def main():
spec = dict(
commands=dict(type='list', required=True),
wait_for=dict(type='list'),
retries=dict(default=10, type='int'),
interval=dict(default=1, type='int')
)
module = NetworkModule(argument_spec=spec,
connect_on_load=False,
supports_check_mode=True)
commands = module.params['commands']
conditionals = module.params['wait_for'] or list()
warnings = list()
runner = CommandRunner(module)
for cmd in commands:
if module.check_mode and not cmd.startswith('show'):
warnings.append('only show commands are supported when using '
'check mode, not executing `%s`' % cmd)
else:
if cmd.startswith('conf'):
module.fail_json(msg='dellos10_command does not support running '
'config mode commands. Please use '
'dellos10_config instead')
runner.add_command(cmd)
for item in conditionals:
runner.add_conditional(item)
runner.retries = module.params['retries']
runner.interval = module.params['interval']
try:
runner.run()
except FailedConditionsError:
exc = get_exception()
module.fail_json(msg=str(exc), failed_conditions=exc.failed_conditions)
except NetworkError:
exc = get_exception()
module.fail_json(msg=str(exc))
result = dict(changed=False)
result['stdout'] = list()
for cmd in commands:
try:
output = runner.get_command(cmd)
except ValueError:
output = 'command not executed due to check_mode, see warnings'
result['stdout'].append(output)
result['warnings'] = warnings
result['stdout_lines'] = list(to_lines(result['stdout']))
module.exit_json(**result)
def main():
spec = dict(
# { command: <str>, prompt: <str>, response: <str> }
commands=dict(type='list', required=True),
wait_for=dict(type='list'),
retries=dict(default=10, type='int'),
interval=dict(default=1, type='int'))
module = NetworkModule(argument_spec=spec,
connect_on_load=False,
supports_check_mode=True)
commands = list(parse_commands(module))
conditionals = module.params['wait_for'] or list()
warnings = list()
runner = CommandRunner(module)
for cmd in commands:
if module.check_mode and not cmd['command'].startswith('show'):
warnings.append('only show commands are supported when using '
'check mode, not executing `%s`' % cmd)
else:
if cmd['command'].startswith('conf'):
module.fail_json(
msg='dellos9_command does not support running '
'config mode commands. Please use '
'dellos9_config instead')
runner.add_command(**cmd)
for item in conditionals:
runner.add_conditional(item)
runner.retries = module.params['retries']
runner.interval = module.params['interval']
try:
runner.run()
except FailedConditionsError:
exc = get_exception()
module.fail_json(msg=str(exc), failed_conditions=exc.failed_conditions)
except NetworkError:
exc = get_exception()
module.fail_json(msg=str(exc))
result = dict(changed=False)
result['stdout'] = list()
for cmd in commands:
try:
output = runner.get_command(cmd['command'])
except ValueError:
output = 'command not executed due to check_mode, see warnings'
result['stdout'].append(output)
result['warnings'] = warnings
result['stdout_lines'] = list(to_lines(result['stdout']))
module.exit_json(**result)
def excute_command(self, commands):
""" excute_command"""
output = ''
runner = CommandRunner(self.module)
for cmd in commands:
try:
runner.add_command(**cmd)
except AddCommandError:
self.module.fail_json(msg='duplicate command detected: %s' %
cmd)
try:
runner.run()
except FailedConditionsError:
exc = get_exception()
self.module.fail_json(msg=get_cli_exception(exc),
failed_conditions=exc.failed_conditions)
except FailedConditionalError:
exc = get_exception()
self.module.fail_json(msg=get_cli_exception(exc),
failed_conditional=exc.failed_conditional)
except NetworkError:
exc = get_exception()
self.module.fail_json(msg=get_cli_exception(exc))
for cmd in commands:
try:
output = runner.get_command(cmd['command'], cmd.get('output'))
except ValueError:
self.module.fail_json(
msg='command not executed due to check_mode, see warnings')
return output
def excute_command(self, commands):
""" excute_command"""
runner = CommandRunner(self.module)
for cmd in commands:
try:
runner.add_command(**cmd)
except AddCommandError:
exc = get_exception()
self.module.fail_json(msg=get_cli_exception(exc))
try:
runner.run()
except NetworkError:
err = get_cli_exception()
self.module.fail_json(msg=err)
def excute_command(self, commands):
""" Method to execute command """
runner = CommandRunner(self.module)
for cmd in commands:
try:
runner.add_command(**cmd)
except AddCommandError:
exc = get_exception()
self.module.fail_json(msg=str(exc))
try:
runner.run()
except NetworkError:
err = get_cli_exception()
self.module.fail_json(msg=err)
output = []
for cmd in commands:
tmp = runner.get_command(cmd['command'], cmd.get('output'))
output.append(tmp)
return output
def excute_command(self, commands):
""" excute_command"""
runner = CommandRunner(self.module)
for cmd in commands:
try:
runner.add_command(**cmd)
except AddCommandError:
exc = get_exception()
self.module.fail_json(
msg='duplicate command detected: %s' % cmd)
runner.retries = self.module.params['retries']
runner.interval = self.module.params['interval']
runner.match = self.module.params['match']
try:
runner.run()
except FailedConditionsError:
exc = get_exception()
self.module.fail_json(
msg=str(exc), failed_conditions=exc.failed_conditions)
except FailedConditionalError:
exc = get_exception()
self.module.fail_json(
msg=str(exc), failed_conditional=exc.failed_conditional)
except NetworkError:
exc = get_exception()
self.module.fail_json(msg=str(exc), **exc.kwargs)
for cmd in commands:
try:
output = runner.get_command(cmd['command'], cmd.get('output'))
except ValueError:
self.module.fail_json(
msg='command not executed due to check_mode, see warnings')
return output
def main():
"""main entry point for Ansible module
"""
spec = dict(
commands=dict(type='list'),
rpcs=dict(type='list'),
display=dict(default='xml', choices=['text', 'xml'],
aliases=['format', 'output']),
wait_for=dict(type='list', aliases=['waitfor']),
match=dict(default='all', choices=['all', 'any']),
retries=dict(default=10, type='int'),
interval=dict(default=1, type='int'),
transport=dict(default='netconf', choices=['netconf'])
)
mutually_exclusive = [('commands', 'rpcs')]
module = NetworkModule(argument_spec=spec,
mutually_exclusive=mutually_exclusive,
supports_check_mode=True)
commands = list()
for key in VALID_KEYS.keys():
commands.extend(list(parse(module, key)))
conditionals = module.params['wait_for'] or list()
warnings = list()
runner = CommandRunner(module)
for cmd in commands:
if module.check_mode and not cmd['command'].startswith('show'):
warnings.append('only show commands are supported when using '
'check mode, not executing `%s`' % cmd['command'])
else:
if cmd['command'].startswith('co'):
module.fail_json(msg='junos_command does not support running '
'config mode commands. Please use '
'junos_config instead')
try:
runner.add_command(**cmd)
except AddCommandError:
exc = get_exception()
warnings.append('duplicate command detected: %s' % cmd)
try:
for item in conditionals:
runner.add_conditional(item)
except (ValueError, AddConditionError):
exc = get_exception()
module.fail_json(msg=str(exc), condition=exc.condition)
runner.retries = module.params['retries']
runner.interval = module.params['interval']
runner.match = module.params['match']
try:
runner.run()
except FailedConditionsError:
exc = get_exception()
module.fail_json(msg=str(exc), failed_conditions=exc.failed_conditions)
except FailedConditionalError:
exc = get_exception()
module.fail_json(msg=str(exc), failed_conditional=exc.failed_conditional)
except NetworkError:
exc = get_exception()
module.fail_json(msg=str(exc))
result = dict(changed=False, stdout=list())
for cmd in commands:
try:
output = runner.get_command(cmd['command'], cmd.get('output'))
except ValueError:
output = 'command not executed due to check_mode, see warnings'
result['stdout'].append(output)
result['warnings'] = warnings
result['stdout_lines'] = list(to_lines(result['stdout']))
module.exit_json(**result)
def main():
spec = dict(
# { command: <str>, output: <str>, prompt: <str>, response: <str> }
commands=dict(type='list', required=True),
wait_for=dict(type='list', aliases=['waitfor']),
match=dict(default='all', choices=['any', 'all']),
retries=dict(default=10, type='int'),
interval=dict(default=1, type='int')
)
module = NetworkModule(argument_spec=spec,
supports_check_mode=True)
commands = list(parse_commands(module))
conditionals = module.params['wait_for'] or list()
warnings = list()
runner = CommandRunner(module)
try:
# This tries to detect command mode.
runner.add_command('tmsh')
runner.run()
shell = "bash"
except NetworkError:
shell = "tmsh"
# Resets the runner because raised exceptions do not remove the
# erroneous commands
module.disconnect()
runner.commands = []
runner.module.cli._commands = []
for cmd in commands:
cmd = strip_tmsh_prefix(cmd)
if module.check_mode and not is_config_mode_command(cmd):
warnings.append('only show or list commands are supported when '
'using check mode, not executing `%s`'
% cmd['command'])
else:
if is_config_mode_command(cmd):
module.fail_json(msg='bigip_command does not support running '
'config mode commands. Please use '
'bigip_config instead')
try:
if shell == 'tmsh':
disable_pager = dict(
output=None,
command='modify cli preference pager disabled'
)
runner.add_command(**disable_pager)
runner.add_command(**cmd)
else:
disable_pager = dict(
output=None,
command='tmsh modify cli preference pager disabled'
)
cmd['command'] = 'tmsh ' + cmd['command']
runner.add_command(**disable_pager)
runner.add_command(**cmd)
except AddCommandError:
warnings.append('Duplicate command detected: %s' % cmd)
try:
for item in conditionals:
runner.add_conditional(item)
except AddConditionError:
exc = get_exception()
module.fail_json(msg=str(exc), condition=exc.condition)
runner.retries = module.params['retries']
runner.interval = module.params['interval']
runner.match = module.params['match']
try:
runner.run()
except FailedConditionsError:
exc = get_exception()
module.fail_json(msg=str(exc), failed_conditions=exc.failed_conditions)
except FailedConditionalError:
exc = get_exception()
module.fail_json(msg=str(exc), failed_conditional=exc.failed_conditional)
except NetworkError:
exc = get_exception()
module.fail_json(msg=str(exc), **exc.kwargs)
result = dict(changed=False)
result['stdout'] = list()
for cmd in commands:
try:
output = runner.get_command(cmd['command'], cmd.get('output'))
except ValueError:
output = 'command not executed due to check_mode, see warnings'
result['stdout'].append(output)
result['warnings'] = warnings
result['stdout_lines'] = list(to_lines(result['stdout']))
module.exit_json(**result)
def main():
spec = dict(
# { command: <str>, output: <str>, prompt: <str>, response: <str> }
commands=dict(type='list', required=True),
wait_for=dict(type='list', aliases=['waitfor']),
match=dict(default='all', choices=['all', 'any']),
retries=dict(default=10, type='int'),
interval=dict(default=1, type='int')
)
module = NetworkModule(argument_spec=spec,
supports_check_mode=True)
commands = list(parse_commands(module))
conditionals = module.params['wait_for'] or list()
warnings = list()
runner = CommandRunner(module)
for cmd in commands:
if module.check_mode and not cmd['command'].startswith('show'):
warnings.append('only show commands are supported when using '
'check mode, not executing `%s`' % cmd['command'])
else:
if cmd['command'].startswith('conf'):
module.fail_json(msg='eos_command does not support running '
'config mode commands. Please use '
'eos_config instead')
try:
runner.add_command(**cmd)
except AddCommandError:
exc = get_exception()
warnings.append('duplicate command detected: %s' % cmd)
try:
for item in conditionals:
runner.add_conditional(item)
except AddConditionError:
exc = get_exception()
module.fail_json(msg=str(exc), condition=exc.condition)
runner.retries = module.params['retries']
runner.interval = module.params['interval']
runner.match = module.params['match']
try:
runner.run()
except FailedConditionsError:
exc = get_exception()
module.fail_json(msg=str(exc), failed_conditions=exc.failed_conditions)
except FailedConditionalError:
exc = get_exception()
module.fail_json(msg=str(exc), failed_conditional=exc.failed_conditional)
except NetworkError:
exc = get_exception()
module.fail_json(msg=str(exc), **exc.kwargs)
result = dict(changed=False, stdout=list())
for cmd in commands:
try:
output = runner.get_command(cmd['command'], cmd.get('output'))
except ValueError:
output = 'command not executed due to check_mode, see warnings'
result['stdout'].append(output)
result['warnings'] = warnings
result['stdout_lines'] = list(to_lines(result['stdout']))
module.exit_json(**result)
def main():
"""main entry point for Ansible module
"""
spec = dict(
commands=dict(type="list"),
rpcs=dict(type="list"),
display=dict(default="xml", choices=["text", "xml"], aliases=["format", "output"]),
wait_for=dict(type="list", aliases=["waitfor"]),
match=dict(default="all", choices=["all", "any"]),
retries=dict(default=10, type="int"),
interval=dict(default=1, type="int"),
transport=dict(default="netconf", choices=["netconf"]),
)
mutually_exclusive = [("commands", "rpcs")]
module = NetworkModule(argument_spec=spec, mutually_exclusive=mutually_exclusive, supports_check_mode=True)
commands = list()
for key in VALID_KEYS.keys():
commands.extend(list(parse(module, key)))
conditionals = module.params["wait_for"] or list()
warnings = list()
runner = CommandRunner(module)
for cmd in commands:
if module.check_mode and not cmd["command"].startswith("show"):
warnings.append(
"only show commands are supported when using " "check mode, not executing `%s`" % cmd["command"]
)
else:
if cmd["command"].startswith("co"):
module.fail_json(
msg="junos_command does not support running "
"config mode commands. Please use "
"junos_config instead"
)
try:
runner.add_command(**cmd)
except AddCommandError:
exc = get_exception()
warnings.append("duplicate command detected: %s" % cmd)
try:
for item in conditionals:
runner.add_conditional(item)
except (ValueError, AddConditionError):
exc = get_exception()
module.fail_json(msg=str(exc), condition=exc.condition)
runner.retries = module.params["retries"]
runner.interval = module.params["interval"]
runner.match = module.params["match"]
try:
runner.run()
except FailedConditionsError:
exc = get_exception()
module.fail_json(msg=str(exc), failed_conditions=exc.failed_conditions)
except FailedConditionalError:
exc = get_exception()
module.fail_json(msg=str(exc), failed_conditional=exc.failed_conditional)
except NetworkError:
exc = get_exception()
module.fail_json(msg=str(exc))
result = dict(changed=False, stdout=list())
for cmd in commands:
try:
output = runner.get_command(cmd["command"], cmd.get("output"))
except ValueError:
output = "command not executed due to check_mode, see warnings"
result["stdout"].append(output)
result["warnings"] = warnings
result["stdout_lines"] = list(to_lines(result["stdout"]))
module.exit_json(**result)
def main():
""" main """
spec = dict(commands=dict(type='list', required=True),
wait_for=dict(type='list', aliases=['waitfor']),
match=dict(default='all', choices=['any', 'all']),
retries=dict(default=10, type='int'),
interval=dict(default=1, type='int'))
module = NetworkModule(argument_spec=spec, supports_check_mode=True)
commands = list(parse_commands(module))
conditionals = module.params['wait_for'] or list()
warnings = list()
runner = CommandRunner(module)
for cmd in commands:
if module.check_mode and not cmd['command'].startswith('dis'):
warnings.append('only display commands are supported when using '
'check mode, not executing `%s`' % cmd['command'])
else:
if cmd['command'].startswith('sys'):
module.fail_json(msg='ce_command does not support running '
'config mode commands. Please use '
'ce_config instead')
try:
runner.add_command(**cmd)
except AddCommandError:
exc = get_exception()
warnings.append('duplicate command detected: %s' % cmd)
try:
for item in conditionals:
runner.add_conditional(item)
except AddConditionError:
exc = get_exception()
module.fail_json(msg=str(exc), condition=exc.condition)
runner.retries = module.params['retries']
runner.interval = module.params['interval']
runner.match = module.params['match']
try:
runner.run()
except FailedConditionsError:
exc = get_exception()
module.fail_json(msg=str(exc), failed_conditions=exc.failed_conditions)
except FailedConditionalError:
exc = get_exception()
module.fail_json(msg=str(exc),
failed_conditional=exc.failed_conditional)
except NetworkError:
exc = get_exception()
module.fail_json(msg=str(exc), **exc.kwargs)
result = dict(changed=False)
result['stdout'] = list()
for cmd in commands:
try:
output = runner.get_command(cmd['command'], cmd.get('output'))
except ValueError:
output = 'command not executed due to check_mode, see warnings'
result['stdout'].append(output)
result['warnings'] = warnings
result['stdout_lines'] = list(to_lines(result['stdout']))
module.exit_json(**result)
def main():
spec = dict(
# { command: <str>, output: <str>, prompt: <str>, response: <str> }
commands=dict(type='list', required=True),
wait_for=dict(type='list', aliases=['waitfor']),
match=dict(default='all', choices=['any', 'all']),
retries=dict(default=10, type='int'),
interval=dict(default=1, type='int')
)
module = NetworkModule(argument_spec=spec,
supports_check_mode=True)
commands = list(parse_commands(module))
conditionals = module.params['wait_for'] or list()
warnings = list()
runner = CommandRunner(module)
try:
# This tries to detect command mode.
runner.add_command('tmsh')
runner.run()
shell = "bash"
except NetworkError:
shell = "tmsh"
# Resets the runner because raised exceptions do not remove the
# erroneous commands
module.disconnect()
runner.commands = []
runner.module.cli._commands = []
for cmd in commands:
cmd = strip_tmsh_prefix(cmd)
if module.check_mode and not is_config_mode_command(cmd):
warnings.append('only show or list commands are supported when '
'using check mode, not executing `%s`'
% cmd['command'])
else:
if is_config_mode_command(cmd):
module.fail_json(msg='bigip_command does not support running '
'config mode commands. Please use '
'bigip_config instead')
try:
if shell == 'tmsh':
disable_pager = dict(
output=None,
command='modify cli preference pager disabled'
)
runner.add_command(**disable_pager)
runner.add_command(**cmd)
else:
disable_pager = dict(
output=None,
command='tmsh modify cli preference pager disabled'
)
cmd['command'] = 'tmsh ' + cmd['command']
runner.add_command(**disable_pager)
runner.add_command(**cmd)
except AddCommandError:
exc = get_exception()
warnings.append('duplicate command detected: %s' % cmd)
try:
for item in conditionals:
runner.add_conditional(item)
except AddConditionError:
exc = get_exception()
module.fail_json(msg=str(exc), condition=exc.condition)
runner.retries = module.params['retries']
runner.interval = module.params['interval']
runner.match = module.params['match']
try:
runner.run()
except FailedConditionsError:
exc = get_exception()
module.fail_json(msg=str(exc), failed_conditions=exc.failed_conditions)
except FailedConditionalError:
exc = get_exception()
module.fail_json(msg=str(exc), failed_conditional=exc.failed_conditional)
except NetworkError:
exc = get_exception()
module.fail_json(msg=str(exc), **exc.kwargs)
result = dict(changed=False)
result['stdout'] = list()
for cmd in commands:
try:
output = runner.get_command(cmd['command'], cmd.get('output'))
except ValueError:
output = 'command not executed due to check_mode, see warnings'
result['stdout'].append(output)
result['warnings'] = warnings
result['stdout_lines'] = list(to_lines(result['stdout']))
module.exit_json(**result)
def main():
"""main entry point for Ansible module
"""
spec = dict(
commands=dict(type='list'),
rpcs=dict(type='list'),
display=dict(default='xml', choices=['text', 'xml'],
aliases=['format', 'output']),
wait_for=dict(type='list', aliases=['waitfor']),
match=dict(default='all', choices=['all', 'any']),
retries=dict(default=10, type='int'),
interval=dict(default=1, type='int'),
transport=dict(default='netconf', choices=['netconf'])
)
mutually_exclusive = [('commands', 'rpcs')]
module = NetworkModule(argument_spec=spec,
mutually_exclusive=mutually_exclusive,
supports_check_mode=True)
commands = list()
for key in VALID_KEYS.keys():
commands.extend(list(parse(module, key)))
conditionals = module.params['wait_for'] or list()
warnings = list()
runner = CommandRunner(module)
for cmd in commands:
if module.check_mode and not cmd['command'].startswith('show'):
warnings.append('only show commands are supported when using '
'check mode, not executing `%s`' % cmd['command'])
else:
if cmd['command'].startswith('co'):
module.fail_json(msg='junos_command does not support running '
'config mode commands. Please use '
'junos_config instead')
try:
runner.add_command(**cmd)
except AddCommandError:
exc = get_exception()
warnings.append('duplicate command detected: %s' % cmd)
try:
for item in conditionals:
runner.add_conditional(item)
except (ValueError, AddConditionError):
exc = get_exception()
module.fail_json(msg=str(exc), condition=exc.condition)
runner.retries = module.params['retries']
runner.interval = module.params['interval']
runner.match = module.params['match']
try:
runner.run()
except FailedConditionsError:
exc = get_exception()
module.fail_json(msg=str(exc), failed_conditions=exc.failed_conditions)
except FailedConditionalError:
exc = get_exception()
module.fail_json(msg=str(exc), failed_conditional=exc.failed_conditional)
except NetworkError:
exc = get_exception()
module.fail_json(msg=str(exc))
result = dict(changed=False, stdout=list())
for cmd in commands:
try:
output = runner.get_command(cmd['command'], cmd.get('output'))
except ValueError:
output = 'command not executed due to check_mode, see warnings'
result['stdout'].append(output)
result['warnings'] = warnings
result['stdout_lines'] = list(to_lines(result['stdout']))
module.exit_json(**result)