def myDvConfig1(theChainDef, chainDict, inputTEsEF, numberOfSubChainDicts=1):
print "*******WARNING********"
print "This Configuration should not be used!!"
print "Use instead the '_split' version of the chain"
print "*****END-WARNING******"
L2ChainName = "L2_" + chainDict['chainName']
EFChainName = "EF_" + chainDict['chainName']
HLTChainName = "HLT_" + chainDict['chainName']
chainParts = chainDict['chainParts']
btagthresh = chainParts['threshold']
btagmult = chainParts['multiplicity']
btagcut = chainParts['bTag']
btagcut = btagcut[1:]
btracking = chainParts['bTracking']
#import fexes/hypos
# -- Using al the TE separately
from TrigBjetHypo.TrigEFBjetSequenceAllTEConfig import getEFBjetAllTEInstance
ef_bjetSequence = getEFBjetAllTEInstance()
from TrigBjetHypo.TrigBjetEtHypoConfig import getBjetEtHypoInstance
ef_ethypo_startseq = getBjetEtHypoInstance("EF", "StartSequence", "35GeV")
from InDetTrigRecExample.EFInDetConfig import TrigEFIDSequence
if 'EFID' in btracking:
ef_bjet_tracks = TrigEFIDSequence("Bjet", "bjet",
"InsideOut").getSequence()
else:
from TrigFastTrackFinder.TrigFastTrackFinder_Config import TrigFastTrackFinder_Jet
theTrigFastTrackFinder_Jet = [TrigFastTrackFinder_Jet()]
from TrigInDetConf.TrigInDetSequence import TrigInDetSequence
theFastTrackFinderxAOD = TrigInDetSequence("Bjet", "bjet",
"FastxAOD").getSequence()
ef_bjet_tracks = TrigEFIDSequence("Bjet", "bjet",
"DataPrep").getSequence()
ef_bjet_tracks += theTrigFastTrackFinder_Jet
ef_bjet_tracks += theFastTrackFinderxAOD
ef_bjet_tracks += TrigEFIDSequence("Bjet", "bjet",
"InsideOutMerged").getSequence()
from TrigT2HistoPrmVtx.TrigT2HistoPrmVtxAllTEConfig import EFHistoPrmVtxAllTE_Jet
from TrigT2HistoPrmVtx.TrigT2HistoPrmVtxComboConfig import EFHistoPrmVtxCombo_Jet
from InDetTrigVxSecondary.InDetTrigVxSecondary_LoadTools import TrigVxSecondary_EF
ef_VxSecondary_EF = TrigVxSecondary_EF()
from TrigBjetHypo.TrigBjetEtHypoConfig import getBjetEtHypoInstance
ef_EtHypo_Btagging = getBjetEtHypoInstance("EF", "Btagging",
btagthresh + "GeV")
# DV FEX
from TrigBjetHypo.TrigDvFexConfig import getDvFexInstance
ef_dvfex = getDvFexInstance("EF", "EFID")
# dv hypo
from TrigBjetHypo.TrigDvHypoConfig import getDvHypoInstance
ef_hypo = getDvHypoInstance("EF")
#if ('boffperf' in chainParts['bTag']):
# from TrigBjetHypo.TrigBtagFexConfig import getBtagFexInstance
# ef_bjet = getBtagFexInstance("EF","2012","EFID")
#else:
# from TrigBjetHypo.TrigBjetFexConfig import getBjetFexInstance
# ef_bjet = getBjetFexInstance("EF","2012","EFID")
#
#if ('bperf' in chainParts['bTag'] or 'boffperf' in chainParts['bTag']):
# from TrigBjetHypo.TrigBjetHypoConfig import getBjetHypoNoCutInstance
# ef_hypo = getBjetHypoNoCutInstance("EF")
#else:
# from TrigBjetHypo.TrigBjetHypoConfig import getBjetHypoInstance
# ef_hypo = getBjetHypoInstance("EF","2012", btagcut)
#------- 2012 EF Sequences based on j35 intput TE-------
# TE naming
ef2 = 'HLT_BjetSeed'
ef3 = 'HLT_BjetSeed_EtCut%sGeV' % btagthresh
if ('EFID' in chainParts['bTracking']):
ef4 = 'HLT_BjetSeed_EtCut%sGeV_EFID' % btagthresh
ef5 = 'HLT_BjetSeed_EtCut%sGeV_AllTEPrmVtx_EFID' % btagthresh
ef6 = 'HLT_BjetSeed_EtCut%sGeV_ComboPrmVtx_EFID' % btagthresh
else:
ef4 = 'HLT_BjetSeed_EtCut%sGeV_IDTrig' % btagthresh
ef5 = 'HLT_BjetSeed_EtCut%sGeV_AllTEPrmVtx_IDTrig' % btagthresh
ef6 = 'HLT_BjetSeed_EtCut%sGeV_ComboPrmVtx_IDTrig' % btagthresh
if (btagmult == '1'):
ef7 = 'EF_b%s_%s_%s_VxSecondaryAndBTagHypo' % (
btagthresh,
btagcut,
chainParts['chainPartName'].replace("_" + chainParts['bTracking'],
""),
)
else:
ef7 = 'EF_%sb%s_%s_%s_VxSecondaryAndBTagHypo' % (
btagmult, btagthresh, btagcut, chainParts['chainPartName'].replace(
"_" + chainParts['bTracking'], ""))
theChainDef.addSequence([ef_bjetSequence], inputTEsEF, ef2)
theChainDef.addSequence(ef_ethypo_startseq, ef2, ef3)
theChainDef.addSequence(ef_bjet_tracks, ef3, ef4)
theChainDef.addSequence([EFHistoPrmVtxAllTE_Jet()], ef4, ef5)
theChainDef.addSequence([EFHistoPrmVtxCombo_Jet()], [ef4, ef5], ef6)
#theChainDef.addSequence([ef_EtHypo_Btagging], ef6, ef7)
theChainDef.addSequence([ef_VxSecondary_EF, ef_EtHypo_Btagging], ef6, ef7)
lastTEout = "EF_" + chainParts[
'chainPartName'] if numberOfSubChainDicts > 1 else EFChainName
theChainDef.addSequence([ef_dvfex, ef_hypo], ef7, lastTEout)
theChainDef.addSignature(
theChainDef.signatureList[-1]['signature_counter'] + 1,
[lastTEout] * int(btagmult))
return theChainDef
def myBjetConfig1(theChainDef, chainDict, inputTEsEF, numberOfSubChainDicts=1):
useTRT = 'noTRT' not in chainDict['chainParts']['extra']
EFChainName = "EF_bjet_" + chainDict['chainName']
chainParts = chainDict['chainParts']
btagthresh = chainParts['threshold']
btagmult = chainParts['multiplicity']
btagcut = chainParts['bTag']
btagcut = btagcut[1:]
#import fexes/hypos
ef_bjetSequence = getEFBjetAllTEInstance()
if (int(btagthresh) == 0):
ef_ethypo_startseq = getBjetEtHypoInstance("EF", "StartSequence",
"0GeV")
elif (int(btagthresh) < 35):
ef_ethypo_startseq = getBjetEtHypoInstance("EF", "StartSequence",
"15GeV")
else:
ef_ethypo_startseq = getBjetEtHypoInstance("EF", "StartSequence",
"35GeV")
# tracking
if useTRT:
[trkvtx, trkftf,
trkprec] = TrigInDetSequence("Bjet",
"bjet",
"IDTrig",
sequenceFlavour=["2step"]).getSequence()
else:
[trkvtx, trkftf,
trkprec] = TrigInDetSequence("Bjet",
"bjet",
"IDTrig",
sequenceFlavour=["2step",
"noTRT"]).getSequence()
ef_bjet_tracks = trkftf + trkprec
ef_VxSecondary_EF = TrigVxSecondary_EF()
ef_EtHypo_Btagging = getBjetEtHypoInstance("EF", "Btagging",
btagthresh + "GeV")
# B-tagging
if ('boffperf' in chainParts['bTag'] or 'bmv2c20' in chainParts['bTag']
or 'bmv2c10' in chainParts['bTag']
or 'bhmv2c10' in chainParts['bTag']):
ef_bjet = getBtagFexInstance("EF", "2012", "EFID")
else:
ef_bjet = getBjetFexInstance("EF", "2012", "EFID")
# Hypo testing
if ('bperf' in chainParts['bTag'] or 'boffperf' in chainParts['bTag']):
ef_hypo = getBjetHypoNoCutInstance("EF")
elif ('bmv2c20' in chainParts['bTag']):
ef_hypo = getBjetHypoInstance("EF", "2015", btagcut)
elif ('bmv2c10' in chainParts['bTag']):
ef_hypo = getBjetHypoInstance("EF", "2017", btagcut)
elif ('bhmv2c10' in chainParts['bTag']):
ef_hypo = getBjetHypoInstance("EF", "2018", btagcut)
else:
ef_hypo = getBjetHypoInstance("EF", "2012", btagcut)
#------- 2012 EF Sequences based on j35 intput TE-------
# TE naming
ef2 = 'HLT_Bj'
ef3 = 'HLT_Bj_EtCut%s' % btagthresh
if ('EFID' in chainParts['bTracking']):
ef4 = 'HLT_Bj_EtCut%s_EFID' % btagthresh
ef5 = 'HLT_Bj_EtCut%s_AllTEPrmVtx_EFID' % btagthresh
ef6 = 'HLT_Bj_EtCut%s_ComboPrmVtx_EFID' % btagthresh
elif not useTRT:
ef4 = 'HLT_Bj_EtCut%s_IDTrig_noTRT' % btagthresh
ef5 = 'HLT_Bj_EtCut%s_AllTEPrmVtx_IDTrig_noTRT' % btagthresh
ef6 = 'HLT_Bj_EtCut%s_ComboPrmVtx_IDTrig_noTRT' % btagthresh
else:
ef4 = 'HLT_Bj_EtCut%s_IDTrig' % btagthresh
ef5 = 'HLT_Bj_EtCut%s_AllTEPrmVtx_IDTrig' % btagthresh
ef6 = 'HLT_Bj_EtCut%s_ComboPrmVtx_IDTrig' % btagthresh
if (btagmult == '1'):
if not useTRT:
ef7 = 'EF_b%s_%s_%s_SecVxBhypo' % (
btagthresh,
btagcut,
chainParts['chainPartName'].replace(
"_" + chainParts['bTracking'] + "_noTRT", ""),
)
else:
ef7 = 'EF_b%s_%s_%s_SecVxBhypo' % (
btagthresh,
btagcut,
chainParts['chainPartName'].replace(
"_" + chainParts['bTracking'], ""),
)
else:
if not useTRT:
ef7 = 'EF_%sb%s_%s_%s_SecVxBhypo' % (
btagmult, btagthresh, btagcut,
chainParts['chainPartName'].replace(
"_" + chainParts['bTracking'] + "noTRT", ""))
else:
ef7 = 'EF_%sb%s_%s_%s_SecVxBhypo' % (
btagmult, btagthresh, btagcut,
chainParts['chainPartName'].replace(
"_" + chainParts['bTracking'], ""))
lastTEout = "EF_bj_" + chainParts[
'chainPartName'] if numberOfSubChainDicts > 1 else EFChainName
if not useTRT: lastTEout = lastTEout + "_noTRT"
topoThresh = chainDict['topoThreshold']
topoStartFrom = setupTopoStartFrom(topoThresh,
theChainDef) if topoThresh else None
if topoStartFrom:
lastTEout = lastTEout + '_tsf'
theChainDef.addSequence([ef_bjetSequence], inputTEsEF, ef2)
theChainDef.addSequence(ef_ethypo_startseq, ef2, ef3)
theChainDef.addSequence(ef_bjet_tracks, ef3, ef4)
theChainDef.addSequence([EFHistoPrmVtxAllTE_Jet()], ef4, ef5)
theChainDef.addSequence([EFHistoPrmVtxCombo_Jet()], [ef4, ef5], ef6)
#theChainDef.addSequence([ef_EtHypo_Btagging], ef6, ef7)
theChainDef.addSequence([ef_VxSecondary_EF, ef_EtHypo_Btagging], ef6, ef7)
theChainDef.addSequence([ef_bjet, ef_hypo],
ef7,
lastTEout,
topo_start_from=topoStartFrom)
theChainDef.addSignature(
theChainDef.signatureList[-1]['signature_counter'] + 1,
[lastTEout] * int(btagmult))
return theChainDef
def myBjetConfig_split(theChainDef,
chainDict,
inputTEsEF,
numberOfSubChainDicts=1):
useTRT = 'noTRT' not in chainDict['chainParts']['extra']
log.debug("In myBjetConfig_split")
EFChainName = "EF_bjet_" + chainDict['chainName']
chainParts = chainDict['chainParts']
btagthresh = chainParts['threshold']
gscthresh = chainParts['gscThreshold'] if ('gscThreshold'
in chainParts) else ''
btagmult = chainParts['multiplicity']
btagcut = chainParts['bTag']
btagcut = btagcut[1:]
#-----------------------------------------------------------------------------------
# Import of algs
#-----------------------------------------------------------------------------------
algoInstance = "EF"
#--------------------
# super ROI building
theSuperRoi = getSuperRoiBuilderAllTEInstance()
#--------------------
# jet splitting
theJetSplit = getJetSplitterAllTEInstance()
#--------------------
#find jets far away from a muon (for mu-jet chains with b-jet requirements only)
if any('antimatchdr' in bM for bM in chainParts['bMatching']):
# Extract the dR value from the chain name here.. the deltaR value has to consist of 2 numbers
deltaR = -1
for anti_match_part in chainParts['bMatching']:
if 'dr' in anti_match_part:
deltaR = anti_match_part.split('dr')[1][0:2]
if deltaR == -1: log.error("No DeltaR cut could be extracted!")
theFarawayJet = getFarawayJetFinderAllTEInstance(str(deltaR))
algoInstance = "MuJetChain"
#--------------------
# Et hypo (for b-tagging)
#from TrigBjetHypo.TrigBjetEtHypoConfig import getBjetEtHypoInstance
theBjetEtHypo = getBjetEtHypoInstance(algoInstance, "Btagging",
btagthresh + "GeV")
#--------------------
# tracking
if useTRT:
[trkvtx, trkftf,
trkprec] = TrigInDetSequence("Bjet",
"bjet",
"IDTrig",
sequenceFlavour=["2step"]).getSequence()
else:
[trkvtx, trkftf,
trkprec] = TrigInDetSequence("Bjet",
"bjet",
"IDTrig",
sequenceFlavour=["2step",
"noTRT"]).getSequence()
# for b-tagging
theBjetTracks = trkftf + trkprec
# for vertexing
## theVertexTracks = trkvtx
#--------------------
# primary vertexing
#--------------------
# GSC
if ('gscThreshold' in chainParts) and chainParts['gscThreshold']:
theGSCFex = getGSCFexSplitInstance(algoInstance)
#from TrigBjetHypo.TrigBjetEtHypoConfig import getBjetEtHypoInstance
theGSCEtHypo = getBjetEtHypoInstance(
"GSC", "Btagging",
gscthresh.replace("gsc", "") + "GeV")
#--------------------
# secondary vertexing
theVxSecondary = TrigVxSecondaryCombo_EF()
#--------------------
# bjet fex
# if ('boffperf' in chainParts['bTag'] or 'bmv2c20' in chainParts['bTag']):
# # Offline taggers
# from TrigBjetHypo.TrigBtagFexConfig import getBtagFexSplitInstance
# theBjetFex = getBtagFexSplitInstance(algoInstance,"2012","EFID")
# else:
# # Run 1 style taggers
# from TrigBjetHypo.TrigBjetFexConfig import getBjetFexSplitInstance
# theBjetFex = getBjetFexSplitInstance(algoInstance,"2012","EFID")
if ('boffperf' in chainParts['bTag'] or 'bmv2c20' in chainParts['bTag']
or 'bmv2c10' in chainParts['bTag']
or 'bhmv2c10' in chainParts['bTag']):
# Offline taggers
theBjetFex = getBtagFexSplitInstance(algoInstance, "2012", "EFID")
else:
# Run 1 style taggers
theBjetFex = getBjetFexSplitInstance(algoInstance, "2012", "EFID")
#--------------------
# bjet hypo
if ('bperf' in chainParts['bTag'] or 'boffperf' in chainParts['bTag']):
# Performance chains (run 1 and run 2 style)
# Runs in NoCut mode
theBtagReq = getBjetHypoSplitNoCutInstance(algoInstance)
elif ('bmv2c20' in chainParts['bTag']):
# MV2c20 tagger series
theBtagReq = getBjetHypoSplitInstance(algoInstance, "2015", btagcut)
elif ('bmv2c10' in chainParts['bTag']):
# MV2c10 tagger series
theBtagReq = getBjetHypoSplitInstance(algoInstance, "2017", btagcut)
elif ('bhmv2c10' in chainParts['bTag']):
# MV2c10hybrid tagger series
theBtagReq = getBjetHypoSplitInstance(algoInstance, "2018", btagcut)
else:
# Run 1 style chains
theBtagReq = getBjetHypoSplitInstance(algoInstance, "2012", btagcut)
#-----------------------------------------------------------------------------------
# TE naming
#-----------------------------------------------------------------------------------
tracking = "IDTrig"
if 'noTRT' in chainParts['extra']:
tracking = "IDTrig_noTRT"
jetEtHypoTE = "HLT_j" + btagthresh
jetHypoTE = "HLT_j" + btagthresh + "_eta"
jetSplitTE = jetHypoTE + "_jsplit"
jetTrackTE = jetSplitTE + "_" + tracking
if not useTRT:
jetEtHypoTE = jetEtHypoTE + "_noTRT"
jetSplitTE = jetSplitTE + "_noTRT"
jetFarawayTE = jetSplitTE + "_faraway"
gsc_jetTrackTEPreCut = "HLT_precut_gsc" + btagthresh + "_eta" + "_jsplit" + "_" + tracking
gsc_jetTrackTE = "HLT_" + gscthresh + "_eta" + "_jsplit" + "_" + tracking
if any('antimatch' in bM for bM in chainParts['bMatching']) and any(
'mu' in bM for bM in chainParts['bMatching']):
# extract muon threshold from chainname
allChainParts = chainDict['chainName'].split('_')
muonthr = -1
for cp in allChainParts:
if 'mu' in cp and 'antimatch' not in cp:
muonthr = cp.split('mu')[
-1] # assume the last bit is the threshold
break
#print 'muon thr for antimatch:' + str(muonthr)
muonTE = "EF_SuperEF_mu{0}_MU{1}".format(muonthr, muonthr)
jetEtHypoTE = jetEtHypoTE + '_antimatchmu{0}'.format(muonthr)
jetHypoTE = jetHypoTE + '_antimatchmu{0}'.format(muonthr)
jetTrackTE = jetTrackTE + '_antimatchmu{0}'.format(muonthr)
superTE = "HLT_super"
superTrackingTE = superTE + tracking
prmVertexTE = superTrackingTE + "_prmVtx"
comboPrmVtxTE = prmVertexTE + "Combo"
secVtxTE = jetTrackTE + "__" + "secVtx"
lastTEout = "HLT_bjet_" + chainParts[
'chainPartName'] if numberOfSubChainDicts > 1 else EFChainName
if not useTRT:
lastTEout = lastTEout + "_noTRT"
topoThresh = chainDict['topoThreshold']
topoStartFrom = setupTopoStartFrom(topoThresh,
theChainDef) if topoThresh else None
if topoStartFrom:
lastTEout = lastTEout + '_tsf'
#-----------------------------------------------------------------------------------
# sequence assembling
#-----------------------------------------------------------------------------------
# Vertexing part of the chain
theChainDef.addSequence(theSuperRoi, inputTEsEF, superTE)
theChainDef.addSequence(trkvtx, superTE, superTrackingTE)
theChainDef.addSequence([EFHistoPrmVtxAllTE_Jet()], superTrackingTE,
prmVertexTE)
theChainDef.addSequence([EFHistoPrmVtxCombo_Jet()],
[superTrackingTE, prmVertexTE], comboPrmVtxTE)
# b-tagging part of the chain (requires PV)
theChainDef.addSequence(theJetSplit, [inputTEsEF, comboPrmVtxTE],
jetSplitTE)
#theChainDef.addSequence(theFarawayJet, [muonTE, jetSplitTE], jetFarawayTE)
#theChainDef.addSequence(theBjetEtHypo, jetFarawayTE, jetEtHypoTE)
#theChainDef.addSequence(theBjetEtHypo, jetSplitTE, jetEtHypoTE)
if any('antimatch' in bM for bM in chainParts['bMatching']) and any(
'mu' in bM for bM in chainParts['bMatching']):
theChainDef.addSequence(theFarawayJet, [muonTE, jetSplitTE],
jetFarawayTE)
jetForTrackingEtCut = jetFarawayTE
#theChainDef.addSequence(theBjetEtHypo, jetFarawayTE, jetEtHypoTE)
else:
jetForTrackingEtCut = jetSplitTE
#theChainDef.addSequence(theBjetEtHypo, jetSplitTE, jetEtHypoTE)
#Et cut before tracking
theChainDef.addSequence(theBjetEtHypo, jetForTrackingEtCut, jetEtHypoTE)
theChainDef.addSequence(theBjetTracks, jetEtHypoTE, jetTrackTE)
theChainDef.addSequence(theVxSecondary, [jetTrackTE, comboPrmVtxTE],
secVtxTE)
#GSC
if ('gscThreshold' in chainParts) and chainParts['gscThreshold']:
log.debug("Doing GSC Calculation:" + chainParts["gscThreshold"])
theChainDef.addSequence(theGSCFex, secVtxTE, gsc_jetTrackTEPreCut)
theChainDef.addSequence(theGSCEtHypo, gsc_jetTrackTEPreCut,
gsc_jetTrackTE)
jetsForBTagging = gsc_jetTrackTE
#secVtxTE = gsc_jetTrackTE+"__"+"superVtx"
else:
log.debug("No GSC Calculation")
jetsForBTagging = secVtxTE
#secVtxTE = jetTrackTE+"__"+"superVtx"
theChainDef.addSequence([theBjetFex, theBtagReq],
jetsForBTagging,
lastTEout,
topo_start_from=topoStartFrom)
theChainDef.addSignature(
theChainDef.signatureList[-1]['signature_counter'] + 1,
[lastTEout] * int(btagmult))
return theChainDef
def buildBjetChainsAllTE(theChainDef, bjetdict, numberOfSubChainDicts=1):
log.debug("In buildBjetChainsAllTE")
inputTEsEF = theChainDef.signatureList[-1]['listOfTriggerElements'][0]
useTRT = 'noTRT' not in bjetdict[0]['chainParts']['extra']
#
# Initial Config
#
###############################3
#
# Get the min threshold for tracking
# This cut is applied after the jet splitting
# So we only run precision tracking in ROIs above the minimum considered
#
minBTagThreshold = 1e9
for bjetPart in bjetdict:
thisBTagThresholdInt = int(bjetPart['chainParts']['threshold'])
if thisBTagThresholdInt < minBTagThreshold:
minBTagThreshold = thisBTagThresholdInt
log.debug("min jet Pt %s", minBTagThreshold)
#
# Configure the GSC calibration
# This cut is applied after the GSC calibration
# So we only btag ROIs above the minimum considered
#
doGSC = False
minGSCThreshold = 1e9
for bjetPart in bjetdict:
if ('gscThreshold' in bjetPart['chainParts']) and (
bjetPart['chainParts']['gscThreshold']):
doGSC = True
thisGSCThresholdInt = int(
bjetPart['chainParts']['gscThreshold'].replace("gsc", ""))
if thisGSCThresholdInt < minGSCThreshold:
minGSCThreshold = thisGSCThresholdInt
if doGSC:
log.debug("Doing GSC Calculation:" + str(minGSCThreshold) + "GeV")
#
# Now build the chain
#
###########################3
#
# super ROI building
#
theSuperRoi = getSuperRoiBuilderAllTEInstance()
superTE = "HLT_super"
theChainDef.addSequence(theSuperRoi, inputTEsEF, superTE)
#
# PV Tracking
#
if useTRT:
[trkvtx, trkftf,
trkprec] = TrigInDetSequence("Bjet",
"bjet",
"IDTrig",
sequenceFlavour=["2step"]).getSequence()
else:
[trkvtx, trkftf,
trkprec] = TrigInDetSequence("Bjet",
"bjet",
"IDTrig",
sequenceFlavour=["2step",
"noTRT"]).getSequence()
tracking = "IDTrig"
if not useTRT: tracking = tracking + "_noTRT"
superTrackingTE = superTE + tracking
theChainDef.addSequence(trkvtx, superTE, superTrackingTE)
#
# PV Finding
#
prmVertexTE = superTrackingTE + "_prmVtx"
theChainDef.addSequence([EFHistoPrmVtxAllTE_Jet()], superTrackingTE,
prmVertexTE)
comboPrmVtxTE = prmVertexTE + "Combo"
theChainDef.addSequence([EFHistoPrmVtxCombo_Jet()],
[superTrackingTE, prmVertexTE], comboPrmVtxTE)
#
# Jet splitting
#
# get the minimum et before gsc cut
theJetSplit = getJetSplitterAllTEInstance()
jetHypoTE = "HLT_j" + str(minBTagThreshold) + "_eta"
jetSplitTE = jetHypoTE + "_jsplit"
if not useTRT: jetSplitTE = jetSplitTE + "_noTRT"
theChainDef.addSequence(theJetSplit, [inputTEsEF, comboPrmVtxTE],
jetSplitTE)
#
# If do the btagging in away muons
#
algoInstance = "EF"
#
# Et cut berfore running precision tracking
#
theBjetEtHypo = getBjetEtHypoInstance(algoInstance, "Btagging",
str(minBTagThreshold) + "GeV")
jetEtHypoTE = "HLT_j" + str(minBTagThreshold)
if not useTRT: jetEtHypoTE = jetEtHypoTE + "_noTRT"
theChainDef.addSequence(theBjetEtHypo, jetSplitTE, jetEtHypoTE)
#
# Precision tracking
#
if not useTRT:
jetSplitTE = jetSplitTE.replace(
"_noTRT", "") # remove noTRT since we are adding tracking !!!!
jetTrackTE = jetSplitTE + "_" + tracking
theBjetTracks = trkftf + trkprec
theChainDef.addSequence(theBjetTracks, jetEtHypoTE, jetTrackTE)
#
# Secondary Vertexing
#
theVxSecondary = TrigVxSecondaryCombo_EF()
secVtxTE = jetTrackTE + "__" + "secVtx"
theChainDef.addSequence(theVxSecondary, [jetTrackTE, comboPrmVtxTE],
secVtxTE)
#
# GSC calculation
#
if doGSC:
gsc_jetTrackTEPreCut = "HLT_precut_gsc" + str(
minBTagThreshold) + "_eta" + "_jsplit" + "_" + tracking
theGSCFex = getGSCFexSplitInstance(algoInstance)
theChainDef.addSequence(theGSCFex, secVtxTE, gsc_jetTrackTEPreCut)
algoInstance = "GSC"
gsc_jetTrackTE = "HLT_gsc" + str(
minGSCThreshold) + "_eta" + "_jsplit" + "_" + tracking
theGSCEtHypo = getBjetEtHypoInstance(algoInstance, "Btagging",
str(minGSCThreshold) + "GeV")
theChainDef.addSequence(theGSCEtHypo, gsc_jetTrackTEPreCut,
gsc_jetTrackTE)
jetsForBTagging = gsc_jetTrackTE
else:
log.debug("No GSC Calculation")
jetsForBTagging = secVtxTE
#
# the tagging fex
#
log.debug("Getting tagging fex")
theBjetFex = getBtagFexSplitInstance(algoInstance, "2012", "EFID")
btaggingTE = jetsForBTagging + "_btagged"
theChainDef.addSequence(theBjetFex, jetsForBTagging, btaggingTE)
#
# The btagging hypo
#
log.debug("Getting tagging hypo")
lastTEout = "HLT_" + bjetdict[0]['chainName']
if not useTRT: lastTEout = lastTEout + "_noTRT"
topoThresh = bjetdict[0]['topoThreshold']
topoStartFrom = setupTopoStartFrom(topoThresh,
theChainDef) if topoThresh else None
if topoStartFrom: lastTEout = lastTEout + '_tsf'
#
# Derive multiplicity requirements
#
log.debug("Derive multiplicity requirements")
btagReqs = []
for bjetchain in bjetdict:
log.debug(bjetdict)
btagCut = bjetchain['chainParts']['bTag']
mult = bjetchain['chainParts']['multiplicity']
threshold = bjetchain['chainParts']['threshold']
if 'gscThreshold' in bjetchain['chainParts']:
threshold = bjetchain['chainParts']['gscThreshold'].replace(
"gsc", "")
btagReqs.append([threshold, btagCut, mult])
log.debug("Config the ALLTE Hypo")
name = bjetdict[0]['chainName']
theBjetHypoAllTE = getBjetHypoAllTEInstance("EF", "2017", name, btagReqs)
#theChainDef.signatureList[-1]['listOfTriggerElements'][0]
log.debug("Adding Sequence")
theChainDef.addSequence(theBjetHypoAllTE,
btaggingTE,
lastTEout,
topo_start_from=topoStartFrom)
log.debug("Adding Signature")
theChainDef.addSignature(
theChainDef.signatureList[-1]['signature_counter'] + 1, [lastTEout])
log.debug("Left buildBjetChainsAllTE")
theChainDef.chain_name = 'HLT_' + bjetdict[0]['chainName']
return theChainDef
def myBjetConfig1(theChainDef, chainDict, inputTEsEF,numberOfSubChainDicts=1):
L2ChainName = "L2_" + chainDict['chainName']
EFChainName = "EF_" + chainDict['chainName']
HLTChainName = "HLT_" + chainDict['chainName']
chainParts = chainDict['chainParts']
btagthresh = chainParts['threshold']
btagmult = chainParts['multiplicity']
btagcut = chainParts['bTag']
btagcut = btagcut[1:]
btracking = chainParts['bTracking']
#import fexes/hypos
from TrigBjetHypo.TrigEFBjetSequenceAllTEConfig import getEFBjetAllTEInstance
ef_bjetSequence=getEFBjetAllTEInstance()
from TrigBjetHypo.TrigBjetEtHypoConfig import getBjetEtHypoInstance
ef_ethypo_startseq = getBjetEtHypoInstance("EF","StartSequence","35GeV")
from InDetTrigRecExample.EFInDetConfig import TrigEFIDSequence
if 'EFID' in btracking:
ef_bjet_tracks = TrigEFIDSequence("Bjet","bjet","InsideOut").getSequence()
else:
from TrigFastTrackFinder.TrigFastTrackFinder_Config import TrigFastTrackFinder_Jet
theTrigFastTrackFinder_Jet = [TrigFastTrackFinder_Jet()]
from TrigInDetConf.TrigInDetSequence import TrigInDetSequence
theFastTrackFinderxAOD = TrigInDetSequence("Bjet","bjet","FastxAOD").getSequence()
ef_bjet_tracks = TrigEFIDSequence("Bjet","bjet","DataPrep").getSequence()
ef_bjet_tracks += theTrigFastTrackFinder_Jet
ef_bjet_tracks += theFastTrackFinderxAOD
ef_bjet_tracks += TrigEFIDSequence("Bjet","bjet","InsideOutMerged").getSequence()
from TrigT2HistoPrmVtx.TrigT2HistoPrmVtxAllTEConfig import EFHistoPrmVtxAllTE_Jet
from TrigT2HistoPrmVtx.TrigT2HistoPrmVtxComboConfig import EFHistoPrmVtxCombo_Jet
from InDetTrigVxSecondary.InDetTrigVxSecondary_LoadTools import TrigVxSecondary_EF
##from InDetTrigRecExample.EFInDetConfig import TrigVxSecondary_EF
ef_VxSecondary_EF = TrigVxSecondary_EF()
from TrigBjetHypo.TrigBjetEtHypoConfig import getBjetEtHypoInstance
ef_EtHypo_Btagging = getBjetEtHypoInstance("EF","Btagging", btagthresh+"GeV")
from TrigBjetHypo.TrigBjetFexConfig import getBjetFexInstance
ef_bjet = getBjetFexInstance("EF","2012","EFID")
if ('bperf' in chainParts['bTag'] or 'boffperf' in chainParts['bTag']):
from TrigBjetHypo.TrigBjetHypoConfig import getBjetHypoNoCutInstance
ef_hypo = getBjetHypoNoCutInstance("EF")
else:
from TrigBjetHypo.TrigBjetHypoConfig import getBjetHypoInstance
ef_hypo = getBjetHypoInstance("EF","2012", btagcut)
#------- 2012 EF Sequences based on j35 intput TE-------
# TE naming
ef2 ='HLT_BjetSeed'
ef3 ='HLT_BjetSeed_EtCut%sGeV' % btagthresh
if ('EFID' in chainParts['bTracking']):
ef4 ='HLT_BjetSeed_EtCut%sGeV_EFID' % btagthresh
ef5 ='HLT_BjetSeed_EtCut%sGeV_AllTEPrmVtx_EFID' % btagthresh
ef6 ='HLT_BjetSeed_EtCut%sGeV_ComboPrmVtx_EFID' % btagthresh
else:
ef4 ='HLT_BjetSeed_EtCut%sGeV_IDTrig' % btagthresh
ef5 ='HLT_BjetSeed_EtCut%sGeV_AllTEPrmVtx_IDTrig' % btagthresh
ef6 ='HLT_BjetSeed_EtCut%sGeV_ComboPrmVtx_IDTrig' % btagthresh
if (btagmult == '1'):
ef7 = 'EF_b%s_%s_%s_VxSecondaryAndBTagHypo' % (btagthresh, btagcut, chainParts['chainPartName'].replace("_"+chainParts['bTracking'],""), )
else:
ef7 = 'EF_%sb%s_%s_%s_VxSecondaryAndBTagHypo' % (btagmult, btagthresh, btagcut, chainParts['chainPartName'].replace("_"+chainParts['bTracking'],""))
theChainDef.addSequence([ef_bjetSequence], inputTEsEF, ef2)
theChainDef.addSequence(ef_ethypo_startseq, ef2, ef3)
theChainDef.addSequence(ef_bjet_tracks, ef3 ,ef4)
theChainDef.addSequence([EFHistoPrmVtxAllTE_Jet()], ef4, ef5)
theChainDef.addSequence([EFHistoPrmVtxCombo_Jet()], [ef4, ef5], ef6)
#theChainDef.addSequence([ef_EtHypo_Btagging], ef6, ef7)
theChainDef.addSequence([ef_VxSecondary_EF,ef_EtHypo_Btagging], ef6, ef7)
lastTEout = "EF_"+chainParts['chainPartName'] if numberOfSubChainDicts>1 else EFChainName
theChainDef.addSequence([ef_bjet, ef_hypo], ef7, lastTEout)
theChainDef.addSignature(theChainDef.signatureList[-1]['signature_counter']+1, [lastTEout]*int(btagmult))
return theChainDef
def myBjetConfig_split(theChainDef, chainDict, inputTEsEF,numberOfSubChainDicts=1):
L2ChainName = "L2_" + chainDict['chainName']
EFChainName = "EF_" + chainDict['chainName']
HLTChainName = "HLT_" + chainDict['chainName']
chainParts = chainDict['chainParts']
btagthresh = chainParts['threshold']
btagmult = chainParts['multiplicity']
btagcut = chainParts['bTag']
btagcut = btagcut[1:]
btracking = chainParts['bTracking']
#-----------------------------------------------------------------------------------
# Import of algs
#-----------------------------------------------------------------------------------
#b jet hypo
from TrigBjetHypo.TrigBjetEtHypoConfig import getBjetEtHypoInstance
theEtHypo = getBjetEtHypoInstance("EF","Btagging", btagthresh+"GeV")
#jet splitting
from TrigBjetHypo.TrigJetSplitterAllTEConfig import getJetSplitterAllTEInstance
theJetSplit=getJetSplitterAllTEInstance()
# bjet eta hypo
from TrigBjetHypo.TrigBjetEtaHypoConfig import getBjetEtaHypoInstance
theEtaHypo = getBjetEtaHypoInstance("EF", 2.5)
etaHypoCut = '2.5'
# super ROI building
from TrigBjetHypo.TrigSuperRoiBuilderAllTEConfig import getSuperRoiBuilderAllTEInstance
theSuperRoi=getSuperRoiBuilderAllTEInstance()
# tracking
from InDetTrigRecExample.EFInDetConfig import TrigEFIDSequence
if 'EFID' in btracking:
theBjet_tracks = TrigEFIDSequence("Bjet","bjet","InsideOut").getSequence()
else:
from TrigFastTrackFinder.TrigFastTrackFinder_Config import TrigFastTrackFinder_Jet
theTrigFastTrackFinder_Jet = [TrigFastTrackFinder_Jet()]
from TrigInDetConf.TrigInDetSequence import TrigInDetSequence
theFastTrackFinderxAOD = TrigInDetSequence("Bjet","bjet","FastxAOD").getSequence()
theBjet_tracks = TrigEFIDSequence("Bjet","bjet","DataPrep").getSequence()
theBjet_tracks += theTrigFastTrackFinder_Jet
theBjet_tracks += theFastTrackFinderxAOD
theBjet_tracks += TrigEFIDSequence("Bjet","bjet","InsideOutMerged").getSequence()
#include new tracking for vertexing here
# vertexing
from TrigT2HistoPrmVtx.TrigT2HistoPrmVtxAllTEConfig import EFHistoPrmVtxAllTE_Jet
from TrigT2HistoPrmVtx.TrigT2HistoPrmVtxComboConfig import EFHistoPrmVtxCombo_Jet
from InDetTrigVxSecondary.InDetTrigVxSecondary_LoadTools import TrigVxSecondary_EF
theVxSecondary = TrigVxSecondary_EF()
from TrigBjetHypo.TrigBjetFexConfig import getBjetFexInstance
theBjetFex = getBjetFexInstance("EF","2012","EFID")
if ('bperf' in chainParts['bTag'] or 'boffperf' in chainParts['bTag']):
from TrigBjetHypo.TrigBjetHypoConfig import getBjetHypoNoCutInstance
theBtagReq = getBjetHypoNoCutInstance("EF")
else:
from TrigBjetHypo.TrigBjetHypoConfig import getBjetHypoInstance
theBtagReq = getBjetHypoInstance("EF","2012", btagcut)
#-----------------------------------------------------------------------------------
# TE naming
#-----------------------------------------------------------------------------------
if ('EFID' in chainParts['bTracking']): tracking = 'EFID'
else: tracking = "IDTrig"
#etHypoTE= "HLT_bj"+btagthresh
#jetSplitTE = etHypoTE+"_jsplit"
#etaHypoTE = jetSplitTE+'_eta'+etaHypoCut
jetSplitTE = "HLT_jsplit"
etHypoTE= jetSplitTE+"_bj"+btagthresh
etaHypoTE = etHypoTE+'_eta'+etaHypoCut
jetTrackTE = etaHypoTE+"_"+tracking
superTE = "HLT_super"
superTrackingTE = superTE+tracking
prmVertexTE = superTrackingTE+"_prmVtx"
comboPrmVtxTE = prmVertexTE+"Combo"
secVtxTE = jetTrackTE+"__"+"superVtx"
lastTEout = "HLT_"+chainParts['chainPartName'] if numberOfSubChainDicts>1 else EFChainName
#if (btagmult == '1'):
# ef7 = 'HLT_b%s_%s_%s_VxSecondaryAndBTagHypo' % (btagthresh, btagcut, chainParts['chainPartName'].replace("_"+chainParts['bTracking'],""), )
#else:
# ef7 = 'HLT_%sb%s_%s_%s_VxSecondaryAndBTagHypo' % (btagmult, btagthresh, btagcut, chainParts['chainPartName'].replace("_"+chainParts['bTracking'],""))
#-----------------------------------------------------------------------------------
# sequence assembling
#-----------------------------------------------------------------------------------
theChainDef.addSequence(theJetSplit, inputTEsEF, jetSplitTE)
theChainDef.addSequence(theEtHypo, jetSplitTE, etHypoTE)
theChainDef.addSequence(theEtaHypo, etHypoTE, etaHypoTE)
theChainDef.addSequence(theBjet_tracks, etaHypoTE, jetTrackTE)
theChainDef.addSequence(theSuperRoi, inputTEsEF, superTE)
theChainDef.addSequence(theBjet_tracks, superTE, superTrackingTE) #to be replaced with new tracking
theChainDef.addSequence([EFHistoPrmVtxAllTE_Jet()], superTrackingTE, prmVertexTE)
theChainDef.addSequence([EFHistoPrmVtxCombo_Jet()], [superTrackingTE,prmVertexTE], comboPrmVtxTE)
#theChainDef.addSequence(theVxSecondary, [jetTrackTE,comboPrmVtxTE], secVtxTE)
theChainDef.addSequence(theVxSecondary, comboPrmVtxTE, secVtxTE)
theChainDef.addSequence([theBjetFex, theBtagReq], secVtxTE, lastTEout)
theChainDef.addSignature(theChainDef.signatureList[-1]['signature_counter']+1, [lastTEout]*int(btagmult))
return theChainDef