def __init__(self, mount_type, root_helper,
execute=putils.execute, *args, **kwargs):
self._mount_type = mount_type
if mount_type == "nfs":
self._mount_base = kwargs.get('nfs_mount_point_base', None)
if not self._mount_base:
raise exception.InvalidParameterValue(
err=_('nfs_mount_point_base required'))
self._mount_options = kwargs.get('nfs_mount_options', None)
self._check_nfs_options()
elif mount_type == "cifs":
self._mount_base = kwargs.get('smbfs_mount_point_base', None)
if not self._mount_base:
raise exception.InvalidParameterValue(
err=_('smbfs_mount_point_base required'))
self._mount_options = kwargs.get('smbfs_mount_options', None)
elif mount_type == "glusterfs":
self._mount_base = kwargs.get('glusterfs_mount_point_base', None)
if not self._mount_base:
raise exception.InvalidParameterValue(
err=_('glusterfs_mount_point_base required'))
self._mount_options = None
else:
raise exception.ProtocolNotSupported(protocol=mount_type)
self.root_helper = root_helper
self.set_execute(execute)
def _load_extensions(self):
"""Load extensions specified on the command line."""
extensions = list(self.cls_list)
# NOTE(thingee): Backwards compat for the old extension loader path.
# We can drop this post-grizzly in the H release.
old_contrib_path = ('brick.api.openstack.volume.contrib.'
'standard_extensions')
new_contrib_path = 'brick.api.contrib.standard_extensions'
if old_contrib_path in extensions:
LOG.warn(_('osapi_volume_extension is set to deprecated path: %s'),
old_contrib_path)
LOG.warn(_('Please set your flag or brick.conf settings for '
'osapi_volume_extension to: %s'), new_contrib_path)
extensions = [e.replace(old_contrib_path, new_contrib_path)
for e in extensions]
for ext_factory in extensions:
try:
self.load_extension(ext_factory)
except Exception as exc:
LOG.warn(_('Failed to load extension %(ext_factory)s: '
'%(exc)s'),
{'ext_factory': ext_factory, 'exc': exc})
def create_lv_snapshot(self, name, source_lv_name, lv_type='default'):
"""Creates a snapshot of a logical volume.
:param name: Name to assign to new snapshot
:param source_lv_name: Name of Logical Volume to snapshot
:param lv_type: Type of LV (default or thin)
"""
source_lvref = self.get_volume(source_lv_name)
if source_lvref is None:
LOG.error(_("Trying to create snapshot by non-existent LV: %s")
% source_lv_name)
raise exception.VolumeDeviceNotFound(device=source_lv_name)
cmd = ['lvcreate', '--name', name,
'--snapshot', '%s/%s' % (self.vg_name, source_lv_name)]
if lv_type != 'thin':
size = source_lvref['size']
cmd.extend(['-L', '%sg' % (size)])
try:
self._execute(*cmd,
root_helper=self._root_helper,
run_as_root=True)
except putils.ProcessExecutionError as err:
LOG.exception(_('Error creating snapshot'))
LOG.error(_('Cmd :%s') % err.cmd)
LOG.error(_('StdOut :%s') % err.stdout)
LOG.error(_('StdErr :%s') % err.stderr)
raise
def _error(self, inner, req):
if not isinstance(inner, exception.QuotaError):
LOG.exception(_("Caught error: %s"), unicode(inner))
safe = getattr(inner, 'safe', False)
headers = getattr(inner, 'headers', None)
status = getattr(inner, 'code', 500)
if status is None:
status = 500
msg_dict = dict(url=req.url, status=status)
LOG.info(_("%(url)s returned with HTTP %(status)d") % msg_dict)
outer = self.status_to_type(status)
if headers:
outer.headers = headers
# NOTE(johannes): We leave the explanation empty here on
# purpose. It could possibly have sensitive information
# that should not be returned back to the user. See
# bugs 868360 and 874472
# NOTE(eglynn): However, it would be over-conservative and
# inconsistent with the EC2 API to hide every exception,
# including those that are safe to expose, see bug 1021373
if safe:
msg = (inner.msg if isinstance(inner, exception.BrickException)
else unicode(inner))
params = {'exception': inner.__class__.__name__,
'explanation': msg}
outer.explanation = _('%(exception)s: %(explanation)s') % params
return wsgi.Fault(outer)
def activate_lv(self, name, is_snapshot=False):
"""Ensure that logical volume/snapshot logical volume is activated.
:param name: Name of LV to activate
:raises: putils.ProcessExecutionError
"""
# This is a no-op if requested for a snapshot on a version
# of LVM that doesn't support snapshot activation.
# (Assume snapshot LV is always active.)
if is_snapshot and not self.supports_snapshot_lv_activation:
return
lv_path = self.vg_name + '/' + self._mangle_lv_name(name)
# Must pass --yes to activate both the snap LV and its origin LV.
# Otherwise lvchange asks if you would like to do this interactively,
# and fails.
cmd = ['lvchange', '-a', 'y', '--yes']
if self.supports_lvchange_ignoreskipactivation:
cmd.append('-K')
cmd.append(lv_path)
try:
self._execute(*cmd,
root_helper=self._root_helper,
run_as_root=True)
except putils.ProcessExecutionError as err:
LOG.exception(_('Error activating LV'))
LOG.error(_('Cmd :%s') % err.cmd)
LOG.error(_('StdOut :%s') % err.stdout)
LOG.error(_('StdErr :%s') % err.stderr)
raise
def __init__(self, vg_name, root_helper, create_vg=False,
physical_volumes=None, lvm_type='default',
executor=putils.execute):
"""Initialize the LVM object.
The LVM object is based on an LVM VolumeGroup, one instantiation
for each VolumeGroup you have/use.
:param vg_name: Name of existing VG or VG to create
:param root_helper: Execution root_helper method to use
:param create_vg: Indicates the VG doesn't exist
and we want to create it
:param physical_volumes: List of PVs to build VG on
:param lvm_type: VG and Volume type (default, or thin)
:param executor: Execute method to use, None uses common/processutils
"""
super(LVM, self).__init__(execute=executor, root_helper=root_helper)
self.vg_name = vg_name
self.pv_list = []
self.lv_list = []
self.vg_size = 0.0
self.vg_free_space = 0.0
self.vg_lv_count = 0
self.vg_uuid = None
self.vg_thin_pool = None
self.vg_thin_pool_size = 0.0
self.vg_thin_pool_free_space = 0.0
self._supports_snapshot_lv_activation = None
self._supports_lvchange_ignoreskipactivation = None
if create_vg and physical_volumes is not None:
self.pv_list = physical_volumes
try:
self._create_vg(physical_volumes)
except putils.ProcessExecutionError as err:
LOG.exception(_('Error creating Volume Group'))
LOG.error(_('Cmd :%s') % err.cmd)
LOG.error(_('StdOut :%s') % err.stdout)
LOG.error(_('StdErr :%s') % err.stderr)
raise exception.VolumeGroupCreationFailed(vg_name=self.vg_name)
if self._vg_exists() is False:
LOG.error(_('Unable to locate Volume Group %s') % vg_name)
raise exception.VolumeGroupNotFound(vg_name=vg_name)
# NOTE: we assume that the VG has been activated outside if Brick
if lvm_type == 'thin':
pool_name = "%s-pool" % self.vg_name
if self.get_volume(pool_name) is None:
self.create_thin_pool(pool_name)
else:
self.vg_thin_pool = pool_name
self.activate_lv(self.vg_thin_pool)
self.pv_list = self.get_all_physical_volumes(root_helper, vg_name)
def rename_volume(self, lv_name, new_name):
"""Change the name of an existing volume."""
try:
self._execute('lvrename', self.vg_name, lv_name, new_name,
root_helper=self._root_helper,
run_as_root=True)
except putils.ProcessExecutionError as err:
LOG.exception(_('Error renaming logical volume'))
LOG.error(_('Cmd :%s') % err.cmd)
LOG.error(_('StdOut :%s') % err.stdout)
LOG.error(_('StdErr :%s') % err.stderr)
raise
def extend_volume(self, lv_name, new_size):
"""Extend the size of an existing volume."""
try:
self._execute('lvextend', '-L', new_size,
'%s/%s' % (self.vg_name, lv_name),
root_helper=self._root_helper,
run_as_root=True)
except putils.ProcessExecutionError as err:
LOG.exception(_('Error extending Volume'))
LOG.error(_('Cmd :%s') % err.cmd)
LOG.error(_('StdOut :%s') % err.stdout)
LOG.error(_('StdErr :%s') % err.stderr)
raise
def remove_iscsi_target(self, tid, lun, vol_id, vol_name, **kwargs):
LOG.info(_('Removing iscsi_target: %s') % vol_id)
vol_uuid_name = vol_name
iqn = '%s%s' % (self.iscsi_target_prefix, vol_uuid_name)
try:
self._execute('brick-rtstool',
'delete',
iqn,
run_as_root=True)
except putils.ProcessExecutionError as e:
LOG.error(_("Failed to remove iscsi target for volume "
"id:%s.") % vol_id)
LOG.error("%s" % e)
raise exception.ISCSITargetRemoveFailed(volume_id=vol_id)
def action_peek_json(body):
"""Determine action to invoke."""
try:
decoded = jsonutils.loads(body)
except ValueError:
msg = _("cannot understand JSON")
raise exception.MalformedRequestBody(reason=msg)
# Make sure there's exactly one key...
if len(decoded) != 1:
msg = _("too many body keys")
raise exception.MalformedRequestBody(reason=msg)
# Return the action and the decoded body...
return decoded.keys()[0]
def flush_multipath_devices(self):
try:
self._execute('multipath', '-F', run_as_root=True,
root_helper=self._root_helper)
except putils.ProcessExecutionError as exc:
LOG.warn(_("multipath call failed exit (%(code)s)")
% {'code': exc.exit_code})
def read(self, i=None):
result = self.data.read(i)
self.bytes_read += len(result)
if self.bytes_read > self.limit:
msg = _("Request is too large.")
raise webob.exc.HTTPRequestEntityTooLarge(explanation=msg)
return result
def update_volume_group_info(self):
"""Update VG info for this instantiation.
Used to update member fields of object and
provide a dict of info for caller.
:returns: Dictionaries of VG info
"""
vg_list = self.get_all_volume_groups(self._root_helper, self.vg_name)
if len(vg_list) != 1:
LOG.error(_('Unable to find VG: %s') % self.vg_name)
raise exception.VolumeGroupNotFound(vg_name=self.vg_name)
self.vg_size = float(vg_list[0]['size'])
self.vg_free_space = float(vg_list[0]['available'])
self.vg_lv_count = int(vg_list[0]['lv_count'])
self.vg_uuid = vg_list[0]['uuid']
if self.vg_thin_pool is not None:
for lv in self.get_all_volumes(self._root_helper, self.vg_name):
if lv['name'] == self.vg_thin_pool:
self.vg_thin_pool_size = lv['size']
tpfs = self._get_thin_pool_free_space(self.vg_name,
self.vg_thin_pool)
self.vg_thin_pool_free_space = tpfs
def check_exclusive_options(**kwargs):
"""Checks that only one of the provided options is actually not-none.
Iterates over all the kwargs passed in and checks that only one of said
arguments is not-none, if more than one is not-none then an exception will
be raised with the names of those arguments who were not-none.
"""
if not kwargs:
return
pretty_keys = kwargs.pop("pretty_keys", True)
exclusive_options = {}
for (k, v) in kwargs.iteritems():
if v is not None:
exclusive_options[k] = True
if len(exclusive_options) > 1:
# Change the format of the names from pythonic to
# something that is more readable.
#
# Ex: 'the_key' -> 'the key'
if pretty_keys:
names = [k.replace('_', ' ') for k in kwargs.keys()]
else:
names = kwargs.keys()
names = ", ".join(sorted(names))
msg = (_("May specify only one of %s") % (names))
raise exception.InvalidInput(reason=msg)
def __init__(self, message=None, **kwargs):
self.kwargs = kwargs
if 'code' not in self.kwargs:
try:
self.kwargs['code'] = self.code
except AttributeError:
pass
if not message:
try:
message = self.message % kwargs
except Exception:
# kwargs doesn't match a variable in the message
# log the issue and the kwargs
msg = (_("Exception in string format operation. msg='%s'")
% self.message)
LOG.exception(msg)
for name, value in kwargs.iteritems():
LOG.error("%s: %s" % (name, value))
# at least get the core message out if something happened
message = self.message
# Put the message in 'msg' so that we can access it. If we have it in
# message it will be overshadowed by the class' message attribute
self.msg = message
super(BrickException, self).__init__(message)
def __init__(self, message=None, **kwargs):
self.kwargs = kwargs
if 'code' not in self.kwargs:
try:
self.kwargs['code'] = self.code
except AttributeError:
pass
for k, v in self.kwargs.iteritems():
if isinstance(v, Exception):
self.kwargs[k] = six.text_type(v)
if not message:
try:
message = self.message % kwargs
except Exception:
exc_info = sys.exc_info()
# kwargs doesn't match a variable in the message
# log the issue and the kwargs
LOG.exception(_("Exception in string format operation."))
for name, value in kwargs.iteritems():
LOG.error("%s: %s" % (name, value))
if CONF.fatal_exception_format_errors:
raise exc_info[0], exc_info[1], exc_info[2]
# at least get the core message out if something happened
message = self.message
elif isinstance(message, Exception):
message = six.text_type(message)
# Put the message in 'msg' so that we can access it. If we have it in
# message it will be overshadowed by the class' message attribute
self.msg = message
super(BrickException, self).__init__(message)
def __init__(self, name, loader=None):
"""Initialize, but do not start the WSGI server.
:param name: The name of the WSGI server given to the loader.
:param loader: Loads the WSGI application using the given name.
:returns: None
"""
self.name = name
self.manager = self._get_manager()
self.loader = loader or wsgi.Loader()
self.app = self.loader.load_app(name)
self.host = getattr(CONF, '%s_listen' % name, "0.0.0.0")
self.port = getattr(CONF, '%s_listen_port' % name, 0)
self.workers = getattr(CONF, '%s_workers' % name,
processutils.get_worker_count())
if self.workers < 1:
LOG.warn(_("Value of config option %(name)s_workers must be "
"integer greater than 1. Input value ignored.") %
{'name': name})
# Reset workers to default
self.workers = processutils.get_worker_count()
self.server = wsgi.Server(name,
self.app,
host=self.host,
port=self.port)
def create_iscsi_target(self, name, tid, lun, path,
chap_auth=None, **kwargs):
# NOTE (jdg): Address bug: 1175207
kwargs.pop('old_name', None)
self._new_target(name, tid, **kwargs)
self._new_logicalunit(tid, lun, path, **kwargs)
if chap_auth is not None:
(type, username, password) = chap_auth.split()
self._new_auth(tid, type, username, password, **kwargs)
conf_file = self.iet_conf
if os.path.exists(conf_file):
try:
volume_conf = """
Target %s
%s
Lun 0 Path=%s,Type=%s
""" % (name, chap_auth, path, self._iotype(path))
with utils.temporary_chown(conf_file):
f = open(conf_file, 'a+')
f.write(volume_conf)
f.close()
except putils.ProcessExecutionError as e:
vol_id = name.split(':')[1]
LOG.error(_("Failed to create iscsi target for volume "
"id:%(vol_id)s: %(e)s")
% {'vol_id': vol_id, 'e': e})
raise exception.ISCSITargetCreateFailed(volume_id=vol_id)
return tid
def __call__(self, req):
"""Represents a single call through this middleware.
We should record the request if we have a limit relevant to it.
If no limit is relevant to the request, ignore it. If the request
should be rate limited, return a fault telling the user they are
over the limit and need to retry later.
"""
verb = req.method
url = req.url
context = req.environ.get("brick.context")
if context:
username = context.user_id
else:
username = None
delay, error = self._limiter.check_for_delay(verb, url, username)
if delay:
msg = _("This request was rate-limited.")
retry = time.time() + delay
return wsgi.OverLimitFault(msg, error, retry)
req.environ["brick.limits"] = self._limiter.get_limits(username)
return self.application
def __init__(self, mount_type, root_helper, driver=None,
execute=putils.execute,
device_scan_attempts=DEVICE_SCAN_ATTEMPTS_DEFAULT,
*args, **kwargs):
kwargs = kwargs or {}
conn = kwargs.get('conn')
if conn:
mount_point_base = conn.get('mount_point_base')
if mount_type.lower() == 'nfs':
kwargs['nfs_mount_point_base'] =\
kwargs.get('nfs_mount_point_base') or\
mount_point_base
elif mount_type.lower() == 'glusterfs':
kwargs['glusterfs_mount_point_base'] =\
kwargs.get('glusterfs_mount_point_base') or\
mount_point_base
else:
LOG.warn(_("Connection details not present."
" RemoteFsClient may not initialize properly."))
self._remotefsclient = remotefs.RemoteFsClient(mount_type, root_helper,
execute=execute,
*args, **kwargs)
super(RemoteFsConnector, self).__init__(root_helper, driver=driver,
execute=execute,
device_scan_attempts=
device_scan_attempts,
*args, **kwargs)
def remove_iscsi_target(self, tid, lun, vol_id, vol_name, **kwargs):
LOG.info(_('Removing iscsi_target for volume: %s') % vol_id)
self._delete_logicalunit(tid, lun, **kwargs)
self._delete_target(tid, **kwargs)
vol_uuid_file = vol_name
conf_file = self.iet_conf
if os.path.exists(conf_file):
with utils.temporary_chown(conf_file):
try:
iet_conf_text = open(conf_file, 'r+')
full_txt = iet_conf_text.readlines()
new_iet_conf_txt = []
count = 0
for line in full_txt:
if count > 0:
count -= 1
continue
elif re.search(vol_uuid_file, line):
count = 2
continue
else:
new_iet_conf_txt.append(line)
iet_conf_text.seek(0)
iet_conf_text.truncate(0)
iet_conf_text.writelines(new_iet_conf_txt)
finally:
iet_conf_text.close()
def __init__(self, verb, uri, regex, value, unit):
"""Initialize a new `Limit`.
@param verb: HTTP verb (POST, PUT, etc.)
@param uri: Human-readable URI
@param regex: Regular expression format for this limit
@param value: Integer number of requests which can be made
@param unit: Unit of measure for the value parameter
"""
self.verb = verb
self.uri = uri
self.regex = regex
self.value = int(value)
self.unit = unit
self.unit_string = self.display_unit().lower()
self.remaining = int(value)
if value <= 0:
raise ValueError("Limit value must be > 0")
self.last_request = None
self.next_request = None
self.water_level = 0
self.capacity = self.unit
self.request_value = float(self.capacity) / float(self.value)
msg = _("Only %(value)s %(verb)s request(s) can be "
"made to %(uri)s every %(unit_string)s.")
self.error_message = msg % self.__dict__
def __call__(self, environ, start_response):
r"""Subclasses will probably want to implement __call__ like this:
@webob.dec.wsgify(RequestClass=Request)
def __call__(self, req):
# Any of the following objects work as responses:
# Option 1: simple string
res = 'message\n'
# Option 2: a nicely formatted HTTP exception page
res = exc.HTTPForbidden(explanation='Nice try')
# Option 3: a webob Response object (in case you need to play with
# headers, or you want to be treated like an iterable)
res = Response();
res.app_iter = open('somefile')
# Option 4: any wsgi app to be run next
res = self.application
# Option 5: you can get a Response object for a wsgi app, too, to
# play with headers etc
res = req.get_response(self.application)
# You can then just return your response...
return res
# ... or set req.response and return None.
req.response = res
See the end of http://pythonpaste.org/webob/modules/dec.html
for more info.
"""
raise NotImplementedError(_('You must implement __call__'))
def attach(self, *slaves):
"""Attach one or more slave templates.
Attaches one or more slave templates to the master template.
Slave templates must have a root element with the same tag as
the master template. The slave template's apply() method will
be called to determine if the slave should be applied to this
master; if it returns False, that slave will be skipped.
(This allows filtering of slaves based on the version of the
master template.)
"""
slave_list = []
for slave in slaves:
slave = slave.wrap()
# Make sure we have a tree match
if slave.root.tag != self.root.tag:
msg = (_("Template tree mismatch; adding slave %(slavetag)s "
"to master %(mastertag)s") %
{'slavetag': slave.root.tag,
'mastertag': self.root.tag})
raise ValueError(msg)
# Make sure slave applies to this template
if not slave.apply(self):
continue
slave_list.append(slave)
# Add the slaves
self.slaves.extend(slave_list)
def get_fc_hbas(self):
"""Get the Fibre Channel HBA information."""
out = None
try:
out, err = self._execute('systool', '-c', 'fc_host', '-v',
run_as_root=True,
root_helper=self._root_helper)
except putils.ProcessExecutionError as exc:
# This handles the case where rootwrap is used
# and systool is not installed
# 96 = nova.cmd.rootwrap.RC_NOEXECFOUND:
if exc.exit_code == 96:
LOG.warn(_("systool is not installed"))
return []
except OSError as exc:
# This handles the case where rootwrap is NOT used
# and systool is not installed
if exc.errno == errno.ENOENT:
LOG.warn(_("systool is not installed"))
return []
# No FC HBAs were found
if out is None:
return []
lines = out.split('\n')
# ignore the first 2 lines
lines = lines[2:]
hbas = []
hba = {}
lastline = None
for line in lines:
line = line.strip()
# 2 newlines denotes a new hba port
if line == '' and lastline == '':
if len(hba) > 0:
hbas.append(hba)
hba = {}
else:
val = line.split('=')
if len(val) == 2:
key = val[0].strip().replace(" ", "")
value = val[1].strip()
hba[key] = value.replace('"', '')
lastline = line
return hbas
def __iter__(self):
for chunk in self.data:
self.bytes_read += len(chunk)
if self.bytes_read > self.limit:
msg = _("Request is too large.")
raise webob.exc.HTTPRequestEntityTooLarge(explanation=msg)
else:
yield chunk
def show_target(self, tid, iqn=None, **kwargs):
if iqn is None:
raise exception.InvalidParameterValue(
err=_('valid iqn needed for show_target'))
tid = self._get_target(iqn)
if tid is None:
raise exception.NotFound()
def flush_multipath_device(self, device):
try:
LOG.debug("Flush multipath device %s" % device)
self._execute('multipath', '-f', device, run_as_root=True,
root_helper=self._root_helper)
except putils.ProcessExecutionError as exc:
LOG.warn(_("multipath call failed exit (%(code)s)")
% {'code': exc.exit_code})
def construct(self):
"""Construct a template.
Called to construct a template instance, which it must return.
Only called once.
"""
raise NotImplementedError(_("subclasses must implement construct()!"))
def start(self, interval, initial_delay=None):
while not self._stop:
try:
self.f(*self.args, **self.kw)
except loopingcall.LoopingCallDone:
return self
except Exception:
LOG.exception(_('in fixed duration looping call'))
raise
class ProtocolNotSupported(BrickException):
message = _("Connect to volume via protocol %(protocol)s not supported.")
def _set_read_deleted(self, read_deleted):
if read_deleted not in ('no', 'yes', 'only'):
raise ValueError(
_("read_deleted can only be one of 'no', "
"'yes' or 'only', not %r") % read_deleted)
self._read_deleted = read_deleted
def __init__(self, application):
LOG.warn(_('brick is deprecated. Please ' 'use brick instead.'))
# Avoid circular imports from here. Can I just remove this class?
from brick.api.middleware import fault
super(FaultWrapper, self).__init__(fault.FaultWrapper(application))
class PasteAppNotFound(NotFound):
message = _("Could not load paste app '%(name)s' from %(path)s")
class InvalidParameterValue(Invalid):
message = _("%(err)s")
class NoFibreChannelVolumeDeviceFound(BrickException):
message = _("Unable to find a Fibre Channel volume device.")
class NoFibreChannelHostsFound(BrickException):
message = _("We are unable to locate any Fibre Channel devices.")
class VolumeGroupNotFound(BrickException):
message = _('Unable to find Volume Group: %(vg_name)s')
class VolumeDeviceNotFound(BrickException):
message = _("Volume device not found at %(device)s.")
class ISCSITargetCreateFailed(BrickException):
message = _("Failed to create iscsi target for volume %(volume_id)s.")
class VolumeGroupCreationFailed(BrickException):
message = _('Failed to create Volume Group: %(vg_name)s')
class ISCSITargetRemoveFailed(BrickException):
message = _("Failed to remove iscsi target for volume %(volume_id)s.")
class ISCSITargetAttachFailed(BrickException):
message = _("Failed to attach iSCSI target for volume %(volume_id)s.")
def __init__(self, ext_mgr=None):
LOG.warn(_('brick.api.openstack.volume:APIRouter is deprecated. '
'Please use brick.api.v1.router:APIRouter instead.'))
super(APIRouter, self).__init__(ext_mgr)
class Invalid(BrickException):
message = _("Unacceptable parameters.")
code = 400
def index(self, req):
LOG.info(_("API get_Connector called"))
connector = self.manager.get_connector()
LOG.debug("Connector: %s" % connector)
return {"connector": connector}
class NotFound(BrickException):
message = _("Resource could not be found.")
code = 404
safe = True
def find_multipath_device(self, device):
"""Find a multipath device associated with a LUN device name.
device can be either a /dev/sdX entry or a multipath id.
"""
mdev = None
devices = []
out = None
try:
(out, err) = self._execute('multipath',
'-l',
device,
run_as_root=True,
root_helper=self._root_helper)
except putils.ProcessExecutionError as exc:
LOG.warn(
_("multipath call failed exit (%(code)s)") %
{'code': exc.exit_code})
return None
if out:
lines = out.strip()
lines = lines.split("\n")
if lines:
line = lines[0]
info = line.split(" ")
# device line output is different depending
# on /etc/multipath.conf settings.
if info[1][:2] == "dm":
mdev = "/dev/%s" % info[1]
mdev_id = info[0]
elif info[2][:2] == "dm":
mdev = "/dev/%s" % info[2]
mdev_id = info[1].replace('(', '')
mdev_id = mdev_id.replace(')', '')
if mdev is None:
LOG.warn(
_("Couldn't find multipath device %(line)s") %
{'line': line})
return None
LOG.debug("Found multipath device = %(mdev)s" % {'mdev': mdev})
device_lines = lines[3:]
for dev_line in device_lines:
if dev_line.find("policy") != -1:
continue
dev_line = dev_line.lstrip(' |-`')
dev_info = dev_line.split()
address = dev_info[0].split(":")
dev = {
'device': '/dev/%s' % dev_info[1],
'host': address[0],
'channel': address[1],
'id': address[2],
'lun': address[3]
}
devices.append(dev)
if mdev is not None:
info = {"device": mdev, "id": mdev_id, "devices": devices}
return info
return None
