def newProject(self):
if self.projectFile is not None:
QMessageBox.information(self, '提示', '请先关闭当前工程')
return
self.projectFile, ext = QFileDialog.getSaveFileName(
self, "新建工程文件", '', "Project File (*.pro)")
if len(self.projectFile) > 0:
#创建数据库
self.database = DataBase(self.projectFile)
self.database.setSQLFile(self.programPath + '/config/database.sql')
self.database.createDB()
#连接数据库
self.database.connectDB()
self.title = os.path.split(self.projectFile)[1] #获取文件名
self.title = self.windowTitle() + '——' + self.title
self.setWindowTitle(self.title)
else:
self.projectFile = None
def run(self):
#连接数据库
database=DataBase(self.dbFile)
database.connectDB()
self.processStep.emit(1)
#统计查询结果
ids,gPoints,grs=database.getCollectCircles()
self.processStep.emit(2)
#更新存入结果
database.updateCollectCircles(ids,gPoints,grs)
database.closeDB()
self.processStep.emit(3)
del database
def __lookReport(self):
if not self.canlook:
return
database=DataBase(self.dbFile)
database.connectDB()
names,errors=database.getReportWithoutCoords()
database.closeDB()
table=ReportTable(self)
table.setContents(names,errors)
table.exec_()
def openProject(self):
if self.projectFile is not None:
QMessageBox.information(self, '提示', '请先关闭当前工程')
return
self.projectFile, ext = QFileDialog.getOpenFileName(
self, "文件选择", './', "pro Files (*.pro)")
if len(self.projectFile) > 0:
#连接数据库
self.database = DataBase(self.projectFile)
self.database.connectDB()
#查询图像
ids, files, states = self.database.getImages()
self.centerUi.fileViewer.insertFiles(ids, files, states) #显示文件名列表
self.geoCorrectMode = self.database.getCorrectMode()
self.title = os.path.split(self.projectFile)[1] #获取文件名
self.title = self.windowTitle() + '——' + self.title
self.setWindowTitle(self.title)
else:
self.projectFile = None
class MainProgram(MainUI):
def __init__(self, parent=None):
super(MainProgram, self).__init__()
self.__initVariable()
def __initVariable(self):
self.projectFile = None
self.database = None
self.cpManager = None
self.cirManager = None
self.title = '' #窗口标题
#当前模式
#-1 尚未打开工程
#0 一般模式
#1 选择控制点模式
#2 选择基桩模式
self.currentMode = 0
self.tmpObject = None
self.geoCorrectMode = 0
#检查当前状态
def __checkMode(self, mode):
if self.database is None:
return False
if self.currentMode != mode:
return False
return True
#新建工程
def newProject(self):
if self.projectFile is not None:
QMessageBox.information(self, '提示', '请先关闭当前工程')
return
self.projectFile, ext = QFileDialog.getSaveFileName(
self, "新建工程文件", '', "Project File (*.pro)")
if len(self.projectFile) > 0:
#创建数据库
self.database = DataBase(self.projectFile)
self.database.setSQLFile(self.programPath + '/config/database.sql')
self.database.createDB()
#连接数据库
self.database.connectDB()
self.title = os.path.split(self.projectFile)[1] #获取文件名
self.title = self.windowTitle() + '——' + self.title
self.setWindowTitle(self.title)
else:
self.projectFile = None
#导入图像
def importImages(self):
if not self.__checkMode(0):
return
files, ext = QFileDialog.getOpenFileNames(self, "导入图像", '',
"Image Files (*.jpg *tif)")
if len(files) > 0:
self.database.insertImage(files)
ids, files, states = self.database.getImages()
self.centerUi.fileViewer.insertFiles(ids, files, states)
#打开工程
def openProject(self):
if self.projectFile is not None:
QMessageBox.information(self, '提示', '请先关闭当前工程')
return
self.projectFile, ext = QFileDialog.getOpenFileName(
self, "文件选择", './', "pro Files (*.pro)")
if len(self.projectFile) > 0:
#连接数据库
self.database = DataBase(self.projectFile)
self.database.connectDB()
#查询图像
ids, files, states = self.database.getImages()
self.centerUi.fileViewer.insertFiles(ids, files, states) #显示文件名列表
self.geoCorrectMode = self.database.getCorrectMode()
self.title = os.path.split(self.projectFile)[1] #获取文件名
self.title = self.windowTitle() + '——' + self.title
self.setWindowTitle(self.title)
else:
self.projectFile = None
# 设置校正模式
def setParmsMode(self):
if not self.__checkMode(0):
return
dialog = GeoCorrectDialog(self.geoCorrectMode, self)
lastMode = self.geoCorrectMode
self.geoCorrectMode = dialog.getMode()
if lastMode != self.geoCorrectMode:
self.database.setCorrectMode(self.geoCorrectMode)
# 更新数据库所有数据
self.database.resetImageState(self.geoCorrectMode)
self.centerUi.fileViewer.resetState()
#导入控制点
def importControlPoint(self):
if not self.__checkMode(0):
return
file, ext = QFileDialog.getOpenFileName(
self, "文件选择", './', "Data Files (*.xlsx *.xls *.txt)")
if len(file) > 0:
#导入
pointsFile = ImportPoints(file)
names, points = pointsFile.getPoints()
#保持
self.database.insertCPoints(names, points)
num = len(names)
if num > 0:
QMessageBox.information(self, '成功', '共导入' + str(num) + '个点')
#查看控制点
def lookControlPoint(self):
if not self.__checkMode(0):
return
_, names, points = self.database.getCPoints()
table = CPointsTable(self)
table.setContents(names, points)
table.exec_()
#导入CAD
def importCAD(self):
if not self.__checkMode(0):
return
ImportCADDiaolg(self.database, self).exec_()
#查看导入的CAD数据
def lookCircle(self):
if not self.__checkMode(0):
return
look = LookCircleDialog(self)
look.exec_()
if look.flag == 1:
ids, names, locations, radius = self.database.getCircles()
table = CircleTable(self)
table.setDataBase(self.database)
table.setContents(ids, names, locations, radius)
table.exec_()
elif look.flag == 2:
_, names, locations, radius = self.database.getCircles()
self.centerUi.showImportCircle(names, locations, radius)
#选点模式
def selectCPoints(self):
if not self.__checkMode(0):
return
self.currentMode = 1
###
self.centerUi.setMode(1)
self.centerUi.fileViewer.selectImage.connect(
self.__selectCPointsManager)
title = self.title + '（选点模式）'
self.setWindowTitle(title)
def __selectCPointsManager(self, image_idx, file):
if not os.path.exists(file):
QMessageBox.information(self, '失败', '图像不存在，请检查路径')
return
name = os.path.basename(file)
title = self.title + '——' + name + '（选点模式）'
self.setWindowTitle(title)
self.centerUi.addPointListView()
self.cpManager = PointsManager(mode=self.geoCorrectMode)
self.cpManager.setWidget(self.centerUi.imageViewer,
self.centerUi.pLister,
self.centerUi.fileViewer)
self.cpManager.setDataBase(self.database)
self.cpManager.setCurrentImageID(image_idx)
#退出选点模式
def exitCPoints(self):
if not self.__checkMode(1):
return
self.currentMode = 0
# if self.cpManager is None:
# return
self.centerUi.setMode(0)
self.centerUi.deletePointListView()
self.cpManager = None
self.setWindowTitle(self.title)
self.centerUi.fileViewer.selectImage.disconnect(
self.__selectCPointsManager)
#计算每张图像上的圆
def estimateCircles(self):
if not self.__checkMode(0):
return
estDialog = EstCirclesDialog(self.geoCorrectMode, self)
estDialog.setDBFile(self.projectFile)
estDialog.exec_()
#选圆模式
def selectCircles(self):
if not self.__checkMode(0):
return
self.currentMode = 2
self.centerUi.setMode(2)
self.centerUi.fileViewer.selectImage.connect(
self.__selectCirclesManager)
title = self.title + '（标注基桩模式）'
self.setWindowTitle(title)
def __selectCirclesManager(self, image_idx, file):
if not os.path.exists(file):
QMessageBox.information(self, '失败', '图像不存在，请检查路径')
return
name = os.path.basename(file)
title = self.title + '——' + name + '（标注基桩模式）'
programFile = self.programPath + '/modules/segment.exe'
self.setWindowTitle(title)
self.centerUi.addCircleListView()
self.cirManager = CirclesManager(self.geoCorrectMode)
self.cirManager.setsegmentProgram(programFile)
self.cirManager.setWidget(self.centerUi.imageViewer,
self.centerUi.cLister,
self.centerUi.fileViewer)
self.cirManager.setDataBase(self.database)
self.cirManager.setCurrentImageID(image_idx, self)
#退出选圆模式
def exitCircles(self):
if not self.__checkMode(2):
return
self.currentMode = 0
# if self.cirManager is None:
# return
self.centerUi.setMode(0)
self.centerUi.deleteCircleListView()
self.cirManager = None
self.setWindowTitle(self.title)
self.centerUi.fileViewer.selectImage.disconnect(
self.__selectCirclesManager)
#统计结果
def collect(self):
if not self.__checkMode(0):
return
collDialog = CollCirclesDialog(self)
collDialog.setDBFile(self.projectFile)
collDialog.exec_()
#查看报告
def lookReport(self):
if not self.__checkMode(0):
return
names, errors = self.database.getReportWithoutCoords()
table = ReportTable(self)
table.setContents(names, errors)
table.exec_()
#导出报告
def exportReport(self):
if not self.__checkMode(0):
return
names, points, point_r, gPoints, gPoints_r, errors = self.database.getReport(
)
file, ext = QFileDialog.getSaveFileName(self, "文件保存", './',
"Excel Files (*.xls)")
if len(file) > 0:
report = Report(file)
report.setContents(names, points, point_r, gPoints, gPoints_r,
errors)
QMessageBox.information(self, '成功', '导出成功！')
#导出图像
def exportComposite(self):
if not self.__checkMode(0):
return
programFile = self.programPath + '/modules/composite.exe'
compDialog = CompositeDialog(self)
compDialog.setParms(programFile, self.projectFile)
compDialog.exec_()
#查看拼接后的图像（与圆叠加显示）
def lookComposite(self):
if not self.__checkMode(0):
return
file, ext = QFileDialog.getOpenFileName(self, "文件选择", '',
"Image (*.tif)")
if len(file) > 0:
self.centerUi.showImportComposite()
self.tmpObject = LookComposite(self)
self.tmpObject.setImageViewer(self.centerUi.imageViewer)
self.tmpObject.setFile(file, self.projectFile)
#相机表达参数
def caliParmsOpen(self):
command = self.programPath + '/modules/calib.exe'
# os.system(command)
subprocess.Popen(command, shell=False, close_fds=True)
#图片畸变矫正
def undistortOpen(self):
command = self.programPath + '/modules/undist.exe'
# os.system(command)
subprocess.Popen(command, shell=False, close_fds=True)
# def closeEvent(self,event):
# if self.database is not None:
# self.database.closeDB()
#
def __del__(self):
if self.database is not None:
self.database.closeDB()
class CirclesAssign(QObject):
processImage=pyqtSignal(int)
def __init__(self,dbFile, geoCorrectMode):
super(CirclesAssign,self).__init__()
self.geoCorrectMode=geoCorrectMode
self.database=DataBase(dbFile)
self.database.connectDB()
self.__initVariable()
def __del__(self):
self.database.closeDB()
def __initVariable(self):
self.width=None
self.height=None
# self.radius=None
#下面的，长度相同
self.ids=[]#图像id号
self.parms=[]#图像转换参数
self.limits=[]#图像范围
def run(self):
if not self.updateLimit():
return False
self.__getCircles()
return True
#更新图像的四个点坐标范围
def updateLimit(self):
if not self.__getImage():
return False
self.__convertLimits()
return True
def __getImage(self):
self.ids,images,self.parms=self.database.getImageTransformParmsByState()
num=len(self.ids)
#发送图像个数
self.processImage.emit(num)
if num==0:
return False
#获取图像尺寸
img=Image.open(images[0])
self.width,self.height=img.size
del img
return True
#计算每张图的地理坐标范围，并保存至数据库
def __convertLimits(self):
cf=CoordsTransform()
pixels=[[0,0],[0,self.height-1],[self.width-1,self.height-1],[self.width-1,0]]
#计算
for idx,parm in zip(self.ids,self.parms):
cf.setParms(parm)
limit=cf.pixelsToGrounds(pixels)
self.limits.append(limit)
#保存
self.database.updateImageLimit(self.ids,self.limits)
#读取圆信息并开始处理
def __getCircles(self):
idCs,_,locations,radius=self.database.getCircles()
if len(idCs)==0:
self.processImage.emit(len(self.limits)-1)
return
# self.radius=radius[0]
idCs=np.matrix(idCs)
locations=np.matrix(locations)
####
self.__filter(idCs,locations,radius)
#根据地理坐标范围过滤，并求转换坐标
def __filter(self,idCs,points,radius):
cf=CoordsTransform()
#对每张图
for i,limit in enumerate(self.limits):
#过滤的结果
index=self.__pointsInRect(limit,points)
#没有圆落在该图像内
if index[0].size==0:
self.processImage.emit(i)
continue
#位于某图像上的圆的id
idCs_Image=idCs.T[index].tolist()[0]
#位于某图像上的圆的地理坐标
grounds_Image=points[index[0]].tolist()
#计算对应的像素坐标
cf.setParms(self.parms[i])
#计算像素半径
radiusPixel=cf.lengthGroundsToPixels(radius[i])
if self.geoCorrectMode==0:
pixels = cf.groundsToPixels(grounds_Image)
else:
if self.geoCorrectMode == 1:
coordsTool = GeoCorrect1Poly()
polyParms = self.database.getGeo1PloyParms(self.ids[i])
elif self.geoCorrectMode == 2:
coordsTool = GeoCorrect2Poly()
polyParms=self.database.getGeo2PloyParms(self.ids[i])
coordsTool.setParms(polyParms)
pixels=coordsTool.groundsToPixels(grounds_Image)
self.__saveCirclesInImageToDB(self.ids[i],idCs_Image,pixels,radiusPixel)
#发送当前正在处理的图像序号
self.processImage.emit(i)
#保存至数据库
def __saveCirclesInImageToDB(self,image_id,circle_ids,pixels,radius):
self.database.insertSelectCircle(image_id,circle_ids,pixels,radius)
#圆是否在矩形中，返回在矩形中的序号（行号）
def __pointsInRect(self,limit,points):
num=points.shape[0]
limit=np.matrix(limit)
#矩形框逆时针四个点
p1=limit[0]
p2=limit[1]
p3=limit[2]
p4=limit[3]
#向量
p2p0=points-p2
p1p2=p2-p1
p3p0=points-p3
p3p4=p4-p3
p1p0=points-p1
p1p4=p4-p1
p2p0=points-p2
p2p3=p3-p2
#(x1,y1)x(x2,y2)=x1*y2-x2*y1
#p2p0 x p1p2
s1=p2p0[:,0]*p1p2[0,1]-p1p2[0,0]*p2p0[:,1]
#p3p0 X p3p4
s2=p3p0[:,0]*p3p4[0,1]-p3p4[0,0]*p3p0[:,1]
#p1p0 x p1p4
s3=p1p0[:,0]*p1p4[0,1]-p1p4[0,0]*p1p0[:,1]
#p2p0 x p2p3
s4=p2p0[:,0]*p2p3[0,1]-p2p3[0,0]*p2p0[:,1]
d1=np.multiply(s1,s2)>0
d2=np.multiply(s3,s4)<0
flag=d1 & d2
return np.where(flag==True)
def __init__(self,dbFile, geoCorrectMode):
super(CirclesAssign,self).__init__()
self.geoCorrectMode=geoCorrectMode
self.database=DataBase(dbFile)
self.database.connectDB()
self.__initVariable()