def __init__(self, qpd, stage, lock_fn, min_sum, z_center, slow_stage = False, parent = None):
QtCore.QThread.__init__(self, parent)
self.qpd = qpd
self.stage = stage
self.lock_fn = lock_fn
self.sum_min = min_sum
self.count = 0
self.debug = 1
self.find_sum = False
self.locked = 0
self.max_pos = 0
self.max_sum = 0
self.offset = 0
self.qpd_mutex = QtCore.QMutex()
self.running = 1
self.slow_stage = slow_stage
self.stage_mutex = QtCore.QMutex()
self.stage_z = z_center - 1.0
self.sum = 0
self.target = None
self.unacknowledged = 1
self.z_center = z_center
self.requested_sum = 0
def __init__(self, parent=None):
QtCore.QThread.__init__(self, parent)
self.buffer = []
self.buffer_mutex = QtCore.QMutex()
self.aotf_mutex = QtCore.QMutex()
self.running = 1
self.aotf = False
def __init__(self, parameters, parent):
QtCore.QThread.__init__(self, parent)
AmplitudeModulation.__init__(self, parameters, parent)
self.command_buffer = []
self.buffer_mutex = QtCore.QMutex()
self.device_mutex = QtCore.QMutex()
self.is_buffered = True
self.running = True
def __init__(self, sdevice, parent=None):
QtCore.QThread.__init__(self, parent)
self.buffer = []
self.buffer_mutex = QtCore.QMutex()
self.sdevice_mutex = QtCore.QMutex()
self.running = 1
self.sdevice = sdevice
if not (self.sdevice.getStatus()):
self.sdevice.shutDown()
self.sdevice = False
def __init__(self, parent=None):
QtCore.QThread.__init__(self, parent)
self.buffer = []
self.buffer_mutex = QtCore.QMutex()
self.aotf_mutex = QtCore.QMutex()
self.running = 1
# connect to the AOTF
global have_aotf
if have_aotf:
self.aotf = AOTF.AOTF()
if not (self.aotf.getStatus()):
self.aotf = 0
else:
self.aotf = 0
def __init__(self, parent=None):
QtCore.QThread.__init__(self, parent)
self.buffer = []
self.buffer_mutex = QtCore.QMutex()
self.cube_mutex = QtCore.QMutex()
self.running = 1
global have_cube
if have_cube:
self.cube = cube405.Cube405()
if not (self.cube.getStatus()):
self.cube.shutDown()
self.cube = 0
else:
self.cube = 0
def __init__(self, _viewManager=None, _plotSupportFlag=False):
QtCore.QObject.__init__(self, None)
self.vm = _viewManager
self.plotsSupported = _plotSupportFlag
self.plotWindowList = []
self.plotWindowMutex = QtCore.QMutex()
self.signalsInitialized = False
def __init__(self, MainWindow):
self.setupUi(MainWindow)
self.MainWindow = MainWindow
self.show_plc_addrs = []
self.show_plc_vals = []
self.write_plc_addrs = []
self.write_plc_vals = []
self.create_ui_container()
self.show_plc_ip.activated[str].connect(self.on_show_plc_change)
self.write_plc_ip.activated[str].connect(self.on_write_plc_change)
self.update_show_plc_addr.clicked.connect(self.on_update_show_plc_addr)
self.submit_write_vals.clicked.connect(self.on_submit_write_vals)
self.action_conn_PLC.setStatusTip('链接到PLC,只会链接到没有链接的PLC')
self.action_conn_PLC.triggered.connect(self.on_conn_plc)
self.action_close_PLC.setStatusTip('断开和所有PLC的链接')
self.action_close_PLC.triggered.connect(self.on_close_plc)
self.action_Exit.setStatusTip('退出应用')
self.action_Exit.triggered.connect(self.on_exit)
self.action_Help.setStatusTip('打开帮助')
self.action_Help.triggered.connect(self.on_help)
self.action_About.setStatusTip('关于')
self.action_About.triggered.connect(self.on_about)
self.icon = QtGui.QIcon()
self.icon.addPixmap(QtGui.QPixmap('image/singleM.ico'), QtGui.QIcon.Normal, QtGui.QIcon.Off)
self.mutex = QtCore.QMutex()
self.checkConfig()
self.checkDonThread = CheckDonThread(self)
self.MainWindow.connect(self.checkDonThread, QtCore.SIGNAL('check_don_result'), self.check_don_result)
self.checkDonThread.start()
self.run_socket_service()
if self.autoConn:
self.on_conn_plc()
def __init__(self,parent=None):
QtCore.QThread.__init__(self,parent)
self.msg = ''
self.mt_stop = False
self.mt_pause = False
self.mutex = QtCore.QMutex()
self.mt_pauseCondition = QtCore.QWaitCondition()
def __init__(self, dag, parent):
QtCore.QThread.__init__(self, parent)
self.dag = dag
self._abort = False
self._stop = False
self._mutex = QtCore.QMutex()
self._condition = QtCore.QWaitCondition()
def __init__(self, hardware, parameters, parent = None):
QtCore.QThread.__init__(self, parent)
# Other class initializations
self.acquire = IdleActive()
self.frame_number = 0
self.key = -1
self.mutex = QtCore.QMutex()
self.parameters = parameters
self.running = True
self.shutter = False
# Camera initialization
self.camera = False
self.got_camera = False
self.reversed_shutter = False
self.parameters.add("camera1.save", params.ParameterSetBoolean("",
"save",
True,
is_mutable = False,
is_saved = False))
self.parameters.add("camera1.x_pixels", params.ParameterInt("",
"x_pixels",
1,
is_mutable = False,
is_saved = True))
self.parameters.add("camera1.y_pixels", params.ParameterInt("",
"y_pixels",
1,
is_mutable = False,
is_saved = True))
def __init__(self, hardware, parameters, parent = None):
lock_fn = lambda(x): 0.05*x
# The numpy fitting routine is apparently not thread safe.
fit_mutex = QtCore.QMutex()
# Lower objective camera and piezo.
cam1 = uc480Cam.CameraQPD300(camera_id = 2,
fit_mutex = fit_mutex)
stage1 = mclController.MCLStage("c:/Program Files/Mad City Labs/NanoDrive/",
serial_number = 2636)
control_thread1 = stageOffsetControl.StageCamThread(cam1,
stage1,
lock_fn,
50.0,
parameters.get("qpd_zcenter"))
# Upper objective camera and piezo.
cam2 = uc480Cam.CameraQPD300(camera_id = 3,
fit_mutex = fit_mutex)
stage2 = mclController.MCLStage("c:/Program Files/Mad City Labs/NanoDrive/",
serial_number = 2637)
control_thread2 = stageOffsetControl.StageCamThread(cam2,
stage2,
lock_fn,
50.0,
parameters.get("qpd_zcenter"))
ir_laser = LDC210.LDC210PWMLJ()
focusLockZ.FocusLockZDualCam.__init__(self,
parameters,
[control_thread1, control_thread2],
[ir_laser, False],
parent)
def __init__(self, timeout=None):
""" constructor
:param timeout: timeout for setting connection in ms
:type timeout: :obj:`int`
"""
BaseSource.__init__(self, timeout)
#: (:obj:`str`) hidra port number
self.__portnumber = "50001"
#: (:obj:`str`) hidra client server
self.__targetname = socket.getfqdn()
#: (:obj:`str`) server host
self.__shost = None
#: (:obj:`list` < :obj:`str`, :obj:`str`,
#: :obj:`int` :obj:`list` < :obj:`str`> >) hidra target:
#: [host name, portnumber, priority, a list of extensions]
self.__target = [
self.__targetname, self.__portnumber, 19,
[".cbf", ".tif", ".tiff"]
]
#: (:class:`hidra.transfer.Transfer`) hidra query
self.__query = None
#: (:class:`PyQt4.QtCore.QMutex`) zmq bind address
self.__mutex = QtCore.QMutex()
def __init__(self, widget, oneShotEnable=True):
"""
Instantiate a newly opened output
"""
QtCore.QObject.__init__(self)
# our output queue
self._queue = Queue.Queue(0)
# for counting
self._lock = QtCore.QMutex()
self._count = 0
# the controlling widget
self._widget = widget
# our input queue
self._inputQueue = None
# whether we are primed
self._recording = False
if oneShotEnable:
# automatically shut off streaming when counter hits zero
self.connect(self, QtCore.SIGNAL('countDone()'),
self.stopRecording)
if self._widget:
# allow the widget to know whether recording was stopped
self.connect(self, QtCore.SIGNAL('recordingChanged(bool)'),
self._widget.setRecording)
# allow the widget to know whether the count was changed
self.connect(self, QtCore.SIGNAL('countChanged(int)'),
self._widget.setCount)
# allow the widget to access the input
self.connect(self._widget, QtCore.SIGNAL('recordingChanged(bool)'),
self.setRecording)
self.connect(self._widget, QtCore.SIGNAL('countChanged(int)'),
self.setCount)
def __init__(self):
super(Player, self).__init__()
self.mutex = QtCore.QMutex()
self.condition = QtCore.QWaitCondition()
self.allow_play = False
if not self.isRunning():
self.start(QtCore.QThread.LowPriority)
def __init__(self, directory, parent=None):
super(ImportThread, self).__init__(parent)
self.directory = directory
self.mutex = QtCore.QMutex()
self.condition = QtCore.QWaitCondition()
self.filenames = QtCore.QStringList()
self.abort = False
def run(self):
print('Main program run...')
self.o_printLock = QtCore.QMutex()
self.t_controllers = []
t_waitingTime = [ 6.,5.,7.]
for i in range(3):
o_controller = QArkWorkerThreadController(_cls_worker=MyWorker
, _t_workerParameters={'wid':i,'wait':t_waitingTime[i],'print_lock':self.o_printLock}
, _o_exceptionHandler=self.getExceptionHandler()
, _b_selfIO=False
)
o_controller.workerError.connect(self.handleErrorHandledSlot)
o_controller.workerFinished.connect(self.handleWorkerHasFinished)
o_controller.writeStdOutRequest.connect(self.handleMessageSentSlot)
self.t_controllers.append(o_controller)
#o_timerInterruptCtrl2 = QtCore.QTimer()
#o_timerInterruptCtrl2.start(int(0.2 * t_waitingTime[2] * 1000))
#o_timerInterruptCtrl2.timeout.connect(self.simuUserInterrupt)
for o_ctrl in self.t_controllers:
print_lock('start {}'.format(o_ctrl), self.o_printLock)
o_ctrl.startThread()
def __init__(self,
n,
model,
pt,
aa,
algo,
use_heur=False,
worst=None,
best=None,
parent=None):
super(qt_thread_algo, self).__init__(parent)
self.mutex = QtCore.QMutex()
self.stopped = False
self.results = []
self.fitness = []
self.model = model.copy()
self.n = n
self.ncrit = len(model.criteria)
self.ncat = len(model.categories)
self.pt = pt
self.aa = aa
self.worst = worst
self.best = best
self.algo = algo
self.use_heur = use_heur
def __init__(self, app, parent=None):
apport.ui.UserInterface.__init__(self)
QtGui.QWidget.__init__(self, parent)
self.ui = Ui_bugtoolUI()
self.ui.setupUi(self)
self.active_widgets = []
self.screenData = None
self.moveInc = 1
self.app = app
self.app.setQuitOnLastWindowClosed(True)
self.running = True
self.is_active = False
self.waitNextClick = QtCore.QWaitCondition()
self.mutex = QtCore.QMutex()
QtCore.QObject.connect(self.ui.buttonNext, QtCore.SIGNAL("clicked()"),
self.slotNext)
QtCore.QObject.connect(self.ui.buttonCancel,
QtCore.SIGNAL("clicked()"), self.closeEvent)
# Forcing show() on __init__() since run_argv() may block the UI
self.show()
rect = QtGui.QDesktopWidget().screenGeometry()
self.move(rect.width()/2 - self.width()/2, rect.height()/2 -\
self.height()/2)
#self.app.exec_()
self.run_argv()
def __init__(self, video_engine, parent=None):
# Set up to sync with double-buffer, vertical refresh. Add Alpha and Depth buffers.
fmt = QtOpenGL.QGLFormat()
fmt.setSwapInterval(2)
fmt.setDoubleBuffer(True)
fmt.setAlpha(True)
fmt.setDepth(True)
QtOpenGL.QGLWidget.__init__(self, fmt, parent)
# set application settings
self.settings = LuxSettings()
# create a mutex for the state
self.lock = QtCore.QMutex()
# height and width of viewport
self.width = 512
self.height = 512
# set dirty state
self.dirty = True
# start up an update timer
self.timerId = self.startTimer(30)
# whether GL is initialized
self.initialized = False
# Start the simulator audio client. Connects to JACK server,
# which must be running.
self.makeCurrent()
self.video_engine = video_engine
def __init__(self,
user_id,
password,
start_date,
end_date=None,
query_dict=None,
category_tree=None,
parent=None):
super(PiggyBanker, self).__init__(parent)
self.mutex = QtCore.QMutex()
self.condition = QtCore.QWaitCondition()
self.user_id = user_id
self.password = password
self.sleeper = 10
self.start_date = start_date
if query_dict is None:
#get all data for a writer between dates if only dates are given.
self.query_dict = {"WriterID": self.user_id}
else:
#If some query dictionary is supplied, get all data corresponding to that.
self.query_dict = query_dict
if end_date is None:
self.end_date = self.start_date
else:
self.end_date = end_date
if category_tree is None:
self.category_tree = MOSES.getCategoryTree(self.user_id,
self.password)
else:
self.category_tree = category_tree
if not self.isRunning():
self.start(QtCore.QThread.LowPriority)
def __init__(self, parent=None):
""" constructor
:param parent: parent object
:type parent: :class:`PyQt4.QtCore.QObject`
"""
BaseSourceWidget.__init__(self, parent)
self._ui = _zmqformclass()
self._ui.setupUi(self)
#: (:obj:`str`) source name
self.name = "ZMQ Stream"
#: (:obj:`str`) datasource class name
self.datasource = "ZMQSource"
#: (:obj:`list` <:obj:`str`>) subwidget object names
self.widgetnames = [
"pickleLabel", "pickleLineEdit", "pickleTopicLabel",
"pickleTopicComboBox"
]
#: (:obj:`list` <:obj:`str`> >) zmq source datasources
self.__zmqtopics = []
#: (:obj:`bool`) automatic zmq topics enabled
self.__autozmqtopics = False
#: (:class:`PyQt4.QtCore.QMutex`) zmq datasource mutex
self.__mutex = QtCore.QMutex()
self._detachWidgets()
self._ui.pickleLineEdit.textEdited.connect(self.updateButton)
self._ui.pickleTopicComboBox.currentIndexChanged.connect(
self._updateZMQComboBox)
def __init__(self,
com_port,
baudrate=115200,
timeout=0.001,
parent=None,
verbose=False):
QtCore.QThread.__init__(self, parent)
# Create serial port
self.com = serial.Serial(port=com_port,
baudrate=baudrate,
timeout=timeout)
self.verbose = verbose # For debugging purposes
self.running = True # Flag for running the loop
# Create a com port mutex
self.com_mutex = QtCore.QMutex()
# Maximum number of reads to check for a com response
self.max_num_reads = 10
self.pause_time = 0.1 # time in seconds to wait between com checks for response
if self.verbose:
print "Created W1 Serial Thread"
def __init__(self):
super(Worker, self).__init__()
self._abort = False
self._interrupt = False
self._method = "none"
self.mutex = QtCore.QMutex()
self.condition = QtCore.QWaitCondition()
class FileWatcher(QtCore.QThread):
mutex = QtCore.QMutex()
def __init__(self,parent=None,target=""):
super(FileWatcher,self).__init__(parent)
self.stopped = False
self.last_ts = 0.0
self.targetfile = target
def run(self):
setup = Setup.Setup()
with Logger.Logger(setup.SLOWMONITOR_LOG) as logger:
logger.logger.info("file watch thread is running...")
while not self.stopped:
timestamp = os.stat(self.targetfile).st_mtime
if timestamp == self.last_ts: pass
elif timestamp > self.last_ts:
self.last_ts = timestamp
self.finished.emit()
else:
with Logger.Logger(setup.SLOWMONITOR_LOG) as logger:
logger.logger.error("FileWatcher: timestamp shows the past to the last one.")
time.sleep(setup.ALARM_TIME_FILEWATCH)
with Logger.Logger(setup.SLOWMONITOR_LOG) as logger:
logger.logger.warning("sound thread is stopped.")
def stop(self):
with QtCore.QMutexLocker(self.mutex):
self.stopped = True
def setup(self):
with QtCore.QMutexLocker(self.mutex):
self.stopped = False
def __init__(self, lock, parent = None):
super(MoxaSetupThread, self).__init__(parent)
self.lock = lock
self.mutex = QtCore.QMutex()
self.stopped = False
self.completed = False
self.assign = False
def __init__(self, dialog, parent=None):
super(ClientThread, self).__init__(parent)
self.dialog = dialog
self.getParametersFromDialog()
self.mutex = QtCore.QMutex()
self.reset = False
self.abort = False
def init():
global DC
sys.path.append(os.path.join(config.daemonDir, 'util'))
import daemon_control as DC
global DAEMON_SOCK, DAEMON_MUTEX, ERR_MSG
DAEMON_SOCK = DC.get_daemon_control_sock(retry=True, max_retries=200)
DAEMON_MUTEX = QtCore.QMutex()
ERR_MSG = {
DC.ControlResErr.NO_DNODE:
'NO_DNODE: No datanode connected',
DC.ControlResErr.DAEMON:
'DAEMON: Internal daemon error',
DC.ControlResErr.DAEMON_IO:
'DAEMON_IO: Daemon I/O error',
DC.ControlResErr.C_VALUE:
'C_VALUE: Invalid arguments on client control socket',
DC.ControlResErr.C_PROTO:
'C_PROTO: Protocol error on client control socket',
DC.ControlResErr.D_PROTO:
'D_Proto: Protocol error on datanode control socket',
DC.ControlResErr.DNODE:
'DNODE: Datanode transaction failed',
DC.ControlResErr.DNODE_ASYNC:
'DNODE_ASYNC: Asynchronous datanode error',
DC.ControlResErr.DNODE_DIED:
'DNODE_DIED: Datanode connection died while processing request'
}
global INITIALIZED
INITIALIZED = True
def __init__(self, job_changer):
self.__work = {}
self.__i = 0
self.__jobChanger = job_changer
self.__mutex = QtCore.QMutex()
self.__thread = None
self.__finish_func = None
def __init__(self, bucketName, key, parent=None):
self.emitter = QtCore.QObject()
QtCore.QRunnable.__init__(self)
self.bucketName = bucketName
self.key = key
self.filePath = None
self.mutex = QtCore.QMutex()