def __init__(self):
glutInit()
self.center = numpy.array([0., 0.5, 0.])
self.rotateY = mmMath.deg2Rad(0.)
self.rotateX = mmMath.deg2Rad(-15.0)
# self.distance = 10.
self.distance = 3.1
def preFrameCallback_Always(frame):
if frame < 120 + start_frame:
viewer.doc.setRendererVisible('controlModel', True)
viewer.doc.setRendererVisible('skeleton', False)
viewer.motionViewWnd.glWindow.camera.rotateX = math.pi / 180. * -25.
if frame > start_frame:
viewer.motionViewWnd.glWindow.camera.rotateY = mm.deg2Rad(
(frame - start_frame) * 3 + 45.)
else:
viewer.motionViewWnd.glWindow.camera.rotateY = mm.deg2Rad(45.)
viewer.motionViewWnd.glWindow.camera.distance = .4
viewer.motionViewWnd.glWindow.camera.center = \
.5*(controlModel.getBodyPositionGlobal(idDic['RightFoot']) + controlModel.getBodyPositionGlobal(idDic['LeftFoot'])) + np.array([0., -0.05, 0.])
elif frame > 340:
viewer.doc.setRendererVisible('controlModel', False)
viewer.doc.setRendererVisible('skeleton', True)
else:
if 0 <= frame % 50 < 22:
viewer.doc.setRendererVisible('controlModel', True)
viewer.doc.setRendererVisible('skeleton', False)
elif 22 <= frame % 50 < 25:
viewer.doc.setRendererVisible('controlModel', False)
viewer.doc.setRendererVisible('skeleton', False)
elif 25 <= frame % 50 < 47:
viewer.doc.setRendererVisible('controlModel', False)
viewer.doc.setRendererVisible('skeleton', True)
elif 47 <= frame % 50 < 50:
viewer.doc.setRendererVisible('controlModel', False)
viewer.doc.setRendererVisible('skeleton', False)
def preFrameCallback_Always(frame):
if False:
viewer.motionViewWnd.glWindow.camera.rotateX = math.pi / 180. * -25.
if frame > start_frame:
viewer.motionViewWnd.glWindow.camera.rotateY = mm.deg2Rad(
(frame - start_frame) * 3 + 45.)
else:
viewer.motionViewWnd.glWindow.camera.rotateY = mm.deg2Rad(45.)
viewer.motionViewWnd.glWindow.camera.distance = .4
viewer.motionViewWnd.glWindow.camera.center = \
.5*(controlModel.getBodyPositionGlobal(idDic['RightFoot']) + controlModel.getBodyPositionGlobal(idDic['LeftFoot'])) + np.array([0., -0.05, 0.])
def viewFromTop(self):
self.viewMode = VIEW_TOP
if self.projectionOrtho == False:
self.prevRotX = self.camera.rotateX
self.prevRotY = self.camera.rotateY
self.projectionOrtho = True
self.projectionChanged = True
self.camera.rotateX = mmMath.deg2Rad(-90.0)
self.camera.rotateY = 0
self.camera.rotateZ = 0
def viewFromRight(self):
self.viewMode = VIEW_RIGHT
if self.projectionOrtho == False:
self.prevRotX = self.camera.rotateX
self.prevRotY = self.camera.rotateY
self.projectionOrtho = True
self.projectionChanged = True
self.camera.rotateX = 0
self.camera.rotateY = mmMath.deg2Rad(90.0)
self.camera.rotateZ = 0
def addJointSO3FromBvhJoint(self,
jointPosture,
bvhJoint,
channelValues,
scale=1.0):
localR = mm.I_SO3()
local_t = mm.O_Vec3()
for channel in bvhJoint.channels:
if channel.channelType == 'XPOSITION':
# jointPosture.rootPos[0] = channelValues[channel.channelIndex]*scale
local_t[0] = channelValues[channel.channelIndex] * scale
elif channel.channelType == 'YPOSITION':
# jointPosture.rootPos[1] = channelValues[channel.channelIndex]*scale
local_t[1] = channelValues[channel.channelIndex] * scale
elif channel.channelType == 'ZPOSITION':
# jointPosture.rootPos[2] = channelValues[channel.channelIndex]*scale
local_t[2] = channelValues[channel.channelIndex] * scale
elif channel.channelType == 'XROTATION':
localR = numpy.dot(
localR,
mm.exp(mm.s2v((1, 0, 0)),
mm.deg2Rad(channelValues[channel.channelIndex])))
elif channel.channelType == 'YROTATION':
localR = numpy.dot(
localR,
mm.exp(mm.s2v((0, 1, 0)),
mm.deg2Rad(channelValues[channel.channelIndex])))
elif channel.channelType == 'ZROTATION':
localR = numpy.dot(
localR,
mm.exp(mm.s2v((0, 0, 1)),
mm.deg2Rad(channelValues[channel.channelIndex])))
# jointPosture.setLocalR(bvhJoint.name, localR)
jointPosture.setLocalR(
jointPosture.skeleton.getElementIndex(bvhJoint.name), localR)
jointPosture.setLocal_t(
jointPosture.skeleton.getElementIndex(bvhJoint.name), local_t)
for i in range(len(bvhJoint.children)):
self.addJointSO3FromBvhJoint(jointPosture, bvhJoint.children[i],
channelValues, scale)
def preFrameCallback_Always(frame):
# print(mm.rad2Deg(math.pi/6.*math.sin((frame-30)*math.pi/180.)))
if frame <= start_frame:
vpWorld.set_plane(0, mm.unitY(), np.zeros(3))
if frame > start_frame:
if math.sin((frame - start_frame) / 360. * math.pi) > 0.:
if frame < start_frame + 50:
setParamVal(
'com Z offset', 0.02 *
math.sin(2. * (frame - start_frame) / 360. * math.pi))
else:
setParamVal('com Z offset', 0.0)
if math.sin((frame - start_frame) / 360. * math.pi) > 0.:
foot_viewer.check_not_all_seg()
foot_viewer.check_tiptoe_all()
setParamVal(
'tiptoe angle',
mm.deg2Rad(10.) * math.sin(
(frame - start_frame) / 360. * math.pi))
# foot_viewer.check_h_l.value(False)
# foot_viewer.check_h_r.value(False)
else:
foot_viewer.check_all_seg()
# foot_viewer.check_tiptoe_all()
# foot_viewer.check_h_l.value(True)
# foot_viewer.check_h_r.value(True)
vpWorld.set_plane(
0,
np.dot(
mm.exp(
-mm.unitX(),
mm.deg2Rad(10.) * math.sin(
(frame - start_frame) / 360. * math.pi)),
mm.unitY()), np.zeros(3))
plane_list = vpWorld.get_plane_list()
plane_normal = plane_list[0][0]
plane_origin = plane_list[0][1]
viewer.motionViewWnd.glWindow.pOnPlaneshadow = plane_origin + plane_normal * 0.001
viewer.motionViewWnd.glWindow.normalshadow = plane_normal
def preFrameCallback_Always(frame):
global COLOR_ON
viewer.motionViewWnd.glWindow.camera.rotateX = math.pi / 180. * -25.
viewer.motionViewWnd.glWindow.camera.rotateY = mm.deg2Rad(45.)
viewer.motionViewWnd.glWindow.camera.distance = .5
viewer.motionViewWnd.glWindow.camera.center = np.array(
[0.04347, -0.01005, -0.31936])
if frame < start_frame:
setParamVal('com Y offset', -0.11)
viewer.doc.setRendererVisible('motionModel', False)
viewer.doc.setRendererVisible('skeleton', True)
elif frame < start_frame + 20:
viewer.doc.setRendererVisible('motionModel', True)
elif frame < start_frame + 50:
setParamVal('com X offset', (frame - start_frame - 20) * 0.003)
elif frame < start_frame + 70:
pass
elif frame < start_frame + 90:
COLOR_ON = True
elif frame < start_frame + 105:
setParamVal('com Y offset',
-0.11 + (frame - start_frame - 90) * 0.0032)
setParamVal('tiptoe angle', (frame - start_frame - 90) * 0.012)
elif frame < start_frame + 120:
pass
elif frame < start_frame + 135:
setParamVal('com Y offset',
-0.065 - (frame - start_frame - 120) * 0.0032)
setParamVal('tiptoe angle',
0.168 - (frame - start_frame - 120) * 0.012)
elif frame < start_frame + 150:
pass
elif frame < start_frame + 165:
setParamVal('com Y offset',
-0.11 + (frame - start_frame - 150) * 0.0004)
setParamVal('left tilt angle',
-(frame - start_frame - 150) * 0.012)
elif frame < start_frame + 180:
pass
elif frame < start_frame + 195:
setParamVal('com Y offset',
-0.104 - (frame - start_frame - 180) * 0.0004)
setParamVal('left tilt angle',
-0.168 + (frame - start_frame - 180) * 0.012)
def handle(self, e):
returnVal = 0
if e == FL_RELEASE:
self.mouseX = Fl.event_x()
self.mouseY = Fl.event_y()
if self.mouse_pick_on:
self.checkMousePick()
returnVal = 1
elif e == FL_PUSH:
self.mouseX = Fl.event_x()
self.mouseY = Fl.event_y()
returnVal = 1
elif e == FL_DRAG:
self.mouseX = Fl.event_x()
self.mouseY = Fl.event_y()
mouseDeltaX = self.mouseX - self.mousePrevX
mouseDeltaY = self.mouseY - self.mousePrevY
button = Fl.event_button()
if button == 1:
self.camera.rotateY -= mmMath.deg2Rad(mouseDeltaX)
if self.viewMode == VIEW_PERSPECTIVE:
self.camera.rotateX -= mmMath.deg2Rad(mouseDeltaY)
elif button == 2:
if self.viewMode != VIEW_TOP:
self.camera.center[
1] += self.camera.distance * .05 * mouseDeltaY / 12.0
elif button == 3:
# right
self.camera.center[0] -= self.camera.distance * .05 * math.cos(
self.camera.rotateY) * mouseDeltaX / 12.0
self.camera.center[
2] -= self.camera.distance * .05 * -math.sin(
self.camera.rotateY) * mouseDeltaX / 12.0
if self.viewMode == VIEW_PERSPECTIVE or self.viewMode == VIEW_TOP:
# look
self.camera.center[
0] -= self.camera.distance * .05 * math.sin(
self.camera.rotateY) * mouseDeltaY / 12.0
self.camera.center[
2] -= self.camera.distance * .05 * math.cos(
self.camera.rotateY) * mouseDeltaY / 12.0
returnVal = 1
elif e == FL_MOUSEWHEEL:
self.camera.distance -= self.camera.distance * .2 * Fl.event_dy(
) / 3.0
# self.camera.distance -= Fl.event_dy() / 3.0
if self.camera.distance < 0.0001:
self.camera.distance = 0.0001
self.projectionChanged = True
returnVal = 1
elif e == FL_KEYUP:
if Fl.event_key() == ord('!'):
self.viewFromFront()
elif Fl.event_key() == ord('@'):
self.viewFromRight()
elif Fl.event_key() == ord('#'):
self.viewFromTop()
elif Fl.event_key() == ord('$'):
self.viewPerspective()
# elif Fl.event_key()==ord('a'):
# self.cameraMode ^= True
# elif Fl.event_key()==ord('q'):
# self.viewFromFront()
# elif Fl.event_key()==ord('w'):
# self.viewFromRight()
# elif Fl.event_key()==ord('e'):
# self.viewFromTop()
# elif Fl.event_key()==ord('r'):
# self.viewPerspective()
# elif Fl.event_key()==ord('v'):
# self.force = [0, -self.forceMag/4., self.forceMag]
# #self.force = [self.forceMag, -self.forceMag/2, self.forceMag]
# self.forceDir = 1
# elif Fl.event_key()==ord('f'):
# self.force = [0, 0, 0]
# self.forceDir = 0
'''
elif Fl.event_key()==ord('p'):
self.forceMag += 1.0
if self.forceDir == 1:
self.force[2] = self.forceMag
elif self.forceDir == 2:
self.force[2] = -self.forceMag
elif self.forceDir == 3:
self.force[0] = -self.forceMag
elif self.forceDir == 4:
self.force[0] = self.forceMag
print("forceMag", self.forceMag)
elif Fl.event_key()==ord('o'):
self.forceMag -= 1.0
if self.forceDir == 1:
self.force[2] = self.forceMag
elif self.forceDir == 2:
self.force[2] = -self.forceMag
elif self.forceDir == 3:
self.force[0] = -self.forceMag
elif self.forceDir == 4:
self.force[0] = self.forceMag
print("forceMag", self.forceMag)
'''
returnVal = 1
self.mousePrevX = self.mouseX
self.mousePrevY = self.mouseY
if returnVal == 1:
self.redraw()
return returnVal
def create_biped(motionName='wd2_n_kick.bvh',
SEGMENT_FOOT=True,
SEGMENT_FOOT_MAG=.03,
SEGMENT_FOOT_RAD=None):
"""
:param motionName: motion file name
:param SEGMENT_FOOT: whether segment foot is
:param SEGMENT_FOOT_MAG:
:return:
"""
# :rtype: ym.JointMotion, ypc.ModelConfig, ypc.WorldConfig, int, dict[str, float|dict[str, float]], float
if SEGMENT_FOOT_RAD is None:
SEGMENT_FOOT_RAD = SEGMENT_FOOT_MAG * .5
SEGMENT_FOOT_SEPARATE = False
SEGMENT_FOOT_OUTSIDE_JOINT_FIRST = True
SEGMENT_FOOT_ARC = True
SEGMENT_BETWEEN_SPACE = 1.2
SEGMENT_METATARSAL_LEN = 2.5
SEGMENT_THIRD_PHA_LEN = 1.8
SEGMENT_FOURTH_PHA_RATIO = 5. / 6.
SEGMENT_HEEL_LEN = 1.2
# motion
# motionName = 'wd2_n_kick.bvh'
# motionName = 'wd2_tiptoe.bvh'
# motionName = 'wd2_n_kick_zygote.bvh'
# motionName = 'wd2_jump.bvh'
# motionName = 'wd2_stand.bvh'
bvh = yf.readBvhFileAsBvh(motionName)
bvh.set_scale(.01)
if SEGMENT_FOOT:
# partBvhFilePath = '../PyCommon/modules/samples/simpleJump_long_test2.bvh'
current_path = os.path.dirname(os.path.abspath(__file__))
partBvhFilePath = current_path + '/../../PyCommon/modules/samples/'
if SEGMENT_FOOT_SEPARATE:
partBvhFilePath = partBvhFilePath + 'simpleJump_long_test5.bvh'
elif SEGMENT_FOOT_OUTSIDE_JOINT_FIRST:
# partBvhFilePath = partBvhFilePath + 'simpleJump_long_test3.bvh'
# partBvhFilePath = partBvhFilePath + 'foot_model_01.bvh'
partBvhFilePath = partBvhFilePath + 'foot_model_01.bvh'
else:
partBvhFilePath = partBvhFilePath + 'simpleJump_long_test4.bvh'
partBvh = yf.readBvhFileAsBvh(partBvhFilePath)
partSkeleton = partBvh.toJointSkeleton(1., False)
SEGMENT_BETWEEN_SPACE = partSkeleton.getOffset(
partSkeleton.getElementIndex('foot_0_1'))[0]
SEGMENT_METATARSAL_LEN = partSkeleton.getOffset(
partSkeleton.getElementIndex('foot_0_1_0'))[2]
SEGMENT_THIRD_PHA_LEN = partSkeleton.getOffset(
partSkeleton.getElementIndex('foot_0_0_0_Effector'))[2]
SEGMENT_HEEL_LEN = abs(
partSkeleton.getOffset(
partSkeleton.getElementIndex('foot_1_0_Effector'))[2])
bvh.replaceJointFromBvh('RightFoot', partBvh, SEGMENT_FOOT_MAG)
partBvh = yf.readBvhFileAsBvh(partBvhFilePath)
partBvh.mirror('YZ')
bvh.replaceJointFromBvh('LeftFoot', partBvh, SEGMENT_FOOT_MAG)
motion = bvh.toJointMotion(1., False) # type: ym.JointMotion
# motion.translateByOffset((0., 0.15, 0.))
# motion.translateByOffset((0., -0.12, 0.))
# motion.rotateByOffset(mm.rotZ(math.pi*1./18.))
# motion = yf.readBvhFile(motionName, .01)
# yme.offsetJointLocal(motion, 'RightArm', (.03,-.05,0), False)
# yme.offsetJointLocal(motion, 'LeftArm', (-.03,-.05,0), False)
# yme.rotateJointLocal(motion, 'Hips', mm.exp(mm.v3(1, 0, 0), .01), False)
# yme.rotateJointLocal(motion, 'LeftFoot', mm.exp(mm.v3(1,-0.0,.3), -.5), False)
# yme.rotateJointLocal(motion, 'RightFoot', mm.exp(mm.v3(1,0.0,-.3), -.5), False)
# yme.rotateJointLocal(motion, 'LeftFoot', mm.exp(mm.v3(1,-0.5,0), -.6), False)
# yme.rotateJointLocal(motion, 'RightFoot', mm.exp(mm.v3(1,0.5,0), -.6), False)
# yme.rotateJointLocal(motion, 'LeftFoot', mm.exp(mm.v3(1,-0.0,.3), -.1), False)
# yme.rotateJointLocal(motion, 'RightFoot', mm.exp(mm.v3(1,0.0,-.3), -.1), False)
# yme.removeJoint(motion, 'RightFoot_foot_1_1')
# yme.removeJoint(motion, 'RightFoot_foot_1_2')
# yme.removeJoint(motion, 'LeftFoot_foot_1_1')
# yme.removeJoint(motion, 'LeftFoot_foot_1_2')
if motionName == 'wd2_n_kick.bvh' or motionName == 'wd2_n_kick_zygote.bvh':
yme.rotateJointLocal(motion, 'Hips', mm.exp(mm.v3(1, 0, 0), .01),
False)
yme.updateGlobalT(motion)
motion.translateByOffset((0, 0.04, 0))
for i in range(2000):
motion.data.insert(0, copy.deepcopy(motion[0]))
motion.extend([motion[-1]] * 300)
elif motionName == 'wd2_tiptoe.bvh' or motionName == 'wd2_tiptoe_zygote.bvh':
yme.rotateJointLocal(motion, 'Hips', mm.exp(mm.v3(1, 0, 0), .01),
False)
yme.rotateJointLocal(motion, 'LeftFoot',
mm.exp(mm.v3(1., 0., 0.), -.1), False)
yme.rotateJointLocal(motion, 'RightFoot',
mm.exp(mm.v3(1., 0., 0.), -.1), False)
yme.updateGlobalT(motion)
motion.translateByOffset((0, 0.06, 0))
# if motionName == 'wd2_tiptoe.bvh':
# motion.translateByOffset((0, 0.06, 0))
# else:
# motion.translateByOffset((0, -0.03, 0))
del motion[:270]
for i in range(2000):
motion.data.insert(0, copy.deepcopy(motion[0]))
# world, model
mcfg = ypc.ModelConfig()
mcfg.defaultDensity = 1000.
mcfg.defaultBoneRatio = .9
for name in massMap:
node = mcfg.addNode(name)
node.mass = massMap[name]
wcfg = ypc.WorldConfig()
wcfg.planeHeight = 0.
wcfg.useDefaultContactModel = False
stepsPerFrame = 60
# stepsPerFrame = 30
frame_rate = 30
wcfg.timeStep = 1. / (frame_rate * stepsPerFrame)
# wcfg.timeStep = (1/30.)/(stepsPerFrame)
# wcfg.timeStep = (1/1000.)
# width : x axis on body frame
# height: y axis on body frame
# length: z axis on body frame
node = mcfg.getNode('Hips')
node.length = 4. / 27.
node.width = .25
# node.height = .2
# node.width = .25
node = mcfg.getNode('Spine1')
node.length = .2
node.offset = (0, 0, 0.1)
node = mcfg.getNode('Spine')
node.width = .22
node = mcfg.getNode('RightFoot')
node.length = .25
#node.length = .2
#node.width = .15
node.width = .2
node.mass = 2.
node = mcfg.getNode('LeftFoot')
node.length = .25
#node.length = .2
#node.width = .15
node.width = .2
node.mass = 2.
def capsulize(node_name):
node_capsule = mcfg.getNode(node_name)
node_capsule.geom = 'MyFoot4'
node_capsule.width = 0.01
node_capsule.density = 200.
# node.addGeom('MyFoot4', [np.array([0.]*3), mm.exp([0., math.pi/4., 0.])], ypc.CapsuleMaterial(1000., .02, .2))
# node.addGeom('MyFoot4', [np.array([0.]*3), mm.exp([0., math.pi/4., 0.])], ypc.CapsuleMaterial(1000., .02, .1))
# node.addGeom('MyFoot4', [np.array([0.]*3), mm.exp([0., 0., 0.])], ypc.CapsuleMaterial(1000., .01, -1))
# node.addGeom('MyFoot4', None, ypc.CapsuleMaterial(1000., .02, .1))
# capsulize('RightFoot')
# capsulize('LeftFoot')
if SEGMENT_FOOT:
node = mcfg.getNode('RightFoot')
node.density = 200.
node.geom = 'MyFoot5'
node.width = 0.01
node.jointType = 'B'
node = mcfg.getNode('LeftFoot')
node.density = 200.
node.geom = 'MyFoot5'
node.width = 0.01
node.jointType = 'B'
# bird foot
# capsulize('RightFoot_foot_0_0')
# capsulize('RightFoot_foot_0_1')
# capsulize('RightFoot_foot_1_0')
# capsulize('RightFoot_foot_1_1')
# capsulize('RightFoot_foot_2_0')
# capsulize('RightFoot_foot_2_1')
# capsulize('LeftFoot_foot_0_0')
# capsulize('LeftFoot_foot_0_1')
# capsulize('LeftFoot_foot_1_0')
# capsulize('LeftFoot_foot_1_1')
# capsulize('LeftFoot_foot_2_0')
# capsulize('LeftFoot_foot_2_1')
# human foot
if SEGMENT_FOOT:
footJointType = 'B'
capsulDensity = 400.
if SEGMENT_FOOT_SEPARATE:
# RightFoot_foot_0_0 : outside metatarsals
capsulize('RightFoot_foot_0_0')
node = mcfg.getNode('RightFoot_foot_0_0')
# node.addGeom('MyFoot3', [SEGMENT_FOOT_MAG*np.array([0., 0., 2.5*0.25]), mm.exp([0., 0., 0.])],
node.addGeom(
'MyFoot3', [
SEGMENT_FOOT_MAG * np.array([0., 0., 0.]),
mm.exp([0., 0., 0.])
],
ypc.CapsuleMaterial(
capsulDensity, SEGMENT_FOOT_RAD,
SEGMENT_FOOT_MAG * 2.5 + 2. * SEGMENT_FOOT_RAD))
node.addGeom(
'MyFoot3', [
SEGMENT_FOOT_MAG * np.array([0. - 1.2, 0., 0.]),
mm.exp([0., 0., 0.])
],
ypc.CapsuleMaterial(
capsulDensity, SEGMENT_FOOT_RAD,
SEGMENT_FOOT_MAG * 2.5 + 2. * SEGMENT_FOOT_RAD))
node.jointType = footJointType
# RightFoot_foot_0_0_0 : outside phalanges
capsulize('RightFoot_foot_0_0_0')
node = mcfg.getNode('RightFoot_foot_0_0_0')
node.addGeom(
'MyFoot4',
[np.array([0.] * 3), mm.exp([0.] * 3)],
ypc.CapsuleMaterial(capsulDensity, SEGMENT_FOOT_RAD, -1))
node.addGeom(
'MyFoot4', [
SEGMENT_FOOT_MAG * np.array([-1.2, 0., 0.]),
mm.exp([0.] * 3)
], ypc.CapsuleMaterial(capsulDensity, SEGMENT_FOOT_RAD, -1))
node.jointType = footJointType
# RightFoot_foot_0_1 : inside metatarsals
capsulize('RightFoot_foot_0_1')
node = mcfg.getNode('RightFoot_foot_0_1')
node.addGeom(
'MyFoot3',
[np.array([0.] * 3), mm.exp([0.] * 3)],
ypc.CapsuleMaterial(capsulDensity, SEGMENT_FOOT_RAD, -1))
node.addGeom(
'MyFoot3',
[SEGMENT_FOOT_MAG * np.array([1.2, 0., 0.]),
mm.exp([0.] * 3)],
ypc.CapsuleMaterial(capsulDensity, SEGMENT_FOOT_RAD, -1))
node.jointType = footJointType
# RightFoot_foot_0_1_0 : inside phalanges
capsulize('RightFoot_foot_0_1_0')
node = mcfg.getNode('RightFoot_foot_0_1_0')
node.addGeom(
'MyFoot4',
[np.array([0.] * 3), mm.exp([0.] * 3)],
ypc.CapsuleMaterial(capsulDensity, SEGMENT_FOOT_RAD, -1))
node.addGeom(
'MyFoot4',
[SEGMENT_FOOT_MAG * np.array([1.2, 0., 0.]),
mm.exp([0.] * 3)],
ypc.CapsuleMaterial(capsulDensity, SEGMENT_FOOT_RAD, -1))
node.jointType = footJointType
# RightFoot_foot_1_0 : center heel
capsulize('RightFoot_foot_1_0')
node = mcfg.getNode('RightFoot_foot_1_0')
node.addGeom(
'MyFoot3',
[SEGMENT_FOOT_MAG * np.array([-.6, 0., 0.]),
mm.exp([0.] * 3)],
ypc.CapsuleMaterial(
capsulDensity, SEGMENT_FOOT_RAD,
SEGMENT_FOOT_MAG * 1.2 + 2. * SEGMENT_FOOT_RAD))
node.addGeom(
'MyFoot3',
[SEGMENT_FOOT_MAG * np.array([+.6, 0., 0.]),
mm.exp([0.] * 3)],
ypc.CapsuleMaterial(
capsulDensity, SEGMENT_FOOT_RAD,
SEGMENT_FOOT_MAG * 1.2 + 2. * SEGMENT_FOOT_RAD))
node.jointType = footJointType
capsulize('LeftFoot_foot_0_0')
node = mcfg.getNode('LeftFoot_foot_0_0')
node.addGeom(
'MyFoot3', [
SEGMENT_FOOT_MAG * np.array([0., 0., 0.]),
mm.exp([0., 0., 0.])
],
ypc.CapsuleMaterial(
capsulDensity, SEGMENT_FOOT_RAD,
SEGMENT_FOOT_MAG * 2.5 + 2. * SEGMENT_FOOT_RAD))
node.addGeom(
'MyFoot3', [
SEGMENT_FOOT_MAG * np.array([0. + 1.2, 0., 0.]),
mm.exp([0., 0., 0.])
],
ypc.CapsuleMaterial(
capsulDensity, SEGMENT_FOOT_RAD,
SEGMENT_FOOT_MAG * 2.5 + 2. * SEGMENT_FOOT_RAD))
node.jointType = footJointType
capsulize('LeftFoot_foot_0_0_0')
node = mcfg.getNode('LeftFoot_foot_0_0_0')
node.addGeom(
'MyFoot4',
[np.array([0.] * 3), mm.exp([0.] * 3)],
ypc.CapsuleMaterial(capsulDensity, SEGMENT_FOOT_RAD, -1))
node.addGeom(
'MyFoot4',
[SEGMENT_FOOT_MAG * np.array([1.2, 0., 0.]),
mm.exp([0.] * 3)],
ypc.CapsuleMaterial(capsulDensity, SEGMENT_FOOT_RAD, -1))
node.jointType = footJointType
capsulize('LeftFoot_foot_0_1')
node = mcfg.getNode('LeftFoot_foot_0_1')
node.addGeom(
'MyFoot3',
[np.array([0.] * 3), mm.exp([0.] * 3)],
ypc.CapsuleMaterial(capsulDensity, SEGMENT_FOOT_RAD, -1))
node.addGeom(
'MyFoot3', [
SEGMENT_FOOT_MAG * np.array([-1.2, 0., 0.]),
mm.exp([0.] * 3)
], ypc.CapsuleMaterial(capsulDensity, SEGMENT_FOOT_RAD, -1))
node.jointType = footJointType
capsulize('LeftFoot_foot_0_1_0')
node = mcfg.getNode('LeftFoot_foot_0_1_0')
node.addGeom(
'MyFoot4',
[np.array([0.] * 3), mm.exp([0.] * 3)],
ypc.CapsuleMaterial(capsulDensity, SEGMENT_FOOT_RAD, -1))
node.addGeom(
'MyFoot4', [
SEGMENT_FOOT_MAG * np.array([-1.2, 0., 0.]),
mm.exp([0.] * 3)
], ypc.CapsuleMaterial(capsulDensity, SEGMENT_FOOT_RAD, -1))
node.jointType = footJointType
capsulize('LeftFoot_foot_1_0')
node = mcfg.getNode('LeftFoot_foot_1_0')
node.addGeom(
'MyFoot3',
[SEGMENT_FOOT_MAG * np.array([-.6, 0., .0]),
mm.exp([0.] * 3)],
ypc.CapsuleMaterial(
capsulDensity, SEGMENT_FOOT_RAD,
SEGMENT_FOOT_MAG * 1.2 + 2. * SEGMENT_FOOT_RAD))
node.addGeom(
'MyFoot3',
[SEGMENT_FOOT_MAG * np.array([+.6, 0., .0]),
mm.exp([0.] * 3)],
ypc.CapsuleMaterial(
capsulDensity, SEGMENT_FOOT_RAD,
SEGMENT_FOOT_MAG * 1.2 + 2. * SEGMENT_FOOT_RAD))
node.jointType = footJointType
elif SEGMENT_FOOT_OUTSIDE_JOINT_FIRST and not SEGMENT_FOOT_ARC:
# RightFoot_foot_0_0 : outside metatarsals
capsulize('RightFoot_foot_0_0')
node = mcfg.getNode('RightFoot_foot_0_0')
node.addGeom(
'MyFoot3', [
SEGMENT_FOOT_MAG * np.array([-0.3, 0., 2.5 * 0.25]),
mm.exp([0., -math.atan2(1.2, 2.5), 0.])
],
ypc.CapsuleMaterial(
capsulDensity, SEGMENT_FOOT_RAD,
SEGMENT_FOOT_MAG * 2.5 + 2. * SEGMENT_FOOT_RAD))
node.addGeom(
'MyFoot3', [
SEGMENT_FOOT_MAG * np.array([-0.3 - 1.2, 0., 2.5 * 0.25]),
mm.exp([0., -math.atan2(1.2, 2.5), 0.])
],
ypc.CapsuleMaterial(
capsulDensity, SEGMENT_FOOT_RAD,
SEGMENT_FOOT_MAG * 2.5 + 2. * SEGMENT_FOOT_RAD))
# node.jointType = footJointType
node.jointType = 'B'
# RightFoot_foot_0_0_0 : outside phalanges
capsulize('RightFoot_foot_0_0_0')
node = mcfg.getNode('RightFoot_foot_0_0_0')
node.addGeom(
'MyFoot4',
[np.array([0.] * 3), mm.exp([0.] * 3)],
ypc.CapsuleMaterial(capsulDensity, SEGMENT_FOOT_RAD, -1))
node.addGeom(
'MyFoot4', [
SEGMENT_FOOT_MAG * np.array([-1.2, 0., 0.]),
mm.exp([0.] * 3)
], ypc.CapsuleMaterial(capsulDensity, SEGMENT_FOOT_RAD, -1))
node.jointType = footJointType
# node.jointType = 'R'
# node.jointAxes = ['X']
# RightFoot_foot_0_1 : inside metatarsals
capsulize('RightFoot_foot_0_1')
node = mcfg.getNode('RightFoot_foot_0_1')
node.addGeom(
'MyFoot3',
[np.array([0.] * 3), mm.exp([0.] * 3)],
ypc.CapsuleMaterial(capsulDensity, SEGMENT_FOOT_RAD, -1))
node.addGeom(
'MyFoot3',
[SEGMENT_FOOT_MAG * np.array([1.2, 0., 0.]),
mm.exp([0.] * 3)],
ypc.CapsuleMaterial(capsulDensity, SEGMENT_FOOT_RAD, -1))
node.jointType = footJointType
# node.jointType = 'R'
# node.jointAxes = ['Z']
# RightFoot_foot_0_1_0 : inside phalanges
capsulize('RightFoot_foot_0_1_0')
node = mcfg.getNode('RightFoot_foot_0_1_0')
node.addGeom(
'MyFoot4',
[np.array([0.] * 3), mm.exp([0.] * 3)],
ypc.CapsuleMaterial(capsulDensity, SEGMENT_FOOT_RAD, -1))
node.addGeom(
'MyFoot4',
[SEGMENT_FOOT_MAG * np.array([1.2, 0., 0.]),
mm.exp([0.] * 3)],
ypc.CapsuleMaterial(capsulDensity, SEGMENT_FOOT_RAD, -1))
node.jointType = footJointType
# node.jointType = 'R'
# node.jointAxes = ['X']
# RightFoot_foot_1_0 : center heel
capsulize('RightFoot_foot_1_0')
node = mcfg.getNode('RightFoot_foot_1_0')
node.addGeom(
'MyFoot3',
[SEGMENT_FOOT_MAG * np.array([-.6, 0., 0.]),
mm.exp([0.] * 3)],
ypc.CapsuleMaterial(
capsulDensity, SEGMENT_FOOT_RAD,
SEGMENT_FOOT_MAG * 1.2 + 2. * SEGMENT_FOOT_RAD))
node.addGeom(
'MyFoot3',
[SEGMENT_FOOT_MAG * np.array([+.6, 0., 0.]),
mm.exp([0.] * 3)],
ypc.CapsuleMaterial(
capsulDensity, SEGMENT_FOOT_RAD,
SEGMENT_FOOT_MAG * 1.2 + 2. * SEGMENT_FOOT_RAD))
# node.jointType = footJointType
node.jointType = 'B'
# left foot
# outside metatarsals
capsulize('LeftFoot_foot_0_0')
node = mcfg.getNode('LeftFoot_foot_0_0')
node.addGeom(
'MyFoot3', [
SEGMENT_FOOT_MAG * np.array([0.3, 0., 2.5 * 0.25]),
mm.exp([0., math.atan2(1.2, 2.5), 0.])
],
ypc.CapsuleMaterial(
capsulDensity, SEGMENT_FOOT_RAD,
SEGMENT_FOOT_MAG * 2.5 + 2. * SEGMENT_FOOT_RAD))
node.addGeom(
'MyFoot3', [
SEGMENT_FOOT_MAG * np.array([0.3 + 1.2, 0., 2.5 * 0.25]),
mm.exp([0., math.atan2(1.2, 2.5), 0.])
],
ypc.CapsuleMaterial(
capsulDensity, SEGMENT_FOOT_RAD,
SEGMENT_FOOT_MAG * 2.5 + 2. * SEGMENT_FOOT_RAD))
# node.jointType = footJointType
node.jointType = 'B'
capsulize('LeftFoot_foot_0_0_0')
node = mcfg.getNode('LeftFoot_foot_0_0_0')
node.addGeom(
'MyFoot4',
[np.array([0.] * 3), mm.exp([0.] * 3)],
ypc.CapsuleMaterial(capsulDensity, SEGMENT_FOOT_RAD, -1))
node.addGeom(
'MyFoot4',
[SEGMENT_FOOT_MAG * np.array([1.2, 0., 0.]),
mm.exp([0.] * 3)],
ypc.CapsuleMaterial(capsulDensity, SEGMENT_FOOT_RAD, -1))
node.jointType = footJointType
# node.jointType = 'R'
# node.jointAxes = ['X']
capsulize('LeftFoot_foot_0_1')
node = mcfg.getNode('LeftFoot_foot_0_1')
node.addGeom(
'MyFoot3',
[np.array([0.] * 3), mm.exp([0.] * 3)],
ypc.CapsuleMaterial(capsulDensity, SEGMENT_FOOT_RAD, -1))
node.addGeom(
'MyFoot3', [
SEGMENT_FOOT_MAG * np.array([-1.2, 0., 0.]),
mm.exp([0.] * 3)
], ypc.CapsuleMaterial(capsulDensity, SEGMENT_FOOT_RAD, -1))
node.jointType = footJointType
# node.jointType = 'R'
# node.jointAxes = ['Z']
capsulize('LeftFoot_foot_0_1_0')
node = mcfg.getNode('LeftFoot_foot_0_1_0')
node.addGeom(
'MyFoot4',
[np.array([0.] * 3), mm.exp([0.] * 3)],
ypc.CapsuleMaterial(capsulDensity, SEGMENT_FOOT_RAD, -1))
node.addGeom(
'MyFoot4', [
SEGMENT_FOOT_MAG * np.array([-1.2, 0., 0.]),
mm.exp([0.] * 3)
], ypc.CapsuleMaterial(capsulDensity, SEGMENT_FOOT_RAD, -1))
node.jointType = footJointType
# node.jointType = 'R'
# node.jointAxes = ['X']
capsulize('LeftFoot_foot_1_0')
node = mcfg.getNode('LeftFoot_foot_1_0')
node.addGeom(
'MyFoot3',
[SEGMENT_FOOT_MAG * np.array([-.6, 0., .0]),
mm.exp([0.] * 3)],
ypc.CapsuleMaterial(
capsulDensity, SEGMENT_FOOT_RAD,
SEGMENT_FOOT_MAG * 1.2 + 2. * SEGMENT_FOOT_RAD))
node.addGeom(
'MyFoot3',
[SEGMENT_FOOT_MAG * np.array([+.6, 0., .0]),
mm.exp([0.] * 3)],
ypc.CapsuleMaterial(
capsulDensity, SEGMENT_FOOT_RAD,
SEGMENT_FOOT_MAG * 1.2 + 2. * SEGMENT_FOOT_RAD))
# node.jointType = footJointType
node.jointType = 'B'
elif SEGMENT_FOOT_OUTSIDE_JOINT_FIRST and SEGMENT_FOOT_ARC:
FIRST_METATARSAL_ANGLE = mm.deg2Rad(30.)
SECOND_METATARSAL_ANGLE = mm.deg2Rad(20.)
THIRD_METATARSAL_ANGLE = mm.deg2Rad(15.)
# RightFoot_foot_0_0 : outside metatarsals
capsulize('RightFoot_foot_0_0')
node = mcfg.getNode('RightFoot_foot_0_0')
node.bone_dir_child = 'RightFoot_foot_0_0_0'
# third
node.addGeom(
'MyFoot3', [
SEGMENT_FOOT_MAG * np.array([
0., .5 * SEGMENT_METATARSAL_LEN *
math.tan(THIRD_METATARSAL_ANGLE), 0.
]),
mm.exp(THIRD_METATARSAL_ANGLE * mm.unitX())
],
ypc.CapsuleMaterial(
capsulDensity, SEGMENT_FOOT_RAD,
SEGMENT_FOOT_MAG * SEGMENT_METATARSAL_LEN /
math.cos(THIRD_METATARSAL_ANGLE) + 2. * SEGMENT_FOOT_RAD))
# fourth
node.addGeom(
'MyFoot3', [
SEGMENT_FOOT_MAG *
np.array([-SEGMENT_BETWEEN_SPACE, 0., 0.]),
mm.exp([0., 0., 0.])
], ypc.CapsuleMaterial(capsulDensity, SEGMENT_FOOT_RAD, -1))
# node.jointType = footJointType
node.jointType = 'B'
capsulize('LeftFoot_foot_0_0')
node = mcfg.getNode('LeftFoot_foot_0_0')
node.bone_dir_child = 'LeftFoot_foot_0_0_0'
node.addGeom(
'MyFoot3', [
SEGMENT_FOOT_MAG * np.array([
0., .5 * SEGMENT_METATARSAL_LEN *
math.tan(THIRD_METATARSAL_ANGLE), 0.
]),
mm.exp(THIRD_METATARSAL_ANGLE * mm.unitX())
],
ypc.CapsuleMaterial(
capsulDensity, SEGMENT_FOOT_RAD,
SEGMENT_FOOT_MAG * SEGMENT_METATARSAL_LEN /
math.cos(THIRD_METATARSAL_ANGLE) + 2. * SEGMENT_FOOT_RAD))
node.addGeom(
'MyFoot3', [
SEGMENT_FOOT_MAG *
np.array([SEGMENT_BETWEEN_SPACE, 0., 0.]),
mm.exp([0., 0., 0.])
], ypc.CapsuleMaterial(capsulDensity, SEGMENT_FOOT_RAD, -1))
# node.jointType = footJointType
node.jointType = 'B'
# RightFoot_foot_0_0_0 : outside phalanges
SEGMENT_FOURTH_PHA_OFFSET = .5 * SEGMENT_THIRD_PHA_LEN * (
1. - SEGMENT_FOURTH_PHA_RATIO)
capsulize('RightFoot_foot_0_0_0')
node = mcfg.getNode('RightFoot_foot_0_0_0')
# third
node.addGeom(
'MyFoot4',
[SEGMENT_FOOT_MAG * np.array([0., 0., 0.]),
mm.exp([0.] * 3)],
ypc.CapsuleMaterial(capsulDensity, SEGMENT_FOOT_RAD, -1))
# fourth
node.addGeom(
'MyFoot4', [
SEGMENT_FOOT_MAG * np.array([
-SEGMENT_BETWEEN_SPACE, 0., -SEGMENT_FOURTH_PHA_OFFSET
]),
mm.exp([0.] * 3)
],
ypc.CapsuleMaterial(
capsulDensity, SEGMENT_FOOT_RAD,
SEGMENT_FOOT_MAG * SEGMENT_THIRD_PHA_LEN *
SEGMENT_FOURTH_PHA_RATIO + 2. * SEGMENT_FOOT_RAD))
node.jointType = footJointType
# node.jointType = 'R'
# node.jointAxes = ['X']
capsulize('LeftFoot_foot_0_0_0')
node = mcfg.getNode('LeftFoot_foot_0_0_0')
node.addGeom(
'MyFoot4',
[SEGMENT_FOOT_MAG * np.array([0., 0., 0.]),
mm.exp([0.] * 3)],
ypc.CapsuleMaterial(capsulDensity, SEGMENT_FOOT_RAD, -1))
node.addGeom(
'MyFoot4', [
SEGMENT_FOOT_MAG * np.array([
SEGMENT_BETWEEN_SPACE, 0., -SEGMENT_FOURTH_PHA_OFFSET
]),
mm.exp([0.] * 3)
],
ypc.CapsuleMaterial(
capsulDensity, SEGMENT_FOOT_RAD,
SEGMENT_FOOT_MAG * SEGMENT_THIRD_PHA_LEN *
SEGMENT_FOURTH_PHA_RATIO + 2. * SEGMENT_FOOT_RAD))
node.jointType = footJointType
# node.jointType = 'R'
# node.jointAxes = ['X']
# RightFoot_foot_0_1 : inside metatarsals
capsulize('RightFoot_foot_0_1')
node = mcfg.getNode('RightFoot_foot_0_1')
# second
node.addGeom(
'MyFoot3', [
SEGMENT_FOOT_MAG * np.array([
0., .5 * SEGMENT_METATARSAL_LEN *
math.tan(SECOND_METATARSAL_ANGLE), 0.
]),
mm.exp(SECOND_METATARSAL_ANGLE * mm.unitX())
],
ypc.CapsuleMaterial(
capsulDensity, SEGMENT_FOOT_RAD,
SEGMENT_FOOT_MAG * SEGMENT_METATARSAL_LEN /
math.cos(SECOND_METATARSAL_ANGLE) + 2. * SEGMENT_FOOT_RAD))
# first
node.addGeom(
'MyFoot3', [
SEGMENT_FOOT_MAG * np.array([
SEGMENT_BETWEEN_SPACE, .5 * SEGMENT_METATARSAL_LEN *
math.tan(FIRST_METATARSAL_ANGLE), 0.
]),
mm.exp(FIRST_METATARSAL_ANGLE * mm.unitX())
],
ypc.CapsuleMaterial(
capsulDensity, SEGMENT_FOOT_RAD,
SEGMENT_FOOT_MAG * SEGMENT_METATARSAL_LEN /
math.cos(FIRST_METATARSAL_ANGLE) + 2. * SEGMENT_FOOT_RAD))
node.jointType = footJointType
# node.jointType = 'R'
# node.jointAxes = ['Z']
capsulize('LeftFoot_foot_0_1')
node = mcfg.getNode('LeftFoot_foot_0_1')
node.addGeom(
'MyFoot3', [
SEGMENT_FOOT_MAG * np.array([
0., .5 * SEGMENT_METATARSAL_LEN *
math.tan(SECOND_METATARSAL_ANGLE), 0.
]),
mm.exp(SECOND_METATARSAL_ANGLE * mm.unitX())
],
ypc.CapsuleMaterial(
capsulDensity, SEGMENT_FOOT_RAD,
SEGMENT_FOOT_MAG * SEGMENT_METATARSAL_LEN /
math.cos(SECOND_METATARSAL_ANGLE) + 2. * SEGMENT_FOOT_RAD))
node.addGeom(
'MyFoot3', [
SEGMENT_FOOT_MAG * np.array([
-SEGMENT_BETWEEN_SPACE, .5 * SEGMENT_METATARSAL_LEN *
math.tan(FIRST_METATARSAL_ANGLE), 0.
]),
mm.exp(FIRST_METATARSAL_ANGLE * mm.unitX())
],
ypc.CapsuleMaterial(
capsulDensity, SEGMENT_FOOT_RAD,
SEGMENT_FOOT_MAG * SEGMENT_METATARSAL_LEN /
math.cos(FIRST_METATARSAL_ANGLE) + 2. * SEGMENT_FOOT_RAD))
node.jointType = footJointType
# node.jointType = 'R'
# node.jointAxes = ['Z']
# RightFoot_foot_0_1_0 : inside phalanges
capsulize('RightFoot_foot_0_1_0')
node = mcfg.getNode('RightFoot_foot_0_1_0')
node.addGeom(
'MyFoot4',
[np.array([0.] * 3), mm.exp([0.] * 3)],
ypc.CapsuleMaterial(capsulDensity, SEGMENT_FOOT_RAD, -1))
node.addGeom(
'MyFoot4', [
SEGMENT_FOOT_MAG *
np.array([SEGMENT_BETWEEN_SPACE, 0., 0.]),
mm.exp([0.] * 3)
], ypc.CapsuleMaterial(capsulDensity, SEGMENT_FOOT_RAD, -1))
node.jointType = footJointType
# node.jointType = 'R'
# node.jointAxes = ['X']
capsulize('LeftFoot_foot_0_1_0')
node = mcfg.getNode('LeftFoot_foot_0_1_0')
node.addGeom(
'MyFoot4',
[np.array([0.] * 3), mm.exp([0.] * 3)],
ypc.CapsuleMaterial(capsulDensity, SEGMENT_FOOT_RAD, -1))
node.addGeom(
'MyFoot4', [
SEGMENT_FOOT_MAG *
np.array([-SEGMENT_BETWEEN_SPACE, 0., 0.]),
mm.exp([0.] * 3)
], ypc.CapsuleMaterial(capsulDensity, SEGMENT_FOOT_RAD, -1))
node.jointType = footJointType
# node.jointType = 'R'
# node.jointAxes = ['X']
# RightFoot_foot_1_0 : center heel
capsulize('RightFoot_foot_1_0')
node = mcfg.getNode('RightFoot_foot_1_0')
node.addGeom(
'MyFoot3', [
SEGMENT_FOOT_MAG *
np.array([-SEGMENT_BETWEEN_SPACE / 2., 0., 0.]),
mm.exp([0.] * 3)
],
ypc.CapsuleMaterial(
capsulDensity, SEGMENT_FOOT_RAD,
SEGMENT_FOOT_MAG * SEGMENT_HEEL_LEN +
2. * SEGMENT_FOOT_RAD))
node.addGeom(
'MyFoot3', [
SEGMENT_FOOT_MAG *
np.array([+SEGMENT_BETWEEN_SPACE / 2., 0., 0.]),
mm.exp([0.] * 3)
],
ypc.CapsuleMaterial(
capsulDensity, SEGMENT_FOOT_RAD,
SEGMENT_FOOT_MAG * SEGMENT_HEEL_LEN +
2. * SEGMENT_FOOT_RAD))
# node.jointType = footJointType
node.jointType = 'B'
capsulize('LeftFoot_foot_1_0')
node = mcfg.getNode('LeftFoot_foot_1_0')
node.addGeom(
'MyFoot3', [
SEGMENT_FOOT_MAG *
np.array([-SEGMENT_BETWEEN_SPACE / 2., 0., .0]),
mm.exp([0.] * 3)
],
ypc.CapsuleMaterial(
capsulDensity, SEGMENT_FOOT_RAD,
SEGMENT_FOOT_MAG * SEGMENT_HEEL_LEN +
2. * SEGMENT_FOOT_RAD))
node.addGeom(
'MyFoot3', [
SEGMENT_FOOT_MAG *
np.array([+SEGMENT_BETWEEN_SPACE / 2., 0., .0]),
mm.exp([0.] * 3)
],
ypc.CapsuleMaterial(
capsulDensity, SEGMENT_FOOT_RAD,
SEGMENT_FOOT_MAG * SEGMENT_HEEL_LEN +
2. * SEGMENT_FOOT_RAD))
# node.jointType = footJointType
node.jointType = 'B'
else: # SEGMENT_FOOT_INSIDE_FIRST
# TODO:
# adjust transformation of geometries
# RightFoot_foot_0_1 : inside metatarsals
capsulize('RightFoot_foot_0_1')
node = mcfg.getNode('RightFoot_foot_0_1')
node.addGeom(
'MyFoot3',
[np.array([0.] * 3),
mm.exp([0., math.atan2(1.2, 2.5), 0.])],
ypc.CapsuleMaterial(capsulDensity, SEGMENT_FOOT_RAD, -1))
node.addGeom(
'MyFoot3', [
SEGMENT_FOOT_MAG * np.array([1.2, 0., 0.]),
mm.exp([0., math.atan2(1.2, 2.5), 0.])
], ypc.CapsuleMaterial(capsulDensity, SEGMENT_FOOT_RAD, -1))
node.jointType = footJointType
# RightFoot_foot_0_1_0 : inside phalanges
capsulize('RightFoot_foot_0_1_0')
node = mcfg.getNode('RightFoot_foot_0_1_0')
node.addGeom(
'MyFoot4',
[np.array([0.] * 3), mm.exp([0.] * 3)],
ypc.CapsuleMaterial(capsulDensity, SEGMENT_FOOT_RAD, -1))
node.addGeom(
'MyFoot4',
[SEGMENT_FOOT_MAG * np.array([1.2, 0., 0.]),
mm.exp([0.] * 3)],
ypc.CapsuleMaterial(capsulDensity, SEGMENT_FOOT_RAD, -1))
node.jointType = footJointType
# RightFoot_foot_0_0 : outside metatarsals
capsulize('RightFoot_foot_0_0')
node = mcfg.getNode('RightFoot_foot_0_0')
node.addGeom(
'MyFoot3', [
SEGMENT_FOOT_MAG * np.array([-0.3, 0., 2.5 * 0.25]),
mm.exp([0., -math.atan2(1.2, 2.5), 0.])
],
ypc.CapsuleMaterial(
capsulDensity, SEGMENT_FOOT_RAD,
SEGMENT_FOOT_MAG * 2.5 + 2. * SEGMENT_FOOT_RAD))
node.addGeom(
'MyFoot3', [
SEGMENT_FOOT_MAG * np.array([-0.3 - 1.2, 0., 2.5 * 0.25]),
mm.exp([0., -math.atan2(1.2, 2.5), 0.])
],
ypc.CapsuleMaterial(
capsulDensity, SEGMENT_FOOT_RAD,
SEGMENT_FOOT_MAG * 2.5 + 2. * SEGMENT_FOOT_RAD))
node.jointType = footJointType
# RightFoot_foot_0_0_0 : outside phalanges
capsulize('RightFoot_foot_0_0_0')
node = mcfg.getNode('RightFoot_foot_0_0_0')
node.addGeom(
'MyFoot4',
[np.array([0.] * 3), mm.exp([0.] * 3)],
ypc.CapsuleMaterial(capsulDensity, SEGMENT_FOOT_RAD, -1))
node.addGeom(
'MyFoot4', [
SEGMENT_FOOT_MAG * np.array([-1.2, 0., 0.]),
mm.exp([0.] * 3)
], ypc.CapsuleMaterial(capsulDensity, SEGMENT_FOOT_RAD, -1))
node.jointType = footJointType
# RightFoot_foot_1_0 : center heel
capsulize('RightFoot_foot_1_0')
node = mcfg.getNode('RightFoot_foot_1_0')
node.addGeom(
'MyFoot3',
[SEGMENT_FOOT_MAG * np.array([-.6, 0., 0.]),
mm.exp([0.] * 3)],
ypc.CapsuleMaterial(
capsulDensity, SEGMENT_FOOT_RAD,
SEGMENT_FOOT_MAG * 1.2 + 2. * SEGMENT_FOOT_RAD))
node.addGeom(
'MyFoot3',
[SEGMENT_FOOT_MAG * np.array([+.6, 0., 0.]),
mm.exp([0.] * 3)],
ypc.CapsuleMaterial(
capsulDensity, SEGMENT_FOOT_RAD,
SEGMENT_FOOT_MAG * 1.2 + 2. * SEGMENT_FOOT_RAD))
node.jointType = footJointType
capsulize('LeftFoot_foot_0_1')
node = mcfg.getNode('LeftFoot_foot_0_1')
node.addGeom(
'MyFoot3',
[np.array([0.] * 3), mm.exp([0.] * 3)],
ypc.CapsuleMaterial(capsulDensity, SEGMENT_FOOT_RAD, -1))
node.addGeom(
'MyFoot3', [
SEGMENT_FOOT_MAG * np.array([-1.2, 0., 0.]),
mm.exp([0.] * 3)
], ypc.CapsuleMaterial(capsulDensity, SEGMENT_FOOT_RAD, -1))
node.jointType = footJointType
capsulize('LeftFoot_foot_0_1_0')
node = mcfg.getNode('LeftFoot_foot_0_1_0')
node.addGeom(
'MyFoot4',
[np.array([0.] * 3), mm.exp([0.] * 3)],
ypc.CapsuleMaterial(capsulDensity, SEGMENT_FOOT_RAD, -1))
node.addGeom(
'MyFoot4', [
SEGMENT_FOOT_MAG * np.array([-1.2, 0., 0.]),
mm.exp([0.] * 3)
], ypc.CapsuleMaterial(capsulDensity, SEGMENT_FOOT_RAD, -1))
node.jointType = footJointType
capsulize('LeftFoot_foot_0_0')
node = mcfg.getNode('LeftFoot_foot_0_0')
node.addGeom(
'MyFoot3', [
SEGMENT_FOOT_MAG * np.array([0.3, 0., 2.5 * 0.25]),
mm.exp([0., math.atan2(1.2, 2.5), 0.])
],
ypc.CapsuleMaterial(
capsulDensity, SEGMENT_FOOT_RAD,
SEGMENT_FOOT_MAG * 2.5 + 2. * SEGMENT_FOOT_RAD))
node.addGeom(
'MyFoot3', [
SEGMENT_FOOT_MAG * np.array([0.3 + 1.2, 0., 2.5 * 0.25]),
mm.exp([0., math.atan2(1.2, 2.5), 0.])
],
ypc.CapsuleMaterial(
capsulDensity, SEGMENT_FOOT_RAD,
SEGMENT_FOOT_MAG * 2.5 + 2. * SEGMENT_FOOT_RAD))
node.jointType = footJointType
capsulize('LeftFoot_foot_0_0_0')
node = mcfg.getNode('LeftFoot_foot_0_0_0')
node.addGeom(
'MyFoot4',
[np.array([0.] * 3), mm.exp([0.] * 3)],
ypc.CapsuleMaterial(capsulDensity, SEGMENT_FOOT_RAD, -1))
node.addGeom(
'MyFoot4',
[SEGMENT_FOOT_MAG * np.array([1.2, 0., 0.]),
mm.exp([0.] * 3)],
ypc.CapsuleMaterial(capsulDensity, SEGMENT_FOOT_RAD, -1))
node.jointType = footJointType
capsulize('LeftFoot_foot_1_0')
node = mcfg.getNode('LeftFoot_foot_1_0')
node.addGeom(
'MyFoot3',
[SEGMENT_FOOT_MAG * np.array([-.6, 0., .0]),
mm.exp([0.] * 3)],
ypc.CapsuleMaterial(
capsulDensity, SEGMENT_FOOT_RAD,
SEGMENT_FOOT_MAG * 1.2 + 2. * SEGMENT_FOOT_RAD))
node.addGeom(
'MyFoot3',
[SEGMENT_FOOT_MAG * np.array([+.6, 0., .0]),
mm.exp([0.] * 3)],
ypc.CapsuleMaterial(
capsulDensity, SEGMENT_FOOT_RAD,
SEGMENT_FOOT_MAG * 1.2 + 2. * SEGMENT_FOOT_RAD))
node.jointType = footJointType
# parameter
config = {}
'''
config['Kt'] = 200; config['Dt'] = 2*(config['Kt']**.5) # tracking gain
config['Kl'] = 2.5; config['Dl'] = 2*(config['Kl']**.5) # linear balance gain
config['Kh'] = 1; config['Dh'] = 2*(config['Kh']**.5) # angular balance gain
config['Ks'] = 20000; config['Ds'] = 2*(config['Ks']**.5) # penalty force spring gain
config['Bt'] = 1.
config['Bl'] = 2.5
config['Bh'] = 1.
'''
config['Kt'] = 200
config['Dt'] = 2 * (config['Kt']**.5) # tracking gain
config['Kl'] = .10
config['Dl'] = 2 * (config['Kl']**.5) # linear balance gain
config['Kh'] = 0.1
config['Dh'] = 2 * (config['Kh']**.5) # angular balance gain
config['Ks'] = 15000
config['Ds'] = 2 * (config['Ks']**.5) # penalty force spring gain
config['Bt'] = 1.
config['Bl'] = 1. #0.5
config['Bh'] = 1.
#config['weightMap']={'RightArm':.2, 'RightForeArm':.2, 'LeftArm':.2, 'LeftForeArm':.2,\
#'Spine':1., 'Spine1':1., 'RightFoot':.5, 'LeftFoot':.5, 'Hips':1.5,\
#'RightUpLeg':1., 'RightLeg':1., 'LeftUpLeg':1., 'LeftLeg':1.}
#config['weightMap']={'RightArm':.2, 'RightForeArm':.2, 'LeftArm':.2, 'LeftForeArm':.2,\
#'Spine':1., 'Spine1':1., 'RightFoot':1.0, 'LeftFoot':1.0, 'Hips':1.5,\
#'RightUpLeg':2., 'RightLeg':2., 'LeftUpLeg':2., 'LeftLeg':2.}
config['weightMap'] = {
'RightArm': .2,
'RightForeArm': .2,
'LeftArm': .2,
'LeftForeArm': .2,
'Spine': .6,
'Spine1': .6,
'RightFoot': .2,
'LeftFoot': .2,
'Hips': 0.5,
'RightUpLeg': .1,
'RightLeg': .3,
'LeftUpLeg': .1,
'LeftLeg': .3
}
if SEGMENT_FOOT:
segfoot_weight = 10.
# segfoot_weight = .1
config['weightMap'] = {
'RightArm': .2,
'RightForeArm': .2,
'LeftArm': .2,
'LeftForeArm': .2,
'Spine': .6,
'Spine1': .6,
'RightFoot': .2,
'LeftFoot': .2,
'Hips': 0.5,
'RightUpLeg': .1,
'RightLeg': .3,
'LeftUpLeg': .1,
'LeftLeg': .3,
'RightFoot_foot_0_0': segfoot_weight,
'RightFoot_foot_0_1': segfoot_weight,
'RightFoot_foot_1_0': segfoot_weight,
'RightFoot_foot_1_1': segfoot_weight,
'RightFoot_foot_1_2': segfoot_weight,
'RightFoot_foot_0_0_0': segfoot_weight,
'RightFoot_foot_0_1_0': segfoot_weight,
'LeftFoot_foot_0_0': segfoot_weight,
'LeftFoot_foot_0_1': segfoot_weight,
'LeftFoot_foot_1_0': segfoot_weight,
'LeftFoot_foot_1_1': segfoot_weight,
'LeftFoot_foot_1_2': segfoot_weight,
'LeftFoot_foot_0_0_0': segfoot_weight,
'LeftFoot_foot_0_1_0': segfoot_weight
}
#config['weightMap']={'RightArm':.2, 'RightForeArm':.2, 'LeftArm':.2, 'LeftForeArm':.2,\
#'Spine':.6, 'Spine1':.6, 'RightFoot':.2, 'LeftFoot':1., 'Hips':0.5,\
#'RightUpLeg':.1, 'RightLeg':.3, 'LeftUpLeg':.5, 'LeftLeg':1.5}
#success!!
'''
config['weightMap']={'RightArm':.2, 'RightForeArm':.2, 'LeftArm':.2, 'LeftForeArm':.2,\
'Spine':.5, 'Spine1':.5, 'RightFoot':1., 'LeftFoot':1., 'Hips':0.5,\
'RightUpLeg':1., 'RightLeg':1., 'LeftUpLeg':1., 'LeftLeg':1.}
'''
#config['weightMap']={'RightArm':.2, 'RightForeArm':.2, 'LeftArm':.2, 'LeftForeArm':.2,\
#'Spine':1.5, 'LeftFoot':1., 'Hips':1.5,\
#'RightUpLeg':1., 'RightLeg':1., 'LeftUpLeg':1.5, 'LeftLeg':1.5}
config['supLink'] = 'LeftFoot'
config['supLink1'] = 'LeftFoot'
config['supLink2'] = 'RightFoot'
#config['end'] = 'Hips'
config['end'] = 'Spine1'
return motion, mcfg, wcfg, stepsPerFrame, config, frame_rate
def handle(self, e):
# print yse.Fl_Event.text[e], id(self)
# print id(Fl.focus())
returnVal = 0
if e == FL_RELEASE:
self.mouseX = Fl.event_x()
self.mouseY = Fl.event_y()
returnVal = 1
elif e == FL_PUSH:
self.mouseX = Fl.event_x()
self.mouseY = Fl.event_y()
returnVal = 1
elif e == FL_DRAG:
self.mouseX = Fl.event_x()
self.mouseY = Fl.event_y()
mouseDeltaX = self.mouseX - self.mousePrevX
mouseDeltaY = self.mouseY - self.mousePrevY
button = Fl.event_button()
if button == 1:
self.camera.rotateY -= mmMath.deg2Rad(mouseDeltaX)
if self.viewMode == VIEW_PERSPECTIVE:
self.camera.rotateX -= mmMath.deg2Rad(mouseDeltaY)
elif button == 2:
if self.viewMode != VIEW_TOP:
self.camera.center[
1] += self.camera.distance * .05 * mouseDeltaY / 12.0
elif button == 3:
# right
self.camera.center[0] -= self.camera.distance * .05 * math.cos(
self.camera.rotateY) * mouseDeltaX / 12.0
self.camera.center[
2] -= self.camera.distance * .05 * -math.sin(
self.camera.rotateY) * mouseDeltaX / 12.0
if self.viewMode == VIEW_PERSPECTIVE or self.viewMode == VIEW_TOP:
# look
self.camera.center[
0] -= self.camera.distance * .05 * math.sin(
self.camera.rotateY) * mouseDeltaY / 12.0
self.camera.center[
2] -= self.camera.distance * .05 * math.cos(
self.camera.rotateY) * mouseDeltaY / 12.0
returnVal = 1
self.redraw()
elif e == FL_MOUSEWHEEL:
if self.wheelWork:
self.camera.distance -= self.camera.distance * .2 * Fl.event_dy(
) / 3.0
# self.camera.distance -= Fl.event_dy() / 3.0
if self.camera.distance < 0.0001:
self.camera.distance = 0.0001
self.projectionChanged = True
returnVal = 1
self.redraw()
# elif e == FL_ENTER:
## Fl.focus(self)
# returnVal = 1
# elif e == FL_FOCUS:
# returnVal = 1
elif e == FL_KEYUP:
if Fl.event_key() == ord('1'):
self.viewFromFront()
elif Fl.event_key() == ord('2'):
self.viewFromRight()
elif Fl.event_key() == ord('3'):
self.viewFromTop()
elif Fl.event_key() == ord('4'):
self.viewPerspective()
elif Fl.event_key() == ord('6'):
self.event_handle(1)
elif Fl.event_key() == ord('7'):
self.event_handle(2)
elif Fl.event_key() == ord('8'):
self.event_handle(3)
elif Fl.event_key() == ord('9'):
self.event_handle(4)
elif Fl.event_key() == ord('0'):
self.event_handle(5)
# elif Fl.event_key()==ord('f'):
# self.event_handle(5)
# elif Fl.event_key()==ord('g'):
# self.event_handle(6)
# elif Fl.event_key()==ord('v'):
# self.event_handle(7)
# elif Fl.event_key()==ord('c'):
# self.event_handle(8)
# elif Fl.event_key()==ord('d'):
# self.event_handle(9)
returnVal = 0
self.redraw()
self.mousePrevX = self.mouseX
self.mousePrevY = self.mouseY
# if returnVal == 1:
# self.redraw()
return returnVal