def __init__(self, tc_name, global_config):
"""
Constructor
"""
LabWifiDualBase.__init__(self, tc_name, global_config)
# AP must not be hidden
self._hidden = False
self._hidden_ap2 = False
# Get the parameter test phases
self._2_4ghz_test = self._tc_parameters.\
get_param_value("RUN_2_4_GHZ_TEST")
self._5ghz_test = self._tc_parameters.get_param_value("RUN_5_GHZ_TEST")
self._auto_test = self._tc_parameters.get_param_value("RUN_AUTO_TEST")
if str(self._2_4ghz_test).lower() in ["1", "true"]:
self._2_4ghz_test = True
else:
self._2_4ghz_test = False
if str(self._5ghz_test).lower() in ["1", "true"]:
self._5ghz_test = True
else:
self._5ghz_test = False
if str(self._auto_test).lower() in ["1", "true"]:
self._auto_test = True
else:
self._auto_test = False
def __init__(self, tc_name, global_config):
"""
Constructor
"""
LabWifiDualBase.__init__(self, tc_name, global_config)
LabWifiDfs.__init__(self, tc_name, global_config)
def __init__(self, tc_name, global_config):
"""
Constructor
"""
LabWifiDualBase.__init__(self, tc_name, global_config)
self._wrong_passphrase = None
def run_test(self):
"""
Execute the test
"""
LabWifiDualBase.run_test(self)
for (cur_band, ssid) in self._test_sequence:
# Set the new band
self._networking_api.set_wifi_frequency_band(
cur_band, False, self._dut_wlan_iface)
sleep(self._wait_btwn_cmd)
# Check the new band selection
res_band = self._networking_api.get_wifi_frequency_band(
self._dut_wlan_iface)
# Compare it to what has been set
if res_band != cur_band:
msg = "Got band %s instead of %s" % (res_band, cur_band)
self._logger.error(msg)
raise DeviceException(DeviceException.OPERATION_FAILED, msg)
# Check auto re-connection the other ssid
self._logger.info("Waiting % sec to reconnect" %
self._reconnection_time)
sleep(self._reconnection_time)
self._networking_api.check_connection_state(ssid)
return Global.SUCCESS, "No error"
def set_up(self):
"""
Initialize the test
"""
LabWifiDualBase.set_up(self)
# Check TC parameters
if self._ftp_transfer and not self._dl_filename_param:
msg = "Missing TC parameter: FTP_DL_FILENAME: " + str(
self._dl_filename_param)
self._logger.error(msg)
raise AcsConfigException(AcsConfigException.INVALID_PARAMETER, msg)
if self._xfer_timeout in (None, ""):
self._xfer_timeout = 200
else:
self._xfer_timeout = float(self._xfer_timeout)
# Set Wifi sleep policy to "Never Sleep"
self._networking_api.set_wifi_sleep_policy(
self._networking_api.WIFI_SLEEP_POLICY["NEVER"])
# Warn the user if the AP are not Cisco 12xx
if not self._ns.get_model().startswith("CISCO_12") \
or not self._ns_ap2.get_model().startswith("CISCO_12"):
self._logger.warning(
"You will have better reliability using 2 CISCO 12xx APs")
return Global.SUCCESS, "No errors"
def set_up(self):
"""
Initialize the test
"""
LabWifiDualBase.set_up(self)
# Disconnect Wifi from both APs
self._networking_api.wifi_disconnect_all()
return Global.SUCCESS, "No errors"
def __init__(self, tc_name, global_config):
"""
Constructor
"""
LabWifiDualBase.__init__(self, tc_name, global_config)
# Parameter for ping controls
self._packetsize = 32
self._packnb = 4
self._lossrate = 25
def tear_down(self):
"""
End and dispose the test
"""
LabWifiDualBase.tear_down(self)
# Reset the Frequency Band parameter to "auto"
self._networking_api.set_wifi_frequency_band("auto", False,
self._dut_wlan_iface)
return Global.SUCCESS, "No errors"
def __init__(self, tc_name, global_config): # pylint: disable=W0231
"""
Constructor
"""
LabWifiDualBase.__init__(self, tc_name, global_config)
if self._ssid != self._ssid_ap2:
msg = "SSID AP2 name [%s] different of SSID AP1. Force SSID AP2 name to [%s]" \
% (self._ssid_ap2, self._ssid)
self._logger.warning(msg)
self._ssid_ap2 = self._ssid
def set_up(self):
"""
Initialize the test
"""
LabWifiDualBase.set_up(self)
# Connect DUT to AP 1
self._networking_api.wifi_connect(self._ssid, False)
# call the generic LabWifiDsf._set_up() method
self._set_up()
return Global.SUCCESS, "no_error"
def run_test(self):
"""
Execute the test
"""
LabWifiDualBase.run_test(self)
if self._ftp_transfer:
self.__run_test_ftp()
else:
self.__run_test_ping()
return Global.SUCCESS, "No errors"
def run_test(self):
"""
Execute the test
"""
# pylint: disable=E1101
LabWifiDualBase.run_test(self)
# Remove the 2nd SSID in known network list
self._networking_api.wifi_remove_config(self._ssid_ap2)
# And add the corrupted one
self._networking_api.set_wificonfiguration(
self._ssid_ap2, self._wrong_passphrase, self._security_ap2,
self._ip_setting_ap2, self._ip_address_ap2, self._netmask_ap2,
self._gateway_ap2, self._dns1_ap2, self._dns2_ap2)
time.sleep(self._wait_btwn_cmd)
# Start log monitoring
self._networking_api.start_wifi_connection_log()
# Try to connect with the wrong passphrase
self._networking_api.wifi_connect(self._ssid_ap2, False)
# Control the connection status
connection_status = self._networking_api.\
get_wifi_connection_status_log(self._ssid_ap2)
self._logger.info("Connection log read: %s" % connection_status)
if connection_status != "FAILURE":
msg = "Unable to retrieve connection failure information from log"
raise DeviceException(DeviceException.OPERATION_FAILED, msg)
# Set SSID back to ENABLE
# (since wifi_connect automatically disables all other known SSIDs)
self._networking_api.set_autoconnect_mode(self._ssid,
AUTO_CONNECT_STATE.on)
# Now wait for the connection back to the 1st AP
time.sleep(self._wait_btwn_cmd)
self._networking_api.check_connection_state(self._ssid)
# Connect to the 2nd SSID with the Good passphrase
self._networking_api.wifi_remove_config(self._ssid_ap2)
self._networking_api.set_wificonfiguration(
self._ssid_ap2, self._passphrase_ap2, self._security_ap2,
self._ip_setting_ap2, self._ip_address_ap2, self._netmask_ap2,
self._gateway_ap2, self._dns1_ap2, self._dns2_ap2)
time.sleep(self._wait_btwn_cmd)
# Connect and check the SSID connection
self._networking_api.wifi_connect(self._ssid_ap2)
return Global.SUCCESS, "no_error"
def set_up(self):
"""
Initialize the test
"""
# pylint: disable=E1101
LabWifiDualBase.set_up(self)
# Control that the TC parameters has been correctly set.
if self._standard not in ["a", "n5G"]:
msg = "AP1 is not set to 5GHz. Standard set: %s" % self._standard
self._logger.error(msg)
raise AcsConfigException(AcsConfigException.INVALID_PARAMETER, msg)
if self._standard_ap2 not in ["gb", "ngb", "n2.4G"]:
msg = "AP2 is not set to 2.4GHz. Standard set: %s" \
% self._standard_ap2
self._logger.error(msg)
raise AcsConfigException(AcsConfigException.INVALID_PARAMETER, msg)
if self._channel != "1":
self._logger.warning("AP1 channel is not 1 as advise: %s" %
self._channel)
if self._channel_ap2 != "1":
self._logger.warning("AP2 channel is not 1 as advise: %s" %
self._channel_ap2)
if not self._24to5 and not self._5to24:
msg = "At least 1 of the parameter 2_4_TO_5_GHZ or 5_TO_2_4_GHZ "
msg += "should be enabled"
self._logger.error(msg)
raise AcsConfigException(AcsConfigException.INVALID_PARAMETER, msg)
# Set band selection to "auto"
self._networking_api.set_wifi_frequency_band("auto", False,
self._dut_wlan_iface)
if self._24to5:
# Connect to 2.4GHz AP
self._networking_api.wifi_connect(self._ssid_ap2)
self._test_sequence += [["5GHz", self._ssid]]
if self._5to24:
if not self._24to5:
# Connect to 5GHz AP
self._networking_api.wifi_connect(self._ssid)
self._test_sequence += [["2.4GHz", self._ssid_ap2]]
# Set autoconnect for both SSIDs
self._networking_api.set_autoconnect_mode(self._ssid,
AUTO_CONNECT_STATE.on)
self._networking_api.set_autoconnect_mode(self._ssid_ap2,
AUTO_CONNECT_STATE.on)
return Global.SUCCESS, "No errors"
def run_test(self):
"""
Execute the test
"""
LabWifiDualBase.run_test(self)
if self._auto_test:
ssids = self.__run_band_scan("auto")
if self._ssid not in ssids:
msg = "auto: Unable to scan 2.4GHz AP"
self._logger.error(msg)
raise DeviceException(DeviceException.OPERATION_FAILED, msg)
if self._ssid_ap2 not in ssids:
msg = "auto: Unable to scan 5GHz AP"
self._logger.error(msg)
raise DeviceException(DeviceException.OPERATION_FAILED, msg)
if self._2_4ghz_test:
ssids = self.__run_band_scan("2.4GHz")
if self._ssid_ap2 not in ssids:
msg = "2.4GHz: Unable to scan 2.4GHz AP"
self._logger.error(msg)
raise DeviceException(DeviceException.OPERATION_FAILED, msg)
if self._ssid in ssids:
msg = "2.4GHz: Able to scan 5GHz AP"
self._logger.error(msg)
raise DeviceException(DeviceException.OPERATION_FAILED, msg)
if self._5ghz_test:
ssids = self.__run_band_scan("5GHz")
if self._ssid not in ssids:
msg = "5GHz: Unable to scan 5GHz AP"
self._logger.error(msg)
raise DeviceException(DeviceException.OPERATION_FAILED, msg)
if self._ssid_ap2 in ssids:
msg = "5GHz: Able to scan 2.4GHz AP"
self._logger.error(msg)
raise DeviceException(DeviceException.OPERATION_FAILED, msg)
return Global.SUCCESS, "No errors"
def run_test(self):
"""
Execute the test
"""
LabWifiDualBase.run_test(self)
# Connect DUT to the 1st AP and check connection SSID
self._networking_api.wifi_connect(self._ssid, True)
time.sleep(self._wait_btwn_cmd)
# Waiting for an IP address from DHCP
self._networking_api.wait_for_wifi_dhcp_connected()
# retrieve DUT ip address
dut_ip_address = self._networking_api.get_wifi_ip_address()
# Checks connection using Ping
packetloss = self._networking_api.ping(self._wifirouter_ip,
self._packetsize,
self._packnb,
source_address=dut_ip_address)
if packetloss.value > self._lossrate:
msg = "AP1: Ping command fails (%s% loss)" % str(packetloss.value)
self._logger.error(msg)
raise DeviceException(DeviceException.PROHIBITIVE_MEASURE, msg)
# Connect DUT to the 2nd AP check connection SSID
self._networking_api.wifi_connect(self._ssid_ap2, True)
time.sleep(self._wait_btwn_cmd)
# Waiting for an IP address from DHCP
self._networking_api.wait_for_wifi_dhcp_connected()
# retrieve DUT ip address
dut_ip_address = self._networking_api.get_wifi_ip_address()
# Checks connection using Ping
packetloss = self._networking_api.ping(self._wifirouter_ip_ap2,
self._packetsize,
self._packnb,
source_address=dut_ip_address)
if packetloss.value > self._lossrate:
msg = "AP2: Ping command fails (%s% loss)" % str(packetloss.value)
self._logger.error(msg)
raise DeviceException(DeviceException.PROHIBITIVE_MEASURE, msg)
return Global.SUCCESS, "No errors"
def __init__(self, tc_name, global_config):
"""
Constructor
"""
LabWifiDualBase.__init__(self, tc_name, global_config)
# Do we use the same SSID on both Access Points?
self._same_ssid = self._tc_parameters.get_param_value(
"AP2_USES_SAME_SSID_AND_SECURITY")
if str(self._same_ssid).upper() in ("YES", "TRUE"):
self._same_ssid = True
# Overwrite LabWifiDualBase parameter initialization
self._ssid_ap2 = self._ssid
self._security_ap2 = self._security
self._passphrase_ap2 = self._passphrase
else:
self._same_ssid = False
# Do we test roaming while FTP transfer?
self._ftp_transfer = self._tc_parameters.\
get_param_value("SWITCH_BETWEEN_AP_DURING_FTP_TRANSFER")
if str(self._ftp_transfer).upper() in ("YES", "TRUE"):
self._ftp_transfer = True
else:
self._ftp_transfer = False
# Get UECmdLayer
self._phonesystem_api = self._device.get_uecmd("PhoneSystem")
# Parameter for ping controls
self._packetsize = 32
self._packnb = 4
self._lossrate = 25
# Parameter for FTP transfer
self._direction = "DL"
self._dl_filename_param = self._tc_parameters.get_param_value(
"FTP_DL_FILENAME")
self._xfer_timeout = self._tc_parameters.get_param_value(
"XFER_TIMEOUT")
self._dl_filename = os.path.join(self._ftp_path,
self._dl_filename_param)
self._dut_mac_address_for_connection_check = ""
def set_up(self):
"""
Initialize the test
"""
LabWifiDualBase.set_up(self)
# Control that the security is not OPEN
if str(self._security_ap2).upper() in ["NONE", "OPEN"]:
msg = "WIFI_SECURITY_AP2 UseCase parameter should not be " + \
"undefined nor OPEN: %s" % str(self._security_ap2)
self._logger.error(msg)
raise AcsConfigException(AcsConfigException.INVALID_PARAMETER, msg)
# Generate a corrupted passphrase
if self._security_ap2 == "EAP-WPA" or self._security_ap2 == "EAP-WPA2":
self._wrong_passphrase = self._eap_method_ap2 + "-" \
+ self._phase2_auth_ap2 + "_" + self._eap_user \
+ "_" + self._corrupt_pass(self._eap_password) + "_" \
+ self._certificat_name + "_" + str(self._mandatory_cert)
else:
self._wrong_passphrase = self._corrupt_pass(self._passphrase_ap2)
return Global.SUCCESS, "No errors"
def __init__(self, tc_name, global_config):
"""
Constructor
"""
LabWifiDualBase.__init__(self, tc_name, global_config)
self._24to5 = str(self._tc_parameters.get_param_value("2_4_TO_5_GHZ"))
self._5to24 = str(self._tc_parameters.get_param_value("5_TO_2_4_GHZ"))
if self._24to5.lower() in ["true", "1", "yes"]:
self._24to5 = True
else:
self._24to5 = False
if self._5to24.lower() in ["true", "1", "yes"]:
self._5to24 = True
else:
self._5to24 = False
self._test_sequence = []
# AP must not be hidden
self._hidden = False
self._hidden_ap2 = False
self._reconnection_time = 10