def setUp(self):
"""
Setup the device.
"""
if 'ppc' not in platform.processor():
self.cancel("Processor is not ppc64")
if os.path.exists('/proc/device-tree/bmc'):
self.cancel("Test Unsupported! on this platform")
if cpu._list_matches(
open('/proc/cpuinfo').readlines(), 'platform\t: pSeries\n'):
self.power_vm = True
for mdl in ['rpaphp', 'rpadlpar_io']:
if not linux_modules.module_is_loaded(mdl):
linux_modules.load_module(mdl)
elif cpu._list_matches(
open('/proc/cpuinfo').readlines(), 'platform\t: PowerNV\n'):
self.power_vm = False
if not linux_modules.module_is_loaded("pnv_php"):
linux_modules.load_module("pnv_php")
self.dic = {}
self.device = self.params.get('pci_devices', default=' ').split(" ")
self.count = int(self.params.get('count', default='1'))
if not self.device:
self.cancel("PCI_address not given")
smm = SoftwareManager()
if not smm.check_installed("pciutils") and not smm.install("pciutils"):
self.cancel("pciutils package is need to test")
for pci_addr in self.device:
if not os.path.isdir('/sys/bus/pci/devices/%s' % pci_addr):
self.cancel("%s not present in device path" % pci_addr)
slot = self.get_slot(pci_addr)
if not slot:
self.cancel("slot number not available for: %s" % pci_addr)
self.dic[pci_addr] = slot
def setUp(self):
"""
Check pre-requisites before running sensors command
Testcase should be executed only on bare-metal environment.
"""
s_mg = SoftwareManager()
d_distro = distro.detect()
if d_distro.name == "Ubuntu":
if not s_mg.check_installed("lm-sensors") and not s_mg.install(
"lm-sensors"):
self.cancel('Need sensors to run the test')
elif d_distro.name == "SuSE":
if not s_mg.check_installed("sensors") and not s_mg.install(
"sensors"):
self.cancel('Need sensors to run the test')
else:
if not s_mg.check_installed("lm_sensors") and not s_mg.install(
"lm_sensors"):
self.cancel('Need sensors to run the test')
if d_distro.arch in ["ppc64", "ppc64le"]:
if not cpu._list_matches(
open('/proc/cpuinfo').readlines(),
'platform\t: PowerNV\n'):
self.cancel(
'sensors test is applicable to bare-metal environment.')
config_check = linux_modules.check_kernel_config(
'CONFIG_SENSORS_IBMPOWERNV')
if config_check == 0:
self.cancel('Config is not set')
elif config_check == 1:
if linux_modules.load_module('ibmpowernv'):
if linux_modules.module_is_loaded('ibmpowernv'):
self.log.info('Module Loaded Successfully')
else:
self.cancel('Module Loading Failed')
else:
self.log.info('Module is Built In')
if not d_distro.name == "Ubuntu":
try:
process.run('service lm_sensors stop', sudo=True)
process.run('service lm_sensors start', sudo=True)
process.run('service lm_sensors status', sudo=True)
except process.CmdError:
self.error(
'Starting Service Failed. Make sure module is loaded')
cmd = "yes | sudo sensors-detect"
det_op = process.run(cmd, shell=True, ignore_status=True).stdout
if 'no sensors were detected' in det_op:
self.cancel('No sensors found to test !')
def setUp(self):
"""
Setup the device.
"""
if 'ppc' not in platform.processor():
self.cancel("Processor is not ppc64")
if os.path.exists('/proc/device-tree/bmc'):
self.cancel("Test Unsupported! on this platform")
cmd = "cat /proc/cpuinfo"
if cpu._list_matches(open('/proc/cpuinfo').readlines(),
'platform\t: pSeries\n'):
PowerVM = True
for mdl in ['rpaphp', 'rpadlpar_io']:
if not linux_modules.module_is_loaded(mdl):
linux_modules.load_module(mdl)
elif cpu._list_matches(open('/proc/cpuinfo').readlines(),
'platform\t: PowerNV\n'):
PowerVM = False
if not linux_modules.module_is_loaded("pnv_php"):
linux_modules.load_module("pnv_php")
self.return_code = 0
self.device = self.params.get('pci_device', default=' ')
self.num_of_hotplug = int(self.params.get('num_of_hotplug', default='1'))
if not os.path.isdir('/sys/bus/pci/devices/%s' % self.device):
self.cancel("PCI device given does not exist")
if PowerVM:
devspec = genio.read_file("/sys/bus/pci/devices/%s/devspec"
% self.device)
self.slot = genio.read_file("/proc/device-tree/%s/ibm,loc-code"
% devspec)
self.slot = re.match(r'((\w+)[\.])+(\w+)-P(\d+)-C(\d+)|Slot(\d+)',
self.slot).group()
else:
self.slot = pci.get_pci_prop(self.device, "PhySlot")
if not os.path.isdir('/sys/bus/pci/slots/%s' % self.slot):
self.cancel("%s Slot not available" % self.slot)
if not os.path.exists('/sys/bus/pci/slots/%s/power' % self.slot):
self.cancel("%s Slot does not support hotplug" % self.slot)
def setUp(self):
"""
Setup the device.
"""
cmd = "uname -p"
if 'ppc' not in process.system_output(cmd, ignore_status=True):
self.cancel("Processor is not ppc64")
cmd = "cat /proc/cpuinfo"
if cpu._list_matches(open('/proc/cpuinfo').readlines(),
'platform\t: pSeries\n'):
PowerVM = True
for mdl in ['rpaphp', 'rpadlpar_io']:
if not linux_modules.module_is_loaded(mdl):
linux_modules.load_module(mdl)
elif cpu._list_matches(open('/proc/cpuinfo').readlines(),
'platform\t: PowerNV\n'):
PowerVM = False
if not linux_modules.module_is_loaded("pnv_php"):
linux_modules.load_module("pnv_php")
self.return_code = 0
self.device = self.params.get('pci_device', default=' ')
self.num_of_hotplug = int(self.params.get('num_of_hotplug',
default='1'))
if not os.path.isdir('/sys/bus/pci/devices/%s' % self.device):
self.cancel("PCI device given does not exist")
if PowerVM:
devspec = genio.read_file("/sys/bus/pci/devices/%s/devspec"
% self.device)
self.slot = genio.read_file("/proc/device-tree/%s/ibm,loc-code"
% devspec)
self.slot = re.match(r'((\w+)[\.])+(\w+)-P(\d+)-C(\d+)|Slot(\d+)',
self.slot).group()
else:
self.slot = pci.get_pci_prop(self.device, "PhySlot")
if not os.path.isdir('/sys/bus/pci/slots/%s' % self.slot):
self.cancel("%s Slot not available" % self.slot)
if not os.path.exists('/sys/bus/pci/slots/%s/power' % self.slot):
self.cancel("%s Slot does not support hotplug" % self.slot)
def setUp(self):
"""
Check pre-requisites before running sensors command
Testcase should be executed only on bare-metal environment.
"""
s_mg = SoftwareManager()
d_distro = distro.detect()
if d_distro.name == "Ubuntu":
if not s_mg.check_installed("lm-sensors") and not s_mg.install(
"lm-sensors"):
self.cancel('Need sensors to run the test')
elif d_distro.name == "SuSE":
if not s_mg.check_installed("sensors") and not s_mg.install(
"sensors"):
self.cancel('Need sensors to run the test')
else:
if not s_mg.check_installed("lm_sensors") and not s_mg.install(
"lm_sensors"):
self.cancel('Need sensors to run the test')
if d_distro.arch in ["ppc64", "ppc64le"]:
if not cpu._list_matches(open('/proc/cpuinfo').readlines(),
'platform\t: PowerNV\n'):
self.cancel(
'sensors test is applicable to bare-metal environment.')
config_check = linux_modules.check_kernel_config(
'CONFIG_SENSORS_IBMPOWERNV')
if config_check == 0:
self.cancel('Config is not set')
elif config_check == 1:
if linux_modules.load_module('ibmpowernv'):
if linux_modules.module_is_loaded('ibmpowernv'):
self.log.info('Module Loaded Successfully')
else:
self.cancel('Module Loading Failed')
else:
self.log.info('Module is Built In')
if not d_distro.name == "Ubuntu":
try:
process.run('service lm_sensors stop', sudo=True)
process.run('service lm_sensors start', sudo=True)
process.run('service lm_sensors status', sudo=True)
except process.CmdError:
self.error(
'Starting Service Failed. Make sure module is loaded')
cmd = "yes | sudo sensors-detect"
det_op = process.run(cmd, shell=True, ignore_status=True).stdout
if 'no sensors were detected' in det_op:
self.cancel('No sensors found to test !')
