def MagneticsDiffSecondaryInv(mesh, model, data, **kwargs):
"""
Inversion module for MagneticsDiffSecondary
"""
from SimPEG import Optimization, Regularization, Parameters, ObjFunction, Inversion
prob = MagneticsDiffSecondary(mesh, model)
miter = kwargs.get('maxIter', 10)
if prob.ispaired:
prob.unpair()
if data.ispaired:
data.unpair()
prob.pair(data)
# Create an optimization program
opt = Optimization.InexactGaussNewton(maxIter=miter)
opt.bfgsH0 = Solver(sp.identity(model.nP), flag='D')
# Create a regularization program
reg = Regularization.Tikhonov(model)
# Create an objective function
beta = Parameters.BetaSchedule(beta0=1e0)
obj = ObjFunction.BaseObjFunction(data, reg, beta=beta)
# Create an inversion object
inv = Inversion.BaseInversion(obj, opt)
return inv, reg
def setUp(self):
cs = 25.
hx = [(cs, 0, -1.3), (cs, 21), (cs, 0, 1.3)]
hz = [(cs, 0, -1.3), (cs, 20)]
mesh = Mesh.TensorMesh([hx, hz], x0="CN")
blkind0 = Utils.ModelBuilder.getIndicesSphere(np.r_[-100., -200.], 75.,
mesh.gridCC)
blkind1 = Utils.ModelBuilder.getIndicesSphere(np.r_[100., -200.], 75.,
mesh.gridCC)
sigma = np.ones(mesh.nC) * 1e-2
eta = np.zeros(mesh.nC)
tau = np.ones_like(sigma) * 1.
eta[blkind0] = 0.1
eta[blkind1] = 0.1
tau[blkind0] = 0.1
tau[blkind1] = 0.1
x = mesh.vectorCCx[(mesh.vectorCCx > -155.) & (mesh.vectorCCx < 155.)]
Aloc = np.r_[-200., 0.]
Bloc = np.r_[200., 0.]
M = Utils.ndgrid(x - 25., np.r_[0.])
N = Utils.ndgrid(x + 25., np.r_[0.])
times = np.arange(10) * 1e-3 + 1e-3
rx = SIP.Rx.Dipole(M, N, times)
src = SIP.Src.Dipole([rx], Aloc, Bloc)
survey = SIP.Survey([src])
wires = Maps.Wires(('eta', mesh.nC), ('taui', mesh.nC))
problem = SIP.Problem2D_CC(mesh,
rho=1. / sigma,
etaMap=wires.eta,
tauiMap=wires.taui,
verbose=False)
problem.Solver = Solver
problem.pair(survey)
mSynth = np.r_[eta, 1. / tau]
problem.model = mSynth
survey.makeSyntheticData(mSynth)
# Now set up the problem to do some minimization
dmis = DataMisfit.l2_DataMisfit(survey)
reg = Regularization.Tikhonov(mesh)
opt = Optimization.InexactGaussNewton(maxIterLS=20,
maxIter=10,
tolF=1e-6,
tolX=1e-6,
tolG=1e-6,
maxIterCG=6)
invProb = InvProblem.BaseInvProblem(dmis, reg, opt, beta=1e4)
inv = Inversion.BaseInversion(invProb)
self.inv = inv
self.reg = reg
self.p = problem
self.mesh = mesh
self.m0 = mSynth
self.survey = survey
self.dmis = dmis
def setUp(self, parallel=False):
frequency = np.array([900, 7200, 56000], dtype=float)
hz = np.r_[1.]
n_sounding = 10
dx = 20.
hx = np.ones(n_sounding) * dx
e = np.ones(n_sounding)
mSynth = np.r_[e * np.log(1. / 100.), e * 20]
x = np.arange(n_sounding)
y = np.zeros_like(x)
z = np.ones_like(x) * 30.
rx_locations = np.c_[x, y, z]
src_locations = np.c_[x, y, z]
topo = np.c_[x, y, z - 30.].astype(float)
wires = Maps.Wires(('sigma', n_sounding), ('h', n_sounding))
expmap = Maps.ExpMap(nP=n_sounding)
sigmaMap = expmap * wires.sigma
survey = GlobalEM1DSurveyFD(rx_locations=rx_locations,
src_locations=src_locations,
frequency=frequency,
offset=np.ones_like(frequency) * 8.,
src_type="VMD",
rx_type="ppm",
field_type='secondary',
topo=topo,
half_switch=True)
problem = GlobalEM1DProblemFD([],
sigmaMap=sigmaMap,
hMap=wires.h,
hz=hz,
parallel=parallel,
n_cpu=2)
problem.pair(survey)
survey.makeSyntheticData(mSynth)
# Now set up the problem to do some minimization
mesh = Mesh.TensorMesh([int(n_sounding * 2)])
dmis = DataMisfit.l2_DataMisfit(survey)
reg = Regularization.Tikhonov(mesh)
opt = Optimization.InexactGaussNewton(maxIterLS=20,
maxIter=10,
tolF=1e-6,
tolX=1e-6,
tolG=1e-6,
maxIterCG=6)
invProb = InvProblem.BaseInvProblem(dmis, reg, opt, beta=0.)
inv = Inversion.BaseInversion(invProb)
self.inv = inv
self.reg = reg
self.p = problem
self.mesh = mesh
self.m0 = mSynth * 1.2
self.survey = survey
self.dmis = dmis
def setUp(self, parallel=True):
frequency = np.array([900, 7200, 56000], dtype=float)
hz = get_vertical_discretization_frequency(
frequency, sigma_background=1./10.
)
n_sounding = 10
dx = 20.
hx = np.ones(n_sounding) * dx
mesh = Mesh.TensorMesh([hx, hz], x0='00')
inds = mesh.gridCC[:, 1] < 25
inds_1 = mesh.gridCC[:, 1] < 50
sigma = np.ones(mesh.nC) * 1./100.
sigma[inds_1] = 1./10.
sigma[inds] = 1./50.
sigma_em1d = sigma.reshape(mesh.vnC, order='F').flatten()
mSynth = np.log(sigma_em1d)
x = mesh.vectorCCx
y = np.zeros_like(x)
z = np.ones_like(x) * 30.
rx_locations = np.c_[x, y, z]
src_locations = np.c_[x, y, z]
topo = np.c_[x, y, z-30.].astype(float)
mapping = Maps.ExpMap(mesh)
survey = GlobalEM1DSurveyFD(
rx_locations=rx_locations,
src_locations=src_locations,
frequency=frequency,
offset=np.ones_like(frequency) * 8.,
src_type="VMD",
rx_type="Hz",
field_type='secondary',
topo=topo
)
problem = GlobalEM1DProblemFD(
[], sigmaMap=mapping, hz=hz,
parallel=parallel, n_cpu=5
)
problem.pair(survey)
survey.makeSyntheticData(mSynth)
# Now set up the problem to do some minimization
dmis = DataMisfit.l2_DataMisfit(survey)
reg = Regularization.Tikhonov(mesh)
opt = Optimization.InexactGaussNewton(
maxIterLS=20, maxIter=10, tolF=1e-6,
tolX=1e-6, tolG=1e-6, maxIterCG=6
)
invProb = InvProblem.BaseInvProblem(dmis, reg, opt, beta=0.)
inv = Inversion.BaseInversion(invProb)
self.inv = inv
self.reg = reg
self.p = problem
self.mesh = mesh
self.m0 = mSynth
self.survey = survey
self.dmis = dmis
def run(N=100, plotIt=True):
np.random.seed(1)
mesh = Mesh.TensorMesh([N])
nk = 20
jk = np.linspace(1., 60., nk)
p = -0.25
q = 0.25
def g(k):
return (np.exp(p * jk[k] * mesh.vectorCCx) *
np.cos(np.pi * q * jk[k] * mesh.vectorCCx))
G = np.empty((nk, mesh.nC))
for i in range(nk):
G[i, :] = g(i)
mtrue = np.zeros(mesh.nC)
mtrue[mesh.vectorCCx > 0.3] = 1.
mtrue[mesh.vectorCCx > 0.45] = -0.5
mtrue[mesh.vectorCCx > 0.6] = 0
prob = Problem.LinearProblem(mesh, G=G)
survey = Survey.LinearSurvey()
survey.pair(prob)
survey.makeSyntheticData(mtrue, std=0.01)
M = prob.mesh
reg = Regularization.Tikhonov(mesh, alpha_s=1., alpha_x=1.)
dmis = DataMisfit.l2_DataMisfit(survey)
opt = Optimization.InexactGaussNewton(maxIter=60)
invProb = InvProblem.BaseInvProblem(dmis, reg, opt)
directives = [
Directives.BetaEstimate_ByEig(beta0_ratio=1e-2),
Directives.TargetMisfit()
]
inv = Inversion.BaseInversion(invProb, directiveList=directives)
m0 = np.zeros_like(survey.mtrue)
mrec = inv.run(m0)
if plotIt:
fig, axes = plt.subplots(1, 2, figsize=(12 * 1.2, 4 * 1.2))
for i in range(prob.G.shape[0]):
axes[0].plot(prob.G[i, :])
axes[0].set_title('Columns of matrix G')
axes[1].plot(M.vectorCCx, survey.mtrue, 'b-')
axes[1].plot(M.vectorCCx, mrec, 'r-')
axes[1].legend(('True Model', 'Recovered Model'))
axes[1].set_ylim([-2, 2])
return prob, survey, mesh, mrec
def setUp(self):
cs = 25.
hx = [(cs,0, -1.3),(cs,21),(cs,0, 1.3)]
hy = [(cs,0, -1.3),(cs,21),(cs,0, 1.3)]
hz = [(cs,0, -1.3),(cs,20),(cs,0, 1.3)]
mesh = Mesh.TensorMesh([hx, hy, hz],x0="CCC")
blkind0 = Utils.ModelBuilder.getIndicesSphere(np.r_[-100., -100., -200.], 75., mesh.gridCC)
blkind1 = Utils.ModelBuilder.getIndicesSphere(np.r_[100., 100., -200.], 75., mesh.gridCC)
sigma = np.ones(mesh.nC)*1e-2
airind = mesh.gridCC[:,2]>0.
sigma[airind] = 1e-8
eta = np.zeros(mesh.nC)
tau = np.ones_like(sigma)*1.
eta[blkind0] = 0.1
eta[blkind1] = 0.1
tau[blkind0] = 0.1
tau[blkind1] = 0.01
actmapeta = Maps.InjectActiveCells(mesh, ~airind, 0.)
actmaptau = Maps.InjectActiveCells(mesh, ~airind, 1.)
x = mesh.vectorCCx[(mesh.vectorCCx>-155.)&(mesh.vectorCCx<155.)]
y = mesh.vectorCCx[(mesh.vectorCCy>-155.)&(mesh.vectorCCy<155.)]
Aloc = np.r_[-200., 0., 0.]
Bloc = np.r_[200., 0., 0.]
M = Utils.ndgrid(x-25.,y, np.r_[0.])
N = Utils.ndgrid(x+25.,y, np.r_[0.])
times = np.arange(10)*1e-3 + 1e-3
rx = SIP.Rx.Dipole(M, N, times)
src = SIP.Src.Dipole([rx], Aloc, Bloc)
survey = SIP.Survey([src])
colemap = [("eta", Maps.IdentityMap(mesh)*actmapeta), ("taui", Maps.IdentityMap(mesh)*actmaptau)]
problem = SIP.Problem3D_N(mesh, sigma=sigma, mapping=colemap)
problem.Solver = Solver
problem.pair(survey)
mSynth = np.r_[eta[~airind], 1./tau[~airind]]
survey.makeSyntheticData(mSynth)
# Now set up the problem to do some minimization
dmis = DataMisfit.l2_DataMisfit(survey)
regmap = Maps.IdentityMap(nP=int(mSynth[~airind].size*2))
reg = SIP.MultiRegularization(mesh, mapping=regmap, nModels=2, indActive=~airind)
opt = Optimization.InexactGaussNewton(maxIterLS=20, maxIter=10, tolF=1e-6, tolX=1e-6, tolG=1e-6, maxIterCG=6)
invProb = InvProblem.BaseInvProblem(dmis, reg, opt, beta=1e4)
inv = Inversion.BaseInversion(invProb)
self.inv = inv
self.reg = reg
self.p = problem
self.mesh = mesh
self.m0 = mSynth
self.survey = survey
self.dmis = dmis
def test_inv(self):
reg = Regularization.Tikhonov(self.mesh)
opt = Optimization.InexactGaussNewton(maxIter=10)
invProb = InvProblem.BaseInvProblem(self.dmiscobmo, reg, opt)
directives = [
Directives.BetaEstimate_ByEig(beta0_ratio=1e-2),
]
inv = Inversion.BaseInversion(invProb, directiveList=directives)
m0 = self.model.mean() * np.ones_like(self.model)
mrec = inv.run(m0)
def setUp(self):
mesh = Mesh.TensorMesh([20, 20, 20], "CCN")
sigma = np.ones(mesh.nC) * 1. / 100.
actind = mesh.gridCC[:, 2] < -0.2
# actMap = Maps.InjectActiveCells(mesh, actind, 0.)
xyzM = Utils.ndgrid(
np.ones_like(mesh.vectorCCx[:-1]) * -0.4,
np.ones_like(mesh.vectorCCy) * -0.4, np.r_[-0.3])
xyzN = Utils.ndgrid(mesh.vectorCCx[1:], mesh.vectorCCy, np.r_[-0.3])
problem = SP.Problem_CC(mesh,
sigma=sigma,
qMap=Maps.IdentityMap(mesh),
Solver=PardisoSolver)
rx = SP.Rx.Dipole(xyzN, xyzM)
src = SP.Src.StreamingCurrents([rx],
L=np.ones(mesh.nC),
mesh=mesh,
modelType="CurrentSource")
survey = SP.Survey([src])
survey.pair(problem)
q = np.zeros(mesh.nC)
inda = Utils.closestPoints(mesh, np.r_[-0.5, 0., -0.8])
indb = Utils.closestPoints(mesh, np.r_[0.5, 0., -0.8])
q[inda] = 1.
q[indb] = -1.
mSynth = q.copy()
survey.makeSyntheticData(mSynth)
# Now set up the problem to do some minimization
dmis = DataMisfit.l2_DataMisfit(survey)
reg = Regularization.Simple(mesh)
opt = Optimization.InexactGaussNewton(maxIterLS=20,
maxIter=10,
tolF=1e-6,
tolX=1e-6,
tolG=1e-6,
maxIterCG=6)
invProb = InvProblem.BaseInvProblem(dmis, reg, opt, beta=1e-2)
inv = Inversion.BaseInversion(invProb)
self.inv = inv
self.reg = reg
self.p = problem
self.mesh = mesh
self.m0 = mSynth
self.survey = survey
self.dmis = dmis
def setUp(self):
cs = 12.5
hx = [(cs, 7, -1.3), (cs, 61), (cs, 7, 1.3)]
hy = [(cs, 7, -1.3), (cs, 20)]
mesh = Mesh.TensorMesh([hx, hy], x0="CN")
# x = np.linspace(-200, 200., 20)
x = np.linspace(-200, 200., 2)
M = Utils.ndgrid(x - 12.5, np.r_[0.])
N = Utils.ndgrid(x + 12.5, np.r_[0.])
A0loc = np.r_[-150, 0.]
A1loc = np.r_[-130, 0.]
B0loc = np.r_[-130, 0.]
B1loc = np.r_[-110, 0.]
rx = DC.Rx.Dipole_ky(M, N)
src0 = DC.Src.Dipole([rx], A0loc, B0loc)
src1 = DC.Src.Dipole([rx], A1loc, B1loc)
survey = IP.Survey([src0, src1])
sigma = np.ones(mesh.nC) * 1.
problem = IP.Problem2D_CC(mesh,
sigma=sigma,
etaMap=Maps.IdentityMap(mesh),
verbose=False)
problem.pair(survey)
mSynth = np.ones(mesh.nC) * 0.1
survey.makeSyntheticData(mSynth)
# Now set up the problem to do some minimization
dmis = DataMisfit.l2_DataMisfit(survey)
reg = Regularization.Tikhonov(mesh)
opt = Optimization.InexactGaussNewton(maxIterLS=20,
maxIter=10,
tolF=1e-6,
tolX=1e-6,
tolG=1e-6,
maxIterCG=6)
invProb = InvProblem.BaseInvProblem(dmis, reg, opt, beta=1e4)
inv = Inversion.BaseInversion(invProb)
self.inv = inv
self.reg = reg
self.p = problem
self.mesh = mesh
self.m0 = mSynth
self.survey = survey
self.dmis = dmis
def test_inv_mref_setting(self):
reg1 = Regularization.Tikhonov(self.mesh)
reg2 = Regularization.Tikhonov(self.mesh)
reg = reg1 + reg2
opt = Optimization.InexactGaussNewton(maxIter=10)
invProb = InvProblem.BaseInvProblem(self.dmiscobmo, reg, opt)
directives = [
Directives.BetaEstimate_ByEig(beta0_ratio=1e-2),
]
inv = Inversion.BaseInversion(invProb, directiveList=directives)
m0 = self.model.mean() * np.ones_like(self.model)
mrec = inv.run(m0)
self.assertTrue(np.all(reg1.mref == m0))
self.assertTrue(np.all(reg2.mref == m0))
def setUp(self):
aSpacing = 2.5
nElecs = 10
surveySize = nElecs * aSpacing - aSpacing
cs = surveySize / nElecs / 4
mesh = Mesh.TensorMesh(
[
[(cs, 10, -1.3), (cs, surveySize / cs), (cs, 10, 1.3)],
[(cs, 3, -1.3), (cs, 3, 1.3)],
# [(cs, 5, -1.3), (cs, 10)]
],
'CN')
srcList = DC.Utils.WennerSrcList(nElecs, aSpacing, in2D=True)
survey = DC.Survey(srcList)
problem = DC.Problem3D_N(mesh,
rhoMap=Maps.IdentityMap(mesh),
storeJ=True)
problem.pair(survey)
mSynth = np.ones(mesh.nC)
survey.makeSyntheticData(mSynth)
# Now set up the problem to do some minimization
dmis = DataMisfit.l2_DataMisfit(survey)
reg = Regularization.Tikhonov(mesh)
opt = Optimization.InexactGaussNewton(maxIterLS=20,
maxIter=10,
tolF=1e-6,
tolX=1e-6,
tolG=1e-6,
maxIterCG=6)
invProb = InvProblem.BaseInvProblem(dmis, reg, opt, beta=1e4)
inv = Inversion.BaseInversion(invProb)
self.inv = inv
self.reg = reg
self.p = problem
self.mesh = mesh
self.m0 = mSynth
self.survey = survey
self.dmis = dmis
def setUp(self):
cs = 12.5
hx = [(cs, 7, -1.3), (cs, 61), (cs, 7, 1.3)]
hy = [(cs, 7, -1.3), (cs, 20)]
mesh = Mesh.TensorMesh([hx, hy], x0="CN")
x = np.linspace(-135, 250., 20)
M = Utils.ndgrid(x - 12.5, np.r_[0.])
N = Utils.ndgrid(x + 12.5, np.r_[0.])
A0loc = np.r_[-150, 0.]
A1loc = np.r_[-130, 0.]
rxloc = [np.c_[M, np.zeros(20)], np.c_[N, np.zeros(20)]]
rx = DC.Rx.Dipole_ky(M, N)
src0 = DC.Src.Pole([rx], A0loc)
src1 = DC.Src.Pole([rx], A1loc)
survey = DC.Survey_ky([src0, src1])
problem = DC.Problem2D_N(mesh,
mapping=[('rho', Maps.IdentityMap(mesh))])
problem.pair(survey)
mSynth = np.ones(mesh.nC) * 1.
survey.makeSyntheticData(mSynth)
# Now set up the problem to do some minimization
dmis = DataMisfit.l2_DataMisfit(survey)
reg = Regularization.Tikhonov(mesh)
opt = Optimization.InexactGaussNewton(maxIterLS=20,
maxIter=10,
tolF=1e-6,
tolX=1e-6,
tolG=1e-6,
maxIterCG=6)
invProb = InvProblem.BaseInvProblem(dmis, reg, opt, beta=1e0)
inv = Inversion.BaseInversion(invProb)
self.inv = inv
self.reg = reg
self.p = problem
self.mesh = mesh
self.m0 = mSynth
self.survey = survey
self.dmis = dmis
def solve(self):
# initial values/model
m0 = numpy.median(-4) * numpy.ones(self.mapping.nP)
# Data Misfit
dataMisfit = DataMisfit.l2_DataMisfit(self.survey)
# Regularization
regT = Regularization.Simple(self.mesh, indActive=self.activeCellIndices, alpha_s=1e-6, alpha_x=1., alpha_y=1., alpha_z=1.)
# Optimization Scheme
opt = Optimization.InexactGaussNewton(maxIter=10)
# Form the problem
opt.remember('xc')
invProb = InvProblem.BaseInvProblem(dataMisfit, regT, opt)
# Directives for Inversions
beta = Directives.BetaEstimate_ByEig(beta0_ratio=0.5e+1)
Target = Directives.TargetMisfit()
betaSched = Directives.BetaSchedule(coolingFactor=5., coolingRate=2)
inversion = Inversion.BaseInversion(invProb, directiveList=[beta, Target, betaSched])
# Run Inversion
self.invModelOnActiveCells = inversion.run(m0)
self.invModelOnAllCells = self.givenModelCond * numpy.ones_like(self.givenModelCond)
self.invModelOnAllCells[self.activeCellIndices] = self.invModelOnActiveCells
self.invModelOnCoreCells = self.invModelOnAllCells[self.coreMeshCellIndices]
pass
def MagneticsDiffSecondaryInv(mesh, model, data, **kwargs):
"""
Inversion module for MagneticsDiffSecondary
"""
from SimPEG import Optimization, Regularization, Parameters, ObjFunction, Inversion
prob = Simulation3DDifferential(mesh, survey=data, mu=model)
miter = kwargs.get("maxIter", 10)
# Create an optimization program
opt = Optimization.InexactGaussNewton(maxIter=miter)
opt.bfgsH0 = Solver(sp.identity(model.nP), flag="D")
# Create a regularization program
reg = Regularization.Tikhonov(model)
# Create an objective function
beta = Parameters.BetaSchedule(beta0=1e0)
obj = ObjFunction.BaseObjFunction(prob, reg, beta=beta)
# Create an inversion object
inv = Inversion.BaseInversion(obj, opt)
return inv, reg
def setUp(self):
time = np.logspace(-3, 0, 21)
n_loc = 5
wires = Maps.Wires(('eta', n_loc), ('tau', n_loc), ('c', n_loc))
taumap = Maps.ExpMap(nP=n_loc) * wires.tau
etamap = Maps.ExpMap(nP=n_loc) * wires.eta
cmap = Maps.ExpMap(nP=n_loc) * wires.c
survey = SEMultiSurvey(time=time, locs=np.zeros((n_loc, 3)), n_pulse=0)
mesh = Mesh.TensorMesh([np.ones(int(n_loc * 3))])
prob = SEMultiInvProblem(mesh, etaMap=etamap, tauMap=taumap, cMap=cmap)
prob.pair(survey)
eta0, tau0, c0 = 0.1, 10., 0.5
m0 = np.log(np.r_[eta0 * np.ones(n_loc), tau0 * np.ones(n_loc),
c0 * np.ones(n_loc)])
survey.makeSyntheticData(m0)
# Now set up the problem to do some minimization
dmis = DataMisfit.l2_DataMisfit(survey)
reg = regularization.Tikhonov(mesh)
opt = Optimization.InexactGaussNewton(maxIterLS=20,
maxIter=10,
tolF=1e-6,
tolX=1e-6,
tolG=1e-6,
maxIterCG=6)
invProb = InvProblem.BaseInvProblem(dmis, reg, opt, beta=0.)
inv = Inversion.BaseInversion(invProb)
self.inv = inv
self.reg = reg
self.p = prob
self.survey = survey
self.m0 = m0
self.dmis = dmis
self.mesh = mesh
def run(plotIt=True, saveFig=False, cleanup=True):
"""
Run 1D inversions for a single sounding of the RESOLVE and SkyTEM
bookpurnong data
:param bool plotIt: show the plots?
:param bool saveFig: save the figure
:param bool cleanup: remove the downloaded results
"""
downloads, directory = download_and_unzip_data()
resolve = h5py.File(
os.path.sep.join([directory, "booky_resolve.hdf5"]),
"r"
)
skytem = h5py.File(
os.path.sep.join([directory, "booky_skytem.hdf5"]),
"r"
)
river_path = resolve["river_path"].value
# Choose a sounding location to invert
xloc, yloc = 462100.0, 6196500.0
rxind_skytem = np.argmin(
abs(skytem["xy"][:, 0]-xloc)+abs(skytem["xy"][:, 1]-yloc)
)
rxind_resolve = np.argmin(
abs(resolve["xy"][:, 0]-xloc)+abs(resolve["xy"][:, 1]-yloc)
)
# Plot both resolve and skytem data on 2D plane
fig = plt.figure(figsize=(13, 6))
title = ["RESOLVE In-phase 400 Hz", "SkyTEM High moment 156 $\mu$s"]
ax1 = plt.subplot(121)
ax2 = plt.subplot(122)
axs = [ax1, ax2]
out_re = Utils.plot2Ddata(
resolve["xy"], resolve["data"][:, 0], ncontour=100,
contourOpts={"cmap": "viridis"}, ax=ax1
)
vmin, vmax = out_re[0].get_clim()
cb_re = plt.colorbar(
out_re[0], ticks=np.linspace(vmin, vmax, 3), ax=ax1,
fraction=0.046, pad=0.04
)
temp_skytem = skytem["data"][:, 5].copy()
temp_skytem[skytem["data"][:, 5] > 7e-10] = 7e-10
out_sky = Utils.plot2Ddata(
skytem["xy"][:, :2], temp_skytem, ncontour=100,
contourOpts={"cmap": "viridis", "vmax": 7e-10}, ax=ax2
)
vmin, vmax = out_sky[0].get_clim()
cb_sky = plt.colorbar(
out_sky[0], ticks=np.linspace(vmin, vmax*0.99, 3), ax=ax2,
format="%.1e", fraction=0.046, pad=0.04
)
cb_re.set_label("Bz (ppm)")
cb_sky.set_label("dB$_z$ / dt (V/A-m$^4$)")
for i, ax in enumerate(axs):
xticks = [460000, 463000]
yticks = [6195000, 6198000, 6201000]
ax.set_xticks(xticks)
ax.set_yticks(yticks)
ax.plot(xloc, yloc, 'wo')
ax.plot(river_path[:, 0], river_path[:, 1], 'k', lw=0.5)
ax.set_aspect("equal")
if i == 1:
ax.plot(
skytem["xy"][:, 0], skytem["xy"][:, 1], 'k.',
alpha=0.02, ms=1
)
ax.set_yticklabels([str(" ") for f in yticks])
else:
ax.plot(
resolve["xy"][:, 0], resolve["xy"][:, 1], 'k.', alpha=0.02,
ms=1
)
ax.set_yticklabels([str(f) for f in yticks])
ax.set_ylabel("Northing (m)")
ax.set_xlabel("Easting (m)")
ax.set_title(title[i])
ax.axis('equal')
# plt.tight_layout()
if saveFig is True:
fig.savefig("resolve_skytem_data.png", dpi=600)
# ------------------ Mesh ------------------ #
# Step1: Set 2D cylindrical mesh
cs, ncx, ncz, npad = 1., 10., 10., 20
hx = [(cs, ncx), (cs, npad, 1.3)]
npad = 12
temp = np.logspace(np.log10(1.), np.log10(12.), 19)
temp_pad = temp[-1] * 1.3 ** np.arange(npad)
hz = np.r_[temp_pad[::-1], temp[::-1], temp, temp_pad]
mesh = Mesh.CylMesh([hx, 1, hz], '00C')
active = mesh.vectorCCz < 0.
# Step2: Set a SurjectVertical1D mapping
# Note: this sets our inversion model as 1D log conductivity
# below subsurface
active = mesh.vectorCCz < 0.
actMap = Maps.InjectActiveCells(mesh, active, np.log(1e-8), nC=mesh.nCz)
mapping = Maps.ExpMap(mesh) * Maps.SurjectVertical1D(mesh) * actMap
sig_half = 1e-1
sig_air = 1e-8
sigma = np.ones(mesh.nCz)*sig_air
sigma[active] = sig_half
# Initial and reference model
m0 = np.log(sigma[active])
# ------------------ RESOLVE Forward Simulation ------------------ #
# Step3: Invert Resolve data
# Bird height from the surface
b_height_resolve = resolve["src_elevation"].value
src_height_resolve = b_height_resolve[rxind_resolve]
# Set Rx (In-phase and Quadrature)
rxOffset = 7.86
bzr = EM.FDEM.Rx.Point_bSecondary(
np.array([[rxOffset, 0., src_height_resolve]]),
orientation='z',
component='real'
)
bzi = EM.FDEM.Rx.Point_b(
np.array([[rxOffset, 0., src_height_resolve]]),
orientation='z',
component='imag'
)
# Set Source (In-phase and Quadrature)
frequency_cp = resolve["frequency_cp"].value
freqs = frequency_cp.copy()
srcLoc = np.array([0., 0., src_height_resolve])
srcList = [EM.FDEM.Src.MagDipole([bzr, bzi], freq, srcLoc, orientation='Z')
for freq in freqs]
# Set FDEM survey (In-phase and Quadrature)
survey = EM.FDEM.Survey(srcList)
prb = EM.FDEM.Problem3D_b(mesh, sigmaMap=mapping, Solver=Solver)
prb.pair(survey)
# ------------------ RESOLVE Inversion ------------------ #
# Primary field
bp = - mu_0/(4*np.pi*rxOffset**3)
# Observed data
cpi_inds = [0, 2, 6, 8, 10]
cpq_inds = [1, 3, 7, 9, 11]
dobs_re = np.c_[
resolve["data"][rxind_resolve, :][cpi_inds],
resolve["data"][rxind_resolve, :][cpq_inds]
].flatten() * bp * 1e-6
# Uncertainty
std = np.repeat(np.r_[np.ones(3)*0.1, np.ones(2)*0.15], 2)
floor = 20 * abs(bp) * 1e-6
uncert = abs(dobs_re) * std + floor
# Data Misfit
survey.dobs = dobs_re
dmisfit = DataMisfit.l2_DataMisfit(survey)
dmisfit.W = 1./uncert
# Regularization
regMesh = Mesh.TensorMesh([mesh.hz[mapping.maps[-1].indActive]])
reg = Regularization.Simple(regMesh)
# Optimization
opt = Optimization.InexactGaussNewton(maxIter=5)
# statement of the inverse problem
invProb = InvProblem.BaseInvProblem(dmisfit, reg, opt)
# Inversion directives and parameters
target = Directives.TargetMisfit() # stop when we hit target misfit
invProb.beta = 2.
# betaest = Directives.BetaEstimate_ByEig(beta0_ratio=1e0)
inv = Inversion.BaseInversion(invProb, directiveList=[target])
reg.alpha_s = 1e-3
reg.alpha_x = 1.
reg.mref = m0.copy()
opt.LSshorten = 0.5
opt.remember('xc')
# run the inversion
mopt_re = inv.run(m0)
dpred_re = invProb.dpred
# ------------------ SkyTEM Forward Simulation ------------------ #
# Step4: Invert SkyTEM data
# Bird height from the surface
b_height_skytem = skytem["src_elevation"].value
src_height = b_height_skytem[rxind_skytem]
srcLoc = np.array([[0., 0., src_height]])
# Radius of the source loop
area = skytem["area"].value
radius = np.sqrt(area/np.pi)
rxLoc = np.array([[radius, 0., src_height]])
# Parameters for current waveform
t0 = skytem["t0"].value
times = skytem["times"].value
waveform_skytem = skytem["waveform"].value
offTime = t0
times_off = times - t0
# Note: we are Using theoretical VTEM waveform,
# but effectively fits SkyTEM waveform
peakTime = 1.0000000e-02
a = 3.
dbdt_z = EM.TDEM.Rx.Point_dbdt(
locs=rxLoc, times=times_off[:-3]+offTime, orientation='z'
) # vertical db_dt
rxList = [dbdt_z] # list of receivers
srcList = [
EM.TDEM.Src.CircularLoop(
rxList, loc=srcLoc, radius=radius,
orientation='z',
waveform=EM.TDEM.Src.VTEMWaveform(
offTime=offTime, peakTime=peakTime, a=3.
)
)
]
# solve the problem at these times
timeSteps = [
(peakTime/5, 5), ((offTime-peakTime)/5, 5),
(1e-5, 5), (5e-5, 5), (1e-4, 10), (5e-4, 15)
]
prob = EM.TDEM.Problem3D_e(
mesh, timeSteps=timeSteps, sigmaMap=mapping, Solver=Solver
)
survey = EM.TDEM.Survey(srcList)
prob.pair(survey)
src = srcList[0]
rx = src.rxList[0]
wave = []
for time in prob.times:
wave.append(src.waveform.eval(time))
wave = np.hstack(wave)
out = survey.dpred(m0)
# plot the waveform
fig = plt.figure(figsize=(5, 3))
times_off = times-t0
plt.plot(waveform_skytem[:, 0], waveform_skytem[:, 1], 'k.')
plt.plot(prob.times, wave, 'k-', lw=2)
plt.legend(("SkyTEM waveform", "Waveform (fit)"), fontsize=10)
for t in rx.times:
plt.plot(np.ones(2)*t, np.r_[-0.03, 0.03], 'k-')
plt.ylim(-0.1, 1.1)
plt.grid(True)
plt.xlabel("Time (s)")
plt.ylabel("Normalized current")
if saveFig:
fig.savefig("skytem_waveform", dpi=200)
# Observed data
dobs_sky = skytem["data"][rxind_skytem, :-3] * area
# ------------------ SkyTEM Inversion ------------------ #
# Uncertainty
std = 0.12
floor = 7.5e-12
uncert = abs(dobs_sky) * std + floor
# Data Misfit
survey.dobs = -dobs_sky
dmisfit = DataMisfit.l2_DataMisfit(survey)
uncert = 0.12*abs(dobs_sky) + 7.5e-12
dmisfit.W = Utils.sdiag(1./uncert)
# Regularization
regMesh = Mesh.TensorMesh([mesh.hz[mapping.maps[-1].indActive]])
reg = Regularization.Simple(regMesh)
# Optimization
opt = Optimization.InexactGaussNewton(maxIter=5)
# statement of the inverse problem
invProb = InvProblem.BaseInvProblem(dmisfit, reg, opt)
# Directives and Inversion Parameters
target = Directives.TargetMisfit()
# betaest = Directives.BetaEstimate_ByEig(beta0_ratio=1e0)
invProb.beta = 20.
inv = Inversion.BaseInversion(invProb, directiveList=[target])
reg.alpha_s = 1e-1
reg.alpha_x = 1.
opt.LSshorten = 0.5
opt.remember('xc')
reg.mref = mopt_re # Use RESOLVE model as a reference model
# run the inversion
mopt_sky = inv.run(m0)
dpred_sky = invProb.dpred
# Plot the figure from the paper
plt.figure(figsize=(12, 8))
fs = 13 # fontsize
matplotlib.rcParams['font.size'] = fs
ax0 = plt.subplot2grid((2, 2), (0, 0), rowspan=2)
ax1 = plt.subplot2grid((2, 2), (0, 1))
ax2 = plt.subplot2grid((2, 2), (1, 1))
# Recovered Models
sigma_re = np.repeat(np.exp(mopt_re), 2, axis=0)
sigma_sky = np.repeat(np.exp(mopt_sky), 2, axis=0)
z = np.repeat(mesh.vectorCCz[active][1:], 2, axis=0)
z = np.r_[mesh.vectorCCz[active][0], z, mesh.vectorCCz[active][-1]]
ax0.semilogx(sigma_re, z, 'k', lw=2, label="RESOLVE")
ax0.semilogx(sigma_sky, z, 'b', lw=2, label="SkyTEM")
ax0.set_ylim(-50, 0)
# ax0.set_xlim(5e-4, 1e2)
ax0.grid(True)
ax0.set_ylabel("Depth (m)")
ax0.set_xlabel("Conducivity (S/m)")
ax0.legend(loc=3)
ax0.set_title("(a) Recovered Models")
# RESOLVE Data
ax1.loglog(
frequency_cp, dobs_re.reshape((5, 2))[:, 0]/bp*1e6, 'k-',
label="Obs (real)"
)
ax1.loglog(
frequency_cp, dobs_re.reshape((5, 2))[:, 1]/bp*1e6, 'k--',
label="Obs (imag)"
)
ax1.loglog(
frequency_cp, dpred_re.reshape((5, 2))[:, 0]/bp*1e6, 'k+', ms=10,
markeredgewidth=2., label="Pred (real)"
)
ax1.loglog(
frequency_cp, dpred_re.reshape((5, 2))[:, 1]/bp*1e6, 'ko', ms=6,
markeredgecolor='k', markeredgewidth=0.5, label="Pred (imag)"
)
ax1.set_title("(b) RESOLVE")
ax1.set_xlabel("Frequency (Hz)")
ax1.set_ylabel("Bz (ppm)")
ax1.grid(True)
ax1.legend(loc=3, fontsize=11)
# SkyTEM data
ax2.loglog(times_off[3:]*1e6, dobs_sky/area, 'b-', label="Obs")
ax2.loglog(
times_off[3:]*1e6, -dpred_sky/area, 'bo', ms=4,
markeredgecolor='k', markeredgewidth=0.5, label="Pred"
)
ax2.set_xlim(times_off.min()*1e6*1.2, times_off.max()*1e6*1.1)
ax2.set_xlabel("Time ($\mu s$)")
ax2.set_ylabel("dBz / dt (V/A-m$^4$)")
ax2.set_title("(c) SkyTEM High-moment")
ax2.grid(True)
ax2.legend(loc=3)
a3 = plt.axes([0.86, .33, .1, .09], facecolor=[0.8, 0.8, 0.8, 0.6])
a3.plot(prob.times*1e6, wave, 'k-')
a3.plot(
rx.times*1e6, np.zeros_like(rx.times), 'k|', markeredgewidth=1,
markersize=12
)
a3.set_xlim([prob.times.min()*1e6*0.75, prob.times.max()*1e6*1.1])
a3.set_title('(d) Waveform', fontsize=11)
a3.set_xticks([prob.times.min()*1e6, t0*1e6, prob.times.max()*1e6])
a3.set_yticks([])
# a3.set_xticklabels(['0', '2e4'])
a3.set_xticklabels(['-1e4', '0', '1e4'])
plt.tight_layout()
if saveFig:
plt.savefig("booky1D_time_freq.png", dpi=600)
if plotIt:
plt.show()
if cleanup:
print( os.path.split(directory)[:-1])
os.remove(
os.path.sep.join(
directory.split()[:-1] + ["._bookpurnong_inversion"]
)
)
os.remove(downloads)
shutil.rmtree(directory)
def run(plotIt=True):
"""
1D FDEM Mu Inversion
====================
1D inversion of Magnetic Susceptibility from FDEM data assuming a fixed
electrical conductivity
"""
# Set up cylindrically symmeric mesh
cs, ncx, ncz, npad = 10., 15, 25, 13 # padded cyl mesh
hx = [(cs, ncx), (cs, npad, 1.3)]
hz = [(cs, npad, -1.3), (cs, ncz), (cs, npad, 1.3)]
mesh = Mesh.CylMesh([hx, 1, hz], '00C')
# Geologic Parameters model
layerz = np.r_[-100., -50.]
layer = (mesh.vectorCCz >= layerz[0]) & (mesh.vectorCCz <= layerz[1])
active = mesh.vectorCCz < 0.
# Electrical Conductivity
sig_half = 1e-2 # Half-space conductivity
sig_air = 1e-8 # Air conductivity
sig_layer = 1e-2 # Layer conductivity
sigma = np.ones(mesh.nCz) * sig_air
sigma[active] = sig_half
sigma[layer] = sig_layer
# mur - relative magnetic permeability
mur_half = 1.
mur_air = 1.
mur_layer = 2.
mur = np.ones(mesh.nCz) * mur_air
mur[active] = mur_half
mur[layer] = mur_layer
mtrue = mur[active]
# Maps
actMap = Maps.InjectActiveCells(mesh, active, mur_air, nC=mesh.nCz)
surj1Dmap = Maps.SurjectVertical1D(mesh)
murMap = Maps.MuRelative(mesh)
# Mapping
muMap = murMap * surj1Dmap * actMap
# ----- FDEM problem & survey -----
rxlocs = Utils.ndgrid([np.r_[10.], np.r_[0], np.r_[30.]])
bzr = FDEM.Rx.Point_bSecondary(rxlocs, 'z', 'real')
# bzi = FDEM.Rx.Point_bSecondary(rxlocs, 'z', 'imag')
freqs = np.linspace(2000, 10000, 10) #np.logspace(3, 4, 10)
srcLoc = np.array([0., 0., 30.])
print('min skin depth = ', 500. / np.sqrt(freqs.max() * sig_half),
'max skin depth = ', 500. / np.sqrt(freqs.min() * sig_half))
print('max x ', mesh.vectorCCx.max(), 'min z ', mesh.vectorCCz.min(),
'max z ', mesh.vectorCCz.max())
srcList = [
FDEM.Src.MagDipole([bzr], freq, srcLoc, orientation='Z')
for freq in freqs
]
surveyFD = FDEM.Survey(srcList)
prbFD = FDEM.Problem3D_b(mesh,
sigma=surj1Dmap * sigma,
muMap=muMap,
Solver=Solver)
prbFD.pair(surveyFD)
std = 0.03
surveyFD.makeSyntheticData(mtrue, std)
surveyFD.eps = np.linalg.norm(surveyFD.dtrue) * 1e-6
# FDEM inversion
np.random.seed(13472)
dmisfit = DataMisfit.l2_DataMisfit(surveyFD)
regMesh = Mesh.TensorMesh([mesh.hz[muMap.maps[-1].indActive]])
reg = Regularization.Simple(regMesh)
opt = Optimization.InexactGaussNewton(maxIterCG=10)
invProb = InvProblem.BaseInvProblem(dmisfit, reg, opt)
# Inversion Directives betaest = Directives.BetaEstimate_ByEig(beta0_ratio=2.)
beta = Directives.BetaSchedule(coolingFactor=4, coolingRate=3)
betaest = Directives.BetaEstimate_ByEig(beta0_ratio=2.)
target = Directives.TargetMisfit()
directiveList = [beta, betaest, target]
inv = Inversion.BaseInversion(invProb, directiveList=directiveList)
m0 = mur_half * np.ones(mtrue.size)
reg.alpha_s = 2e-2
reg.alpha_x = 1.
prbFD.counter = opt.counter = Utils.Counter()
opt.remember('xc')
moptFD = inv.run(m0)
dpredFD = surveyFD.dpred(moptFD)
if plotIt:
fig, ax = plt.subplots(1, 3, figsize=(10, 6))
fs = 13 # fontsize
matplotlib.rcParams['font.size'] = fs
# Plot the conductivity model
ax[0].semilogx(sigma[active], mesh.vectorCCz[active], 'k-', lw=2)
ax[0].set_ylim(-500, 0)
ax[0].set_xlim(5e-3, 1e-1)
ax[0].set_xlabel('Conductivity (S/m)', fontsize=fs)
ax[0].set_ylabel('Depth (m)', fontsize=fs)
ax[0].grid(which='both',
color='k',
alpha=0.5,
linestyle='-',
linewidth=0.2)
ax[0].legend(['Conductivity Model'], fontsize=fs, loc=4)
# Plot the permeability model
ax[1].plot(mur[active], mesh.vectorCCz[active], 'k-', lw=2)
ax[1].plot(moptFD, mesh.vectorCCz[active], 'b-', lw=2)
ax[1].set_ylim(-500, 0)
ax[1].set_xlim(0.5, 2.1)
ax[1].set_xlabel('Relative Permeability', fontsize=fs)
ax[1].set_ylabel('Depth (m)', fontsize=fs)
ax[1].grid(which='both',
color='k',
alpha=0.5,
linestyle='-',
linewidth=0.2)
ax[1].legend(['True', 'Predicted'], fontsize=fs, loc=4)
# plot the data misfits - negative b/c we choose positive to be in the
# direction of primary
ax[2].plot(freqs, -surveyFD.dobs, 'k-', lw=2)
# ax[2].plot(freqs, -surveyFD.dobs[1::2], 'k--', lw=2)
ax[2].loglog(freqs, -dpredFD, 'bo', ms=6)
# ax[2].loglog(freqs, -dpredFD[1::2], 'b+', markeredgewidth=2., ms=10)
# Labels, gridlines, etc
ax[2].grid(which='both', alpha=0.5, linestyle='-', linewidth=0.2)
ax[2].grid(which='both', alpha=0.5, linestyle='-', linewidth=0.2)
ax[2].set_xlabel('Frequency (Hz)', fontsize=fs)
ax[2].set_ylabel('Vertical magnetic field (-T)', fontsize=fs)
# ax[2].legend(("Obs", "Pred"), fontsize=fs)
ax[2].legend(("z-Obs (real)", "z-Pred (real)"), fontsize=fs)
ax[2].set_xlim(freqs.max(), freqs.min())
ax[0].set_title("(a) Conductivity Model", fontsize=fs)
ax[1].set_title("(b) $\mu_r$ Model", fontsize=fs)
ax[2].set_title("(c) FDEM observed vs. predicted", fontsize=fs)
# ax[2].set_title("(c) TDEM observed vs. predicted", fontsize=fs)
plt.tight_layout(pad=1.5)
def run(plotIt=True):
cs, ncx, ncz, npad = 5., 25, 15, 15
hx = [(cs, ncx), (cs, npad, 1.3)]
hz = [(cs, npad, -1.3), (cs, ncz), (cs, npad, 1.3)]
mesh = Mesh.CylMesh([hx, 1, hz], '00C')
layerz = -100.
active = mesh.vectorCCz < 0.
layer = (mesh.vectorCCz < 0.) & (mesh.vectorCCz >= layerz)
actMap = Maps.InjectActiveCells(mesh, active, np.log(1e-8), nC=mesh.nCz)
mapping = Maps.ExpMap(mesh) * Maps.SurjectVertical1D(mesh) * actMap
sig_half = 2e-2
sig_air = 1e-8
sig_layer = 1e-2
sigma = np.ones(mesh.nCz) * sig_air
sigma[active] = sig_half
sigma[layer] = sig_layer
mtrue = np.log(sigma[active])
if plotIt:
fig, ax = plt.subplots(1, 1, figsize=(3, 6))
plt.semilogx(sigma[active], mesh.vectorCCz[active])
ax.set_ylim(-500, 0)
ax.set_xlim(1e-3, 1e-1)
ax.set_xlabel('Conductivity (S/m)', fontsize=14)
ax.set_ylabel('Depth (m)', fontsize=14)
ax.grid(color='k', alpha=0.5, linestyle='dashed', linewidth=0.5)
rxOffset = 10.
bzi = EM.FDEM.Rx.Point_b(np.array([[rxOffset, 0., 1e-3]]),
orientation='z',
component='imag')
freqs = np.logspace(1, 3, 10)
srcLoc = np.array([0., 0., 10.])
srcList = [
EM.FDEM.Src.MagDipole([bzi], freq, srcLoc, orientation='Z')
for freq in freqs
]
survey = EM.FDEM.Survey(srcList)
prb = EM.FDEM.Problem3D_b(mesh, sigmaMap=mapping, Solver=Solver)
prb.pair(survey)
std = 0.05
survey.makeSyntheticData(mtrue, std)
survey.std = std
survey.eps = np.linalg.norm(survey.dtrue) * 1e-5
if plotIt:
fig, ax = plt.subplots(1, 1, figsize=(6, 6))
ax.semilogx(freqs, survey.dtrue[:freqs.size], 'b.-')
ax.semilogx(freqs, survey.dobs[:freqs.size], 'r.-')
ax.legend(('Noisefree', '$d^{obs}$'), fontsize=16)
ax.set_xlabel('Time (s)', fontsize=14)
ax.set_ylabel('$B_z$ (T)', fontsize=16)
ax.set_xlabel('Time (s)', fontsize=14)
ax.grid(color='k', alpha=0.5, linestyle='dashed', linewidth=0.5)
dmisfit = DataMisfit.l2_DataMisfit(survey)
regMesh = Mesh.TensorMesh([mesh.hz[mapping.maps[-1].indActive]])
reg = Regularization.Tikhonov(regMesh)
opt = Optimization.InexactGaussNewton(maxIter=6)
invProb = InvProblem.BaseInvProblem(dmisfit, reg, opt)
# Create an inversion object
beta = Directives.BetaSchedule(coolingFactor=5, coolingRate=2)
betaest = Directives.BetaEstimate_ByEig(beta0_ratio=1e0)
inv = Inversion.BaseInversion(invProb, directiveList=[beta, betaest])
m0 = np.log(np.ones(mtrue.size) * sig_half)
reg.alpha_s = 1e-3
reg.alpha_x = 1.
prb.counter = opt.counter = Utils.Counter()
opt.LSshorten = 0.5
opt.remember('xc')
mopt = inv.run(m0)
if plotIt:
fig, ax = plt.subplots(1, 1, figsize=(3, 6))
plt.semilogx(sigma[active], mesh.vectorCCz[active])
plt.semilogx(np.exp(mopt), mesh.vectorCCz[active])
ax.set_ylim(-500, 0)
ax.set_xlim(1e-3, 1e-1)
ax.set_xlabel('Conductivity (S/m)', fontsize=14)
ax.set_ylabel('Depth (m)', fontsize=14)
ax.grid(color='k', alpha=0.5, linestyle='dashed', linewidth=0.5)
plt.legend(['$\sigma_{true}$', '$\sigma_{pred}$'], loc='best')
def setUp(self):
cs = 25.
hx = [(cs, 0, -1.3), (cs, 21), (cs, 0, 1.3)]
hy = [(cs, 0, -1.3), (cs, 21), (cs, 0, 1.3)]
hz = [(cs, 0, -1.3), (cs, 20), (cs, 0, 1.3)]
mesh = Mesh.TensorMesh([hx, hy, hz], x0="CCC")
blkind0 = Utils.ModelBuilder.getIndicesSphere(
np.r_[-100., -100., -200.], 75., mesh.gridCC
)
blkind1 = Utils.ModelBuilder.getIndicesSphere(
np.r_[100., 100., -200.], 75., mesh.gridCC
)
sigma = np.ones(mesh.nC)*1e-2
airind = mesh.gridCC[:, 2] > 0.
sigma[airind] = 1e-8
eta = np.zeros(mesh.nC)
tau = np.ones_like(sigma) * 1.
c = np.ones_like(sigma) * 0.5
eta[blkind0] = 0.1
eta[blkind1] = 0.1
tau[blkind0] = 0.1
tau[blkind1] = 0.01
actmapeta = Maps.InjectActiveCells(mesh, ~airind, 0.)
actmaptau = Maps.InjectActiveCells(mesh, ~airind, 1.)
actmapc = Maps.InjectActiveCells(mesh, ~airind, 1.)
x = mesh.vectorCCx[(mesh.vectorCCx > -155.) & (mesh.vectorCCx < 155.)]
y = mesh.vectorCCy[(mesh.vectorCCy > -155.) & (mesh.vectorCCy < 155.)]
Aloc = np.r_[-200., 0., 0.]
Bloc = np.r_[200., 0., 0.]
M = Utils.ndgrid(x-25., y, np.r_[0.])
N = Utils.ndgrid(x+25., y, np.r_[0.])
times = np.arange(10)*1e-3 + 1e-3
rx = SIP.Rx.Dipole(M, N, times)
src = SIP.Src.Dipole([rx], Aloc, Bloc)
survey = SIP.Survey([src])
wires = Maps.Wires(('eta', actmapeta.nP), ('taui', actmaptau.nP), ('c', actmapc.nP))
problem = SIP.Problem3D_N(
mesh,
sigma=sigma,
etaMap=actmapeta*wires.eta,
tauiMap=actmaptau*wires.taui,
cMap=actmapc*wires.c,
actinds=~airind,
storeJ = True,
verbose=False
)
problem.Solver = Solver
problem.pair(survey)
mSynth = np.r_[eta[~airind], 1./tau[~airind], c[~airind]]
survey.makeSyntheticData(mSynth)
# Now set up the problem to do some minimization
dmis = DataMisfit.l2_DataMisfit(survey)
dmis = DataMisfit.l2_DataMisfit(survey)
reg_eta = Regularization.Simple(mesh, mapping=wires.eta, indActive=~airind)
reg_taui = Regularization.Simple(mesh, mapping=wires.taui, indActive=~airind)
reg_c = Regularization.Simple(mesh, mapping=wires.c, indActive=~airind)
reg = reg_eta + reg_taui + reg_c
opt = Optimization.InexactGaussNewton(
maxIterLS=20, maxIter=10, tolF=1e-6,
tolX=1e-6, tolG=1e-6, maxIterCG=6
)
invProb = InvProblem.BaseInvProblem(dmis, reg, opt, beta=1e4)
inv = Inversion.BaseInversion(invProb)
self.inv = inv
self.reg = reg
self.p = problem
self.mesh = mesh
self.m0 = mSynth
self.survey = survey
self.dmis = dmis
def run(plotIt=True,
survey_type="dipole-dipole",
rho_background=1e3,
rho_block=1e2,
block_x0=100,
block_dx=10,
block_y0=-10,
block_dy=5):
np.random.seed(1)
# Initiate I/O class for DC
IO = DC.IO()
# Obtain ABMN locations
xmin, xmax = 0., 200.
ymin, ymax = 0., 0.
zmin, zmax = 0, 0
endl = np.array([[xmin, ymin, zmin], [xmax, ymax, zmax]])
# Generate DC survey object
survey = DC.Utils.gen_DCIPsurvey(endl,
survey_type=survey_type,
dim=2,
a=10,
b=10,
n=10)
survey.getABMN_locations()
survey = IO.from_ambn_locations_to_survey(survey.a_locations,
survey.b_locations,
survey.m_locations,
survey.n_locations,
survey_type,
data_dc_type='volt')
# Obtain 2D TensorMesh
mesh, actind = IO.set_mesh()
# Flat topography
actind = Utils.surface2ind_topo(mesh, np.c_[mesh.vectorCCx,
mesh.vectorCCx * 0.])
survey.drapeTopo(mesh, actind, option="top")
# Use Exponential Map: m = log(rho)
actmap = Maps.InjectActiveCells(mesh,
indActive=actind,
valInactive=np.log(1e8))
parametric_block = Maps.ParametricBlock(mesh, slopeFact=1e2)
mapping = Maps.ExpMap(mesh) * parametric_block
# Set true model
# val_background,val_block, block_x0, block_dx, block_y0, block_dy
mtrue = np.r_[np.log(1e3), np.log(10), 100, 10, -20, 10]
# Set initial model
m0 = np.r_[np.log(rho_background),
np.log(rho_block), block_x0, block_dx, block_y0, block_dy]
rho = mapping * mtrue
rho0 = mapping * m0
# Show the true conductivity model
fig = plt.figure(figsize=(12, 3))
ax = plt.subplot(111)
temp = rho.copy()
temp[~actind] = np.nan
out = mesh.plotImage(temp,
grid=False,
ax=ax,
gridOpts={'alpha': 0.2},
clim=(10, 1000),
pcolorOpts={
"cmap": "viridis",
"norm": colors.LogNorm()
})
ax.plot(survey.electrode_locations[:, 0], survey.electrode_locations[:, 1],
'k.')
ax.set_xlim(IO.grids[:, 0].min(), IO.grids[:, 0].max())
ax.set_ylim(-IO.grids[:, 1].max(), IO.grids[:, 1].min())
cb = plt.colorbar(out[0])
cb.set_label("Resistivity (ohm-m)")
ax.set_aspect('equal')
ax.set_title("True resistivity model")
plt.show()
# Show the true conductivity model
fig = plt.figure(figsize=(12, 3))
ax = plt.subplot(111)
temp = rho0.copy()
temp[~actind] = np.nan
out = mesh.plotImage(temp,
grid=False,
ax=ax,
gridOpts={'alpha': 0.2},
clim=(10, 1000),
pcolorOpts={
"cmap": "viridis",
"norm": colors.LogNorm()
})
ax.plot(survey.electrode_locations[:, 0], survey.electrode_locations[:, 1],
'k.')
ax.set_xlim(IO.grids[:, 0].min(), IO.grids[:, 0].max())
ax.set_ylim(-IO.grids[:, 1].max(), IO.grids[:, 1].min())
cb = plt.colorbar(out[0])
cb.set_label("Resistivity (ohm-m)")
ax.set_aspect('equal')
ax.set_title("Initial resistivity model")
plt.show()
# Generate 2.5D DC problem
# "N" means potential is defined at nodes
prb = DC.Problem2D_N(mesh, rhoMap=mapping, storeJ=True, Solver=Solver)
# Pair problem with survey
try:
prb.pair(survey)
except:
survey.unpair()
prb.pair(survey)
# Make synthetic DC data with 5% Gaussian noise
dtrue = survey.makeSyntheticData(mtrue, std=0.05, force=True)
# Show apparent resisitivty pseudo-section
IO.plotPseudoSection(data=survey.dobs / IO.G,
data_type='apparent_resistivity')
# Show apparent resisitivty histogram
fig = plt.figure()
out = hist(survey.dobs / IO.G, bins=20)
plt.show()
# Set uncertainty
# floor
eps = 10**(-3.2)
# percentage
std = 0.05
dmisfit = DataMisfit.l2_DataMisfit(survey)
uncert = abs(survey.dobs) * std + eps
dmisfit.W = 1. / uncert
# Map for a regularization
mesh_1d = Mesh.TensorMesh([parametric_block.nP])
# Related to inversion
reg = Regularization.Simple(mesh_1d, alpha_x=0.)
opt = Optimization.InexactGaussNewton(maxIter=10)
invProb = InvProblem.BaseInvProblem(dmisfit, reg, opt)
beta = Directives.BetaSchedule(coolingFactor=5, coolingRate=2)
betaest = Directives.BetaEstimate_ByEig(beta0_ratio=1e0)
target = Directives.TargetMisfit()
updateSensW = Directives.UpdateSensitivityWeights()
update_Jacobi = Directives.UpdatePreconditioner()
invProb.beta = 0.
inv = Inversion.BaseInversion(invProb, directiveList=[target])
prb.counter = opt.counter = Utils.Counter()
opt.LSshorten = 0.5
opt.remember('xc')
# Run inversion
mopt = inv.run(m0)
# Convert obtained inversion model to resistivity
# rho = M(m), where M(.) is a mapping
rho_est = mapping * mopt
rho_true = rho.copy()
# show recovered conductivity
vmin, vmax = rho.min(), rho.max()
fig, ax = plt.subplots(2, 1, figsize=(20, 6))
out1 = mesh.plotImage(rho_true,
clim=(10, 1000),
pcolorOpts={
"cmap": "viridis",
"norm": colors.LogNorm()
},
ax=ax[0])
out2 = mesh.plotImage(rho_est,
clim=(10, 1000),
pcolorOpts={
"cmap": "viridis",
"norm": colors.LogNorm()
},
ax=ax[1])
out = [out1, out2]
for i in range(2):
ax[i].plot(survey.electrode_locations[:, 0],
survey.electrode_locations[:, 1], 'kv')
ax[i].set_xlim(IO.grids[:, 0].min(), IO.grids[:, 0].max())
ax[i].set_ylim(-IO.grids[:, 1].max(), IO.grids[:, 1].min())
cb = plt.colorbar(out[i][0], ax=ax[i])
cb.set_label("Resistivity ($\Omega$m)")
ax[i].set_xlabel("Northing (m)")
ax[i].set_ylabel("Elevation (m)")
ax[i].set_aspect('equal')
ax[0].set_title("True resistivity model")
ax[1].set_title("Recovered resistivity model")
plt.tight_layout()
plt.show()
def setUp(self, parallel=True):
time = np.logspace(-6, -3, 21)
hz = get_vertical_discretization_time(time,
facter_tmax=0.5,
factor_tmin=10.)
time_input_currents = wave.current_times[-7:]
input_currents = wave.currents[-7:]
n_sounding = 10
dx = 20.
hx = np.ones(n_sounding) * dx
mesh = Mesh.TensorMesh([hx, hz], x0='00')
inds = mesh.gridCC[:, 1] < 25
inds_1 = mesh.gridCC[:, 1] < 50
sigma = np.ones(mesh.nC) * 1. / 100.
sigma[inds_1] = 1. / 10.
sigma[inds] = 1. / 50.
sigma_em1d = sigma.reshape(mesh.vnC, order='F').flatten()
mSynth = np.log(sigma_em1d)
x = mesh.vectorCCx
y = np.zeros_like(x)
z = np.ones_like(x) * 30.
rx_locations = np.c_[x, y, z]
src_locations = np.c_[x, y, z]
topo = np.c_[x, y, z - 30.].astype(float)
n_sounding = rx_locations.shape[0]
rx_type_global = np.array(["dBzdt"], dtype=str).repeat(n_sounding,
axis=0)
field_type_global = np.array(['secondary'],
dtype=str).repeat(n_sounding, axis=0)
wave_type_global = np.array(['general'], dtype=str).repeat(n_sounding,
axis=0)
time_global = [time for i in range(n_sounding)]
src_type_global = np.array(["CircularLoop"],
dtype=str).repeat(n_sounding, axis=0)
a_global = np.array([13.], dtype=float).repeat(n_sounding, axis=0)
input_currents_global = [input_currents for i in range(n_sounding)]
time_input_currents_global = [
time_input_currents for i in range(n_sounding)
]
mapping = Maps.ExpMap(mesh)
survey = GlobalEM1DSurveyTD(
rx_locations=rx_locations,
src_locations=src_locations,
topo=topo,
time=time_global,
src_type=src_type_global,
rx_type=rx_type_global,
field_type=field_type_global,
wave_type=wave_type_global,
a=a_global,
input_currents=input_currents_global,
time_input_currents=time_input_currents_global)
problem = GlobalEM1DProblemTD(mesh,
sigmaMap=mapping,
hz=hz,
parallel=parallel,
n_cpu=5)
problem.pair(survey)
survey.makeSyntheticData(mSynth)
# Now set up the problem to do some minimization
dmis = DataMisfit.l2_DataMisfit(survey)
reg = Regularization.Tikhonov(mesh)
opt = Optimization.InexactGaussNewton(maxIterLS=20,
maxIter=10,
tolF=1e-6,
tolX=1e-6,
tolG=1e-6,
maxIterCG=6)
invProb = InvProblem.BaseInvProblem(dmis, reg, opt, beta=0.)
inv = Inversion.BaseInversion(invProb)
self.inv = inv
self.reg = reg
self.p = problem
self.mesh = mesh
self.m0 = mSynth
self.survey = survey
self.dmis = dmis
problem.unpair()
problem.pair(survey_r)
d = survey_r.dpred(mtrue)
survey_r.dobs = d
survey_r.std = np.ones_like(d) * 0.05
print '# of data: ', survey_r.dobs.shape
regmesh = mesh
dmis = DataMisfit.l2_DataMisfit(survey_r)
reg = Regularization.Tikhonov(
regmesh) #,mapping = mapping)#,indActive=actind)
reg.mref = miter
opt = Optimization.InexactGaussNewton(maxIter=InnerIt, tolX=1e-6)
opt.remember('xc')
invProb = InvProblem.BaseInvProblem(dmis, reg, opt)
#beta = Directives.BetaEstimate_ByEig(beta0= 10.,beta0_ratio=1e0)
reg.alpha_s = 1e-6
invProb.beta = beta
#betaSched = Directives.BetaSchedule(coolingFactor=5, coolingRate=2)
#sav0 = Directives.SaveEveryIteration()
#sav1 = Directives.SaveModelEveryIteration()
sav2 = Directives.SaveOutputDictEveryIteration()
inv = Inversion.BaseInversion(
invProb, directiveList=[sav2]) #[beta,betaSched])#sav0,sav1,
msimple = inv.run(miter)
beta = invProb.beta
if np.mod(it + 1, coolingRate) == 0:
def run(plotIt=True, survey_type="dipole-dipole", p=0., qx=2., qz=2.):
np.random.seed(1)
# Initiate I/O class for DC
IO = DC.IO()
# Obtain ABMN locations
xmin, xmax = 0., 200.
ymin, ymax = 0., 0.
zmin, zmax = 0, 0
endl = np.array([[xmin, ymin, zmin], [xmax, ymax, zmax]])
# Generate DC survey object
survey = DC.Utils.gen_DCIPsurvey(endl,
survey_type=survey_type,
dim=2,
a=10,
b=10,
n=10)
survey.getABMN_locations()
survey = IO.from_ambn_locations_to_survey(survey.a_locations,
survey.b_locations,
survey.m_locations,
survey.n_locations,
survey_type,
data_dc_type='volt')
# Obtain 2D TensorMesh
mesh, actind = IO.set_mesh()
topo, mesh1D = DC.Utils.genTopography(mesh, -10, 0, its=100)
actind = Utils.surface2ind_topo(mesh, np.c_[mesh1D.vectorCCx, topo])
survey.drapeTopo(mesh, actind, option="top")
# Build a conductivity model
blk_inds_c = Utils.ModelBuilder.getIndicesSphere(np.r_[60., -25.], 12.5,
mesh.gridCC)
blk_inds_r = Utils.ModelBuilder.getIndicesSphere(np.r_[140., -25.], 12.5,
mesh.gridCC)
layer_inds = mesh.gridCC[:, 1] > -5.
sigma = np.ones(mesh.nC) * 1. / 100.
sigma[blk_inds_c] = 1. / 10.
sigma[blk_inds_r] = 1. / 1000.
sigma[~actind] = 1. / 1e8
rho = 1. / sigma
# Show the true conductivity model
if plotIt:
fig = plt.figure(figsize=(12, 3))
ax = plt.subplot(111)
temp = rho.copy()
temp[~actind] = np.nan
out = mesh.plotImage(temp,
grid=True,
ax=ax,
gridOpts={'alpha': 0.2},
clim=(10, 1000),
pcolorOpts={
"cmap": "viridis",
"norm": colors.LogNorm()
})
ax.plot(survey.electrode_locations[:, 0],
survey.electrode_locations[:, 1], 'k.')
ax.set_xlim(IO.grids[:, 0].min(), IO.grids[:, 0].max())
ax.set_ylim(-IO.grids[:, 1].max(), IO.grids[:, 1].min())
cb = plt.colorbar(out[0])
cb.set_label("Resistivity (ohm-m)")
ax.set_aspect('equal')
plt.show()
# Use Exponential Map: m = log(rho)
actmap = Maps.InjectActiveCells(mesh,
indActive=actind,
valInactive=np.log(1e8))
mapping = Maps.ExpMap(mesh) * actmap
# Generate mtrue
mtrue = np.log(rho[actind])
# Generate 2.5D DC problem
# "N" means potential is defined at nodes
prb = DC.Problem2D_N(mesh,
rhoMap=mapping,
storeJ=True,
Solver=Solver,
verbose=True)
# Pair problem with survey
try:
prb.pair(survey)
except:
survey.unpair()
prb.pair(survey)
# Make synthetic DC data with 5% Gaussian noise
dtrue = survey.makeSyntheticData(mtrue, std=0.05, force=True)
IO.data_dc = dtrue
# Show apparent resisitivty pseudo-section
if plotIt:
IO.plotPseudoSection(data=survey.dobs / IO.G,
data_type='apparent_resistivity')
# Show apparent resisitivty histogram
if plotIt:
fig = plt.figure()
out = hist(survey.dobs / IO.G, bins=20)
plt.xlabel("Apparent Resisitivty ($\Omega$m)")
plt.show()
# Set initial model based upon histogram
m0 = np.ones(actmap.nP) * np.log(100.)
# Set uncertainty
# floor
eps = 10**(-3.2)
# percentage
std = 0.05
dmisfit = DataMisfit.l2_DataMisfit(survey)
uncert = abs(survey.dobs) * std + eps
dmisfit.W = 1. / uncert
# Map for a regularization
regmap = Maps.IdentityMap(nP=int(actind.sum()))
# Related to inversion
reg = Regularization.Sparse(mesh,
indActive=actind,
mapping=regmap,
gradientType='components')
# gradientType = 'components'
reg.norms = np.c_[p, qx, qz, 0.]
IRLS = Directives.Update_IRLS(maxIRLSiter=20,
minGNiter=1,
betaSearch=False,
fix_Jmatrix=True)
opt = Optimization.InexactGaussNewton(maxIter=40)
invProb = InvProblem.BaseInvProblem(dmisfit, reg, opt)
beta = Directives.BetaSchedule(coolingFactor=5, coolingRate=2)
betaest = Directives.BetaEstimate_ByEig(beta0_ratio=1e0)
target = Directives.TargetMisfit()
update_Jacobi = Directives.UpdatePreconditioner()
inv = Inversion.BaseInversion(invProb, directiveList=[betaest, IRLS])
prb.counter = opt.counter = Utils.Counter()
opt.LSshorten = 0.5
opt.remember('xc')
# Run inversion
mopt = inv.run(m0)
rho_est = mapping * mopt
rho_est_l2 = mapping * invProb.l2model
rho_est[~actind] = np.nan
rho_est_l2[~actind] = np.nan
rho_true = rho.copy()
rho_true[~actind] = np.nan
# show recovered conductivity
if plotIt:
vmin, vmax = rho.min(), rho.max()
fig, ax = plt.subplots(3, 1, figsize=(20, 9))
out1 = mesh.plotImage(rho_true,
clim=(10, 1000),
pcolorOpts={
"cmap": "viridis",
"norm": colors.LogNorm()
},
ax=ax[0])
out2 = mesh.plotImage(rho_est_l2,
clim=(10, 1000),
pcolorOpts={
"cmap": "viridis",
"norm": colors.LogNorm()
},
ax=ax[1])
out3 = mesh.plotImage(rho_est,
clim=(10, 1000),
pcolorOpts={
"cmap": "viridis",
"norm": colors.LogNorm()
},
ax=ax[2])
out = [out1, out2, out3]
titles = ["True", "L2", ("L%d, Lx%d, Lz%d") % (p, qx, qz)]
for i in range(3):
ax[i].plot(survey.electrode_locations[:, 0],
survey.electrode_locations[:, 1], 'kv')
ax[i].set_xlim(IO.grids[:, 0].min(), IO.grids[:, 0].max())
ax[i].set_ylim(-IO.grids[:, 1].max(), IO.grids[:, 1].min())
cb = plt.colorbar(out[i][0], ax=ax[i])
cb.set_label("Resistivity ($\Omega$m)")
ax[i].set_xlabel("Northing (m)")
ax[i].set_ylabel("Elevation (m)")
ax[i].set_aspect('equal')
ax[i].set_title(titles[i])
plt.tight_layout()
plt.show()
def run(plotIt=True, saveFig=False):
# Set up cylindrically symmeric mesh
cs, ncx, ncz, npad = 10., 15, 25, 13 # padded cyl mesh
hx = [(cs, ncx), (cs, npad, 1.3)]
hz = [(cs, npad, -1.3), (cs, ncz), (cs, npad, 1.3)]
mesh = Mesh.CylMesh([hx, 1, hz], '00C')
# Conductivity model
layerz = np.r_[-200., -100.]
layer = (mesh.vectorCCz >= layerz[0]) & (mesh.vectorCCz <= layerz[1])
active = mesh.vectorCCz < 0.
sig_half = 1e-2 # Half-space conductivity
sig_air = 1e-8 # Air conductivity
sig_layer = 5e-2 # Layer conductivity
sigma = np.ones(mesh.nCz) * sig_air
sigma[active] = sig_half
sigma[layer] = sig_layer
# Mapping
actMap = Maps.InjectActiveCells(mesh, active, np.log(1e-8), nC=mesh.nCz)
mapping = Maps.ExpMap(mesh) * Maps.SurjectVertical1D(mesh) * actMap
mtrue = np.log(sigma[active])
# ----- FDEM problem & survey ----- #
rxlocs = Utils.ndgrid([np.r_[50.], np.r_[0], np.r_[0.]])
bzr = FDEM.Rx.Point_bSecondary(rxlocs, 'z', 'real')
bzi = FDEM.Rx.Point_bSecondary(rxlocs, 'z', 'imag')
freqs = np.logspace(2, 3, 5)
srcLoc = np.array([0., 0., 0.])
print('min skin depth = ', 500. / np.sqrt(freqs.max() * sig_half),
'max skin depth = ', 500. / np.sqrt(freqs.min() * sig_half))
print('max x ', mesh.vectorCCx.max(), 'min z ', mesh.vectorCCz.min(),
'max z ', mesh.vectorCCz.max())
srcList = [
FDEM.Src.MagDipole([bzr, bzi], freq, srcLoc, orientation='Z')
for freq in freqs
]
surveyFD = FDEM.Survey(srcList)
prbFD = FDEM.Problem3D_b(mesh, sigmaMap=mapping, Solver=Solver)
prbFD.pair(surveyFD)
std = 0.03
surveyFD.makeSyntheticData(mtrue, std)
surveyFD.eps = np.linalg.norm(surveyFD.dtrue) * 1e-5
# FDEM inversion
np.random.seed(1)
dmisfit = DataMisfit.l2_DataMisfit(surveyFD)
regMesh = Mesh.TensorMesh([mesh.hz[mapping.maps[-1].indActive]])
reg = Regularization.Simple(regMesh)
opt = Optimization.InexactGaussNewton(maxIterCG=10)
invProb = InvProblem.BaseInvProblem(dmisfit, reg, opt)
# Inversion Directives
beta = Directives.BetaSchedule(coolingFactor=4, coolingRate=3)
betaest = Directives.BetaEstimate_ByEig(beta0_ratio=2.)
target = Directives.TargetMisfit()
directiveList = [beta, betaest, target]
inv = Inversion.BaseInversion(invProb, directiveList=directiveList)
m0 = np.log(np.ones(mtrue.size) * sig_half)
reg.alpha_s = 5e-1
reg.alpha_x = 1.
prbFD.counter = opt.counter = Utils.Counter()
opt.remember('xc')
moptFD = inv.run(m0)
# TDEM problem
times = np.logspace(-4, np.log10(2e-3), 10)
print('min diffusion distance ',
1.28 * np.sqrt(times.min() / (sig_half * mu_0)),
'max diffusion distance ',
1.28 * np.sqrt(times.max() / (sig_half * mu_0)))
rx = TDEM.Rx.Point_b(rxlocs, times, 'z')
src = TDEM.Src.MagDipole(
[rx],
waveform=TDEM.Src.StepOffWaveform(),
loc=srcLoc # same src location as FDEM problem
)
surveyTD = TDEM.Survey([src])
prbTD = TDEM.Problem3D_b(mesh, sigmaMap=mapping, Solver=Solver)
prbTD.timeSteps = [(5e-5, 10), (1e-4, 10), (5e-4, 10)]
prbTD.pair(surveyTD)
std = 0.03
surveyTD.makeSyntheticData(mtrue, std)
surveyTD.std = std
surveyTD.eps = np.linalg.norm(surveyTD.dtrue) * 1e-5
# TDEM inversion
dmisfit = DataMisfit.l2_DataMisfit(surveyTD)
regMesh = Mesh.TensorMesh([mesh.hz[mapping.maps[-1].indActive]])
reg = Regularization.Simple(regMesh)
opt = Optimization.InexactGaussNewton(maxIterCG=10)
invProb = InvProblem.BaseInvProblem(dmisfit, reg, opt)
# directives
beta = Directives.BetaSchedule(coolingFactor=4, coolingRate=3)
betaest = Directives.BetaEstimate_ByEig(beta0_ratio=2.)
target = Directives.TargetMisfit()
directiveList = [beta, betaest, target]
inv = Inversion.BaseInversion(invProb, directiveList=directiveList)
m0 = np.log(np.ones(mtrue.size) * sig_half)
reg.alpha_s = 5e-1
reg.alpha_x = 1.
prbTD.counter = opt.counter = Utils.Counter()
opt.remember('xc')
moptTD = inv.run(m0)
# Plot the results
if plotIt:
plt.figure(figsize=(10, 8))
ax0 = plt.subplot2grid((2, 2), (0, 0), rowspan=2)
ax1 = plt.subplot2grid((2, 2), (0, 1))
ax2 = plt.subplot2grid((2, 2), (1, 1))
fs = 13 # fontsize
matplotlib.rcParams['font.size'] = fs
# Plot the model
ax0.semilogx(sigma[active],
mesh.vectorCCz[active],
'k-',
lw=2,
label="True")
ax0.semilogx(np.exp(moptFD),
mesh.vectorCCz[active],
'bo',
ms=6,
markeredgecolor='k',
markeredgewidth=0.5,
label="FDEM")
ax0.semilogx(np.exp(moptTD),
mesh.vectorCCz[active],
'r*',
ms=10,
markeredgecolor='k',
markeredgewidth=0.5,
label="TDEM")
ax0.set_ylim(-700, 0)
ax0.set_xlim(5e-3, 1e-1)
ax0.set_xlabel('Conductivity (S/m)', fontsize=fs)
ax0.set_ylabel('Depth (m)', fontsize=fs)
ax0.grid(which='both',
color='k',
alpha=0.5,
linestyle='-',
linewidth=0.2)
ax0.legend(fontsize=fs, loc=4)
# plot the data misfits - negative b/c we choose positive to be in the
# direction of primary
ax1.plot(freqs, -surveyFD.dobs[::2], 'k-', lw=2, label="Obs (real)")
ax1.plot(freqs, -surveyFD.dobs[1::2], 'k--', lw=2, label="Obs (imag)")
dpredFD = surveyFD.dpred(moptTD)
ax1.loglog(freqs,
-dpredFD[::2],
'bo',
ms=6,
markeredgecolor='k',
markeredgewidth=0.5,
label="Pred (real)")
ax1.loglog(freqs,
-dpredFD[1::2],
'b+',
ms=10,
markeredgewidth=2.,
label="Pred (imag)")
ax2.loglog(times, surveyTD.dobs, 'k-', lw=2, label='Obs')
ax2.loglog(times,
surveyTD.dpred(moptTD),
'r*',
ms=10,
markeredgecolor='k',
markeredgewidth=0.5,
label='Pred')
ax2.set_xlim(times.min() - 1e-5, times.max() + 1e-4)
# Labels, gridlines, etc
ax2.grid(which='both', alpha=0.5, linestyle='-', linewidth=0.2)
ax1.grid(which='both', alpha=0.5, linestyle='-', linewidth=0.2)
ax1.set_xlabel('Frequency (Hz)', fontsize=fs)
ax1.set_ylabel('Vertical magnetic field (-T)', fontsize=fs)
ax2.set_xlabel('Time (s)', fontsize=fs)
ax2.set_ylabel('Vertical magnetic field (T)', fontsize=fs)
ax2.legend(fontsize=fs, loc=3)
ax1.legend(fontsize=fs, loc=3)
ax1.set_xlim(freqs.max() + 1e2, freqs.min() - 1e1)
ax0.set_title("(a) Recovered Models", fontsize=fs)
ax1.set_title("(b) FDEM observed vs. predicted", fontsize=fs)
ax2.set_title("(c) TDEM observed vs. predicted", fontsize=fs)
plt.tight_layout(pad=1.5)
if saveFig is True:
plt.savefig('example1.png', dpi=600)
####################
# Initial Model
m0 = np.median(ln_sigback) * np.ones(mapping.nP)
# Data Misfit
dmis = DataMisfit.l2_DataMisfit(survey)
# Regularization
regT = Regularization.Simple(mesh,
indActive=actind,
alpha_s=1e-6,
alpha_x=1.,
alpha_y=1.,
alpha_z=1.)
# Optimization Scheme
opt = Optimization.InexactGaussNewton(maxIter=10)
# Form the problem
opt.remember('xc')
invProb = InvProblem.BaseInvProblem(dmis, regT, opt)
# Directives for Inversions
beta = Directives.BetaEstimate_ByEig(beta0_ratio=1e+1)
Target = Directives.TargetMisfit()
betaSched = Directives.BetaSchedule(coolingFactor=5., coolingRate=2)
inv = Inversion.BaseInversion(invProb, directiveList=[beta, Target, betaSched])
# Run Inversion
minv = inv.run(m0)
# Final Plot
def run_inversion_cg(
self,
maxIter=60,
m0=0.0,
mref=0.0,
percentage=5,
floor=0.1,
chifact=1,
beta0_ratio=1.0,
coolingFactor=1,
coolingRate=1,
alpha_s=1.0,
alpha_x=1.0,
use_target=False,
):
survey, prob = self.get_problem_survey()
survey.eps = percentage
survey.std = floor
survey.dobs = self.data.copy()
self.uncertainty = percentage * abs(survey.dobs) * 0.01 + floor
m0 = np.ones(self.M) * m0
mref = np.ones(self.M) * mref
reg = Regularization.Tikhonov(
self.mesh, alpha_s=alpha_s, alpha_x=alpha_x, mref=mref
)
dmis = DataMisfit.l2_DataMisfit(survey)
dmis.W = 1.0 / self.uncertainty
opt = Optimization.InexactGaussNewton(maxIter=maxIter, maxIterCG=20)
opt.remember("xc")
opt.tolG = 1e-10
opt.eps = 1e-10
invProb = InvProblem.BaseInvProblem(dmis, reg, opt)
save = Directives.SaveOutputEveryIteration()
beta_schedule = Directives.BetaSchedule(
coolingFactor=coolingFactor, coolingRate=coolingRate
)
target = Directives.TargetMisfit(chifact=chifact)
if use_target:
directives = [
Directives.BetaEstimate_ByEig(beta0_ratio=beta0_ratio),
beta_schedule,
target,
save,
]
else:
directives = [
Directives.BetaEstimate_ByEig(beta0_ratio=beta0_ratio),
beta_schedule,
save,
]
inv = Inversion.BaseInversion(invProb, directiveList=directives)
mopt = inv.run(m0)
model = opt.recall("xc")
model.append(mopt)
pred = []
for m in model:
pred.append(survey.dpred(m))
return model, pred, save
problem = DC.Problem3D_CC(mesh, sigmaMap=mapping)
problem.pair(survey)
problem.Solver = PardisoSolver
survey.dpred(mtrue)
survey.makeSyntheticData(mtrue, std=0.05, force=True)
print '# of data: ', survey.dobs.shape
#Simple Inversion
regmesh = mesh
m0 = (-5.) * np.ones(mapping.nP)
dmis = DataMisfit.l2_DataMisfit(survey)
reg = Regularization.Tikhonov(regmesh) #,mapping = mapping)#,indActive=actind)
reg.mref = m0
opt = Optimization.InexactGaussNewton(maxIter=20, tolX=1e-6)
opt.remember('xc')
invProb = InvProblem.BaseInvProblem(dmis, reg, opt)
beta = Directives.BetaEstimate_ByEig(beta0=10., beta0_ratio=1e0)
reg.alpha_s = 1e-2
#beta = 0.
#invProb.beta = beta
betaSched = Directives.BetaSchedule(coolingFactor=5, coolingRate=2)
#sav0 = Directives.SaveEveryIteration()
#sav1 = Directives.SaveModelEveryIteration()
sav2 = Directives.SaveOutputDictEveryIteration()
inv = Inversion.BaseInversion(invProb, directiveList=[sav2, beta,
betaSched]) #sav0,sav1,
mtest = np.load('../Update_W_each_3it_5s_rademacher/finalresult.npy')
print "check misfit with W: ", dmis.eval(mtest) / survey.nD
def run(plotIt=False):
O = np.r_[-1.2, -1.]
D = np.r_[10., 10.]
x = np.r_[0., 1.]
y = np.r_[0., 1.]
print('length:', StraightRay.lengthInCell(O, D, x, y, plotIt=plotIt))
O = np.r_[0, -1.]
D = np.r_[1., 1.] * 1.5
print('length:', StraightRay.lengthInCell(O,
D,
x * 2,
y * 2,
plotIt=plotIt))
nC = 20
M = Mesh.TensorMesh([nC, nC])
y = np.linspace(0., 1., nC / 2)
rlocs = np.c_[y * 0 + M.vectorCCx[-1], y]
rx = StraightRay.Rx(rlocs, None)
srcList = [
StraightRay.Src(loc=np.r_[M.vectorCCx[0], yi], rxList=[rx]) for yi in y
]
survey = StraightRay.Survey(srcList)
problem = StraightRay.Problem(M, slownessMap=Maps.IdentityMap(M))
problem.pair(survey)
s = Utils.mkvc(Utils.ModelBuilder.randomModel(M.vnC)) + 1.
survey.dobs = survey.dpred(s)
survey.std = 0.01
# Create an optimization program
reg = Regularization.Tikhonov(M)
dmis = DataMisfit.l2_DataMisfit(survey)
opt = Optimization.InexactGaussNewton(maxIter=40)
opt.remember('xc')
invProb = InvProblem.BaseInvProblem(dmis, reg, opt)
beta = Directives.BetaSchedule()
betaest = Directives.BetaEstimate_ByEig()
inv = Inversion.BaseInversion(invProb, directiveList=[beta, betaest])
# Start the inversion with a model of zeros, and run the inversion
m0 = np.ones(M.nC) * 1.5
mopt = inv.run(m0)
if plotIt is True:
fig, ax = plt.subplots(1, 2, figsize=(8, 4))
ax[1].plot(survey.dobs)
ax[1].plot(survey.dpred(m0), 's')
ax[1].plot(survey.dpred(mopt), 'o')
ax[1].legend(['dobs', 'starting dpred', 'dpred'])
M.plotImage(s, ax=ax[0])
survey.plot(ax=ax[0])
ax[0].set_title('survey')
plt.tight_layout()
if plotIt is True:
fig, ax = plt.subplots(1, 3, figsize=(12, 4))
plt.colorbar(M.plotImage(m0, ax=ax[0])[0], ax=ax[0])
plt.colorbar(M.plotImage(mopt, ax=ax[1])[0], ax=ax[1])
plt.colorbar(M.plotImage(s, ax=ax[2])[0], ax=ax[2])
ax[0].set_title('Starting Model')
ax[1].set_title('Recovered Model')
ax[2].set_title('True Model')
plt.tight_layout()
def resolve_1Dinversions(mesh,
dobs,
src_height,
freqs,
m0,
mref,
mapping,
std=0.08,
floor=1e-14,
rxOffset=7.86):
"""
Perform a single 1D inversion for a RESOLVE sounding for Horizontal
Coplanar Coil data (both real and imaginary).
:param discretize.CylMesh mesh: mesh used for the forward simulation
:param numpy.array dobs: observed data
:param float src_height: height of the source above the ground
:param numpy.array freqs: frequencies
:param numpy.array m0: starting model
:param numpy.array mref: reference model
:param Maps.IdentityMap mapping: mapping that maps the model to electrical conductivity
:param float std: percent error used to construct the data misfit term
:param float floor: noise floor used to construct the data misfit term
:param float rxOffset: offset between source and receiver.
"""
# ------------------- Forward Simulation ------------------- #
# set up the receivers
bzr = EM.FDEM.Rx.Point_bSecondary(np.array([[rxOffset, 0., src_height]]),
orientation='z',
component='real')
bzi = EM.FDEM.Rx.Point_b(np.array([[rxOffset, 0., src_height]]),
orientation='z',
component='imag')
# source location
srcLoc = np.array([0., 0., src_height])
srcList = [
EM.FDEM.Src.MagDipole([bzr, bzi], freq, srcLoc, orientation='Z')
for freq in freqs
]
# construct a forward simulation
survey = EM.FDEM.Survey(srcList)
prb = EM.FDEM.Problem3D_b(mesh, sigmaMap=mapping, Solver=PardisoSolver)
prb.pair(survey)
# ------------------- Inversion ------------------- #
# data misfit term
survey.dobs = dobs
dmisfit = DataMisfit.l2_DataMisfit(survey)
uncert = abs(dobs) * std + floor
dmisfit.W = 1. / uncert
# regularization
regMesh = Mesh.TensorMesh([mesh.hz[mapping.maps[-1].indActive]])
reg = Regularization.Simple(regMesh)
reg.mref = mref
# optimization
opt = Optimization.InexactGaussNewton(maxIter=10)
# statement of the inverse problem
invProb = InvProblem.BaseInvProblem(dmisfit, reg, opt)
# Inversion directives and parameters
target = Directives.TargetMisfit()
inv = Inversion.BaseInversion(invProb, directiveList=[target])
invProb.beta = 2. # Fix beta in the nonlinear iterations
reg.alpha_s = 1e-3
reg.alpha_x = 1.
prb.counter = opt.counter = Utils.Counter()
opt.LSshorten = 0.5
opt.remember('xc')
# run the inversion
mopt = inv.run(m0)
return mopt, invProb.dpred, survey.dobs
m0 = mref.copy()
#sigma0 = np.ones(mesh_2d.nC) * 1e-3
#sigma0[blk1] = 1.
#m0 = np.log(sigma0[actind])
from SimPEG import (EM, Mesh, Maps, DataMisfit, Regularization,
Optimization, InvProblem, Inversion, Directives, Utils)
survey.dobs = dobs_dbdtz
survey.std = 0.05
survey.eps = 1e-14
dmisfit = DataMisfit.l2_DataMisfit(survey)
reg = Regularization.Tikhonov(
mesh_2d, alpha_s=1./mesh_2d.hx.min()**2, alpha_x=1., alpha_y=1.,
indActive=actind
)
opt = Optimization.InexactGaussNewton(maxIter=20, LSshorten=0.5)
opt.remember('xc')
invProb = InvProblem.BaseInvProblem(dmisfit, reg, opt)
# Create an inversion object
beta = Directives.BetaSchedule(coolingFactor=5, coolingRate=3)
betaest = Directives.BetaEstimate_ByEig(beta0_ratio=1.)
target=Directives.TargetMisfit()
save_model = Directives.SaveModelEveryIteration()
save = Directives.SaveOutputEveryIteration()
inv = Inversion.BaseInversion(invProb, directiveList=[beta, betaest, target, save_model, save])
prb.counter = opt.counter = Utils.Counter()
reg.mref = mref
mopt = inv.run(m0)
np.save('mopt', mopt)
