class SoundBlasterHardwareOptions(QWidget):
def __init__(self, parent, name="SoundBlasterHardwareOptions"):
QWidget.__init__(self, parent, name)
numrows = 2
numcols = 3
margin = 0
space = 1
self.grid = QGridLayout(self, numrows, numcols, margin, space, "SoundBlasterHardwareOptionsLayout")
self.base_box = ConfigSpinWidget(self, "I/O address", max=1000)
self.grid.addWidget(self.base_box, 0, 0)
self.irq_box = ConfigSpinWidget(self, "IRQ", min=3, max=15)
self.grid.addWidget(self.irq_box, 1, 0)
self.dma_box = ConfigSpinWidget(self, "DMA")
self.grid.addWidget(self.dma_box, 0, 2)
self.hdma_box = ConfigSpinWidget(self, "High DMA")
self.grid.addWidget(self.hdma_box, 1, 2)
def get_config_options(self):
opts = {}
opts["sbbase"] = self.base_box.get_config_option()
opts["irq"] = self.irq_box.get_config_option()
opts["dma"] = self.dma_box.get_config_option()
opts["hdma"] = self.hdma_box.get_config_option()
return opts
def set_config_options(self, opts):
self.base_box.set_config_option(opts["sbbase"])
self.irq_box.set_config_option(opts["irq"])
self.dma_box.set_config_option(opts["dma"])
self.hdma_box.set_config_option(opts["hdma"])
class GusHardwareOptions(QWidget):
def __init__(self, parent, name="GusHardwareOptions"):
QWidget.__init__(self, parent, name)
numrows = 2
numcols = 3
margin = 0
space = 1
self.grid = QGridLayout(self, numrows, numcols, margin, space, "GusHardwareOptionsLayout")
self.base_box = ConfigSpinWidget(self, "I/O address", max=1000)
self.grid.addWidget(self.base_box, 0, 0)
self.irq1_box = ConfigSpinWidget(self, "IRQ 1", min=3, max=15)
self.grid.addWidget(self.irq1_box, 0, 1)
self.irq2_box = ConfigSpinWidget(self, "IRQ 2", min=3, max=15)
self.grid.addWidget(self.irq2_box, 1, 1)
self.dma1_box = ConfigSpinWidget(self, "DMA 1")
self.grid.addWidget(self.dma1_box, 0, 2)
self.dma2_box = ConfigSpinWidget(self, "DMA 2")
self.grid.addWidget(self.dma2_box, 1, 2)
def get_config_options(self):
opts = {}
opts["gusbase"] = self.base_box.get_config_option()
opts["irq1"] = self.irq1_box.get_config_option()
opts["irq2"] = self.irq2_box.get_config_option()
opts["dma1"] = self.dma1_box.get_config_option()
opts["dma2"] = self.dma2_box.get_config_option()
return opts
def set_config_options(self, opts):
self.base_box.set_config_option(opts["gusbase"])
self.irq1_box.set_config_option(opts["irq1"])
self.irq2_box.set_config_option(opts["irq2"])
self.dma1_box.set_config_option(opts["dma1"])
self.dma2_box.set_config_option(opts["dma2"])
class SDLConfigWidget(BaseDosboxConfigWidget):
def __init__(self, parent, name='SDLConfigWidget'):
BaseDosboxConfigWidget.__init__(self, parent, name=name)
numrows = 2
numcols = 2
margin = 0
space = 1
self.grid = QGridLayout(self, numrows, numcols,
margin, space, 'SDLConfigWidgetLayout')
self.myconfig = self.app.myconfig
res = self.myconfig.get('dosbox_profiles', 'default_resolutions')
resolutions = [r.strip() for r in res.split(',')]
self._default_resolutions = ['original'] + resolutions
self._default_outputs = ['surface', 'overlay', 'opengl', 'openglnb', 'ddraw']
self._default_priorities = ['lowest', 'lower', 'normal', 'higher', 'highest']
self.new_stuff()
self.localconfig.add_section('sdl')
def new_stuff(self):
# fullscreen group
self.fullscreen_groupbox = VerticalGroupBox(self, 'Fullscreen Options')
self.fullscreen_groupbox.setColumns(2)
self.grid.addWidget(self.fullscreen_groupbox, 0, 0)
self.fullscreen_check = QCheckBox(self.fullscreen_groupbox)
self.fullscreen_check.setText('fullscreen')
self.tooltips.add(self.fullscreen_check, "Run dosbox in fullscreen")
self.fulldouble_check = QCheckBox(self.fullscreen_groupbox)
self.fulldouble_check.setText('full&double')
self.tooltips.add(self.fulldouble_check, "Use double buffering in fullscreen")
# resolution group
self.resolution_groupbox = VerticalGroupBox(self, 'Resolution Options')
self.resolution_groupbox.setColumns(4)
self.grid.addWidget(self.resolution_groupbox, 0, 1)
self.fullresolution_box = ConfigComboBoxWidget(self.resolution_groupbox,
'fullscreen resolution', self._default_resolutions)
self.tooltips.add(self.fullresolution_box, "Resolution when running in fullscreen")
self.windowresolution_box = ConfigComboBoxWidget(self.resolution_groupbox,
'windowed resolution', self._default_resolutions)
self.tooltips.add(self.windowresolution_box, "Resolution when running in a window")
# misc group
self.misc_groupbox = VerticalGroupBox(self, 'Misc. Options')
self.misc_groupbox.setColumns(3)
self.grid.addWidget(self.misc_groupbox, 1, 0)
self.output_box = ConfigComboBoxWidget(self.misc_groupbox,
'Output', self._default_outputs)
self.waitonerror_check = QCheckBox(self.misc_groupbox)
self.waitonerror_check.setText('Wait on error')
self.tooltips.add(self.waitonerror_check,
"Wait before closing window if dosbox has an error")
# mouse group
self.mouse_groupbox = VerticalGroupBox(self, 'Mouse Options')
self.mouse_groupbox.setColumns(3)
self.grid.addWidget(self.mouse_groupbox, 1, 1)
self.autolock_check = QCheckBox(self.mouse_groupbox)
self.autolock_check.setText('autolock')
self.tooltips.add(self.autolock_check,
"Clicking in the dosbox window automatically locks mouse")
self.sensitivity_box = ConfigSpinWidget(self.mouse_groupbox,
'Mouse sensitivity', min=1, max=100,
suffix='%')
self.tooltips.add(self.sensitivity_box, "How sensitive the mouse is")
# keyboard group
self.keyboard_groupbox = VerticalGroupBox(self, 'Keyboard Options')
self.keyboard_groupbox.setColumns(3)
# add to row 2, first two columns
self.grid.addMultiCellWidget(self.keyboard_groupbox, 2, 2, 0, 1)
self.usescancodes_check = QCheckBox(self.keyboard_groupbox)
self.usescancodes_check.setText('usescancodes')
self.tooltips.add(self.usescancodes_check,
"Avoid use of symkeys")
self.mapper_entry = ConfigKURLSelectWidget(self.keyboard_groupbox,
'mapperfile (File used for key mappings)')
self.tooltips.add(self.mapper_entry, "File used for key mappings")
# priority group
self.priority_groupbox = QGroupBox(self)
self.priority_groupbox.setTitle('Priority Options')
self.priority_groupbox.setColumns(2)
#self.grid.addWidget(self.priority_groupbox, 3, 0)
# add to row 3 first two columns
self.grid.addMultiCellWidget(self.priority_groupbox, 3, 3, 0, 1)
self.focused_box = ConfigComboBoxWidget(self.priority_groupbox,
'focused', self._default_priorities)
self.tooltips.add(self.focused_box, "Priority level for dosbox when focused")
self.unfocused_box = ConfigComboBoxWidget(self.priority_groupbox,
'unfocused', self._default_priorities)
self.tooltips.add(self.unfocused_box,
"Priority level for dosbox when unfocused or minimized")
def set_config(self, configobj):
self.mainconfig = configobj
# some assignments to help with typing
sdl = 'sdl'
cfg = self.mainconfig
# set the various config widgets
fullscreen = cfg.getboolean(sdl, 'fullscreen')
self.fullscreen_check.setChecked(fullscreen)
fulldouble = cfg.getboolean(sdl, 'fulldouble')
self.fulldouble_check.setChecked(fulldouble)
fullresolution = cfg.get(sdl, 'fullresolution')
self.fullresolution_box.set_config_option(fullresolution)
windowresolution = cfg.get(sdl, 'windowresolution')
self.windowresolution_box.set_config_option(windowresolution)
output = cfg.get(sdl, 'output')
self.output_box.set_config_option(output)
waitonerror = cfg.getboolean(sdl, 'waitonerror')
self.waitonerror_check.setChecked(waitonerror)
autolock = cfg.getboolean(sdl, 'autolock')
self.autolock_check.setChecked(autolock)
sensitivity = cfg.getint(sdl, 'sensitivity')
self.sensitivity_box.set_config_option(sensitivity)
usescancodes = cfg.getboolean(sdl, 'usescancodes')
self.usescancodes_check.setChecked(usescancodes)
mapperfile = cfg.get(sdl, 'mapperfile')
self.mapper_entry.set_config_option(mapperfile)
priorities = cfg.get(sdl, 'priority')
focused, unfocused = [p.strip() for p in priorities.split(',')]
self.focused_box.set_config_option(focused)
self.unfocused_box.set_config_option(unfocused)
def get_config(self):
# some assignments to help with typing
sdl = 'sdl'
cfg = self.localconfig
# get config values from the various widgets
fullscreen = self._get_bool_for_config(self.fullscreen_check)
cfg.set(sdl, 'fullscreen', fullscreen)
fulldouble = self._get_bool_for_config(self.fulldouble_check)
cfg.set(sdl, 'fulldouble', fulldouble)
fullresolution = self.fullresolution_box.get_config_option()
cfg.set(sdl, 'fullresolution', fullresolution)
windowresolution = self.windowresolution_box.get_config_option()
cfg.set(sdl, 'windowresolution', windowresolution)
output = self.output_box.get_config_option()
cfg.set(sdl, 'output', output)
waitonerror = self._get_bool_for_config(self.waitonerror_check)
cfg.set(sdl, 'waitonerror', waitonerror)
autolock = self._get_bool_for_config(self.autolock_check)
cfg.set(sdl, 'autolock', autolock)
sensitivity = self.sensitivity_box.get_config_option()
cfg.set(sdl, 'sensitivity', sensitivity)
usescancodes = self._get_bool_for_config(self.usescancodes_check)
cfg.set(sdl, 'usescancodes', usescancodes)
mapperfile = self.mapper_entry.get_config_option()
cfg.set(sdl, 'mapperfile', mapperfile)
# priorities part
focused = self.focused_box.get_config_option()
unfocused = self.unfocused_box.get_config_option()
priority = ','.join([focused, unfocused])
cfg.set(sdl, 'priority', priority)
return self.localconfig
class SoundConfigWidget(BaseDosboxConfigWidget):
def __init__(self, parent, name="SDLConfigWidget"):
BaseDosboxConfigWidget.__init__(self, parent, name=name)
numrows = 2
numcols = 3
margin = 10
space = 7
self._default_mpu401_types = ["none", "uart", "intelligent"]
self._default_midi_devices = ["default", "none", "alsa", "oss", "coreaudio", "win32"]
self._default_sbtypes = ["none", "sb1", "sb2", "sbpro1", "sbpro2", "sb16"]
self._default_tandyopts = ["auto", "on", "off"]
self.grid = QGridLayout(self, numrows, numcols, margin, space, "SDLConfigWidgetLayout")
for section in ["mixer", "midi", "sblaster", "gus", "speaker"]:
self.localconfig.add_section(section)
# mixer group
self.mixer_groupbox = VerticalGroupBox(self, "Mixer Options")
self.mixer_groupbox.setColumns(4)
self.grid.addWidget(self.mixer_groupbox, 0, 0)
self.nosound_check = QCheckBox(self.mixer_groupbox)
self.nosound_check.setText("Disable sound")
self.sample_rate_box = SampleRateOption(self.mixer_groupbox, "Sample rate")
# magic number for maximum block size
self.blocksize_box = ConfigSpinWidget(
self.mixer_groupbox, "Mixer block size", min=0, max=262144, suffix=" bytes"
)
# magic number for maximum prebuffer (10 secs)
self.prebuffer_box = ConfigSpinWidget(self.mixer_groupbox, "Prebuffer", min=0, max=10000, suffix=" msec")
# midi group
self.midi_groupbox = VerticalGroupBox(self, "MIDI Options")
self.midi_groupbox.setColumns(4)
self.grid.addWidget(self.midi_groupbox, 1, 1)
self.mpu401_box = ConfigComboBoxWidget(self.midi_groupbox, "mpu401 type", self._default_mpu401_types)
self.midi_device_box = ConfigComboBoxWidget(self.midi_groupbox, "MIDI device", self._default_midi_devices)
self.midi_config_box = ConfigLineEditWidget(self.midi_groupbox, "MIDI config")
# speaker group
self.speaker_groupbox = VerticalGroupBox(self, "PC Speaker Options")
self.speaker_groupbox.setColumns(5)
self.grid.addMultiCellWidget(self.speaker_groupbox, 1, 1, 0, 0)
self.enable_speaker_check = QCheckBox(self.speaker_groupbox)
self.enable_speaker_check.setText("Enable PC speaker emulation")
self.pc_rate_box = SampleRateOption(self.speaker_groupbox, "Sample rate of PC speaker")
self.enable_tandy_box = ConfigComboBoxWidget(
self.speaker_groupbox, "Enable Tandy Sound System emulation", self._default_tandyopts
)
self.tandy_rate_box = SampleRateOption(self.speaker_groupbox, "Sample rate of Tandy Sound System")
self.enable_disney_check = QCheckBox(self.speaker_groupbox)
self.enable_disney_check.setText("Enable Disney Sound Source emulation")
# sblaster group
self.sblaster_groupbox = VerticalGroupBox(self, "SoundBlaster Options")
self.sblaster_groupbox.setColumns(2)
# self.grid.addWidget(self.sblaster_groupbox, 0, 0)
self.grid.addMultiCellWidget(self.sblaster_groupbox, 0, 0, 0, 1)
self.sbtype_box = ConfigComboBoxWidget(self.sblaster_groupbox, "SoundBlaster type", self._default_sbtypes)
self.sblaster_hwopt_groupbox = VerticalGroupBox(self.sblaster_groupbox, "SoundBlaster Hardware Options")
self.sblaster_hwopt_groupbox.setColumns(1)
self.sblaster_hwopt_box = SoundBlasterHardwareOptions(self.sblaster_hwopt_groupbox)
self.sb_mixer_check = QCheckBox(self.sblaster_groupbox)
self.sb_mixer_check.setText("SoundBlaster modifies dosbox mixer")
self.sblaster_oplopt_groupbox = VerticalGroupBox(self.sblaster_groupbox, "SoundBlaster OPL Options")
self.sblaster_oplopt_groupbox.setColumns(1)
self.sblaster_oplopt_box = SoundBlasterOPLOptions(self.sblaster_oplopt_groupbox)
# gus group
self.gus_groupbox = VerticalGroupBox(self, "Gravis Ultrasound Options")
self.gus_groupbox.setColumns(5)
# self.grid.addWidget(self.gus_groupbox, 2, 1)
self.grid.addMultiCellWidget(self.gus_groupbox, 0, 1, 2, 2)
self.enable_gus_check = QCheckBox(self.gus_groupbox)
self.enable_gus_check.setText("Enable Gravis Ultrasound emulation")
self.gus_hwopt_groupbox = VerticalGroupBox(self.gus_groupbox, "Gravis Ultrasound hardware options")
self.gus_hwopt_groupbox.setColumns(1)
self.gus_hwopt_box = GusHardwareOptions(self.gus_hwopt_groupbox)
self.gus_rate_box = SampleRateOption(self.gus_groupbox)
self.gus_ultradir_box = ConfigKURLSelectWidget(self.gus_groupbox, "GUS patches directory", filetype="dir")
def set_config(self, configobj):
self.mainconfig = configobj
# some assignments to help with typing
mixer = "mixer"
midi = "midi"
sblaster = "sblaster"
gus = "gus"
speaker = "speaker"
cfg = self.mainconfig
# set the various config widgets
# mixer section
nosound = cfg.getboolean(mixer, "nosound")
self.nosound_check.setChecked(nosound)
rate = cfg.getint(mixer, "rate")
self.sample_rate_box.set_config_option(rate)
blocksize = cfg.getint(mixer, "blocksize")
self.blocksize_box.set_config_option(blocksize)
prebuffer = cfg.getint(mixer, "prebuffer")
self.prebuffer_box.set_config_option(prebuffer)
# midi section
mpu401 = cfg.get(midi, "mpu401")
self.mpu401_box.set_config_option(mpu401)
device = cfg.get(midi, "device")
self.midi_device_box.set_config_option(device)
midi_config = cfg.get(midi, "config")
self.midi_config_box.set_config_option(midi_config)
# sblaster section
sbtype = cfg.get(sblaster, "sbtype")
self.sbtype_box.set_config_option(sbtype)
opts = {}
for opt in ["sbbase", "irq", "dma", "hdma"]:
opts[opt] = cfg.getint(sblaster, opt)
self.sblaster_hwopt_box.set_config_options(opts)
mixer = cfg.getboolean(sblaster, "mixer")
self.sb_mixer_check.setChecked(mixer)
opts = {}
opts["oplmode"] = cfg.get(sblaster, "oplmode")
opts["oplrate"] = cfg.getint(sblaster, "oplrate")
self.sblaster_oplopt_box.set_config_options(opts)
# gus section
enable_gus = cfg.getboolean(gus, "gus")
self.enable_gus_check.setChecked(enable_gus)
gusrate = cfg.getint(gus, "gusrate")
self.gus_rate_box.set_config_option(gusrate)
opts = {}
for opt in ["gusbase", "irq1", "irq2", "dma1", "dma2"]:
opts[opt] = cfg.getint(gus, opt)
self.gus_hwopt_box.set_config_options(opts)
ultradir = cfg.get(gus, "ultradir")
self.gus_ultradir_box.set_config_option(ultradir)
# speaker section
pcspeaker = cfg.getboolean(speaker, "pcspeaker")
self.enable_speaker_check.setChecked(pcspeaker)
pcrate = cfg.getint(speaker, "pcrate")
self.pc_rate_box.set_config_option(pcrate)
tandy = cfg.get(speaker, "tandy")
self.enable_tandy_box.set_config_option(tandy)
tandyrate = cfg.getint(speaker, "tandyrate")
self.tandy_rate_box.set_config_option(tandyrate)
disney = cfg.getboolean(speaker, "disney")
self.enable_disney_check.setChecked(disney)
def get_config(self):
# some assignments to help with typing
mixer = "mixer"
midi = "midi"
sblaster = "sblaster"
gus = "gus"
speaker = "speaker"
cfg = self.localconfig
# get config values from the various widgets
# mixer section
nosound = self._get_bool_for_config(self.nosound_check)
cfg.set(mixer, "nosound", nosound)
rate = self.sample_rate_box.get_config_option()
cfg.set(mixer, "rate", rate)
blocksize = self.blocksize_box.get_config_option()
cfg.set(mixer, "blocksize", blocksize)
prebuffer = self.prebuffer_box.get_config_option()
cfg.set(mixer, "prebuffer", prebuffer)
# midi section
mpu401 = self.mpu401_box.get_config_option()
cfg.set(midi, "mpu401", mpu401)
device = self.midi_device_box.get_config_option()
cfg.set(midi, "device", device)
midi_config = self.midi_config_box.get_config_option()
cfg.set(midi, "config", midi_config)
# sblaster section
sbtype = self.sbtype_box.get_config_option()
cfg.set(sblaster, "sbtype", sbtype)
opts = self.sblaster_hwopt_box.get_config_options()
for opt, value in opts.items():
cfg.set(sblaster, opt, value)
mixer = self._get_bool_for_config(self.sb_mixer_check)
cfg.set(sblaster, "mixer", mixer)
opts = self.sblaster_oplopt_box.get_config_options()
for opt, value in opts.items():
cfg.set(sblaster, opt, value)
# gus section
enable_gus = self._get_bool_for_config(self.enable_gus_check)
cfg.set(gus, "gus", enable_gus)
gusrate = self.gus_rate_box.get_config_option()
cfg.set(gus, "gusrate", gusrate)
opts = self.gus_hwopt_box.get_config_options()
for opt, value in opts.items():
cfg.set(gus, opt, value)
ultradir = self.gus_ultradir_box.get_config_option()
cfg.set(gus, "ultradir", ultradir)
# speaker section
pcspeaker = self._get_bool_for_config(self.enable_speaker_check)
cfg.set(speaker, "pcspeaker", pcspeaker)
pcrate = self.pc_rate_box.get_config_option()
cfg.set(speaker, "pcrate", pcrate)
tandy = self.enable_tandy_box.get_config_option()
cfg.set(speaker, "tandy", tandy)
tandyrate = self.tandy_rate_box.get_config_option()
cfg.set(speaker, "tandyrate", tandyrate)
disney = self._get_bool_for_config(self.enable_disney_check)
cfg.set(speaker, "disney", disney)
# done
return self.localconfig
class MachineConfigWidget(BaseDosboxConfigWidget):
def __init__(self, parent, name="SDLConfigWidget"):
BaseDosboxConfigWidget.__init__(self, parent, name=name)
numrows = 2
numcols = 3
margin = 10
space = 7
self._default_machines = ["vga", "cga", "tandy", "pcjr", "hercules"]
self._default_scalers = [
"none",
"normal2x",
"normal3x",
"advmame2x",
"advmame3x",
"advinterp2x",
"advinterp3x",
"tv2x",
"tv3x",
"rgb2x",
"rgb3x",
"scan2x",
"scan3x",
]
self._default_cores = ["simple", "normal", "full", "dynamic"]
for section in ["render", "cpu", "dosbox", "dos", "bios", "serial", "ipx"]:
self.localconfig.add_section(section)
self.grid = QGridLayout(self, numrows, numcols, margin, space, "MachineConfigWidgetLayout")
# render group
self.render_groupbox = VerticalGroupBox(self, "Render Options")
self.render_groupbox.setColumns(2)
self.grid.addWidget(self.render_groupbox, 0, 1)
self.frameskip_box = ConfigSpinWidget(self.render_groupbox, "Frame skip", suffix=" frames")
self.tooltips.add(self.frameskip_box, "How many frames to skip.")
self.aspect_check = QCheckBox(self.render_groupbox)
self.aspect_check.setText("Aspect correction")
self.tooltips.add(self.aspect_check, "Try to keep aspect ratio.")
self.scaler_box = ConfigComboBoxWidget(self.render_groupbox, "Scaler", self._default_scalers)
self.tooltips.add(self.scaler_box, "Select size and effect of video")
# cpu group
# make a big number for cycles that should never be needed
cyclemax = int(1e6)
self.cpu_groupbox = VerticalGroupBox(self, "CPU Options")
self.cpu_groupbox.setColumns(2)
self.grid.addWidget(self.cpu_groupbox, 0, 0)
self.core_box = ConfigComboBoxWidget(self.cpu_groupbox, "Core", self._default_cores)
self.tooltips.add(self.core_box, "Select type of cpu core")
self.cycles_box = ConfigSpinWidget(self.cpu_groupbox, "Cycles", max=cyclemax, suffix=" cycles")
tt = "The number of cycles to attempt to perform in a second"
self.tooltips.add(self.cycles_box, tt)
self.cycleup_box = ConfigSpinWidget(self.cpu_groupbox, "Cycle up increment", max=cyclemax, suffix=" cycles")
self.cycledown_box = ConfigSpinWidget(self.cpu_groupbox, "Cycle down increment", max=cyclemax, suffix=" cycles")
# dosbox group
self.dosbox_groupbox = VerticalGroupBox(self, "Dosbox Options")
self.dosbox_groupbox.setColumns(3)
# row 1, first two columns
# self.grid.addMultiCellWidget(self.dosbox_groupbox, 1, 1, 0, 1)
self.grid.addWidget(self.dosbox_groupbox, 1, 0)
self.language_entry = ConfigKURLSelectWidget(self.dosbox_groupbox, "Language file")
self.memsize_box = ConfigSpinWidget(self.dosbox_groupbox, "Memory size", suffix="MB")
self.captures_entry = ConfigKURLSelectWidget(self.dosbox_groupbox, "Captures directory", filetype="dir")
# dos group
self.dos_groupbox = VerticalGroupBox(self, "Dos Options")
self.dos_groupbox.setColumns(3)
self.grid.addWidget(self.dos_groupbox, 1, 1)
self.xms_check = QCheckBox(self.dos_groupbox)
self.xms_check.setText("Enable XMS support")
self.ems_check = QCheckBox(self.dos_groupbox)
self.ems_check.setText("Enable EMS support")
self.umb_check = QCheckBox(self.dos_groupbox)
self.umb_check.setText("Enable UMB support")
# peripheral options
self.peripheral_groupbox = VerticalGroupBox(self, "Peripheral Options")
self.peripheral_groupbox.setColumns(1)
# self.grid.addWidget(self.peripheral_groupbox, 2, 0)
self.grid.addMultiCellWidget(self.peripheral_groupbox, 2, 2, 0, 2)
# peripherals in bios section
self.bios_groupbox = VerticalGroupBox(self.peripheral_groupbox, "Bios Options")
self.bios_groupbox.setColumns(1)
joystick_types = ["none", "2axis", "4axis", "fcs", "ch"]
self.joysticktype_box = ConfigComboBoxWidget(self.bios_groupbox, "Joystick type", joystick_types)
# peripherals in serial section
self.serial_groupbox = VerticalGroupBox(self.peripheral_groupbox, "Serial Options")
self.serial_groupbox.setColumns(2)
self.serial_warning_lbl = QLabel("These options are", self.serial_groupbox)
self.serial_warning_lbl2 = QLabel("not fully suported yet.", self.serial_groupbox)
self.serial1_box = SerialPortOption(self.serial_groupbox, "Serial 1")
self.serial2_box = SerialPortOption(self.serial_groupbox, "Serial 2")
self.serial3_box = SerialPortOption(self.serial_groupbox, "Serial 3")
self.serial4_box = SerialPortOption(self.serial_groupbox, "Serial 4")
# ipx options
self.ipx_groupbox = VerticalGroupBox(self, "IPX Options")
self.ipx_groupbox.setColumns(1)
self.grid.addWidget(self.ipx_groupbox, 1, 2)
self.ipx_check = QCheckBox(self.ipx_groupbox)
self.ipx_check.setText("Enable ipx over UDP/IP emulation")
def set_config(self, configobj):
self.mainconfig = configobj
# some assignments to help with typing
render = "render"
cpu = "cpu"
dosbox = "dosbox"
dos = "dos"
bios = "bios"
serial = "serial"
ipx = "ipx"
cfg = self.mainconfig
# set the various config widgets
# render section
frameskip = cfg.getint(render, "frameskip")
self.frameskip_box.set_config_option(frameskip)
aspect = cfg.getboolean(render, "aspect")
self.aspect_check.setChecked(aspect)
scaler = cfg.get(render, "scaler")
self.scaler_box.set_config_option(scaler)
# cpu section
core = cfg.get(cpu, "core")
self.core_box.set_config_option(core)
cycles = cfg.getint(cpu, "cycles")
self.cycles_box.set_config_option(cycles)
cycleup = cfg.getint(cpu, "cycleup")
self.cycleup_box.set_config_option(cycleup)
cycledown = cfg.getint(cpu, "cycledown")
self.cycledown_box.set_config_option(cycledown)
# dosbox section
language = cfg.get(dosbox, "language")
self.language_entry.set_config_option(language)
memsize = cfg.getint(dosbox, "memsize")
self.memsize_box.set_config_option(memsize)
captures = cfg.get(dosbox, "captures")
self.captures_entry.set_config_option(captures)
# dos section
xms = cfg.getboolean(dos, "xms")
self.xms_check.setChecked(xms)
ems = cfg.getboolean(dos, "ems")
self.ems_check.setChecked(ems)
umb = cfg.getboolean(dos, "umb")
self.umb_check.setChecked(umb)
# bios section
joysticktype = cfg.get(bios, "joysticktype")
self.joysticktype_box.set_config_option(joysticktype)
# serial section
serial1 = cfg.get(serial, "serial1")
self.serial1_box.set_config_option(serial1)
serial2 = cfg.get(serial, "serial2")
self.serial2_box.set_config_option(serial2)
serial3 = cfg.get(serial, "serial3")
self.serial3_box.set_config_option(serial3)
serial4 = cfg.get(serial, "serial4")
self.serial4_box.set_config_option(serial4)
# ipx section
ipxopt = cfg.getboolean(ipx, ipx)
self.ipx_check.setChecked(ipxopt)
def get_config(self):
# some assignments to help with typing
render = "render"
cpu = "cpu"
dosbox = "dosbox"
dos = "dos"
bios = "bios"
serial = "serial"
ipx = "ipx"
cfg = self.localconfig
# get config values from the various widgets
# render section
frameskip = self.frameskip_box.get_config_option()
cfg.set(render, "frameskip", frameskip)
aspect = self._get_bool_for_config(self.aspect_check)
cfg.set(render, "aspect", aspect)
scaler = self.scaler_box.get_config_option()
cfg.set(render, "scaler", scaler)
# cpu section
core = self.core_box.get_config_option()
cfg.set(cpu, "core", core)
cycles = self.cycles_box.get_config_option()
cfg.set(cpu, "cycles", cycles)
cycleup = self.cycleup_box.get_config_option()
cfg.set(cpu, "cycleup", cycleup)
cycledown = self.cycledown_box.get_config_option()
cfg.set(cpu, "cycledown", cycledown)
# dosbox section
language = self.language_entry.get_config_option()
cfg.set(dosbox, "language", language)
memsize = self.memsize_box.get_config_option()
cfg.set(dosbox, "memsize", memsize)
captures = self.captures_entry.get_config_option()
cfg.set(dosbox, "captures", captures)
# dos section
xms = self._get_bool_for_config(self.xms_check)
cfg.set(dos, "xms", xms)
ems = self._get_bool_for_config(self.ems_check)
cfg.set(dos, "ems", ems)
umb = self._get_bool_for_config(self.umb_check)
cfg.set(dos, "umb", umb)
# bios section
joysticktype = self.joysticktype_box.get_config_option()
cfg.set(bios, "joysticktype", joysticktype)
# serial section
serial1 = self.serial1_box.get_config_option()
cfg.set(serial, "serial1", serial1)
serial2 = self.serial2_box.get_config_option()
cfg.set(serial, "serial2", serial2)
serial3 = self.serial3_box.get_config_option()
cfg.set(serial, "serial3", serial3)
serial4 = self.serial4_box.get_config_option()
cfg.set(serial, "serial4", serial4)
# ipx section
ipxopt = self._get_bool_for_config(self.ipx_check)
cfg.set(ipx, ipx, ipxopt)
return self.localconfig
class MachineConfigWidget(BaseDosboxConfigWidget):
def __init__(self, parent, name='SDLConfigWidget'):
BaseDosboxConfigWidget.__init__(self, parent, name=name)
numrows = 2
numcols = 3
margin = 10
space = 7
self._default_machines = ['vga', 'cga', 'tandy', 'pcjr', 'hercules']
self._default_scalers = ['none', 'normal2x', 'normal3x', 'advmame2x', 'advmame3x',
'advinterp2x', 'advinterp3x', 'tv2x', 'tv3x',
'rgb2x', 'rgb3x', 'scan2x', 'scan3x']
self._default_cores = ['simple', 'normal', 'full', 'dynamic', 'auto']
for section in ['render', 'cpu', 'dosbox', 'dos', 'bios', 'serial', 'ipx']:
self.localconfig.add_section(section)
self.grid = QGridLayout(self, numrows, numcols,
margin, space, 'MachineConfigWidgetLayout')
# render group
self.render_groupbox = VerticalGroupBox(self, 'Render Options')
self.render_groupbox.setColumns(2)
self.grid.addWidget(self.render_groupbox, 0, 1)
self.frameskip_box = ConfigSpinWidget(self.render_groupbox,
'Frame skip', suffix=' frames')
self.tooltips.add(self.frameskip_box, 'How many frames to skip.')
self.aspect_check = QCheckBox(self.render_groupbox)
self.aspect_check.setText('Aspect correction')
self.tooltips.add(self.aspect_check, 'Try to keep aspect ratio.')
self.scaler_box = ConfigComboBoxWidget(self.render_groupbox,
'Scaler', self._default_scalers)
self.tooltips.add(self.scaler_box, 'Select size and effect of video')
# cpu group
# make a big number for cycles that should never be needed
cyclemax = int(1e6)
self.cpu_groupbox = VerticalGroupBox(self, 'CPU Options')
self.cpu_groupbox.setColumns(2)
self.grid.addWidget(self.cpu_groupbox, 0, 0)
self.core_box = ConfigComboBoxWidget(self.cpu_groupbox,
'Core', self._default_cores)
self.tooltips.add(self.core_box, 'Select type of cpu core')
self.cycles_box = ConfigSpinWidget(self.cpu_groupbox,
'Cycles', max=cyclemax, suffix=' cycles')
tt = 'The number of cycles to attempt to perform in a second'
self.tooltips.add(self.cycles_box, tt)
self.cycleup_box = ConfigSpinWidget(self.cpu_groupbox,
'Cycle up increment', max=cyclemax,
suffix=' cycles')
self.cycledown_box = ConfigSpinWidget(self.cpu_groupbox,
'Cycle down increment', max=cyclemax,
suffix=' cycles')
# dosbox group
self.dosbox_groupbox = VerticalGroupBox(self, 'Dosbox Options')
self.dosbox_groupbox.setColumns(3)
# row 1, first two columns
#self.grid.addMultiCellWidget(self.dosbox_groupbox, 1, 1, 0, 1)
self.grid.addWidget(self.dosbox_groupbox, 1, 0)
self.language_entry = ConfigKURLSelectWidget(self.dosbox_groupbox,
'Language file')
self.memsize_box = ConfigSpinWidget(self.dosbox_groupbox,
'Memory size', suffix='MB')
self.captures_entry = ConfigKURLSelectWidget(self.dosbox_groupbox,
'Captures directory', filetype='dir')
# dos group
self.dos_groupbox = VerticalGroupBox(self, 'Dos Options')
self.dos_groupbox.setColumns(3)
self.grid.addWidget(self.dos_groupbox, 1, 1)
self.xms_check = QCheckBox(self.dos_groupbox)
self.xms_check.setText('Enable XMS support')
self.ems_check = QCheckBox(self.dos_groupbox)
self.ems_check.setText('Enable EMS support')
self.umb_check = QCheckBox(self.dos_groupbox)
self.umb_check.setText('Enable UMB support')
# peripheral options
self.peripheral_groupbox = VerticalGroupBox(self, 'Peripheral Options')
self.peripheral_groupbox.setColumns(1)
#self.grid.addWidget(self.peripheral_groupbox, 2, 0)
self.grid.addMultiCellWidget(self.peripheral_groupbox, 2, 2, 0, 2)
# peripherals in bios section
self.bios_groupbox = VerticalGroupBox(self.peripheral_groupbox, 'Bios Options')
self.bios_groupbox.setColumns(1)
joystick_types = ['none', '2axis', '4axis', 'fcs', 'ch']
self.joysticktype_box = ConfigComboBoxWidget(self.bios_groupbox,
'Joystick type', joystick_types)
# peripherals in serial section
self.serial_groupbox = VerticalGroupBox(self.peripheral_groupbox, 'Serial Options')
self.serial_groupbox.setColumns(2)
self.serial_warning_lbl = QLabel('These options are',
self.serial_groupbox)
self.serial_warning_lbl2 = QLabel('not fully suported yet.', self.serial_groupbox)
self.serial1_box = SerialPortOption(self.serial_groupbox, 'Serial 1')
self.serial2_box = SerialPortOption(self.serial_groupbox, 'Serial 2')
self.serial3_box = SerialPortOption(self.serial_groupbox, 'Serial 3')
self.serial4_box = SerialPortOption(self.serial_groupbox, 'Serial 4')
# ipx options
self.ipx_groupbox = VerticalGroupBox(self, 'IPX Options')
self.ipx_groupbox.setColumns(1)
self.grid.addWidget(self.ipx_groupbox, 1, 2)
self.ipx_check = QCheckBox(self.ipx_groupbox)
self.ipx_check.setText('Enable ipx over UDP/IP emulation')
def set_config(self, configobj):
self.mainconfig = configobj
# some assignments to help with typing
render = 'render'
cpu = 'cpu'
dosbox = 'dosbox'
dos = 'dos'
bios = 'bios'
serial = 'serial'
ipx = 'ipx'
cfg = self.mainconfig
# set the various config widgets
# render section
frameskip = cfg.getint(render, 'frameskip')
self.frameskip_box.set_config_option(frameskip)
aspect = cfg.getboolean(render, 'aspect')
self.aspect_check.setChecked(aspect)
scaler = cfg.get(render, 'scaler')
self.scaler_box.set_config_option(scaler)
# cpu section
core = cfg.get(cpu, 'core')
self.core_box.set_config_option(core)
cycles = cfg.getint(cpu, 'cycles')
self.cycles_box.set_config_option(cycles)
cycleup = cfg.getint(cpu, 'cycleup')
self.cycleup_box.set_config_option(cycleup)
cycledown = cfg.getint(cpu, 'cycledown')
self.cycledown_box.set_config_option(cycledown)
# dosbox section
language = cfg.get(dosbox, 'language')
self.language_entry.set_config_option(language)
memsize = cfg.getint(dosbox, 'memsize')
self.memsize_box.set_config_option(memsize)
captures = cfg.get(dosbox, 'captures')
self.captures_entry.set_config_option(captures)
# dos section
xms = cfg.getboolean(dos, 'xms')
self.xms_check.setChecked(xms)
ems = cfg.getboolean(dos, 'ems')
self.ems_check.setChecked(ems)
umb = cfg.getboolean(dos, 'umb')
self.umb_check.setChecked(umb)
# bios section
joysticktype = cfg.get(bios, 'joysticktype')
self.joysticktype_box.set_config_option(joysticktype)
# serial section
serial1 = cfg.get(serial, 'serial1')
self.serial1_box.set_config_option(serial1)
serial2 = cfg.get(serial, 'serial2')
self.serial2_box.set_config_option(serial2)
serial3 = cfg.get(serial, 'serial3')
self.serial3_box.set_config_option(serial3)
serial4 = cfg.get(serial, 'serial4')
self.serial4_box.set_config_option(serial4)
# ipx section
ipxopt = cfg.getboolean(ipx, ipx)
self.ipx_check.setChecked(ipxopt)
def get_config(self):
# some assignments to help with typing
render = 'render'
cpu = 'cpu'
dosbox = 'dosbox'
dos = 'dos'
bios = 'bios'
serial = 'serial'
ipx = 'ipx'
cfg = self.localconfig
# get config values from the various widgets
# render section
frameskip = self.frameskip_box.get_config_option()
cfg.set(render, 'frameskip', frameskip)
aspect = self._get_bool_for_config(self.aspect_check)
cfg.set(render, 'aspect', aspect)
scaler = self.scaler_box.get_config_option()
cfg.set(render, 'scaler', scaler)
# cpu section
core = self.core_box.get_config_option()
cfg.set(cpu, 'core', core)
cycles = self.cycles_box.get_config_option()
cfg.set(cpu, 'cycles', cycles)
cycleup = self.cycleup_box.get_config_option()
cfg.set(cpu, 'cycleup', cycleup)
cycledown = self.cycledown_box.get_config_option()
cfg.set(cpu, 'cycledown', cycledown)
# dosbox section
language = self.language_entry.get_config_option()
cfg.set(dosbox, 'language', language)
memsize = self.memsize_box.get_config_option()
cfg.set(dosbox, 'memsize', memsize)
captures = self.captures_entry.get_config_option()
cfg.set(dosbox, 'captures', captures)
# dos section
xms = self._get_bool_for_config(self.xms_check)
cfg.set(dos, 'xms', xms)
ems = self._get_bool_for_config(self.ems_check)
cfg.set(dos, 'ems', ems)
umb = self._get_bool_for_config(self.umb_check)
cfg.set(dos, 'umb', umb)
# bios section
joysticktype = self.joysticktype_box.get_config_option()
cfg.set(bios, 'joysticktype', joysticktype)
# serial section
serial1 = self.serial1_box.get_config_option()
cfg.set(serial, 'serial1', serial1)
serial2 = self.serial2_box.get_config_option()
cfg.set(serial, 'serial2', serial2)
serial3 = self.serial3_box.get_config_option()
cfg.set(serial, 'serial3', serial3)
serial4 = self.serial4_box.get_config_option()
cfg.set(serial, 'serial4', serial4)
# ipx section
ipxopt = self._get_bool_for_config(self.ipx_check)
cfg.set(ipx, ipx, ipxopt)
return self.localconfig