def load_arduino_cli(sketch_path=None):
"""
Launches a subprocess to invoke the Arduino IDE command line to open,
verify or upload an sketch, the location of which is indicated in the input
parameter.
:param sketch_path: Path to the sketch to load into the Arduino IDE.
:return: A tuple with the following data (success, conclusion, out, error,
exit_code)
"""
success = True
conclusion = error = out = exit_code = ''
# Input sanitation and output defaults
if not sketch_path:
sketch_path = create_sketch_default()
else:
if not os.path.isfile(sketch_path):
conclusion = error = 'Provided sketch path is not a valid file: %s'\
% sketch_path
success = False
return success, conclusion, out, error, exit_code
settings = ServerCompilerSettings()
# Check if CLI flags have been set
if not settings.compiler_dir:
success = False
conclusion = 'Unable to find Arduino IDE'
error = 'The compiler directory has not been set.\n' + \
'Please set it in the Settings.'
else:
if not settings.load_ide_option:
success = False
conclusion = 'What should we do with the Sketch?'
error = 'The launch IDE option has not been set.\n' + \
'Please select an IDE option in the Settings.'
elif settings.load_ide_option == 'upload':
if not settings.get_serial_port_flag():
success = False
conclusion = 'Serial Port unavailable'
error = 'The Serial Port does not exist.\n' + \
'Please check if the Arduino is correctly ' + \
'connected to the PC and select the Serial Port in ' +\
'the Settings.'
if not settings.get_arduino_board_flag():
success = False
conclusion = 'Unknown Arduino Board'
error = 'The Arduino Board has not been set.\n' + \
'Please select the appropriate Arduino Board from ' + \
'the settings.'
if success:
# Concatenates the CLI command and execute if the flags are valid
cli_command = [settings.compiler_dir]
if settings.load_ide_option == 'upload':
print('\nUploading sketch to Arduino...')
# This success conclusion message gets overwritten in case of error
conclusion = 'Successfully Uploaded Sketch'
cli_command.append('--upload')
cli_command.append('--port')
cli_command.append(settings.get_serial_port_flag())
cli_command.append('--board')
cli_command.append(settings.get_arduino_board_flag())
elif settings.load_ide_option == 'verify':
print('\nVerifying the sketch...')
# This success conclusion message gets overwritten in case of error
conclusion = 'Successfully Verified Sketch'
cli_command.append('--verify')
elif settings.load_ide_option == 'open':
print('\nOpening the sketch in the Arduino IDE...')
conclusion = 'Sketch opened in IDE'
out = 'The sketch should be loaded in the Arduino IDE.'
cli_command.append("%s" % sketch_path)
print('CLI command: %s' % ' '.join(cli_command))
# Python 2 needs the input to subprocess.Popen to be in system encoding
if sys.version_info[0] < 3:
for item in six_moves.range(len(cli_command)):
cli_command[item] = cli_command[item].encode(
locale.getpreferredencoding())
if settings.load_ide_option == 'open':
# Open IDE in a subprocess without capturing outputs
subprocess.Popen(cli_command, shell=False)
# Wait a few seconds to allow IDE to open before sending back data
time.sleep(5)
else:
# Launch the Arduino CLI in a subprocess and capture output data
process = subprocess.Popen(cli_command,
stdout=subprocess.PIPE,
stderr=subprocess.PIPE,
shell=False)
out, error = process.communicate()
out = six.u(out)
error = six.u(error)
exit_code = process.returncode
print('Arduino output:\n%s' % out)
print('Arduino Error output:\n%s' % error)
print('Arduino Exit code: %s' % exit_code)
# For some reason Arduino CLI can return 256 on success
if (process.returncode != 0) and (process.returncode != 256):
success = False
if exit_code == 1:
conclusion = 'Build or Upload failed'
elif exit_code == 2:
conclusion = 'Sketch not found'
elif exit_code == 3:
conclusion = 'Invalid command line argument'
elif exit_code == 4:
conclusion =\
'Preference passed to "get-pref" flag does not exist'
else:
conclusion = 'Unexpected exit error code: %s' % exit_code
return success, conclusion, out, error, exit_code
def load_arduino_cli(sketch_path=None):
"""
Launches a subprocess to invoke the Arduino IDE command line to open,
verify or upload an sketch, the location of which is indicated in the input
parameter.
:param sketch_path: Path to the sketch to load into the Arduino IDE.
:return: A tuple with the following data (success, conclusion, out, error,
exit_code)
"""
success = True
conclusion = error = out = exit_code = ''
# Input sanitation and output defaults
if not sketch_path:
sketch_path = create_sketch_default()
else:
if not os.path.isfile(sketch_path):
conclusion = error = 'Provided sketch path is not a valid file: %s'\
% sketch_path
success = False
return success, conclusion, out, error, exit_code
settings = ServerCompilerSettings()
# Check if CLI flags have been set
if not settings.compiler_dir:
success = False
conclusion = 'arduinoOpErrorIdeDirTitle'
error = 'arduinoOpErrorIdeDirBody'
else:
if not settings.load_ide_option:
success = False
conclusion = 'arduinoOpErrorIdeOptionTitle'
error = 'arduinoOpErrorIdeOptionBody'
elif settings.load_ide_option == 'upload':
if not settings.get_serial_port_flag():
success = False
conclusion = 'arduinoOpErrorIdePortTitle'
error = 'arduinoOpErrorIdePortBody'
if not settings.get_arduino_board_flag():
success = False
conclusion = 'arduinoOpErrorIdeBoardTitle'
error = 'arduinoOpErrorIdeBoardBody'
if success:
# Concatenates the CLI command and execute if the flags are valid
cli_command = [settings.compiler_dir]
if settings.load_ide_option == 'upload':
print('\nUploading sketch to Arduino...')
# This success conclusion message gets overwritten in case of error
conclusion = 'arduinoOpUploadedTitle'
cli_command.append('--upload')
cli_command.append('--port')
cli_command.append(settings.get_serial_port_flag())
cli_command.append('--board')
cli_command.append(settings.get_arduino_board_flag())
elif settings.load_ide_option == 'verify':
print('\nVerifying the sketch...')
# This success conclusion message gets overwritten in case of error
conclusion = 'arduinoOpVerifiedTitle'
cli_command.append('--board')
cli_command.append(settings.get_arduino_board_flag())
cli_command.append('--verify')
elif settings.load_ide_option == 'open':
print('\nOpening the sketch in the Arduino IDE...')
conclusion = 'arduinoOpOpenedTitle'
out = 'arduinoOpOpenedBody'
cli_command.append("%s" % sketch_path)
print('CLI command: %s' % ' '.join(cli_command))
# Python 2 needs the input to subprocess.Popen to be in system encoding
if sys.version_info[0] < 3:
for item in six_moves.range(len(cli_command)):
cli_command[item] = cli_command[item].encode(
locale.getpreferredencoding())
if settings.load_ide_option == 'open':
# Open IDE in a subprocess without capturing outputs
subprocess.Popen(cli_command, shell=False)
# Wait a few seconds to allow IDE to open before sending back data
time.sleep(5)
else:
# Launch the Arduino CLI in a subprocess and capture output data
process = subprocess.Popen(cli_command,
stdout=subprocess.PIPE,
stderr=subprocess.PIPE,
shell=False)
out, error = process.communicate()
out = six.u(out)
error = six.u(error)
exit_code = process.returncode
print('Arduino output:\n%s' % out)
print('Arduino Error output:\n%s' % error)
print('Arduino Exit code: %s' % exit_code)
# For some reason Arduino CLI can return 256 on success
if (process.returncode != 0) and (process.returncode != 256):
success = False
if exit_code == 1:
conclusion = 'arduinoOpErrorUpVerTitle'
elif exit_code == 2:
conclusion = 'arduinoOpErrorSketchTitle'
elif exit_code == 3:
conclusion = 'arduinoOpErrorFlagTitle'
elif exit_code == 4:
conclusion = 'arduinoOpErrorFlagPrefTitle'
else:
conclusion = 'Unexpected exit error code: %s' % exit_code
return success, conclusion, out, error, exit_code
def load_arduino_cli(sketch_path=None):
"""
Launches a subprocess to invoke the Arduino IDE command line to open,
verify or upload an sketch, the location of which is indicated in the input
parameter.
:param sketch_path: Path to the sketch to load into the Arduino IDE.
:return: A tuple with the following data (success, conclusion, out, error,
exit_code)
"""
success = True
conclusion = error = out = exit_code = ''
# Input sanitation and output defaults
if not sketch_path:
sketch_path = create_sketch_default()
else:
if not os.path.isfile(sketch_path):
conclusion = error = 'Provided sketch path is not a valid file: %s'\
% sketch_path
success = False
return success, conclusion, out, error, exit_code
settings = ServerCompilerSettings()
# Check if CLI flags have been set
if not settings.compiler_dir:
success = False
conclusion = 'arduinoOpErrorIdeDirTitle'
error = 'arduinoOpErrorIdeDirBody'
else:
if not settings.load_ide_option:
success = False
conclusion = 'arduinoOpErrorIdeOptionTitle'
error = 'arduinoOpErrorIdeOptionBody'
elif settings.load_ide_option == 'upload':
if not settings.get_serial_port_flag():
success = False
conclusion = 'arduinoOpErrorIdePortTitle'
error = 'arduinoOpErrorIdePortBody'
if not settings.get_arduino_board_flag():
success = False
conclusion = 'arduinoOpErrorIdeBoardTitle'
error = 'arduinoOpErrorIdeBoardBody'
if success:
# Concatenates the CLI command and execute if the flags are valid
cli_command = [settings.compiler_dir]
if settings.load_ide_option == 'upload':
print('\nUploading sketch to Arduino...')
# This success conclusion message gets overwritten in case of error
conclusion = 'arduinoOpUploadedTitle'
cli_command.append('--upload')
cli_command.append('--port')
cli_command.append(settings.get_serial_port_flag())
cli_command.append('--board')
cli_command.append(settings.get_arduino_board_flag())
elif settings.load_ide_option == 'verify':
print('\nVerifying the sketch...')
# This success conclusion message gets overwritten in case of error
conclusion = 'arduinoOpVerifiedTitle'
cli_command.append('--verify')
elif settings.load_ide_option == 'open':
print('\nOpening the sketch in the Arduino IDE...')
conclusion = 'arduinoOpOpenedTitle'
out = 'arduinoOpOpenedBody'
cli_command.append("%s" % sketch_path)
print('CLI command: %s' % ' '.join(cli_command))
# Python 2 needs the input to subprocess.Popen to be in system encoding
if sys.version_info[0] < 3:
for item in six_moves.range(len(cli_command)):
cli_command[item] = cli_command[item].encode(
locale.getpreferredencoding())
if settings.load_ide_option == 'open':
# Open IDE in a subprocess without capturing outputs
subprocess.Popen(cli_command, shell=False)
# Wait a few seconds to allow IDE to open before sending back data
time.sleep(5)
else:
# Launch the Arduino CLI in a subprocess and capture output data
process = subprocess.Popen(
cli_command, stdout=subprocess.PIPE, stderr=subprocess.PIPE,
shell=False)
out, error = process.communicate()
out = six.u(out)
error = six.u(error)
exit_code = process.returncode
print('Arduino output:\n%s' % out)
print('Arduino Error output:\n%s' % error)
print('Arduino Exit code: %s' % exit_code)
# For some reason Arduino CLI can return 256 on success
if (process.returncode != 0) and (process.returncode != 256):
success = False
if exit_code == 1:
conclusion = 'arduinoOpErrorUpVerTitle'
elif exit_code == 2:
conclusion = 'arduinoOpErrorSketchTitle'
elif exit_code == 3:
conclusion = 'arduinoOpErrorFlagTitle'
elif exit_code == 4:
conclusion = 'arduinoOpErrorFlagPrefTitle'
else:
conclusion = 'Unexpected exit error code: %s' % exit_code
return success, conclusion, out, error, exit_code
def load_arduino_cli(sketch_path=None):
"""
Launches a subprocess to invoke the Arduino IDE command line to open,
verify or upload an sketch, the location of which is indicated in the input
parameter.
:param sketch_path: Path to the sketch to load into the Arduino IDE.
:return: A tuple with the following data (success, conclusion, out, error,
exit_code)
"""
success = True
conclusion = error = out = exit_code = ''
# Input sanitation and output defaults
if not sketch_path:
sketch_path = create_sketch_default()
else:
if not os.path.isfile(sketch_path):
conclusion = error = 'Provided sketch path is not a valid file: %s'\
% sketch_path
success = False
return success, conclusion, out, error, exit_code
settings = ServerCompilerSettings()
# Check if CLI flags have been set
if not settings.compiler_dir:
success = False
conclusion = 'Unable to find Arduino IDE'
error = 'The compiler directory has not been set.\n' + \
'Please set it in the Settings.'
else:
if not settings.load_ide_option:
success = False
conclusion = 'What should we do with the Sketch?'
error = 'The launch IDE option has not been set.\n' + \
'Please select an IDE option in the Settings.'
elif settings.load_ide_option == 'upload':
if not settings.get_serial_port_flag():
success = False
conclusion = 'Serial Port unavailable'
error = 'The Serial Port does not exist.\n' + \
'Please check if the Arduino is correctly ' + \
'connected to the PC and select the Serial Port in ' +\
'the Settings.'
if not settings.get_arduino_board_flag():
success = False
conclusion = 'Unknown Arduino Board'
error = 'The Arduino Board has not been set.\n' + \
'Please select the appropriate Arduino Board from ' + \
'the settings.'
if success:
# Concatenates the CLI command and execute if the flags are valid
cli_command = [settings.compiler_dir]
if settings.load_ide_option == 'upload':
print('\nUploading sketch to Arduino...')
# This success conclusion message gets overwritten in case of error
conclusion = 'Successfully Uploaded Sketch'
cli_command.append('--upload')
cli_command.append('--port')
cli_command.append(settings.get_serial_port_flag())
cli_command.append('--board')
cli_command.append(settings.get_arduino_board_flag())
elif settings.load_ide_option == 'verify':
print('\nVerifying the sketch...')
# This success conclusion message gets overwritten in case of error
conclusion = 'Successfully Verified Sketch'
cli_command.append('--verify')
elif settings.load_ide_option == 'open':
print('\nOpening the sketch in the Arduino IDE...')
conclusion = 'Sketch opened in IDE'
out = 'The sketch should be loaded in the Arduino IDE.'
cli_command.append("%s" % sketch_path)
print('CLI command: %s' % ' '.join(cli_command))
# Python 2 needs the input to subprocess.Popen to be in system encoding
if sys.version_info[0] < 3:
for item in six_moves.range(len(cli_command)):
cli_command[item] = cli_command[item].encode(
locale.getpreferredencoding())
if settings.load_ide_option == 'open':
# Open IDE in a subprocess without capturing outputs
subprocess.Popen(cli_command, shell=False)
# Wait a few seconds to allow IDE to open before sending back data
time.sleep(5)
else:
# Launch the Arduino CLI in a subprocess and capture output data
process = subprocess.Popen(
cli_command, stdout=subprocess.PIPE, stderr=subprocess.PIPE,
shell=False)
out, error = process.communicate()
out = six.u(out)
error = six.u(error)
exit_code = process.returncode
print('Arduino output:\n%s' % out)
print('Arduino Error output:\n%s' % error)
print('Arduino Exit code: %s' % exit_code)
# For some reason Arduino CLI can return 256 on success
if (process.returncode != 0) and (process.returncode != 256):
success = False
if exit_code == 1:
conclusion = 'Build or Upload failed'
elif exit_code == 2:
conclusion = 'Sketch not found'
elif exit_code == 3:
conclusion = 'Invalid command line argument'
elif exit_code == 4:
conclusion =\
'Preference passed to "get-pref" flag does not exist'
else:
conclusion = 'Unexpected exit error code: %s' % exit_code
return success, conclusion, out, error, exit_code
