def __init__(self, obj: dict, object_path: str, service_uuid: str,
service_handle: int):
super(BleakGATTCharacteristicBlueZDBus, self).__init__(obj)
self.__descriptors = []
self.__path = object_path
self.__service_uuid = service_uuid
self.__service_handle = service_handle
self._handle = extract_service_handle_from_path(object_path)
def _parse_msg(self, message: Message):
if message.message_type != MessageType.SIGNAL:
return
logger.debug("received D-Bus signal: {0}.{1} ({2}): {3}".format(
message.interface, message.member, message.path, message.body))
if message.member == "InterfacesAdded":
path, interfaces = message.body
if defs.GATT_SERVICE_INTERFACE in interfaces:
obj = unpack_variants(interfaces[defs.GATT_SERVICE_INTERFACE])
# if this assert fails, it means our match rules are probably wrong
assert obj["Device"] == self._device_path
self.services.add_service(BleakGATTServiceBlueZDBus(obj, path))
if defs.GATT_CHARACTERISTIC_INTERFACE in interfaces:
obj = unpack_variants(
interfaces[defs.GATT_CHARACTERISTIC_INTERFACE])
service = next(x for x in self.services.services.values()
if x.path == obj["Service"])
self.services.add_characteristic(
BleakGATTCharacteristicBlueZDBus(obj, path, service.uuid,
service.handle))
if defs.GATT_DESCRIPTOR_INTERFACE in interfaces:
obj = unpack_variants(
interfaces[defs.GATT_DESCRIPTOR_INTERFACE])
handle = extract_service_handle_from_path(
obj["Characteristic"])
characteristic = self.services.characteristics[handle]
self.services.add_descriptor(
BleakGATTDescriptorBlueZDBus(obj, path,
characteristic.uuid, handle))
elif message.member == "InterfacesRemoved":
path, interfaces = message.body
elif message.member == "PropertiesChanged":
interface, changed, _ = message.body
changed = unpack_variants(changed)
if interface == defs.GATT_CHARACTERISTIC_INTERFACE:
if message.path in self._notification_callbacks and "Value" in changed:
handle = extract_service_handle_from_path(message.path)
self._notification_callbacks[message.path](
handle, bytearray(changed["Value"]))
elif interface == defs.DEVICE_INTERFACE:
self._properties.update(changed)
if "ServicesResolved" in changed:
if changed["ServicesResolved"]:
if self._services_resolved_event:
self._services_resolved_event.set()
else:
self._services_resolved = False
if "Connected" in changed and not changed["Connected"]:
logger.debug(f"Device disconnected ({self._device_path})")
if self._disconnect_monitor_event:
self._disconnect_monitor_event.set()
self._disconnect_monitor_event = None
self._cleanup_all()
if self._disconnected_callback is not None:
self._disconnected_callback(self)
disconnecting_event = self._disconnecting_event
if disconnecting_event:
disconnecting_event.set()
async def connect(self, **kwargs) -> bool:
"""Connect to the specified GATT server.
Keyword Args:
timeout (float): Timeout for required ``BleakScanner.find_device_by_address`` call. Defaults to 10.0.
Returns:
Boolean representing connection status.
Raises:
BleakError: If the device is already connected or if the device could not be found.
BleakDBusError: If there was a D-Bus error
asyncio.TimeoutError: If the connection timed out
"""
logger.debug(
f"Connecting to device @ {self.address} with {self._adapter}")
if self.is_connected:
raise BleakError("Client is already connected")
# A Discover must have been run before connecting to any devices.
# Find the desired device before trying to connect.
timeout = kwargs.get("timeout", self._timeout)
if self._device_path is None:
device = await BleakScannerBlueZDBus.find_device_by_address(
self.address, timeout=timeout, adapter=self._adapter)
if device:
self._device_info = device.details.get("props")
self._device_path = device.details["path"]
else:
raise BleakError(
"Device with address {0} was not found.".format(
self.address))
# Create system bus
self._bus = await MessageBus(bus_type=BusType.SYSTEM,
negotiate_unix_fd=True).connect()
try:
# Add signal handlers. These monitor the device D-Bus object and
# all of its descendats (services, characteristics, descriptors).
# This we always have an up-to-date state for all of these that is
# maintained automatically in the background.
self._bus.add_message_handler(self._parse_msg)
rules = MatchRules(
interface=defs.OBJECT_MANAGER_INTERFACE,
member="InterfacesAdded",
arg0path=f"{self._device_path}/",
)
reply = await add_match(self._bus, rules)
assert_reply(reply)
rules = MatchRules(
interface=defs.OBJECT_MANAGER_INTERFACE,
member="InterfacesRemoved",
arg0path=f"{self._device_path}/",
)
reply = await add_match(self._bus, rules)
assert_reply(reply)
rules = MatchRules(
interface=defs.PROPERTIES_INTERFACE,
member="PropertiesChanged",
path_namespace=self._device_path,
)
reply = await add_match(self._bus, rules)
assert_reply(reply)
# Find the HCI device to use for scanning and get cached device properties
reply = await self._bus.call(
Message(
destination=defs.BLUEZ_SERVICE,
path="/",
member="GetManagedObjects",
interface=defs.OBJECT_MANAGER_INTERFACE,
))
assert_reply(reply)
interfaces_and_props: Dict[str, Dict[str, Variant]] = reply.body[0]
# The device may have been removed from BlueZ since the time we stopped scanning
if self._device_path not in interfaces_and_props:
# Sometimes devices can be removed from the BlueZ object manager
# before we connect to them. In this case we try using the
# org.bluez.Adapter1.ConnectDevice method instead. This method
# requires that bluetoothd is run with the --experimental flag
# and is available since BlueZ 5.49.
logger.debug(
f"org.bluez.Device1 object not found, trying org.bluez.Adapter1.ConnectDevice ({self._device_path})"
)
reply = await asyncio.wait_for(
self._bus.call(
Message(
destination=defs.BLUEZ_SERVICE,
interface=defs.ADAPTER_INTERFACE,
path=f"/org/bluez/{self._adapter}",
member="ConnectDevice",
signature="a{sv}",
body=[{
"Address":
Variant("s", self._device_info["Address"]),
"AddressType":
Variant("s", self._device_info["AddressType"]),
}],
)),
timeout,
)
# FIXME: how to cancel connection if timeout?
if (reply.message_type == MessageType.ERROR and
reply.error_name == ErrorType.UNKNOWN_METHOD.value):
logger.debug(
f"org.bluez.Adapter1.ConnectDevice not found ({self._device_path}), try enabling bluetoothd --experimental"
)
raise BleakError(
"Device with address {0} could not be found. "
"Try increasing `timeout` value or moving the device closer."
.format(self.address))
assert_reply(reply)
else:
# required interface
self._properties = unpack_variants(interfaces_and_props[
self._device_path][defs.DEVICE_INTERFACE])
# optional interfaces - services and characteristics may not
# be populated yet
for path, interfaces in interfaces_and_props.items():
if not path.startswith(self._device_path):
continue
if defs.GATT_SERVICE_INTERFACE in interfaces:
obj = unpack_variants(
interfaces[defs.GATT_SERVICE_INTERFACE])
self.services.add_service(
BleakGATTServiceBlueZDBus(obj, path))
if defs.GATT_CHARACTERISTIC_INTERFACE in interfaces:
obj = unpack_variants(
interfaces[defs.GATT_CHARACTERISTIC_INTERFACE])
service = interfaces_and_props[obj["Service"]][
defs.GATT_SERVICE_INTERFACE]
uuid = service["UUID"].value
handle = extract_service_handle_from_path(
obj["Service"])
self.services.add_characteristic(
BleakGATTCharacteristicBlueZDBus(
obj, path, uuid, handle))
if defs.GATT_DESCRIPTOR_INTERFACE in interfaces:
obj = unpack_variants(
interfaces[defs.GATT_DESCRIPTOR_INTERFACE])
characteristic = interfaces_and_props[
obj["Characteristic"]][
defs.GATT_CHARACTERISTIC_INTERFACE]
uuid = characteristic["UUID"].value
handle = extract_service_handle_from_path(
obj["Characteristic"])
self.services.add_descriptor(
BleakGATTDescriptorBlueZDBus(
obj, path, uuid, handle))
try:
reply = await asyncio.wait_for(
self._bus.call(
Message(
destination=defs.BLUEZ_SERVICE,
interface=defs.DEVICE_INTERFACE,
path=self._device_path,
member="Connect",
)),
timeout,
)
assert_reply(reply)
except BaseException:
# calling Disconnect cancels any pending connect request
try:
reply = await self._bus.call(
Message(
destination=defs.BLUEZ_SERVICE,
interface=defs.DEVICE_INTERFACE,
path=self._device_path,
member="Disconnect",
))
try:
assert_reply(reply)
except BleakDBusError as e:
# if the object no longer exists, then we know we
# are disconnected for sure, so don't need to log a
# warning about it
if e.dbus_error != ErrorType.UNKNOWN_OBJECT.value:
raise
except Exception as e:
logger.warning(
f"Failed to cancel connection ({self._device_path}): {e}"
)
raise
if self.is_connected:
logger.debug(f"Connection successful ({self._device_path})")
else:
raise BleakError(
f"Connection was not successful! ({self._device_path})")
# Create a task that runs until the device is disconnected.
self._disconnect_monitor_event = asyncio.Event()
asyncio.ensure_future(self._disconnect_monitor())
# Get all services. This means making the actual connection.
await self.get_services()
return True
except BaseException:
self._cleanup_all()
raise
def __init__(self, obj, path):
super().__init__(obj)
self.__characteristics = []
self.__path = path
self.__handle = extract_service_handle_from_path(path)