def __init__(self,
aminer_config,
ruleset,
anomaly_event_handlers,
persistence_id='Default',
output_log_line=True):
"""
Initialize the detector. This will also trigger reading or creation of persistence storage location.
@param ruleset a list of MatchRule rules with appropriate CorrelationRules attached as actions.
"""
self.aminer_config = aminer_config
self.event_classification_ruleset = ruleset
self.anomaly_event_handlers = anomaly_event_handlers
self.next_persist_time = time.time(
) + self.aminer_config.config_properties.get(
AminerConfig.KEY_PERSISTENCE_PERIOD,
AminerConfig.DEFAULT_PERSISTENCE_PERIOD)
self.persistence_id = persistence_id
self.output_log_line = output_log_line
self.last_log_atom = None
event_correlation_set = set()
for rule in self.event_classification_ruleset:
if rule.match_action.artefact_a_rules is not None:
event_correlation_set |= set(
rule.match_action.artefact_a_rules)
if rule.match_action.artefact_b_rules is not None:
event_correlation_set |= set(
rule.match_action.artefact_b_rules)
self.event_correlation_ruleset = list(event_correlation_set)
self.persistence_file_name = AminerConfig.build_persistence_file_name(
aminer_config, self.__class__.__name__, persistence_id)
PersistenceUtil.add_persistable_component(self)
def __init__(self, aminer_config, property_path, bin_definition, report_interval, report_event_handlers, reset_after_report_flag=True,
persistence_id='Default', output_log_line=True):
"""
Initialize the analysis component.
@param report_interval delay in seconds between creation of two reports. The parameter is applied to the parsed record data
time, not the system time. Hence reports can be delayed when no data is received.
"""
self.last_report_time = None
self.next_report_time = 0.0
self.property_path = property_path
self.bin_definition = bin_definition
self.histogram_data = {}
self.report_interval = report_interval
self.report_event_handlers = report_event_handlers
self.reset_after_report_flag = reset_after_report_flag
self.persistence_id = persistence_id
self.next_persist_time = None
self.output_log_line = output_log_line
self.aminer_config = aminer_config
self.persistence_file_name = build_persistence_file_name(aminer_config, self.__class__.__name__, persistence_id)
PersistenceUtil.add_persistable_component(self)
persistence_data = PersistenceUtil.load_json(self.persistence_file_name)
if persistence_data is not None:
msg = 'No data reading, def merge yet'
logging.getLogger(DEBUG_LOG_NAME).error(msg)
raise Exception(msg)
def __init__(self,
aminer_config,
target_path_list,
anomaly_event_handlers,
persistence_id='Default',
allow_missing_values_flag=False,
auto_include_flag=False,
output_log_line=True):
"""
Initialize the detector. This will also trigger reading or creation of persistence storage location.
@param target_path_list the list of values to extract from each match to create the value combination to be checked.
@param allow_missing_values_flag when set to True, the detector will also use matches, where one of the pathes from target_path_list
does not refer to an existing parsed data object.
@param auto_include_flag when set to True, this detector will report a new value only the first time before including it
in the known values set automatically.
"""
self.target_path_list = target_path_list
self.anomaly_event_handlers = anomaly_event_handlers
self.allow_missing_values_flag = allow_missing_values_flag
self.auto_include_flag = auto_include_flag
self.output_log_line = output_log_line
self.aminer_config = aminer_config
self.persistence_id = persistence_id
self.log_success = 0
self.log_total = 0
self.log_learned_path_value_combos = 0
self.log_new_learned_values = []
self.persistence_file_name = AminerConfig.build_persistence_file_name(
aminer_config, self.__class__.__name__, persistence_id)
self.next_persist_time = None
self.known_values_set = set()
self.load_persistence_data()
PersistenceUtil.add_persistable_component(self)
def __init__(self,
aminer_config,
anomaly_event_handlers,
persistence_id='Default',
target_path_list=None,
allow_missing_values_flag=True,
ignore_list=None,
output_log_line=True,
auto_include_flag=False,
time_window_length=86400,
max_time_diff=360,
num_reduce_time_list=10):
"""
Initialize the detector. This will also trigger reading or creation of persistence storage location.
@param aminer_config configuration from analysis_context.
@param anomaly_event_handlers for handling events, e.g., print events to stdout.
@param persistence_id name of persistency document.
@param target_path_list parser paths of values to be analyzed. Multiple paths mean that values are analyzed by their combined
occurrences. When no paths are specified, the events given by the full path list are analyzed.
@param allow_missing_values_flag when set to True, the detector will also use matches, where one of the pathes from target_path_list
does not refer to an existing parsed data object.
@param ignore_list list of paths that are not considered for correlation, i.e., events that contain one of these paths are
omitted. The default value is [] as None is not iterable.
@param output_log_line specifies whether the full parsed log atom should be provided in the output.
@param auto_include_flag specifies whether new frequency measurements override ground truth frequencies.
@param time_window_length length of the time window for which the appearances of log lines are identified with each other.
Value of 86400 specfies a day and 604800 a week.
@param max_time_diff maximal time difference in seconds for new times. If the difference of the new time to all previous times is
greater than max_time_diff the new time is considered an anomaly.
@param num_reduce_time_list number of new time entries appended to the time list, before the list is being reduced.
"""
self.next_persist_time = None
self.anomaly_event_handlers = anomaly_event_handlers
self.auto_include_flag = auto_include_flag
self.allow_missing_values_flag = allow_missing_values_flag
self.aminer_config = aminer_config
self.output_log_line = output_log_line
self.ignore_list = ignore_list
if self.ignore_list is None:
self.ignore_list = []
self.target_path_list = target_path_list
if self.target_path_list is None:
self.target_path_list = []
self.time_window_length = time_window_length
self.max_time_diff = max_time_diff
self.num_reduce_time_list = num_reduce_time_list
# Keys: Tuple of values of the paths of target_path_list, Entries: List of all appeared times to the tuple.
self.appeared_time_list = {}
# Keys: Tuple of values of the paths of target_path_list, Entries: Counter of appended times to the time list since last reduction.
self.counter_reduce_time_intervals = {}
# Loads the persistence
self.persistence_id = persistence_id
self.persistence_file_name = AminerConfig.build_persistence_file_name(
aminer_config, self.__class__.__name__, persistence_id)
PersistenceUtil.add_persistable_component(self)
# Imports the persistence
self.load_persistence_data()
def __init__(self,
aminer_config,
target_path_list,
anomaly_event_handlers,
persistence_id='Default',
auto_include_flag=False,
output_log_line=True):
"""Initialize the detector. This will also trigger reading or creation of persistence storage location."""
self.target_path_list = target_path_list
self.anomaly_event_handlers = anomaly_event_handlers
self.auto_include_flag = auto_include_flag
self.output_log_line = output_log_line
self.aminer_config = aminer_config
self.next_persist_time = time.time(
) + self.aminer_config.config_properties.get(
KEY_PERSISTENCE_PERIOD, DEFAULT_PERSISTENCE_PERIOD)
self.persistence_id = persistence_id
self.log_success = 0
self.log_total = 0
self.log_learned_path_values = 0
self.log_new_learned_values = []
self.persistence_file_name = build_persistence_file_name(
aminer_config, self.__class__.__name__, persistence_id)
PersistenceUtil.add_persistable_component(self)
persistence_data = PersistenceUtil.load_json(
self.persistence_file_name)
if persistence_data is None:
self.known_values_set = set()
else:
self.known_values_set = set(persistence_data)
logging.getLogger(DEBUG_LOG_NAME).debug(
'%s loaded persistence data.', self.__class__.__name__)
def __init__(self,
aminer_config,
anomaly_event_handlers,
id_path_list,
target_path_list=None,
persistence_id='Default',
auto_include_flag=False,
output_log_line=True,
ignore_list=None,
constraint_list=None):
"""
Initialize the detector. This will also trigger reading or creation of persistence storage location.
@param aminer_config configuration from analysis_context.
@param anomaly_event_handlers for handling events, e.g., print events to stdout.
@param id_path_list to specify group identifiers for which numeric ranges should be learned.
@param target_path_list parser paths of values to be analyzed. Multiple paths mean that all values occurring in these paths
are considered for value range generation.
@param persistence_id name of persistency document.
@param auto_include_flag specifies whether value ranges should be extended when values outside of ranges are observed.
@param output_log_line specifies whether the full parsed log atom should be provided in the output.
@param ignore_list list of paths that are not considered for analysis, i.e., events that contain one of these paths are
omitted.
@param constrain_list list of paths that have to be present in the log atom to be analyzed.
"""
self.target_path_list = target_path_list
self.anomaly_event_handlers = anomaly_event_handlers
self.auto_include_flag = auto_include_flag
self.next_persist_time = None
self.output_log_line = output_log_line
self.aminer_config = aminer_config
self.persistence_id = persistence_id
self.id_path_list = id_path_list
if constraint_list is None:
self.constraint_list = []
else:
self.constraint_list = set(constraint_list)
if ignore_list is None:
self.ignore_list = []
else:
self.ignore_list = set(ignore_list)
self.log_total = 0
self.log_success = 0
self.ranges_min = {}
self.ranges_max = {}
# Persisted data consists of min and max values for each identifier, i.e.,
# [["min", [<id1, id2, ...>], <min_value>], ["max", [<id1, id2, ...>], <max_value>]]
self.persistence_file_name = AminerConfig.build_persistence_file_name(
aminer_config, self.__class__.__name__, persistence_id)
PersistenceUtil.add_persistable_component(self)
persistence_data = PersistenceUtil.load_json(
self.persistence_file_name)
if persistence_data is not None:
for l in persistence_data:
if l[0] == 'min':
self.ranges_min[tuple(l[1])] = float(l[2])
elif l[0] == 'max':
self.ranges_max[tuple(l[1])] = float(l[2])
def __init__(self,
aminer_config,
target_path_list,
anomaly_event_handlers,
persistence_id='Default',
auto_include_flag=False,
default_interval=3600,
realert_interval=86400,
output_log_line=True):
"""
Initialize the detector. This will also trigger reading or creation of persistence storage location.
@param target_path_list to extract a source identification value from each logatom.
"""
self.target_path_list = target_path_list
self.anomaly_event_handlers = anomaly_event_handlers
self.auto_include_flag = auto_include_flag
self.default_interval = default_interval
self.realert_interval = realert_interval
# This timestamps is compared with timestamp values from log atoms for activation of alerting logic. The first timestamp from logs
# above this value will trigger alerting.
self.next_check_timestamp = 0
self.last_seen_timestamp = 0
self.output_log_line = output_log_line
self.aminer_config = aminer_config
self.next_persist_time = time.time(
) + self.aminer_config.config_properties.get(
KEY_PERSISTENCE_PERIOD, DEFAULT_PERSISTENCE_PERIOD)
self.persistence_id = persistence_id
self.log_success = 0
self.log_total = 0
self.log_learned_values = 0
self.log_new_learned_values = []
self.persistence_file_name = build_persistence_file_name(
aminer_config, self.__class__.__name__, persistence_id)
PersistenceUtil.add_persistable_component(self)
persistence_data = PersistenceUtil.load_json(
self.persistence_file_name)
self.expected_values_dict = {}
if persistence_data is not None:
for key in persistence_data:
value = persistence_data[key]
if self.target_path_list is not None: # skipcq: PTC-W0048
if value[3] != self.target_path_list:
continue
elif self.target_path_list is not None and value[
3] not in self.target_path_list:
continue
if value[1] != default_interval:
value[1] = default_interval
value[2] = value[0] + default_interval
self.expected_values_dict[key] = value
logging.getLogger(DEBUG_LOG_NAME).debug(
'%s loaded persistence data.', self.__class__.__name__)
self.analysis_string = 'Analysis.%s'
def __init__(self,
aminer_config,
anomaly_event_handlers,
timestamp_path,
analyze_path_list,
min_bin_elements,
min_bin_time,
debug_mode=False,
persistence_id='Default',
output_log_line=True):
"""
Initialize the detector. This will also trigger reading or creation of persistence storage location.
@param timestamp_path if not None, use this path value for timestamp based bins.
@param analyze_path_list list of match paths to analyze in this detector.
@param min_bin_elements evaluate the latest bin only after at least that number of elements was added to it.
@param min_bin_time evaluate the latest bin only when the first element is received after min_bin_time has elapsed.
@param debug_mode if true, generate an analysis report even when average of last bin was within expected range.
"""
self.anomaly_event_handlers = anomaly_event_handlers
self.timestamp_path = timestamp_path
self.min_bin_elements = min_bin_elements
self.min_bin_time = min_bin_time
self.debug_mode = debug_mode
self.next_persist_time = None
self.persistence_id = persistence_id
self.output_log_line = output_log_line
self.aminer_config = aminer_config
self.persistence_file_name = build_persistence_file_name(
aminer_config, self.__class__.__name__, persistence_id)
PersistenceUtil.add_persistable_component(self)
persistence_data = PersistenceUtil.load_json(
self.persistence_file_name)
self.stat_data = []
for path in analyze_path_list:
self.stat_data.append((
path,
[],
))
if persistence_data is not None:
for val in persistence_data:
if isinstance(val, str):
val = val.strip('[').strip(']').split(',', 2)
path = val[0].strip('"')
values = val[1].strip(' ').strip('[').strip(']')
else:
path = val[0]
values = val[1]
index = 0
for p, _ in self.stat_data:
if p == path:
break
index += 1
for value in values:
self.stat_data[index][1].append(value)
def __init__(self, aminer_config, anomaly_event_handlers, id_path_list=None, target_path_list=None, seq_len=3, persistence_id='Default',
auto_include_flag=False, output_log_line=True, ignore_list=None, constraint_list=None):
"""
Initialize the detector. This will also trigger reading or creation of persistence storage location.
@param aminer_config configuration from analysis_context.
@param target_path_list parser paths of values to be analyzed. Multiple paths mean that values are analyzed by their combined
occurrences. When no paths are specified, the events given by the full path list are analyzed.
@param anomaly_event_handlers for handling events, e.g., print events to stdout.
@param id_path_list one or more paths that specify the trace of the sequence detection, i.e., incorrect sequences that are
generated by interleaved events can be avoided when event sequence identifiers are available.
@param seq_len the length of the sequences to be learned (larger lengths increase precision, but may overfit the data).
@param persistence_id name of persistency document.
@param auto_include_flag specifies whether new frequency measurements override ground truth frequencies.
@param output_log_line specifies whether the full parsed log atom should be provided in the output.
@param ignore_list list of paths that are not considered for analysis, i.e., events that contain one of these paths are
omitted. The default value is [] as None is not iterable.
@param constrain_list list of paths that have to be present in the log atom to be analyzed.
"""
self.target_path_list = target_path_list
self.anomaly_event_handlers = anomaly_event_handlers
self.auto_include_flag = auto_include_flag
self.next_persist_time = None
self.output_log_line = output_log_line
self.aminer_config = aminer_config
self.persistence_id = persistence_id
self.id_path_list = id_path_list
if id_path_list is None:
self.id_path_list = []
self.constraint_list = constraint_list
if self.constraint_list is None:
self.constraint_list = []
self.ignore_list = ignore_list
if self.ignore_list is None:
self.ignore_list = []
self.seq_len = seq_len
self.sequences = set()
self.current_sequences = {}
self.log_total = 0
self.log_success = 0
self.log_learned = 0
self.log_learned_sequences = []
self.persistence_file_name = AminerConfig.build_persistence_file_name(aminer_config, self.__class__.__name__, persistence_id)
PersistenceUtil.add_persistable_component(self)
# Persisted data contains lists of sequences, i.e., [[<seq1_elem1>, <seq1_elem2>], [<seq2_elem1, ...], ...]
# Thereby, sequence elements may be tuples, i.e., combinations of values, or paths that define events.
persistence_data = PersistenceUtil.load_json(self.persistence_file_name)
if persistence_data is not None:
for sequence in persistence_data:
sequence_elem_tuple = []
for sequence_elem in sequence:
sequence_elem_tuple.append(tuple(sequence_elem))
self.sequences.add(tuple(sequence_elem_tuple))
logging.getLogger(AminerConfig.DEBUG_LOG_NAME).debug('%s loaded persistence data.', self.__class__.__name__)
def __init__(self, aminer_config, anomaly_event_handlers, target_path_list=None, window_size=600, confidence_factor=0.5,
persistence_id='Default', auto_include_flag=False, output_log_line=True, ignore_list=None, constraint_list=None):
"""
Initialize the detector. This will also trigger reading or creation of persistence storage location.
@param aminer_config configuration from analysis_context.
@param target_path_list parser paths of values to be analyzed. Multiple paths mean that values are analyzed by their combined
occurrences. When no paths are specified, the events given by the full path list are analyzed.
@param anomaly_event_handlers for handling events, e.g., print events to stdout.
@param window_size the length of the time window for counting in seconds.
@param confidence_factor defines range of tolerable deviation of measured frequency from ground truth frequency gt by
[gf * confidence_factor, gf / confidence_factor]. confidence_factor must be in range [0, 1].
@param persistence_id name of persistency document.
@param auto_include_flag specifies whether new frequency measurements override ground truth frequencies.
@param output_log_line specifies whether the full parsed log atom should be provided in the output.
@param ignore_list list of paths that are not considered for analysis, i.e., events that contain one of these paths are
omitted. The default value is [] as None is not iterable.
@param constrain_list list of paths that have to be present in the log atom to be analyzed.
"""
self.target_path_list = target_path_list
self.anomaly_event_handlers = anomaly_event_handlers
self.auto_include_flag = auto_include_flag
self.next_persist_time = None
self.output_log_line = output_log_line
self.aminer_config = aminer_config
self.persistence_id = persistence_id
self.constraint_list = constraint_list
if self.constraint_list is None:
self.constraint_list = []
self.ignore_list = ignore_list
if self.ignore_list is None:
self.ignore_list = []
self.window_size = window_size
if not 0 <= confidence_factor <= 1:
logging.getLogger(DEBUG_LOG_NAME).warning('confidence_factor must be in the range [0,1]!')
confidence_factor = 1
self.confidence_factor = confidence_factor
self.next_check_time = None
self.counts = {}
self.counts_prev = {}
self.log_total = 0
self.log_success = 0
self.log_windows = 0
self.persistence_file_name = build_persistence_file_name(aminer_config, self.__class__.__name__, persistence_id)
PersistenceUtil.add_persistable_component(self)
# Persisted data contains lists of event-frequency pairs, i.e., [[<ev1, ev2>, <freq>], [<ev1, ev2>, <freq>], ...]
persistence_data = PersistenceUtil.load_json(self.persistence_file_name)
if persistence_data is not None:
for entry in persistence_data:
log_event = entry[0]
frequency = entry[1]
self.counts_prev[tuple(log_event)] = frequency
logging.getLogger(DEBUG_LOG_NAME).debug('%s loaded persistence data.', self.__class__.__name__)
def __init__(self,
aminer_config,
anomaly_event_handlers,
parallel_check_count,
persistence_id='Default',
record_count_before_event=10000,
output_log_line=True,
use_path_match=True,
use_value_match=True,
min_rule_attributes=1,
max_rule_attributes=5):
"""
Initialize the detector. This will also trigger reading or creation of persistence storage location.
@param parallel_check_count number of rule detection checks to run in parallel.
@param record_count_before_event number of events used to calculate statistics (i.e., window size)
@param min_rule_attributes minimum number of attributes forming a rule
@param max_rule_attributes maximum number of attributes forming a rule
@param use_path_match if true rules are build based on path existance
@param use_value_match if true rules are built based on actual values
"""
self.last_timestamp = 0.0
self.parallel_check_count = parallel_check_count
self.anomaly_event_handlers = anomaly_event_handlers
self.min_rule_attributes = min_rule_attributes
self.max_rule_attributes = max_rule_attributes
self.last_unhandled_match = None
self.total_records = 0
self.record_count_before_event = record_count_before_event
self.persistence_id = persistence_id
self.output_log_line = output_log_line
self.use_path_match = use_path_match
self.use_value_match = use_value_match
self.aminer_config = aminer_config
self.next_persist_time = time.time(
) + self.aminer_config.config_properties.get(
KEY_PERSISTENCE_PERIOD, DEFAULT_PERSISTENCE_PERIOD)
self.persistence_file_name = build_persistence_file_name(
aminer_config, self.__class__.__name__, persistence_id)
PersistenceUtil.add_persistable_component(self)
persistence_data = PersistenceUtil.load_json(
self.persistence_file_name)
if persistence_data is None:
self.feature_list = []
self.event_count_table = [
0
] * parallel_check_count * parallel_check_count * 2
self.event_delta_table = [
0
] * parallel_check_count * parallel_check_count * 2
else:
logging.getLogger(DEBUG_LOG_NAME).debug(
'%s loaded persistence data.', self.__class__.__name__)
def __init__(self,
aminer_config,
target_path_list,
anomaly_event_handlers,
id_path_list,
min_allowed_time_diff,
persistence_id='Default',
allow_missing_values_flag=False,
auto_include_flag=False,
output_log_line=True):
"""
Initialize the detector. This will also trigger reading or creation of persistence storage location.
@param target_path_list the list of values to extract from each match to create the value combination to be checked.
@param id_path_list the list of pathes where id values can be stored in all relevant log event types.
@param min_allowed_time_diff the minimum amount of time in seconds after the first appearance of a log atom with a specific id
that is waited for other log atoms with the same id to occur. The maximum possible time to keep an incomplete combo
is 2*min_allowed_time_diff
@param allow_missing_values_flag when set to True, the detector will also use matches, where one of the pathes from target_path_list
does not refer to an existing parsed data object.
@param auto_include_flag when set to True, this detector will report a new value only the first time before including it
in the known values set automatically.
"""
self.target_path_list = target_path_list
self.anomaly_event_handlers = anomaly_event_handlers
self.id_path_list = id_path_list
self.min_allowed_time_diff = min_allowed_time_diff
self.allow_missing_values_flag = allow_missing_values_flag
self.auto_include_flag = auto_include_flag
self.output_log_line = output_log_line
self.aminer_config = aminer_config
self.persistence_id = persistence_id
self.log_success = 0
self.log_total = 0
self.log_learned_path_value_combos = 0
self.log_new_learned_values = []
self.persistence_file_name = build_persistence_file_name(
aminer_config, self.__class__.__name__, persistence_id)
self.next_persist_time = time.time(
) + self.aminer_config.config_properties.get(
KEY_PERSISTENCE_PERIOD, DEFAULT_PERSISTENCE_PERIOD)
self.load_persistence_data()
PersistenceUtil.add_persistable_component(self)
self.id_dict_current = {}
self.id_dict_old = {}
self.next_shift_time = None
def __init__(self,
aminer_config,
histogram_defs,
report_interval,
report_event_handlers,
reset_after_report_flag=True,
persistence_id='Default',
output_log_line=True):
"""
Initialize the analysis component.
@param histogram_defs is a list of tuples containing the target property path to analyze and the BinDefinition to apply for
binning.
@param report_interval delay in seconds between creation of two reports. The parameter is applied to the parsed record data
time, not the system time. Hence reports can be delayed when no data is received.
"""
self.last_report_time = None
self.next_report_time = 0.0
self.histogram_data = []
for (path, bin_definition) in histogram_defs:
self.histogram_data.append(HistogramData(path, bin_definition))
self.report_interval = report_interval
self.report_event_handlers = report_event_handlers
self.reset_after_report_flag = reset_after_report_flag
self.persistence_id = persistence_id
self.output_log_line = output_log_line
self.aminer_config = aminer_config
self.next_persist_time = time.time(
) + self.aminer_config.config_properties.get(
KEY_PERSISTENCE_PERIOD, DEFAULT_PERSISTENCE_PERIOD)
self.persistence_file_name = build_persistence_file_name(
aminer_config, self.__class__.__name__, persistence_id)
PersistenceUtil.add_persistable_component(self)
persistence_data = PersistenceUtil.load_json(
self.persistence_file_name)
if persistence_data is not None:
msg = 'No data reading, def merge yet'
logging.getLogger(DEBUG_LOG_NAME).error(msg)
raise Exception(msg)
def __init__(self, aminer_config, anomaly_event_handlers, persistence_id='Default', auto_include_flag=False, output_log_line=True):
"""Initialize the detector. This will also trigger reading or creation of persistence storage location."""
self.anomaly_event_handlers = anomaly_event_handlers
self.auto_include_flag = auto_include_flag
self.next_persist_time = None
self.output_log_line = output_log_line
self.aminer_config = aminer_config
self.persistence_id = persistence_id
self.log_success = 0
self.log_total = 0
self.log_learned_paths = 0
self.log_new_learned_paths = []
PersistenceUtil.add_persistable_component(self)
self.persistence_file_name = AMinerConfig.build_persistence_file_name(aminer_config, self.__class__.__name__, persistence_id)
persistence_data = PersistenceUtil.load_json(self.persistence_file_name)
if persistence_data is None:
self.known_path_set = set()
else:
self.known_path_set = set(persistence_data)
logging.getLogger(AMinerConfig.DEBUG_LOG_NAME).debug('%s loaded persistence data.', self.__class__.__name__)
def __init__(self,
aminer_config,
anomaly_event_handlers,
target_path_list=None,
window_size=600,
num_windows=50,
confidence_factor=0.33,
empty_window_warnings=True,
early_exceeding_anomaly_output=False,
set_lower_limit=None,
set_upper_limit=None,
persistence_id='Default',
auto_include_flag=False,
output_log_line=True,
ignore_list=None,
constraint_list=None):
"""
Initialize the detector. This will also trigger reading or creation of persistence storage location.
@param aminer_config configuration from analysis_context.
@param target_path_list parser paths of values to be analyzed. Multiple paths mean that values are analyzed by their combined
occurrences. When no paths are specified, the events given by the full path list are analyzed.
@param anomaly_event_handlers for handling events, e.g., print events to stdout.
@param window_size the length of the time window for counting in seconds.
@param num_windows the number of previous time windows considered for expected frequency estimation.
@param confidence_factor defines range of tolerable deviation of measured frequency from expected frequency according to
occurrences_mean +- occurrences_std / self.confidence_factor. Default value is 0.33 = 3*sigma deviation. confidence_factor
must be in range [0, 1].
@param empty_window_warnings whether anomalies should be generated for too small window sizes.
@param early_exceeding_anomaly_output states if a anomaly should be raised the first time the appearance count exceedes the range.
@param set_lower_limit sets the lower limit of the frequency test to the specified value.
@param set_upper_limit sets the upper limit of the frequency test to the specified value.
@param persistence_id name of persistency document.
@param auto_include_flag specifies whether new frequency measurements override ground truth frequencies.
@param output_log_line specifies whether the full parsed log atom should be provided in the output.
@param ignore_list list of paths that are not considered for analysis, i.e., events that contain one of these paths are
omitted. The default value is [] as None is not iterable.
@param constrain_list list of paths that have to be present in the log atom to be analyzed.
"""
self.target_path_list = target_path_list
self.anomaly_event_handlers = anomaly_event_handlers
self.auto_include_flag = auto_include_flag
self.output_log_line = output_log_line
self.aminer_config = aminer_config
self.next_persist_time = time.time(
) + self.aminer_config.config_properties.get(
KEY_PERSISTENCE_PERIOD, DEFAULT_PERSISTENCE_PERIOD)
self.persistence_id = persistence_id
self.constraint_list = constraint_list
if self.constraint_list is None:
self.constraint_list = []
self.ignore_list = ignore_list
if self.ignore_list is None:
self.ignore_list = []
self.window_size = window_size
self.num_windows = num_windows
if not 0 <= confidence_factor <= 1:
logging.getLogger(DEBUG_LOG_NAME).warning(
'confidence_factor must be in the range [0,1]!')
confidence_factor = 1
self.confidence_factor = confidence_factor
self.empty_window_warnings = empty_window_warnings
self.early_exceeding_anomaly_output = early_exceeding_anomaly_output
self.set_lower_limit = set_lower_limit
self.set_upper_limit = set_upper_limit
self.next_check_time = None
self.counts = {}
self.ranges = {}
self.exceeded_range_frequency = {}
self.log_total = 0
self.log_success = 0
self.log_windows = 0
self.persistence_file_name = build_persistence_file_name(
aminer_config, self.__class__.__name__, persistence_id)
PersistenceUtil.add_persistable_component(self)
# Persisted data contains lists of event-frequency pairs, i.e., [[<ev>, [<freq1, freq2>]], [<ev>, [<freq1, freq2>]], ...]
persistence_data = PersistenceUtil.load_json(
self.persistence_file_name)
if persistence_data is not None:
for entry in persistence_data:
log_event = entry[0]
freqs = entry[1]
# In case that num_windows differ, only take as many as possible
self.counts[tuple(
log_event)] = freqs[max(0,
len(freqs) - num_windows -
1):] + [0]
logging.getLogger(DEBUG_LOG_NAME).debug(
'%s loaded persistence data.', self.__class__.__name__)
def __init__(self,
aminer_config,
target_path_list,
anomaly_event_handlers,
window_size,
min_anomaly_score,
min_variance,
num_windows,
persistence_id='Default',
auto_include_flag=False,
output_log_line=True,
ignore_list=None,
constraint_list=None):
"""
Initialize the detector. This will also trigger reading or creation of persistence storage location.
@param aminer_config configuration from analysis_context.
@param target_path_list parser paths of values to be analyzed. Multiple paths mean that values are analyzed as separate
dimensions. When no paths are specified, the events given by the full path list are analyzed (one dimension).
@param anomaly_event_handlers for handling events, e.g., print events to stdout.
@param window_size the length of the time window for counting in seconds.
@param min_anomaly_score the minimum computed outlier score for reporting anomalies. Scores are scaled by training data, i.e.,
reasonable minimum scores are >1 to detect outliers with respect to currently trained PCA matrix.
@param min_variance the minimum variance covered by the principal components in range [0, 1].
@param num_windows the number of time windows in the sliding window approach. Total covered time span = window_size * num_windows.
@param persistence_id name of persistency document.
@param auto_include_flag specifies whether new count measurements are added to the PCA count matrix.
@param output_log_line specifies whether the full parsed log atom should be provided in the output.
@param ignore_list list of paths that are not considered for analysis, i.e., events that contain one of these paths are
omitted. The default value is [] as None is not iterable.
@param constrain_list list of paths that have to be present in the log atom to be analyzed.
"""
self.target_path_list = target_path_list
self.anomaly_event_handlers = anomaly_event_handlers
self.auto_include_flag = auto_include_flag
self.next_persist_time = None
self.output_log_line = output_log_line
self.aminer_config = aminer_config
self.persistence_id = persistence_id
self.block_time = window_size
self.anomaly_score_threshold = min_anomaly_score
self.variance_threshold = min_variance
if num_windows < 3:
logging.getLogger(AminerConfig.DEBUG_LOG_NAME).warning(
'num_windows must be >= 3!')
self.num_windows = 3
else:
self.num_windows = num_windows
self.first_log = True
self.start_time = 0
self.constraint_list = constraint_list
self.event_count_matrix = []
self.feature_list = []
self.ecm = None
if self.constraint_list is None:
self.constraint_list = []
self.ignore_list = ignore_list
if self.ignore_list is None:
self.ignore_list = []
self.log_total = 0
self.log_success = 0
self.log_windows = 0
self.persistence_file_name = AminerConfig.build_persistence_file_name(
aminer_config, self.__class__.__name__, persistence_id)
PersistenceUtil.add_persistable_component(self)
persistence_data = PersistenceUtil.load_json(
self.persistence_file_name)
if persistence_data is not None:
self.event_count_matrix = list(persistence_data)
self.compute_pca()
# Copy feature list into event count vector and reset counts of each feature
self.event_count_vector = copy.deepcopy(self.event_count_matrix[0])
self.reset_event_count_vector()
else:
if self.target_path_list is None or len(
self.target_path_list) == 0:
# Only one dimension when events are used instead of values; use empty string as placeholder
self.event_count_vector = {'': {}}
else:
self.event_count_vector = {}
def __init__(self,
aminer_config,
anomaly_event_handlers,
event_type_detector,
acf_pause_interval_percentage=0.2,
acf_auto_pause_interval=True,
acf_auto_pause_interval_num_min=10,
build_sum_over_values=False,
num_periods_tsa_ini=15,
num_division_time_step=10,
alpha=0.05,
num_min_time_history=20,
num_max_time_history=30,
num_results_bt=15,
alpha_bt=0.05,
acf_threshold=0.2,
round_time_inteval_threshold=0.02,
force_period_length=False,
set_period_length=604800,
min_log_lines_per_time_step=10,
persistence_id='Default',
path_list=None,
ignore_list=None,
output_log_line=True,
auto_include_flag=True):
"""
Initialize the detector. This will also trigger reading or creation of persistence storage location.
@param aminer_config configuration from analysis_context.
@param anomaly_event_handlers for handling events, e.g., print events to stdout.
@param event_type_detector used to track the number of events in the time windows.
@param acf_pause_interval_percentage states which area of the resutls of the ACF are not used to find the highest peak.
@param acf_auto_pause_interval states if the pause area is automatically set.
If enabled, the variable acf_pause_interval_percentage loses its functionality.
@param acf_auto_pause_interval_num_min states the number of values in which a local minima must be the minimum, to be considered a
local minimum of the function and not an outlier.
@param build_sum_over_values states if the sum of a series of counts is build before applying the TSA.
@param num_periods_tsa_ini number of periods used to initialize the Arima-model.
@param num_division_time_step number of division of the time window to calculate the time step.
@param alpha significance level of the estimated values.
@param num_min_time_history number of lines processed before the period length is calculated.
@param num_max_time_history maximum number of values of the time_history.
@param num_results_bt number of results which are used in the binomial test.
@param alpha_bt significance level for the bt test.
@param round_time_inteval_threshold threshold for the rounding of the time_steps to the times in self.assumed_time_steps.
The higher the threshold the easier the time is rounded to the next time in the list.
@param acf_threshold threshold, which has to be exceeded by the highest peak of the cdf function of the time series, to be analysed.
@param force_period_length states if the period length is calculated through the ACF, or if the period length is forced to
be set to set_period_length.
@param set_period_length states how long the period length is if force_period_length is set to True.
@param min_log_lines_per_time_step states the minimal average number of log lines per time step to make a TSA.
@param persistence_id name of persistency document.
@param path_list At least one of the parser paths in this list needs to appear in the event to be analysed.
@param ignore_list list of paths that are not considered for correlation, i.e., events that contain one of these paths are
omitted. The default value is [] as None is not iterable.
@param output_log_line specifies whether the full parsed log atom should be provided in the output.
@param auto_include_flag specifies whether new frequency measurements override ground truth frequencies.
"""
self.aminer_config = aminer_config
self.next_persist_time = time.time(
) + self.aminer_config.config_properties.get(
KEY_PERSISTENCE_PERIOD, DEFAULT_PERSISTENCE_PERIOD)
self.anomaly_event_handlers = anomaly_event_handlers
self.output_log_line = output_log_line
self.auto_include_flag = auto_include_flag
self.path_list = path_list
if self.path_list is None:
self.path_list = []
self.ignore_list = ignore_list
if self.ignore_list is None:
self.ignore_list = []
self.event_type_detector = event_type_detector
self.acf_pause_interval_percentage = acf_pause_interval_percentage
self.acf_auto_pause_interval = acf_auto_pause_interval
self.acf_auto_pause_interval_num_min = acf_auto_pause_interval_num_min
self.build_sum_over_values = build_sum_over_values
self.num_periods_tsa_ini = num_periods_tsa_ini
self.num_division_time_step = num_division_time_step
self.alpha = alpha
self.num_min_time_history = num_min_time_history
self.num_max_time_history = num_max_time_history
self.num_results_bt = num_results_bt
self.alpha_bt = alpha_bt
self.round_time_inteval_threshold = round_time_inteval_threshold
self.acf_threshold = acf_threshold
self.force_period_length = force_period_length
self.set_period_length = set_period_length
self.min_log_lines_per_time_step = min_log_lines_per_time_step
# Add the TSAArimaDetector-module to the list of the modules, which use the event_type_detector.
self.event_type_detector.add_following_modules(self)
# History of the time windows
self.time_window_history = []
# List of the the single arima_models (statsmodels)
self.arima_models = []
# List of the observed values and the predictions of the TSAArima
self.prediction_history = []
# List of the times of the observations
self.time_history = []
# List of the the results if th value was in the limits of the one step predictions
self.result_list = []
# Minimal number of successes for the binomial test
self.bt_min_suc = self.bt_min_successes(self.num_results_bt,
self.alpha, self.alpha_bt)
# Assumed occuring time steps in seconds. 1 minute: 60, 1 hour: 3600, 12 hours: 43200, 1 day: 86400, 1 week: 604800.
self.assumed_time_steps = [60, 3600, 43200, 86400, 604800]
# Load the persistence
self.persistence_id = persistence_id
self.persistence_file_name = AminerConfig.build_persistence_file_name(
aminer_config, self.__class__.__name__, persistence_id)
PersistenceUtil.add_persistable_component(self)
persistence_data = PersistenceUtil.load_json(
self.persistence_file_name)
# Import the persistence
if persistence_data is not None:
self.time_window_history = persistence_data[0]
self.arima_models = [None for _ in self.time_window_history]
# skipcq: PTC-W0060
for event_index in range(len(self.arima_models)):
if len(
self.time_window_history[event_index]
) >= self.num_periods_tsa_ini * self.num_division_time_step:
try:
if not self.build_sum_over_values:
model = statsmodels.tsa.arima.model.ARIMA(
self.time_window_history[event_index]
[-self.num_periods_tsa_ini *
self.num_division_time_step:],
order=(self.num_division_time_step, 0, 0),
seasonal_order=(0, 0, 0,
self.num_division_time_step))
self.arima_models[event_index] = model.fit()
else:
model = statsmodels.tsa.arima.model.ARIMA(
[
sum(self.time_window_history[event_index]
[-self.num_periods_tsa_ini *
self.num_division_time_step +
i:-(self.num_periods_tsa_ini - 1) *
self.num_division_time_step + i])
for i in range(
(self.num_periods_tsa_ini - 1) *
self.num_division_time_step)
] + [
sum(self.time_window_history[event_index]
[-self.num_division_time_step:])
],
order=(self.num_division_time_step, 0, 0),
seasonal_order=(0, 0, 0,
self.num_division_time_step))
self.arima_models[event_index] = model.fit()
except: # skipcq FLK-E722
self.arima_models[event_index] = None
self.time_window_history[event_index] = []
else:
self.arima_models[event_index] = None
self.time_window_history[event_index] = []
self.prediction_history = persistence_data[1]
self.time_history = persistence_data[2]
self.result_list = persistence_data[3]
# List of the pauses of the tests to the event numbers. If an arima model was initialized with the persistency, the model must
# be trained before it can be used for forecasts. An integer states how many tests should be skipped before the next
# output to this event number. None if no model was initialized for this event number.
self.test_pause = [
self.num_division_time_step
if arima_models_statsmodel is not None else None
for arima_models_statsmodel in self.arima_models
]
# If all entries are None set the variable to None
if all(entry is None for entry in self.test_pause):
self.test_pause = None
else:
self.test_pause = None
def __init__(self, aminer_config, anomaly_event_handlers, event_type_detector, persistence_id='Default', target_path_list=None,
output_log_line=True, auto_include_flag=False, num_init=50, force_period_length=False, set_period_length=10, alpha=0.05,
alpha_bt=0.05, num_results_bt=15, num_min_time_history=20, num_max_time_history=30, num_periods_tsa_ini=20):
"""
Initialize the detector. This will also trigger reading or creation of persistence storage location.
@param aminer_config configuration from analysis_context.
@param anomaly_event_handlers for handling events, e.g., print events to stdout.
@param event_type_detector used to track the number of events in the time windows.
@param persistence_id name of persistency document.
@param target_path_list parser paths of values to be analyzed. Multiple paths mean that values are analyzed by their combined
occurrences. When no paths are specified, the events given by the full path list are analyzed.
@param output_log_line specifies whether the full parsed log atom should be provided in the output.
@param auto_include_flag specifies whether new frequency measurements override ground truth frequencies.
@param num_init number of lines processed before the period length is calculated.
@param force_period_length states if the period length is calculated through the ACF, or if the period length is forced to
be set to set_period_length.
@param set_period_length states how long the period length is if force_period_length is set to True.
@param alpha significance level of the estimated values.
@param alpha_bt significance level for the bt test.
@param num_results_bt number of results which are used in the binomial test.
@param num_min_time_history number of lines processed before the period length is calculated.
@param num_max_time_history maximum number of values of the time_history.
@param num_periods_tsa_ini number of periods used to initialize the Arima-model.
"""
self.aminer_config = aminer_config
self.anomaly_event_handlers = anomaly_event_handlers
self.event_type_detector = event_type_detector
# Add the PathArimaDetector to the list of the modules, which use the event_type_detector.
self.event_type_detector.add_following_modules(self)
self.persistence_id = persistence_id
self.target_path_list = target_path_list
if self.target_path_list is None:
self.target_path_list = []
self.output_log_line = output_log_line
self.auto_include_flag = auto_include_flag
self.num_init = num_init
self.force_period_length = force_period_length
self.set_period_length = set_period_length
self.alpha = alpha
self.alpha_bt = alpha_bt
self.num_results_bt = num_results_bt
self.num_min_time_history = num_min_time_history
self.num_max_time_history = num_max_time_history
self.num_periods_tsa_ini = num_periods_tsa_ini
# Test if the ETD saves the values
if not self.event_type_detector.save_values:
msg = 'Changed the parameter save_values of the VTD from False to True to properly use the PathArimaDetector'
logging.getLogger(DEBUG_LOG_NAME).warning(msg)
print('WARNING: ' + msg, file=sys.stderr)
self.event_type_detector.save_values = True
# Test if the ETD saves enough values
if self.event_type_detector.min_num_vals < self.num_periods_tsa_ini * int(self.num_init/2):
msg = 'Changed the parameter min_num_vals of the ETD from %s to %s to properly use the PathArimaDetector' % (
self.event_type_detector.min_num_vals, self.num_periods_tsa_ini * int(self.num_init/2))
logging.getLogger(DEBUG_LOG_NAME).warning(msg)
print('WARNING: ' + msg, file=sys.stderr)
self.event_type_detector.min_num_vals = self.num_periods_tsa_ini * int(self.num_init/2)
# Test if the ETD saves enough values
if self.event_type_detector.max_num_vals < self.num_periods_tsa_ini * int(self.num_init/2) + 500:
msg = 'Changed the parameter max_num_vals of the ETD from %s to %s to use pregenerated critical values for the gof-test' % (
self.event_type_detector.max_num_vals, self.num_periods_tsa_ini * int(self.num_init/2) + 500)
logging.getLogger(DEBUG_LOG_NAME).warning(msg)
print('WARNING: ' + msg, file=sys.stderr)
self.event_type_detector.max_num_vals = self.num_periods_tsa_ini * int(self.num_init/2) + 500
self.next_persist_time = time.time() + self.aminer_config.config_properties.get(KEY_PERSISTENCE_PERIOD, DEFAULT_PERSISTENCE_PERIOD)
# List of the indices of the target_paths in the ETD
self.target_path_index_list = []
# List of the period_lengths
self.period_length_list = []
# List of the the single arima_models (statsmodels)
self.arima_models = []
# List of the observed values and the predictions of the TSAArima
self.prediction_history = []
# List of the the results if th value was in the limits of the one step predictions
self.result_list = []
# Minimal number of successes for the binomial test in the last num_results_bt results
self.bt_min_suc = self.bt_min_successes(self.num_results_bt, self.alpha, self.alpha_bt)
# Loads the persistence
self.persistence_file_name = AminerConfig.build_persistence_file_name(aminer_config, self.__class__.__name__, persistence_id)
PersistenceUtil.add_persistable_component(self)
self.load_persistence_data()
def __init__(self,
aminer_config,
anomaly_event_handlers,
path_list=None,
id_path_list=None,
ignore_list=None,
allow_missing_id=False,
num_log_lines_solidify_matrix=100,
time_output_threshold=0,
anomaly_threshold=0.05,
persistence_id='Default',
auto_include_flag=False,
output_log_line=True):
"""
Initialize the detector. This will also trigger reading or creation of persistence storage location.
@param aminer_config configuration from analysis_context.
@param anomaly_event_handlers for handling events, e.g., print events to stdout.
@param path_list parser paths of values to be analyzed. Multiple paths mean that values are analyzed by their combined
occurrences. When no paths are specified, the events given by the full path list are analyzed.
@param id_path_list the list of paths where id values can be stored in all relevant log event types.
@param ignore_list list of paths that are not considered for analysis, i.e., events that contain one of these paths are
omitted. The default value is [] as None is not iterable.
@param allow_missing_id when set to True, the detector will also use matches, where one of the pathes from target_path_list
does not refer to an existing parsed data object.
@param num_log_lines_solidify_matrix number of processed log lines after which the matrix is solidified.
This process is periodically repeated.
@param time_output_threshold threshold for the tested minimal transition time which has to be exceeded to be tested.
@param anomaly_threshold threshold for the confidence which must be exceeded to raise an anomaly.
@param persistence_id name of persistency document.
@param auto_include_flag specifies whether newly observed sequences should be added to the learned model
@param output_log_line specifies whether the full parsed log atom should be provided in the output.
"""
# Input parameters
self.aminer_config = aminer_config
self.anomaly_event_handlers = anomaly_event_handlers
self.path_list = path_list
if self.path_list is None:
self.path_list = []
self.id_path_list = id_path_list
if self.id_path_list is None:
self.id_path_list = []
self.ignore_list = ignore_list
if self.ignore_list is None:
self.ignore_list = []
self.allow_missing_id = allow_missing_id
self.num_log_lines_solidify_matrix = num_log_lines_solidify_matrix
self.time_output_threshold = time_output_threshold
self.anomaly_threshold = anomaly_threshold
self.persistence_id = persistence_id
self.auto_include_flag = auto_include_flag
self.output_log_line = output_log_line
self.next_persist_time = time.time(
) + self.aminer_config.config_properties.get(
KEY_PERSISTENCE_PERIOD, DEFAULT_PERSISTENCE_PERIOD)
# Test if both path_list and id_path_list are not empty
if [] in (self.path_list, self.id_path_list):
msg = 'Both paths and id_path_list must not be empty.'
logging.getLogger(DEBUG_LOG_NAME).warning(msg)
print('WARNING: ' + msg, file=sys.stderr)
# Initialization auxiliary variables
self.time_matrix = {}
self.last_value = {}
self.last_time = {}
self.log_total = 0
# Load persistency
self.persistence_file_name = build_persistence_file_name(
aminer_config, self.__class__.__name__, persistence_id)
PersistenceUtil.add_persistable_component(self)
persistence_data = PersistenceUtil.load_json(
self.persistence_file_name)
if persistence_data is not None:
return_matrix = persistence_data[0]
keys_1 = [tuple(key) for key in persistence_data[1]]
keys_2 = [[tuple(key) for key in persistence_data[2][i]]
for i in range(len(persistence_data[2]))]
self.time_matrix = {
keys_1[i]: {
keys_2[i][j]: return_matrix[i][j]
for j in range(len(keys_2[i]))
}
for i in range(len(keys_1))
}
def __init__(self,
aminer_config,
anomaly_event_handlers,
persistence_id='Default',
path_list=None,
id_path_list=None,
allow_missing_id=False,
allowed_id_tuples=None,
min_num_vals=1000,
max_num_vals=1500,
save_values=True,
track_time_for_tsa=False,
waiting_time_for_tsa=1000,
num_sections_waiting_time_for_tsa=100):
"""Initialize the detector. This will also trigger reading or creation of persistence storage location."""
self.anomaly_event_handlers = anomaly_event_handlers
# one or more paths that specify the trace of the sequence detection, i.e., incorrect sequences that are generated by interleaved
# events can be avoided when event sequence identifiers are available (list of strings, defaults to empty list).
self.id_path_list = id_path_list
if self.id_path_list is None:
self.id_path_list = []
# Specifies whether log atoms without id path should be omitted (only if id path is set).
self.allow_missing_id = allow_missing_id
# List of the allowed id tuples. Log atoms with id tuples not in this list are not analyzed, when this list is not empty.
if allowed_id_tuples is None:
self.allowed_id_tuples = []
else:
self.allowed_id_tuples = [
tuple(tuple_list) for tuple_list in allowed_id_tuples
]
# Number of the values which the list is being reduced to.
self.min_num_vals = min_num_vals
# Maximum number of lines in the value list before it is reduced. > min_num_vals.
self.max_num_vals = max_num_vals
# If False the values of the Token are not saved for further analysis. Disables self.values, and self.check_variables
self.save_values = save_values
# States if the time windows should be tracked for the time series analysis
self.track_time_for_tsa = track_time_for_tsa
# Time in seconds, until the time windows are being initialized
self.waiting_time_for_tsa = waiting_time_for_tsa
# Number of sections of the initialization window. The length of the input-list of the calculate_time_steps is this number
self.num_sections_waiting_time_for_tsa = num_sections_waiting_time_for_tsa
self.aminer_config = aminer_config
self.next_persist_time = time.time(
) + self.aminer_config.config_properties.get(
KEY_PERSISTENCE_PERIOD, DEFAULT_PERSISTENCE_PERIOD)
self.num_events = 0
# List of the longest path of the events
self.longest_path = []
# List of the keys corresponding to the events
self.found_keys = []
# List of the keys, which take values in the log-line
self.variable_key_list = []
# List of the values of the log-lines. If the lenght reaches max_num_vals the list gets reduced to min_num_vals values per variable
self.values = []
# Saves the number of lines of the event types
self.num_eventlines = []
# Saves the number of total log-lines
self.total_records = 0
# List of the modules which follow the event_type_detector. The implemented modules are form the list
# [variableTypeDetector, variableCorrelationDetector]
self.following_modules = []
# List of paths, which variables are being tracked. All other paths will not get tracked. If None all paths are being tracked.
self.path_list = path_list
# List of bools, which state if the variables of variable_key_list are updated.
self.check_variables = []
# List ot the time trigger. The first list states the times when something should be triggered, the second list states the indices
# of the eventtyps, or a list of the evnettype, a path and a value which should be counted (-1 for an initialization)
# the third list states, the length of the time step (-1 for a one time trigger)
self.etd_time_trigger = [[], [], []]
# Reference containing the number of lines of the events for the TSA
self.num_eventlines_tsa_ref = []
# Index of the eventtype of the current log line
self.current_index = 0
# List of the id tuples
self.id_path_list_tuples = []
# Loads the persistence
self.persistence_file_name = build_persistence_file_name(
aminer_config, self.__class__.__name__, persistence_id)
PersistenceUtil.add_persistable_component(self)
persistence_data = PersistenceUtil.load_json(
self.persistence_file_name)
# Imports the persistence
if persistence_data is not None:
for key in persistence_data[0]:
self.found_keys.append(set(key))
self.variable_key_list = persistence_data[1]
self.values = persistence_data[2]
self.longest_path = persistence_data[3]
self.check_variables = persistence_data[4]
self.num_eventlines = persistence_data[5]
self.etd_time_trigger = persistence_data[6]
self.num_eventlines_tsa_ref = persistence_data[7]
self.id_path_list_tuples = [
tuple(tuple_list) for tuple_list in persistence_data[8]
]
self.num_events = len(self.found_keys)
else:
if self.track_time_for_tsa:
self.etd_time_trigger[0].append(-1)
self.etd_time_trigger[1].append(-1)
self.etd_time_trigger[2].append(-1)
def __init__(self,
aminer_config,
anomaly_event_handlers,
persistence_id='Default',
path_list=None,
min_num_vals=1000,
max_num_vals=1500,
save_values=True,
track_time_for_TSA=False,
waiting_time_for_TSA=300,
num_sections_waiting_time_for_TSA=10):
"""Initialize the detector. This will also trigger reading or creation of persistence storage location."""
self.next_persist_time = time.time() + 600.0
self.anomaly_event_handlers = anomaly_event_handlers
self.num_events = 0
# List of the longest path of the events
self.longest_path = []
# List of the keys corresponding to the events
self.found_keys = []
# List of the keys, which take values in the log-line
self.variable_key_list = []
# List of the values of the log-lines. If the lenght reaches max_num_vals the list gets reduced to min_num_vals values per variable
self.values = []
# Saves the number of lines of the event types
self.num_eventlines = []
# Saves the number of total log-lines
self.total_records = 0
# List of the modules which follow the event_type_detector. The implemented modules are form the list
# [variableTypeDetector, variableCorrelationDetector]
self.following_modules = []
# List of paths, which variables are being tracked. All other paths will not get tracked. If None all paths are being tracked.
self.path_list = path_list
# List of bools, which state if the variables of variable_key_list are updated.
self.check_variables = []
# List ot the time trigger. The first list states the times when something should be triggered, the second list states the indices
# of the eventtyps, or a list of the evnettype, a path and a value which should be counted (-1 for an initialization)
# the third list states, the length of the time window (-1 for a one time trigger)
self.etd_time_trigger = [[], [], []]
# Reference containing the number of lines of the events for the TSA
self.num_eventlines_TSA_ref = []
# Index of the eventtype of the current log line
self.current_index = 0
# Number of the values which the list is being reduced to. Be cautious that this is higher than 'num_min_values'
# in VarTypeD/Cor!!!
self.min_num_vals = min_num_vals
# Maximum number of lines in the value list before it is reduced. > min_num_vals.
self.max_num_vals = max_num_vals
# If False the values of the Token are not saved for further analysis. Disables self.values, and self.check_variables
self.save_values = save_values
# States if the time windows should be tracked for the time series analysis
self.track_time_for_TSA = track_time_for_TSA
# Time in seconds, until the time windows are being initialized
self.waiting_time_for_TSA = waiting_time_for_TSA
# Number of subdivisions of the initialization window. The length of the input-list of the function_Init-funtion is numSubd+1
self.num_sections_waiting_time_for_TSA = num_sections_waiting_time_for_TSA
self.aminer_config = aminer_config
# Loads the persistence
self.persistence_file_name = AminerConfig.build_persistence_file_name(
aminer_config, self.__class__.__name__, persistence_id)
PersistenceUtil.add_persistable_component(self)
persistence_data = PersistenceUtil.load_json(
self.persistence_file_name)
# Imports the persistence
if persistence_data is not None:
for key in persistence_data[0]:
self.found_keys.append(set(key))
self.variable_key_list = persistence_data[1]
self.values = persistence_data[2]
self.longest_path = persistence_data[3]
self.check_variables = persistence_data[4]
self.num_eventlines = persistence_data[5]
self.etd_time_trigger = persistence_data[6]
self.num_eventlines_TSA_ref = persistence_data[7]
self.num_events = len(self.found_keys)
else:
if self.track_time_for_TSA:
self.etd_time_trigger[0].append(-1)
self.etd_time_trigger[1].append(-1)
self.etd_time_trigger[2].append(-1)