def get_device_channel(serial_number, channel):
try:
"""
* Allocate a new Phidget Channel object
"""
ch = VoltageOutput()
"""
* Set matching parameters to specify which channel to open
"""
#You may remove this line and hard-code the addressing parameters to fit your application
ch.setDeviceSerialNumber(serial_number)
ch.setIsHubPortDevice(False)
ch.setChannel(channel)
"""
* Add event handlers before calling open so that no events are missed.
"""
print("\n--------------------------------------")
print("\nSetting OnAttachHandler...")
ch.setOnAttachHandler(onAttachHandler)
print("Setting OnDetachHandler...")
ch.setOnDetachHandler(onDetachHandler)
print("Setting OnErrorHandler...")
ch.setOnErrorHandler(onErrorHandler)
"""
* Open the channel with a timeout
"""
print("\nOpening and Waiting for Attachment...")
try:
ch.openWaitForAttachment(5000)
except PhidgetException as e:
PrintOpenErrorMessage(e, ch)
raise EndProgramSignal("Program Terminated: Open Failed")
# ch.setVoltage(voltage)
'''
* Perform clean up and exit
'''
return ch
except:
pass
class PneumaticFrame2:
def __init__(self, master, initial_name, top_name, color, sol, reg_pwr,
reg_set, reg_get, PSI):
self.frame = Frame(master, borderwidth=2, relief=SUNKEN, bg=color)
self.frame.pack()
self.master = master
self.frame_name = StringVar()
self.frame_name.set(initial_name)
self.state = 0
self.fontType = "Comic Sans"
self.activeColor = 'SpringGreen4'
self.frameColor = color
self.pressure = IntVar()
self.lock_flag = IntVar()
self.pressure.set("")
self.power = Button(self.frame,
text="PWR",
activebackground=self.activeColor,
command=lambda: self.toggle_pwr())
self.set_label = Button(self.frame,
text="SET LABEL",
font=(self.fontType, 7),
command=lambda: self.get_label_input())
self.observed_pressure = Entry(self.frame,
width=5,
state="readonly",
textvariable=self.pressure)
if self.frame_name.get() == "Hydro":
self.set_pressure_scale = Scale(self.frame,
orient=HORIZONTAL,
from_=0,
to=92,
resolution=0.5,
bg=color,
label="Set Pressure (PSI)",
highlightthickness=0,
command=self.set_pressure)
else:
self.set_pressure_scale = Scale(self.frame,
orient=HORIZONTAL,
from_=0,
to=50,
resolution=0.5,
bg=color,
label="Set Pressure (PSI)",
highlightthickness=0,
command=self.set_pressure)
self.custom_label = Label(self.frame,
textvariable=self.frame_name,
font=(self.fontType, 14),
bg=color)
self.label = Label(self.frame, text=initial_name, bg=color)
self.lock = Checkbutton(self.frame,
text="LOCK",
bg=color,
variable=self.lock_flag,
command=self.lock)
self.frame_name.set(top_name)
# Init the pressure scale to the default value.
self.set_pressure_scale.set(PSI)
# Lock hydo at startup
if initial_name == "Hydro":
self.lock.select()
self.set_pressure_scale.config(state="disabled")
self.power.config(state="disable")
self.frame.rowconfigure(0, minsize=30)
self.custom_label.grid(row=0, column=0, columnspan=2, sticky=S)
self.set_label.grid(column=0, row=1, columnspan=2)
self.frame.rowconfigure(2, minsize=50)
self.power.grid(column=0, row=2)
self.observed_pressure.grid(column=1, row=2)
self.set_pressure_scale.grid(column=0, row=3, columnspan=2, padx=20)
self.frame.rowconfigure(4, minsize=5)
self.label.grid(column=0, row=5)
self.lock.grid(column=1, row=5)
# Connect to Phidget Solid State Relay for solinoid control
if self.frame_name.get() == "Hydro":
self.solenoid_switch = DigitalOutput()
self.solenoid_switch.setDeviceSerialNumber(sol[0])
self.solenoid_switch.setIsHubPortDevice(False)
self.solenoid_switch.setHubPort(sol[1])
self.solenoid_switch.setChannel(sol[2])
self.solenoid_switch.openWaitForAttachment(5000)
#Connect to Phidget Solid State Relay for regulator power control
self.reg_switch = DigitalOutput()
self.reg_switch.setDeviceSerialNumber(reg_pwr[0])
self.reg_switch.setIsHubPortDevice(False)
self.reg_switch.setHubPort(reg_pwr[1])
self.reg_switch.setChannel(reg_pwr[2])
self.reg_switch.openWaitForAttachment(5000)
#Connect to Phidget Voltage Ouptut for pressure control
self.pressure_ctrl = VoltageOutput()
self.pressure_ctrl.setDeviceSerialNumber(reg_set[0])
self.pressure_ctrl.setIsHubPortDevice(False)
self.pressure_ctrl.setHubPort(reg_set[1])
self.pressure_ctrl.setChannel(reg_set[2])
self.pressure_ctrl.openWaitForAttachment(5000)
#Connect to Phidget Analog Input for pressure reading
self.pressure_reading = VoltageRatioInput()
self.pressure_reading.setDeviceSerialNumber(reg_get[0])
#One of the VINT Hubs on the SBC is used and needs special configuration
if reg_get[0] == SBCH:
self.pressure_reading.setIsHubPortDevice(True)
self.pressure_reading.setHubPort(0)
self.pressure_reading.setChannel(reg_get[1])
self.pressure_reading.openWaitForAttachment(5000)
def toggle_pwr(self):
#Turn on air channel
if self.state == 0:
#Turn on power to regulator and show active button color
self.power.config(bg=self.activeColor)
self.reg_switch.setState(True)
if self.frame_name.get() == "Hydro":
self.solenoid_switch.setState(True)
#Start monitoring air pressure
self.update_pressure()
#Change state of air channel
self.state = 1
#Turn off air channel
elif self.state == 1:
remember_state = self.set_pressure_scale.get()
if self.frame_name.get() != "Hydro":
messagebox.showinfo(
self.frame_name.get() + " Warning",
"Pressure will be set to zero. Acknowledge that " +
self.frame_name.get() + " is in a safe configuration")
# Change pressure to zero
self.set_pressure_scale.set(0)
self.set_pressure(0)
time.sleep(0.5)
self.frame.update()
self.reg_switch.setState(False)
time.sleep(0.5)
self.set_pressure_scale.set(remember_state)
if self.frame_name.get() == "Hydro":
self.solenoid_switch.setState(False)
self.lock.select()
self.set_pressure_scale.config(state="disabled")
self.power.config(state="disable")
#Turn off power to reguluator and remove active button color
self.power.config(bg="SystemButtonFace")
#Update air channel state
self.state = 0
def get_label_input(self):
self.window = popupWindow(self.master)
self.set_label.config(state=DISABLED)
self.master.wait_window(self.window.top)
self.set_label.config(state=NORMAL)
#If the user does not enter a value exception will be produced
try:
if len(self.window.value) > 12:
self.frame_name.set("SET ERROR")
else:
self.frame_name.set(self.window.value)
except:
self.frame_name.set("SET ERROR")
def set_pressure(self, val):
# Pressure Range
range = MAXPR - MINPR
# Calculate volts/PSI
ratio = 5 / range
self.pressure_ctrl.setVoltage(float(val) * ratio)
def update_pressure(self):
if self.reg_switch.getState():
try:
val = float(self.pressure_reading.getSensorValue())
PSI = val * 165.63 - 30.855
PSI = round(PSI, 2)
self.pressure.set(PSI)
#Low pressure check
if PSI < (self.set_pressure_scale.get() - 3):
if self.frame.cget('bg') == "Red":
self.frame.config(bg=self.frameColor)
self.set_pressure_scale.config(bg=self.frameColor)
self.custom_label.config(bg=self.frameColor)
self.label.config(bg=self.frameColor)
self.lock.config(bg=self.frameColor)
else:
self.frame.config(bg='Red')
self.set_pressure_scale.config(bg="Red")
self.custom_label.config(bg="Red")
self.label.config(bg="Red")
self.lock.config(bg="Red")
if PSI > (self.set_pressure_scale.get() - 3):
if self.frame.cget('bg') == "Red":
self.frame.config(bg=self.frameColor)
self.set_pressure_scale.config(bg=self.frameColor)
self.custom_label.config(bg=self.frameColor)
self.label.config(bg=self.frameColor)
self.lock.config(bg=self.frameColor)
except:
print("Init Air Pressure")
root.after(200, self.update_pressure)
else:
self.pressure.set("")
def lock(self):
if self.lock_flag.get() == True:
self.set_pressure_scale.config(state="disabled")
self.power.config(state="disable")
elif self.lock_flag.get() == False:
self.set_pressure_scale.config(state="normal")
self.power.config(state="normal")
class ControlFrame:
def __init__(self, master, colorArray):
frame1 = Frame(master, borderwidth=2, relief=SUNKEN)
frame2 = Frame(master, borderwidth=2, relief=SUNKEN)
frame3 = Frame(master, borderwidth=2, relief=SUNKEN)
frame4 = Frame(master, borderwidth=2, relief=SUNKEN)
frame5 = Frame(master, borderwidth=2, relief=SUNKEN)
frame6 = Frame(master, borderwidth=2, relief=SUNKEN)
frame7 = Frame(master, borderwidth=2, relief=SUNKEN)
camera_frame = Frame(master, borderwidth=2, relief=SUNKEN)
frame1.grid(row=1, column=0)
frame2.grid(row=1, column=1)
frame3.grid(row=1, column=2)
frame4.grid(row=1, column=3)
frame5.grid(row=1, column=4)
frame6.grid(row=1, column=5)
frame7.grid(row=1, column=6)
camera_frame.grid(row=3, column=0, columnspan=7, sticky=W)
self.out1 = AxisFrame(frame1, "BASE CIRC", "VESSEL RIGHT",
"VESSEL LEFT", HUB1, 5, colorArray[0], 3.3, 0.55)
self.out2 = AxisFrame(frame2, "BASE AUX", "CW/IN", "CCW/OUT", HUB2, 0,
colorArray[1], 2.2, 0.11)
self.out3 = AxisFrame(frame3, "VARD ROT", "CW", "CCW", HUB1, 3,
colorArray[2], 2.2, 0.15)
self.out4 = AxisFrame(frame4, "VARD VERT", "UP", "DOWN", HUB1, 4,
colorArray[3], 7.8, 0.54)
self.out5 = AxisFrame(frame5, "DA MAST", "UP", "DOWN", HUB1, 0,
colorArray[4], 8, 0.86)
self.out6 = AxisFrame(frame6, "DA PAN", "CW", "CCW", HUB1, 2,
colorArray[5], 3.0, 0.30)
self.out7 = AxisFrame(frame7, "DA TILT", "UP", "DOWN", HUB1, 1,
colorArray[6], 3.6, 0.57)
#RJ Camera Control Code
self.invert_tilt = BooleanVar()
self.invert_pan = BooleanVar()
self.btn_power = Button(camera_frame,
text="PWR",
font="Courier, 12",
command=self.toggle_power)
self.btn_near = Button(camera_frame,
text="NEAR",
font="Courier, 12",
width=7)
self.btn_far = Button(camera_frame,
text="FAR",
font="Courier, 12",
width=7)
self.btn_wide = Button(camera_frame,
text="WIDE",
font="Courier, 12",
width=7)
self.btn_tele = Button(camera_frame,
text="TELE",
font="Courier, 12",
width=7)
self.btn_ms = Button(camera_frame,
text="MS",
font="Courier, 12",
width=7)
self.left_light_scale = Scale(camera_frame,
orient=VERTICAL,
from_=0,
to=0.45,
resolution=0.01,
command=self.update_left_intensity)
self.right_light_scale = Scale(camera_frame,
orient=VERTICAL,
from_=0,
to=0.45,
resolution=0.01,
command=self.update_right_intensity)
self.label_lights = Label(camera_frame, text=" Light Intensity")
self.btn_tilt_up = Button(camera_frame,
text="TILT UP",
font="Courier, 12",
width=10)
self.btn_tilt_down = Button(camera_frame,
text="TILT DOWN",
font="Courier, 12",
width=10)
self.btn_pan_right = Button(camera_frame,
text="PAN RIGHT",
font="Courier, 12",
width=10)
self.btn_pan_left = Button(camera_frame,
text="PAN LEFT",
font="Courier, 12",
width=10)
self.tilt_speed = Scale(camera_frame,
orient=HORIZONTAL,
from_=0.01,
to=.5,
resolution=0.01)
self.pan_speed = Scale(camera_frame,
orient=HORIZONTAL,
from_=0.01,
to=.5,
resolution=0.01)
self.ckbx_invert_tilt = Checkbutton(camera_frame,
text="Invert Tilt",
variable=self.invert_tilt)
self.ckbx_invert_pan = Checkbutton(camera_frame,
text="Invert Pan",
variable=self.invert_pan)
self.activeColor = 'SpringGreen4'
self.tilt_speed.set(0.15)
self.pan_speed.set(0.15)
self.btn_power.grid(row=0, column=0, padx=60)
self.btn_ms.grid(row=1, column=0, padx=5, pady=5)
self.btn_near.grid(row=0, column=2, padx=20, pady=10)
self.btn_far.grid(row=1, column=2, padx=20, pady=10)
self.btn_tele.grid(row=0, column=3, padx=20, pady=10)
self.btn_wide.grid(row=1, column=3, padx=20, pady=10)
self.left_light_scale.grid(row=0, column=4, rowspan=3, padx=20, pady=5)
self.right_light_scale.grid(row=0,
column=5,
rowspan=3,
padx=45,
pady=5)
self.label_lights.grid(row=3,
column=4,
columnspan=2,
padx=45,
sticky=N)
self.btn_tilt_up.grid(row=0, column=6, padx=20, pady=5)
self.btn_tilt_down.grid(row=1, column=6, padx=20, pady=5)
self.btn_pan_right.grid(row=0, column=8, padx=20, pady=5, rowspan=2)
self.btn_pan_left.grid(row=0, column=7, padx=20, pady=5, rowspan=2)
self.tilt_speed.grid(row=2, column=6)
self.pan_speed.grid(row=2, column=7, columnspan=2)
self.ckbx_invert_tilt.grid(row=3, column=6)
self.ckbx_invert_pan.grid(row=3, column=7, columnspan=2)
#Connect to Phidget Devices
self.power = DigitalOutput()
self.power.setDeviceSerialNumber(HUB2)
self.power.setIsHubPortDevice(False)
self.power.setHubPort(1)
self.power.setChannel(0)
self.power.openWaitForAttachment(5000)
self.manual_select = DigitalOutput()
self.manual_select.setDeviceSerialNumber(HUB2)
self.manual_select.setIsHubPortDevice(False)
self.manual_select.setHubPort(1)
self.manual_select.setChannel(1)
self.manual_select.openWaitForAttachment(5000)
self.near = DigitalOutput()
self.near.setDeviceSerialNumber(HUB2)
self.near.setIsHubPortDevice(False)
self.near.setHubPort(1)
self.near.setChannel(2)
self.near.openWaitForAttachment(5000)
self.far = DigitalOutput()
self.far.setDeviceSerialNumber(HUB2)
self.far.setIsHubPortDevice(False)
self.far.setHubPort(1)
self.far.setChannel(3)
self.far.openWaitForAttachment(5000)
self.wide = DigitalOutput()
self.wide.setDeviceSerialNumber(HUB2)
self.wide.setIsHubPortDevice(False)
self.wide.setHubPort(1)
self.wide.setChannel(4)
self.wide.openWaitForAttachment(5000)
self.tele = DigitalOutput()
self.tele.setDeviceSerialNumber(HUB2)
self.tele.setIsHubPortDevice(False)
self.tele.setHubPort(1)
self.tele.setChannel(5)
self.tele.openWaitForAttachment(5000)
self.left_light = VoltageOutput()
self.left_light.setDeviceSerialNumber(HUB2)
self.left_light.setIsHubPortDevice(False)
self.left_light.setHubPort(2)
self.left_light.setChannel(0)
self.left_light.openWaitForAttachment(5000)
self.right_light = VoltageOutput()
self.right_light.setDeviceSerialNumber(HUB2)
self.right_light.setIsHubPortDevice(False)
self.right_light.setHubPort(3)
self.right_light.setChannel(0)
self.right_light.openWaitForAttachment(5000)
self.pan = VoltageOutput()
self.pan.setDeviceSerialNumber(HUB2)
self.pan.setIsHubPortDevice(False)
self.pan.setHubPort(5)
self.pan.setChannel(0)
self.pan.openWaitForAttachment(5000)
self.tilt = VoltageOutput()
self.tilt.setDeviceSerialNumber(HUB2)
self.tilt.setIsHubPortDevice(False)
self.tilt.setHubPort(4)
self.tilt.setChannel(0)
self.tilt.openWaitForAttachment(5000)
self.btn_near.bind('<ButtonPress-1>', lambda event: self.focus("+"))
self.btn_near.bind('<ButtonRelease-1>', lambda event: self.focus("0"))
self.btn_far.bind('<ButtonPress-1>', lambda event: self.focus("-"))
self.btn_far.bind('<ButtonRelease-1>', lambda event: self.focus("0"))
self.btn_wide.bind('<ButtonPress-1>', lambda event: self.zoom("-"))
self.btn_wide.bind('<ButtonRelease-1>', lambda event: self.zoom("0"))
self.btn_tele.bind('<ButtonPress-1>', lambda event: self.zoom("+"))
self.btn_tele.bind('<ButtonRelease-1>', lambda event: self.zoom("0"))
self.btn_ms.bind('<ButtonPress-1>',
lambda event: self.focus_type("ON"))
self.btn_ms.bind('<ButtonRelease-1>',
lambda event: self.focus_type("OFF"))
self.btn_tilt_up.bind('<ButtonPress-1>',
lambda event: self.tilt_move("-"))
self.btn_tilt_up.bind('<ButtonRelease-1>',
lambda event: self.tilt_move("0"))
self.btn_tilt_down.bind('<ButtonPress-1>',
lambda event: self.tilt_move("+"))
self.btn_tilt_down.bind('<ButtonRelease-1>',
lambda event: self.tilt_move("0"))
self.btn_pan_right.bind('<ButtonPress-1>',
lambda event: self.pan_move("R"))
self.btn_pan_right.bind('<ButtonRelease-1>',
lambda event: self.pan_move("0"))
self.btn_pan_left.bind('<ButtonPress-1>',
lambda event: self.pan_move("L"))
self.btn_pan_left.bind('<ButtonRelease-1>',
lambda event: self.pan_move("0"))
def toggle_power(self):
if self.power.getState() == True:
self.power.setState(False)
self.btn_power.config(bg="SystemButtonFace")
elif self.power.getState() == False:
self.power.setState(True)
self.btn_power.config(bg=self.activeColor)
def update_left_intensity(self, val):
self.left_light.setVoltage(float(val))
def update_right_intensity(self, val):
self.right_light.setVoltage(float(val))
def focus(self, direction):
if direction == "+":
self.near.setState(TRUE)
elif direction == "-":
self.far.setState(TRUE)
elif direction == "0":
self.far.setState(FALSE)
self.near.setState(FALSE)
def zoom(self, direction):
if direction == "+":
self.tele.setState(TRUE)
elif direction == "-":
self.wide.setState(TRUE)
elif direction == "0":
self.tele.setState(FALSE)
self.wide.setState(FALSE)
def pan_move(self, direction):
voltage = float(self.pan_speed.get())
if self.invert_pan.get():
voltage *= -1
if direction == "R":
self.pan.setVoltage(voltage)
elif direction == "L":
self.pan.setVoltage(-1 * voltage)
elif direction == "0":
self.pan.setVoltage(0)
def tilt_move(self, direction):
voltage = float(self.tilt_speed.get())
if self.invert_tilt.get():
voltage *= -1
if direction == "+":
self.tilt.setVoltage(voltage)
elif direction == "-":
self.tilt.setVoltage(-1 * voltage)
elif direction == "0":
self.tilt.setVoltage(0)
def focus_type(self, state):
if state == "ON":
self.manual_select.setState(True)
elif state == "OFF":
self.manual_select.setState(False)
#Setup pan and tilt motors tilt = DCMotor() tilt.setDeviceSerialNumber(465371) tilt.openWaitForAttachment(1000) tilt.setAcceleration(ACCEL) pan = DCMotor() pan.setDeviceSerialNumber(469502) pan.openWaitForAttachment(1000) pan.setAcceleration(ACCEL) #Setup Pnematics pressure_ctrl = VoltageOutput() pressure_ctrl.setDeviceSerialNumber(540047) pressure_ctrl.setIsHubPortDevice(False) pressure_ctrl.setHubPort(3) pressure_ctrl.setChannel(0) pressure_ctrl.openWaitForAttachment(5000) pressure_reading = VoltageRatioInput() pressure_reading.setDeviceSerialNumber(540047) pressure_reading.setIsHubPortDevice(False) pressure_reading.setHubPort(0) pressure_reading.setChannel(0) pressure_reading.openWaitForAttachment(5000) solenoid = DigitalOutput() solenoid.setDeviceSerialNumber(540047) solenoid.setIsHubPortDevice(False) solenoid.setHubPort(4)
class ControlFrame:
def __init__(self, master, colorArray):
frame1 = Frame(master, borderwidth=2, relief=SUNKEN)
frame2 = Frame(master, borderwidth=2, relief=SUNKEN)
frame3 = Frame(master, borderwidth=2, relief=SUNKEN)
frame4 = Frame(master, borderwidth=2, relief=SUNKEN)
frame5 = Frame(master, borderwidth=2, relief=SUNKEN)
frame6 = Frame(master, borderwidth=2, relief=SUNKEN)
frame7 = Frame(master, borderwidth=2, relief=SUNKEN)
camera_frame_1 = Frame(master, borderwidth=2, relief=SUNKEN, bg='LightSkyBlue2')
camera_frame_2 = Frame(master, borderwidth=2, relief=SUNKEN, bg='light goldenrod yellow')
frame1.grid(row=1, column=0)
frame2.grid(row=1, column=1)
frame3.grid(row=1, column=2)
frame4.grid(row=1, column=3)
frame5.grid(row=1, column=4)
frame6.grid(row=1, column=5)
frame7.grid(row=1, column=6)
camera_frame_1.grid(row=3, column=0, columnspan=7, sticky=NSEW)
camera_frame_2.grid(row=4, column=0, columnspan=7, sticky=NSEW)
self.out1 = AxisFrame(frame1, "BASE CIRC", "VESSEL RIGHT", "VESSEL LEFT", HUB1, 5, colorArray[0], 3.3, 0.55)
self.out2 = AxisFrame(frame2, "BASE AUX", "CW/IN", "CCW/OUT", HUB2, 0, colorArray[1], 2.2, 0.11)
self.out3 = AxisFrame(frame3, "VARD ROT", "CW", "CCW", HUB1, 3, colorArray[2], 2.2, 0.15)
self.out4 = AxisFrame(frame4, "VARD VERT", "UP", "DOWN", HUB1, 4, colorArray[3], 7.8, 0.54)
self.out5 = AxisFrame(frame5, "DA MAST", "UP", "DOWN", HUB1, 0, colorArray[4], 8, 0.86)
self.out6 = AxisFrame(frame6, "DA PAN", "CW", "CCW", HUB1, 2, colorArray[5], 3.0, 0.30)
self.out7 = AxisFrame(frame7, "DA TILT", "UP", "DOWN", HUB1, 1, colorArray[6], 3.6, 0.57)
# RJ Camera Control: Code Tool Camera
self.invert_tilt_1 = BooleanVar()
self.invert_pan_1 = BooleanVar()
self.btn_power_1 = Button(camera_frame_1, text="PWR", font="Courier, 12", command=self.toggle_power_1)
self.btn_near_1 = Button(camera_frame_1, text="NEAR", font="Courier, 12", width=7)
self.btn_far_1 = Button(camera_frame_1, text="FAR", font="Courier, 12", width=7)
self.btn_wide_1 = Button(camera_frame_1, text="WIDE", font="Courier, 12", width=7)
self.btn_tele_1 = Button(camera_frame_1, text="TELE", font="Courier, 12", width=7)
self.btn_ms_1 = Button(camera_frame_1, text="MS", font="Courier, 12", width=7)
self.left_light_scale_1 = Scale(camera_frame_1, orient=VERTICAL, from_=0, to=0.45, resolution=0.01,
command=self.update_left_intensity_1, bg='LightSkyBlue2', highlightthickness=0)
self.right_light_scale_1 = Scale(camera_frame_1, orient=VERTICAL, from_=0, to=0.45, resolution=0.01,
command=self.update_right_intensity_1, bg='LightSkyBlue2',
highlightthickness=0)
self.label_lights_1 = Label(camera_frame_1, text=" Light Intensity", bg='LightSkyBlue2')
self.label_camera_type_1 = Label(camera_frame_1, text="TOOL CAMERA", font=("TkDefaultFont", 14),
bg='LightSkyBlue2')
self.btn_tilt_up_1 = Button(camera_frame_1, text="TILT UP", font="Courier, 12", width=10)
self.btn_tilt_down_1 = Button(camera_frame_1, text="TILT DOWN", font="Courier, 12", width=10)
self.btn_pan_right_1 = Button(camera_frame_1, text="PAN RIGHT", font="Courier, 12", width=10)
self.btn_pan_left_1 = Button(camera_frame_1, text="PAN LEFT", font="Courier, 12", width=10)
self.tilt_speed_1 = Scale(camera_frame_1, orient=HORIZONTAL, from_=0.01, to=.5, resolution=0.01,
bg='LightSkyBlue2', highlightthickness=0)
self.pan_speed_1 = Scale(camera_frame_1, orient=HORIZONTAL, from_=0.01, to=.5, resolution=0.01,
bg='LightSkyBlue2', highlightthickness=0)
self.ckbx_invert_tilt_1 = Checkbutton(camera_frame_1, text="Invert Tilt", variable=self.invert_tilt_1,
bg='LightSkyBlue2')
self.ckbx_invert_pan_1 = Checkbutton(camera_frame_1, text="Invert Pan", variable=self.invert_pan_1,
bg='LightSkyBlue2')
self.activeColor_1 = 'SpringGreen4'
self.tilt_speed_1.set(0.15)
self.pan_speed_1.set(0.15)
# RJ Camera Control: Overview Camera
self.invert_tilt_2 = BooleanVar()
self.invert_pan_2 = BooleanVar()
self.btn_power_2 = Button(camera_frame_2, text="PWR", font="Courier, 12", command=self.toggle_power_2)
self.btn_near_2 = Button(camera_frame_2, text="NEAR", font="Courier, 12", width=7)
self.btn_far_2 = Button(camera_frame_2, text="FAR", font="Courier, 12", width=7)
self.btn_wide_2 = Button(camera_frame_2, text="WIDE", font="Courier, 12", width=7)
self.btn_tele_2 = Button(camera_frame_2, text="TELE", font="Courier, 12", width=7)
self.btn_ms_2 = Button(camera_frame_2, text="MS", font="Courier, 12", width=7)
self.left_light_scale_2 = Scale(camera_frame_2, orient=VERTICAL, from_=0, to=0.45, resolution=0.01,
command=self.update_left_intensity_2, bg='light goldenrod yellow',
highlightthickness=0)
self.right_light_scale_2 = Scale(camera_frame_2, orient=VERTICAL, from_=0, to=0.45, resolution=0.01,
command=self.update_right_intensity_2, bg='light goldenrod yellow',
highlightthickness=0)
self.label_lights_2 = Label(camera_frame_2, text=" Light Intensity", bg='light goldenrod yellow')
self.label_camera_type_2 = Label(camera_frame_2, text="OVERVIEW CAMERA", font=("TkDefaultFont", 14),
bg='light goldenrod yellow')
self.btn_tilt_up_2 = Button(camera_frame_2, text="TILT UP", font="Courier, 12", width=10)
self.btn_tilt_down_2 = Button(camera_frame_2, text="TILT DOWN", font="Courier, 12", width=10)
self.btn_pan_right_2 = Button(camera_frame_2, text="PAN RIGHT", font="Courier, 12", width=10)
self.btn_pan_left_2 = Button(camera_frame_2, text="PAN LEFT", font="Courier, 12", width=10)
self.tilt_speed_2 = Scale(camera_frame_2, orient=HORIZONTAL, from_=0.01, to=.5, resolution=0.01,
bg='light goldenrod yellow', highlightthickness=0)
self.pan_speed_2 = Scale(camera_frame_2, orient=HORIZONTAL, from_=0.01, to=.5, resolution=0.01,
bg='light goldenrod yellow', highlightthickness=0)
self.ckbx_invert_tilt_2 = Checkbutton(camera_frame_2, text="Invert Tilt", variable=self.invert_tilt_2,
bg='light goldenrod yellow')
self.ckbx_invert_pan_2 = Checkbutton(camera_frame_2, text="Invert Pan", variable=self.invert_pan_2,
bg='light goldenrod yellow')
self.activeColor_2 = 'SpringGreen4'
self.tilt_speed_2.set(0.15)
self.pan_speed_2.set(0.15)
# Grid the Tool Camera Controls
self.btn_power_1.grid(row=0, column=0, padx=60)
self.btn_ms_1.grid(row=1, column=0, padx=5, pady=5)
self.btn_near_1.grid(row=0, column=2, padx=20, pady=10)
self.btn_far_1.grid(row=1, column=2, padx=20, pady=10)
self.btn_tele_1.grid(row=0, column=3, padx=20, pady=10)
self.btn_wide_1.grid(row=1, column=3, padx=20, pady=10)
self.label_camera_type_1.grid(row=2, column=0, columnspan=4)
self.left_light_scale_1.grid(row=0, column=4, rowspan=3, padx=20, pady=5)
self.right_light_scale_1.grid(row=0, column=5, rowspan=3, padx=45, pady=5)
self.label_lights_1.grid(row=3, column=4, columnspan=2, padx=45, sticky=N)
self.btn_tilt_up_1.grid(row=0, column=6, padx=20, pady=5)
self.btn_tilt_down_1.grid(row=1, column=6, padx=20, pady=5)
self.btn_pan_right_1.grid(row=0, column=8, padx=20, pady=5, rowspan=2)
self.btn_pan_left_1.grid(row=0, column=7, padx=20, pady=5, rowspan=2)
self.tilt_speed_1.grid(row=2, column=6)
self.pan_speed_1.grid(row=2, column=7, columnspan=2)
self.ckbx_invert_tilt_1.grid(row=3, column=6)
self.ckbx_invert_pan_1.grid(row=3, column=7, columnspan=2)
# Grid the Overview Camera Controls
self.btn_power_2.grid(row=0, column=0, padx=60)
self.btn_ms_2.grid(row=1, column=0, padx=5, pady=5)
self.btn_near_2.grid(row=0, column=2, padx=20, pady=10)
self.btn_far_2.grid(row=1, column=2, padx=20, pady=10)
self.btn_tele_2.grid(row=0, column=3, padx=20, pady=10)
self.btn_wide_2.grid(row=1, column=3, padx=20, pady=10)
self.label_camera_type_2.grid(row=2, column=0, columnspan=4)
self.left_light_scale_2.grid(row=0, column=4, rowspan=3, padx=20, pady=5)
self.right_light_scale_2.grid(row=0, column=5, rowspan=3, padx=45, pady=5)
self.label_lights_2.grid(row=3, column=4, columnspan=2, padx=45, sticky=N)
self.btn_tilt_up_2.grid(row=0, column=6, padx=20, pady=5)
self.btn_tilt_down_2.grid(row=1, column=6, padx=20, pady=5)
self.btn_pan_right_2.grid(row=0, column=8, padx=20, pady=5, rowspan=2)
self.btn_pan_left_2.grid(row=0, column=7, padx=20, pady=5, rowspan=2)
self.tilt_speed_2.grid(row=2, column=6)
self.pan_speed_2.grid(row=2, column=7, columnspan=2)
self.ckbx_invert_tilt_2.grid(row=3, column=6)
self.ckbx_invert_pan_2.grid(row=3, column=7, columnspan=2)
# Connect to Phidget Devices for Tool Camera
self.power_1 = DigitalOutput()
self.power_1.setDeviceSerialNumber(HUB2)
self.power_1.setIsHubPortDevice(False)
self.power_1.setHubPort(1)
self.power_1.setChannel(0)
try:
self.power_1.openWaitForAttachment(1000)
except PhidgetException as e:
print("Failed to open (CAM POWER): " + e.details)
self.manual_select_1 = DigitalOutput()
self.manual_select_1.setDeviceSerialNumber(HUB2)
self.manual_select_1.setIsHubPortDevice(False)
self.manual_select_1.setHubPort(1)
self.manual_select_1.setChannel(1)
try:
self.manual_select_1.openWaitForAttachment(1000)
except PhidgetException as e:
print("Failed to open (Manual Select): " + e.details)
self.near_1 = DigitalOutput()
self.near_1.setDeviceSerialNumber(HUB2)
self.near_1.setIsHubPortDevice(False)
self.near_1.setHubPort(1)
self.near_1.setChannel(2)
try:
self.near_1.openWaitForAttachment(1000)
except PhidgetException as e:
print("Failed to open (NEAR): " + e.details)
self.far_1 = DigitalOutput()
self.far_1.setDeviceSerialNumber(HUB2)
self.far_1.setIsHubPortDevice(False)
self.far_1.setHubPort(1)
self.far_1.setChannel(3)
try:
self.far_1.openWaitForAttachment(1000)
except PhidgetException as e:
print("Failed to open (FAR): " + e.details)
self.wide_1 = DigitalOutput()
self.wide_1.setDeviceSerialNumber(HUB2)
self.wide_1.setIsHubPortDevice(False)
self.wide_1.setHubPort(1)
self.wide_1.setChannel(4)
try:
self.wide_1.openWaitForAttachment(1000)
except PhidgetException as e:
print("Failed to open (WIDE): " + e.details)
self.tele_1 = DigitalOutput()
self.tele_1.setDeviceSerialNumber(HUB2)
self.tele_1.setIsHubPortDevice(False)
self.tele_1.setHubPort(1)
self.tele_1.setChannel(5)
try:
self.tele_1.openWaitForAttachment(1000)
except PhidgetException as e:
print("Failed to open (TELE): " + e.details)
self.left_light_1 = VoltageOutput()
self.left_light_1.setDeviceSerialNumber(HUB2)
self.left_light_1.setIsHubPortDevice(False)
self.left_light_1.setHubPort(2)
self.left_light_1.setChannel(0)
try:
self.left_light_1.openWaitForAttachment(1000)
except PhidgetException as e:
print("Failed to open (LEFT LIGHT): " + e.details)
self.right_light_1 = VoltageOutput()
self.right_light_1.setDeviceSerialNumber(HUB2)
self.right_light_1.setIsHubPortDevice(False)
self.right_light_1.setHubPort(3)
self.right_light_1.setChannel(0)
try:
self.right_light_1.openWaitForAttachment(1000)
except PhidgetException as e:
print("Failed to open (RIGHT LIGHT): " + e.details)
self.pan_1 = VoltageOutput()
self.pan_1.setDeviceSerialNumber(HUB2)
self.pan_1.setIsHubPortDevice(False)
self.pan_1.setHubPort(5)
self.pan_1.setChannel(0)
try:
self.pan_1.openWaitForAttachment(1000)
except PhidgetException as e:
print("Failed to open (PAN): " + e.details)
self.tilt_1 = VoltageOutput()
self.tilt_1.setDeviceSerialNumber(HUB2)
self.tilt_1.setIsHubPortDevice(False)
self.tilt_1.setHubPort(4)
self.tilt_1.setChannel(0)
try:
self.tilt_1.openWaitForAttachment(1000)
except PhidgetException as e:
print("Failed to open (TILT): " + e.details)
self.btn_near_1.bind('<ButtonPress-1>', lambda event: self.focus_1("+"))
self.btn_near_1.bind('<ButtonRelease-1>', lambda event: self.focus_1("0"))
self.btn_far_1.bind('<ButtonPress-1>', lambda event: self.focus_1("-"))
self.btn_far_1.bind('<ButtonRelease-1>', lambda event: self.focus_1("0"))
self.btn_wide_1.bind('<ButtonPress-1>', lambda event: self.zoom_1("-"))
self.btn_wide_1.bind('<ButtonRelease-1>', lambda event: self.zoom_1("0"))
self.btn_tele_1.bind('<ButtonPress-1>', lambda event: self.zoom_1("+"))
self.btn_tele_1.bind('<ButtonRelease-1>', lambda event: self.zoom_1("0"))
self.btn_ms_1.bind('<ButtonPress-1>', lambda event: self.focus_type_1("ON"))
self.btn_ms_1.bind('<ButtonRelease-1>', lambda event: self.focus_type_1("OFF"))
self.btn_tilt_up_1.bind('<ButtonPress-1>', lambda event: self.tilt_move_1("-"))
self.btn_tilt_up_1.bind('<ButtonRelease-1>', lambda event: self.tilt_move_1("0"))
self.btn_tilt_down_1.bind('<ButtonPress-1>', lambda event: self.tilt_move_1("+"))
self.btn_tilt_down_1.bind('<ButtonRelease-1>', lambda event: self.tilt_move_1("0"))
self.btn_pan_right_1.bind('<ButtonPress-1>', lambda event: self.pan_move_1("R"))
self.btn_pan_right_1.bind('<ButtonRelease-1>', lambda event: self.pan_move_1("0"))
self.btn_pan_left_1.bind('<ButtonPress-1>', lambda event: self.pan_move_1("L"))
self.btn_pan_left_1.bind('<ButtonRelease-1>', lambda event: self.pan_move_1("0"))
# Connect to Phidget Devices for Overview Camera
self.power_2 = DigitalOutput()
self.power_2.setDeviceSerialNumber(HUB2)
self.power_2.setIsHubPortDevice(False)
self.power_2.setHubPort(1)
self.power_2.setChannel(0)
try:
self.power_2.openWaitForAttachment(1000)
except PhidgetException as e:
print("Failed to open (CAM POWER): " + e.details)
self.manual_select_2 = DigitalOutput()
self.manual_select_2.setDeviceSerialNumber(HUB2)
self.manual_select_2.setIsHubPortDevice(False)
self.manual_select_2.setHubPort(1)
self.manual_select_2.setChannel(1)
try:
self.manual_select_2.openWaitForAttachment(1000)
except PhidgetException as e:
print("Failed to open (Manual Select): " + e.details)
self.near_2 = DigitalOutput()
self.near_2.setDeviceSerialNumber(HUB2)
self.near_2.setIsHubPortDevice(False)
self.near_2.setHubPort(1)
self.near_2.setChannel(2)
try:
self.near_2.openWaitForAttachment(1000)
except PhidgetException as e:
print("Failed to open (NEAR): " + e.details)
self.far_2 = DigitalOutput()
self.far_2.setDeviceSerialNumber(HUB2)
self.far_2.setIsHubPortDevice(False)
self.far_2.setHubPort(1)
self.far_2.setChannel(3)
try:
self.far_2.openWaitForAttachment(1000)
except PhidgetException as e:
print("Failed to open (FAR): " + e.details)
self.wide_2 = DigitalOutput()
self.wide_2.setDeviceSerialNumber(HUB2)
self.wide_2.setIsHubPortDevice(False)
self.wide_2.setHubPort(1)
self.wide_2.setChannel(4)
try:
self.wide_2.openWaitForAttachment(1000)
except PhidgetException as e:
print("Failed to open (WIDE): " + e.details)
self.tele_2 = DigitalOutput()
self.tele_2.setDeviceSerialNumber(HUB2)
self.tele_2.setIsHubPortDevice(False)
self.tele_2.setHubPort(1)
self.tele_2.setChannel(5)
try:
self.tele_2.openWaitForAttachment(1000)
except PhidgetException as e:
print("Failed to open (TELE): " + e.details)
self.left_light_2 = VoltageOutput()
self.left_light_2.setDeviceSerialNumber(HUB2)
self.left_light_2.setIsHubPortDevice(False)
self.left_light_2.setHubPort(2)
self.left_light_2.setChannel(0)
try:
self.left_light_2.openWaitForAttachment(1000)
except PhidgetException as e:
print("Failed to open (LEFT LIGHT): " + e.details)
self.right_light_2 = VoltageOutput()
self.right_light_2.setDeviceSerialNumber(HUB2)
self.right_light_2.setIsHubPortDevice(False)
self.right_light_2.setHubPort(3)
self.right_light_2.setChannel(0)
try:
self.right_light_2.openWaitForAttachment(1000)
except PhidgetException as e:
print("Failed to open (RIGHT LIGHT): " + e.details)
self.pan_2 = VoltageOutput()
self.pan_2.setDeviceSerialNumber(HUB2)
self.pan_2.setIsHubPortDevice(False)
self.pan_2.setHubPort(5)
self.pan_2.setChannel(0)
try:
self.pan_2.openWaitForAttachment(1000)
except PhidgetException as e:
print("Failed to open (PAN): " + e.details)
self.tilt_2 = VoltageOutput()
self.tilt_2.setDeviceSerialNumber(HUB2)
self.tilt_2.setIsHubPortDevice(False)
self.tilt_2.setHubPort(4)
self.tilt_2.setChannel(0)
try:
self.tilt_2.openWaitForAttachment(1000)
except PhidgetException as e:
print("Failed to open (TILT): " + e.details)
# Methods for Tool Camera
def toggle_power_1(self):
if self.power_1.getState() == True:
self.power_1.setState(False)
self.btn_power_1.config(bg="SystemButtonFace")
elif self.power_1.getState() == False:
self.power_1.setState(True)
self.btn_power_1.config(bg=self.activeColor_1)
def update_left_intensity_1(self, val):
self.left_light_1.setVoltage(float(val))
def update_right_intensity_1(self, val):
self.right_light_1.setVoltage(float(val))
def focus_1(self, direction):
if direction == "+":
self.near_1.setState(TRUE)
elif direction == "-":
self.far_1.setState(TRUE)
elif direction == "0":
self.far_1.setState(FALSE)
self.near_1.setState(FALSE)
def zoom_1(self, direction):
if direction == "+":
self.tele_1.setState(TRUE)
elif direction == "-":
self.wide_1.setState(TRUE)
elif direction == "0":
self.tele_1.setState(FALSE)
self.wide_1.setState(FALSE)
def pan_move_1(self, direction):
voltage = float(self.pan_speed_1.get())
if self.invert_pan_1.get():
voltage *= -1
if direction == "R":
self.pan_1.setVoltage(voltage)
elif direction == "L":
self.pan_1.setVoltage(-1 * voltage)
elif direction == "0":
self.pan_1.setVoltage(0)
def tilt_move_1(self, direction):
voltage = float(self.tilt_speed_1.get())
if self.invert_tilt_1.get():
voltage *= -1
if direction == "+":
self.tilt_1.setVoltage(voltage)
elif direction == "-":
self.tilt_1.setVoltage(-1 * voltage)
elif direction == "0":
self.tilt_1.setVoltage(0)
def focus_type_1(self, state):
if state == "ON":
self.manual_select_1.setState(True)
elif state == "OFF":
self.manual_select_1.setState(False)
# Methods for Overview Camera
def toggle_power_2(self):
if self.power_2.getState() == True:
self.power_2.setState(False)
self.btn_power_2.config(bg="SystemButtonFace")
elif self.power_2.getState() == False:
self.power_2.setState(True)
self.btn_power_2.config(bg=self.activeColor_2)
def update_left_intensity_2(self, val):
self.left_light_2.setVoltage(float(val))
def update_right_intensity_2(self, val):
self.right_light_2.setVoltage(float(val))
def focus_2(self, direction):
if direction == "+":
self.near_2.setState(TRUE)
elif direction == "-":
self.far_2.setState(TRUE)
elif direction == "0":
self.far_2.setState(FALSE)
self.near_2.setState(FALSE)
def zoom_2(self, direction):
if direction == "+":
self.tele_2.setState(TRUE)
elif direction == "-":
self.wide_2.setState(TRUE)
elif direction == "0":
self.tele_2.setState(FALSE)
self.wide_2.setState(FALSE)
def pan_move_2(self, direction):
voltage = float(self.pan_speed_2.get())
if self.invert_pan_2.get():
voltage *= -1
if direction == "R":
self.pan_2.setVoltage(voltage)
elif direction == "L":
self.pan_2.setVoltage(-1 * voltage)
elif direction == "0":
self.pan_2.setVoltage(0)
def tilt_move_2(self, direction):
voltage = float(self.tilt_speed_2.get())
if self.invert_tilt_2.get():
voltage *= -1
if direction == "+":
self.tilt_2.setVoltage(voltage)
elif direction == "-":
self.tilt_2.setVoltage(-1 * voltage)
elif direction == "0":
self.tilt_2.setVoltage(0)
def focus_type_2(self, state):
if state == "ON":
self.manual_select_2.setState(True)
elif state == "OFF":
self.manual_select_2.setState(False)