def display_both_open():
clear()
set_pixel(1, 0, 255, 0)
set_pixel(2, 0, 255, 0)
set_pixel(5, 0, 255, 0)
set_pixel(6, 0, 255, 0)
show()
def set_all(status):
if BLINKT:
blinkt.set_all(BlinktHelper.colors[status]["r"],
BlinktHelper.colors[status]["g"],
BlinktHelper.colors[status]["b"],
brightness=BlinktHelper.colors[status]["brightness"])
blinkt.show()
def set_light(position, status):
if BLINKT:
blinkt.set_pixel(position % blinkt.NUM_PIXELS,
BlinktHelper.colors[status]["r"],
BlinktHelper.colors[status]["g"],
BlinktHelper.colors[status]["b"],
brightness=BlinktHelper.colors[status]["brightness"])
blinkt.show()
def blink():
for i in range(5):
set_pixel(7, 255, 0, 0)
show()
sleep(1)
set_pixel(7, 0, 0, 0)
show()
sleep(1)
def FadeInOut(delay):
for b in range(31):
set_brightness(b/31.0)
show()
sleep(delay)
for b in range(31):
set_brightness((31-b)/31.0)
show()
sleep(delay)
def flash_op(x, rgb):
start = time.time()
while time.time() < start + REFRESH_TIME:
blinkt.set_pixel(x, *rgb, brightness=0.04)
blinkt.show()
time.sleep(1.5)
blinkt.set_pixel(x, *rgb, brightness=0.0)
blinkt.show()
time.sleep(1.5)
def display_male_closed():
clear()
set_pixel(1, 0, 255, 0)
set_pixel(2, 0, 255, 0)
set_pixel(4, 255, 0, 0)
set_pixel(5, 255, 0, 0)
set_pixel(6, 255, 0, 0)
set_pixel(7, 255, 0, 0)
show()
def display_female_closed():
print('RED/GREEN')
clear()
set_pixel(0, 255, 0, 0)
set_pixel(1, 255, 0, 0)
set_pixel(2, 255, 0, 0)
set_pixel(3, 255, 0, 0)
set_pixel(5, 0, 255, 0)
set_pixel(6, 0, 255, 0)
show()
def blink_blinkt():
for i in range(3):
for j in range(8):
set_pixel(j, 255, 0, 0)
show()
time.sleep(0.1)
for j in range(8):
set_pixel(j, 0, 0, 0)
show()
time.sleep(0.2)
def blinking_count(n,r,g,b):
for j in range (n):
for i in range(8):
set_pixel(i, r, g, b)
show()
sleep(0.5)
for i in range(8):
set_pixel(i, 0, 0, 0)
show()
sleep(0.5)
def display_unknown():
clear()
set_pixel(0, 0, 255, 255)
set_pixel(1, 0, 255, 255)
set_pixel(2, 0, 255, 255)
set_pixel(3, 0, 255, 255)
set_pixel(4, 0, 255, 255)
set_pixel(5, 0, 255, 255)
set_pixel(6, 0, 255, 255)
set_pixel(7, 0, 255, 255)
show()
def display_both_closed():
clear()
set_pixel(0, 255, 0, 0)
set_pixel(1, 255, 0, 0)
set_pixel(2, 255, 0, 0)
set_pixel(3, 255, 0, 0)
set_pixel(4, 255, 0, 0)
set_pixel(5, 255, 0, 0)
set_pixel(6, 255, 0, 0)
set_pixel(7, 255, 0, 0)
show()
def show_graph(v, r, g, b):
v *= 8
for x in range(8):
if v < 0:
r, g, b = 0, 0, 0
else:
r, g, b = [int(min(v,1.0) * c) for c in [r,g,b]]
set_pixel(x, r, g, b)
v -= 1
show()
def display( intensity = 0.5, threshold = 50, wait = 0.5 ) :
pixels = 8 * [ 0.0, ]
while True :
load = max( [ psutil.cpu_percent(), psutil.virtual_memory().percent ] )
pixels.append( load )
pixels.pop( 0 )
for index, percentage in enumerate( pixels ) :
if percentage > threshold : red, green, blue = intensity * percentage, 0, 0
else : red, green, blue = 0, intensity * percentage, 0
blinkt.set_pixel( index, red, green, blue, percentage )
blinkt.show()
time.sleep( wait )
def show_graph(v, r, g, b):
v *= blinkt.NUM_PIXELS
for x in range(blinkt.NUM_PIXELS):
if v < 0:
r, g, b = 0, 0, 0
else:
r, g, b = [int(min(v, 1.0) * c) for c in [r, g, b]]
blinkt.set_pixel(x, r, g, b)
v -= 1
blinkt.show()
def snake(r, g, b):
"This creates a snake effect on the blinkt using the specified colour"
clear()
for count in range(1, 20):
print(count)
for i in range(8):
clear()
set_pixel(i, r, g, b)
show()
time.sleep(0.05)
clear()
return
def switchColor(col):
#clear()
if col == 0:
for k in range(0,2):
set_pixel(k,0,255,0)
if col == 1:
for k in range(0,2):
set_pixel(k,255,0,0)
if col == 2:
for k in range(0,2):
set_pixel(k,0,0,255)
show()
def __init__(self):
blinkt.clear()
blinkt.show()
self.state = 'OFF'
self.brightness = 1
self.rgb_color = (255, 255, 255)
self.effect = 'None'
self.effect_speed = 50
self.effect_thread = None
self.publish_state()
def splash():
set_brightness(0.3)
for x in range(0, 8):
set_pixel(x, 255, 0, 0)
show()
time.sleep(0.1)
time.sleep(0.1)
for y in range(0, 8):
set_pixel(y, 0, 0, 0)
show()
time.sleep(0.1)
def _running_light(self,stop_me,duration=5,rgb=[0,0,255],delay=0):
""" running light of defined color (modified from blinkt-example larson.py) """
duration = int(duration)
self._settings.log.msg(
"LedController: executing running_light-alarm for %s minutes" % duration)
(r,g,b) = rgb
values = [(0,0,0), (0,0,0), (0,0,0), (0,0,0), (0,0,0),
(r//16,g//16,b//16),
(r//4,g//4,b//4),
(r,g,b),
(r//4,g//4,b//4),
(r//16,g//16,b//16),
(0,0,0), (0,0,0), (0,0,0), (0,0,0), (0,0,0), (0,0,0)]
start_time = time.time()
end_time = start_time + 60*duration
now = start_time
# honor delay
delay = int(delay)
if delay > 0:
self._settings.log.msg(
"LedController: delaying alarm for %d minutes" % delay)
if stop_me.wait(60*delay):
return
if simulate:
stop_me.wait(60*duration)
self._settings.log.msg("LedController: running_light-alarm finished")
else:
with self._lock:
blinkt.set_brightness(1.0)
while now <= end_time:
delta = (now - start_time) * 16
offset = int(abs((delta % 16) - 8))
for i in range(8):
(rv,gv,bv) = values[offset + i]
blinkt.set_pixel(i,rv,gv,bv)
blinkt.show()
if stop_me.wait(0.1):
break
now = time.time()
# reset display to standard
self._settings.log.msg("LedController: running_light-alarm finished")
self._set_leds()
def set_colour(colour):
r = '0x' + colour[0:2]
g = '0x' + colour[2:4]
b = '0x' + colour[4:6]
r_value = int(r, 0)
g_value = int(g, 0)
b_value = int(b, 0)
print('Updating color: r =', r_value, ', g =', g_value, ', b =', b_value)
blinkt.set_all(r_value, g_value, b_value)
blinkt.show()
def blink_blinkt():
for i in range(3):
for j in range(blinkt.NUM_PIXELS):
blinkt.set_pixel(j, 255, 0, 0)
blinkt.show()
time.sleep(0.1)
for j in range(blinkt.NUM_PIXELS):
blinkt.set_pixel(j, 0, 0, 0)
blinkt.show()
time.sleep(0.2)
def flash(duration, intensity):
"""
This flashes the lights for a certain duration then shuts them off.
:param duration: in seconds, duration of the flash
:param intensity: intensity of the flash, bounded [0,1]
"""
clear()
set_brightness(intensity)
set_all(R, G, B)
show()
time.sleep(duration)
clear()
show()
def trace(current_led, r, g, b, direction):
clear()
if direction == "forwards":
#three lights on at once, front light is brighter than back light
single_led(current_led, r, g, b, 1)
single_led(current_led - 1, r, g, b, 0.5)
single_led(current_led - 2, r, g, b, 0.1)
else:
#inverts the direction of the three lights
single_led(current_led, r, g, b, 1)
single_led(current_led + 1, r, g, b, 0.5)
single_led(current_led + 2, r, g, b, 0.1)
show()
def blink_blinkt(rgb_tuple):
try:
set_all(*rgb_tuple)
except Exception as e:
set_all(255, 255, 255)
with open("log.txt", "a") as f:
f.write(e + "\n")
set_brightness(1)
show()
time.sleep(0.2)
clear()
show()
def rainbow(duration, brightness):
spacing = 360.0 / 16.0
set_brightness(brightness)
start = time.time()
while should_it_continue(start, duration):
hue = int(time.time() * 100) % 360
for x in range(8):
offset = x * spacing
h = ((hue + offset) % 360) / 360.0
r, g, b = [int(c * 255) for c in colorsys.hsv_to_rgb(h, 1.0, 1.0)]
set_pixel(x, r, g, b)
show()
time.sleep(0.01)
def fog(r, g, b):
import random
for i in range(150):
pixels = random.sample(range(blinkt.NUM_PIXELS), random.randint(1, 5))
for i in range(blinkt.NUM_PIXELS):
if i in pixels:
blinkt.set_pixel(i, r, g, b) # change colour in the last 3 digits here
else:
blinkt.set_pixel(i, 0, 0, 0)
blinkt.show()
time.sleep(0.05)
blinkt.clear()
blinkt.show()
def dance():
for i in xrange(100):
clear()
l= [[0, 2, 4, 6], [1, 3, 5, 7]]
poslist=l[i%2]
for pos in poslist:
#poslist is a set of positions of pixels
r=0
g=255-pos*32
b=pos*32
set_pixel(pos, r, g, b)
show()
time.sleep(0.1)
def show_n(n):
for i in range(8):
set_pixel(i, 0, 0, 0)
show()
sleep(1)
for i in range(8):
if n > i:
set_pixel(i, 0, 0, 255)
else:
set_pixel(i, 0, 0, 0)
show()
sleep(1)
sleep(1)
def zip_zip(flash_count, color):
all_off()
for index in range(flash_count):
for y in range(4):
lights.set_pixel(y, color[0], color[1], color[2])
lights.set_pixel(7 - y, color[0], color[1], color[2])
lights.show()
time.sleep(.1)
for y in range(4):
lights.set_pixel(y, BLACK[0], BLACK[1], BLACK[2])
lights.set_pixel(7 - y, BLACK[0], BLACK[1], BLACK[2])
lights.show()
time.sleep(.1)
def rainbow(lock, stop):
spacing = 360.0 / 16.0
with lock:
while not stop.is_set():
hue = int(time.time() * 100) % 360
for x in range(blinkt.NUM_PIXELS):
offset = x * spacing
h = ((hue + offset) % 360) / 360.0
r, g, b = [int(c * 255) for c in colorsys.hsv_to_rgb(h, 1.0, 1.0)]
blinkt.set_pixel(x, r, g, b)
blinkt.show()
time.sleep(0.001)
blinkt.clear()
def show_graph(v, r, g, b):
v *= 8
for x in range(8):
hue = ((hue_start + ((x/8.0) * hue_range)) % 360) / 360.0
r, g, b = [int(c * 255) for c in colorsys.hsv_to_rgb(hue,1.0,1.0)]
if v < 0:
brightness = 0
else:
brightness = min(v,1.0) * max_brightness
set_pixel(x, r, g, b, brightness)
v -= 1
show()
def alarm():
for o in range(10):
set_brightness(1)
for i in range(8):
set_pixel(i, 255, 0, 0)
show()
#time.sleep(0.05)
time.sleep(0.2)
for i in range(8):
set_pixel(i, 0, 0, 255)
show()
time.sleep(0.2)
off()
def unknown():
set_brightness(1)
last = 0
for i in range(8):
if i % 3 == 0:
set_pixel(last, 0, 0, 0)
last = i
set_pixel(i, 255, 0, 255)
show()
time.sleep(0.5)
for i in range(8):
set_pixel(i, 0, 0, 0)
show()
def light_up():
for pixel in range(8):
r = randint(0, 255)
g = randint(0, 255)
b = randint(0, 255)
set_pixel(pixel, r, g, b)
show()
sleep(0.1)
sleep(1)
clear()
# must call this to turn lights off
show()
def show_graph(v, r, g, b):
v *= blinkt.NUM_PIXELS
for x in range(blinkt.NUM_PIXELS):
hue = ((hue_start + (
(x / float(blinkt.NUM_PIXELS)) * hue_range)) % 360) / 360.0
r, g, b = color
if v < 0:
brightness = 0
else:
brightness = min(v, 1.0) * max_brightness
blinkt.set_pixel(x, r, g, b, brightness)
v -= 1
blinkt.show()
def pulse():
clear()
set_brightness(0.05)
set_pixel(3, 2, 103, 193)
set_pixel(4, 2, 103, 193)
show()
time.sleep(0.05)
set_pixel(3, 2, 103, 193)
set_pixel(4, 2, 103, 193)
set_pixel(2, 2, 103, 193)
set_pixel(5, 2, 103, 193)
show()
time.sleep(0.05)
set_pixel(3, 2, 103, 193)
set_pixel(4, 2, 103, 193)
set_pixel(2, 2, 103, 193)
set_pixel(5, 2, 103, 193)
set_pixel(1, 2, 103, 193)
set_pixel(6, 2, 103, 193)
show()
time.sleep(0.05)
set_pixel(3, 2, 103, 193)
set_pixel(4, 2, 103, 193)
set_pixel(2, 2, 103, 193)
set_pixel(5, 2, 103, 193)
set_pixel(1, 2, 103, 193)
set_pixel(6, 2, 103, 193)
set_pixel(0, 2, 103, 193)
set_pixel(7, 2, 103, 193)
show()
async def scroll_leds_task(self):
while True:
if (self.scroll_leds):
print("Scrolling leds")
for i in range(8):
clear()
set_pixel(i, self.leds[i].r, self.leds[i].g,
self.leds[i].b)
show()
await asyncio.sleep(0.05)
clear()
show()
else:
await asyncio.sleep(.5)
def main():
while True:
cpu = cpu_percent()
if cpu < 33:
blinkt.set_all(0, 255, 0)
print(str(cpu) + "%--green")
elif cpu < 66:
blinkt.set_all(210, 179, 27)
print(str(cpu) + "%--yellow")
else:
blinkt.set_all(255, 0, 0)
print(str(cpu) + "%--red")
blinkt.show()
sleep(5)
def light_up():
'''random colors light up in a smooth linear fashion then stay lit for one second'''
for pixel in range(8):
r = randint(0, 255)
g = randint(0, 255)
b = randint(0, 255)
set_pixel(pixel, r, g, b)
show()
sleep(0.1)
sleep(1)
clear()
# must call this to turn lights off
show()
def throbbing(self):
brightness = 1
blinkt.set_brightness(bright_math(brightness))
pixels = [*range(0, blinkt.NUM_PIXELS)
][-2:] + [*range(0, blinkt.NUM_PIXELS)][0:6]
for pixel in pixels:
blinkt.set_all(255, 0, 0)
blinkt.set_pixel(pixel, 0, 0, 0)
if pixel == blinkt.NUM_PIXELS - 1:
blinkt.set_pixel(0, 0, 0, 0)
else:
blinkt.set_pixel(pixel + 1, 0, 0, 0)
blinkt.show()
time.sleep(0.5)
def led_line(interval, brightness, led, r, g, b, current_status):
"""Cause the lights to travel in a line
and have brightness close to the normal distribution."""
if led == 0 or led == 7:
clear()
set_pixel(led, r, g, b, (brightness / 20.0))
show()
custom_sleep(interval, current_status)
elif led == 1 or led == 6:
clear()
set_pixel(led, r, g, b, (brightness / 10.0))
show()
custom_sleep(interval, current_status)
elif led == 2 or led == 5:
clear()
set_pixel(led, r, g, b, (brightness / 5.0))
show()
custom_sleep(interval, current_status)
elif led == 3 or led == 4:
clear()
set_pixel(led, r, g, b, brightness)
show()
custom_sleep(interval, current_status)
def on_event(self, event, payload):
self._logger.info("Received event " + event)
if event == "CaptureStart":
clear()
set_all(255, 255, 255, 0.1)
show()
if event == "CaptureDone":
clear()
# Restore the progress
self._set_progress(self._blinkt_progress)
show()
if event == "PrintDone":
clear()
for x in range(120):
for n in range(8):
if x % 2 == 0:
set_pixel(n,0,0,0)
if x % 2 == 1:
set_pixel(n,0,255,0)
show()
time.sleep(0.05)
clear()
show()
def show(self, latency=0):
r, g, b = self.makeColor(latency)
set_pixel(self.bit, r, g, b, config.light)
show()
# try and correct the pause to make ping test have a
# frequency of once per configured pause moment
time.sleep(float(config.pause) - (float(latency) / 1000.0))
set_pixel(self.bit, r, g, b, config.dim)
show()
if config.LR:
self.bit = self.bit + 1 if self.bit < 7 else 0
else:
self.bit = self.bit - 1 if self.bit > 0 else 7
def rainbowit(): spacing = 360.0 / 16.0 hue = 0 blinkt.set_brightness(0.1) for i in range(500): hue = int(time.time() * 100) % 360 for x in range(8): offset = x * spacing h = ((hue + offset) % 360) / 360.0 r, g, b = [int(c * 255) for c in colorsys.hsv_to_rgb(h, 1.0, 1.0)] blinkt.set_pixel(x, r, g, b) blinkt.show() time.sleep(0.001)
def fade_count(n, r, g, b, fast=None, bright=1.0):
if fast is None:
delay=0.125
else:
delay=0.0625
for j in range (n):
for i in range(8):
set_pixel(i, r, g, b, bright)
show()
sleep(delay)
for i in range(8):
set_pixel(i, 0, 0, 0, bright)
show()
sleep(delay)
def kit_chase(colour, iterations=100, fade=6, delay=0.1, background=(0,0,0)):
current_pixel = 0
decrement = 100.0** (1 / float(fade))
level = [0.0 for x in range(8)]
step = -1
for _ in range(iterations):
if current_pixel % 7 == 0:
step = 0 - step
level = [max(x / decrement, 0) for x in level]
level[current_pixel] = 1.0
for pixel in range(8):
set_pixel(pixel, *colour, brightness=level[pixel])
show()
print("{0:d} : {1:1.2f} {2:1.2f} {3:1.2f} {4:1.2f} {5:1.2f} {6:1.2f} {7:1.2f} {8:1.2f}".format(current_pixel, *level))
current_pixel += step
sleep(delay)
def setleds(self, state): # blinkt.set_all(state,state,state) # params are r,g,b blinkt.set_pixel(0,state,state,state) # params are r,g,b if state > 10: blinkt.set_pixel(1,state,state,state) # params are r,g,b else: blinkt.set_pixel(1,0,0,0) if state > 20: blinkt.set_pixel(2,state,state,state) # params are r,g,b else: blinkt.set_pixel(2,0,0,0) if state > 30: blinkt.set_pixel(3,state,state,state) # params are r,g,b else: blinkt.set_pixel(3,0,0,0) blinkt.show() return(0)
def on_ble_write(self, *args, **kwargs):
try:
# bytes=[0x07, 0x02, 0x00, 0x01, 0x00, 0x0FF, 0x00]
bytes = args[1]["Value"]
if len(bytes) > 2:
cmd = (bytes[0] << 8) + (bytes[1] & 0xff)
if cmd == 0x0702:
if len(bytes) >= 7:
set_pixel(bytes[3] - 1, bytes[4], bytes[5], bytes[6])
elif cmd == 0x0601:
if len(bytes) >= 5:
set_all(bytes[2], bytes[3], bytes[4])
show()
except Exception as inst:
print(type(inst))
print(inst.args)
print(inst)
return 0
def main(brightness, update_interval, blink_rate=0.1):
tfl_status_obj = tubestatus.Status()
should_blink = True
while True:
update_line_statuses(tfl_status_obj)
# update LEDS
for x in range(0, int(update_interval/blink_rate), 1):
set_brightness(brightness)
for line, line_desc in CONFIG.iteritems():
if line_desc["open"]:
if line_desc["status"] != GOOD_SERVICE:
set_led_status(line_desc, should_blink)
else:
set_led_status(line_desc, True)
show()
sleep(blink_rate)
should_blink = not should_blink
def on_message(client, userdata, msg):
data = msg.payload.split(',')
command = data.pop(0)
if command == "clr" and len(data) == 0:
clear()
show()
return
if command == "rgb" and len(data) == 4:
try:
pixel = data.pop(0)
if pixel == "*":
pixel = None
else:
pixel = int(pixel)
if pixel > 7:
print("Pixel out of range: " + str(pixel))
return
r, g, b = [int(x) & 0xff for x in data]
print(command, pixel, r, g, b)
except ValueError:
print("Malformed command: " + str(msg.payload))
return
if pixel is None:
for x in range(8):
set_pixel(x, r, g, b)
else:
set_pixel(pixel, r, g, b)
show()
return
def random_pulse(r,g,b):
px = random.randint(0,7)
for pct in range(0, 100, 10):
set_pixel(px, lum(r,pct), lum(g,pct), lum(b,pct))
show()
time.sleep(0.02)
set_pixel(px, lum(r,90), lum(g,90), lum(b,90))
show()
time.sleep(0.02)
set_pixel(px, lum(r,80), lum(g,80), lum(b,80))
show()
time.sleep(0.02)
def BlinktManager():
#time.sleep(20)
localBrightness=globalBrightness
while not globalShutdown:
spacing = 360.0 / 16.0
hue = 0
if localBrightness!=globalBrightness:
blinkt.set_brightness(globalBrightness)
localBrightness=globalBrightness
if globalResponse=='pulse':
for z in list(range(1, 10)[::-1]) + list(range(1, 10)):
fwhm = 5.0/z
gauss = make_gaussian(fwhm)
start = time.time()
y = 4
for x in range(blinkt.NUM_PIXELS):
h = 0.5
s = 1.0
v = gauss[x, y]
rgb = colorsys.hsv_to_rgb(h, s, v)
r, g, b = [int(255.0 * i) for i in rgb]
blinkt.set_pixel(x, r, g, b)
blinkt.show()
end = time.time()
t = end - start
if t < 0.04:
time.sleep(0.04 - t)
time.sleep(0.15)
elif globalResponse=='rainbow':
hue = int(time.time() * 100) % 360
for x in range(blinkt.NUM_PIXELS):
offset = x * spacing
h = ((hue + offset) % 360) / 360.0
r, g, b = [int(c*255) for c in colorsys.hsv_to_rgb(h, 1.0, 1.0)]
blinkt.set_pixel(x,r,g,b)
blinkt.show()
time.sleep(0.15)
elif globalResponse=='solid':
blinkt.set_all(255, 255, 255)
print "solid"
time.sleep(3)
elif globalResponse=='off':
blinkt.set_all(0, 0, 0)
time.sleep(3)
blinkt.show()
def ledstage( stage ):
#Prevent the LED's clearing after script execution and reboot.
set_clear_on_exit(False)
#Colours!
colours = []
colours.append([255,25,0])
colours.append([200,50,0])
colours.append([150,75,0])
colours.append([125,100,0])
colours.append([100,125,0])
colours.append([50,175,0])
colours.append([25,200,0])
colours.append([0,255,0])
#Loop var
x = 0
#Clear LED's if 0
if stage == 0:
set_all(0,0,0)
show()
elif stage == 8:
#Party!
counter = 50
while x < counter:
for i in range(8):
set_pixel(i, random.randint(0,255), random.randint(0,255), random.randint(0,255))
show()
time.sleep(0.05)
x += 1
else:
while x < stage:
set_pixel(x,colours[x][0],colours[x][1],colours[x][2],0.1)
show()
x += 1
import sys
import time
from blinkt import set_all, set_clear_on_exit, show
def usage():
print("Usage: {} <r> <g> <b>".format(sys.argv[0]))
sys.exit(1)
if len(sys.argv) != 4:
usage()
# Exit if non integer value. int() will raise a ValueError
try:
r, g, b = [int(x) for x in sys.argv[1:]]
except ValueError:
usage()
# Exit if any of r, g, b are greater than 255
if max(r,g,b) > 255:
usage()
print("Setting Blinkt to {r},{g},{b}".format(r=r,g=g,b=b))
set_clear_on_exit(False)
set_all(r, g, b)
show()
def process_event(event, device_id):
"""Pretty prints events.
Prints all events that occur with two spaces between each new
conversation and a single space between turns of a conversation.
Args:
event(event.Event): The current event to process.
"""
if event.type == EventType.ON_CONVERSATION_TURN_STARTED:
subprocess.Popen(["aplay", "/home/pi/GassistPi/sample-audio-files/Fb.wav"], stdin=subprocess.PIPE, stdout=subprocess.PIPE, stderr=subprocess.PIPE)
#Uncomment the following after starting the Kodi
#status=mutevolstatus()
#vollevel=status[1]
#with open('/home/pi/.volume.json', 'w') as f:
#json.dump(vollevel, f)
#kodi.Application.SetVolume({"volume": 0})
GPIO.output(5,GPIO.HIGH)
led.ChangeDutyCycle(100)
print()
print(event)
if (event.type == EventType.ON_RESPONDING_STARTED and event.args and not event.args['is_error_response']):
GPIO.output(5,GPIO.LOW)
GPIO.output(6,GPIO.HIGH)
led.ChangeDutyCycle(50)
if event.type == EventType.ON_RESPONDING_FINISHED:
GPIO.output(6,GPIO.LOW)
GPIO.output(5,GPIO.HIGH)
led.ChangeDutyCycle(100)
print(event)
if (event.type == EventType.ON_CONVERSATION_TURN_FINISHED and
event.args and not event.args['with_follow_on_turn']):
GPIO.output(5,GPIO.LOW)
led.ChangeDutyCycle(0)
#Uncomment the following after starting the Kodi
#with open('/home/pi/.volume.json', 'r') as f:
#vollevel = json.load(f)
#kodi.Application.SetVolume({"volume": vollevel})
print()
if event.type == EventType.ON_DEVICE_ACTION:
for command, params in process_device_actions(event, device_id):
print('Do command', command, 'with params', str(params))
if command=='action.devices.commands.OnOff':
if params['on']:
blinkt.set_all(255, 255, 255,brightness=0.05)
blinkt.show()
else:
blinkt.clear()
blinkt.show()
if command=='action.devices.commands.ColorAbsolute':
r,g,b=colourconv(params['color']['spectrumRGB'])
print(r,g,b)
blinkt.set_all(r,g,b)
blinkt.show()
if command=='action.devices.commands.BrightnessAbsolute':
bright=(params['brightness'])/100
blinkt.set_brightness(bright)
blinkt.show()
def blinkt_all(r,g,b):
for i in range (8):
set_pixel(i, r, g, b)
show()
def display_blank():
clear()
show()
def clear(*args):
for line, line_desc in CONFIG.iteritems():
turn_led_off_for(line)
show()
sys.exit(0)