def run(self, context):
"""
Runs the test step
:type context: TestStepContext
:param context: test case context
"""
BtBase.run(self, context)
multimedia_path = self._device.multimedia_path
address = self._pars.bdaddr
# Split the file names and strip each of them
file_list = split_and_strip(self._pars.files,
Constants.FILE_NAME_SEPARATOR)
fullpath_filenames, file_size = self._process_files(
multimedia_path, file_list, False)
self._api.bt_opp_clean_notification_list()
self._save_file_size_if_needed(file_size, context)
self._save_file_chksum_if_needed(multimedia_path, file_list, context)
# Request for the First transfer to be registered
self._api.bt_opp_send_file(fullpath_filenames, address)
def run(self, context):
"""
Runs the test step
:type context: TestStepContext
:param context: test case context
"""
BtBase.run(self, context)
cmd = "sdptool browse " + self._pars.name
output = self._device.run_cmd(cmd, 20)
control_string = "Browsing " + self._pars.name
if self._pars.check_string and self._pars.check_string != "":
if "'" in self._pars.check_string:
if self._pars.check_string.replace("'", "\"") in output[1]:
self.ts_verdict_msg = "VERDICT: The searched service is correctly found by the sdptool: {0}".format(self._pars.check_string)
self._logger.debug(self.ts_verdict_msg)
elif "Version" in self._pars.check_string:
search1, search2 = self._pars.check_string.split("Version")
if re.search(search1 + ".+" + search2, output[1]):
self.ts_verdict_msg = "VERDICT: The searched service is correctly found by the sdptool: {0}".format(self._pars.check_string)
self._logger.debug(self.ts_verdict_msg)
else:
self.ts_verdict_msg = "VERDICT: The sdptool did not find the given service listed for this device"
raise DeviceException(DeviceException.OPERATION_FAILED, self.ts_verdict_msg)
elif (not self._pars.check_string or self._pars.check_string == "") and control_string in output[1]:
self.ts_verdict_msg = "VERDICT: The service list is correctly found by the sdptool: {0}".format(output[1])
self._logger.debug(self.ts_verdict_msg)
else:
self.ts_verdict_msg = "VERDICT: The sdptool did not find any services listed for this device"
raise DeviceException(DeviceException.OPERATION_FAILED, self.ts_verdict_msg)
self._logger.debug(self.ts_verdict_msg)
def run(self, context):
"""
Runs the test step
:type context: TestStepContext
:param context: test case context
"""
BtBase.run(self, context)
power = str(self._pars.power).lower()
# # Get the power sequence (it might just be one single operation)
power_sequence = split_and_strip(power, self.STR_SEPARATOR)
for current in power_sequence:
assert current in [TestConst.STR_ON, TestConst.STR_OFF], \
"passed value (%s) is invalid at this stage" % current
self._logger.info("Power %s the Bluetooth adapters" % current)
self._api.set_bt_power(current)
state_bt = self._api.get_bt_power_status()
if (current == TestConst.STR_ON) and (state_bt != str(
BT_STATE.STATE_ON)):
self._raise_device_exception("set BT ON failure")
if (current == TestConst.STR_OFF) and (state_bt != str(
BT_STATE.STATE_OFF)):
self._raise_device_exception("set BT OFF failure")
def run(self, context):
"""
Runs the test step
@type context: TestStepContext
@param context: test case context
"""
BtBase.run(self, context)
assert self._pars.must_find in [True, False], \
"MUST_FIND (%s) value should have been checked by the framework" % self._pars.must_find
try:
device_found = self._api.bt_find_device(self._pars.device_to_find)
if not device_found and self._pars.must_find is True:
msg = "Device %s not found" % self._pars.device_to_find
self._logger.error(msg)
raise DeviceException(DeviceException.OPERATION_FAILED, msg)
elif device_found and self._pars.must_find is False:
msg = "Device %s found" % self._pars.device_to_find
self._logger.error(msg)
raise DeviceException(DeviceException.OPERATION_FAILED, msg)
except DeviceException as acs_exception:
if self._pars.must_find is None:
self._logger.debug("Error/Timeout on scan devices")
else:
raise
def run(self, context):
"""
Runs the test step
:type context: TestStepContext
:param context: test case context
"""
BtBase.run(self, context)
bd_address = str(self._pars.bdaddr)
class_to_browse = str(self._pars.class_to_browse)
# Because optional
if class_to_browse is None:
class_to_browse = ""
self._logger.info("Browse service class '{0}' on device {1}".format(
class_to_browse, bd_address))
status, bt_dev = self._api.bt_service_browsing(
bd_address=bd_address, class_to_browse=class_to_browse)
if bt_dev is not None and isinstance(bt_dev, BluetoothDevice):
context.set_nested_info([self._pars.save_as, "ADDRESS"],
bt_dev.address)
context.set_nested_info([self._pars.save_as, "NAME"], bt_dev.name)
context.set_nested_info([self._pars.save_as, "BONDED"],
bt_dev.bonded)
context.set_nested_info([self._pars.save_as, "INTERFACE"],
bt_dev.interface)
# format list a test step parameter style
uuids_list_step_style = TestStepParameters.LIST_KEYWORD.join(
bt_dev.uuids)
context.set_nested_info([self._pars.save_as, "UUID"],
uuids_list_step_style)
def run(self, context):
"""
Runs the test step
:type context: TestStepContext
:param context: test case context
"""
BtBase.run(self, context)
power = str(self._pars.power).lower()
# # Get the power sequence (it might just be one single operation)
power_sequence = split_and_strip(power, self.STR_SEPARATOR)
for current in power_sequence:
assert current in [TestConst.STR_ON, TestConst.STR_OFF], \
"passed value (%s) is invalid at this stage" % current
self._logger.info("Power %s the Bluetooth tethering" % current)
self._api.set_bt_tethering_power(current)
if current == TestConst.STR_ON and self._api.get_bt_tethering_power(
) != True:
self._raise_device_exception("set BT tethering ON failure")
if current == TestConst.STR_OFF and self._api.get_bt_tethering_power(
) != False:
self._raise_device_exception("set BT tethering OFF failure")
def run(self, context):
"""
Runs the test step
:type context: TestStepContext
:param context: test case context
"""
BtBase.run(self, context)
self._api.bt_opp_clean_notification_list()
self._remove_files_if_needed()
def run(self, context):
"""
Runs the test step
:type context: TestStepContext
:param context: test case context
"""
BtBase.run(self, context)
# # Get the BT address and post it in the context
address = self._api.get_bt_adapter_address()
context.set_info(self._pars.save_as, address)
def run(self, context):
"""
Runs the test step
:type context: TestStepContext
:param context: test case context
"""
BtBase.run(self, context)
if self._bt_ui_actions.bt_refresh_scan_ui():
self._bt_ui_actions.bt_wait_for_scan_end()
self._bt_ui_actions.bt_look_for_device_in_list(
self._pars.device_name_to_find)
def run(self, context):
"""
Runs the test step
:type context: TestStepContext
:param context: test case context
"""
BtBase.run(self, context)
profile = self._pars.profile
if profile == self._PBAP_PROFILE:
self._bt_ui_actions.bt_pbap_allow_contact_sharing(
self._pars.fail_if_already, self._pars.must_exist)
def run(self, context):
"""
Runs the test step
@type context: TestStepContext
@param context: test case context
"""
BtBase.run(self, context)
self._bt_obj = BluetoothConnectivity(self._device, 15)
self._phone2 = DeviceManager().get_device(
BtFindDeviceBypass.STR_PHONE2)
self._bt_api2 = self._phone2.get_uecmd(
BtFindDeviceBypass.STR_LOCAL_CONN)
assert self._pars.must_find in [True, False], \
"MUST_FIND (%s) value should have been checked by the framework" % self._pars.must_find
self._bt_obj.search_for_device_until_found(self._api, self._bt_api2,
self._pars.device_to_find,
self._pars.must_find)
def run(self, context):
"""
Runs the test step
:type context: TestStepContext
:param context: test case context
"""
BtBase.run(self, context)
if self._pars.timeout is None:
self._pars.timeout = 0
# Start Opp server
if self._pars.status == "enable":
self._api.bt_start_opp_server()
if self._pars.status == "disable":
self._api.bt_stop_opp_server()
def run(self, context):
"""
Runs the test step
:type context: TestStepContext
:param context: test case context
"""
BtBase.run(self, context)
self._bt_ui_actions._bt_open_pairing_menu(self._pars.device_name)
if self._pars.enable is None or self._pars.enable is True:
self._enable()
else:
self._disable()
self._bt_ui_actions._bt_dismiss_pairing_menu(self._pars.enable)
def run(self, context):
"""
Runs the test step
:type context: TestStepContext
:param context: test case context
"""
BtBase.run(self, context)
if self._pars.mode is None:
self._pars.mode = Constants.DISCOVERABLE_BOTH
if self._pars.timeout is None:
self._pars.timeout = 0
# # Does it make sense to have mode default = both?
self._api.set_bt_discoverable(self._pars.mode, int(self._pars.timeout))
def run(self, context):
"""
Runs the test step
:type context: TestStepContext
:param context: test case context
"""
BtBase.run(self, context)
if self._pars.timeout is not None:
timeout = self._pars.timeout
else:
timeout = self.DEFAULT_TIMEOUT
# Split the file names and strip each of them
file_list = split_and_strip(self._pars.files,
Constants.FILE_NAME_SEPARATOR)
self._api.bt_opp_cancel_send()
def run(self, context):
"""
Runs the test step
:type context: TestStepContext
:param context: test case context
"""
BtBase.run(self, context)
# Collects pairing arguments defaulting the non passed ones
config = PairingConfig(self._pars)
# Pair the DUT with the device
pair_result = self._api.pair_to_device(config.address,
config.reconnect, config.accept,
config.pincode, config.passkey)
if pair_result[0] == BT_BOND_STATE.BOND_NONE:
if config.accept:
self._raise_device_exception("Pairing with device failed")
else:
return_msg = "Pairing with device rejected"
self._ts_verdict_msg = return_msg
self._logger.info(return_msg)
return
if pair_result[0] == BT_BOND_STATE.BOND_BONDED:
if config.accept:
return_msg = "Pairing with device succeeded"
self._ts_verdict_msg = return_msg
self._logger.info(return_msg)
return
else:
self._raise_device_exception(
"Pairing with device succeeded but it should not")
self._raise_device_exception(
"Unknown bond state returned by the device")
def run(self, context):
"""
Runs the test step
@type context: TestStepContext
@param context: test case context
"""
BtBase.run(self, context)
assert self._pars.must_find in [True, False], \
"MUST_FIND (%s) value should have been checked by the framework" % self._pars.must_find
all_devices_to_find = self._pars.devices_to_find.split(',')
devices_found = self._api.bt_find_multi_devices(all_devices_to_find, self._pars.tries)
if not devices_found and self._pars.must_find is True:
msg = "At list one device is not found"
self._logger.error(msg)
raise DeviceException(DeviceException.OPERATION_FAILED, msg)
elif devices_found and self._pars.must_find is False:
msg = "At list one device is not found and it shouldn't"
self._logger.error(msg)
raise DeviceException(DeviceException.OPERATION_FAILED, msg)
def run(self, context):
"""
Runs the test step
:type context: TestStepContext
:param context: test case context
"""
BtBase.run(self, context)
# Get the BT power status and post it in the context
power_status = self._api.get_bt_power_status()
if power_status == str(BT_STATE.STATE_ON):
power_status = TestConst.STR_ON
if power_status == str(BT_STATE.STATE_OFF):
power_status = TestConst.STR_OFF
context.set_info(self._pars.save_as, power_status)
self.ts_verdict_msg = "VERDICT: %s stored as {0}".format(
power_status) % self._pars.save_as
self._logger.debug(self.ts_verdict_msg)
def run(self, context):
"""
Runs the test step
:type context: TestStepContext
:param context: test case context
"""
BtBase.run(self, context)
if self._pars.timeout is not None:
timeout = self._pars.timeout
else:
timeout = self.DEFAULT_TIMEOUT
# Split the file names and strip each of them
file_list = split_and_strip(self._pars.files,
Constants.FILE_NAME_SEPARATOR)
if self._pars.expected_state == self._STATUS_ACCEPTED:
if not opp_accept_file(self._api, file_list[0], timeout):
msg = "remote device has not accepted the file on time"
raise DeviceException(DeviceException.OPERATION_FAILED, msg)
elif self._pars.expected_state == self._STATUS_CANCELED:
if not opp_check_file_cancelled(self._api, file_list[0], timeout):
msg = "remote device has not canceled the file on time"
raise DeviceException(DeviceException.OPERATION_FAILED, msg)
elif self._pars.expected_state == self._STATUS_WAITING_ACCEPT:
if not opp_check_file_waiting_accept(self._api, file_list[0],
timeout):
if not opp_accept_file(self._api, file_list[0], timeout):
msg = "remote device has not initiated the transfer on time"
raise DeviceException(DeviceException.OPERATION_FAILED,
msg)
elif self._pars.expected_state == self._STATUS_NONE:
if not opp_check_status_none(self._api, timeout):
msg = "remote device has a status different than none for a type it should not consider"
raise DeviceException(DeviceException.OPERATION_FAILED, msg)
def run(self, context):
"""
Runs the test step. The Accept command is implicitly included
in the bt_opp_check_service command
:type context: TestStepContext
:param context: test case context
"""
BtBase.run(self, context)
if self._pars.timeout is not None:
timeout = self._pars.timeout
else:
timeout = self.DEFAULT_TIMEOUT
# Split the file names and strip each of them
file_list = split_and_strip(self._pars.files,
Constants.FILE_NAME_SEPARATOR)
if not opp_accept_file(self._api, file_list[0], timeout):
msg = "remote device has not accepted the file on time"
raise DeviceException(DeviceException.OPERATION_FAILED, msg)
def run(self, context):
"""
Runs the test step
:type context: TestStepContext
:param context: test case context
"""
BtBase.run(self, context)
if self._pars.timeout is not None:
timeout = self._pars.timeout
else:
timeout = self.DEFAULT_TIMEOUT
# Split the file names and strip each of them
file_list = split_and_strip(self._pars.files,
Constants.FILE_NAME_SEPARATOR)
self._api.bt_opp_reject_file()
if not opp_check_file_cancelled(self._api, file_list[0], timeout):
msg = "remote device has not rejected the file on time"
raise DeviceException(DeviceException.OPERATION_FAILED, msg)
def _do_run(self, context):
"""
Executes the run logic
"""
BtBase.run(self, context)
self._setup_timeout_value()
self._logger.info(
"File transfer is supposed to complete in %d seconds" %
self._time_out)
file_names = split_and_strip(self._pars.files,
Constants.FILE_NAME_SEPARATOR)
self._num_expected_files = len(file_names)
self._logger.info("Expect to receive %d files" %
self._num_expected_files)
self._reach_expected_state()
self._save_file_size_if_needed(context)
self._save_file_chksum_if_needed(None, file_names, context)
self._validate_throughput_if_needed()