def testSphericalCupOnTopOfSubstrate(self):
"""
Compares two simulation intended to provide identical results.
Simulation #1: truncated sphere on top of substrate.
Simulation #2: spherical particle composition crossing the interface.
Bottom part of composition is made from substrate material.
both cases should look like a truncated sphere on top of substrate.
"""
# truncated sphere on top of substrate with height 16nm
truncatedSphere = ba.Particle(
mParticle,
ba.FormFactorTruncatedSphere(sphere_radius,
sphere_radius * 2 - bottom_cup_height,
0))
reference = self.get_result(truncatedSphere)
# Particle composition, top part made of same material, as particle. Bottom part made of same material as substrate.
composition = self.get_composition(mParticle, mSubstrate)
composition_shift = bottom_cup_height
composition.setPosition(0, 0, -composition_shift)
data = self.get_result(composition)
diff = ba.RelativeDifference(data, reference)
print(diff)
self.assertLess(diff, 1e-10)
def testSphericalLacuneInSubstrate(self):
"""
Similar to previous. Truncated sphere and sphere are made of air material.
From scattering point of view, both cases should look like an air lacune in substrate.
"""
sphere_radius = 10.0
sphere_shift = 4.0 # shift beneath interface in absolute units
# Sphere truncated from top. Intended to go below interface.
truncatedSphere = ba.Particle(
mAmbience,
ba.FormFactorTruncatedSphere(sphere_radius, sphere_radius * 2,
sphere_radius * 2 - sphere_shift))
truncatedSphere.setPosition(0, 0, -sphere_shift)
reference = self.get_result(truncatedSphere)
# sphere crossing interface to look like truncated sphere above
sphere = ba.Particle(mAmbience, ba.FormFactorFullSphere(sphere_radius))
sphere.setPosition(0, 0, -sphere_shift)
data = self.get_result(sphere)
diff = ba.RelativeDifference(data, reference)
print(diff)
self.assertLess(diff, 1e-10)
def testSphericalCupOnTopOfSubstrate(self):
"""
Compares two simulation intended to provide identical results.
Simulation #1: truncated sphere on top of substrate.
Simulation #2: spherical particle crossing the interface.
Both particles are made of same material as substrate. From scattering point of view,
both cases should look like a truncated sphere on top of substrate.
"""
sphere_radius = 10.0
sphere_shift = 4.0 # shift beneath interface in absolute units
# truncated sphere on top of substrate with height 16nm
truncatedSphere = ba.Particle(
mSubstrate,
ba.FormFactorTruncatedSphere(sphere_radius,
sphere_radius * 2 - sphere_shift))
reference = self.get_result(truncatedSphere)
# sphere crossing interface to look like truncated sphere above
sphere = ba.Particle(mSubstrate,
ba.FormFactorFullSphere(sphere_radius))
sphere.setPosition(0, 0, -sphere_shift)
data = self.get_result(sphere)
diff = ba.RelativeDifference(data, reference)
print(diff)
self.assertLess(diff, 1e-10)
def testSpheresCrossingInterface(self):
"""
Compares two simulation intended to provide identical results.
Simulation #1: full sphere inserted in air layer to cross interface
Simulation #2: full sphere inserted in substrate layer to cross interface
Both spheres are made of same material.
"""
mParticle = ba.HomogeneousMaterial("Ag", 1.245e-5, 5.419e-7)
sphere_radius = 10.0
sphere_shift = 4.0 # shift beneath interface in absolute units
# Sphere intended for air layer and crossing interface
sphere1 = ba.Particle(mParticle,
ba.FormFactorFullSphere(sphere_radius))
sphere1.setPosition(0, 0, -sphere_shift)
reference = self.get_result(particle_to_air=sphere1)
# Sphere intended for substrate layer and crossing interface
sphere2 = ba.Particle(mParticle,
ba.FormFactorFullSphere(sphere_radius))
sphere2.setPosition(0, 0, -sphere_shift)
data = self.get_result(particle_to_substrate=sphere2)
diff = ba.RelativeDifference(data, reference)
print(diff)
self.assertLess(diff, 1e-10)
def testBoxTransform(self):
"""
Reference box of (10,50,20) size is compared against the box (50,20,10) with two rotations applied to get
reference one
"""
mParticle = ba.HomogeneousMaterial("Ag", 1.245e-5, 5.419e-7)
# reference box
length = 10
width = 50
height = 20
box = ba.Particle(mParticle, ba.FormFactorBox(length, width, height))
box.setPosition(kvector_t(0, 0, -layer_thickness / 2 - height / 2))
reference_data = self.get_result(box)
#IntensityDataIOFactory.writeIntensityData(reference_data, "ref_TransformBox.int")
# second box
length = 50
width = 20
height = 10
box = ba.Particle(mParticle, ba.FormFactorBox(length, width, height))
box.setRotation(ba.RotationZ(90 * deg))
box.rotate(ba.RotationY(90 * deg))
box.setPosition(kvector_t(0, 0, -layer_thickness / 2))
data = self.get_result(box)
diff = ba.RelativeDifference(data, reference_data)
print(diff)
self.assertLess(diff, 1e-10)
def testCompositionBuilds(self):
"""
Compares two simulation intended to provide identical results.
Simulation #1: spherical particle composition on top of substrate
Simulation #2: same, but made using rotation
"""
composition = self.get_composition(mParticle, mSubstrate)
reference = self.get_result(composition)
# spherical composition
composition2 = self.get_composition_v2(mParticle, mSubstrate)
data = self.get_result(composition2)
diff = ba.RelativeDifference(data, reference)
print(diff)
self.assertLess(diff, 1e-10)
def testComposition(self):
"""
Compares two simulation intended to provide identical results.
Simulation #1: spherical particle on top of substrate
Simulation #2: spherical composition on top of substrate, where top and bottom are made of same material
"""
# spherical particle
sphere = ba.Particle(mParticle, ba.FormFactorFullSphere(sphere_radius))
reference = self.get_result(sphere)
# spherical composition
composition = self.get_composition(mParticle, mParticle)
data = self.get_result(composition)
diff = ba.RelativeDifference(data, reference)
print(diff)
self.assertLess(diff, 1e-10)
def testInvisibleComposition(self):
"""
Compares two simulation intended to provide identical results.
Simulation #1: no particles at all
Simulation #2: spherical composition on top of substrate crossing the interface
Bottom part of composition is made of substrate material, top part from vacuum layer material
"""
shift = bottom_cup_height
# Scattering from empty multilayer
reference = self.get_result()
# spherical composition
composition = self.get_composition(mAmbience, mSubstrate)
composition.setPosition(0, 0, -shift)
data = self.get_result(composition)
diff = ba.RelativeDifference(data, reference)
print(diff)
self.assertLess(diff, 1e-10)
def testSlicedComposition(self):
"""
Compares two simulation intended to provide identical results.
Simulation #1: spherical particle on top of substrate
Simulation #2: spherical composition on top of substrate, where top and bottom are made of same material
Both particles are inserted in vacuum layer with shift to go below interface
"""
shift = 3 * nm
# spherical particle
sphere = ba.Particle(mParticle, ba.FormFactorFullSphere(sphere_radius))
sphere.setPosition(0, 0, -shift)
reference = self.get_result(sphere)
# spherical composition
composition = self.get_composition(mParticle, mParticle)
composition.setPosition(0, 0, -shift)
data = self.get_result(composition)
diff = ba.RelativeDifference(data, reference)
print(diff)
self.assertLess(diff, 1e-10)