def __init__(self):
Resources.addSearchPath(
os.path.join(QtApplication.getInstallPrefix(), "share", "cura",
"resources"))
if not hasattr(sys, "frozen"):
Resources.addSearchPath(
os.path.join(os.path.abspath(os.path.dirname(__file__)), "..",
"resources"))
self._open_file_queue = [] # Files to open when plug-ins are loaded.
# Need to do this before ContainerRegistry tries to load the machines
SettingDefinition.addSupportedProperty("settable_per_mesh",
DefinitionPropertyType.Any,
default=True,
read_only=True)
SettingDefinition.addSupportedProperty("settable_per_extruder",
DefinitionPropertyType.Any,
default=True,
read_only=True)
# this setting can be changed for each group in one-at-a-time mode
SettingDefinition.addSupportedProperty("settable_per_meshgroup",
DefinitionPropertyType.Any,
default=True,
read_only=True)
SettingDefinition.addSupportedProperty("settable_globally",
DefinitionPropertyType.Any,
default=True,
read_only=True)
# From which stack the setting would inherit if not defined per object (handled in the engine)
# AND for settings which are not settable_per_mesh:
# which extruder is the only extruder this setting is obtained from
SettingDefinition.addSupportedProperty("limit_to_extruder",
DefinitionPropertyType.Function,
default="-1")
# For settings which are not settable_per_mesh and not settable_per_extruder:
# A function which determines the glabel/meshgroup value by looking at the values of the setting in all (used) extruders
SettingDefinition.addSupportedProperty("resolve",
DefinitionPropertyType.Function,
default=None)
SettingDefinition.addSettingType("extruder", None, str, Validator)
SettingFunction.registerOperator(
"extruderValues", cura.Settings.ExtruderManager.getExtruderValues)
SettingFunction.registerOperator(
"extruderValue", cura.Settings.ExtruderManager.getExtruderValue)
SettingFunction.registerOperator(
"resolveOrValue", cura.Settings.ExtruderManager.getResolveOrValue)
## Add the 4 types of profiles to storage.
Resources.addStorageType(self.ResourceTypes.QualityInstanceContainer,
"quality")
Resources.addStorageType(self.ResourceTypes.VariantInstanceContainer,
"variants")
Resources.addStorageType(self.ResourceTypes.MaterialInstanceContainer,
"materials")
Resources.addStorageType(self.ResourceTypes.UserInstanceContainer,
"user")
Resources.addStorageType(self.ResourceTypes.ExtruderStack, "extruders")
Resources.addStorageType(self.ResourceTypes.MachineStack,
"machine_instances")
ContainerRegistry.getInstance().addResourceType(
self.ResourceTypes.QualityInstanceContainer)
ContainerRegistry.getInstance().addResourceType(
self.ResourceTypes.VariantInstanceContainer)
ContainerRegistry.getInstance().addResourceType(
self.ResourceTypes.MaterialInstanceContainer)
ContainerRegistry.getInstance().addResourceType(
self.ResourceTypes.UserInstanceContainer)
ContainerRegistry.getInstance().addResourceType(
self.ResourceTypes.ExtruderStack)
ContainerRegistry.getInstance().addResourceType(
self.ResourceTypes.MachineStack)
## Initialise the version upgrade manager with Cura's storage paths.
import UM.VersionUpgradeManager #Needs to be here to prevent circular dependencies.
UM.VersionUpgradeManager.VersionUpgradeManager.getInstance(
).setCurrentVersions({
("quality", UM.Settings.InstanceContainer.Version):
(self.ResourceTypes.QualityInstanceContainer,
"application/x-uranium-instancecontainer"),
("machine_stack", UM.Settings.ContainerStack.Version):
(self.ResourceTypes.MachineStack,
"application/x-uranium-containerstack"),
("preferences", UM.Preferences.Version):
(Resources.Preferences, "application/x-uranium-preferences"),
("user", UM.Settings.InstanceContainer.Version):
(self.ResourceTypes.UserInstanceContainer,
"application/x-uranium-instancecontainer")
})
self._machine_action_manager = MachineActionManager.MachineActionManager(
)
self._machine_manager = None # This is initialized on demand.
self._setting_inheritance_manager = None
self._additional_components = {
} # Components to add to certain areas in the interface
super().__init__(name="cura",
version=CuraVersion,
buildtype=CuraBuildType)
self.setWindowIcon(
QIcon(Resources.getPath(Resources.Images, "cura-icon.png")))
self.setRequiredPlugins([
"CuraEngineBackend", "MeshView", "LayerView", "STLReader",
"SelectionTool", "CameraTool", "GCodeWriter",
"LocalFileOutputDevice"
])
self._physics = None
self._volume = None
self._output_devices = {}
self._print_information = None
self._previous_active_tool = None
self._platform_activity = False
self._scene_bounding_box = AxisAlignedBox.Null
self._job_name = None
self._center_after_select = False
self._camera_animation = None
self._cura_actions = None
self._started = False
self._message_box_callback = None
self._message_box_callback_arguments = []
self._i18n_catalog = i18nCatalog("cura")
self.getController().getScene().sceneChanged.connect(
self.updatePlatformActivity)
self.getController().toolOperationStopped.connect(
self._onToolOperationStopped)
Resources.addType(self.ResourceTypes.QmlFiles, "qml")
Resources.addType(self.ResourceTypes.Firmware, "firmware")
self.showSplashMessage(
self._i18n_catalog.i18nc("@info:progress", "Loading machines..."))
# Add empty variant, material and quality containers.
# Since they are empty, they should never be serialized and instead just programmatically created.
# We need them to simplify the switching between materials.
empty_container = ContainerRegistry.getInstance(
).getEmptyInstanceContainer()
empty_variant_container = copy.deepcopy(empty_container)
empty_variant_container._id = "empty_variant"
empty_variant_container.addMetaDataEntry("type", "variant")
ContainerRegistry.getInstance().addContainer(empty_variant_container)
empty_material_container = copy.deepcopy(empty_container)
empty_material_container._id = "empty_material"
empty_material_container.addMetaDataEntry("type", "material")
ContainerRegistry.getInstance().addContainer(empty_material_container)
empty_quality_container = copy.deepcopy(empty_container)
empty_quality_container._id = "empty_quality"
empty_quality_container.setName("Not supported")
empty_quality_container.addMetaDataEntry("quality_type", "normal")
empty_quality_container.addMetaDataEntry("type", "quality")
ContainerRegistry.getInstance().addContainer(empty_quality_container)
empty_quality_changes_container = copy.deepcopy(empty_container)
empty_quality_changes_container._id = "empty_quality_changes"
empty_quality_changes_container.addMetaDataEntry(
"type", "quality_changes")
ContainerRegistry.getInstance().addContainer(
empty_quality_changes_container)
# Set the filename to create if cura is writing in the config dir.
self._config_lock_filename = os.path.join(
Resources.getConfigStoragePath(), CONFIG_LOCK_FILENAME)
self.waitConfigLockFile()
ContainerRegistry.getInstance().load()
Preferences.getInstance().addPreference("cura/active_mode", "simple")
Preferences.getInstance().addPreference("cura/recent_files", "")
Preferences.getInstance().addPreference("cura/categories_expanded", "")
Preferences.getInstance().addPreference("cura/jobname_prefix", True)
Preferences.getInstance().addPreference("view/center_on_select", True)
Preferences.getInstance().addPreference("mesh/scale_to_fit", True)
Preferences.getInstance().addPreference("mesh/scale_tiny_meshes", True)
for key in [
"dialog_load_path", # dialog_save_path is in LocalFileOutputDevicePlugin
"dialog_profile_path",
"dialog_material_path"
]:
Preferences.getInstance().addPreference("local_file/%s" % key,
os.path.expanduser("~/"))
Preferences.getInstance().setDefault("local_file/last_used_type",
"text/x-gcode")
Preferences.getInstance().setDefault(
"general/visible_settings", """
machine_settings
resolution
layer_height
shell
wall_thickness
top_bottom_thickness
infill
infill_sparse_density
material
material_print_temperature
material_bed_temperature
material_diameter
material_flow
retraction_enable
speed
speed_print
speed_travel
acceleration_print
acceleration_travel
jerk_print
jerk_travel
travel
cooling
cool_fan_enabled
support
support_enable
support_extruder_nr
support_type
support_interface_density
platform_adhesion
adhesion_type
adhesion_extruder_nr
brim_width
raft_airgap
layer_0_z_overlap
raft_surface_layers
dual
prime_tower_enable
prime_tower_size
prime_tower_position_x
prime_tower_position_y
meshfix
blackmagic
print_sequence
infill_mesh
experimental
""".replace("\n", ";").replace(" ", ""))
JobQueue.getInstance().jobFinished.connect(self._onJobFinished)
self.applicationShuttingDown.connect(self.saveSettings)
self.engineCreatedSignal.connect(self._onEngineCreated)
self._recent_files = []
files = Preferences.getInstance().getValue("cura/recent_files").split(
";")
for f in files:
if not os.path.isfile(f):
continue
self._recent_files.append(QUrl.fromLocalFile(f))
def __init__(self):
Resources.addSearchPath(os.path.join(QtApplication.getInstallPrefix(), "share", "cura", "resources"))
if not hasattr(sys, "frozen"):
Resources.addSearchPath(os.path.join(os.path.abspath(os.path.dirname(__file__)), "..", "resources"))
self._open_file_queue = [] # Files to open when plug-ins are loaded.
# Need to do this before ContainerRegistry tries to load the machines
SettingDefinition.addSupportedProperty("settable_per_mesh", DefinitionPropertyType.Any, default = True, read_only = True)
SettingDefinition.addSupportedProperty("settable_per_extruder", DefinitionPropertyType.Any, default = True, read_only = True)
# this setting can be changed for each group in one-at-a-time mode
SettingDefinition.addSupportedProperty("settable_per_meshgroup", DefinitionPropertyType.Any, default = True, read_only = True)
SettingDefinition.addSupportedProperty("settable_globally", DefinitionPropertyType.Any, default = True, read_only = True)
# From which stack the setting would inherit if not defined per object (handled in the engine)
# AND for settings which are not settable_per_mesh:
# which extruder is the only extruder this setting is obtained from
SettingDefinition.addSupportedProperty("limit_to_extruder", DefinitionPropertyType.Function, default = "-1")
# For settings which are not settable_per_mesh and not settable_per_extruder:
# A function which determines the glabel/meshgroup value by looking at the values of the setting in all (used) extruders
SettingDefinition.addSupportedProperty("resolve", DefinitionPropertyType.Function, default = None, depends_on = "value")
SettingDefinition.addSettingType("extruder", None, str, Validator)
SettingFunction.registerOperator("extruderValues", cura.Settings.ExtruderManager.getExtruderValues)
SettingFunction.registerOperator("extruderValue", cura.Settings.ExtruderManager.getExtruderValue)
SettingFunction.registerOperator("resolveOrValue", cura.Settings.ExtruderManager.getResolveOrValue)
## Add the 4 types of profiles to storage.
Resources.addStorageType(self.ResourceTypes.QualityInstanceContainer, "quality")
Resources.addStorageType(self.ResourceTypes.VariantInstanceContainer, "variants")
Resources.addStorageType(self.ResourceTypes.MaterialInstanceContainer, "materials")
Resources.addStorageType(self.ResourceTypes.UserInstanceContainer, "user")
Resources.addStorageType(self.ResourceTypes.ExtruderStack, "extruders")
Resources.addStorageType(self.ResourceTypes.MachineStack, "machine_instances")
ContainerRegistry.getInstance().addResourceType(self.ResourceTypes.QualityInstanceContainer)
ContainerRegistry.getInstance().addResourceType(self.ResourceTypes.VariantInstanceContainer)
ContainerRegistry.getInstance().addResourceType(self.ResourceTypes.MaterialInstanceContainer)
ContainerRegistry.getInstance().addResourceType(self.ResourceTypes.UserInstanceContainer)
ContainerRegistry.getInstance().addResourceType(self.ResourceTypes.ExtruderStack)
ContainerRegistry.getInstance().addResourceType(self.ResourceTypes.MachineStack)
## Initialise the version upgrade manager with Cura's storage paths.
import UM.VersionUpgradeManager #Needs to be here to prevent circular dependencies.
UM.VersionUpgradeManager.VersionUpgradeManager.getInstance().setCurrentVersions(
{
("quality", UM.Settings.InstanceContainer.Version): (self.ResourceTypes.QualityInstanceContainer, "application/x-uranium-instancecontainer"),
("machine_stack", UM.Settings.ContainerStack.Version): (self.ResourceTypes.MachineStack, "application/x-uranium-containerstack"),
("preferences", UM.Preferences.Version): (Resources.Preferences, "application/x-uranium-preferences"),
("user", UM.Settings.InstanceContainer.Version): (self.ResourceTypes.UserInstanceContainer, "application/x-uranium-instancecontainer")
}
)
self._machine_action_manager = MachineActionManager.MachineActionManager()
self._machine_manager = None # This is initialized on demand.
self._setting_inheritance_manager = None
self._additional_components = {} # Components to add to certain areas in the interface
super().__init__(name = "cura", version = CuraVersion, buildtype = CuraBuildType)
self.setWindowIcon(QIcon(Resources.getPath(Resources.Images, "cura-icon.png")))
self.setRequiredPlugins([
"CuraEngineBackend",
"MeshView",
"LayerView",
"STLReader",
"SelectionTool",
"CameraTool",
"GCodeWriter",
"LocalFileOutputDevice"
])
self._physics = None
self._volume = None
self._output_devices = {}
self._print_information = None
self._previous_active_tool = None
self._platform_activity = False
self._scene_bounding_box = AxisAlignedBox.Null
self._job_name = None
self._center_after_select = False
self._camera_animation = None
self._cura_actions = None
self._started = False
self._message_box_callback = None
self._message_box_callback_arguments = []
self._i18n_catalog = i18nCatalog("cura")
self.getController().getScene().sceneChanged.connect(self.updatePlatformActivity)
self.getController().toolOperationStopped.connect(self._onToolOperationStopped)
Resources.addType(self.ResourceTypes.QmlFiles, "qml")
Resources.addType(self.ResourceTypes.Firmware, "firmware")
self.showSplashMessage(self._i18n_catalog.i18nc("@info:progress", "Loading machines..."))
# Add empty variant, material and quality containers.
# Since they are empty, they should never be serialized and instead just programmatically created.
# We need them to simplify the switching between materials.
empty_container = ContainerRegistry.getInstance().getEmptyInstanceContainer()
empty_variant_container = copy.deepcopy(empty_container)
empty_variant_container._id = "empty_variant"
empty_variant_container.addMetaDataEntry("type", "variant")
ContainerRegistry.getInstance().addContainer(empty_variant_container)
empty_material_container = copy.deepcopy(empty_container)
empty_material_container._id = "empty_material"
empty_material_container.addMetaDataEntry("type", "material")
ContainerRegistry.getInstance().addContainer(empty_material_container)
empty_quality_container = copy.deepcopy(empty_container)
empty_quality_container._id = "empty_quality"
empty_quality_container.setName("Not supported")
empty_quality_container.addMetaDataEntry("quality_type", "normal")
empty_quality_container.addMetaDataEntry("type", "quality")
ContainerRegistry.getInstance().addContainer(empty_quality_container)
empty_quality_changes_container = copy.deepcopy(empty_container)
empty_quality_changes_container._id = "empty_quality_changes"
empty_quality_changes_container.addMetaDataEntry("type", "quality_changes")
ContainerRegistry.getInstance().addContainer(empty_quality_changes_container)
# Set the filename to create if cura is writing in the config dir.
self._config_lock_filename = os.path.join(Resources.getConfigStoragePath(), CONFIG_LOCK_FILENAME)
self.waitConfigLockFile()
ContainerRegistry.getInstance().load()
Preferences.getInstance().addPreference("cura/active_mode", "simple")
Preferences.getInstance().addPreference("cura/recent_files", "")
Preferences.getInstance().addPreference("cura/categories_expanded", "")
Preferences.getInstance().addPreference("cura/jobname_prefix", True)
Preferences.getInstance().addPreference("view/center_on_select", True)
Preferences.getInstance().addPreference("mesh/scale_to_fit", True)
Preferences.getInstance().addPreference("mesh/scale_tiny_meshes", True)
for key in [
"dialog_load_path", # dialog_save_path is in LocalFileOutputDevicePlugin
"dialog_profile_path",
"dialog_material_path"]:
Preferences.getInstance().addPreference("local_file/%s" % key, os.path.expanduser("~/"))
Preferences.getInstance().setDefault("local_file/last_used_type", "text/x-gcode")
Preferences.getInstance().setDefault("general/visible_settings", """
machine_settings
resolution
layer_height
shell
wall_thickness
top_bottom_thickness
infill
infill_sparse_density
material
material_print_temperature
material_bed_temperature
material_diameter
material_flow
retraction_enable
speed
speed_print
speed_travel
acceleration_print
acceleration_travel
jerk_print
jerk_travel
travel
cooling
cool_fan_enabled
support
support_enable
support_extruder_nr
support_type
support_interface_density
platform_adhesion
adhesion_type
adhesion_extruder_nr
brim_width
raft_airgap
layer_0_z_overlap
raft_surface_layers
dual
prime_tower_enable
prime_tower_size
prime_tower_position_x
prime_tower_position_y
meshfix
blackmagic
print_sequence
infill_mesh
experimental
""".replace("\n", ";").replace(" ", ""))
JobQueue.getInstance().jobFinished.connect(self._onJobFinished)
self.applicationShuttingDown.connect(self.saveSettings)
self.engineCreatedSignal.connect(self._onEngineCreated)
self._recent_files = []
files = Preferences.getInstance().getValue("cura/recent_files").split(";")
for f in files:
if not os.path.isfile(f):
continue
self._recent_files.append(QUrl.fromLocalFile(f))
import os
import sys
import json
from UM.Settings.SettingDefinition import SettingDefinition, DefinitionPropertyType
from UM.Settings.Validator import Validator
from UM.Settings.DefinitionContainer import DefinitionContainer
if len(sys.argv) < 3:
print("Usage: query.py [file] [query]")
exit(1)
file_path = sys.argv[1]
# These are defined by Cura but we would still like to be able to query them.
SettingDefinition.addSupportedProperty("settable_per_mesh", DefinitionPropertyType.Any, default = True, read_only = True)
SettingDefinition.addSupportedProperty("settable_per_extruder", DefinitionPropertyType.Any, default = True, read_only = True)
SettingDefinition.addSupportedProperty("settable_per_meshgroup", DefinitionPropertyType.Any, default = True, read_only = True)
SettingDefinition.addSupportedProperty("settable_globally", DefinitionPropertyType.Any, default = True, read_only = True)
SettingDefinition.addSupportedProperty("limit_to_extruder", DefinitionPropertyType.Function, default = "-1")
SettingDefinition.addSupportedProperty("resolve", DefinitionPropertyType.Function, default = None)
SettingDefinition.addSettingType("extruder", None, str, Validator)
definition = DefinitionContainer(os.path.basename(file_path))
with open(file_path, encoding = "utf-8") as f:
definition.deserialize(f.read())
query = json.loads(sys.argv[2])
results = definition.findDefinitions(**query)
def __init__(self):
Resources.addSearchPath(os.path.join(QtApplication.getInstallPrefix(), "share", "cura", "resources"))
if not hasattr(sys, "frozen"):
Resources.addSearchPath(os.path.join(os.path.abspath(os.path.dirname(__file__)), "..", "resources"))
self._open_file_queue = [] # Files to open when plug-ins are loaded.
# Need to do this before ContainerRegistry tries to load the machines
SettingDefinition.addSupportedProperty("global_only", DefinitionPropertyType.Function, default = False)
SettingDefinition.addSettingType("extruder", int, str, UM.Settings.Validator)
super().__init__(name = "cura", version = CuraVersion, buildtype = CuraBuildType)
self.setWindowIcon(QIcon(Resources.getPath(Resources.Images, "cura-icon.png")))
self.setRequiredPlugins([
"CuraEngineBackend",
"MeshView",
"LayerView",
"STLReader",
"SelectionTool",
"CameraTool",
"GCodeWriter",
"LocalFileOutputDevice"
])
self._physics = None
self._volume = None
self._platform = None
self._output_devices = {}
self._print_information = None
self._i18n_catalog = None
self._previous_active_tool = None
self._platform_activity = False
self._scene_bounding_box = AxisAlignedBox()
self._job_name = None
self._center_after_select = False
self._camera_animation = None
self._cura_actions = None
self._started = False
self.getController().getScene().sceneChanged.connect(self.updatePlatformActivity)
self.getController().toolOperationStopped.connect(self._onToolOperationStopped)
Resources.addType(self.ResourceTypes.QmlFiles, "qml")
Resources.addType(self.ResourceTypes.Firmware, "firmware")
## Add the 4 types of profiles to storage.
Resources.addStorageType(self.ResourceTypes.QualityInstanceContainer, "quality")
Resources.addStorageType(self.ResourceTypes.VariantInstanceContainer, "variants")
Resources.addStorageType(self.ResourceTypes.MaterialInstanceContainer, "materials")
Resources.addStorageType(self.ResourceTypes.UserInstanceContainer, "user")
Resources.addStorageType(self.ResourceTypes.ExtruderStack, "extruders")
Resources.addStorageType(self.ResourceTypes.MachineStack, "machine_instances")
ContainerRegistry.getInstance().addResourceType(self.ResourceTypes.QualityInstanceContainer)
ContainerRegistry.getInstance().addResourceType(self.ResourceTypes.VariantInstanceContainer)
ContainerRegistry.getInstance().addResourceType(self.ResourceTypes.MaterialInstanceContainer)
ContainerRegistry.getInstance().addResourceType(self.ResourceTypes.UserInstanceContainer)
ContainerRegistry.getInstance().addResourceType(self.ResourceTypes.ExtruderStack)
ContainerRegistry.getInstance().addResourceType(self.ResourceTypes.MachineStack)
# Add empty variant, material and quality containers.
# Since they are empty, they should never be serialized and instead just programmatically created.
# We need them to simplify the switching between materials.
empty_container = ContainerRegistry.getInstance().getEmptyInstanceContainer()
empty_variant_container = copy.deepcopy(empty_container)
empty_variant_container._id = "empty_variant"
empty_variant_container.addMetaDataEntry("type", "variant")
ContainerRegistry.getInstance().addContainer(empty_variant_container)
empty_material_container = copy.deepcopy(empty_container)
empty_material_container._id = "empty_material"
empty_material_container.addMetaDataEntry("type", "material")
ContainerRegistry.getInstance().addContainer(empty_material_container)
empty_quality_container = copy.deepcopy(empty_container)
empty_quality_container._id = "empty_quality"
empty_quality_container.addMetaDataEntry("type", "quality")
ContainerRegistry.getInstance().addContainer(empty_quality_container)
ContainerRegistry.getInstance().load()
Preferences.getInstance().addPreference("cura/active_mode", "simple")
Preferences.getInstance().addPreference("cura/recent_files", "")
Preferences.getInstance().addPreference("cura/categories_expanded", "")
Preferences.getInstance().addPreference("cura/jobname_prefix", True)
Preferences.getInstance().addPreference("view/center_on_select", True)
Preferences.getInstance().addPreference("mesh/scale_to_fit", True)
Preferences.getInstance().addPreference("mesh/scale_tiny_meshes", True)
Preferences.getInstance().setDefault("local_file/last_used_type", "text/x-gcode")
Preferences.getInstance().setDefault("general/visible_settings", """
machine_settings
resolution
layer_height
shell
wall_thickness
top_bottom_thickness
infill
infill_sparse_density
material
material_print_temperature
material_bed_temperature
material_diameter
material_flow
retraction_enable
speed
speed_print
speed_travel
travel
cooling
cool_fan_enabled
support
support_enable
support_type
support_roof_density
platform_adhesion
adhesion_type
brim_width
raft_airgap
layer_0_z_overlap
raft_surface_layers
meshfix
blackmagic
print_sequence
dual
experimental
""".replace("\n", ";").replace(" ", ""))
JobQueue.getInstance().jobFinished.connect(self._onJobFinished)
self.applicationShuttingDown.connect(self.saveSettings)
self._recent_files = []
files = Preferences.getInstance().getValue("cura/recent_files").split(";")
for f in files:
if not os.path.isfile(f):
continue
self._recent_files.append(QUrl.fromLocalFile(f))
def __init__(self):
Resources.addSearchPath(
os.path.join(QtApplication.getInstallPrefix(), "share", "cura",
"resources"))
if not hasattr(sys, "frozen"):
Resources.addSearchPath(
os.path.join(os.path.abspath(os.path.dirname(__file__)), "..",
"resources"))
self._open_file_queue = [] # Files to open when plug-ins are loaded.
# Need to do this before ContainerRegistry tries to load the machines
SettingDefinition.addSupportedProperty("global_only",
DefinitionPropertyType.Function,
default=False)
SettingDefinition.addSettingType("extruder", int, str,
UM.Settings.Validator)
super().__init__(name="cura",
version=CuraVersion,
buildtype=CuraBuildType)
self.setWindowIcon(
QIcon(Resources.getPath(Resources.Images, "cura-icon.png")))
self.setRequiredPlugins([
"CuraEngineBackend", "MeshView", "LayerView", "STLReader",
"SelectionTool", "CameraTool", "GCodeWriter",
"LocalFileOutputDevice"
])
self._physics = None
self._volume = None
self._platform = None
self._output_devices = {}
self._print_information = None
self._i18n_catalog = None
self._previous_active_tool = None
self._platform_activity = False
self._scene_bounding_box = AxisAlignedBox()
self._job_name = None
self._center_after_select = False
self._camera_animation = None
self._cura_actions = None
self._started = False
self.getController().getScene().sceneChanged.connect(
self.updatePlatformActivity)
self.getController().toolOperationStopped.connect(
self._onToolOperationStopped)
Resources.addType(self.ResourceTypes.QmlFiles, "qml")
Resources.addType(self.ResourceTypes.Firmware, "firmware")
## Add the 4 types of profiles to storage.
Resources.addStorageType(self.ResourceTypes.QualityInstanceContainer,
"quality")
Resources.addStorageType(self.ResourceTypes.VariantInstanceContainer,
"variants")
Resources.addStorageType(self.ResourceTypes.MaterialInstanceContainer,
"materials")
Resources.addStorageType(self.ResourceTypes.UserInstanceContainer,
"user")
Resources.addStorageType(self.ResourceTypes.ExtruderStack, "extruders")
Resources.addStorageType(self.ResourceTypes.MachineStack,
"machine_instances")
ContainerRegistry.getInstance().addResourceType(
self.ResourceTypes.QualityInstanceContainer)
ContainerRegistry.getInstance().addResourceType(
self.ResourceTypes.VariantInstanceContainer)
ContainerRegistry.getInstance().addResourceType(
self.ResourceTypes.MaterialInstanceContainer)
ContainerRegistry.getInstance().addResourceType(
self.ResourceTypes.UserInstanceContainer)
ContainerRegistry.getInstance().addResourceType(
self.ResourceTypes.ExtruderStack)
ContainerRegistry.getInstance().addResourceType(
self.ResourceTypes.MachineStack)
# Add empty variant, material and quality containers.
# Since they are empty, they should never be serialized and instead just programmatically created.
# We need them to simplify the switching between materials.
empty_container = ContainerRegistry.getInstance(
).getEmptyInstanceContainer()
empty_variant_container = copy.deepcopy(empty_container)
empty_variant_container._id = "empty_variant"
empty_variant_container.addMetaDataEntry("type", "variant")
ContainerRegistry.getInstance().addContainer(empty_variant_container)
empty_material_container = copy.deepcopy(empty_container)
empty_material_container._id = "empty_material"
empty_material_container.addMetaDataEntry("type", "material")
ContainerRegistry.getInstance().addContainer(empty_material_container)
empty_quality_container = copy.deepcopy(empty_container)
empty_quality_container._id = "empty_quality"
empty_quality_container.addMetaDataEntry("type", "quality")
ContainerRegistry.getInstance().addContainer(empty_quality_container)
ContainerRegistry.getInstance().load()
Preferences.getInstance().addPreference("cura/active_mode", "simple")
Preferences.getInstance().addPreference("cura/recent_files", "")
Preferences.getInstance().addPreference("cura/categories_expanded", "")
Preferences.getInstance().addPreference("cura/jobname_prefix", True)
Preferences.getInstance().addPreference("view/center_on_select", True)
Preferences.getInstance().addPreference("mesh/scale_to_fit", True)
Preferences.getInstance().addPreference("mesh/scale_tiny_meshes", True)
Preferences.getInstance().setDefault("local_file/last_used_type",
"text/x-gcode")
Preferences.getInstance().setDefault(
"general/visible_settings", """
machine_settings
resolution
layer_height
shell
wall_thickness
top_bottom_thickness
infill
infill_sparse_density
material
material_print_temperature
material_bed_temperature
material_diameter
material_flow
retraction_enable
speed
speed_print
speed_travel
travel
cooling
cool_fan_enabled
support
support_enable
support_type
support_roof_density
platform_adhesion
adhesion_type
brim_width
raft_airgap
layer_0_z_overlap
raft_surface_layers
meshfix
blackmagic
print_sequence
dual
experimental
""".replace("\n", ";").replace(" ", ""))
JobQueue.getInstance().jobFinished.connect(self._onJobFinished)
self.applicationShuttingDown.connect(self.saveSettings)
self._recent_files = []
files = Preferences.getInstance().getValue("cura/recent_files").split(
";")
for f in files:
if not os.path.isfile(f):
continue
self._recent_files.append(QUrl.fromLocalFile(f))
import sys
import json
from UM.Settings.SettingDefinition import SettingDefinition, DefinitionPropertyType
from UM.Settings.Validator import Validator
from UM.Settings.DefinitionContainer import DefinitionContainer
if len(sys.argv) < 3:
print("Usage: query.py [file] [query]")
exit(1)
file_path = sys.argv[1]
# These are defined by Cura but we would still like to be able to query them.
SettingDefinition.addSupportedProperty("settable_per_mesh",
DefinitionPropertyType.Any,
default=True,
read_only=True)
SettingDefinition.addSupportedProperty("settable_per_extruder",
DefinitionPropertyType.Any,
default=True,
read_only=True)
SettingDefinition.addSupportedProperty("settable_per_meshgroup",
DefinitionPropertyType.Any,
default=True,
read_only=True)
SettingDefinition.addSupportedProperty("settable_globally",
DefinitionPropertyType.Any,
default=True,
read_only=True)
SettingDefinition.addSupportedProperty("limit_to_extruder",
DefinitionPropertyType.Function,
