def test_recv_message_separator_time(self):
"""
Verify that message_separator_time works correctly.
Receive a message over time t, where t > message_separator_time, and each part of the message is delayed by
t' < message_separator_time.
Given: A SerialConnection using MockSerial,
and: timeout set to 60ms.
and: message_separator_time set 20ms
When: User calls SerialConnection.recv(max_bytes=60).
and: MockSerial.recv set to return increasing bytes.
and: MockSerial.recv set to delay very briefly on each call (0.001ms (1 microsecond)).
Then: SerialConnection.recv calls MockSerial.recv multiple times (more than 2).
and: SerialConnection.recv returns data with multiple bytes (more than 2).
"""
# Given
self.uut = SerialConnection(timeout=.060, message_separator_time=.020)
self.uut._connection = self.mock
# When
self.mock.recv_return_queue = [b'1'] * 60
self.mock.recv_wait_times = [0.000001] * 60
data = self.uut.recv(max_bytes=60)
# Then
self.assertGreater(len(self.mock.recv_max_bytes_lengths), 2)
self.assertGreater(len(data), 2)
def test_recv_message_separator_time_2(self):
"""
Verify that message_separator_time works correctly.
Receive a message that times out with message_separator_time, but which would not time out with only a timeout.
Given: A SerialConnection using MockSerial,
and: timeout set to 60ms.
and: message_separator_time set 20ms
When: User calls SerialConnection.recv(60).
and: MockSerial.recv set to return 1 byte, then 1 byte, then 58 bytes.
and: MockSerial.recv set to delay 1ms, then 40ms, then 1ms.
Then: SerialConnection.recv calls MockSerial.recv twice.
and: SerialConnection.recv returns only the first two bytes.
"""
# Given
self.uut = SerialConnection(timeout=.060, message_separator_time=.020)
self.uut._connection = self.mock
# When
self.mock.recv_return_queue = [b'1', b'2', b'3' * 58]
self.mock.recv_wait_times = [.001, .040, .001]
data = self.uut.recv(max_bytes=60)
# Then
self.assertEqual(len(self.mock.recv_max_bytes_lengths), 2)
self.assertEqual(data, b'12')
def test_recv_message_content_checker(self):
"""
Verify that content_checker is used correctly.
The content_checker indicates how much of a message is valid, if any.
Verify behavior when the content_checker consumes a part of the buffer, the full buffer, and then part of it
again.
Given: A SerialConnection using MockSerial,
and: timeout set to 100ms.
and: message_separator_time set 20ms
and: content_checker set to a function that returns 0, 3, 0, 5, 0, 3
When: User calls SerialConnection.recv(100) 3 times.
and: MockSerial.recv set to return 2 bytes repeatedly.
Then: SerialConnection.recv calls MockSerial.recv 6 times.
and: SerialConnection.recv returns only the first 3 bytes, then the next 5 bytes, then the next 3.
"""
# Given
# PyUnusedLocal suppression: args/kwargs make the method callable by SerialConnection, but are not used.
# noinspection PyUnusedLocal
def test_checker(*args, **kwargs):
"""
:param args: Ignored. Makes method callable with arguments.
:param kwargs: Ignored. Makes method callable with arguments.
:return: 0, 3, 0, 5, 0, 3, 0, 0...
"""
if not hasattr(test_checker, "counter"):
test_checker.counter = 0
test_checker.counter += 1
if test_checker.counter == 2:
return 3
elif test_checker.counter == 4:
return 5
elif test_checker.counter == 6:
return 3
else:
return 0
self.uut = SerialConnection(timeout=0.100, message_separator_time=0.020, content_checker=test_checker)
self.uut._connection = self.mock
# When
self.mock.recv_return_queue = [b"12", b"34", b"56", b"78", b"9A", b"BC"]
data = self.uut.recv(max_bytes=100)
self.assertEqual(len(self.mock.recv_max_bytes_lengths), 2)
self.assertEqual(data, b"123")
data = self.uut.recv(max_bytes=100)
self.assertEqual(len(self.mock.recv_max_bytes_lengths), 4)
self.assertEqual(data, b"45678")
data = self.uut.recv(max_bytes=100)
self.assertEqual(len(self.mock.recv_max_bytes_lengths), 6)
self.assertEqual(data, b"9AB")
def test_recv_message_separator_time_2(self):
"""
Verify that message_separator_time works correctly.
Receive a message that times out with message_separator_time, but which would not time out with only a timeout.
Given: A SerialConnection using MockSerial,
and: timeout set to 60ms.
and: message_separator_time set 20ms
When: User calls SerialConnection.recv(60).
and: MockSerial.recv set to return 1 byte, then 1 byte, then 58 bytes.
and: MockSerial.recv set to delay 1ms, then 40ms, then 1ms.
Then: SerialConnection.recv calls MockSerial.recv twice.
and: SerialConnection.recv returns only the first two bytes.
"""
# Given
self.uut = SerialConnection(timeout=0.060, message_separator_time=0.020)
self.uut._connection = self.mock
# When
self.mock.recv_return_queue = [b"1", b"2", b"3" * 58]
self.mock.recv_wait_times = [0.001, 0.040, 0.001]
data = self.uut.recv(max_bytes=60)
# Then
self.assertEqual(len(self.mock.recv_max_bytes_lengths), 2)
self.assertEqual(data, b"12")
def test_recv_message_separator_time(self):
"""
Verify that message_separator_time works correctly.
Receive a message over time t, where t > message_separator_time, and each part of the message is delayed by
t' < message_separator_time.
Given: A SerialConnection using MockSerial,
and: timeout set to 60ms.
and: message_separator_time set 20ms
When: User calls SerialConnection.recv(max_bytes=60).
and: MockSerial.recv set to return increasing bytes.
and: MockSerial.recv set to delay very briefly on each call (0.001ms (1 microsecond)).
Then: SerialConnection.recv calls MockSerial.recv multiple times (more than 2).
and: SerialConnection.recv returns data with multiple bytes (more than 2).
"""
# Given
self.uut = SerialConnection(timeout=0.060, message_separator_time=0.020)
self.uut._connection = self.mock
# When
self.mock.recv_return_queue = [b"1"] * 60
self.mock.recv_wait_times = [0.000001] * 60
data = self.uut.recv(max_bytes=60)
# Then
self.assertGreater(len(self.mock.recv_max_bytes_lengths), 2)
self.assertGreater(len(data), 2)
def test_recv_timeout(self):
"""
Verify that recv() returns partial messages after the timeout expires.
Given: A SerialConnection using MockSerial,
with timeout set to a smallish value.
When: User calls SerialConnection.recv(n) several times with different values of n.
and: MockSerial.recv set to return a single message, then repeatedly return nothing.
Then: SerialConnection.recv calls MockSerial.recv at least once.
and: SerialConnection.recv returns the MockSerial.recv() return value after the timeout.
Note: Timeout functionality is tested, but not the precise timing.
"""
self.uut = SerialConnection(timeout=.001) # 1ms
self.uut._connection = self.mock
# n == 1
self.mock.recv_return_nothing_by_default = True
self.mock.recv_return_queue = [b'']
data = self.uut.recv(max_bytes=1)
self.assertGreaterEqual(len(self.mock.recv_max_bytes_lengths), 1)
self.assertEqual(data, b'')
# n == 2
self.mock.recv_return_nothing_by_default = True
self.mock.recv_return_queue = [b'1']
data = self.uut.recv(max_bytes=2)
self.assertGreaterEqual(len(self.mock.recv_max_bytes_lengths), 1)
self.assertEqual(data, b'1')
# n == 3, len(data) == 1
self.mock.recv_return_nothing_by_default = True
self.mock.recv_return_queue = [b'1']
data = self.uut.recv(max_bytes=5)
self.assertGreaterEqual(len(self.mock.recv_max_bytes_lengths), 1)
self.assertEqual(data, b'1')
# n == 3, len(data) == 2
self.mock.recv_return_nothing_by_default = True
self.mock.recv_return_queue = [b'12']
data = self.uut.recv(max_bytes=3)
self.assertGreaterEqual(len(self.mock.recv_max_bytes_lengths), 1)
self.assertEqual(data, b'12')
def test_recv_timeout(self):
"""
Verify that recv() returns partial messages after the timeout expires.
Given: A SerialConnection using MockSerial,
with timeout set to a smallish value.
When: User calls SerialConnection.recv(n) several times with different values of n.
and: MockSerial.recv set to return a single message, then repeatedly return nothing.
Then: SerialConnection.recv calls MockSerial.recv at least once.
and: SerialConnection.recv returns the MockSerial.recv() return value after the timeout.
Note: Timeout functionality is tested, but not the precise timing.
"""
self.uut = SerialConnection(timeout=0.001) # 1ms
self.uut._connection = self.mock
# n == 1
self.mock.recv_return_nothing_by_default = True
self.mock.recv_return_queue = [b""]
data = self.uut.recv(max_bytes=1)
self.assertGreaterEqual(len(self.mock.recv_max_bytes_lengths), 1)
self.assertEqual(data, b"")
# n == 2
self.mock.recv_return_nothing_by_default = True
self.mock.recv_return_queue = [b"1"]
data = self.uut.recv(max_bytes=2)
self.assertGreaterEqual(len(self.mock.recv_max_bytes_lengths), 1)
self.assertEqual(data, b"1")
# n == 3, len(data) == 1
self.mock.recv_return_nothing_by_default = True
self.mock.recv_return_queue = [b"1"]
data = self.uut.recv(max_bytes=5)
self.assertGreaterEqual(len(self.mock.recv_max_bytes_lengths), 1)
self.assertEqual(data, b"1")
# n == 3, len(data) == 2
self.mock.recv_return_nothing_by_default = True
self.mock.recv_return_queue = [b"12"]
data = self.uut.recv(max_bytes=3)
self.assertGreaterEqual(len(self.mock.recv_max_bytes_lengths), 1)
self.assertEqual(data, b"12")
def setUp(self):
self.mock = MockSerial()
self.uut = SerialConnection()
self.uut._connection = self.mock
class TestSerialConnection(unittest.TestCase):
def setUp(self):
self.mock = MockSerial()
self.uut = SerialConnection()
self.uut._connection = self.mock
def test_open(self):
"""
Given: A SerialConnection using MockSerial.
When: Calling SerialConnection.open().
Then: MockSerial.open() is called.
"""
self.uut.open()
self.assertTrue(self.mock.open_called)
def test_close(self):
"""
Given: A SerialConnection using MockSerial.
When: Calling SerialConnection.close().
Then: MockSerial.close() is called.
"""
self.uut.close()
self.assertTrue(self.mock.close_called)
###########################################################################
# Send tests
###########################################################################
def test_send_basic(self):
"""
Given: A SerialConnection using MockSerial.
When: Calling SerialConnection.send(data)
and: MockSerial.send() returns len(data).
Then: Verify MockSerial.send() was called only once.
and: Verify MockSerial.send() received the expected data.
"""
# When
data = b'ABCDEFG'
self.uut.send(data=data)
# Then
self.assertEqual(len(self.mock.send_data_list), 1)
self.assertEqual(self.mock.send_data_list[0], b'ABCDEFG')
def test_send_return_none(self):
"""
Verify that MockSerial.send() is called again when it returns None.
Given: A SerialConnection using MockSerial.
When: Calling SerialConnection.send(data) with 10 bytes.
and: MockSerial.send() returns: None, 10.
Then: Verify MockSerial.send() was called exactly 2 times.
and: Verify MockSerial.send() received the expected data each time.
"""
# When
data = b'123456789A'
self.mock.send_return_queue = [None, 10]
self.uut.send(data=data)
# Then
self.assertEqual(len(self.mock.send_data_list), 2)
self.assertEqual(self.mock.send_data_list,
[b'123456789A', b'123456789A'])
def test_send_multiple(self):
"""
Verify that MockSerial.send() is called repeatedly until it sends all the data.
Given: A SerialConnection using MockSerial.
When: Calling SerialConnection.send(data) with 9 bytes.
and: MockSerial.send() returns: 0, None, 0, 1, 2, 3, 2, 1.
Then: Verify MockSerial.send() was called exactly 7 times.
and: Verify MockSerial.send() received the expected data each time.
"""
# When
data = b'123456789'
self.mock.send_return_queue = [0, None, 0, 1, 2, 3, 2, 1]
self.uut.send(data=data)
# Then
self.assertEqual(len(self.mock.send_data_list), 8)
self.assertEqual(self.mock.send_data_list, [
b'123456789', b'123456789', b'123456789', b'123456789',
b'23456789', b'456789', b'789', b'9'
])
def test_send_off_by_one(self):
"""
Verify that MockSerial.send() is called again when it sends all but 1 byte.
Given: A SerialConnection using MockSerial.
When: Calling SerialConnection.send(data) with 9 bytes.
and: MockSerial.send() returns: 8, 1.
Then: Verify MockSerial.send() was called exactly 2 times.
and: Verify MockSerial.send() received the expected data each time.
"""
# When
data = b'123456789'
self.mock.send_return_queue = [8, 1]
self.uut.send(data=data)
# Then
self.assertEqual(len(self.mock.send_data_list), 2)
self.assertEqual(self.mock.send_data_list, [b'123456789', b'9'])
def test_send_one_byte(self):
"""
Verify that MockSerial.send() is called again when it returns 0 after being given 1 byte.
Given: A SerialConnection using MockSerial.
When: Calling SerialConnection.send(data) with 1 byte.
and: MockSerial.send() returns: 0, 1.
Then: Verify MockSerial.send() was called exactly 2 times.
and: Verify MockSerial.send() received the expected data each time.
"""
# When
data = b'1'
self.mock.send_return_queue = [0, 1]
self.uut.send(data=data)
# Then
self.assertEqual(len(self.mock.send_data_list), 2)
self.assertEqual(self.mock.send_data_list, [b'1', b'1'])
def test_send_many(self):
"""
Verify that send works properly when MockSerial.send() sends 1 byte at a time.
Given: A SerialConnection using MockSerial.
When: Calling SerialConnection.send(data) with 9 bytes.
and: MockSerial.send() returns: 0, 500 times, followed by len(data).
Then: Verify MockSerial.send() was called exactly 501 times.
and: Verify MockSerial.send() received the expected data each time.
"""
# When
data = b'123456789'
self.mock.send_return_queue = [0] * 500 + [len(data)]
self.uut.send(data=data)
# Then
self.assertEqual(len(self.mock.send_data_list), 501)
self.assertEqual(self.mock.send_data_list, [b'123456789'] * 501)
def test_send_zero_bytes(self):
"""
Verify that send() doesn't fail when given 0 bytes.
Given: A SerialConnection using MockSerial.
When: Calling SerialConnection.send(data) with 0 bytes.
and: MockSerial.send() set to return len(data).
Then: Verify MockSerial.send() was called either 0 or 1 times.
and: Verify MockSerial.send() received 0 bytes, if anything.
"""
# When
data = b''
self.mock.send_return_queue = [0, 1]
self.uut.send(data=data)
# Then
self.assertLessEqual(len(self.mock.send_data_list), 1)
if len(self.mock.send_data_list) == 0:
self.assertEqual(self.mock.send_data_list, [])
else:
self.assertEqual(self.mock.send_data_list, [b''])
###########################################################################
# Receive tests
###########################################################################
def test_recv_simple(self):
"""
Verify that recv() works in the normal case.
Given: A SerialConnection using MockSerial,
with no timeout/message_separator_time/content_checker.
When: User calls SerialConnection.recv.
and: MockSerial.recv set to return data of length max_bytes.
Then: SerialConnection calls MockSerial.recv exactly once.
and: SerialConnection.recv returns exactly what MockSerial.recv returned.
"""
# When
self.mock.recv_return_queue = [b'0123456']
data = self.uut.recv(max_bytes=7)
# Then
self.assertEqual(self.mock.recv_max_bytes_lengths, [7])
self.assertEqual(data, b'0123456')
def test_recv_max_bytes_only(self):
"""
Verify that recv() calls MockSerial.recv() repeatedly until it gets max_bytes of data.
Given: A SerialConnection using MockSerial,
with no timeout/message_separator_time/content_checker.
When: User calls SerialConnection.recv(10).
and: MockSerial.recv set to return 0, 0, 0, 1, 2, 3, 4 bytes.
Then: SerialConnection calls MockSerial.recv exactly 7 times,
with max_bytes decreasing as appropriate.
and: SerialConnection.recv returns the concatenation of MockSerial.recv() return values.
"""
# When
self.mock.recv_return_queue = [
b'', b'', b'', b'1', b'22', b'123', b'1234'
]
data = self.uut.recv(max_bytes=10)
# Then
self.assertEqual(self.mock.recv_max_bytes_lengths,
[10, 10, 10, 10, 9, 7, 4])
self.assertEqual(data, b'1221231234')
def test_recv_timeout(self):
"""
Verify that recv() returns partial messages after the timeout expires.
Given: A SerialConnection using MockSerial,
with timeout set to a smallish value.
When: User calls SerialConnection.recv(n) several times with different values of n.
and: MockSerial.recv set to return a single message, then repeatedly return nothing.
Then: SerialConnection.recv calls MockSerial.recv at least once.
and: SerialConnection.recv returns the MockSerial.recv() return value after the timeout.
Note: Timeout functionality is tested, but not the precise timing.
"""
self.uut = SerialConnection(timeout=.001) # 1ms
self.uut._connection = self.mock
# n == 1
self.mock.recv_return_nothing_by_default = True
self.mock.recv_return_queue = [b'']
data = self.uut.recv(max_bytes=1)
self.assertGreaterEqual(len(self.mock.recv_max_bytes_lengths), 1)
self.assertEqual(data, b'')
# n == 2
self.mock.recv_return_nothing_by_default = True
self.mock.recv_return_queue = [b'1']
data = self.uut.recv(max_bytes=2)
self.assertGreaterEqual(len(self.mock.recv_max_bytes_lengths), 1)
self.assertEqual(data, b'1')
# n == 3, len(data) == 1
self.mock.recv_return_nothing_by_default = True
self.mock.recv_return_queue = [b'1']
data = self.uut.recv(max_bytes=5)
self.assertGreaterEqual(len(self.mock.recv_max_bytes_lengths), 1)
self.assertEqual(data, b'1')
# n == 3, len(data) == 2
self.mock.recv_return_nothing_by_default = True
self.mock.recv_return_queue = [b'12']
data = self.uut.recv(max_bytes=3)
self.assertGreaterEqual(len(self.mock.recv_max_bytes_lengths), 1)
self.assertEqual(data, b'12')
# # n == 2**16, len(data) == 2**16 - 1
# self.mock.recv_return_nothing_by_default = True
# self.mock.recv_return_queue = [b'\0'] * (2**16 - 1)
# data = uut.recv(max_bytes=2**16)
# self.assertGreaterEqual(len(self.mock.recv_max_bytes_lengths), 1)
# self.assertEqual(data, [b'\0'] * (2**16 - 1))
def test_recv_message_separator_time(self):
"""
Verify that message_separator_time works correctly.
Receive a message over time t, where t > message_separator_time, and each part of the message is delayed by
t' < message_separator_time.
Given: A SerialConnection using MockSerial,
and: timeout set to 60ms.
and: message_separator_time set 20ms
When: User calls SerialConnection.recv(max_bytes=60).
and: MockSerial.recv set to return increasing bytes.
and: MockSerial.recv set to delay very briefly on each call (0.001ms (1 microsecond)).
Then: SerialConnection.recv calls MockSerial.recv multiple times (more than 2).
and: SerialConnection.recv returns data with multiple bytes (more than 2).
"""
# Given
self.uut = SerialConnection(timeout=.060, message_separator_time=.020)
self.uut._connection = self.mock
# When
self.mock.recv_return_queue = [b'1'] * 60
self.mock.recv_wait_times = [0.000001] * 60
data = self.uut.recv(max_bytes=60)
# Then
self.assertGreater(len(self.mock.recv_max_bytes_lengths), 2)
self.assertGreater(len(data), 2)
def test_recv_message_separator_time_2(self):
"""
Verify that message_separator_time works correctly.
Receive a message that times out with message_separator_time, but which would not time out with only a timeout.
Given: A SerialConnection using MockSerial,
and: timeout set to 60ms.
and: message_separator_time set 20ms
When: User calls SerialConnection.recv(60).
and: MockSerial.recv set to return 1 byte, then 1 byte, then 58 bytes.
and: MockSerial.recv set to delay 1ms, then 40ms, then 1ms.
Then: SerialConnection.recv calls MockSerial.recv twice.
and: SerialConnection.recv returns only the first two bytes.
"""
# Given
self.uut = SerialConnection(timeout=.060, message_separator_time=.020)
self.uut._connection = self.mock
# When
self.mock.recv_return_queue = [b'1', b'2', b'3' * 58]
self.mock.recv_wait_times = [.001, .040, .001]
data = self.uut.recv(max_bytes=60)
# Then
self.assertEqual(len(self.mock.recv_max_bytes_lengths), 2)
self.assertEqual(data, b'12')
def test_recv_message_content_checker(self):
"""
Verify that content_checker is used correctly.
The content_checker indicates how much of a message is valid, if any.
Verify behavior when the content_checker consumes a part of the buffer, the full buffer, and then part of it
again.
Given: A SerialConnection using MockSerial,
and: timeout set to 100ms.
and: message_separator_time set 20ms
and: content_checker set to a function that returns 0, 3, 0, 5, 0, 3
When: User calls SerialConnection.recv(100) 3 times.
and: MockSerial.recv set to return 2 bytes repeatedly.
Then: SerialConnection.recv calls MockSerial.recv 6 times.
and: SerialConnection.recv returns only the first 3 bytes, then the next 5 bytes, then the next 3.
"""
# Given
# PyUnusedLocal suppression: args/kwargs make the method callable by SerialConnection, but are not used.
# noinspection PyUnusedLocal
def test_checker(*args, **kwargs):
"""
:param args: Ignored. Makes method callable with arguments.
:param kwargs: Ignored. Makes method callable with arguments.
:return: 0, 3, 0, 5, 0, 3, 0, 0...
"""
if not hasattr(test_checker, "counter"):
test_checker.counter = 0
test_checker.counter += 1
if test_checker.counter == 2:
return 3
elif test_checker.counter == 4:
return 5
elif test_checker.counter == 6:
return 3
else:
return 0
self.uut = SerialConnection(timeout=.100,
message_separator_time=.020,
content_checker=test_checker)
self.uut._connection = self.mock
# When
self.mock.recv_return_queue = [
b'12', b'34', b'56', b'78', b'9A', b'BC'
]
data = self.uut.recv(max_bytes=100)
self.assertEqual(len(self.mock.recv_max_bytes_lengths), 2)
self.assertEqual(data, b'123')
data = self.uut.recv(max_bytes=100)
self.assertEqual(len(self.mock.recv_max_bytes_lengths), 4)
self.assertEqual(data, b'45678')
data = self.uut.recv(max_bytes=100)
self.assertEqual(len(self.mock.recv_max_bytes_lengths), 6)
self.assertEqual(data, b'9AB')
def test_recv_message_content_checker(self):
"""
Verify that content_checker is used correctly.
The content_checker indicates how much of a message is valid, if any.
Verify behavior when the content_checker consumes a part of the buffer, the full buffer, and then part of it
again.
Given: A SerialConnection using MockSerial,
and: timeout set to 100ms.
and: message_separator_time set 20ms
and: content_checker set to a function that returns 0, 3, 0, 5, 0, 3
When: User calls SerialConnection.recv(100) 3 times.
and: MockSerial.recv set to return 2 bytes repeatedly.
Then: SerialConnection.recv calls MockSerial.recv 6 times.
and: SerialConnection.recv returns only the first 3 bytes, then the next 5 bytes, then the next 3.
"""
# Given
# PyUnusedLocal suppression: args/kwargs make the method callable by SerialConnection, but are not used.
# noinspection PyUnusedLocal
def test_checker(*args, **kwargs):
"""
:param args: Ignored. Makes method callable with arguments.
:param kwargs: Ignored. Makes method callable with arguments.
:return: 0, 3, 0, 5, 0, 3, 0, 0...
"""
if not hasattr(test_checker, "counter"):
test_checker.counter = 0
test_checker.counter += 1
if test_checker.counter == 2:
return 3
elif test_checker.counter == 4:
return 5
elif test_checker.counter == 6:
return 3
else:
return 0
self.uut = SerialConnection(timeout=.100,
message_separator_time=.020,
content_checker=test_checker)
self.uut._connection = self.mock
# When
self.mock.recv_return_queue = [
b'12', b'34', b'56', b'78', b'9A', b'BC'
]
data = self.uut.recv(max_bytes=100)
self.assertEqual(len(self.mock.recv_max_bytes_lengths), 2)
self.assertEqual(data, b'123')
data = self.uut.recv(max_bytes=100)
self.assertEqual(len(self.mock.recv_max_bytes_lengths), 4)
self.assertEqual(data, b'45678')
data = self.uut.recv(max_bytes=100)
self.assertEqual(len(self.mock.recv_max_bytes_lengths), 6)
self.assertEqual(data, b'9AB')
def setUp(self):
self.mock = MockSerial()
self.uut = SerialConnection()
self.uut._connection = self.mock
class TestSerialConnection(unittest.TestCase):
def setUp(self):
self.mock = MockSerial()
self.uut = SerialConnection()
self.uut._connection = self.mock
def test_open(self):
"""
Given: A SerialConnection using MockSerial.
When: Calling SerialConnection.open().
Then: MockSerial.open() is called.
"""
self.uut.open()
self.assertTrue(self.mock.open_called)
def test_close(self):
"""
Given: A SerialConnection using MockSerial.
When: Calling SerialConnection.close().
Then: MockSerial.close() is called.
"""
self.uut.close()
self.assertTrue(self.mock.close_called)
###########################################################################
# Send tests
###########################################################################
def test_send_basic(self):
"""
Given: A SerialConnection using MockSerial.
When: Calling SerialConnection.send(data)
and: MockSerial.send() returns len(data).
Then: Verify MockSerial.send() was called only once.
and: Verify MockSerial.send() received the expected data.
"""
# When
data = b"ABCDEFG"
self.uut.send(data=data)
# Then
self.assertEqual(len(self.mock.send_data_list), 1)
self.assertEqual(self.mock.send_data_list[0], b"ABCDEFG")
def test_send_return_none(self):
"""
Verify that MockSerial.send() is called again when it returns None.
Given: A SerialConnection using MockSerial.
When: Calling SerialConnection.send(data) with 10 bytes.
and: MockSerial.send() returns: None, 10.
Then: Verify MockSerial.send() was called exactly 2 times.
and: Verify MockSerial.send() received the expected data each time.
"""
# When
data = b"123456789A"
self.mock.send_return_queue = [None, 10]
self.uut.send(data=data)
# Then
self.assertEqual(len(self.mock.send_data_list), 2)
self.assertEqual(self.mock.send_data_list, [b"123456789A", b"123456789A"])
def test_send_multiple(self):
"""
Verify that MockSerial.send() is called repeatedly until it sends all the data.
Given: A SerialConnection using MockSerial.
When: Calling SerialConnection.send(data) with 9 bytes.
and: MockSerial.send() returns: 0, None, 0, 1, 2, 3, 2, 1.
Then: Verify MockSerial.send() was called exactly 7 times.
and: Verify MockSerial.send() received the expected data each time.
"""
# When
data = b"123456789"
self.mock.send_return_queue = [0, None, 0, 1, 2, 3, 2, 1]
self.uut.send(data=data)
# Then
self.assertEqual(len(self.mock.send_data_list), 8)
self.assertEqual(
self.mock.send_data_list,
[b"123456789", b"123456789", b"123456789", b"123456789", b"23456789", b"456789", b"789", b"9"],
)
def test_send_off_by_one(self):
"""
Verify that MockSerial.send() is called again when it sends all but 1 byte.
Given: A SerialConnection using MockSerial.
When: Calling SerialConnection.send(data) with 9 bytes.
and: MockSerial.send() returns: 8, 1.
Then: Verify MockSerial.send() was called exactly 2 times.
and: Verify MockSerial.send() received the expected data each time.
"""
# When
data = b"123456789"
self.mock.send_return_queue = [8, 1]
self.uut.send(data=data)
# Then
self.assertEqual(len(self.mock.send_data_list), 2)
self.assertEqual(self.mock.send_data_list, [b"123456789", b"9"])
def test_send_one_byte(self):
"""
Verify that MockSerial.send() is called again when it returns 0 after being given 1 byte.
Given: A SerialConnection using MockSerial.
When: Calling SerialConnection.send(data) with 1 byte.
and: MockSerial.send() returns: 0, 1.
Then: Verify MockSerial.send() was called exactly 2 times.
and: Verify MockSerial.send() received the expected data each time.
"""
# When
data = b"1"
self.mock.send_return_queue = [0, 1]
self.uut.send(data=data)
# Then
self.assertEqual(len(self.mock.send_data_list), 2)
self.assertEqual(self.mock.send_data_list, [b"1", b"1"])
def test_send_many(self):
"""
Verify that send works properly when MockSerial.send() sends 1 byte at a time.
Given: A SerialConnection using MockSerial.
When: Calling SerialConnection.send(data) with 9 bytes.
and: MockSerial.send() returns: 0, 500 times, followed by len(data).
Then: Verify MockSerial.send() was called exactly 501 times.
and: Verify MockSerial.send() received the expected data each time.
"""
# When
data = b"123456789"
self.mock.send_return_queue = [0] * 500 + [len(data)]
self.uut.send(data=data)
# Then
self.assertEqual(len(self.mock.send_data_list), 501)
self.assertEqual(self.mock.send_data_list, [b"123456789"] * 501)
def test_send_zero_bytes(self):
"""
Verify that send() doesn't fail when given 0 bytes.
Given: A SerialConnection using MockSerial.
When: Calling SerialConnection.send(data) with 0 bytes.
and: MockSerial.send() set to return len(data).
Then: Verify MockSerial.send() was called either 0 or 1 times.
and: Verify MockSerial.send() received 0 bytes, if anything.
"""
# When
data = b""
self.mock.send_return_queue = [0, 1]
self.uut.send(data=data)
# Then
self.assertLessEqual(len(self.mock.send_data_list), 1)
if len(self.mock.send_data_list) == 0:
self.assertEqual(self.mock.send_data_list, [])
else:
self.assertEqual(self.mock.send_data_list, [b""])
###########################################################################
# Receive tests
###########################################################################
def test_recv_simple(self):
"""
Verify that recv() works in the normal case.
Given: A SerialConnection using MockSerial,
with no timeout/message_separator_time/content_checker.
When: User calls SerialConnection.recv.
and: MockSerial.recv set to return data of length max_bytes.
Then: SerialConnection calls MockSerial.recv exactly once.
and: SerialConnection.recv returns exactly what MockSerial.recv returned.
"""
# When
self.mock.recv_return_queue = [b"0123456"]
data = self.uut.recv(max_bytes=7)
# Then
self.assertEqual(self.mock.recv_max_bytes_lengths, [7])
self.assertEqual(data, b"0123456")
def test_recv_max_bytes_only(self):
"""
Verify that recv() calls MockSerial.recv() repeatedly until it gets max_bytes of data.
Given: A SerialConnection using MockSerial,
with no timeout/message_separator_time/content_checker.
When: User calls SerialConnection.recv(10).
and: MockSerial.recv set to return 0, 0, 0, 1, 2, 3, 4 bytes.
Then: SerialConnection calls MockSerial.recv exactly 7 times,
with max_bytes decreasing as appropriate.
and: SerialConnection.recv returns the concatenation of MockSerial.recv() return values.
"""
# When
self.mock.recv_return_queue = [b"", b"", b"", b"1", b"22", b"123", b"1234"]
data = self.uut.recv(max_bytes=10)
# Then
self.assertEqual(self.mock.recv_max_bytes_lengths, [10, 10, 10, 10, 9, 7, 4])
self.assertEqual(data, b"1221231234")
def test_recv_timeout(self):
"""
Verify that recv() returns partial messages after the timeout expires.
Given: A SerialConnection using MockSerial,
with timeout set to a smallish value.
When: User calls SerialConnection.recv(n) several times with different values of n.
and: MockSerial.recv set to return a single message, then repeatedly return nothing.
Then: SerialConnection.recv calls MockSerial.recv at least once.
and: SerialConnection.recv returns the MockSerial.recv() return value after the timeout.
Note: Timeout functionality is tested, but not the precise timing.
"""
self.uut = SerialConnection(timeout=0.001) # 1ms
self.uut._connection = self.mock
# n == 1
self.mock.recv_return_nothing_by_default = True
self.mock.recv_return_queue = [b""]
data = self.uut.recv(max_bytes=1)
self.assertGreaterEqual(len(self.mock.recv_max_bytes_lengths), 1)
self.assertEqual(data, b"")
# n == 2
self.mock.recv_return_nothing_by_default = True
self.mock.recv_return_queue = [b"1"]
data = self.uut.recv(max_bytes=2)
self.assertGreaterEqual(len(self.mock.recv_max_bytes_lengths), 1)
self.assertEqual(data, b"1")
# n == 3, len(data) == 1
self.mock.recv_return_nothing_by_default = True
self.mock.recv_return_queue = [b"1"]
data = self.uut.recv(max_bytes=5)
self.assertGreaterEqual(len(self.mock.recv_max_bytes_lengths), 1)
self.assertEqual(data, b"1")
# n == 3, len(data) == 2
self.mock.recv_return_nothing_by_default = True
self.mock.recv_return_queue = [b"12"]
data = self.uut.recv(max_bytes=3)
self.assertGreaterEqual(len(self.mock.recv_max_bytes_lengths), 1)
self.assertEqual(data, b"12")
# # n == 2**16, len(data) == 2**16 - 1
# self.mock.recv_return_nothing_by_default = True
# self.mock.recv_return_queue = [b'\0'] * (2**16 - 1)
# data = uut.recv(max_bytes=2**16)
# self.assertGreaterEqual(len(self.mock.recv_max_bytes_lengths), 1)
# self.assertEqual(data, [b'\0'] * (2**16 - 1))
def test_recv_message_separator_time(self):
"""
Verify that message_separator_time works correctly.
Receive a message over time t, where t > message_separator_time, and each part of the message is delayed by
t' < message_separator_time.
Given: A SerialConnection using MockSerial,
and: timeout set to 60ms.
and: message_separator_time set 20ms
When: User calls SerialConnection.recv(max_bytes=60).
and: MockSerial.recv set to return increasing bytes.
and: MockSerial.recv set to delay very briefly on each call (0.001ms (1 microsecond)).
Then: SerialConnection.recv calls MockSerial.recv multiple times (more than 2).
and: SerialConnection.recv returns data with multiple bytes (more than 2).
"""
# Given
self.uut = SerialConnection(timeout=0.060, message_separator_time=0.020)
self.uut._connection = self.mock
# When
self.mock.recv_return_queue = [b"1"] * 60
self.mock.recv_wait_times = [0.000001] * 60
data = self.uut.recv(max_bytes=60)
# Then
self.assertGreater(len(self.mock.recv_max_bytes_lengths), 2)
self.assertGreater(len(data), 2)
def test_recv_message_separator_time_2(self):
"""
Verify that message_separator_time works correctly.
Receive a message that times out with message_separator_time, but which would not time out with only a timeout.
Given: A SerialConnection using MockSerial,
and: timeout set to 60ms.
and: message_separator_time set 20ms
When: User calls SerialConnection.recv(60).
and: MockSerial.recv set to return 1 byte, then 1 byte, then 58 bytes.
and: MockSerial.recv set to delay 1ms, then 40ms, then 1ms.
Then: SerialConnection.recv calls MockSerial.recv twice.
and: SerialConnection.recv returns only the first two bytes.
"""
# Given
self.uut = SerialConnection(timeout=0.060, message_separator_time=0.020)
self.uut._connection = self.mock
# When
self.mock.recv_return_queue = [b"1", b"2", b"3" * 58]
self.mock.recv_wait_times = [0.001, 0.040, 0.001]
data = self.uut.recv(max_bytes=60)
# Then
self.assertEqual(len(self.mock.recv_max_bytes_lengths), 2)
self.assertEqual(data, b"12")
def test_recv_message_content_checker(self):
"""
Verify that content_checker is used correctly.
The content_checker indicates how much of a message is valid, if any.
Verify behavior when the content_checker consumes a part of the buffer, the full buffer, and then part of it
again.
Given: A SerialConnection using MockSerial,
and: timeout set to 100ms.
and: message_separator_time set 20ms
and: content_checker set to a function that returns 0, 3, 0, 5, 0, 3
When: User calls SerialConnection.recv(100) 3 times.
and: MockSerial.recv set to return 2 bytes repeatedly.
Then: SerialConnection.recv calls MockSerial.recv 6 times.
and: SerialConnection.recv returns only the first 3 bytes, then the next 5 bytes, then the next 3.
"""
# Given
# PyUnusedLocal suppression: args/kwargs make the method callable by SerialConnection, but are not used.
# noinspection PyUnusedLocal
def test_checker(*args, **kwargs):
"""
:param args: Ignored. Makes method callable with arguments.
:param kwargs: Ignored. Makes method callable with arguments.
:return: 0, 3, 0, 5, 0, 3, 0, 0...
"""
if not hasattr(test_checker, "counter"):
test_checker.counter = 0
test_checker.counter += 1
if test_checker.counter == 2:
return 3
elif test_checker.counter == 4:
return 5
elif test_checker.counter == 6:
return 3
else:
return 0
self.uut = SerialConnection(timeout=0.100, message_separator_time=0.020, content_checker=test_checker)
self.uut._connection = self.mock
# When
self.mock.recv_return_queue = [b"12", b"34", b"56", b"78", b"9A", b"BC"]
data = self.uut.recv(max_bytes=100)
self.assertEqual(len(self.mock.recv_max_bytes_lengths), 2)
self.assertEqual(data, b"123")
data = self.uut.recv(max_bytes=100)
self.assertEqual(len(self.mock.recv_max_bytes_lengths), 4)
self.assertEqual(data, b"45678")
data = self.uut.recv(max_bytes=100)
self.assertEqual(len(self.mock.recv_max_bytes_lengths), 6)
self.assertEqual(data, b"9AB")