print(List)
for i in range(0, len(List)):
print(List[i])
print('0x40--' + hex(lora.get_register(0x40)))
print('0x41--' + hex(lora.get_register(0x41)))
print('0x42--' + hex(lora.get_register(0x42)))
while True:
if GPIO.input(BOARD.DIO0) == 1:
lora.set_register(0x12, 0xff) #将GPIO清0
# print(GPIO.input(BOARD.DIO0))
flags = lora.get_irq_flags()
# print(flags)
rx_nb_bytes = lora.get_rx_nb_bytes()
# print(rx_nb_bytes)
rx_addr = lora.get_fifo_rx_current_addr()
# print(rx_addr)
payload = []
payload = lora.read_payload()
PrintList = []
for i in range(0, len(payload)):
PrintList.append(hex(payload[i]))
print(PrintList)
else:
time.sleep(0.1)
class LoraServer(QThread):
signal = pyqtSignal(str)
signal_newLock = pyqtSignal(MyLock)
signal_Lock = pyqtSignal(MyLock)
def __init__(self):
super(LoraServer,self).__init__()
MyLog.debug('LoraServer in')
BOARD.setup()
self.lora = LoRa()
self.LoraServer_init(self.lora)
self.WaitCarComeTime = int(120) # 等待车子停进来的时间，2min不来就升锁
self.WaitCarLeaveTime = int(300) # 车子停进来前5min，依旧是2min升锁，超出时间立刻升锁
self.AfterCarLeaveTime = int(10) # 超出5min，认为车子是要走了，1min升锁
try:
cf = configparser.ConfigParser()
cf.read(path.expandvars('$HOME') + '/Downloads/WWTFrontServer_Lora/Configuration.ini', encoding="utf-8-sig")
self.WaitCarComeTime = cf.getint("StartLoad", "WaitCarComeTime")
self.WaitCarLeaveTime = cf.getint("StartLoad", "WaitCarLeaveTime")
self.AfterCarLeaveTime = cf.getint("StartLoad", "AfterCarLeaveTime")
except Exception as ex:
MajorLog(ex + 'From openfile /waitcartime')
MyLog.debug("WaitCarComeTime:" + str(self.WaitCarComeTime))
MyLog.debug("WaitCarLeaveTime:" + str(self.WaitCarLeaveTime))
MyLog.debug("AfterCarLeaveTime:" + str(self.AfterCarLeaveTime))
global stridList
stridList = []
self.mtimer = QTimer()
self.mtimer.timeout.connect(self.LockAutoDown)
self.mtimer.start(1000)
self.mtimer2 = QTimer()
self.mtimer2.timeout.connect(self.WaitCarStatusDisable)
self.mtimer2.start(1000)
pass
def LoraServer_init(self,lora):
print("LoraServer start init----")
lora.set_mode(MODE.STDBY)
lora.set_dio_mapping([0,0,0,0,0,0])
print(lora.get_freq())
lora.set_freq(478.0)
lora.set_coding_rate(CODING_RATE.CR4_6)
lora.set_rx_crc(1)
lora.set_register(0x1E, 0x94)
print(hex(lora.get_register(0x1E)))
lora.set_register(0x12, 0xff)
lora.set_mode(MODE.RXCONT)
lora.set_mode(MODE.RXCONT)
lora.set_mode(MODE.RXCONT)
value = lora.get_all_registers()
print(value)
print(len(value))
List = []
for i in range(0, len(value)):
List.append(hex(i) + '--' + hex(value[i]))
print(List)
for i in range(0, len(List)):
print(List[i])
print('0x40--' + hex(lora.get_register(0x40)))
print('0x41--' + hex(lora.get_register(0x41)))
print('0x42--' + hex(lora.get_register(0x42)))
print("LoraServer finish init----")
def LoraServer_write(self,payload):
self.lora.set_mode(MODE.STDBY)
self.lora.set_dio_mapping([1, 0, 0, 0, 0, 0])
self.lora.set_pa_config(pa_select=1)
self.lora.clear_irq_flags(TxDone=1)
# payload1 = [0xEB, 0x90, 0x14, 0x0B, 0xFF, 0xFF, 0xFF, 0xFF, 0x05, 0x10, 0x02, 0xFF, 0x00, 0x29, 0xC1]
# payload2 = [0xEB, 0x90, 0x14, 0x0B, 0xFF, 0xFF, 0xFF, 0xFF, 0x05, 0x10, 0x03, 0xFF, 0x00, 0x29, 0xC0]
# payload3 = [0xEB, 0x90, 0x14, 0x0A, 0xFF, 0xFF, 0xFF, 0xFF, 0x04, 0x20, 0x02, 0x00, 0x03, 0x25]
self.lora.write_payload(payload)
self.lora.set_mode(MODE.TX)
self.lora.set_mode(MODE.STDBY)
self.lora.set_dio_mapping([0,0,0,0,0,0])
self.lora.set_mode(MODE.RXCONT)
def LoraServer_read(self):
self.lora.set_register(0x12, 0xff) # 将GPIO清0
flags = self.lora.get_irq_flags()
rx_nb_bytes = self.lora.get_rx_nb_bytes()
rx_addr = self.lora.get_fifo_rx_current_addr()
payload = self.lora.read_payload()
PrintList = []
for i in range(0, len(payload)):
PrintList.append(hex(payload[i]))
print(PrintList)
return payload
def LockAutoDown(self): # 定时器调用，检测无车满60s后自动发送升锁指令
for lock in SharedMemory.LockList:
if lock.arm == '10':
if lock.car == '00':
lock.nocaron += 1
else:
lock.nocaron = 0
if lock.nocaron >= self.WaitCarComeTime and lock.waitcar == False: # 降锁后等待车子来停
lock.nocaron = 0
self.sendToCan(lock.addr + '02')
lock.carLeave = datetime.now()
lock.reservd2 = datetime.strftime(lock.carLeave, '%Y-%m-%d %H:%M:%S')
lock.carStayTime = (str(lock.carLeave - lock.carCome).split('.'))[0]
lock.reservd3 = lock.carStayTime
self.signal_Lock.emit(lock)
t.sleep(0.05)
if lock.nocaron >= self.AfterCarLeaveTime and lock.carFinallyLeave == True: # 车子离开等待60s就升锁
lock.carFinallyLeave = True
lock.nocaron = 0
self.sendToCan(lock.addr + '02')
t.sleep(5)
if lock.arm == '10':
self.LockUp(lock.addr)
t.sleep(5)
if lock.arm == '10':
self.LockUp(lock.addr)
t.sleep(5)
if lock.arm == '01':
lock.carLeave = datetime.now()
lock.reservd2 = datetime.strftime(lock.carLeave, '%Y-%m-%d %H:%M:%S')
lock.carStayTime = (str(lock.carLeave - lock.carCome).split('.'))[0]
lock.reservd3 = lock.carStayTime
self.signal_Lock.emit(lock)
t.sleep(0.05)
else: # 连续多次未判断到升锁到位，认为出现故障
lock.machine = '88'
pass
if lock.arm == '01' or lock.arm == '00':
lock.nocaron = 0
pass
def WaitCarStatusDisable(self):
for lock in SharedMemory.LockList:
if lock.waitcar == True:
lock.waitcartime += 1
if lock.carFinallyLeave == False:
lock.waitcartime2 += 1
if lock.waitcartime >= self.WaitCarComeTime:
lock.waitcar = False
lock.waitcartime = 0
if lock.waitcartime2 >= self.WaitCarLeaveTime:
lock.carFinallyLeave = True
lock.waitcartime2 = 0
pass
def run(self):
MyLog.debug("LoraServer run ")
self.ThreadTag = True
t = threading.Thread(target=ServerOn,args=(self,))
t.start()
def LockUp(self, addr):
buf = [0xEB, 0x90, 0x14, 0x0A,
int(addr[0:2],16),int(addr[2:4],16),int(addr[4:6],16),int(addr[6:8],16),
0x05, 0x10, 0x02, 0xFF, 0x00, 0x00]
print(buf)
self.LoraServer_write(buf)
MyLog.info("LockUp"+addr)
def LockDown(self, addr):
buf = [0xEB, 0x90, 0x14, 0x0A,
int(addr[0:2],16),int(addr[2:4],16),int(addr[4:6],16),int(addr[6:8],16),
0x05, 0x10, 0x03, 0xFF, 0x00, 0x00]
self.LoraServer_write(buf)
MyLog.info('LockDown:' + addr)
for lock in SharedMemory.LockList:
if lock.addr == addr:
lock.waitcar = True
lock.waitcartime = 0
lock.waitcartime2 = 0
lock.carCome = datetime.now()
lock.reservd1 = datetime.strftime(lock.carCome,'%Y-%m-%d %H:%M:%S')
lock.reservd2 = ''
lock.reservd3 = ''
lock.carFinallyLeave = False
self.signal_Lock.emit(lock)
def LockCMDExcute(self, str):
MyLog.debug("触发Lockcmdexcute")
if len(str) == 10:
addr = str[0:8]
cmd = str[8:10]
if cmd == '02':
self.LockUp(addr)
elif cmd == '03':
self.LockDown(addr)
else:
# to do other things here
pass
else:
MyLog.error("FrontServer-->Lock的控制指令长度不正确")
pass
def LockCMDExcute2(self, str):
MyLog.debug("触发Lockcmdexcute2 本地点击"+str)
if len(str) == 10:
addr = str[2:10]
cmd = str[0:2]
if cmd == '02':
self.LockUp(addr)
MyLog.info("本地点击升锁！")
elif cmd == '03':
self.LockDown(addr)
MyLog.info("本地点击降锁！")
elif cmd == '04':
buf = [int(addr[0:2], 16), int(addr[2:4], 16), int(addr[4:6], 16), int(addr[6:8], 16), 4]
self.mcp2515_write(buf)
MyLog.info("EnableAlarm" + addr)
elif cmd == '05':
buf = [int(addr[0:2], 16), int(addr[2:4], 16), int(addr[4:6], 16), int(addr[6:8], 16), 5]
self.mcp2515_write(buf)
MyLog.info("DisableAlarm" + addr)
elif cmd == '06':
buf = [int(addr[0:2], 16), int(addr[2:4], 16), int(addr[4:6], 16), int(addr[6:8], 16), 6]
self.mcp2515_write(buf)
MyLog.info("LockReset" + addr)
else:
# to do other things here
pass
else:
MyLog.error("FrontServer-->Lock的控制指令长度不正确")
pass