def sequential_time_varying_file_boundary_sts(self):
"""sequential_ltest_time_varying_file_boundary_sts_sequential(self):
Read correct points from ordering file and apply sts to boundary. The boundary is time varying. FIXME add to test_urs2sts.
"""
lat_long_points = [[6.01, 97.0], [6.02, 97.0], [6.05, 96.9],
[6.0, 97.0]]
bounding_polygon = [[6.0, 97.0], [6.01, 97.0], [6.02, 97.0],
[6.02, 97.02], [6.00, 97.02]]
tide = 3.0
time_step_count = 65
time_step = 2.
n = len(lat_long_points)
first_tstep = num.ones(n, num.int)
last_tstep = (time_step_count) * num.ones(n, num.int)
finaltime = num.float(time_step * (time_step_count - 1))
yieldstep = num.float(time_step)
gauge_depth = 20 * num.ones(n, num.float)
ha = 2 * num.ones((n, time_step_count), num.float)
ua = 10 * num.ones((n, time_step_count), num.float)
va = -10 * num.ones((n, time_step_count), num.float)
times = num.arange(0., num.float(time_step_count * time_step),
time_step)
for i in range(n):
#ha[i]+=num.sin(times)
ha[i] += times / finaltime
sts_file = "test"
if myid == 0:
base_name, files = self.write_mux2(lat_long_points,
time_step_count,
time_step,
first_tstep,
last_tstep,
depth=gauge_depth,
ha=ha,
ua=ua,
va=va)
# base name will not exist, but 3 other files are created
# Write order file
file_handle, order_base_name = tempfile.mkstemp("")
os.close(file_handle)
os.remove(order_base_name)
d = ","
order_file = order_base_name + 'order.txt'
fid = open(order_file, 'w')
# Write Header
header = 'index, longitude, latitude\n'
fid.write(header)
indices = [3, 0, 1]
for i in indices:
line=str(i)+d+str(lat_long_points[i][1])+d+\
str(lat_long_points[i][0])+"\n"
fid.write(line)
fid.close()
urs2sts(base_name,
basename_out=sts_file,
ordering_filename=order_file,
mean_stage=tide,
verbose=verbose)
self.delete_mux(files)
assert (os.access(sts_file + '.sts', os.F_OK))
os.remove(order_file)
barrier()
boundary_polygon = create_sts_boundary(sts_file)
# Append the remaining part of the boundary polygon to be defined by
# the user
bounding_polygon_utm = []
for point in bounding_polygon:
zone, easting, northing = redfearn(point[0], point[1])
bounding_polygon_utm.append([easting, northing])
boundary_polygon.append(bounding_polygon_utm[3])
boundary_polygon.append(bounding_polygon_utm[4])
assert num.allclose(bounding_polygon_utm, boundary_polygon)
extent_res = 1000000
meshname = 'urs_test_mesh' + '.tsh'
interior_regions = None
boundary_tags = {'ocean': [0, 1], 'otherocean': [2, 3, 4]}
# have to change boundary tags from last example because now bounding
# polygon starts in different place.
if myid == 0:
create_mesh_from_regions(boundary_polygon,
boundary_tags=boundary_tags,
maximum_triangle_area=extent_res,
filename=meshname,
interior_regions=interior_regions,
verbose=verbose)
barrier()
domain_fbound = Domain(meshname)
domain_fbound.set_quantities_to_be_stored(None)
domain_fbound.set_quantity('stage', tide)
if verbose: print "Creating file boundary condition"
Bf = File_boundary(sts_file + '.sts',
domain_fbound,
boundary_polygon=boundary_polygon)
Br = Reflective_boundary(domain_fbound)
domain_fbound.set_boundary({'ocean': Bf, 'otherocean': Br})
temp_fbound = num.zeros(int(finaltime / yieldstep) + 1, num.float)
if verbose: print "Evolving domain with file boundary condition"
for i, t in enumerate(
domain_fbound.evolve(yieldstep=yieldstep,
finaltime=finaltime,
skip_initial_step=False)):
temp_fbound[i] = domain_fbound.quantities['stage'].centroid_values[
2]
if verbose: domain_fbound.write_time()
domain_drchlt = Domain(meshname)
domain_drchlt.set_quantities_to_be_stored(None)
domain_drchlt.set_starttime(time_step)
domain_drchlt.set_quantity('stage', tide)
Br = Reflective_boundary(domain_drchlt)
#Bd = Dirichlet_boundary([2.0+tide,220+10*tide,-220-10*tide])
Bd = Time_boundary(
domain=domain_drchlt,
f=lambda t: [
2.0 + t / finaltime + tide, 220. + 10. * tide + 10. * t /
finaltime, -220. - 10. * tide - 10. * t / finaltime
])
#Bd = Time_boundary(domain=domain_drchlt,f=lambda t: [2.0+num.sin(t)+tide,10.*(2+20.+num.sin(t)+tide),-10.*(2+20.+num.sin(t)+tide)])
domain_drchlt.set_boundary({'ocean': Bd, 'otherocean': Br})
temp_drchlt = num.zeros(int(finaltime / yieldstep) + 1, num.float)
for i, t in enumerate(
domain_drchlt.evolve(yieldstep=yieldstep,
finaltime=finaltime,
skip_initial_step=False)):
temp_drchlt[i] = domain_drchlt.quantities['stage'].centroid_values[
2]
#domain_drchlt.write_time()
#print domain_fbound.quantities['stage'].vertex_values
#print domain_drchlt.quantities['stage'].vertex_values
assert num.allclose(temp_fbound,
temp_drchlt), temp_fbound - temp_drchlt
assert num.allclose(domain_fbound.quantities['stage'].vertex_values,
domain_drchlt.quantities['stage'].vertex_values)
assert num.allclose(
domain_fbound.quantities['xmomentum'].vertex_values,
domain_drchlt.quantities['xmomentum'].vertex_values)
assert num.allclose(
domain_fbound.quantities['ymomentum'].vertex_values,
domain_drchlt.quantities['ymomentum'].vertex_values)
if not sys.platform == 'win32':
if myid == 0: os.remove(sts_file + '.sts')
if myid == 0: os.remove(meshname)
def parallel_time_varying_file_boundary_sts(self):
""" parallel_test_time_varying_file_boundary_sts_sequential(self):
Read correct points from ordering file and apply sts to boundary.
The boundary is time varying. Compares sequential result with
distributed result found using anuga_parallel
"""
#------------------------------------------------------------
# Define test variables
#------------------------------------------------------------
lat_long_points = [[6.01, 97.0], [6.02, 97.0], [6.05, 96.9],
[6.0, 97.0]]
bounding_polygon = [[6.0, 97.0], [6.01, 97.0], [6.02, 97.0],
[6.02, 97.02], [6.00, 97.02]]
tide = 3.0
time_step_count = 65
time_step = 2
n = len(lat_long_points)
first_tstep = num.ones(n, num.int)
last_tstep = (time_step_count) * num.ones(n, num.int)
finaltime = num.float(time_step * (time_step_count - 1))
yieldstep = num.float(time_step)
gauge_depth = 20 * num.ones(n, num.float)
ha = 2 * num.ones((n, time_step_count), num.float)
ua = 10 * num.ones((n, time_step_count), num.float)
va = -10 * num.ones((n, time_step_count), num.float)
times = num.arange(0, time_step_count * time_step, time_step)
for i in range(n):
#ha[i]+=num.sin(times)
ha[i] += times / finaltime
#------------------------------------------------------------
# Write mux data to file then convert to sts format
#------------------------------------------------------------
sts_file = "test"
if myid == 0:
base_name, files = self.write_mux2(lat_long_points,
time_step_count,
time_step,
first_tstep,
last_tstep,
depth=gauge_depth,
ha=ha,
ua=ua,
va=va)
# base name will not exist, but 3 other files are created
# Write order file
file_handle, order_base_name = tempfile.mkstemp("")
os.close(file_handle)
os.remove(order_base_name)
d = ","
order_file = order_base_name + 'order.txt'
fid = open(order_file, 'w')
# Write Header
header = 'index, longitude, latitude\n'
fid.write(header)
indices = [3, 0, 1]
for i in indices:
line=str(i)+d+str(lat_long_points[i][1])+d+\
str(lat_long_points[i][0])+"\n"
fid.write(line)
fid.close()
urs2sts(base_name,
basename_out=sts_file,
ordering_filename=order_file,
mean_stage=tide,
verbose=verbose)
self.delete_mux(files)
assert (os.access(sts_file + '.sts', os.F_OK))
os.remove(order_file)
barrier()
#------------------------------------------------------------
# Define boundary_polygon on each processor. This polygon defines the
# urs boundary and lies on a portion of the bounding_polygon
#------------------------------------------------------------
boundary_polygon = create_sts_boundary(sts_file)
# Append the remaining part of the boundary polygon to be defined by
# the user
bounding_polygon_utm = []
for point in bounding_polygon:
zone, easting, northing = redfearn(point[0], point[1])
bounding_polygon_utm.append([easting, northing])
boundary_polygon.append(bounding_polygon_utm[3])
boundary_polygon.append(bounding_polygon_utm[4])
assert num.allclose(bounding_polygon_utm, boundary_polygon)
extent_res = 10000
meshname = 'urs_test_mesh' + '.tsh'
interior_regions = None
boundary_tags = {'ocean': [0, 1], 'otherocean': [2, 3, 4]}
#------------------------------------------------------------
# Create mesh on the master processor and store in file. This file
# is read in by each slave processor when needed
#------------------------------------------------------------
if myid == 0:
create_mesh_from_regions(boundary_polygon,
boundary_tags=boundary_tags,
maximum_triangle_area=extent_res,
filename=meshname,
interior_regions=interior_regions,
verbose=verbose)
# barrier()
domain_fbound = Domain(meshname)
domain_fbound.set_quantities_to_be_stored(None)
domain_fbound.set_quantity('stage', tide)
# print domain_fbound.mesh.get_boundary_polygon()
else:
domain_fbound = None
barrier()
if (verbose and myid == 0):
print 'DISTRIBUTING PARALLEL DOMAIN'
domain_fbound = distribute(domain_fbound)
#--------------------------------------------------------------------
# Find which sub_domain in which the interpolation points are located
#
# Sometimes the interpolation points sit exactly
# between two centroids, so in the parallel run we
# reset the interpolation points to the centroids
# found in the sequential run
#--------------------------------------------------------------------
interpolation_points = [[279000, 664000], [280250, 664130],
[279280, 665400], [280500, 665000]]
interpolation_points = num.array(interpolation_points)
#if myid==0:
# import pylab as P
# boundary_polygon=num.array(boundary_polygon)
# P.plot(boundary_polygon[:,0],boundary_polygon[:,1])
# P.plot(interpolation_points[:,0],interpolation_points[:,1],'ko')
# P.show()
fbound_gauge_values = []
fbound_proc_tri_ids = []
for i, point in enumerate(interpolation_points):
fbound_gauge_values.append([]) # Empty list for timeseries
try:
k = domain_fbound.get_triangle_containing_point(point)
if domain_fbound.tri_full_flag[k] == 1:
fbound_proc_tri_ids.append(k)
else:
fbound_proc_tri_ids.append(-1)
except:
fbound_proc_tri_ids.append(-2)
if verbose: print 'P%d has points = %s' % (myid, fbound_proc_tri_ids)
#------------------------------------------------------------
# Set boundary conditions
#------------------------------------------------------------
Bf = File_boundary(sts_file + '.sts',
domain_fbound,
boundary_polygon=boundary_polygon)
Br = Reflective_boundary(domain_fbound)
domain_fbound.set_boundary({'ocean': Bf, 'otherocean': Br})
#------------------------------------------------------------
# Evolve the domain on each processor
#------------------------------------------------------------
for i, t in enumerate(
domain_fbound.evolve(yieldstep=yieldstep,
finaltime=finaltime,
skip_initial_step=False)):
stage = domain_fbound.get_quantity('stage')
for i in range(4):
if fbound_proc_tri_ids[i] > -1:
fbound_gauge_values[i].append(
stage.centroid_values[fbound_proc_tri_ids[i]])
#------------------------------------------------------------
# Create domain to be run sequntially on each processor
#------------------------------------------------------------
domain_drchlt = Domain(meshname)
domain_drchlt.set_quantities_to_be_stored(None)
domain_drchlt.set_starttime(time_step)
domain_drchlt.set_quantity('stage', tide)
Br = Reflective_boundary(domain_drchlt)
#Bd = Dirichlet_boundary([2.0+tide,220+10*tide,-220-10*tide])
Bd = Time_boundary(
domain=domain_drchlt,
function=lambda t: [
2.0 + t / finaltime + tide, 220. + 10. * tide + 10. * t /
finaltime, -220. - 10. * tide - 10. * t / finaltime
])
#Bd = Time_boundary(domain=domain_drchlt,function=lambda t: [2.0+num.sin(t)+tide,10.*(2+20.+num.sin(t)+tide),-10.*(2+20.+num.sin(t)+tide)])
domain_drchlt.set_boundary({'ocean': Bd, 'otherocean': Br})
drchlt_gauge_values = []
drchlt_proc_tri_ids = []
for i, point in enumerate(interpolation_points):
drchlt_gauge_values.append([]) # Empty list for timeseries
try:
k = domain_drchlt.get_triangle_containing_point(point)
if domain_drchlt.tri_full_flag[k] == 1:
drchlt_proc_tri_ids.append(k)
else:
drchlt_proc_tri_ids.append(-1)
except:
drchlt_proc_tri_ids.append(-2)
if verbose: print 'P%d has points = %s' % (myid, drchlt_proc_tri_ids)
#------------------------------------------------------------
# Evolve entire domain on each processor
#------------------------------------------------------------
for i, t in enumerate(
domain_drchlt.evolve(yieldstep=yieldstep,
finaltime=finaltime,
skip_initial_step=False)):
stage = domain_drchlt.get_quantity('stage')
for i in range(4):
drchlt_gauge_values[i].append(
stage.centroid_values[drchlt_proc_tri_ids[i]])
#------------------------------------------------------------
# Compare sequential values with parallel values
#------------------------------------------------------------
barrier()
success = True
for i in range(4):
if fbound_proc_tri_ids[i] > -1:
fbound_gauge_values[i] = num.array(fbound_gauge_values[i])
drchlt_gauge_values[i] = num.array(drchlt_gauge_values[i])
#print i,fbound_gauge_values[i][4]
#print i,drchlt_gauge_values[i][4]
success = success and num.allclose(fbound_gauge_values[i],
drchlt_gauge_values[i])
assert success #, (fbound_gauge_values[i]-drchlt_gauge_values[i])
#assert_(success)
if not sys.platform == 'win32':
if myid == 0: os.remove(sts_file + '.sts')
if myid == 0: os.remove(meshname)
def sequential_time_varying_file_boundary_sts(self):
"""sequential_ltest_time_varying_file_boundary_sts_sequential(self):
Read correct points from ordering file and apply sts to boundary. The boundary is time varying. FIXME add to test_urs2sts.
"""
lat_long_points=[[6.01,97.0],[6.02,97.0],[6.05,96.9],[6.0,97.0]]
bounding_polygon=[[6.0,97.0],[6.01,97.0],[6.02,97.0],
[6.02,97.02],[6.00,97.02]]
tide = 3.0
time_step_count = 65
time_step = 2.
n=len(lat_long_points)
first_tstep=num.ones(n,num.int)
last_tstep=(time_step_count)*num.ones(n,num.int)
finaltime=num.float(time_step*(time_step_count-1))
yieldstep=num.float(time_step)
gauge_depth=20*num.ones(n,num.float)
ha=2*num.ones((n,time_step_count),num.float)
ua=10*num.ones((n,time_step_count),num.float)
va=-10*num.ones((n,time_step_count),num.float)
times=num.arange(0., num.float(time_step_count*time_step), time_step)
for i in range(n):
#ha[i]+=num.sin(times)
ha[i]+=times/finaltime
sts_file="test"
if myid==0:
base_name, files = self.write_mux2(lat_long_points,
time_step_count,
time_step,
first_tstep,
last_tstep,
depth=gauge_depth,
ha=ha,
ua=ua,
va=va)
# base name will not exist, but 3 other files are created
# Write order file
file_handle, order_base_name = tempfile.mkstemp("")
os.close(file_handle)
os.remove(order_base_name)
d=","
order_file=order_base_name+'order.txt'
fid=open(order_file,'w')
# Write Header
header='index, longitude, latitude\n'
fid.write(header)
indices=[3,0,1]
for i in indices:
line=str(i)+d+str(lat_long_points[i][1])+d+\
str(lat_long_points[i][0])+"\n"
fid.write(line)
fid.close()
urs2sts(base_name,
basename_out=sts_file,
ordering_filename=order_file,
mean_stage=tide,
verbose=verbose)
self.delete_mux(files)
assert(os.access(sts_file+'.sts', os.F_OK))
os.remove(order_file)
barrier()
boundary_polygon = create_sts_boundary(sts_file)
# Append the remaining part of the boundary polygon to be defined by
# the user
bounding_polygon_utm=[]
for point in bounding_polygon:
zone,easting,northing=redfearn(point[0],point[1])
bounding_polygon_utm.append([easting,northing])
boundary_polygon.append(bounding_polygon_utm[3])
boundary_polygon.append(bounding_polygon_utm[4])
assert num.allclose(bounding_polygon_utm,boundary_polygon)
extent_res=1000000
meshname = 'urs_test_mesh' + '.tsh'
interior_regions=None
boundary_tags={'ocean': [0,1], 'otherocean': [2,3,4]}
# have to change boundary tags from last example because now bounding
# polygon starts in different place.
if myid==0:
create_mesh_from_regions(boundary_polygon,
boundary_tags=boundary_tags,
maximum_triangle_area=extent_res,
filename=meshname,
interior_regions=interior_regions,
verbose=verbose)
barrier()
domain_fbound = Domain(meshname)
domain_fbound.set_quantities_to_be_stored(None)
domain_fbound.set_quantity('stage', tide)
if verbose: print "Creating file boundary condition"
Bf = File_boundary(sts_file+'.sts',
domain_fbound,
boundary_polygon=boundary_polygon)
Br = Reflective_boundary(domain_fbound)
domain_fbound.set_boundary({'ocean': Bf,'otherocean': Br})
temp_fbound=num.zeros(int(finaltime/yieldstep)+1,num.float)
if verbose: print "Evolving domain with file boundary condition"
for i, t in enumerate(domain_fbound.evolve(yieldstep=yieldstep,
finaltime=finaltime,
skip_initial_step = False)):
temp_fbound[i]=domain_fbound.quantities['stage'].centroid_values[2]
if verbose: domain_fbound.write_time()
domain_drchlt = Domain(meshname)
domain_drchlt.set_quantities_to_be_stored(None)
domain_drchlt.set_starttime(time_step)
domain_drchlt.set_quantity('stage', tide)
Br = Reflective_boundary(domain_drchlt)
#Bd = Dirichlet_boundary([2.0+tide,220+10*tide,-220-10*tide])
Bd = Time_boundary(domain=domain_drchlt, f=lambda t: [2.0+t/finaltime+tide,220.+10.*tide+10.*t/finaltime,-220.-10.*tide-10.*t/finaltime])
#Bd = Time_boundary(domain=domain_drchlt,f=lambda t: [2.0+num.sin(t)+tide,10.*(2+20.+num.sin(t)+tide),-10.*(2+20.+num.sin(t)+tide)])
domain_drchlt.set_boundary({'ocean': Bd,'otherocean': Br})
temp_drchlt=num.zeros(int(finaltime/yieldstep)+1,num.float)
for i, t in enumerate(domain_drchlt.evolve(yieldstep=yieldstep,
finaltime=finaltime,
skip_initial_step = False)):
temp_drchlt[i]=domain_drchlt.quantities['stage'].centroid_values[2]
#domain_drchlt.write_time()
#print domain_fbound.quantities['stage'].vertex_values
#print domain_drchlt.quantities['stage'].vertex_values
assert num.allclose(temp_fbound,temp_drchlt),temp_fbound-temp_drchlt
assert num.allclose(domain_fbound.quantities['stage'].vertex_values,
domain_drchlt.quantities['stage'].vertex_values)
assert num.allclose(domain_fbound.quantities['xmomentum'].vertex_values,
domain_drchlt.quantities['xmomentum'].vertex_values)
assert num.allclose(domain_fbound.quantities['ymomentum'].vertex_values,
domain_drchlt.quantities['ymomentum'].vertex_values)
if not sys.platform == 'win32':
if myid==0: os.remove(sts_file+'.sts')
if myid==0: os.remove(meshname)
def test_file_boundary_stsIV_sinewave_ordering(self):
"""test_file_boundary_stsIV_sinewave_ordering(self):
Read correct points from ordering file and apply sts to boundary
This one uses a sine wave and compares to time boundary
"""
lat_long_points=[[6.01, 97.0], [6.02, 97.0], [6.05, 96.9], [6.0, 97.0]]
bounding_polygon=[[6.0, 97.0], [6.01, 97.0], [6.02,97.0], \
[6.02,97.02], [6.00,97.02]]
tide = 0.35
time_step_count = 50
time_step = 0.1
times_ref = num.arange(0, time_step_count*time_step, time_step)
n=len(lat_long_points)
first_tstep=num.ones(n,num.int)
last_tstep=(time_step_count)*num.ones(n,num.int)
gauge_depth=20*num.ones(n,num.float)
ha1=num.ones((n,time_step_count),num.float)
ua1=3.*num.ones((n,time_step_count),num.float)
va1=2.*num.ones((n,time_step_count),num.float)
for i in range(n):
ha1[i]=num.sin(times_ref)
base_name, files = self.write_mux2(lat_long_points,
time_step_count, time_step,
first_tstep, last_tstep,
depth=gauge_depth,
ha=ha1,
ua=ua1,
va=va1)
# Write order file
file_handle, order_base_name = tempfile.mkstemp("")
os.close(file_handle)
os.remove(order_base_name)
d=","
order_file=order_base_name+'order.txt'
fid=open(order_file,'w')
# Write Header
header='index, longitude, latitude\n'
fid.write(header)
indices=[3,0,1]
for i in indices:
line=str(i)+d+str(lat_long_points[i][1])+d+\
str(lat_long_points[i][0])+"\n"
fid.write(line)
fid.close()
sts_file=base_name
urs2sts(base_name, basename_out=sts_file,
ordering_filename=order_file,
mean_stage=tide,
verbose=False)
self.delete_mux(files)
# Now read the sts file and check that values have been stored correctly.
fid = NetCDFFile(sts_file + '.sts')
# Check the time vector
times = fid.variables['time'][:]
#print times
# Check sts quantities
stage = fid.variables['stage'][:]
xmomentum = fid.variables['xmomentum'][:]
ymomentum = fid.variables['ymomentum'][:]
elevation = fid.variables['elevation'][:]
# Create beginnings of boundary polygon based on sts_boundary
boundary_polygon = create_sts_boundary(base_name)
os.remove(order_file)
# Append the remaining part of the boundary polygon to be defined by
# the user
bounding_polygon_utm=[]
for point in bounding_polygon:
zone,easting,northing=redfearn(point[0],point[1])
bounding_polygon_utm.append([easting,northing])
boundary_polygon.append(bounding_polygon_utm[3])
boundary_polygon.append(bounding_polygon_utm[4])
#print 'boundary_polygon', boundary_polygon
plot=False
if plot:
from pylab import plot,show,axis
boundary_polygon=ensure_numeric(boundary_polygon)
bounding_polygon_utm=ensure_numeric(bounding_polygon_utm)
#plot(lat_long_points[:,0],lat_long_points[:,1],'o')
plot(boundary_polygon[:,0], boundary_polygon[:,1])
plot(bounding_polygon_utm[:,0],bounding_polygon_utm[:,1])
show()
assert num.allclose(bounding_polygon_utm,boundary_polygon)
extent_res=1000000
meshname = 'urs_test_mesh' + '.tsh'
interior_regions=None
boundary_tags={'ocean': [0,1], 'otherocean': [2,3,4]}
# have to change boundary tags from last example because now bounding
# polygon starts in different place.
create_mesh_from_regions(boundary_polygon,
boundary_tags=boundary_tags,
maximum_triangle_area=extent_res,
filename=meshname,
interior_regions=interior_regions,
verbose=False)
domain_fbound = Domain(meshname)
domain_fbound.set_quantity('stage', tide)
Bf = File_boundary(sts_file+'.sts',
domain_fbound,
boundary_polygon=boundary_polygon)
Br = Reflective_boundary(domain_fbound)
domain_fbound.set_boundary({'ocean': Bf,'otherocean': Br})
finaltime=time_step*(time_step_count-1)
yieldstep=time_step
temp_fbound=num.zeros(int(finaltime/yieldstep)+1,num.float)
for i, t in enumerate(domain_fbound.evolve(yieldstep=yieldstep,
finaltime=finaltime,
skip_initial_step=False)):
temp_fbound[i]=domain_fbound.quantities['stage'].centroid_values[2]
domain_time = Domain(meshname)
domain_time.set_quantity('stage', tide)
Br = Reflective_boundary(domain_time)
Bw = Time_boundary(domain=domain_time,
function=lambda t: [num.sin(t)+tide,3.*(20.+num.sin(t)+tide),2.*(20.+num.sin(t)+tide)])
domain_time.set_boundary({'ocean': Bw,'otherocean': Br})
temp_time=num.zeros(int(finaltime/yieldstep)+1,num.float)
domain_time.set_starttime(domain_fbound.get_starttime())
for i, t in enumerate(domain_time.evolve(yieldstep=yieldstep,
finaltime=finaltime,
skip_initial_step=False)):
temp_time[i]=domain_time.quantities['stage'].centroid_values[2]
assert num.allclose(temp_fbound, temp_time)
assert num.allclose(domain_fbound.quantities['stage'].vertex_values,
domain_time.quantities['stage'].vertex_values)
assert num.allclose(domain_fbound.quantities['xmomentum'].vertex_values,
domain_time.quantities['xmomentum'].vertex_values)
assert num.allclose(domain_fbound.quantities['ymomentum'].vertex_values,
domain_time.quantities['ymomentum'].vertex_values)
try:
os.remove(sts_file+'.sts')
except:
# Windoze can't remove this file for some reason
pass
os.remove(meshname)
def parallel_time_varying_file_boundary_sts(self):
""" parallel_test_time_varying_file_boundary_sts_sequential(self):
Read correct points from ordering file and apply sts to boundary.
The boundary is time varying. Compares sequential result with
distributed result found using anuga_parallel
"""
#------------------------------------------------------------
# Define test variables
#------------------------------------------------------------
lat_long_points=[[6.01,97.0],[6.02,97.0],[6.05,96.9],[6.0,97.0]]
bounding_polygon=[[6.0,97.0],[6.01,97.0],[6.02,97.0],
[6.02,97.02],[6.00,97.02]]
tide = 3.0
time_step_count = 65
time_step = 2
n=len(lat_long_points)
first_tstep=num.ones(n,num.int)
last_tstep=(time_step_count)*num.ones(n,num.int)
finaltime=num.float(time_step*(time_step_count-1))
yieldstep=num.float(time_step)
gauge_depth=20*num.ones(n,num.float)
ha=2*num.ones((n,time_step_count),num.float)
ua=10*num.ones((n,time_step_count),num.float)
va=-10*num.ones((n,time_step_count),num.float)
times=num.arange(0, time_step_count*time_step, time_step)
for i in range(n):
#ha[i]+=num.sin(times)
ha[i]+=times/finaltime
#------------------------------------------------------------
# Write mux data to file then convert to sts format
#------------------------------------------------------------
sts_file="test"
if myid==0:
base_name, files = self.write_mux2(lat_long_points,
time_step_count,
time_step,
first_tstep,
last_tstep,
depth=gauge_depth,
ha=ha,
ua=ua,
va=va)
# base name will not exist, but 3 other files are created
# Write order file
file_handle, order_base_name = tempfile.mkstemp("")
os.close(file_handle)
os.remove(order_base_name)
d=","
order_file=order_base_name+'order.txt'
fid=open(order_file,'w')
# Write Header
header='index, longitude, latitude\n'
fid.write(header)
indices=[3,0,1]
for i in indices:
line=str(i)+d+str(lat_long_points[i][1])+d+\
str(lat_long_points[i][0])+"\n"
fid.write(line)
fid.close()
urs2sts(base_name,
basename_out=sts_file,
ordering_filename=order_file,
mean_stage=tide,
verbose=verbose)
self.delete_mux(files)
assert(os.access(sts_file+'.sts', os.F_OK))
os.remove(order_file)
barrier()
#------------------------------------------------------------
# Define boundary_polygon on each processor. This polygon defines the
# urs boundary and lies on a portion of the bounding_polygon
#------------------------------------------------------------
boundary_polygon = create_sts_boundary(sts_file)
# Append the remaining part of the boundary polygon to be defined by
# the user
bounding_polygon_utm=[]
for point in bounding_polygon:
zone,easting,northing=redfearn(point[0],point[1])
bounding_polygon_utm.append([easting,northing])
boundary_polygon.append(bounding_polygon_utm[3])
boundary_polygon.append(bounding_polygon_utm[4])
assert num.allclose(bounding_polygon_utm,boundary_polygon)
extent_res=10000
meshname = 'urs_test_mesh' + '.tsh'
interior_regions=None
boundary_tags={'ocean': [0,1], 'otherocean': [2,3,4]}
#------------------------------------------------------------
# Create mesh on the master processor and store in file. This file
# is read in by each slave processor when needed
#------------------------------------------------------------
if myid==0:
create_mesh_from_regions(boundary_polygon,
boundary_tags=boundary_tags,
maximum_triangle_area=extent_res,
filename=meshname,
interior_regions=interior_regions,
verbose=verbose)
# barrier()
domain_fbound = Domain(meshname)
domain_fbound.set_quantities_to_be_stored(None)
domain_fbound.set_quantity('stage', tide)
# print domain_fbound.mesh.get_boundary_polygon()
else:
domain_fbound=None
barrier()
if ( verbose and myid == 0 ):
print 'DISTRIBUTING PARALLEL DOMAIN'
domain_fbound = distribute(domain_fbound)
#--------------------------------------------------------------------
# Find which sub_domain in which the interpolation points are located
#
# Sometimes the interpolation points sit exactly
# between two centroids, so in the parallel run we
# reset the interpolation points to the centroids
# found in the sequential run
#--------------------------------------------------------------------
interpolation_points = [[279000,664000], [280250,664130],
[279280,665400], [280500,665000]]
interpolation_points=num.array(interpolation_points)
#if myid==0:
# import pylab as P
# boundary_polygon=num.array(boundary_polygon)
# P.plot(boundary_polygon[:,0],boundary_polygon[:,1])
# P.plot(interpolation_points[:,0],interpolation_points[:,1],'ko')
# P.show()
fbound_gauge_values = []
fbound_proc_tri_ids = []
for i, point in enumerate(interpolation_points):
fbound_gauge_values.append([]) # Empty list for timeseries
try:
k = domain_fbound.get_triangle_containing_point(point)
if domain_fbound.tri_full_flag[k] == 1:
fbound_proc_tri_ids.append(k)
else:
fbound_proc_tri_ids.append(-1)
except:
fbound_proc_tri_ids.append(-2)
if verbose: print 'P%d has points = %s' %(myid, fbound_proc_tri_ids)
#------------------------------------------------------------
# Set boundary conditions
#------------------------------------------------------------
Bf = File_boundary(sts_file+'.sts',
domain_fbound,
boundary_polygon=boundary_polygon)
Br = Reflective_boundary(domain_fbound)
domain_fbound.set_boundary({'ocean': Bf,'otherocean': Br})
#------------------------------------------------------------
# Evolve the domain on each processor
#------------------------------------------------------------
for i, t in enumerate(domain_fbound.evolve(yieldstep=yieldstep,
finaltime=finaltime,
skip_initial_step = False)):
stage = domain_fbound.get_quantity('stage')
for i in range(4):
if fbound_proc_tri_ids[i] > -1:
fbound_gauge_values[i].append(stage.centroid_values[fbound_proc_tri_ids[i]])
#------------------------------------------------------------
# Create domain to be run sequntially on each processor
#------------------------------------------------------------
domain_drchlt = Domain(meshname)
domain_drchlt.set_quantities_to_be_stored(None)
domain_drchlt.set_starttime(time_step)
domain_drchlt.set_quantity('stage', tide)
Br = Reflective_boundary(domain_drchlt)
#Bd = Dirichlet_boundary([2.0+tide,220+10*tide,-220-10*tide])
Bd = Time_boundary(domain=domain_drchlt, function=lambda t: [2.0+t/finaltime+tide,220.+10.*tide+10.*t/finaltime,-220.-10.*tide-10.*t/finaltime])
#Bd = Time_boundary(domain=domain_drchlt,function=lambda t: [2.0+num.sin(t)+tide,10.*(2+20.+num.sin(t)+tide),-10.*(2+20.+num.sin(t)+tide)])
domain_drchlt.set_boundary({'ocean': Bd,'otherocean': Br})
drchlt_gauge_values = []
drchlt_proc_tri_ids = []
for i, point in enumerate(interpolation_points):
drchlt_gauge_values.append([]) # Empty list for timeseries
try:
k = domain_drchlt.get_triangle_containing_point(point)
if domain_drchlt.tri_full_flag[k] == 1:
drchlt_proc_tri_ids.append(k)
else:
drchlt_proc_tri_ids.append(-1)
except:
drchlt_proc_tri_ids.append(-2)
if verbose: print 'P%d has points = %s' %(myid, drchlt_proc_tri_ids)
#------------------------------------------------------------
# Evolve entire domain on each processor
#------------------------------------------------------------
for i, t in enumerate(domain_drchlt.evolve(yieldstep=yieldstep,
finaltime=finaltime,
skip_initial_step = False)):
stage = domain_drchlt.get_quantity('stage')
for i in range(4):
drchlt_gauge_values[i].append(stage.centroid_values[drchlt_proc_tri_ids[i]])
#------------------------------------------------------------
# Compare sequential values with parallel values
#------------------------------------------------------------
barrier()
success = True
for i in range(4):
if fbound_proc_tri_ids[i] > -1:
fbound_gauge_values[i]=num.array(fbound_gauge_values[i])
drchlt_gauge_values[i]=num.array(drchlt_gauge_values[i])
#print i,fbound_gauge_values[i][4]
#print i,drchlt_gauge_values[i][4]
success = success and num.allclose(fbound_gauge_values[i], drchlt_gauge_values[i])
assert success#, (fbound_gauge_values[i]-drchlt_gauge_values[i])
#assert_(success)
if not sys.platform == 'win32':
if myid==0: os.remove(sts_file+'.sts')
if myid==0: os.remove(meshname)
