def del_lc_debug(cluster: Ceph, build: str) -> None:
"""
Modifies the RGW conf files to support lifecycle actions.
Args:
cluster: The cluster participating in the tests.
build: The RHCS build version
Raises:
CommandFailed: Whenever a command returns a non-zero value part of the method.
"""
node = cluster.get_nodes(role="rgw")[0]
commands = [
"sed -i '/rgw_lc_debug_interval/d' /etc/ceph/ceph.conf",
"systemctl restart ceph-radosgw.target",
]
if build.startswith("5"):
node = cluster.get_nodes(role="client")[0]
rgw_service_name = _get_rgw_service_name(cluster)
commands = [
"ceph config rm client.rgw.* rgw_lc_debug_interval",
f"ceph orch restart {rgw_service_name}",
]
for cmd in commands:
node.exec_command(sudo=True, cmd=cmd)
def rgw_frontend_port(cluster: Ceph, build: str) -> str:
"""
Return the configured port number of RadosGW.
For prior versions of RHCS 5.0, the port number is determined using the ceph.conf
and for the higher versions, the value is retrieved from cephadm.
Note: In case of RHCS 5.0, we assume that the installer node is provided.
Args:
cluster: The cluster participating in the test.
build: RHCS version string.
Returns:
port_number: The configured port number
"""
node = cluster.get_nodes(role="rgw")[0]
if build.startswith("5"):
node = cluster.get_nodes(role="client")[0]
# Allow realm & zone variability hence using config dump instead of config-key
cmd1 = "ceph config dump | grep client.rgw | grep port | head -n 1"
cmd2 = "cut -d '=' -f 2 | cut -d ' ' -f 1"
command = f"{cmd1} | {cmd2}"
else:
# To determine the configured port, the line must start with rgw frontends
# in ceph.conf. An example is given below,
#
# rgw frontends = civetweb port=192.168.122.199:8080 num_threads=100
cmd1 = "grep -e '^rgw frontends' /etc/ceph/ceph.conf"
cmd2 = "cut -d ':' -f 2 | cut -d ' ' -f 1"
command = f"{cmd1} | {cmd2}"
out, _ = node.exec_command(sudo=True, cmd=command)
return out.read().decode().strip()
def _rgw_lc_debug_conf(cluster: Ceph, add: bool = True) -> None:
"""
Modifies the LC debug config entry based on add being set or unset.
The LC debug value is set in ceph conf file
Args:
cluster The cluster participating in the tests.
add If set, the config flag is added else removed
Returns:
None
"""
if add:
command = (
r"sed -i '/\[global\]/a rgw lc debug interval = 10' /etc/ceph/ceph.conf"
)
else:
command = "sed -i '/rgw lc debug interval/d' /etc/ceph/ceph.conf"
command += " && systemctl restart ceph-radosgw@rgw.`hostname -s`.rgw0.service"
for node in cluster.get_nodes(role="rgw"):
node.exec_command(sudo=True, cmd=command)
# Service restart can take time
sleep(60)
log.debug("Lifecycle dev configuration set to 10")
def run(ceph_cluster: Ceph, config: Dict, **kwargs) -> int:
"""
Entry point for module execution.
Args:
ceph_cluster The cluster participating in the test.
config Configuration passed to the test
kwargs Additional configurations passed to the test.
Returns:
0 on Success else 1
Raises:
CommandFailure
Example:
- test:
abort-on-fail: false
config:
install:
- agent
desc: Install and configure vault agent
module: install_vault.py
name: install vault agent
"""
if "agent" in config["install"]:
vault_cfg = get_cephci_config().get("vault")
_install_agent(ceph_cluster, vault_cfg)
client = ceph_cluster.get_nodes(role="client")[0]
_configure_rgw_daemons(client, vault_cfg)
return 0
def _get_rgw_service_name(cluster: Ceph) -> str:
"""Return the RGW service name."""
node = cluster.get_nodes(role="client")[0]
cmd_ = "ceph orch ls rgw --format json"
out, err = node.exec_command(sudo=True, cmd=cmd_)
json_out = json.loads(out.read().decode().strip())
return json_out[0]["service_name"]
def execute_teardown(cluster: Ceph, build: str) -> None:
"""
Execute the test teardown phase.
"""
command = "rm -rf s3-tests"
node = cluster.get_nodes(role="client")[0]
node.exec_command(sudo=True, cmd=command)
del_lc_debug(cluster, build)
def create_s3_conf(
cluster: Ceph,
build: str,
host: str,
port: str,
secure: bool,
kms_keyid: Optional[str] = None,
) -> None:
"""
Generate the S3TestConf for test execution.
Args:
cluster The cluster participating in the test
build The RHCS version string
host The RGW hostname to be set in the conf
port The RGW port number to be used in the conf
secure If the connection is secure or unsecure.
kms_keyid key to be used for encryption
"""
log.info("Creating the S3TestConfig file")
data = dict({"host": host, "port": int(port), "secure": secure})
rgw_node = cluster.get_nodes(role="rgw")[0]
client_node = cluster.get_nodes(role="client")[0]
if build.startswith("5"):
rgw_node = client_node
create_s3_user(node=rgw_node, user_prefix="main", data=data)
create_s3_user(node=rgw_node, user_prefix="alt", data=data)
create_s3_user(node=rgw_node, user_prefix="tenant", data=data)
if kms_keyid:
data["main"]["kms_keyid"] = kms_keyid
templ = Template(S3CONF)
_config = templ.render(data=data)
conf_file = client_node.remote_file(file_name="s3-tests/config.yaml",
file_mode="w")
conf_file.write(_config)
conf_file.flush()
def run(ceph_cluster: Ceph, **kwargs) -> int:
"""
Entry point to this module that executes the set of workflows.
Here, Cloud Object Store Benchmark tool (COSBench) is installed on the nodes in the
cluster having the following roles
- cosbench-controller
Args:
ceph_cluster: Cluster participating in the test.
Returns:
0 on Success and 1 on Failure.
"""
LOG.info("Being COSBench deploy and configuration workflow.")
client = ceph_cluster.get_nodes(role="client")[0]
controllers = get_nodes_by_ids(ceph_cluster,
kwargs["config"]["controllers"])
drivers = get_nodes_by_ids(ceph_cluster,
kwargs["config"]["drivers"]["hosts"])
try:
install(controllers)
for ctrl in controllers:
enable_ports(ctrl, port=19088)
install(drivers)
data = list()
driver_count = kwargs["config"]["drivers"].get("count", 1)
for driver in drivers:
for i in range(driver_count):
port = 18088 + 100 * i
enable_ports(driver, port)
data.append({
"name": driver.shortname,
"ip_address": driver.ip_address,
"port": port,
})
config(controllers[0], data=data)
execute_cosbench_script(drivers,
script=f"start-driver.sh {driver_count}")
execute_cosbench_script(controllers, script="start-controller.sh")
get_or_create_user(client)
except BaseException as be: # noqa
LOG.error(be)
return 1
LOG.info("Successfully deployed COSBench!!!")
return 0
def execute_setup(cluster: Ceph, config: dict) -> None:
"""
Execute the prerequisites required to run the tests.
It involves the following steps
- install the required software (radosgw for CLI execution)
- Clone the S3 tests repo in the client node
- Install S3 pre-requisites in the client node
- Open the firewall port on the RGW node
- Add 'rgw_lc_debug_interval' key to the RGW node config
- Restart the service
Args:
cluster: Ceph cluster participating in the test.
config: The key/value pairs passed by the tester.
Raises:
CommandFailed: When a remote command returned non-zero value.
"""
build = config.get("build", config.get("rhbuild"))
client_node = cluster.get_nodes(role="client")[0]
rgw_node = cluster.get_nodes(role="rgw")[0]
branch = config.get("branch", "ceph-luminous")
clone_s3_tests(node=client_node, branch=branch)
install_s3test_requirements(client_node, branch)
host = rgw_node.shortname
secure = config.get("is_secure", "no")
port = "443" if secure.lower() == "yes" else rgw_frontend_port(
cluster, build)
create_s3_conf(cluster, build, host, port, secure)
if not build.startswith("5"):
open_firewall_port(rgw_node, port=port, protocol="tcp")
add_lc_debug(cluster, build)
def _install_agent(cluster: Ceph, config: Dict) -> None:
"""
Installs and configures the vault-agent on all RGW nodes
Args:
cluster Ceph cluster participating in the test
config key/value pairs useful for customization
Returns:
None
Raises:
CommandFailed
"""
rgw_nodes = cluster.get_nodes(role="rgw")
for node in rgw_nodes:
LOG.debug(f"Vault install and configuration on {node.shortname}")
_install_vault_packages(node)
_create_agent_config(node, config)
_create_agent_systemd(node)
def _rgw_lc_debug(cluster: Ceph, add: bool = True) -> None:
"""
Modifies the Lifecycle interval parameter used for testing.
The configurable is enable if add is set else disabled. In case of CephAdm, the
value has to set for every daemon.
Args:
cluster The cluster participating in the test
add If set adds the configurable else unsets it.
Returns:
None
"""
node = cluster.get_nodes(role="client")[0]
out, err = node.exec_command(
sudo=True, cmd="ceph orch ps --daemon_type rgw --format json")
rgw_daemons = [
f"client.rgw.{x['daemon_id']}" for x in loads(out.read().decode())
]
out, err = node.exec_command(
sudo=True, cmd="ceph orch ls --service_type rgw --format json")
rgw_services = [x["service_name"] for x in loads(out.read().decode())]
# Set (or) Unset the lc_debug_interval for all daemons
for daemon in rgw_daemons:
if add:
command = f"ceph config set {daemon} rgw_lc_debug_interval 10"
else:
command = f"ceph config rm {daemon} rgw_lc_debug_interval"
node.exec_command(sudo=True, cmd=command)
for service in rgw_services:
node.exec_command(sudo=True, cmd=f"ceph orch restart {service}")
# Restart can take time
sleep(60)
def get_rgw_frontend(cluster: Ceph) -> Tuple:
"""
Returns the RGW frontend information.
The frontend information is found by
- getting the config dump (or)
- reading the config file
Args:
cluster The cluster participating in the test
Returns:
Tuple(str, bool, int)
lib beast or civetweb
secure True if secure else False
port the configured port
"""
frontend_value = None
try:
node = cluster.get_nodes(role="client")[0]
out, err = node.exec_command(sudo=True,
cmd="ceph config dump --format json")
configs = loads(out)
for config in configs:
if config.get("name").lower() != "rgw_frontends":
continue
frontend_value = config.get("value").split()
# the command would work but may not have the required values
if not frontend_value:
raise AttributeError(
"Config has no frontend information. Trying conf file")
except BaseException as e:
log.debug(e)
# Process via config
node = cluster.get_nodes(role="rgw")[0]
# rgw frontends = civetweb port=192.168.122.199:8080 num_threads=100
command = "grep -e '^rgw frontends' /etc/ceph/ceph.conf"
out, err = node.exec_command(sudo=True, cmd=command)
key, sep, value = out.partition("=")
frontend_value = value.lstrip().split()
if not frontend_value:
raise AttributeError("RGW frontend details not found in conf.")
lib = "beast" if "beast" in frontend_value else "civetweb"
secure = False
port = 80
# Double check the port number
for value in frontend_value:
# support values like endpoint=x.x.x.x:port ssl_port=443 port=x.x.x.x:8080
if "port" in value or "endpoint" in value:
sep = ":" if ":" in value else "="
port = value.split(sep)[-1]
continue
if not secure and "ssl" in value.lower():
secure = True
continue
return lib, secure, port
def run(ceph_cluster: Ceph, config: Dict, **kwargs) -> int:
"""CephCI framework entry point for the module.
This method tunes the network based on the given set of configurations for the
mentioned set of nodes.
Note: Exercise the test module before deploying RHCS.
Examples:
# Apply network delay for the given nodes
config:
nodes:
- node1
- node2
network-device: eth0
rule: root netem delay 100ms 50ms distribution normal
# Apply network delay for the given CephNode role
config:
roles:
- rgw
- client
network-device: eth0
rule: root netem loss 0.5%
modify: true
Args:
ceph_cluster (Ceph): Ceph Cluster participating in the test environment.
config (dict): Configuration that needs to be applied
kwargs (dict): Key-value pairs that can be leveraged.
Returns:
0 on success else 1 on failures
"""
LOG.info("Executing network shaping workflow.")
rc = 0
nodes = list()
if "roles" in config.keys():
for role in config["roles"]:
nodes += ceph_cluster.get_nodes(role=role)
if "nodes" in config.keys():
nodes += get_nodes_by_ids(ceph_cluster, config["nodes"])
for node in nodes:
dev = get_network_device(node)
if config.get("network-device", dev) != dev:
LOG.debug(f"The default network device is {dev}")
LOG.error(f"{config['network-device']} is not found in {node.vmshortname}")
rc = 1
continue
verb = "change" if config.get("modify", False) else "add"
rule = config["rule"]
try:
exec_command(
node=node,
check_ec=True,
sudo=True,
command=f"tc qdisc {verb} dev {dev} {rule}",
)
except Exception as be: # no-qa
LOG.debug(f"Failed to apply tc rule on {node.vmshortname}")
LOG.warning(be)
rc = 1
return rc
def create_s3_conf(cluster: Ceph, build: str, host: str, port: str,
secure: str) -> None:
"""
Generate the S3TestConf for test execution.
Args:
cluster: The cluster participating in the test
build: The RHCS version string
host: The RGW hostname to be set in the conf
port: The RGW port number to be used in the conf
secure: If the connection is secure or unsecure.
"""
log.info("Creating the S3TestConfig file")
rgw_node = cluster.get_nodes(role="rgw")[0]
client_node = cluster.get_nodes(role="client")[0]
if build.startswith("5"):
rgw_node = client_node
main_user = create_s3_user(node=rgw_node,
display_name="main-user",
email=True)
alt_user = create_s3_user(node=rgw_node,
display_name="alt-user",
email=True)
tenant_user = create_s3_user(node=rgw_node,
display_name="tenant",
email=True)
_config = """
[DEFAULT]
host = {host}
port = {port}
is_secure = {secure}
[fixtures]
bucket prefix = cephuser-{random}-
[s3 main]
user_id = {main_id}
display_name = {main_name}
access_key = {main_access_key}
secret_key = {main_secret_key}
email = {main_email}
api_name = default
[s3 alt]
user_id = {alt_id}
display_name = {alt_name}
email = {alt_email}
access_key = {alt_access_key}
secret_key = {alt_secret_key}
[s3 tenant]
user_id = {tenant_id}
display_name = {tenant_name}
email = {tenant_email}
access_key = {tenant_access_key}
secret_key = {tenant_secret_key}""".format(
host=host,
port=port,
secure=secure,
random="{random}",
main_id=main_user["user_id"],
main_name=main_user["display_name"],
main_access_key=main_user["keys"][0]["access_key"],
main_secret_key=main_user["keys"][0]["secret_key"],
main_email=main_user["email"],
alt_id=alt_user["user_id"],
alt_name=alt_user["display_name"],
alt_email=alt_user["email"],
alt_access_key=alt_user["keys"][0]["access_key"],
alt_secret_key=alt_user["keys"][0]["secret_key"],
tenant_id=tenant_user["user_id"],
tenant_name=tenant_user["display_name"],
tenant_email=tenant_user["email"],
tenant_access_key=tenant_user["keys"][0]["access_key"],
tenant_secret_key=tenant_user["keys"][0]["secret_key"],
)
conf_file = client_node.remote_file(file_name="s3-tests/config.yaml",
file_mode="w")
conf_file.write(_config)
conf_file.flush()
