def load_model(self, model_fname, train_fname):
"""
Load the matrix from the model file.
"""
self.Cinv = genfromtxt("%s.matrix" % model_fname)
train_file = SEQUENTIAL_FILE_READER(train_fname)
train_vects = train_file.read()
train_file.close()
(self.D, self.t) = get_train_data(train_vects)
para_file = open(model_fname)
self.beta = float(para_file.readline().split()[1])
kernel_type = para_file.readline().strip().split("\t")[1]
if kernel_type == "GAUSSIAN_QUADRATIC_KERNEL":
self.kernel = GAUSSIAN_QUADRATIC_KERNEL()
for i in range(0, 4):
(para, val) = para_file.readline().strip().split()
if para == "theta_0":
self.kernel.theta_0 = float(val)
elif para == "theta_1":
self.kernel.theta_1 = float(val)
elif para == "theta_2":
self.kernel.theta_2 = float(val)
elif para == "theta_3":
self.kernel.theta_3 = float(val)
para_file.close()
pass
def train_GPR(train_fname,
model_fname,
verbose=True,
beta=1,
theta_0=None,
theta_1=None,
theta_2=None,
theta_3=None):
"""
This is the utility function used to train a regression
model using Gaussian Process.
"""
train_file = SEQUENTIAL_FILE_READER(train_fname)
train_vects = train_file.read()
train_file.close()
learner = GPR()
learner.verbose = verbose
learner.beta = beta
kernel = GAUSSIAN_QUADRATIC_KERNEL()
if theta_0:
kernel.theta_0 = theta_0
if theta_1:
kernel.theta_1 = theta_1
if theta_2:
kernel.theta_2 = theta_2
if theta_3:
kernel.theta_3 = theta_3
learner.set_kernel(kernel)
learner.train(train_vects)
learner.save_model(model_fname)
pass
def predict_GPR(test_fname,
train_fname,
model_fname,
output_fname=None,
accuracy=False):
"""
Predict the outputs for the test instances.
If the output is not specified, then
write to the standard output.
"""
test_file = SEQUENTIAL_FILE_READER(test_fname)
test_vects = test_file.read()
test_file.close()
learner = GPR()
learner.load_model(model_fname, train_fname)
count = 0
error = 0
if output_fname:
output_file = SEQUENTIAL_FILE_WRITER(output_fname)
else:
output_file = SEQUENTIAL_FILE_WRITER(None, "STDOUT")
for v in test_vects["vects"]:
(mean, variance) = learner.predict(v)
output_file.writeLine("%f\t%f\n" % (mean, variance))
if accuracy:
error += (v.label - mean)**2
count += 1
error = sqrt(error) / float(count)
if accuracy:
output_file.writeLine("RMSE = %f\n" % error)
output_file.close()
pass
def load_model(self, model_fname, train_fname):
"""
Load the matrix from the model file.
"""
self.Cinv = genfromtxt("%s.matrix" % model_fname)
train_file = SEQUENTIAL_FILE_READER(train_fname)
train_vects = train_file.read()
train_file.close()
(self.D, self.t) = get_train_data(train_vects)
para_file = open(model_fname)
self.beta = float(para_file.readline().split()[1])
kernel_type = para_file.readline().strip().split("\t")[1]
if kernel_type == "GAUSSIAN_QUADRATIC_KERNEL":
self.kernel = GAUSSIAN_QUADRATIC_KERNEL()
for i in range(0,4):
(para,val) = para_file.readline().strip().split()
if para == "theta_0":
self.kernel.theta_0 = float(val)
elif para == "theta_1":
self.kernel.theta_1 = float(val)
elif para == "theta_2":
self.kernel.theta_2 = float(val)
elif para == "theta_3":
self.kernel.theta_3 = float(val)
para_file.close()
pass
def predict_GPR(test_fname,
train_fname,
model_fname,
output_fname=None,
accuracy=False):
"""
Predict the outputs for the test instances.
If the output is not specified, then
write to the standard output.
"""
test_file = SEQUENTIAL_FILE_READER(test_fname)
test_vects = test_file.read()
test_file.close()
learner = GPR()
learner.load_model(model_fname, train_fname)
count = 0
error = 0
if output_fname:
output_file = SEQUENTIAL_FILE_WRITER(output_fname)
else:
output_file = SEQUENTIAL_FILE_WRITER(None, "STDOUT")
for v in test_vects["vects"]:
(mean, variance) = learner.predict(v)
output_file.writeLine("%f\t%f\n" % (mean, variance))
if accuracy:
error += (v.label - mean) ** 2
count += 1
error = sqrt(error) / float(count)
if accuracy:
output_file.writeLine("RMSE = %f\n" % error)
output_file.close()
pass
def train_GPR(train_fname, model_fname,
verbose=True,
beta=1,
theta_0=None, theta_1=None,
theta_2=None, theta_3=None):
"""
This is the utility function used to train a regression
model using Gaussian Process.
"""
train_file = SEQUENTIAL_FILE_READER(train_fname)
train_vects = train_file.read()
train_file.close()
learner = GPR()
learner.verbose = verbose
learner.beta = beta
kernel = GAUSSIAN_QUADRATIC_KERNEL()
if theta_0:
kernel.theta_0 = theta_0
if theta_1:
kernel.theta_1 = theta_1
if theta_2:
kernel.theta_2 = theta_2
if theta_3:
kernel.theta_3 = theta_3
learner.set_kernel(kernel)
learner.train(train_vects)
learner.save_model(model_fname)
pass
def test_logreg(model_fname,test_fname,output_fname=None, prob=True,acc=True):
"""
Predict labels for the test instances using the trained
model. If prob is set to True, then show class probabilities.
If acc is set to True and if the test instances have labels,
then we will predict accuracies for the test instances.
If an output_fname is specified we will write the predictions to
the file instead of writing to the terminal.
"""
pred = PREDICTOR()
pred.loadModel(model_fname)
testFile = SEQUENTIAL_FILE_READER(test_fname)
count = 0
E = EVALUATOR(pred.n)
if output_fname:
output = open(output_fname,"w")
else:
output = sys.stdout
for mv in testFile:
v = mv["vect"]
(lbl,prob) = pred.predictVect(v)
output.write("%d\t%s\n" % (lbl,str(prob)))
if pred.n == 2 and v.label == -1 :
trueLabel = 0
else:
trueLabel = v.label
if v.label is not None:
E.add(trueLabel,lbl)
count += 1
testFile.close()
if acc:
result = E.getMetrics()
E.show(result)
pass
def train_TG(
classes, train_fname, model_fname, iterations=2, L1=0, heldout_fname=None, crossValidation=None, verbose=False
):
"""
Train using binary maximum entropy model (i.e. logistic regression)
using stocastic gradient decent method. If heldout_fname is given
then we will report the accuracy on heldout data after each iteration.
If cross-validation is set to a number
(e.g. 5 for five-fold cross-validation)
then we will perform cross-validation and will report accuracy for each fold
as well as the average. You cannot specify both cross-validation and holdout
evaluation at the same time. If you do so then an error will be reported.
"""
TrainSeqFileReader = SEQUENTIAL_FILE_READER(train_fname)
trainVects = TrainSeqFileReader.read()
TrainSeqFileReader.close()
if heldout_fname:
HeldoutSeqFileReader = SEQUENTIAL_FILE_READER(heldout_fname)
heldoutVects = HeldoutSeqFileReader.read()
HeldoutSeqFileReader.close()
Learner = TruncatedGradient(classes)
Learner.total_iterations = iterations
Learner.c = L1
Learner.verbose = verbose
if crossValidation:
Learner.folds = crossValidation
if heldout_fname:
Learner.heldoutVects = heldoutVects["vects"]
no_features = classes * len(trainVects["featIDs"])
Learner.train(trainVects["vects"], no_features)
Learner.writeModel(no_features, model_fname)
pass
def train_SGD(classes,
train_fname,
model_fname,
iterations=2,
L2=0,
heldout_fname=None,
crossValidation=None,
verbose=False):
"""
Train using binary maximum entropy model (i.e. logistic regression)
using stocastic gradient decent method. If heldout_fname is given
then we will report the accuracy on heldout data after each iteration.
If cross-validation is set to a number
(e.g. 5 for five-fold cross-validation)
then we will perform cross-validation and will report accuracy for each fold
as well as the average. You cannot specify both cross-validation and holdout
evaluation at the same time. If you do so then an error will be reported.
"""
TrainSeqFileReader = SEQUENTIAL_FILE_READER(train_fname)
trainVects = TrainSeqFileReader.read()
TrainSeqFileReader.close()
heldoutVects = None
if heldout_fname:
HeldoutSeqFileReader = SEQUENTIAL_FILE_READER(heldout_fname)
heldoutVects = HeldoutSeqFileReader.read()
HeldoutSeqFileReader.close()
Learner = SGD(classes)
Learner.total_iterations = iterations
Learner.c = L2
Learner.verbose = verbose
if crossValidation:
Learner.folds = crossValidation
if heldout_fname:
Learner.heldoutVects = heldoutVects["vects"]
no_features = classes * len(trainVects["featIDs"])
Learner.train(trainVects["vects"], no_features)
print "Writing the model... %s" % model_fname
Learner.writeModel(no_features, model_fname)
pass
def test_logreg(model_fname,
test_fname,
output_fname=None,
prob=True,
acc=True):
"""
Predict labels for the test instances using the trained
model. If prob is set to True, then show class probabilities.
If acc is set to True and if the test instances have labels,
then we will predict accuracies for the test instances.
If an output_fname is specified we will write the predictions to
the file instead of writing to the terminal.
"""
pred = PREDICTOR()
pred.loadModel(model_fname)
testFile = SEQUENTIAL_FILE_READER(test_fname)
count = 0
E = EVALUATOR(pred.n)
if output_fname:
output = open(output_fname, "w")
else:
output = sys.stdout
for mv in testFile:
v = mv["vect"]
(lbl, prob) = pred.predictVect(v)
output.write("%d\t%s\n" % (lbl, str(prob)))
if pred.n == 2 and v.label == -1:
trueLabel = 0
else:
trueLabel = v.label
if v.label is not None:
E.add(trueLabel, lbl)
count += 1
testFile.close()
if acc:
result = E.getMetrics()
E.show(result)
pass
