def main(fq1, fq2, output_prefix, abundance_filename):
abundance = {}
if abundance_filename is None:
abundance = defaultdict(lambda: 1)
else:
with open(abundance_filename) as f:
for line in f:
_id, _count = line.strip().split('\t')
abundance[_id] = int(_count)
matchf = BowTieWriter(output_prefix + '.overlap.aligned')
unf1 = FastqWriter(output_prefix + '.overlap.1.unaligned')
unf2 = FastqWriter(output_prefix + '.overlap.2.unaligned')
total = 0
total_expanded = 0
aligned = 0
aligned_expanded = 0
for r1, r2 in FastqReaderPaired(fq1, fq2):
realid = r1['ID'][:r1['ID'].find('/')]
total += 1
total_expanded += abundance[realid]
if find_overlap(r1, r2, matchf, unf1, unf2): #overlap found
aligned += 1
aligned_expanded += abundance[realid]
with open(output_prefix + '.overlap.log', 'w') as f:
p = aligned * 100. / total
f.write("# reads processed: {0}\n".format(total))
f.write(
"# reads with at least one reported alignment: {0} ({1:.2f}%)\n".
format(aligned, p))
f.write("# reads that failed to align: {0} ({1:.2f}%)\n".format(
total - aligned, 100 - p))
f.write("Reported {0} paired-end alignments to 1 output stream(s)\n".
format(aligned))
with open(output_prefix + '.overlap.log_expanded', 'w') as f:
p = aligned_expanded * 100. / total_expanded
f.write("# reads processed: {0}\n".format(total_expanded))
f.write(
"# reads with at least one reported alignment: {0} ({1:.2f}%)\n".
format(aligned_expanded, p))
f.write("# reads that failed to align: {0} ({1:.2f}%)\n".format(
total_expanded - aligned_expanded, 100 - p))
f.write("Reported {0} paired-end alignments to 1 output stream(s)\n".
format(aligned_expanded))
matchf.close()
unf1.close()
unf2.close()
def bowtie2fastq(input, revcomp=False):
output = input + '.fq'
f = FastqWriter(output)
for r in BowTieReader(input, False):
if revcomp:
r['seq'] = Seq(r['seq']).reverse_complement().tostring()
r['qual'] = r['qual'][::-1]
f.write(r)
f.close()
def main(fq1, fq2, output_prefix, abundance_filename):
abundance = {}
if abundance_filename is None:
abundance = defaultdict(lambda: 1)
else:
with open(abundance_filename) as f:
for line in f:
_id, _count = line.strip().split('\t')
abundance[_id] = int(_count)
matchf = BowTieWriter(output_prefix + '.overlap.aligned')
unf1 = FastqWriter(output_prefix + '.overlap.1.unaligned')
unf2 = FastqWriter(output_prefix + '.overlap.2.unaligned')
total = 0
total_expanded = 0
aligned = 0
aligned_expanded = 0
for r1, r2 in FastqReaderPaired(fq1, fq2):
realid = r1['ID'][:r1['ID'].find('/')]
total += 1
total_expanded += abundance[realid]
if find_overlap(r1, r2, matchf, unf1, unf2): #overlap found
aligned += 1
aligned_expanded += abundance[realid]
with open(output_prefix + '.overlap.log', 'w') as f:
p = aligned*100./total
f.write("# reads processed: {0}\n".format(total))
f.write("# reads with at least one reported alignment: {0} ({1:.2f}%)\n".format(aligned,p))
f.write("# reads that failed to align: {0} ({1:.2f}%)\n".format(total-aligned,100-p))
f.write("Reported {0} paired-end alignments to 1 output stream(s)\n".format(aligned))
with open(output_prefix + '.overlap.log_expanded', 'w') as f:
p = aligned_expanded*100./total_expanded
f.write("# reads processed: {0}\n".format(total_expanded))
f.write("# reads with at least one reported alignment: {0} ({1:.2f}%)\n".format(aligned_expanded,p))
f.write("# reads that failed to align: {0} ({1:.2f}%)\n".format(total_expanded-aligned_expanded,100-p))
f.write("Reported {0} paired-end alignments to 1 output stream(s)\n".format(aligned_expanded))
matchf.close()
unf1.close()
unf2.close()
def detect_primers_PE(input1, input2, output_prefix, f_primer, r_primer, min_match_len, max_mm, max_de, max_in):
"""
NOTE: this is for paired end reads that comes in two separate files
ex: DS19342_CTTGTA_L006_R1_001.fastq.gz and DS19342_CTTGTA_L006_R2_001.fastq.gz
Given a pair of reads from input1, input2:
1. Detect that F primer exists in one read and R primer in the other
2. If both reads pass primer detection, output
3. Otherwise, discard
Output: <output_prefix>.{F|R}primer_good
<output_prefix>.primer.bad
<output_prefix>.primer.log
"""
def process_primer(r, match_len, is_reverse):
# get record into miscBowTie.BowTieReader format
# strip away primers from seq & qual, properly rev comp!
r['offset'] = match_len
r['seq'] = r['seq'][match_len:]
r['qual'] = r['qual'][match_len:]
r['ref'] = 'NA'
if is_reverse:
r['seq'] = Seq(r['seq']).reverse_complement().tostring()
r['qual'] = r['qual'][::-1]
os.system("rm {0}.*primer_*".format(output_prefix))
Fgood = BowTieWriter(output_prefix + '.Fprimer_good')
Rgood = BowTieWriter(output_prefix + '.Rprimer_good')
hbad1 = FastqWriter(output_prefix + '.primer_bad.1')
hbad2 = FastqWriter(output_prefix + '.primer_bad.2')
hverbose = open(output_prefix + '.primer.verbose', 'w')
hlog = open(output_prefix + '.primer.log', 'w')
start_t = time.time()
good, bad = 0,0
pmF = PrimerMatch(f_primer)
pmR = PrimerMatch(r_primer)
for r1, r2 in itertools.izip(FastqReader(input1), FastqReader(input2)):
# NOTE: in the case of PE reads
# regardless of whether we're matching for F or R primer
# they would all appear at the 5' end of the read
# which is why we call match_primer_len with is_reverse = False
match_f_len1, mmf1 = match_primer_len(r1['seq'], f_primer, max_mm, min_match_len, False)
match_r_len1, mmr1 = match_primer_len(r1['seq'], r_primer, max_mm, min_match_len, False)
match_f_len2, mmf2 = match_primer_len(r2['seq'], f_primer, max_mm, min_match_len, False)
match_r_len2, mmr2 = match_primer_len(r2['seq'], r_primer, max_mm, min_match_len, False)
#match_f_len1 = match_f_len2 =match_r_len1=match_r_len2=0
if match_f_len1 > 0 and match_r_len2 > 0:
# case 1, read 1 is F, read 2 is R
good += 1
process_primer(r1, match_f_len1, False)
Fgood.write(r1)
process_primer(r2, match_r_len2, False)
Rgood.write(r2)
elif match_f_len2 > 0 and match_r_len1 > 0:
# case 2, read 1 is R, case 2 is F
good += 1
process_primer(r2, match_f_len2, False)
Fgood.write(r2)
process_primer(r1, match_r_len1, False)
Rgood.write(r1)
else:
pmF.make_suffix(r1['seq'])
pmF.match(min_match_len, max_mm, max_in, max_de)
if pmF.match_result is not None:
pmR.make_suffix(r2['seq'])
pmR.match(min_match_len, max_mm, max_in, max_de)
if pmR.match_result is not None: # case 1, read 1 is F, read 2 is R
good += 1
process_primer(r1, pmF.match_result.match_len, False)
Fgood.write(r1)
hverbose.write("{0}\t{1}\t{2}\n".format(r1['ID'], pmF.match_result.match_len, pmF.match_result.miss))
process_primer(r2, pmR.match_result.match_len, False)
Rgood.write(r2)
hverbose.write("{0}\t{1}\t{2}\n".format(r2['ID'], pmR.match_result.match_len, pmR.match_result.miss))
else:
hbad1.write(r1)
hbad2.write(r2)
bad += 1
else:
pmR.make_suffix(r1['seq'])
pmR.match(min_match_len, max_mm, max_in, max_de)
if pmR.match_result is not None:
pmF.make_suffix(r2['seq'])
pmF.match(min_match_len, max_mm, max_in, max_de)
if pmF.match_result is not None:
good += 1
# case 2, read 1 is R, read 2 is F
process_primer(r2, pmF.match_result.match_len, False)
hverbose.write("{0}\t{1}\t{2}\n".format(r2['ID'], pmF.match_result.match_len, pmF.match_result.miss))
Fgood.write(r2)
process_primer(r1, pmR.match_result.match_len, False)
Rgood.write(r1)
hverbose.write("{0}\t{1}\t{2}\n".format(r1['ID'], pmR.match_result.match_len, pmR.match_result.miss))
else:
# case 3: unresolved, bad read pair
hbad1.write(r1)
hbad2.write(r2)
bad += 1
hlog.write("Input 1: {0}\nInput 2: {1}\n".format(input1, input2))
hlog.write("F primer: {0}\nR primer: {1}\n".format(f_primer, r_primer))
hlog.write("Min match len: {0}\n".format(min_match_len))
hlog.write("Max mismatch: {0}\n".format(max_mm))
hlog.write("Max deletion: {0}\n".format(max_de))
hlog.write("Max insertion: {0}\n".format(max_in))
hlog.write("Primer detection and removal took {0} sec.\n".format(time.time()-start_t))
hlog.write("# of original reads: {0}\n".format(good+bad))
hlog.write("# of reads removed: {0} ({1:.2f})\n".format(bad,bad*1./(good+bad)))
hlog.write("# of reads remaining: {0} ({1:.2f})\n".format(good,good*1./(good+bad)))
Fgood.close()
Rgood.close()
hbad1.close()
hbad2.close()
hlog.close()
hverbose.close()
os.system("gzip " + Fgood.f.name)
os.system("gzip " + Rgood.f.name)
os.system("gzip " + hbad1.f.name)
os.system("gzip " + hbad2.f.name)
os.system("gzip " + hverbose.name)
