None:
self.group_size = group_size / common.BITS_PER_BYTE
self.hex_char_range = common.get_hex_char_range(self.group_size, self.bytes_wide)
init_status = True
return init_status
def init(self):
"""Initialize."""
init_status = False
self.address_done = False
self.total_bytes = 0
self.address = []
self.selected_bytes = []
self.hex_lower = common.use_hex_lowercase()
# Get Seetings from settings file
group_size = self.view.settings().get("hex_viewer_bits", None)
self.inspector_enabled = common.hv_settings("inspector", False)
self.throttle = common.hv_settings("highlight_throttle", THROTTLING)
self.max_highlight = common.hv_settings("highlight_max_bytes", MAX_HIGHIGHT)
self.bytes_wide = self.view.settings().get("hex_viewer_actual_bytes", None)
self.highlight_scope = common.hv_settings("highlight_scope", HIGHLIGHT_SCOPE)
self.highlight_icon = common.hv_settings("highlight_icon", HIGHLIGHT_ICON)
self.enable_fake_hex = common.hv_settings("enable_fake_hex_file", True)
style = common.hv_settings("highlight_style", HIGHLIGHT_STYLE)
if (group_size is None or self.bytes_wide is None) and self.enable_fake_hex:
m = re.match(r'([\da-z]{8}):[\s]{2}((?:[\da-z]+[\s]{1})*)\s*\:[\w\W]*', self.view.substr(self.view.line(0)))
if m is not None:
starting_address = int(m.group(1), 16)
hex_chars = m.group(2).split(' ')
group_size = (len(hex_chars[0]) / 2) * 8
self.bytes_wide = (len(hex_chars[0]) / 2) * (len(hex_chars) - 1)
self.view.settings().set("hex_viewer_bits", group_size)
self.view.settings().set("hex_viewer_actual_bytes", self.bytes_wide)
self.view.settings().set("hex_viewer_fake", True)
self.view.settings().set("hex_viewer_starting_address", starting_address)
self.view.set_read_only(True)
self.view.set_scratch(True)
if common.hv_settings("inspector", False) and common.hv_settings("inspector_auto_show", False):
self.view.window().run_command("hex_show_inspector")
# No icon?
if self.highlight_icon == "none":
self.highlight_icon = ""
# Process highlight style
self.highlight_style = 0
if style == "outline":
self.highlight_style = sublime.DRAW_OUTLINED
elif style == "none":
self.highlight_style = sublime.HIDDEN
elif style == "underline":
self.highlight_style = sublime.DRAW_EMPTY_AS_OVERWRITE
# Process hex grouping
if group_size is not None and self.bytes_wide is not None:
self.group_size = group_size / common.BITS_PER_BYTE
self.hex_char_range = common.get_hex_char_range(self.group_size, self.bytes_wide)
init_status = True
return init_status
def run(self):
"""Run command."""
self.view = self.window.active_view()
# Identify view
if self.handshake != -1 and self.handshake == self.view.id():
self.reset()
self.handshake = self.view.id()
# Single selection?
if len(self.view.sel()) == 1:
# Init
if not self.init():
self.reset()
return
sel = self.view.sel()[0]
start = sel.begin()
end = sel.end()
num_bytes = 0
# Get range of hex data
line = self.view.line(start)
range_start = line.begin() + common.ADDRESS_OFFSET
range_end = range_start + common.get_hex_char_range(self.group_size, self.bytes_wide)
hex_range = sublime.Region(range_start, range_end)
if self.view.score_selector(start, "comment"):
start, end, num_bytes = self.ascii_to_hex(start, end)
# Determine if selection is within hex range
if start >= hex_range.begin() and end <= hex_range.end():
# Adjust beginning of selection to begining of first selected byte
if num_bytes == 0:
start, end, num_bytes = common.adjust_hex_sel(self.view, start, end, self.group_size)
# Get general line info for diffing and editing
if num_bytes != 0:
self.ascii_pos = hex_range.end() + common.ASCII_OFFSET
self.total_bytes = num_bytes
self.start_pos = start
self.end_pos = end + 1
selection = self.view.substr(sublime.Region(start, end + 1))
self.line = {
"range": line,
"address": self.view.substr(sublime.Region(line.begin(), line.begin() + common.ADDRESS_OFFSET)),
"selection": selection.replace(" ", ""),
"data1": self.view.substr(sublime.Region(hex_range.begin(), start)).replace(" ", ""),
"data2": self.view.substr(sublime.Region(end + 1, hex_range.end() + 1)).replace(" ", "")
}
# Send selected bytes to be edited
self.edit_panel(selection.strip())
def run(self):
"""Run command."""
self.view = self.window.active_view()
# Identify view
if self.handshake != -1 and self.handshake == self.view.id():
self.reset()
self.handshake = self.view.id()
# Single selection?
if len(self.view.sel()) == 1:
# Init
if not self.init():
self.reset()
return
sel = self.view.sel()[0]
start = sel.begin()
end = sel.end()
num_bytes = 0
# Get range of hex data
line = self.view.line(start)
range_start = line.begin() + common.ADDRESS_OFFSET
range_end = range_start + common.get_hex_char_range(self.group_size, self.bytes_wide)
hex_range = sublime.Region(range_start, range_end)
if self.view.score_selector(start, "comment"):
start, end, num_bytes = self.ascii_to_hex(start, end)
# Determine if selection is within hex range
if start >= hex_range.begin() and end <= hex_range.end():
# Adjust beginning of selection to begining of first selected byte
if num_bytes == 0:
start, end, num_bytes = common.adjust_hex_sel(self.view, start, end, self.group_size)
# Get general line info for diffing and editing
if num_bytes != 0:
self.ascii_pos = hex_range.end() + common.ASCII_OFFSET
self.total_bytes = num_bytes
self.start_pos = start
self.end_pos = end + 1
selection = self.view.substr(sublime.Region(start, end + 1))
self.line = {
"range": line,
"address": self.view.substr(sublime.Region(line.begin(), line.begin() + common.ADDRESS_OFFSET)),
"selection": selection.replace(" ", ""),
"data1": self.view.substr(sublime.Region(hex_range.begin(), start)).replace(" ", ""),
"data2": self.view.substr(sublime.Region(end + 1, hex_range.end() + 1)).replace(" ", "")
}
# Send selected bytes to be edited
self.edit_panel(selection.strip())
