class ITC080404_DeleteDisk_AttachtoDownVm(BaseTestCase):
'''
@summary: ITC-08磁盘管理-04删除磁盘-04磁盘附加到已关机的虚拟机
'''
def setUp(self):
self.dm = super(self.__class__, self).setUp()
#创建一个虚拟机
LogPrint().info("Pre-Test-1: Create vm %s for TC."% self.dm.vm_name)
self.assertTrue(smart_create_vm(self.dm.vm_name, self.dm.vm_info))
#创建一块磁盘
'''
@note: 创建磁盘时，磁盘的sharable属性必须为false，因为共享磁盘不作为模板的一部份
'''
LogPrint().info("Pre-Test-2: Create a disk for TC.")
r= smart_create_disk(self.dm.disk_info, self.dm.disk_name)
self.assertTrue(r[0])
self.disk_id = r[1]
#将该磁盘附加到虚拟机
LogPrint().info("Pre-Test-3: Attach disk %s to vm %s for TC."% (self.dm.disk_name
,self.dm.vm_name))
self.vmdiskapi = VmDiskAPIs()
r=self.vmdiskapi.attachDiskToVm(self.dm.vm_name, self.disk_id)
if r['status_code'] == 200:
LogPrint().info("Attach Disk to vm success.")
else:
LogPrint().error("Attach Disk to vm fail.Status-code is wrong.")
self.assertTrue(False)
def test_DeleteDisk_AttachtoDownVm(self):
'''
@summary: 删除附加到运行虚拟机的磁盘
@note: 操作成功，验证返回状态码，验证磁盘是否存在
'''
diskapi = DiskAPIs()
self.flag = True
LogPrint().info("Test: Delete disk %s attached to down vm %s."% (self.dm.disk_name, self.dm.vm_name))
r = diskapi.deleteDisk(self.disk_id)
if r['status_code'] == self.dm.expected_status_code:
if not diskapi.isExist(self.disk_id):
LogPrint().info("PASS: Delete Disk attached to down vm SUCCESS." )
else:
LogPrint().error("FAIL: Disk is still exist. " )
self.flag = False
else:
LogPrint().error("FAIL: Returned status code is %s. "% r['status_code'])
self.flag = False
self.assertTrue(self.flag)
def tearDown(self):
LogPrint().info("Post-Test: Delete vm %s."% self.dm.vm_name)
VirtualMachineAPIs().delVm(self.dm.vm_name)
class ITC07_SetUp(BaseTestCase):
'''
@summary: 模板管理模块级测试用例，初始化模块测试环境；
@note: （1）创建一个NFS类型数据中心；
@note: （2）创建一个集群；
@note: （3）创建一个主机，并等待其变为UP状态；
@note: （4）创建3个存储域（data1/data2/Export）；
@note: （5）将 data1 附加到数据中心；
@note: （6）创建一个虚拟机
@note: （7）创建一个磁盘
@note: （8）将磁盘附加到虚拟机
'''
def setUp(self):
self.dm = super(self.__class__, self).setUp()
def test_CreateModuleTestEnv(self):
dcapi = DataCenterAPIs()
capi = ClusterAPIs()
# 创建1个数据中心（nfs类型）
LogPrint().info("Pre-Module-Test-1: Create DataCenter '%s'." %
self.dm.dc_nfs_name)
self.assertTrue(
dcapi.createDataCenter(self.dm.xml_dc_info)['status_code'] ==
self.dm.expected_status_code_create_dc)
# 创建1个集群
LogPrint().info(
"Pre-Module-Test-2: Create Cluster '%s' in DataCenter '%s'." %
(self.dm.cluster_nfs_name, self.dm.dc_nfs_name))
self.assertTrue(
capi.createCluster(self.dm.xml_cluster_info)['status_code'] ==
self.dm.expected_status_code_create_cluster)
# 在NFS数据中心中创建一个主机，并等待主机UP。
LogPrint().info(
"Pre-Module-Test-3: Create Host '%s' in Cluster '%s'." %
(self.dm.host1_name, self.dm.cluster_nfs_name))
self.assertTrue(
smart_create_host(self.dm.host1_name, self.dm.xml_host_info))
# 为NFS数据中心创建Data（data1/data2/export）。
@BaseTestCase.drive_data(self, self.dm.xml_storage_info)
def create_storage_domains(xml_storage_domain_info):
sd_name = xmltodict.parse(
xml_storage_domain_info)['storage_domain']['name']
LogPrint().info("Pre-Module-Test-4: Create Data Storage '%s'." %
sd_name)
self.assertTrue(
smart_create_storage_domain(sd_name, xml_storage_domain_info))
create_storage_domains()
# 将创建的的data1、data2和export域附加到NFS/ISCSI数据中心里。
LogPrint().info(
"Pre-Module-Test-5: Attach the data storages to data centers.")
self.assertTrue(
smart_attach_storage_domain(self.dm.dc_nfs_name,
self.dm.data1_nfs_name))
self.assertTrue(
smart_attach_storage_domain(self.dm.dc_nfs_name,
self.dm.data2_nfs_name))
#self.assertTrue(smart_attach_storage_domain(self.dm.dc_nfs_name, self.dm.export1_name))
#创建一个虚拟机
self.vmapi = VirtualMachineAPIs()
r = self.vmapi.createVm(self.dm.vm_info)
if r['status_code'] == 201:
self.vm_name = r['result']['vm']['name']
else:
LogPrint().error("Create vm failed.Status-code is WRONG.")
self.assertTrue(False)
#创建一个磁盘
self.diskapi = DiskAPIs()
sd_id = StorageDomainAPIs().getStorageDomainIdByName(
ModuleData.data1_nfs_name)
r = self.diskapi.createDisk(self.dm.disk_info, sd_id)
def is_disk_ok():
return self.diskapi.getDiskStatus(self.disk_id) == 'ok'
if r['status_code'] == 202:
self.disk_id = r['result']['disk']['@id']
if wait_until(is_disk_ok, 200, 5):
LogPrint().info("Create disk ok.")
else:
LogPrint().error("Create disk failed.Status-code is WRONG.")
self.assertTrue(False)
#将磁盘附加到虚拟机
self.vmdiskapi = VmDiskAPIs()
r = self.vmdiskapi.attachDiskToVm(self.vm_name, self.disk_id)
if r['status_code'] == 200:
LogPrint().info("Attach Disk to vm SUCCESS.")
else:
LogPrint().error("Attach Disk to vm fail.Status-code is WRONG.")
self.assertTrue(False)
class ITC080402_DeleteDisk_AttachtoTemp(BaseTestCase):
'''
@summary: ITC-08磁盘管理-04删除磁盘-02磁盘附加到模板上
'''
def setUp(self):
self.dm = super(self.__class__, self).setUp()
#创建一个虚拟机
LogPrint().info("Pre-Test-1: Create vm %s for TC."% self.dm.vm_name)
self.assertTrue(smart_create_vm(self.dm.vm_name, self.dm.vm_info))
#创建一块磁盘
'''
@note: 创建磁盘时，磁盘的sharable属性必须为false，因为共享磁盘不作为模板的一部份
'''
LogPrint().info("Pre-Test-2: Create a disk for TC.")
r= smart_create_disk(self.dm.disk_info, self.dm.disk_name)
self.assertTrue(r[0])
self.disk_id = r[1]
#将该磁盘附加到虚拟机上
LogPrint().info("Pre-Test-3: Attach disk %s to vm %s for TC."% (self.dm.disk_name
,self.dm.vm_name))
self.vmdiskapi = VmDiskAPIs()
r=self.vmdiskapi.attachDiskToVm(self.dm.vm_name, self.disk_id)
if r['status_code'] == 200:
LogPrint().info("Attach Disk to vm success.")
else:
LogPrint().error("Attach Disk to vm fail.Status-code is wrong.")
self.assertTrue(False)
#该虚拟机创建模板
LogPrint().info("Pre-Test-4: Create template for vm %s for TC."% self.dm.vm_name)
self.tempapi = TemplatesAPIs()
self.vm_id = VirtualMachineAPIs().getVmIdByName(self.dm.vm_name)
r = self.tempapi.createTemplate(self.dm.temp_info, self.vm_id)
def is_temp_ok():
return self.tempapi.getTemplateInfo(temp_name=self.dm.temp_name)['result']['template']['status']['state']=='ok'
if r['status_code'] == 202:
if wait_until(is_temp_ok, 600, 10):
LogPrint().info("Create Template ok.")
else:
LogPrint().error("Create Template overtime")
self.assertTrue(False)
else:
LogPrint().error("Create Template failed.Status-code is wrong.")
self.assertTrue(False)
#获得模板关联的磁盘id
r = TemplateDisksAPIs().getTemplateDiskInfo(self.dm.temp_name, self.dm.disk_name)
if r['status_code'] == 200:
self.disk_id_temp = r['result']['disk']['@id']
else:
self.assertTrue(False)
def test_DeleteDisk_AttachtoTemp(self):
'''
@summary: 删除附加到模板的磁盘
@note: 操作失败，验证返回验证码及报错信息
'''
self.flag = True
LogPrint().info("Test: Delete disk attached to template.")
r = DiskAPIs().deleteDisk(self.disk_id_temp)
if r['status_code'] == self.dm.expected_status_code:
dictCompare = DictCompare()
if dictCompare.isSubsetDict(xmltodict.parse(self.dm.expected_info), r['result']):
LogPrint().info("PASS: The returned status code and messages are CORRECT.")
else:
LogPrint().error("FAIL: The returned messages are INCORRECT.")
self.flag = False
else:
LogPrint().error("FAIL: The returned status code is '%s' while it should be '%s'." % (r['status_code'], self.dm.expected_status_code))
self.flag = False
self.assertTrue(self.flag)
def tearDown(self):
LogPrint().info("Post-Test-1: Delete template %s."% self.dm.temp_name)
self.assertTrue(smart_delete_template(self.dm.temp_name))
LogPrint().info("Post-Test-2: Delete vm %s."% self.dm.vm_name)
self.assertTrue(smart_del_vm(self.dm.vm_name))
class ITC080403_DeleteDisk_AttachtoRunVm(BaseTestCase):
'''
@summary: ITC-08磁盘管理-04删除磁盘-03磁盘附加到运行的虚拟机上
'''
def setUp(self):
self.dm = super(self.__class__, self).setUp()
self.diskapi = DiskAPIs()
#创建一个虚拟机
LogPrint().info("Pre-Test-1: Create vm %s for TC."% self.dm.vm_name)
self.assertTrue(smart_create_vm(self.dm.vm_name, self.dm.vm_info))
#创建一块磁盘
'''
@note: 创建磁盘时，磁盘的sharable属性必须为false，因为共享磁盘不作为模板的一部份
'''
LogPrint().info("Pre-Test-2: Create a disk for TC.")
r= smart_create_disk(self.dm.disk_info, self.dm.disk_name)
self.assertTrue(r[0])
self.disk_id = r[1]
#将该磁盘附加到虚拟机
LogPrint().info("Pre-Test-3: Attach disk %s to vm %s for TC."% (self.dm.disk_name
,self.dm.vm_name))
self.vmdiskapi = VmDiskAPIs()
r=self.vmdiskapi.attachDiskToVm(self.dm.vm_name, self.disk_id)
if r['status_code'] == 200:
LogPrint().info("Attach Disk to vm success.")
else:
LogPrint().error("Attach Disk to vm fail.Status-code is wrong.")
self.assertTrue(False)
#启动虚拟机
LogPrint().info("Pre-Test-4: Start vm for TC.")
self.assertTrue(smart_start_vm(self.dm.vm_name))
#激活磁盘
LogPrint().info("Pre-Test-5: Active vmdisk for TC.")
self.assertTrue(smart_active_vmdisk(self.dm.vm_name,self.disk_id))
def test_DeleteDisk_AttachtoRunVm(self):
'''
@summary: 删除附加到运行虚拟机的磁盘
@note: 操作失败，验证返回状态码和报错信息
'''
self.flag = True
LogPrint().info("Test: Delete disk %s attached to running vm %s."% (self.dm.disk_name, self.dm.vm_name))
r = self.diskapi.deleteDisk(self.disk_id)
if r['status_code'] == self.dm.expected_status_code:
dictCompare = DictCompare()
if dictCompare.isSubsetDict(xmltodict.parse(self.dm.expected_info), r['result']):
LogPrint().info("PASS: The returned status code and messages are CORRECT.")
else:
LogPrint().error("FAIL: The returned messages are INCORRECT.")
self.flag = False
else:
LogPrint().error("FAIL: The returned status code is '%s' while it should be '%s'." % (r['status_code'], self.dm.expected_status_code))
self.flag = False
self.assertTrue(self.flag)
def tearDown(self):
self.flag = True
LogPrint().info("Post-Test-1: Stop vm %s."%self.dm.vm_name)
self.assertTrue(smart_stop_vm(self.dm.vm_name))
LogPrint().info("Post-Test-2: Delete vm %s."%self.dm.vm_name)
self.assertTrue(smart_del_vm(self.dm.vm_name))
class ITC07_SetUp(BaseTestCase):
'''
@summary: 模板管理模块级测试用例，初始化模块测试环境；
@note: （1）创建一个NFS类型数据中心；
@note: （2）创建一个集群；
@note: （3）创建一个主机，并等待其变为UP状态；
@note: （4）创建3个存储域（data1/data2/Export）；
@note: （5）将 data1 附加到数据中心；
@note: （6）创建一个虚拟机
@note: （7）创建一个磁盘
@note: （8）将磁盘附加到虚拟机
'''
def setUp(self):
self.dm = super(self.__class__, self).setUp()
def test_CreateModuleTestEnv(self):
dcapi = DataCenterAPIs()
capi = ClusterAPIs()
# 创建1个数据中心（nfs类型）
LogPrint().info("Pre-Module-Test-1: Create DataCenter '%s'." % self.dm.dc_nfs_name)
self.assertTrue(dcapi.createDataCenter(self.dm.xml_dc_info)['status_code']==self.dm.expected_status_code_create_dc)
# 创建1个集群
LogPrint().info("Pre-Module-Test-2: Create Cluster '%s' in DataCenter '%s'." % (self.dm.cluster_nfs_name, self.dm.dc_nfs_name))
self.assertTrue(capi.createCluster(self.dm.xml_cluster_info)['status_code']==self.dm.expected_status_code_create_cluster)
# 在NFS数据中心中创建一个主机，并等待主机UP。
LogPrint().info("Pre-Module-Test-3: Create Host '%s' in Cluster '%s'." % (self.dm.host1_name, self.dm.cluster_nfs_name))
self.assertTrue(smart_create_host(self.dm.host1_name, self.dm.xml_host_info))
# 为NFS数据中心创建Data（data1/data2/export）。
@BaseTestCase.drive_data(self, self.dm.xml_storage_info)
def create_storage_domains(xml_storage_domain_info):
sd_name = xmltodict.parse(xml_storage_domain_info)['storage_domain']['name']
LogPrint().info("Pre-Module-Test-4: Create Data Storage '%s'." % sd_name)
self.assertTrue(smart_create_storage_domain(sd_name, xml_storage_domain_info))
create_storage_domains()
# 将创建的的data1、data2和export域附加到NFS/ISCSI数据中心里。
LogPrint().info("Pre-Module-Test-5: Attach the data storages to data centers.")
self.assertTrue(smart_attach_storage_domain(self.dm.dc_nfs_name, self.dm.data1_nfs_name))
self.assertTrue(smart_attach_storage_domain(self.dm.dc_nfs_name, self.dm.data2_nfs_name))
#self.assertTrue(smart_attach_storage_domain(self.dm.dc_nfs_name, self.dm.export1_name))
#创建一个虚拟机
self.vmapi = VirtualMachineAPIs()
r = self.vmapi.createVm(self.dm.vm_info)
if r['status_code'] == 201:
self.vm_name = r['result']['vm']['name']
else:
LogPrint().error("Create vm failed.Status-code is WRONG.")
self.assertTrue(False)
#创建一个磁盘
self.diskapi = DiskAPIs()
sd_id = StorageDomainAPIs().getStorageDomainIdByName(ModuleData.data1_nfs_name)
r = self.diskapi.createDisk(self.dm.disk_info, sd_id)
def is_disk_ok():
return self.diskapi.getDiskStatus(self.disk_id)=='ok'
if r['status_code'] == 202:
self.disk_id = r['result']['disk']['@id']
if wait_until(is_disk_ok, 200, 5):
LogPrint().info("Create disk ok.")
else:
LogPrint().error("Create disk failed.Status-code is WRONG.")
self.assertTrue(False)
#将磁盘附加到虚拟机
self.vmdiskapi = VmDiskAPIs()
r=self.vmdiskapi.attachDiskToVm(self.vm_name, self.disk_id)
if r['status_code'] == 200:
LogPrint().info("Attach Disk to vm SUCCESS.")
else:
LogPrint().error("Attach Disk to vm fail.Status-code is WRONG.")
self.assertTrue(False)
