def test_simple_glue(self):
s1 = cm.box(2.0, 2.0, 2.0)
s1.translate((-2.0, -1.0, -1.0))
s2 = cm.box(2.0, 2.0, 2.0)
s2.translate((0.0, -1.0, -1.0))
f1 = s1.nearest('face', [(0.0, 0.0, 0.0)])[0]
f2 = s2.nearest('face', [(0.0, 0.0, 0.0)])[0]
s3 = cm.glue(s1, s2, [(f1, f2)])
v3 = s3.volume()
self.assert_(close(v3, 2 * 2.0 * 2.0 * 2.0))
def test_chamfer_cut(self):
# sphere had trouble
s1 = cm.box(2.0, 2.0, 2.0)
s1.translate((-1.0, -1.0, -1.0))
s2 = cm.box(4.0, 4.0, 4.0)
s2.translate((0.0, -2.0, -2.0))
s3 = cm.chamfer_cut(s1, s2, 0.25)
v3 = s3.volume()
#print v3, 0.5*2.0*2.0*2.0
# empirical
self.assert_(close(v3, 0.5 * 2.0 * 2.0 * 2.0 - 0.229, 0.1))
def boolean_glue():
s1 = cm.box(1.0, 2.0, 3.0)
s2 = cm.box(1.0, 1.0, 1.0)
s2.translate((1.0, 0.5, 1.0))
faces_s1 = s1.subshapes('face')
faces_s2 = s2.subshapes('face')
i1 = s1.nearest('face', [(1.0, 1.0, 1.5)])[0]
i2 = s2.nearest('face', [(1.0, 1.0, 1.5)])[0]
print 'glue faces', i1, i2
s3 = cm.glue(s1, s2, [(i1, i2)])
save_iso(s3, 'boolean_glue.png')
def logging_solid_fillet():
s1 = cm.box(1.0, 1.0, 1.0)
s1.fillet(0.25, [(1.0, 0.5, 0.0),
(1.0, 0.5, 1.0),
(1.0, 0.0, 0.5),
(1.0, 1.0, 0.5)])
save_iso(s1, 'logging_solid_fillet.png')
def logging_solid_chamfer():
s1 = cm.box(1.0, 1.0, 1.0)
s1.chamfer(0.25, [(1.0, 0.5, 0.0),
(1.0, 0.5, 1.0),
(1.0, 0.0, 0.5),
(1.0, 1.0, 0.5)])
save_iso(s1, 'logging_solid_chamfer.png')
def cube_face():
s1 = cm.box(1.0, 1.0, 1.0)
subs = s1.subshapes('face')
#_cube_subs(s1, subs, 'cube_face.png')
_cube_sub(s1,
subs[s1.nearest('face', [(1.0, 0.5, 0.5)])[0]],
'cube_face.png')
def cube_wire():
s1 = cm.box(1.0, 1.0, 1.0)
faces = s1.subshapes('face')
face = faces[s1.nearest('face', [(1.0, 0.5, 0.5)])[0]]
w1 = face.subshapes('wire')[0]
#_cube_subs(s1, subs, 'cube_wire.png')
_cube_sub(s1, w1, 'cube_wire.png')
def cube_vertex():
s1 = cm.box(1.0, 1.0, 1.0)
subs = s1.subshapes('vertex')
#_cube_subs(s1, subs, 'cube_vertex.png')
_cube_sub(s1,
subs[s1.nearest('vertex', [(1.0, 0.0, 1.0)])[0]],
'cube_vertex.png')
def test_subshapes(self):
s1 = cm.box(1.0, 2.0, 3.0).subshapes('shell')[0]
fs = s1.subshapes('face')
ws = s1.subshapes('wire')
es = s1.subshapes('edge')
vs = s1.subshapes('vertex')
self.assert_(len(vs) == 8 and len(es) == 12 and len(ws) == 6 and
len(fs) == 6)
def main():
s1 = cm.sphere(1.0)
s2 = cm.box(1.0, 2.0, 3.0)
s2.translate((2.0, 0.0, 0.0))
v1 = cd.view()
v1.display(s1)
v1.display(s2)
cd.start()
def test_to_iges(self):
s1 = cm.box(1.0, 2.0, 3.0).subshapes('shell')[0]
r1 = s1.area()
s1.to_iges('tmp.igs', brep_mode=1)
s2 = cm.from_iges('tmp.igs')
r2 = s2.area()
self.assert_(close(r1, 22.0) and
close(r2, 22.0))
def test_to_iges(self):
s1 = cm.box(1.0, 2.0, 3.0)
r1 = s1.volume()
s1.to_iges('tmp.igs', brep_mode=1)
s2 = cm.from_iges('tmp.igs')
r2 = s2.volume()
self.assert_(close(r1, 6.0) and
close(r2, 6.0))
def test_to_step(self):
s1 = cm.box(1.0, 2.0, 3.0).subshapes('shell')[0]
r1 = s1.area()
s1.to_step('tmp.stp')
s2 = cm.from_step('tmp.stp')
r2 = s2.area()
self.assert_(close(r1, 22.0) and
close(r2, 22.0))
def test_to_step(self):
s1 = cm.box(1.0, 2.0, 3.0)
r1 = s1.volume()
s1.to_step('tmp.stp')
s2 = cm.from_step('tmp.stp')
r2 = s2.volume()
self.assert_(close(r1, 6.0) and
close(r2, 6.0))
def test_slice(self):
b1 = cm.box(10.0, 10.0, 10.0)
b1.translate((-5.0, -5.0, 0.0))
c1 = cm.cylinder(2.5, 20.0)
c1.translate((0.0, 0.0, -5.0))
s1 = b1 - c1
f1 = cm.slice(s1, z=1.0)[0]
self.assert_(close(100.0 - math.pi * 2.5 ** 2, f1.area(), 0.001))
def trms_translate():
s1 = cm.box(1.0, 2.0, 3.0)
s2 = cm.translated(s1, (2.0, -6.0, 4.0))
v.viewstandard(viewtype='iso')
v.display(s1, (1.0, 0.0, 0.0))
v.display(s2, (0.0, 0.0, 1.0))
v.fit()
v.save('trms_translate.png')
v.clear()
def display_display():
s1 = cm.sphere(1.0) + cm.box(1.0, 2.0, 2.0)
v.display(s1,
color=(1.0, 0.0, 0.0),
material='metallized',
transparency=0.5)
v.fit()
v.save('display_display.png')
v.clear()
def test_simplify(self):
s1 = cm.box(1.0, 1.0, 1.0)
s2 = s1.copy()
s2.translate((1.0, 0.5, 0.5))
s3 = s1 - s2
count1 = len(s3.subshapes('face'))
s3.simplify()
count2 = len(s3.subshapes('face'))
self.assert_(count1 == 7 and count2 == 6)
def trms_mirror():
s1 = cm.box(1.0, 2.0, 3.0)
s2 = cm.mirrored(s1, (0.0, 0.0, 0.0), (1.0, 0.0, 0.0))
v.viewstandard(viewtype='iso')
v.display(s1, (1.0, 0.0, 0.0))
v.display(s2, (0.0, 0.0, 1.0))
v.fit()
v.save('trms_mirror.png')
v.clear()
def test_subcenters(self):
s1 = cm.box(1.0, 2.0, 3.0)
cs = s1.subcenters('face')
center = [0.0, 0.0, 0.0]
for c in cs:
center[0] = center[0] + c[0]
center[1] = center[1] + c[1]
center[2] = center[2] + c[2]
self.assert_(close(center, (6.0 * 0.5, 6.0 * 1.0, 6.0 * 1.5)))
def trms_rotate():
s1 = cm.box(1.0, 2.0, 3.0)
s2 = cm.rotated(s1, (0.0, 0.0, 0.0), (0.0, 0.0, 1.0), math.pi / 2)
v.viewstandard(viewtype='iso')
v.display(s1, (1.0, 0.0, 0.0))
v.display(s2, (0.0, 0.0, 1.0))
v.fit()
v.save('trms_rotate.png')
v.clear()
def logging_solid_draft():
s1 = cm.box(1.0, 1.0, 1.0)
s1.translate((-0.5, -0.5, 0.0))
face_centers = s1.subcenters('face')
to_draft = []
for count, face_center in enumerate(face_centers):
if abs(face_center[2] - 0.5) < 0.1:
to_draft.append(count)
s1.draft(math.radians(5.0), (0.0, 0.0, 1.0), (0.0, 0.0, 0.0), to_draft)
save_iso(s1, 'logging_solid_draft.png')
def test_fillet_common(self):
s1 = cm.sphere(1.0)
s2 = cm.box(4.0, 4.0, 4.0)
s2.translate((0.0, -2.0, -2.0))
s3 = cm.fillet_common(s1, s2, 0.25)
v3 = s3.volume()
#print v3, 0.5*4.0/3.0*math.pi*1.0**3
# empirical
self.assert_(close(v3,
0.5 * 4.0 / 3.0 * math.pi * 1.0 ** 3 - 0.127, 0.1))
def logging_solid_simplify():
s1 = cm.box(1.0, 1.0, 1.0)
s2 = s1.copy()
s2.translate((1.0, 0.5, 0.5))
s3 = s1 - s2
print len(s3.subshapes('face'))
save_iso(s3, 'logging_solid_simplify1.png')
s3.simplify()
print len(s3.subshapes('face'))
save_iso(s3, 'logging_solid_simplify2.png')
def test_chamfer_fuse(self):
s1 = cm.sphere(1.0)
s2 = cm.box(4.0, 4.0, 4.0)
s2.translate((0.0, -2.0, -2.0))
s3 = cm.chamfer_fuse(s1, s2, 0.25)
v3 = s3.volume()
#print v3, 4.0*4.0*4.0 + 0.5*4.0/3.0*math.pi*1.0**3
# empirical
self.assert_(close(v3,
0.2 + 4.0 * 4.0 * 4.0 +
0.5 * 4.0 / 3.0 * math.pi * 1.0 ** 3, 0.1))
def test_draft(self):
s1 = cm.box(1.0, 1.0, 1.0)
s1.translate((-0.5, -0.5, 0.0))
face_centers = s1.subcenters('face')
to_draft = []
for count, face_center in enumerate(face_centers):
if abs(face_center[2] - 0.5) < 0.1:
to_draft.append(count)
s1.draft(math.radians(5.0), (0.0, 0.0, 1.0), (0.0, 0.0, 0.0), to_draft)
#print 'draft', s1.volume()
# empirical
self.assert_(close(s1.volume(), 0.835, eps=0.001))
def derived_slice():
b1 = cm.box(10.0, 10.0, 10.0)
b1.translate((-5.0, -5.0, 0.0))
c1 = cm.cylinder(2.5, 20.0)
c1.translate((0.0, 0.0, -5.0))
s1 = b1 - c1
f1 = cm.slice(s1, z=1.0)[0]
v.viewstandard(viewtype='top')
v.display(f1)
v.fit()
v.save('derived_slice.png')
v.clear()
def test_offset(self):
w1 = cm.ngon(8.0, 6)
f1 = cm.offset(cm.plane(w1), 1.0)[0]
b1 = cm.box(10.0, 10.0, 10.0)
b1.translate((-5.0, -5.0, 0.0))
c1 = cm.cylinder(2.5, 20.0)
c1.translate((0.0, 0.0, -5.0))
s1 = b1 - c1
s2 = cm.offset(s1, 1.0)[0]
# empirical
self.assert_(close(217.418, f1.area(), 0.001) and
close(1608.966, s2.volume(), 0.001))
def test_cut(self):
s1 = cm.sphere(1.0)
s2 = cm.box(2.0, 2.0, 2.0)
s2.translate((0.0, -1.0, -1.0))
s3 = cm.cut(s1, s2)
v3new = s3.volume()
s3 = cm.old_cut(s1, s2)
v3old = s3.volume()
s3 = s1 - s2
v3op = s3.volume()
value = 0.5 * 4.0 / 3.0 * math.pi * 1.0 ** 3
self.assert_(close(v3new, value) and
close(v3old, value) and
close(v3op, value))
def derived_offset_solid():
b1 = cm.box(10.0, 10.0, 10.0)
b1.translate((-5.0, -5.0, 0.0))
c1 = cm.cylinder(2.5, 20.0)
c1.translate((0.0, 0.0, -5.0))
s1 = b1 - c1
s2 = cm.offset(s1, 1.0)[0]
v.viewstandard(viewtype='iso')
v.display(s1, (1.0, 0.0, 0.0))
edges = s1.subshapes('edge')
for edge in edges:
v.display(edge, (0.0, 0.0, 0.0))
v.display(s2, transparency=0.5)
v.fit()
v.save('derived_offset_solid.png')
v.clear()
def test_subtolerance(self):
s1 = cm.box(1.0, 2.0, 3.0).subshapes('Shell')[0]
subtols = s1.subtolerance()
self.assert_(close(subtols, (1e-7, 1e-7, 1e-7), eps=1e-9))
def test_dump(self):
s1 = cm.box(1.0, 2.0, 3.0).subshapes('Shell')[0]
s1.dump()
self.assert_(True)
def example1():
import numpy as np
unit = 5.0
height = 10.0
draft = 1.0 # degrees of draft on faces for plastic ejection
knob_rad = 1.8 # radius of the brick knob for mating with other bricks
knob_height = 2.0
knob_draft = 5.0 # degrees of draft for the knob
wall_thickness = 1.0 # plastic wall thickness
fillet_rad = 0.4 # the default radius to use for rounded edges
xsize = 4
ysize = 2
outerbrick = solidbrick(xsize,
ysize,
0.0,
unit,
height,
draft,
knob_rad,
knob_height,
knob_draft,
save_images=1)
to_fillet = []
for count, edge_center in enumerate(outerbrick.subcenters('edge')):
if (abs(edge_center[2]) < 0.1
or (abs(edge_center[2] - height) < 0.1
and abs(edge_center[0] - (0.5 * unit)) % unit < 0.1
and abs(edge_center[1] - (0.5 * unit)) % unit < 0.1)):
pass
else:
to_fillet.append(count)
outerbrick.fillet(fillet_rad, to_fillet)
v.clear()
v.display(outerbrick)
v.fit()
v.save('example1_outerbrick.png')
innerbrick = solidbrick(xsize, ysize, wall_thickness, unit,
height - wall_thickness, draft,
knob_rad - wall_thickness, knob_height, knob_draft)
base = cm.box(2 * unit * xsize, 2 * unit * ysize, 1.0)
base.translate((-0.5 * unit * xsize, -0.5 * unit * ysize, -1.0))
innerbrick = innerbrick + base
v.clear()
v.display(innerbrick)
v.fit()
v.save('example1_innerbrick.png')
to_fillet = []
for count, edge_center in enumerate(innerbrick.subcenters('edge')):
if (abs(edge_center[2]) < 0.1
or (abs(edge_center[2] - (height - wall_thickness)) < 0.1
and abs(edge_center[0] - (0.5 * unit)) % unit < 0.1
and abs(edge_center[1] - (0.5 * unit)) % unit < 0.1)):
to_fillet.append(count)
innerbrick.fillet(fillet_rad, to_fillet)
v.clear()
v.display(innerbrick)
v.fit()
v.save('example1_innerbrickfillet.png')
brick = outerbrick - innerbrick
v.clear()
v.display(brick)
v.set_projection((0.0, 0.0, 0.0),
(math.sqrt(0.45), -math.sqrt(0.1), -math.sqrt(0.45)),
(0.0, -1.0, 0.0))
v.fit()
v.save('example1_brick.png')
post_rad = (math.sqrt(2.0) * unit - 2 * knob_rad) / 2.0
drad = (height - 0.5 * wall_thickness) * math.tan(math.radians(draft))
post_base_rad = post_rad + drad
post = cm.cone(post_rad, post_base_rad, height - 0.5 * wall_thickness)
post.fillet(fillet_rad, [(0.0, 0.0, 0.0)])
v.clear()
v.display(post)
v.viewstandard(viewtype='iso')
v.fit()
v.save('example1_post.png')
post.translate((unit, unit, 0.0))
for x in range(xsize - 1):
for y in range(ysize - 1):
brick = brick + cm.translated(post, (x * unit, y * unit, 0.0))
v.clear()
v.display(brick)
v.viewstandard(viewtype='bottom')
v.fit()
v.save('example1_brickpost.png')
brick_images.generate_images(4, 2)
def logging_solid_fillet():
s1 = cm.box(1.0, 1.0, 1.0)
s1.fillet(0.25, [(1.0, 0.5, 0.0), (1.0, 0.5, 1.0), (1.0, 0.0, 0.5),
(1.0, 1.0, 0.5)])
save_iso(s1, 'logging_solid_fillet.png')
def test_fix(self):
s1 = cm.box(1.0, 2.0, 3.0)
s1.fix()
self.assert_(close(s1.center(), (0.5, 1.0, 1.5)))
def test_to_stl(self):
s1 = cm.box(1.0, 2.0, 3.0)
s1.to_stl('tmp.stl')
self.assert_(True)
def test_nearest(self):
s1 = cm.box(1.0, 2.0, 3.0)
i1 = s1.nearest('Vertex', [(1.0, 2.0, 3.0)])[0]
self.assert_(
close(s1.subshapes('Vertex')[i1].center(), (1.0, 2.0, 3.0)))
# e = 15
# l = 20
# w = 30
input = {"e": 5, "l": 20, "w": 30}
e = input["e"]
l = input["l"]
w = input["w"]
hole_d = 2
hole_positions = ((l / 4, -w / 4), (l / 4, w / 4), (-l / 4, -w / 4), (-l / 4,
w / 4))
plate = translated(box(l, w, e), (-l / 2, -w / 2, 0))
cylinders = list()
for (x, y) in hole_positions:
cylinders.append(translated(cylinder(hole_d / 2., e), (x, y, 0)))
for c in cylinders:
plate -= c
__shape__ = plate.shape
__anchors__ = dict()
for i, (x, y) in enumerate(hole_positions, 1):
__anchors__[str(i)] = {
"p": (x, y, e),
def cube_edge():
s1 = cm.box(1.0, 1.0, 1.0)
subs = s1.subshapes('edge')
#_cube_subs(s1, subs, 'cube_edge.png')
_cube_sub(s1, subs[s1.nearest('edge', [(1.0, 0.5, 1.0)])[0]],
'cube_edge.png')
def test_bounds(self):
s1 = cm.box(1.0, 2.0, 3.0)
self.assert_(
close(s1.bounds(), (0.0, 0.0, 0.0, 1.0, 2.0, 3.0), eps=0.1))
def solid_box():
s1 = cm.box(1.0, 2.0, 3.0)
save_iso(s1, 'solid_box.png')
def test_check(self):
s1 = cm.box(1.0, 2.0, 3.0)
self.assert_(s1.check())
def boolean_cut():
s1 = cm.sphere(1.0)
s2 = cm.box(1.0, 2.0, 3.0)
s3 = s1 - s2
save_iso(s3, 'boolean_cut.png')
def test_dump(self):
s1 = cm.box(1.0, 2.0, 3.0)
s1.dump()
self.assert_(True)
def test_bounding_box(self):
s1 = cm.box(2.0, 3.0, 4.0)
# bbs1 = s1.bounding_box()
_ = s1.bounding_box()
def test_subtolerance(self):
s1 = cm.box(1.0, 2.0, 3.0)
subtols = s1.subtolerance()
self.assert_(close(subtols, (1e-7, 1e-7, 1e-7), eps=1e-9))
def test_box(self):
s1 = cm.box(1.0, 2.0, 3.0)
self.assert_(close(6.0, s1.volume()))
def cube_vertex():
s1 = cm.box(1.0, 1.0, 1.0)
subs = s1.subshapes('vertex')
# _cube_subs(s1, subs, 'cube_vertex.png')
_cube_sub(s1, subs[s1.nearest('vertex', [(1.0, 0.0, 1.0)])[0]],
'cube_vertex.png')
def test_scaledz(self):
s1 = cm.box(1.0, 2.0, 3.0)
s2 = cm.scaledz(s1, 2.0)
v2 = (1.0 * 1.0) * (2.0 * 1.0) * (3.0 * 2.0)
self.assert_(close(v2, s2.volume()))
def boolean_fuse():
s1 = cm.sphere(1.0)
s2 = cm.box(1.0, 2.0, 3.0)
s3 = s1 + s2
save_iso(s3, 'boolean_fuse.png')
def test_bounds(self):
s1 = cm.box(1.0, 2.0, 3.0).subshapes('Shell')[0]
self.assert_(
close(s1.bounds(), (0.0, 0.0, 0.0, 1.0, 2.0, 3.0), eps=0.1))
def boolean_common():
s1 = cm.sphere(1.0)
s2 = cm.box(1.0, 2.0, 3.0)
s3 = s1 & s2
save_iso(s3, 'boolean_common.png')
def test_check(self):
s1 = cm.box(1.0, 2.0, 3.0).subshapes('Shell')[0]
self.assert_(s1.check())
def logging_solid_chamfer():
s1 = cm.box(1.0, 1.0, 1.0)
s1.chamfer(0.25, [(1.0, 0.5, 0.0), (1.0, 0.5, 1.0), (1.0, 0.0, 0.5),
(1.0, 1.0, 0.5)])
save_iso(s1, 'logging_solid_chamfer.png')
def test_fix(self):
s1 = cm.box(1.0, 2.0, 3.0).subshapes('Shell')[0]
s1.fix()
self.assert_(close(s1.center(), (0.5, 1.0, 1.5)))
def cube_solid():
s1 = cm.box(1.0, 1.0, 1.0)
# _cube_subs(s1, [], 'cube_solid.png')
_cube_sub(s1, None, 'cube_solid.png')
def test_copy(self):
s1 = cm.box(1.0, 2.0, 3.0)
s2 = s1.copy()
s1.translate((1.0, 1.0, 1.0))
self.assert_(close(s2.center(), (0.5, 1.0, 1.5)) and
close(s1.center(), (1.5, 2.0, 2.5)))
