def _get_dtmf_settings(self):
menu = RadioSettingGroup("dtmf_settings", "DTMF")
dtmf = self._memobj.scan_settings
val = RadioSettingValueList(
self._DTMF_MODE,
self._DTMF_MODE[dtmf.dtmf_mode])
rs = RadioSetting("scan_settings.dtmf_mode", "DTMF Mode", val)
menu.append(rs)
val = RadioSettingValueList(
self._DTMF_DELAY,
self._DTMF_DELAY[dtmf.dtmf_delay])
rs = RadioSetting(
"scan_settings.dtmf_delay", "DTMF Delay", val)
menu.append(rs)
val = RadioSettingValueList(
self._DTMF_SPEED,
self._DTMF_SPEED[dtmf.dtmf_speed])
rs = RadioSetting(
"scan_settings.dtmf_speed", "DTMF Speed", val)
menu.append(rs)
for i in range(10):
name = "dtmf_%02d" % (i + 1)
if i == 9:
name = "dtmf_%02d" % 0
dtmfsetting = self._memobj.dtmf[i]
dtmfstr = ""
for c in dtmfsetting.memory:
if c == 0xFF:
break
if c < len(FT70_DTMF_CHARS):
dtmfstr += FT70_DTMF_CHARS[c]
dtmfentry = RadioSettingValueString(0, 16, dtmfstr)
dtmfentry.set_charset(
FT70_DTMF_CHARS + list("abcdef ")) # Allow input in lowercase, space ? validation fails otherwise
rs = RadioSetting(name, name.upper(), dtmfentry)
rs.set_apply_callback(self.apply_dtmf, i)
menu.append(rs)
return menu
def get_settings(self):
_settings = self._memobj.settings
basic = RadioSettingGroup("basic", "Basic")
dtmf = RadioSettingGroup("dtmf", "DTMF")
arts = RadioSettingGroup("arts", "ARTS")
prog = RadioSettingGroup("prog", "Programmable Buttons")
top = RadioSettings(basic, dtmf, arts, prog)
basic.append(RadioSetting(
"priority_revert", "Priority Revert",
RadioSettingValueBoolean(_settings.priority_revert)))
basic.append(RadioSetting(
"memory_only", "Memory Only mode",
RadioSettingValueBoolean(_settings.memory_only)))
opts = ["off"] + ["%0.1f" % (t / 60.0) for t in range(30, 750, 30)]
basic.append(RadioSetting(
"apo", "APO time (hrs)",
RadioSettingValueList(opts, opts[_settings.apo])))
basic.append(RadioSetting(
"beep_scan", "Beep: Scan",
RadioSettingValueBoolean(_settings.beep_scan)))
basic.append(RadioSetting(
"beep_edge", "Beep: Edge",
RadioSettingValueBoolean(_settings.beep_edge)))
basic.append(RadioSetting(
"beep_key", "Beep: Key",
RadioSettingValueBoolean(_settings.beep_key)))
opts = ["T/RX Normal", "RX Reverse", "TX Reverse", "T/RX Reverse"]
basic.append(RadioSetting(
"dcs_polarity", "DCS polarity",
RadioSettingValueList(opts, opts[_settings.dcs_polarity])))
opts = ["off", "dim 1", "dim 2", "dim 3"]
basic.append(RadioSetting(
"dimmer", "Dimmer",
RadioSettingValueList(opts, opts[_settings.dimmer])))
opts = ["manual", "auto", "1-auto"]
basic.append(RadioSetting(
"hyper_write", "Hyper Write",
RadioSettingValueList(opts, opts[_settings.hyper_write])))
opts = ["", "key", "dial", "key+dial", "ptt",
"ptt+key", "ptt+dial", "all"]
basic.append(RadioSetting(
"lock", "Lock mode",
RadioSettingValueList(opts, opts[_settings.lock])))
opts = ["MH-42", "MH-48"]
basic.append(RadioSetting(
"microphone_type", "Microphone Type",
RadioSettingValueList(opts, opts[_settings.microphone_type])))
opts = ["off"] + ["S-%d" % n for n in range(2, 10)] + ["S-Full"]
basic.append(RadioSetting(
"rf_sql", "RF Squelch",
RadioSettingValueList(opts, opts[_settings.rf_sql])))
opts = ["time", "hold", "busy"]
basic.append(RadioSetting(
"scan_resume", "Scan Resume",
RadioSettingValueList(opts, opts[_settings.scan_resume])))
opts = ["single", "continuous"]
basic.append(RadioSetting(
"smart_search", "Smart Search",
RadioSettingValueList(opts, opts[_settings.smart_search])))
opts = ["off"] + ["%d" % t for t in range(1, 31)]
basic.append(RadioSetting(
"tot", "Time-out timer (mins)",
RadioSettingValueList(opts, opts[_settings.tot])))
# dtmf tab
opts = ["50", "100", "250", "450", "750", "1000"]
dtmf.append(RadioSetting(
"dtmf_delay", "DTMF delay (ms)",
RadioSettingValueList(opts, opts[_settings.dtmf_delay])))
opts = ["50", "75", "100"]
dtmf.append(RadioSetting(
"dtmf_speed", "DTMF speed (ms)",
RadioSettingValueList(opts, opts[_settings.dtmf_speed])))
for i in range(16):
name = "dtmf%02d" % i
dtmfsetting = self._memobj.dtmf[i]
dtmfstr = ""
for c in dtmfsetting.memory:
if c == 0xFF:
break
if c < len(DTMFCHARSET):
dtmfstr += DTMFCHARSET[c]
LOG.debug(dtmfstr)
dtmfentry = RadioSettingValueString(0, 16, dtmfstr)
dtmfentry.set_charset(DTMFCHARSET + list(" "))
rs = RadioSetting(name, name.upper(), dtmfentry)
dtmf.append(rs)
# arts tab
opts = ["off", "in range", "always"]
arts.append(RadioSetting(
"arts_mode", "ARTS beep",
RadioSettingValueList(opts, opts[_settings.arts_mode])))
opts = ["15", "25"]
arts.append(RadioSetting(
"arts_interval", "ARTS interval",
RadioSettingValueList(opts, opts[_settings.arts_interval])))
arts.append(RadioSetting(
"arts_cwid_enable", "CW ID",
RadioSettingValueBoolean(_settings.arts_cwid_enable)))
_arts_cwid = self._memobj.arts_cwid
cwid = RadioSettingValueString(
0, 16, self._decode_chars(_arts_cwid.get_value()))
cwid.set_charset(CHARSET)
arts.append(RadioSetting("arts_cwid", "CW ID", cwid))
# prog buttons
opts = ["WX", "Reverse", "Repeater", "SQL Off", "Lock", "Dimmer"]
prog.append(RadioSetting(
"prog_panel_acc", "Prog Panel - Low(ACC)",
RadioSettingValueList(opts, opts[_settings.prog_panel_acc])))
opts = ["Reverse", "Home"]
prog.append(RadioSetting(
"prog_tone_vm", "TONE | V/M",
RadioSettingValueList(opts, opts[_settings.prog_tone_vm])))
opts = ["" for n in range(26)] + \
["Priority", "Low", "Tone", "MHz", "Reverse", "Home", "Band",
"VFO/MR", "Scan", "Sql Off", "TCall", "SSCH", "ARTS", "Tone Freq",
"DCSC", "WX", "Repeater"]
prog.append(RadioSetting(
"prog_p1", "P1",
RadioSettingValueList(opts, opts[_settings.prog_p1])))
prog.append(RadioSetting(
"prog_p2", "P2",
RadioSettingValueList(opts, opts[_settings.prog_p2])))
prog.append(RadioSetting(
"prog_p3", "P3",
RadioSettingValueList(opts, opts[_settings.prog_p3])))
prog.append(RadioSetting(
"prog_p4", "P4",
RadioSettingValueList(opts, opts[_settings.prog_p4])))
return top
def get_settings(self):
_settings = self._memobj.settings
basic = RadioSettingGroup("basic", "Basic")
cw = RadioSettingGroup("cw", "CW")
packet = RadioSettingGroup("packet", "Digital & packet")
panel = RadioSettingGroup("panel", "Panel settings")
extended = RadioSettingGroup("extended", "Extended")
antenna = RadioSettingGroup("antenna", "Antenna selection")
panelcontr = RadioSettingGroup("panelcontr", "Panel controls")
top = RadioSettingGroup("top", "All Settings", basic, cw, packet,
panelcontr, panel, extended, antenna)
rs = RadioSetting("ars_144", "144 ARS",
RadioSettingValueBoolean(_settings.ars_144))
basic.append(rs)
rs = RadioSetting("ars_430", "430 ARS",
RadioSettingValueBoolean(_settings.ars_430))
basic.append(rs)
rs = RadioSetting("pkt9600_mic", "Paket 9600 mic level",
RadioSettingValueInteger(0, 100, _settings.pkt9600_mic))
packet.append(rs)
options = ["enable", "disable"]
rs = RadioSetting("disable_amfm_dial", "AM&FM Dial",
RadioSettingValueList(options,
options[_settings.disable_amfm_dial]))
panel.append(rs)
rs = RadioSetting("am_mic", "AM mic level",
RadioSettingValueInteger(0, 100, _settings.am_mic))
basic.append(rs)
options = ["OFF", "1h", "2h", "3h", "4h", "5h", "6h"]
rs = RadioSetting("apo_time", "APO time",
RadioSettingValueList(options,
options[_settings.apo_time]))
basic.append(rs)
options = ["OFF", "Range", "All"]
rs = RadioSetting("arts_beep", "ARTS beep",
RadioSettingValueList(options,
options[_settings.arts_beep]))
basic.append(rs)
options = ["OFF", "ON", "Auto"]
rs = RadioSetting("backlight", "Backlight",
RadioSettingValueList(options,
options[_settings.backlight]))
panel.append(rs)
options = ["6h", "8h", "10h"]
rs = RadioSetting("batt_chg", "Battery charge",
RadioSettingValueList(options,
options[_settings.batt_chg]))
basic.append(rs)
options = ["440Hz", "880Hz"]
rs = RadioSetting("beep_freq", "Beep frequency",
RadioSettingValueList(options,
options[_settings.beep_freq]))
panel.append(rs)
rs = RadioSetting("beep_volume", "Beep volume",
RadioSettingValueInteger(0, 100, _settings.beep_volume))
panel.append(rs)
options = ["4800", "9600", "38400"]
rs = RadioSetting("cat_rate", "CAT rate",
RadioSettingValueList(options,
options[_settings.cat_rate]))
basic.append(rs)
options = ["Blue", "Amber", "Violet"]
rs = RadioSetting("color", "Color",
RadioSettingValueList(options,
options[_settings.color]))
panel.append(rs)
rs = RadioSetting("contrast", "Contrast",
RadioSettingValueInteger(1, 12,_settings.contrast-1))
panel.append(rs)
rs = RadioSetting("cw_delay", "CW delay (*10 ms)",
RadioSettingValueInteger(1, 250, _settings.cw_delay))
cw.append(rs)
rs = RadioSetting("cw_id", "CW id",
RadioSettingValueBoolean(_settings.cw_id))
cw.append(rs)
options = ["Normal", "Reverse"]
rs = RadioSetting("cw_paddle", "CW paddle",
RadioSettingValueList(options,
options[_settings.cw_paddle]))
cw.append(rs)
options = ["%i Hz" % i for i in range(300,1001,50)]
rs = RadioSetting("cw_pitch", "CW pitch",
RadioSettingValueList(options,
options[_settings.cw_pitch]))
cw.append(rs)
options = ["%i wpm" % i for i in range(4,61)]
rs = RadioSetting("cw_speed", "CW speed",
RadioSettingValueList(options,
options[_settings.cw_speed]))
cw.append(rs)
options = ["1:%1.1f" % (i/10) for i in range(25,46,1)]
rs = RadioSetting("cw_weight", "CW weight",
RadioSettingValueList(options,
options[_settings.cw_weight]))
cw.append(rs)
rs = RadioSetting("dig_disp", "Dig disp (*10 Hz)",
RadioSettingValueInteger(-300, 300, _settings.dig_disp))
packet.append(rs)
rs = RadioSetting("dig_mic", "Dig mic",
RadioSettingValueInteger(0, 100, _settings.dig_mic))
packet.append(rs)
options = ["RTTY", "PSK31-L", "PSK31-U", "USER-L", "USER-U"]
rs = RadioSetting("dig_mode", "Dig mode",
RadioSettingValueList(options,
options[_settings.dig_mode]))
packet.append(rs)
rs = RadioSetting("dig_shift", "Dig shift (*10 Hz)",
RadioSettingValueInteger(-300, 300, _settings.dig_shift))
packet.append(rs)
rs = RadioSetting("fm_mic", "FM mic",
RadioSettingValueInteger(0, 100, _settings.fm_mic))
basic.append(rs)
options = ["Dial", "Freq", "Panel"]
rs = RadioSetting("lock_mode", "Lock mode",
RadioSettingValueList(options,
options[_settings.lock_mode]))
panel.append(rs)
options = ["Fine", "Coarse"]
rs = RadioSetting("main_step", "Main step",
RadioSettingValueList(options,
options[_settings.main_step]))
panel.append(rs)
rs = RadioSetting("mem_group", "Mem group",
RadioSettingValueBoolean(_settings.mem_group))
basic.append(rs)
rs = RadioSetting("mic_key", "Mic key",
RadioSettingValueBoolean(_settings.mic_key))
cw.append(rs)
rs = RadioSetting("mic_scan", "Mic scan",
RadioSettingValueBoolean(_settings.mic_scan))
basic.append(rs)
options = ["Off", "SSB", "CW"]
rs = RadioSetting("op_filter", "Optional filter",
RadioSettingValueList(options,
options[_settings.op_filter]))
basic.append(rs)
rs = RadioSetting("pkt_mic", "Packet mic",
RadioSettingValueInteger(0, 100, _settings.pkt_mic))
packet.append(rs)
options = ["1200", "9600"]
rs = RadioSetting("pkt_rate", "Packet rate",
RadioSettingValueList(options,
options[_settings.pkt_rate]))
packet.append(rs)
options = ["Off", "3 sec", "5 sec", "10 sec"]
rs = RadioSetting("resume_scan", "Resume scan",
RadioSettingValueList(options,
options[_settings.resume_scan]))
basic.append(rs)
options = ["Cont", "Chk"]
rs = RadioSetting("scope", "Scope",
RadioSettingValueList(options,
options[_settings.scope]))
basic.append(rs)
rs = RadioSetting("sidetone", "Sidetone",
RadioSettingValueInteger(0, 100, _settings.sidetone))
cw.append(rs)
options = ["RF-Gain", "Squelch"]
rs = RadioSetting("sql_rf_gain", "Squelch/RF-Gain",
RadioSettingValueList(options,
options[_settings.sql_rf_gain]))
panel.append(rs)
rs = RadioSetting("ssb_mic", "SSB Mic",
RadioSettingValueInteger(0, 100, _settings.ssb_mic))
basic.append(rs)
options = ["%i" % i for i in range(0, 21)]
options[0] = "Off"
rs = RadioSetting("tot_time", "Time-out timer",
RadioSettingValueList(options,
options[_settings.tot_time]))
basic.append(rs)
rs = RadioSetting("vox_delay", "VOX delay (*100 ms)",
RadioSettingValueInteger(1, 25, _settings.vox_delay))
basic.append(rs)
rs = RadioSetting("vox_gain", "VOX Gain",
RadioSettingValueInteger(0, 100, _settings.vox_gain))
basic.append(rs)
rs = RadioSetting("extended_menu", "Extended menu",
RadioSettingValueBoolean(_settings.extended_menu))
extended.append(rs)
options = ["Tn-Rn", "Tn-Riv", "Tiv-Rn", "Tiv-Riv"]
rs = RadioSetting("dcs_inv", "DCS coding",
RadioSettingValueList(options,
options[_settings.dcs_inv]))
extended.append(rs)
rs = RadioSetting("r_lsb_car", "LSB Rx carrier point (*10 Hz)",
RadioSettingValueInteger(-30, 30, _settings.r_lsb_car))
extended.append(rs)
rs = RadioSetting("r_usb_car", "USB Rx carrier point (*10 Hz)",
RadioSettingValueInteger(-30, 30, _settings.r_usb_car))
extended.append(rs)
rs = RadioSetting("t_lsb_car", "LSB Tx carrier point (*10 Hz)",
RadioSettingValueInteger(-30, 30, _settings.t_lsb_car))
extended.append(rs)
rs = RadioSetting("t_usb_car", "USB Tx carrier point (*10 Hz)",
RadioSettingValueInteger(-30, 30, _settings.t_usb_car))
extended.append(rs)
options = ["Hi", "L3", "L2", "L1"]
rs = RadioSetting("tx_power", "TX power",
RadioSettingValueList(options,
options[_settings.tx_power]))
basic.append(rs)
options = ["Front", "Rear"]
rs = RadioSetting("hf_antenna", "HF",
RadioSettingValueList(options,
options[_settings.hf_antenna]))
antenna.append(rs)
rs = RadioSetting("sixm_antenna", "6M",
RadioSettingValueList(options,
options[_settings.sixm_antenna]))
antenna.append(rs)
rs = RadioSetting("bc_antenna", "Broadcasting",
RadioSettingValueList(options,
options[_settings.bc_antenna]))
antenna.append(rs)
rs = RadioSetting("air_antenna", "Air band",
RadioSettingValueList(options,
options[_settings.air_antenna]))
antenna.append(rs)
rs = RadioSetting("vhf_antenna", "VHF",
RadioSettingValueList(options,
options[_settings.vhf_antenna]))
antenna.append(rs)
rs = RadioSetting("uhf_antenna", "UHF",
RadioSettingValueList(options,
options[_settings.uhf_antenna]))
antenna.append(rs)
s = RadioSettingValueString(0, 7,
''.join([self._CALLSIGN_CHARSET[x] for x in
self._memobj.callsign]))
s.set_charset(self._CALLSIGN_CHARSET)
rs = RadioSetting("callsign", "Callsign", s)
cw.append(rs)
rs = RadioSetting("spl", "Split",
RadioSettingValueBoolean(_settings.spl))
panelcontr.append(rs)
options = ["None", "Up", "Down"]
rs = RadioSetting("scn_mode", "Scan mode",
RadioSettingValueList(options,
options[_settings.scn_mode]))
panelcontr.append(rs)
rs = RadioSetting("pri", "Priority",
RadioSettingValueBoolean(_settings.pri))
panelcontr.append(rs)
rs = RadioSetting("dw", "Dual watch",
RadioSettingValueBoolean(_settings.dw))
panelcontr.append(rs)
rs = RadioSetting("art", "Auto-range transponder",
RadioSettingValueBoolean(_settings.art))
panelcontr.append(rs)
rs = RadioSetting("nb", "Noise blanker",
RadioSettingValueBoolean(_settings.nb))
panelcontr.append(rs)
options = ["Auto", "Fast", "Slow", "Off"]
rs = RadioSetting("agc", "AGC",
RadioSettingValueList(options,
options[_settings.agc]))
panelcontr.append(rs)
options = ["PWR", "ALC", "SWR", "MOD"]
rs = RadioSetting("pwr_meter_mode", "Power meter mode",
RadioSettingValueList(options,
options[_settings.pwr_meter_mode]))
panelcontr.append(rs)
rs = RadioSetting("vox", "Vox",
RadioSettingValueBoolean(_settings.vox))
panelcontr.append(rs)
rs = RadioSetting("bk", "Semi break-in",
RadioSettingValueBoolean(_settings.bk))
cw.append(rs)
rs = RadioSetting("kyr", "Keyer",
RadioSettingValueBoolean(_settings.kyr))
cw.append(rs)
options = ["enabled", "disabled"]
rs = RadioSetting("fst", "Fast",
RadioSettingValueList(options,
options[_settings.fst]))
panelcontr.append(rs)
options = ["enabled", "disabled"]
rs = RadioSetting("lock", "Lock",
RadioSettingValueList(options,
options[_settings.lock]))
panelcontr.append(rs)
return top
def get_settings(self):
_settings = self._memobj.settings
basic = RadioSettingGroup("basic", "Basic")
cw = RadioSettingGroup("cw", "CW")
packet = RadioSettingGroup("packet", "Digital & packet")
panel = RadioSettingGroup("panel", "Panel settings")
extended = RadioSettingGroup("extended", "Extended")
antenna = RadioSettingGroup("antenna", "Antenna selection")
panelcontr = RadioSettingGroup("panelcontr", "Panel controls")
top = RadioSettings(basic, cw, packet,
panelcontr, panel, extended, antenna)
rs = RadioSetting("ars_144", "144 ARS",
RadioSettingValueBoolean(_settings.ars_144))
basic.append(rs)
rs = RadioSetting("ars_430", "430 ARS",
RadioSettingValueBoolean(_settings.ars_430))
basic.append(rs)
rs = RadioSetting("pkt9600_mic", "Paket 9600 mic level",
RadioSettingValueInteger(0, 100,
_settings.pkt9600_mic))
packet.append(rs)
options = ["enable", "disable"]
rs = RadioSetting("disable_amfm_dial", "AM&FM Dial",
RadioSettingValueList(options,
options[
_settings.disable_amfm_dial
]))
panel.append(rs)
rs = RadioSetting("am_mic", "AM mic level",
RadioSettingValueInteger(0, 100, _settings.am_mic))
basic.append(rs)
options = ["OFF", "1h", "2h", "3h", "4h", "5h", "6h"]
rs = RadioSetting("apo_time", "APO time",
RadioSettingValueList(options,
options[_settings.apo_time]))
basic.append(rs)
options = ["OFF", "Range", "All"]
rs = RadioSetting("arts_beep", "ARTS beep",
RadioSettingValueList(options,
options[_settings.arts_beep]))
basic.append(rs)
options = ["OFF", "ON", "Auto"]
rs = RadioSetting("backlight", "Backlight",
RadioSettingValueList(options,
options[_settings.backlight]))
panel.append(rs)
options = ["6h", "8h", "10h"]
rs = RadioSetting("batt_chg", "Battery charge",
RadioSettingValueList(options,
options[_settings.batt_chg]))
basic.append(rs)
options = ["440Hz", "880Hz"]
rs = RadioSetting("beep_freq", "Beep frequency",
RadioSettingValueList(options,
options[_settings.beep_freq]))
panel.append(rs)
rs = RadioSetting("beep_volume", "Beep volume",
RadioSettingValueInteger(0, 100,
_settings.beep_volume))
panel.append(rs)
options = ["4800", "9600", "38400"]
rs = RadioSetting("cat_rate", "CAT rate",
RadioSettingValueList(options,
options[_settings.cat_rate]))
basic.append(rs)
options = ["Blue", "Amber", "Violet"]
rs = RadioSetting("color", "Color",
RadioSettingValueList(options,
options[_settings.color]))
panel.append(rs)
rs = RadioSetting("contrast", "Contrast",
RadioSettingValueInteger(1, 12,
_settings.contrast - 1))
panel.append(rs)
rs = RadioSetting("cw_delay", "CW delay (*10 ms)",
RadioSettingValueInteger(1, 250,
_settings.cw_delay))
cw.append(rs)
rs = RadioSetting("cw_id", "CW id",
RadioSettingValueBoolean(_settings.cw_id))
cw.append(rs)
options = ["Normal", "Reverse"]
rs = RadioSetting("cw_paddle", "CW paddle",
RadioSettingValueList(options,
options[_settings.cw_paddle]))
cw.append(rs)
options = ["%i Hz" % i for i in range(300, 1001, 50)]
rs = RadioSetting("cw_pitch", "CW pitch",
RadioSettingValueList(options,
options[_settings.cw_pitch]))
cw.append(rs)
options = ["%i wpm" % i for i in range(4, 61)]
rs = RadioSetting("cw_speed", "CW speed",
RadioSettingValueList(options,
options[_settings.cw_speed]))
cw.append(rs)
options = ["1:%1.1f" % (i / 10) for i in range(25, 46, 1)]
rs = RadioSetting("cw_weight", "CW weight",
RadioSettingValueList(options,
options[_settings.cw_weight]))
cw.append(rs)
rs = RadioSetting("dig_disp", "Dig disp (*10 Hz)",
RadioSettingValueInteger(-300, 300,
_settings.dig_disp))
packet.append(rs)
rs = RadioSetting("dig_mic", "Dig mic",
RadioSettingValueInteger(0, 100,
_settings.dig_mic))
packet.append(rs)
options = ["RTTY", "PSK31-L", "PSK31-U", "USER-L", "USER-U"]
rs = RadioSetting("dig_mode", "Dig mode",
RadioSettingValueList(options,
options[_settings.dig_mode]))
packet.append(rs)
rs = RadioSetting("dig_shift", "Dig shift (*10 Hz)",
RadioSettingValueInteger(-300, 300,
_settings.dig_shift))
packet.append(rs)
rs = RadioSetting("fm_mic", "FM mic",
RadioSettingValueInteger(0, 100,
_settings.fm_mic))
basic.append(rs)
options = ["Dial", "Freq", "Panel"]
rs = RadioSetting("lock_mode", "Lock mode",
RadioSettingValueList(options,
options[_settings.lock_mode]))
panel.append(rs)
options = ["Fine", "Coarse"]
rs = RadioSetting("main_step", "Main step",
RadioSettingValueList(options,
options[_settings.main_step]))
panel.append(rs)
rs = RadioSetting("mem_group", "Mem group",
RadioSettingValueBoolean(_settings.mem_group))
basic.append(rs)
rs = RadioSetting("mic_key", "Mic key",
RadioSettingValueBoolean(_settings.mic_key))
cw.append(rs)
rs = RadioSetting("mic_scan", "Mic scan",
RadioSettingValueBoolean(_settings.mic_scan))
basic.append(rs)
options = ["Off", "SSB", "CW"]
rs = RadioSetting("op_filter", "Optional filter",
RadioSettingValueList(options,
options[_settings.op_filter]))
basic.append(rs)
rs = RadioSetting("pkt_mic", "Packet mic",
RadioSettingValueInteger(0, 100, _settings.pkt_mic))
packet.append(rs)
options = ["1200", "9600"]
rs = RadioSetting("pkt_rate", "Packet rate",
RadioSettingValueList(options,
options[_settings.pkt_rate]))
packet.append(rs)
options = ["Off", "3 sec", "5 sec", "10 sec"]
rs = RadioSetting("resume_scan", "Resume scan",
RadioSettingValueList(options,
options[_settings.resume_scan])
)
basic.append(rs)
options = ["Cont", "Chk"]
rs = RadioSetting("scope", "Scope",
RadioSettingValueList(options,
options[_settings.scope]))
basic.append(rs)
rs = RadioSetting("sidetone", "Sidetone",
RadioSettingValueInteger(0, 100, _settings.sidetone))
cw.append(rs)
options = ["RF-Gain", "Squelch"]
rs = RadioSetting("sql_rf_gain", "Squelch/RF-Gain",
RadioSettingValueList(options,
options[_settings.sql_rf_gain])
)
panel.append(rs)
rs = RadioSetting("ssb_mic", "SSB Mic",
RadioSettingValueInteger(0, 100, _settings.ssb_mic))
basic.append(rs)
options = ["%i" % i for i in range(0, 21)]
options[0] = "Off"
rs = RadioSetting("tot_time", "Time-out timer",
RadioSettingValueList(options,
options[_settings.tot_time]))
basic.append(rs)
rs = RadioSetting("vox_delay", "VOX delay (*100 ms)",
RadioSettingValueInteger(1, 25, _settings.vox_delay))
basic.append(rs)
rs = RadioSetting("vox_gain", "VOX Gain",
RadioSettingValueInteger(0, 100, _settings.vox_gain))
basic.append(rs)
rs = RadioSetting("extended_menu", "Extended menu",
RadioSettingValueBoolean(_settings.extended_menu))
extended.append(rs)
options = ["Tn-Rn", "Tn-Riv", "Tiv-Rn", "Tiv-Riv"]
rs = RadioSetting("dcs_inv", "DCS coding",
RadioSettingValueList(options,
options[_settings.dcs_inv]))
extended.append(rs)
rs = RadioSetting("r_lsb_car", "LSB Rx carrier point (*10 Hz)",
RadioSettingValueInteger(-30, 30,
_settings.r_lsb_car))
extended.append(rs)
rs = RadioSetting("r_usb_car", "USB Rx carrier point (*10 Hz)",
RadioSettingValueInteger(-30, 30,
_settings.r_usb_car))
extended.append(rs)
rs = RadioSetting("t_lsb_car", "LSB Tx carrier point (*10 Hz)",
RadioSettingValueInteger(-30, 30,
_settings.t_lsb_car))
extended.append(rs)
rs = RadioSetting("t_usb_car", "USB Tx carrier point (*10 Hz)",
RadioSettingValueInteger(-30, 30,
_settings.t_usb_car))
extended.append(rs)
options = ["Hi", "L3", "L2", "L1"]
rs = RadioSetting("tx_power", "TX power",
RadioSettingValueList(options,
options[_settings.tx_power]))
basic.append(rs)
options = ["Front", "Rear"]
rs = RadioSetting("hf_antenna", "HF",
RadioSettingValueList(options,
options[_settings.hf_antenna]))
antenna.append(rs)
rs = RadioSetting("sixm_antenna", "6M",
RadioSettingValueList(options,
options[_settings.sixm_antenna]
))
antenna.append(rs)
rs = RadioSetting("bc_antenna", "Broadcasting",
RadioSettingValueList(options,
options[_settings.bc_antenna]))
antenna.append(rs)
rs = RadioSetting("air_antenna", "Air band",
RadioSettingValueList(options,
options[_settings.air_antenna])
)
antenna.append(rs)
rs = RadioSetting("vhf_antenna", "VHF",
RadioSettingValueList(options,
options[_settings.vhf_antenna])
)
antenna.append(rs)
rs = RadioSetting("uhf_antenna", "UHF",
RadioSettingValueList(options,
options[_settings.uhf_antenna])
)
antenna.append(rs)
st = RadioSettingValueString(0, 7, ''.join([self._CALLSIGN_CHARSET[x]
for x in self._memobj.callsign]))
st.set_charset(self._CALLSIGN_CHARSET)
rs = RadioSetting("callsign", "Callsign", st)
cw.append(rs)
rs = RadioSetting("spl", "Split",
RadioSettingValueBoolean(_settings.spl))
panelcontr.append(rs)
options = ["None", "Up", "Down"]
rs = RadioSetting("scn_mode", "Scan mode",
RadioSettingValueList(options,
options[_settings.scn_mode]))
panelcontr.append(rs)
rs = RadioSetting("pri", "Priority",
RadioSettingValueBoolean(_settings.pri))
panelcontr.append(rs)
rs = RadioSetting("dw", "Dual watch",
RadioSettingValueBoolean(_settings.dw))
panelcontr.append(rs)
rs = RadioSetting("art", "Auto-range transponder",
RadioSettingValueBoolean(_settings.art))
panelcontr.append(rs)
rs = RadioSetting("nb", "Noise blanker",
RadioSettingValueBoolean(_settings.nb))
panelcontr.append(rs)
options = ["Auto", "Fast", "Slow", "Off"]
rs = RadioSetting("agc", "AGC",
RadioSettingValueList(options, options[_settings.agc]
))
panelcontr.append(rs)
options = ["PWR", "ALC", "SWR", "MOD"]
rs = RadioSetting("pwr_meter_mode", "Power meter mode",
RadioSettingValueList(options,
options[
_settings.pwr_meter_mode
]))
panelcontr.append(rs)
rs = RadioSetting("vox", "Vox",
RadioSettingValueBoolean(_settings.vox))
panelcontr.append(rs)
rs = RadioSetting("bk", "Semi break-in",
RadioSettingValueBoolean(_settings.bk))
cw.append(rs)
rs = RadioSetting("kyr", "Keyer",
RadioSettingValueBoolean(_settings.kyr))
cw.append(rs)
options = ["enabled", "disabled"]
rs = RadioSetting("fst", "Fast",
RadioSettingValueList(options, options[_settings.fst]
))
panelcontr.append(rs)
options = ["enabled", "disabled"]
rs = RadioSetting("lock", "Lock",
RadioSettingValueList(options,
options[_settings.lock]))
panelcontr.append(rs)
return top
def get_settings(self):
"""Translate the bit in the mem_struct into settings in the UI"""
_mem = self._memobj
basic = RadioSettingGroup("basic", "Basic Settings")
advanced = RadioSettingGroup("advanced", "Advanced Settings")
other = RadioSettingGroup("other", "Other Settings")
work = RadioSettingGroup("work", "Work Mode Settings")
fm_preset = RadioSettingGroup("fm_preset", "FM Preset")
dtmfe = RadioSettingGroup("dtmfe", "DTMF Encode Settings")
service = RadioSettingGroup("service", "Service Settings")
top = RadioSettings(basic, advanced, other, work, fm_preset, dtmfe,
service)
# Basic settings
if _mem.settings.squelch > 0x09:
val = 0x00
else:
val = _mem.settings.squelch
rs = RadioSetting(
"settings.squelch", "Squelch",
RadioSettingValueList(LIST_OFF1TO9, LIST_OFF1TO9[val]))
basic.append(rs)
if _mem.settings.save > 0x04:
val = 0x00
else:
val = _mem.settings.save
rs = RadioSetting("settings.save", "Battery Saver",
RadioSettingValueList(LIST_SAVE, LIST_SAVE[val]))
basic.append(rs)
if _mem.settings.vox > 0x0A:
val = 0x00
else:
val = _mem.settings.vox
rs = RadioSetting(
"settings.vox", "Vox",
RadioSettingValueList(LIST_OFF1TO10, LIST_OFF1TO10[val]))
basic.append(rs)
if _mem.settings.abr > 0x0A:
val = 0x00
else:
val = _mem.settings.abr
rs = RadioSetting(
"settings.abr", "Backlight Timeout",
RadioSettingValueList(LIST_OFF1TO10, LIST_OFF1TO10[val]))
basic.append(rs)
rs = RadioSetting("settings.tdr", "Dual Watch",
RadioSettingValueBoolean(_mem.settings.tdr))
basic.append(rs)
rs = RadioSetting("settings.beep", "Beep",
RadioSettingValueBoolean(_mem.settings.beep))
basic.append(rs)
if _mem.settings.timeout > 0x27:
val = 0x03
else:
val = _mem.settings.timeout
rs = RadioSetting(
"settings.timeout", "Timeout Timer",
RadioSettingValueList(LIST_TIMEOUT, LIST_TIMEOUT[val]))
basic.append(rs)
if _mem.settings.voice > 0x02:
val = 0x01
else:
val = _mem.settings.voice
rs = RadioSetting("settings.voice", "Voice Prompt",
RadioSettingValueList(LIST_VOICE, LIST_VOICE[val]))
basic.append(rs)
rs = RadioSetting(
"settings.dtmfst", "DTMF Sidetone",
RadioSettingValueList(LIST_DTMFST,
LIST_DTMFST[_mem.settings.dtmfst]))
basic.append(rs)
if _mem.settings.screv > 0x02:
val = 0x01
else:
val = _mem.settings.screv
rs = RadioSetting("settings.screv", "Scan Resume",
RadioSettingValueList(LIST_RESUME, LIST_RESUME[val]))
basic.append(rs)
rs = RadioSetting(
"settings.pttid", "When to send PTT ID",
RadioSettingValueList(LIST_PTTID, LIST_PTTID[_mem.settings.pttid]))
basic.append(rs)
if _mem.settings.pttlt > 0x1E:
val = 0x05
else:
val = _mem.settings.pttlt
rs = RadioSetting("pttlt", "PTT ID Delay",
RadioSettingValueInteger(0, 50, val))
basic.append(rs)
rs = RadioSetting(
"settings.mdfa", "Display Mode (A)",
RadioSettingValueList(LIST_MODE, LIST_MODE[_mem.settings.mdfa]))
basic.append(rs)
rs = RadioSetting(
"settings.mdfb", "Display Mode (B)",
RadioSettingValueList(LIST_MODE, LIST_MODE[_mem.settings.mdfb]))
basic.append(rs)
rs = RadioSetting("settings.sync", "Sync A & B",
RadioSettingValueBoolean(_mem.settings.sync))
basic.append(rs)
rs = RadioSetting(
"settings.wtled", "Standby LED Color",
RadioSettingValueList(LIST_COLOR, LIST_COLOR[_mem.settings.wtled]))
basic.append(rs)
rs = RadioSetting(
"settings.rxled", "RX LED Color",
RadioSettingValueList(LIST_COLOR, LIST_COLOR[_mem.settings.rxled]))
basic.append(rs)
rs = RadioSetting(
"settings.txled", "TX LED Color",
RadioSettingValueList(LIST_COLOR, LIST_COLOR[_mem.settings.txled]))
basic.append(rs)
val = _mem.settings.almod
rs = RadioSetting("settings.almod", "Alarm Mode",
RadioSettingValueList(LIST_ALMOD, LIST_ALMOD[val]))
basic.append(rs)
rs = RadioSetting("settings.dbptt", "Double PTT",
RadioSettingValueBoolean(_mem.settings.dbptt))
basic.append(rs)
rs = RadioSetting("settings.ste", "Squelch Tail Eliminate (HT to HT)",
RadioSettingValueBoolean(_mem.settings.ste))
basic.append(rs)
rs = RadioSetting(
"settings.ponmsg", "Power-On Message",
RadioSettingValueList(LIST_PONMSG,
LIST_PONMSG[_mem.settings.ponmsg]))
basic.append(rs)
rs = RadioSetting("settings.roger", "Roger Beep",
RadioSettingValueBoolean(_mem.settings.roger))
basic.append(rs)
rs = RadioSetting(
"settings.rtone", "Tone Burst Frequency",
RadioSettingValueList(LIST_RTONE, LIST_RTONE[_mem.settings.rtone]))
basic.append(rs)
rs = RadioSetting(
"settings.rogerrx", "Roger Beep (RX)",
RadioSettingValueList(LIST_OFFAB,
LIST_OFFAB[_mem.settings.rogerrx]))
basic.append(rs)
# Advanced settings
rs = RadioSetting("settings.reset", "RESET Menu",
RadioSettingValueBoolean(_mem.settings.reset))
advanced.append(rs)
rs = RadioSetting("settings.menu", "All Menus",
RadioSettingValueBoolean(_mem.settings.menu))
advanced.append(rs)
rs = RadioSetting("settings.fmradio", "Broadcast FM Radio",
RadioSettingValueBoolean(_mem.settings.fmradio))
advanced.append(rs)
rs = RadioSetting("settings.alarm", "Alarm Sound",
RadioSettingValueBoolean(_mem.settings.alarm))
advanced.append(rs)
# Other settings
def _filter(name):
filtered = ""
for char in str(name):
if char in chirp_common.CHARSET_ASCII:
filtered += char
else:
filtered += " "
return filtered
_msg = _mem.firmware_msg
val = RadioSettingValueString(0, 7, _filter(_msg.line1))
val.set_mutable(False)
rs = RadioSetting("firmware_msg.line1", "Firmware Message 1", val)
other.append(rs)
val = RadioSettingValueString(0, 7, _filter(_msg.line2))
val.set_mutable(False)
rs = RadioSetting("firmware_msg.line2", "Firmware Message 2", val)
other.append(rs)
_msg = _mem.sixpoweron_msg
val = RadioSettingValueString(0, 7, _filter(_msg.line1))
val.set_mutable(False)
rs = RadioSetting("sixpoweron_msg.line1", "6+Power-On Message 1", val)
other.append(rs)
val = RadioSettingValueString(0, 7, _filter(_msg.line2))
val.set_mutable(False)
rs = RadioSetting("sixpoweron_msg.line2", "6+Power-On Message 2", val)
other.append(rs)
_msg = _mem.poweron_msg
rs = RadioSetting("poweron_msg.line1", "Power-On Message 1",
RadioSettingValueString(0, 7, _filter(_msg.line1)))
other.append(rs)
rs = RadioSetting("poweron_msg.line2", "Power-On Message 2",
RadioSettingValueString(0, 7, _filter(_msg.line2)))
other.append(rs)
# Work mode settings
rs = RadioSetting(
"settings.displayab", "Display",
RadioSettingValueList(LIST_AB, LIST_AB[_mem.settings.displayab]))
work.append(rs)
rs = RadioSetting("settings.keylock", "Keypad Lock",
RadioSettingValueBoolean(_mem.settings.keylock))
work.append(rs)
rs = RadioSetting(
"wmchannel.mrcha", "MR A Channel",
RadioSettingValueInteger(1, 15, _mem.wmchannel.mrcha))
work.append(rs)
rs = RadioSetting(
"wmchannel.mrchb", "MR B Channel",
RadioSettingValueInteger(1, 15, _mem.wmchannel.mrchb))
work.append(rs)
# broadcast FM settings
_fm_presets = self._memobj.fm_presets
if _fm_presets <= 108.0 * 10 - 650:
preset = _fm_presets / 10.0 + 65
elif _fm_presets >= 65.0 * 10 and _fm_presets <= 108.0 * 10:
preset = _fm_presets / 10.0
else:
preset = 76.0
rs = RadioSetting("fm_presets", "FM Preset(MHz)",
RadioSettingValueFloat(65, 108.0, preset, 0.1, 1))
fm_preset.append(rs)
# DTMF settings
def apply_code(setting, obj, length):
code = []
for j in range(0, length):
try:
code.append(DTMF_CHARS.index(str(setting.value)[j]))
except IndexError:
code.append(0xFF)
obj.code = code
for i in range(0, 15):
_codeobj = self._memobj.pttid[i].code
_code = "".join([DTMF_CHARS[x] for x in _codeobj if int(x) < 0x1F])
val = RadioSettingValueString(0, 5, _code, False)
val.set_charset(DTMF_CHARS)
pttid = RadioSetting("pttid/%i.code" % i,
"Signal Code %i" % (i + 1), val)
pttid.set_apply_callback(apply_code, self._memobj.pttid[i], 5)
dtmfe.append(pttid)
if _mem.ani.dtmfon > 0xC3:
val = 0x03
else:
val = _mem.ani.dtmfon
rs = RadioSetting(
"ani.dtmfon", "DTMF Speed (on)",
RadioSettingValueList(LIST_DTMFSPEED, LIST_DTMFSPEED[val]))
dtmfe.append(rs)
if _mem.ani.dtmfoff > 0xC3:
val = 0x03
else:
val = _mem.ani.dtmfoff
rs = RadioSetting(
"ani.dtmfoff", "DTMF Speed (off)",
RadioSettingValueList(LIST_DTMFSPEED, LIST_DTMFSPEED[val]))
dtmfe.append(rs)
_codeobj = self._memobj.ani.code
_code = "".join([DTMF_CHARS[x] for x in _codeobj if int(x) < 0x1F])
val = RadioSettingValueString(0, 5, _code, False)
val.set_charset(DTMF_CHARS)
rs = RadioSetting("ani.code", "ANI Code", val)
rs.set_apply_callback(apply_code, self._memobj.ani, 5)
dtmfe.append(rs)
rs = RadioSetting(
"ani.aniid", "When to send ANI ID",
RadioSettingValueList(LIST_PTTID, LIST_PTTID[_mem.ani.aniid]))
dtmfe.append(rs)
# Service settings
for index in range(0, 10):
key = "squelch.vhf.sql%i" % (index)
_obj = self._memobj.squelch.vhf
val = RadioSettingValueInteger(0, 123,
getattr(_obj, "sql%i" % (index)))
if index == 0:
val.set_mutable(False)
name = "Squelch %i" % (index)
rs = RadioSetting(key, name, val)
service.append(rs)
return top
def get_settings(self):
_settings = self._memobj.settings
basic = RadioSettingGroup("basic", "Basic")
cw = RadioSettingGroup("cw", "CW")
packet = RadioSettingGroup("packet", "Digital & packet")
panel = RadioSettingGroup("panel", "Panel settings")
extended = RadioSettingGroup("extended", "Extended")
panelcontr = RadioSettingGroup("panelcontr", "Panel controls")
top = RadioSettingGroup("top", "All Settings", basic, cw, packet,
panelcontr, panel, extended)
rs = RadioSetting("extended_menu", "Extended menu",
RadioSettingValueBoolean(_settings.extended_menu))
extended.append(rs)
rs = RadioSetting("ars_144", "144MHz ARS",
RadioSettingValueBoolean(_settings.ars_144))
basic.append(rs)
rs = RadioSetting("ars_430", "430MHz ARS",
RadioSettingValueBoolean(_settings.ars_430))
basic.append(rs)
options = ["enable", "disable"]
rs = RadioSetting(
"disable_amfm_dial", "AM&FM Dial",
RadioSettingValueList(options,
options[_settings.disable_amfm_dial]))
panel.append(rs)
rs = RadioSetting("am_mic", "AM mic gain",
RadioSettingValueInteger(0, 100, _settings.am_mic))
basic.append(rs)
options = ["OFF", "1h", "2h", "3h", "4h", "5h", "6h"]
rs = RadioSetting(
"apo_time", "APO time",
RadioSettingValueList(options, options[_settings.apo_time]))
basic.append(rs)
options = ["OFF", "Range", "All"]
rs = RadioSetting(
"arts_beep", "ARTS beep",
RadioSettingValueList(options, options[_settings.arts_beep]))
basic.append(rs)
rs = RadioSetting("arts_id", "ARTS ID",
RadioSettingValueBoolean(_settings.arts_id))
extended.append(rs)
s = RadioSettingValueString(
0, 10,
''.join([self._CALLSIGN_CHARSET[x]
for x in self._memobj.arts_idw]))
s.set_charset(self._CALLSIGN_CHARSET)
rs = RadioSetting("arts_idw", "ARTS IDW", s)
extended.append(rs)
s = RadioSettingValueString(
0, 40, ''.join(
[self._BEACON_CHARSET[x] for x in self._memobj.beacon_text1]))
s.set_charset(self._BEACON_CHARSET)
rs = RadioSetting("beacon_text1", "Beacon text1", s)
extended.append(rs)
s = RadioSettingValueString(
0, 40, ''.join(
[self._BEACON_CHARSET[x] for x in self._memobj.beacon_text2]))
s.set_charset(self._BEACON_CHARSET)
rs = RadioSetting("beacon_text2", "Beacon text2", s)
extended.append(rs)
s = RadioSettingValueString(
0, 40, ''.join(
[self._BEACON_CHARSET[x] for x in self._memobj.beacon_text3]))
s.set_charset(self._BEACON_CHARSET)
rs = RadioSetting("beacon_text3", "Beacon text3", s)
extended.append(rs)
options = ["OFF"] + ["%i sec" % i for i in range(1, 256)]
rs = RadioSetting(
"beacon_time", "Beacon time",
RadioSettingValueList(options, options[_settings.beacon_time]))
extended.append(rs)
options = ["440Hz", "880Hz", "1760Hz"]
rs = RadioSetting(
"beep_tone", "Beep tone",
RadioSettingValueList(options, options[_settings.beep_tone]))
panel.append(rs)
rs = RadioSetting("beep_vol", "Beep volume",
RadioSettingValueInteger(0, 100, _settings.beep_vol))
panel.append(rs)
rs = RadioSetting(
"r_lsb_car", "LSB Rx carrier point (*10 Hz)",
RadioSettingValueInteger(-30, 30, _settings.r_lsb_car))
extended.append(rs)
rs = RadioSetting(
"r_usb_car", "USB Rx carrier point (*10 Hz)",
RadioSettingValueInteger(-30, 30, _settings.r_usb_car))
extended.append(rs)
rs = RadioSetting(
"t_lsb_car", "LSB Tx carrier point (*10 Hz)",
RadioSettingValueInteger(-30, 30, _settings.t_lsb_car))
extended.append(rs)
rs = RadioSetting(
"t_usb_car", "USB Tx carrier point (*10 Hz)",
RadioSettingValueInteger(-30, 30, _settings.t_usb_car))
extended.append(rs)
options = ["4800", "9600", "38400"]
rs = RadioSetting(
"cat_rate", "CAT rate",
RadioSettingValueList(options, options[_settings.cat_rate]))
basic.append(rs)
options = ["CAT", "Linear", "Tuner"]
rs = RadioSetting(
"cat_lin_tun", "CAT/LIN/TUN selection",
RadioSettingValueList(options, options[_settings.cat_lin_tun]))
extended.append(rs)
options = ["MAIN", "VFO/MEM",
"CLAR"] # TODO test the 3 options on non D radio
# which have only SEL and MAIN
rs = RadioSetting(
"clar_dial_sel", "Clarifier dial selection",
RadioSettingValueList(options, options[_settings.clar_dial_sel]))
panel.append(rs)
rs = RadioSetting("cw_auto_mode", "CW Automatic mode",
RadioSettingValueBoolean(_settings.cw_auto_mode))
cw.append(rs)
options = ["USB", "LSB", "AUTO"]
rs = RadioSetting(
"cw_bfo", "CW BFO",
RadioSettingValueList(options, options[_settings.cw_bfo]))
cw.append(rs)
options = ["FULL"] + ["%i ms" % (i * 10) for i in range(3, 301)]
val = (_settings.cw_delay + _settings.cw_delay_hi * 256) - 2
rs = RadioSetting("cw_delay", "CW delay",
RadioSettingValueList(options, options[val]))
cw.append(rs)
options = ["Normal", "Reverse"]
rs = RadioSetting(
"cw_key_rev", "CW key reverse",
RadioSettingValueList(options, options[_settings.cw_key_rev]))
cw.append(rs)
rs = RadioSetting("cw_paddle", "CW paddle",
RadioSettingValueBoolean(_settings.cw_paddle))
cw.append(rs)
options = ["%i Hz" % i for i in range(400, 801, 100)]
rs = RadioSetting(
"cw_pitch", "CW pitch",
RadioSettingValueList(options, options[_settings.cw_pitch]))
cw.append(rs)
options = ["%i ms" % i for i in range(5, 31, 5)]
rs = RadioSetting(
"cw_qsk", "CW QSK",
RadioSettingValueList(options, options[_settings.cw_qsk]))
cw.append(rs)
rs = RadioSetting(
"cw_sidetone", "CW sidetone volume",
RadioSettingValueInteger(0, 100, _settings.cw_sidetone))
cw.append(rs)
options = ["%i wpm" % i for i in range(4, 61)]
rs = RadioSetting(
"cw_speed", "CW speed",
RadioSettingValueList(options, options[_settings.cw_speed]))
cw.append(rs)
options = ["Numeric", "Alphabet", "AlphaNumeric"]
rs = RadioSetting(
"cw_training", "CW trainig",
RadioSettingValueList(options, options[_settings.cw_training]))
cw.append(rs)
options = ["1:%1.1f" % (i / 10) for i in range(25, 46, 1)]
rs = RadioSetting(
"cw_weight", "CW weight",
RadioSettingValueList(options, options[_settings.cw_weight]))
cw.append(rs)
options = ["Tn-Rn", "Tn-Riv", "Tiv-Rn", "Tiv-Riv"]
rs = RadioSetting(
"dcs_inv", "DCS inv",
RadioSettingValueList(options, options[_settings.dcs_inv]))
extended.append(rs)
options = ["Fine", "Coarse"]
rs = RadioSetting(
"dial_step", "Dial step",
RadioSettingValueList(options, options[_settings.dial_step]))
panel.append(rs)
rs = RadioSetting(
"dig_disp", "Dig disp (*10 Hz)",
RadioSettingValueInteger(-300, 300, _settings.dig_disp))
packet.append(rs)
rs = RadioSetting("dig_mic", "Dig gain",
RadioSettingValueInteger(0, 100, _settings.dig_mic))
packet.append(rs)
options = ["RTTYL", "RTTYU", "PSK31-L", "PSK31-U", "USER-L", "USER-U"]
rs = RadioSetting(
"dig_mode", "Dig mode",
RadioSettingValueList(options, options[_settings.dig_mode]))
packet.append(rs)
rs = RadioSetting(
"dig_shift", "Dig shift (*10 Hz)",
RadioSettingValueInteger(-300, 300, _settings.dig_shift))
packet.append(rs)
rs = RadioSetting("dig_vox", "Dig vox",
RadioSettingValueInteger(0, 100, _settings.dig_vox))
packet.append(rs)
options = ["ARTS", "BAND", "FIX", "MEMGRP", "MODE", "MTR", "VFO"]
rs = RadioSetting(
"disp_color", "Display color mode",
RadioSettingValueList(options, options[_settings.disp_color]))
panel.append(rs)
rs = RadioSetting(
"disp_color_arts", "Display color ARTS set",
RadioSettingValueInteger(0, 1, _settings.disp_color_arts))
panel.append(rs)
rs = RadioSetting(
"disp_color_band", "Display color band set",
RadioSettingValueInteger(0, 1, _settings.disp_color_band))
panel.append(rs)
rs = RadioSetting(
"disp_color_memgrp", "Display color memory group set",
RadioSettingValueInteger(0, 1, _settings.disp_color_memgrp))
panel.append(rs)
rs = RadioSetting(
"disp_color_mode", "Display color mode set",
RadioSettingValueInteger(0, 1, _settings.disp_color_mode))
panel.append(rs)
rs = RadioSetting(
"disp_color_mtr", "Display color meter set",
RadioSettingValueInteger(0, 1, _settings.disp_color_mtr))
panel.append(rs)
rs = RadioSetting(
"disp_color_vfo", "Display color VFO set",
RadioSettingValueInteger(0, 1, _settings.disp_color_vfo))
panel.append(rs)
rs = RadioSetting(
"disp_color_fix", "Display color fix set",
RadioSettingValueInteger(1, 32, _settings.disp_color_fix + 1))
panel.append(rs)
rs = RadioSetting(
"disp_contrast", "Contrast",
RadioSettingValueInteger(3, 15, _settings.disp_contrast + 2))
panel.append(rs)
rs = RadioSetting(
"disp_intensity", "Intensity",
RadioSettingValueInteger(1, 3, _settings.disp_intensity))
panel.append(rs)
options = ["OFF", "Auto1", "Auto2", "ON"]
rs = RadioSetting(
"disp_mode", "Display backlight mode",
RadioSettingValueList(options, options[_settings.disp_mode]))
panel.append(rs)
options = ["60Hz", "120Hz", "240Hz"]
rs = RadioSetting(
"dsp_bpf", "Dsp band pass filter",
RadioSettingValueList(options, options[_settings.dsp_bpf]))
cw.append(rs)
options = [
"100Hz", "160Hz", "220Hz", "280Hz", "340Hz", "400Hz", "460Hz",
"520Hz", "580Hz", "640Hz", "720Hz", "760Hz", "820Hz", "880Hz",
"940Hz", "1000Hz"
]
rs = RadioSetting(
"dsp_hpf", "Dsp hi pass filter cut off",
RadioSettingValueList(options, options[_settings.dsp_hpf]))
basic.append(rs)
options = [
"1000Hz", "1160Hz", "1320Hz", "1480Hz", "1650Hz", "1800Hz",
"1970Hz", "2130Hz", "2290Hz", "2450Hz", "2610Hz", "2770Hz",
"2940Hz", "3100Hz", "3260Hz", "3420Hz", "3580Hz", "3740Hz",
"3900Hz", "4060Hz", "4230Hz", "4390Hz", "4550Hz", "4710Hz",
"4870Hz", "5030Hz", "5190Hz", "5390Hz", "5520Hz", "5680Hz",
"5840Hz", "6000Hz"
]
rs = RadioSetting(
"dsp_lpf", "Dsp low pass filter cut off",
RadioSettingValueList(options, options[_settings.dsp_lpf]))
basic.append(rs)
options = ["OFF", "LPF", "HPF", "BOTH"]
rs = RadioSetting(
"dsp_mic_eq", "Dsp mic equalization",
RadioSettingValueList(options, options[_settings.dsp_mic_eq]))
basic.append(rs)
rs = RadioSetting(
"dsp_nr", "DSP noise reduction level",
RadioSettingValueInteger(1, 16, _settings.dsp_nr + 1))
basic.append(rs)
# emergency only for US model
rs = RadioSetting("fm_mic", "FM mic gain",
RadioSettingValueInteger(0, 100, _settings.fm_mic))
basic.append(rs)
rs = RadioSetting("home_vfo", "Enable HOME to VFO moving",
RadioSettingValueBoolean(_settings.home_vfo))
panel.append(rs)
options = ["Dial", "Freq", "Panel", "All"]
rs = RadioSetting(
"lock_mode", "Lock mode",
RadioSettingValueList(options, options[_settings.lock_mode]))
panel.append(rs)
rs = RadioSetting("mem_group", "Mem group",
RadioSettingValueBoolean(_settings.mem_group))
basic.append(rs)
options = [
"CW SIDETONE", "CW SPEED", "MHz/MEM GRP", "MIC GAIN", "NB LEVEL",
"RF POWER", "STEP"
]
rs = RadioSetting(
"mem_vfo_dial_mode", "Mem/VFO dial mode",
RadioSettingValueList(options,
options[_settings.mem_vfo_dial_mode]))
panel.append(rs)
rs = RadioSetting("mic_scan", "Mic scan",
RadioSettingValueBoolean(_settings.mic_scan))
basic.append(rs)
options = ["NOR", "RMT", "CAT"]
rs = RadioSetting(
"mic_sel", "Mic selection",
RadioSettingValueList(options, options[_settings.mic_sel]))
extended.append(rs)
options = ["SIG", "CTR", "VLT", "N/A", "FS", "OFF"]
rs = RadioSetting(
"mtr_arx_sel", "Meter receive selection",
RadioSettingValueList(options, options[_settings.mtr_arx_sel]))
extended.append(rs)
options = ["PWR", "ALC", "MOD", "SWR", "VLT", "N/A", "OFF"]
rs = RadioSetting(
"mtr_atx_sel", "Meter transmit selection",
RadioSettingValueList(options, options[_settings.mtr_atx_sel]))
extended.append(rs)
rs = RadioSetting("mtr_peak_hold", "Meter peak hold",
RadioSettingValueBoolean(_settings.mtr_peak_hold))
extended.append(rs)
rs = RadioSetting("nb_level", "Noise blanking level",
RadioSettingValueInteger(0, 100, _settings.nb_level))
basic.append(rs)
s = RadioSettingValueString(
0, 4, ''.join([
self._CALLSIGN_CHARSET[x] for x in self._memobj.op_filter1_name
]))
s.set_charset(self._CALLSIGN_CHARSET)
rs = RadioSetting("op_filter1_name", "Optional filter1 name", s)
extended.append(rs)
s = RadioSettingValueString(
0, 4, ''.join([
self._CALLSIGN_CHARSET[x] for x in self._memobj.op_filter2_name
]))
s.set_charset(self._CALLSIGN_CHARSET)
rs = RadioSetting("op_filter2_name", "Optional filter2 name", s)
extended.append(rs)
rs = RadioSetting(
"pg_a", "Programmable key MFq:A",
RadioSettingValueList(self.PROGRAMMABLEOPTIONS,
self.PROGRAMMABLEOPTIONS[_settings.pg_a]))
extended.append(rs)
rs = RadioSetting(
"pg_b", "Programmable key MFq:B",
RadioSettingValueList(self.PROGRAMMABLEOPTIONS,
self.PROGRAMMABLEOPTIONS[_settings.pg_b]))
extended.append(rs)
rs = RadioSetting(
"pg_c", "Programmable key MFq:C",
RadioSettingValueList(self.PROGRAMMABLEOPTIONS,
self.PROGRAMMABLEOPTIONS[_settings.pg_c]))
extended.append(rs)
rs = RadioSetting(
"pg_acc", "Programmable mic key ACC",
RadioSettingValueList(self.PROGRAMMABLEOPTIONS,
self.PROGRAMMABLEOPTIONS[_settings.pg_acc]))
extended.append(rs)
rs = RadioSetting(
"pg_p1", "Programmable mic key P1",
RadioSettingValueList(self.PROGRAMMABLEOPTIONS,
self.PROGRAMMABLEOPTIONS[_settings.pg_p1]))
extended.append(rs)
rs = RadioSetting(
"pg_p2", "Programmable mic key P2",
RadioSettingValueList(self.PROGRAMMABLEOPTIONS,
self.PROGRAMMABLEOPTIONS[_settings.pg_p2]))
extended.append(rs)
rs = RadioSetting("pkt1200", "Packet 1200 gain level",
RadioSettingValueInteger(0, 100, _settings.pkt1200))
packet.append(rs)
rs = RadioSetting("pkt9600", "Packet 9600 gain level",
RadioSettingValueInteger(0, 100, _settings.pkt9600))
packet.append(rs)
options = ["1200", "9600"]
rs = RadioSetting(
"pkt_rate", "Packet rate",
RadioSettingValueList(options, options[_settings.pkt_rate]))
packet.append(rs)
rs = RadioSetting(
"proc_level", "Proc level",
RadioSettingValueInteger(0, 100, _settings.proc_level))
basic.append(rs)
rs = RadioSetting(
"rf_power_hf", "Rf power set HF",
RadioSettingValueInteger(5, 100, _settings.rf_power_hf))
basic.append(rs)
rs = RadioSetting(
"rf_power_6m", "Rf power set 6m",
RadioSettingValueInteger(5, 100, _settings.rf_power_6m))
basic.append(rs)
rs = RadioSetting(
"rf_power_vhf", "Rf power set VHF",
RadioSettingValueInteger(5, 50, _settings.rf_power_vhf))
basic.append(rs)
rs = RadioSetting(
"rf_power_uhf", "Rf power set UHF",
RadioSettingValueInteger(2, 20, _settings.rf_power_uhf))
basic.append(rs)
options = ["TIME", "BUSY", "STOP"]
rs = RadioSetting(
"scan_mode", "Scan mode",
RadioSettingValueList(options, options[_settings.scan_mode]))
basic.append(rs)
rs = RadioSetting(
"scan_resume", "Scan resume",
RadioSettingValueInteger(1, 10, _settings.scan_resume))
basic.append(rs)
rs = RadioSetting("split_tone", "Split tone enable",
RadioSettingValueBoolean(_settings.split_tone))
extended.append(rs)
options = ["RF-Gain", "Squelch"]
rs = RadioSetting(
"sql_rf_gain", "Squelch/RF-Gain",
RadioSettingValueList(options, options[_settings.sql_rf_gain]))
panel.append(rs)
rs = RadioSetting("ssb_mic", "SSB Mic gain",
RadioSettingValueInteger(0, 100, _settings.ssb_mic))
basic.append(rs)
options = ["Off"] + ["%i" % i for i in range(1, 21)]
rs = RadioSetting(
"tot_time", "Time-out timer",
RadioSettingValueList(options, options[_settings.tot_time]))
basic.append(rs)
options = ["OFF", "ATAS(HF)", "ATAS(HF&50)", "ATAS(ALL)", "TUNER"]
rs = RadioSetting(
"tuner_atas", "Tuner/ATAS device",
RadioSettingValueList(options, options[_settings.tuner_atas]))
extended.append(rs)
rs = RadioSetting(
"tx_if_filter", "Transmit IF filter",
RadioSettingValueList(self.FILTERS,
self.FILTERS[_settings.tx_if_filter]))
basic.append(rs)
rs = RadioSetting("vox_delay", "VOX delay (*100 ms)",
RadioSettingValueInteger(1, 30, _settings.vox_delay))
basic.append(rs)
rs = RadioSetting("vox_gain", "VOX Gain",
RadioSettingValueInteger(1, 100, _settings.vox_gain))
basic.append(rs)
rs = RadioSetting(
"xvtr_a", "Xvtr A displacement",
RadioSettingValueInteger(
-4294967295, 4294967295,
self._memobj.xvtr_a_offset *
(-1 if _settings.xvtr_a_negative else 1)))
extended.append(rs)
rs = RadioSetting(
"xvtr_b", "Xvtr B displacement",
RadioSettingValueInteger(
-4294967295, 4294967295,
self._memobj.xvtr_b_offset *
(-1 if _settings.xvtr_b_negative else 1)))
extended.append(rs)
options = ["OFF", "XVTR A", "XVTR B"]
rs = RadioSetting(
"xvtr_sel", "Transverter function selection",
RadioSettingValueList(options, options[_settings.xvtr_sel]))
extended.append(rs)
rs = RadioSetting("disp", "Display large",
RadioSettingValueBoolean(_settings.disp))
panel.append(rs)
rs = RadioSetting("nb", "Noise blanker",
RadioSettingValueBoolean(_settings.nb))
panelcontr.append(rs)
options = ["Auto", "Fast", "Slow", "Off"]
rs = RadioSetting(
"agc", "AGC", RadioSettingValueList(options,
options[_settings.agc]))
panelcontr.append(rs)
options = ["PWR", "ALC", "SWR", "MOD"]
rs = RadioSetting(
"pwr_meter_mode", "Power meter mode",
RadioSettingValueList(options, options[_settings.pwr_meter_mode]))
panelcontr.append(rs)
rs = RadioSetting("vox", "Vox",
RadioSettingValueBoolean(_settings.vox))
panelcontr.append(rs)
rs = RadioSetting("bk", "Semi break-in",
RadioSettingValueBoolean(_settings.bk))
cw.append(rs)
rs = RadioSetting("kyr", "Keyer",
RadioSettingValueBoolean(_settings.kyr))
cw.append(rs)
options = ["enabled", "disabled"]
rs = RadioSetting(
"fst", "Fast",
RadioSettingValueList(options, options[_settings.fst]))
panelcontr.append(rs)
options = ["enabled", "disabled"]
rs = RadioSetting(
"lock", "Lock",
RadioSettingValueList(options, options[_settings.lock]))
panelcontr.append(rs)
rs = RadioSetting("scope_peakhold", "Scope max hold",
RadioSettingValueBoolean(_settings.scope_peakhold))
panelcontr.append(rs)
options = ["21", "31", "127"]
rs = RadioSetting(
"scope_width", "Scope width (channels)",
RadioSettingValueList(options, options[_settings.scope_width]))
panelcontr.append(rs)
rs = RadioSetting("proc", "Speech processor",
RadioSettingValueBoolean(_settings.proc))
panelcontr.append(rs)
return top
def get_settings(self):
"""Translate the bit in the mem_struct into settings in the UI"""
_mem = self._memobj
basic = RadioSettingGroup("basic", "Basic Settings")
advanced = RadioSettingGroup("advanced", "Advanced Settings")
other = RadioSettingGroup("other", "Other Settings")
work = RadioSettingGroup("work", "Work Mode Settings")
fm_preset = RadioSettingGroup("fm_preset", "FM Preset")
dtmfe = RadioSettingGroup("dtmfe", "DTMF Encode Settings")
service = RadioSettingGroup("service", "Service Settings")
top = RadioSettings(basic, advanced, other, work, fm_preset, dtmfe,
service)
# Basic settings
if _mem.settings.squelch > 0x09:
val = 0x00
else:
val = _mem.settings.squelch
rs = RadioSetting(
"settings.squelch", "Squelch",
RadioSettingValueList(LIST_OFF1TO9, LIST_OFF1TO9[val]))
basic.append(rs)
if _mem.settings.save > 0x04:
val = 0x00
else:
val = _mem.settings.save
rs = RadioSetting("settings.save", "Battery Saver",
RadioSettingValueList(LIST_SAVE, LIST_SAVE[val]))
basic.append(rs)
if _mem.settings.vox > 0x0A:
val = 0x00
else:
val = _mem.settings.vox
rs = RadioSetting(
"settings.vox", "Vox",
RadioSettingValueList(LIST_OFF1TO10, LIST_OFF1TO10[val]))
basic.append(rs)
if _mem.settings.abr > 0x0A:
val = 0x00
else:
val = _mem.settings.abr
rs = RadioSetting(
"settings.abr", "Backlight Timeout",
RadioSettingValueList(LIST_OFF1TO10, LIST_OFF1TO10[val]))
basic.append(rs)
rs = RadioSetting("settings.tdr", "Dual Watch",
RadioSettingValueBoolean(_mem.settings.tdr))
basic.append(rs)
rs = RadioSetting("settings.beep", "Beep",
RadioSettingValueBoolean(_mem.settings.beep))
basic.append(rs)
if _mem.settings.timeout > 0x27:
val = 0x03
else:
val = _mem.settings.timeout
rs = RadioSetting(
"settings.timeout", "Timeout Timer",
RadioSettingValueList(LIST_TIMEOUT, LIST_TIMEOUT[val]))
basic.append(rs)
if _mem.settings.voice > 0x02:
val = 0x01
else:
val = _mem.settings.voice
rs = RadioSetting("settings.voice", "Voice Prompt",
RadioSettingValueList(LIST_VOICE, LIST_VOICE[val]))
basic.append(rs)
rs = RadioSetting(
"settings.dtmfst", "DTMF Sidetone",
RadioSettingValueList(LIST_DTMFST,
LIST_DTMFST[_mem.settings.dtmfst]))
basic.append(rs)
if _mem.settings.screv > 0x02:
val = 0x01
else:
val = _mem.settings.screv
rs = RadioSetting("settings.screv", "Scan Resume",
RadioSettingValueList(LIST_RESUME, LIST_RESUME[val]))
basic.append(rs)
rs = RadioSetting(
"settings.pttid", "When to send PTT ID",
RadioSettingValueList(LIST_PTTID, LIST_PTTID[_mem.settings.pttid]))
basic.append(rs)
if _mem.settings.pttlt > 0x1E:
val = 0x05
else:
val = _mem.settings.pttlt
rs = RadioSetting("pttlt", "PTT ID Delay",
RadioSettingValueInteger(0, 50, val))
basic.append(rs)
rs = RadioSetting(
"settings.mdfa", "Display Mode (A)",
RadioSettingValueList(LIST_MODE, LIST_MODE[_mem.settings.mdfa]))
basic.append(rs)
rs = RadioSetting(
"settings.mdfb", "Display Mode (B)",
RadioSettingValueList(LIST_MODE, LIST_MODE[_mem.settings.mdfb]))
basic.append(rs)
rs = RadioSetting("settings.autolk", "Auto Lock Keypad",
RadioSettingValueBoolean(_mem.settings.autolk))
basic.append(rs)
rs = RadioSetting(
"settings.wtled", "Standby LED Color",
RadioSettingValueList(LIST_COLOR, LIST_COLOR[_mem.settings.wtled]))
basic.append(rs)
rs = RadioSetting(
"settings.rxled", "RX LED Color",
RadioSettingValueList(LIST_COLOR, LIST_COLOR[_mem.settings.rxled]))
basic.append(rs)
rs = RadioSetting(
"settings.txled", "TX LED Color",
RadioSettingValueList(LIST_COLOR, LIST_COLOR[_mem.settings.txled]))
basic.append(rs)
if _mem.settings.almod > 0x02:
val = 0x00
else:
val = _mem.settings.almod
rs = RadioSetting("settings.almod", "Alarm Mode",
RadioSettingValueList(LIST_ALMOD, LIST_ALMOD[val]))
basic.append(rs)
if _mem.settings.tcall > 0x05:
val = 0x00
else:
val = _mem.settings.tcall
rs = RadioSetting("settings.tcall", "Tone Burst Frequency",
RadioSettingValueList(LIST_TCALL, LIST_TCALL[val]))
basic.append(rs)
rs = RadioSetting("settings.ste", "Squelch Tail Eliminate (HT to HT)",
RadioSettingValueBoolean(_mem.settings.ste))
basic.append(rs)
if _mem.settings.rpste > 0x0A:
val = 0x00
else:
val = _mem.settings.rpste
rs = RadioSetting("settings.rpste",
"Squelch Tail Eliminate (repeater)",
RadioSettingValueList(LIST_RPSTE, LIST_RPSTE[val]))
basic.append(rs)
if _mem.settings.rptrl > 0x0A:
val = 0x00
else:
val = _mem.settings.rptrl
rs = RadioSetting(
"settings.rptrl", "STE Repeater Delay",
RadioSettingValueList(LIST_STEDELAY, LIST_STEDELAY[val]))
basic.append(rs)
rs = RadioSetting(
"settings.ponmsg", "Power-On Message",
RadioSettingValueList(LIST_PONMSG,
LIST_PONMSG[_mem.settings.ponmsg]))
basic.append(rs)
rs = RadioSetting("settings.roger", "Roger Beep",
RadioSettingValueBoolean(_mem.settings.roger))
basic.append(rs)
# Advanced settings
rs = RadioSetting("settings.reset", "RESET Menu",
RadioSettingValueBoolean(_mem.settings.reset))
advanced.append(rs)
rs = RadioSetting("settings.menu", "All Menus",
RadioSettingValueBoolean(_mem.settings.menu))
advanced.append(rs)
rs = RadioSetting("settings.fmradio", "Broadcast FM Radio",
RadioSettingValueBoolean(_mem.settings.fmradio))
advanced.append(rs)
rs = RadioSetting("settings.alarm", "Alarm Sound",
RadioSettingValueBoolean(_mem.settings.alarm))
advanced.append(rs)
# Other settings
def _filter(name):
filtered = ""
for char in str(name):
if char in chirp_common.CHARSET_ASCII:
filtered += char
else:
filtered += " "
return filtered
_msg = _mem.firmware_msg
val = RadioSettingValueString(0, 8, _filter(_msg.line1))
val.set_mutable(False)
rs = RadioSetting("firmware_msg.line1", "Firmware Message 1", val)
other.append(rs)
val = RadioSettingValueString(0, 8, _filter(_msg.line2))
val.set_mutable(False)
rs = RadioSetting("firmware_msg.line2", "Firmware Message 2", val)
other.append(rs)
_msg = _mem.sixpoweron_msg
val = RadioSettingValueString(0, 8, _filter(_msg.line1))
val.set_mutable(False)
rs = RadioSetting("sixpoweron_msg.line1", "6+Power-On Message 1", val)
other.append(rs)
val = RadioSettingValueString(0, 8, _filter(_msg.line2))
val.set_mutable(False)
rs = RadioSetting("sixpoweron_msg.line2", "6+Power-On Message 2", val)
other.append(rs)
_msg = _mem.poweron_msg
rs = RadioSetting("poweron_msg.line1", "Power-On Message 1",
RadioSettingValueString(0, 7, _filter(_msg.line1)))
other.append(rs)
rs = RadioSetting("poweron_msg.line2", "Power-On Message 2",
RadioSettingValueString(0, 7, _filter(_msg.line2)))
other.append(rs)
lower = 136
upper = 174
rs = RadioSetting(
"limits.vhf.lower", "VHF Lower Limit (MHz)",
RadioSettingValueInteger(lower, upper, _mem.limits.vhf.lower))
other.append(rs)
rs = RadioSetting(
"limits.vhf.upper", "VHF Upper Limit (MHz)",
RadioSettingValueInteger(lower, upper, _mem.limits.vhf.upper))
other.append(rs)
lower = 400
upper = 520
rs = RadioSetting(
"limits.uhf.lower", "UHF Lower Limit (MHz)",
RadioSettingValueInteger(lower, upper, _mem.limits.uhf.lower))
other.append(rs)
rs = RadioSetting(
"limits.uhf.upper", "UHF Upper Limit (MHz)",
RadioSettingValueInteger(lower, upper, _mem.limits.uhf.upper))
other.append(rs)
# Work mode settings
rs = RadioSetting(
"settings.displayab", "Display",
RadioSettingValueList(LIST_AB, LIST_AB[_mem.settings.displayab]))
work.append(rs)
rs = RadioSetting(
"settings.workmode", "VFO/MR Mode",
RadioSettingValueList(LIST_WORKMODE,
LIST_WORKMODE[_mem.settings.workmode]))
work.append(rs)
rs = RadioSetting("settings.keylock", "Keypad Lock",
RadioSettingValueBoolean(_mem.settings.keylock))
work.append(rs)
rs = RadioSetting(
"wmchannel.mrcha", "MR A Channel",
RadioSettingValueInteger(0, 127, _mem.wmchannel.mrcha))
work.append(rs)
rs = RadioSetting(
"wmchannel.mrchb", "MR B Channel",
RadioSettingValueInteger(0, 127, _mem.wmchannel.mrchb))
work.append(rs)
def convert_bytes_to_freq(bytes):
real_freq = 0
for byte in bytes:
real_freq = (real_freq * 10) + byte
return chirp_common.format_freq(real_freq * 10)
def my_validate(value):
_vhf_lower = int(_mem.limits.vhf.lower)
_vhf_upper = int(_mem.limits.vhf.upper)
_uhf_lower = int(_mem.limits.uhf.lower)
_uhf_upper = int(_mem.limits.uhf.upper)
value = chirp_common.parse_freq(value)
msg = ("Can't be less than %i.0000")
if value > 99000000 and value < _vhf_lower * 1000000:
raise InvalidValueError(msg % _vhf_lower)
msg = ("Can't be between %i.9975-%i.0000")
if _vhf_upper * 1000000 <= value and value < _uhf_lower * 1000000:
raise InvalidValueError(msg % (_vhf_upper - 1, _uhf_lower))
msg = ("Can't be greater than %i.9975")
if value > 99000000 and value >= _uhf_upper * 1000000:
raise InvalidValueError(msg % (_uhf_upper - 1))
return chirp_common.format_freq(value)
def apply_freq(setting, obj):
value = chirp_common.parse_freq(str(setting.value)) / 10
for i in range(7, -1, -1):
obj.freq[i] = value % 10
value /= 10
val1a = RadioSettingValueString(0, 10,
convert_bytes_to_freq(_mem.vfo.a.freq))
val1a.set_validate_callback(my_validate)
rs = RadioSetting("vfo.a.freq", "VFO A Frequency", val1a)
rs.set_apply_callback(apply_freq, _mem.vfo.a)
work.append(rs)
val1b = RadioSettingValueString(0, 10,
convert_bytes_to_freq(_mem.vfo.b.freq))
val1b.set_validate_callback(my_validate)
rs = RadioSetting("vfo.b.freq", "VFO B Frequency", val1b)
rs.set_apply_callback(apply_freq, _mem.vfo.b)
work.append(rs)
rs = RadioSetting(
"vfo.a.sftd", "VFO A Shift",
RadioSettingValueList(LIST_SHIFTD, LIST_SHIFTD[_mem.vfo.a.sftd]))
work.append(rs)
rs = RadioSetting(
"vfo.b.sftd", "VFO B Shift",
RadioSettingValueList(LIST_SHIFTD, LIST_SHIFTD[_mem.vfo.b.sftd]))
work.append(rs)
def convert_bytes_to_offset(bytes):
real_offset = 0
for byte in bytes:
real_offset = (real_offset * 10) + byte
return chirp_common.format_freq(real_offset * 1000)
def apply_offset(setting, obj):
value = chirp_common.parse_freq(str(setting.value)) / 1000
for i in range(5, -1, -1):
obj.offset[i] = value % 10
value /= 10
val1a = RadioSettingValueString(
0, 10, convert_bytes_to_offset(_mem.vfo.a.offset))
rs = RadioSetting("vfo.a.offset", "VFO A Offset", val1a)
rs.set_apply_callback(apply_offset, _mem.vfo.a)
work.append(rs)
val1b = RadioSettingValueString(
0, 10, convert_bytes_to_offset(_mem.vfo.b.offset))
rs = RadioSetting("vfo.b.offset", "VFO B Offset", val1b)
rs.set_apply_callback(apply_offset, _mem.vfo.b)
work.append(rs)
rs = RadioSetting(
"vfo.a.txpower", "VFO A Power",
RadioSettingValueList(LIST_TXPOWER,
LIST_TXPOWER[_mem.vfo.a.txpower]))
work.append(rs)
rs = RadioSetting(
"vfo.b.txpower", "VFO B Power",
RadioSettingValueList(LIST_TXPOWER,
LIST_TXPOWER[_mem.vfo.b.txpower]))
work.append(rs)
rs = RadioSetting(
"vfo.a.widenarr", "VFO A Bandwidth",
RadioSettingValueList(LIST_BANDWIDTH,
LIST_BANDWIDTH[_mem.vfo.a.widenarr]))
work.append(rs)
rs = RadioSetting(
"vfo.b.widenarr", "VFO B Bandwidth",
RadioSettingValueList(LIST_BANDWIDTH,
LIST_BANDWIDTH[_mem.vfo.b.widenarr]))
work.append(rs)
rs = RadioSetting(
"vfo.a.scode", "VFO A S-CODE",
RadioSettingValueList(LIST_SCODE, LIST_SCODE[_mem.vfo.a.scode]))
work.append(rs)
rs = RadioSetting(
"vfo.b.scode", "VFO B S-CODE",
RadioSettingValueList(LIST_SCODE, LIST_SCODE[_mem.vfo.b.scode]))
work.append(rs)
rs = RadioSetting(
"vfo.a.step", "VFO A Tuning Step",
RadioSettingValueList(LIST_STEP, LIST_STEP[_mem.vfo.a.step]))
work.append(rs)
rs = RadioSetting(
"vfo.b.step", "VFO B Tuning Step",
RadioSettingValueList(LIST_STEP, LIST_STEP[_mem.vfo.b.step]))
work.append(rs)
# broadcast FM settings
_fm_presets = self._memobj.fm_presets
if _fm_presets <= 108.0 * 10 - 650:
preset = _fm_presets / 10.0 + 65
elif _fm_presets >= 65.0 * 10 and _fm_presets <= 108.0 * 10:
preset = _fm_presets / 10.0
else:
preset = 76.0
rs = RadioSetting("fm_presets", "FM Preset(MHz)",
RadioSettingValueFloat(65, 108.0, preset, 0.1, 1))
fm_preset.append(rs)
# DTMF settings
def apply_code(setting, obj, length):
code = []
for j in range(0, length):
try:
code.append(DTMF_CHARS.index(str(setting.value)[j]))
except IndexError:
code.append(0xFF)
obj.code = code
for i in range(0, 15):
_codeobj = self._memobj.pttid[i].code
_code = "".join([DTMF_CHARS[x] for x in _codeobj if int(x) < 0x1F])
val = RadioSettingValueString(0, 5, _code, False)
val.set_charset(DTMF_CHARS)
pttid = RadioSetting("pttid/%i.code" % i,
"Signal Code %i" % (i + 1), val)
pttid.set_apply_callback(apply_code, self._memobj.pttid[i], 5)
dtmfe.append(pttid)
if _mem.ani.dtmfon > 0xC3:
val = 0x03
else:
val = _mem.ani.dtmfon
rs = RadioSetting(
"ani.dtmfon", "DTMF Speed (on)",
RadioSettingValueList(LIST_DTMFSPEED, LIST_DTMFSPEED[val]))
dtmfe.append(rs)
if _mem.ani.dtmfoff > 0xC3:
val = 0x03
else:
val = _mem.ani.dtmfoff
rs = RadioSetting(
"ani.dtmfoff", "DTMF Speed (off)",
RadioSettingValueList(LIST_DTMFSPEED, LIST_DTMFSPEED[val]))
dtmfe.append(rs)
_codeobj = self._memobj.ani.code
_code = "".join([DTMF_CHARS[x] for x in _codeobj if int(x) < 0x1F])
val = RadioSettingValueString(0, 5, _code, False)
val.set_charset(DTMF_CHARS)
rs = RadioSetting("ani.code", "ANI Code", val)
rs.set_apply_callback(apply_code, self._memobj.ani, 5)
dtmfe.append(rs)
rs = RadioSetting(
"ani.aniid", "When to send ANI ID",
RadioSettingValueList(LIST_PTTID, LIST_PTTID[_mem.ani.aniid]))
dtmfe.append(rs)
# Service settings
for index in range(0, 10):
key = "squelch.sql%i" % (index)
_obj = self._memobj.squelch
val = RadioSettingValueInteger(0, 123,
getattr(_obj, "sql%i" % (index)))
if index == 0:
val.set_mutable(False)
name = "Squelch %i" % (index)
rs = RadioSetting(key, name, val)
service.append(rs)
return top
def get_settings(self):
# """Translate the bit in the mem_struct into settings in the UI"""
_mem = self._memobj
basic = RadioSettingGroup("basic", "Basic Settings")
advanced = RadioSettingGroup("advanced", "Advanced Settings")
#other = RadioSettingGroup("other", "Other Settings")
#work = RadioSettingGroup("work", "Work Mode Settings")
#fm_preset = RadioSettingGroup("fm_preset", "FM Preset")
#dtmfe = RadioSettingGroup("dtmfe", "DTMF Encode Settings")
#dtmfd = RadioSettingGroup("dtmfd", "DTMF Decode Settings")
#service = RadioSettingGroup("service", "Service Settings")
#top = RadioSettings(basic, advanced, other, work, fm_preset, dtmfe,
# dtmfd, service)
top = RadioSettings(basic, advanced, )
# Basic settings
rs = RadioSetting("settings.beep", "Beep",
RadioSettingValueBoolean(_mem.settings.beep))
basic.append(rs)
if _mem.settings.squelcha > 0x09:
val = 0x00
else:
val = _mem.settings.squelcha
rs = RadioSetting("squelcha", "Squelch Level A",
RadioSettingValueInteger(0, 9, _mem.settings.squelcha))
basic.append(rs)
if _mem.settings.squelchb > 0x09:
val = 0x00
else:
val = _mem.settings.squelchb
rs = RadioSetting("squelchb", "Squelch Level B",
RadioSettingValueInteger(0, 9, _mem.settings.squelchb))
basic.append(rs)
if _mem.settings.voice > 0x02:
val = 0x01
else:
val = _mem.settings.voice
rs = RadioSetting("settings.voice", "Voice Prompt",
RadioSettingValueList(
LIST_VOICE, LIST_VOICE[val]))
basic.append(rs)
if _mem.settings.vox > 0x0A:
val = 0x00
else:
val = _mem.settings.vox
rs = RadioSetting("settings.vox", "VOX",
RadioSettingValueList(
LIST_OFF1TO10, LIST_OFF1TO10[val]))
basic.append(rs)
rs = RadioSetting("settings.autolk", "Automatic Key Lock",
RadioSettingValueBoolean(_mem.settings.autolk))
basic.append(rs)
if _mem.settings.screv > 0x02:
val = 0x01
else:
val = _mem.settings.screv
rs = RadioSetting("settings.screv", "Scan Resume",
RadioSettingValueList(
LIST_RESUME, LIST_RESUME[val]))
basic.append(rs)
if _mem.settings.toa > 0x0A:
val = 0x00
else:
val = _mem.settings.toa
rs = RadioSetting("settings.toa", "Time-out Pre-Alert",
RadioSettingValueList(
LIST_OFF1TO10, LIST_OFF1TO10[val]))
basic.append(rs)
if _mem.settings.timeout > 0x28:
val = 0x03
else:
val = _mem.settings.timeout
rs = RadioSetting("settings.timeout", "Timeout Timer",
RadioSettingValueList(
LIST_TIMEOUT, LIST_TIMEOUT[val]))
basic.append(rs)
rs = RadioSetting("settings.wtled", "Standby LED Color",
RadioSettingValueList(
LIST_COLOR, LIST_COLOR[_mem.settings.wtled]))
basic.append(rs)
rs = RadioSetting("settings.rxled", "RX LED Color",
RadioSettingValueList(
LIST_COLOR, LIST_COLOR[_mem.settings.rxled]))
basic.append(rs)
rs = RadioSetting("settings.txled", "TX LED Color",
RadioSettingValueList(
LIST_COLOR, LIST_COLOR[_mem.settings.txled]))
basic.append(rs)
rs = RadioSetting("settings.roger", "Roger Beep",
RadioSettingValueList(LIST_ROGER, LIST_ROGER[
_mem.settings.roger]))
basic.append(rs)
rs = RadioSetting("settings.mdfa", "Display Mode (A)",
RadioSettingValueList(LIST_MODE, LIST_MODE[
_mem.settings.mdfa]))
basic.append(rs)
rs = RadioSetting("settings.mdfb", "Display Mode (B)",
RadioSettingValueList(LIST_MODE, LIST_MODE[
_mem.settings.mdfb]))
basic.append(rs)
rs = RadioSetting("settings.pf1", "PF1 Key Assignment",
RadioSettingValueList(LIST_PF1, LIST_PF1[
_mem.settings.pf1]))
basic.append(rs)
rs = RadioSetting("settings.tdr", "Dual Watch(TDR)",
RadioSettingValueBoolean(_mem.settings.tdr))
basic.append(rs)
rs = RadioSetting("settings.ani", "ANI",
RadioSettingValueBoolean(_mem.settings.ani))
basic.append(rs)
if _mem.settings.pttdly > 0x0A:
val = 0x00
else:
val = _mem.settings.pttdly
rs = RadioSetting("settings.pttdly", "PTT ID Delay",
RadioSettingValueList(
LIST_OFF1TO30, LIST_OFF1TO30[val]))
basic.append(rs)
rs = RadioSetting("settings.pttid", "When to send PTT ID",
RadioSettingValueList(LIST_PTTID,
LIST_PTTID[_mem.settings.pttid]))
basic.append(rs)
rs = RadioSetting("settings.dtmfst", "DTMF Sidetone",
RadioSettingValueList(LIST_DTMFST, LIST_DTMFST[
_mem.settings.dtmfst]))
basic.append(rs)
rs = RadioSetting("settings.ponmsg", "Power-On Message",
RadioSettingValueList(LIST_PONMSG, LIST_PONMSG[
_mem.settings.ponmsg]))
basic.append(rs)
rs = RadioSetting("settings.dw", "DW",
RadioSettingValueBoolean(_mem.settings.dw))
basic.append(rs)
# Advanced settings
rs = RadioSetting("settings.prioritych", "Priority Channel",
RadioSettingValueList(LIST_PRIORITY, LIST_PRIORITY[
_mem.settings.prioritych]))
advanced.append(rs)
rs = RadioSetting("settings.vfomr", "Work Mode",
RadioSettingValueList(LIST_WORKMODE, LIST_WORKMODE[
_mem.settings.vfomr]))
advanced.append(rs)
dtmfchars = "0123456789"
_codeobj = _mem.settings.code
_code = "".join([dtmfchars[x] for x in _codeobj if int(x) < 0x1F])
val = RadioSettingValueString(0, 3, _code, False)
val.set_charset(dtmfchars)
rs = RadioSetting("settings.code", "PTT-ID Code", val)
def apply_code(setting, obj):
code = []
for j in range(0, 3):
try:
code.append(dtmfchars.index(str(setting.value)[j]))
except IndexError:
code.append(0xFF)
obj.code = code
rs.set_apply_callback(apply_code, _mem.settings)
advanced.append(rs)
_codeobj = _mem.settings.password
_code = "".join([dtmfchars[x] for x in _codeobj if int(x) < 0x1F])
val = RadioSettingValueString(0, 6, _code, False)
val.set_charset(dtmfchars)
rs = RadioSetting("settings.password", "Control Password", val)
def apply_code(setting, obj):
code = []
for j in range(0, 6):
try:
code.append(dtmfchars.index(str(setting.value)[j]))
except IndexError:
code.append(0xFF)
obj.password = code
rs.set_apply_callback(apply_code, _mem.settings)
advanced.append(rs)
if _mem.settings.tdrab > 0x01:
val = 0x00
else:
val = _mem.settings.tdrab
rs = RadioSetting("settings.tdrab", "Dual Watch TX Priority",
RadioSettingValueList(
LIST_AB, LIST_AB[val]))
advanced.append(rs)
rs = RadioSetting("settings.keylk", "Key Lock",
RadioSettingValueBoolean(_mem.settings.keylk))
advanced.append(rs)
rs = RadioSetting("settings.control", "Control Code",
RadioSettingValueBoolean(_mem.settings.control))
advanced.append(rs)
return top
"""
def get_settings(self):
"""Translate the bit in the mem_struct into settings in the UI"""
_mem = self._memobj
basic = RadioSettingGroup("basic", "Basic Settings")
other = RadioSettingGroup("other", "Other Settings")
work = RadioSettingGroup("work", "Work Mode Settings")
dtmf = RadioSettingGroup("dtmf", "DTMF Settings")
top = RadioSettings(basic, other, work, dtmf)
# Basic
# Audio: A01-A04
aftone = RadioSetting("settings.aftone", "AF tone control",
RadioSettingValueList(LIST_AFTONE, LIST_AFTONE[
_mem.settings.aftone]))
basic.append(aftone)
spkr = RadioSetting("settings.spkr", "Speaker",
RadioSettingValueList(LIST_SPKR,LIST_SPKR[
_mem.settings.spkr]))
basic.append(spkr)
audio = RadioSetting("settings.audio", "Stereo/Mono",
RadioSettingValueList(LIST_AUDIO, LIST_AUDIO[
_mem.settings.audio]))
basic.append(audio)
sbmute = RadioSetting("settings.sbmute", "Sub band mute",
RadioSettingValueList(LIST_SBMUTE, LIST_SBMUTE[
_mem.settings.sbmute]))
basic.append(sbmute)
# TX/RX: B01-B08
mgain = RadioSetting("settings.mgain", "Mic gain",
RadioSettingValueList(LIST_MLNHM, LIST_MLNHM[
_mem.settings.mgain]))
basic.append(mgain)
ptt = RadioSetting("settings.ptt", "PTT mode",
RadioSettingValueList(LIST_PTT,LIST_PTT[
_mem.settings.ptt]))
basic.append(ptt)
# B03 (per channel)
# B04 (per channel)
rxexp = RadioSetting("settings.rxexp", "RX expansion",
RadioSettingValueList(LIST_RXEXP,LIST_RXEXP[
_mem.settings.rxexp]))
basic.append(rxexp)
vox = RadioSetting("settings.vox", "Vox",
RadioSettingValueList(LIST_VOX, LIST_VOX[
_mem.settings.vox]))
basic.append(vox)
voxs = RadioSetting("settings.voxs", "Vox sensitivity",
RadioSettingValueList(LIST_MLNHM, LIST_MLNHM[
_mem.settings.voxs]))
basic.append(voxs)
# B08 (per channel)
# Display: C01-C06
display = RadioSetting("settings.display", "Display select",
RadioSettingValueList(LIST_DISPLAY,
LIST_DISPLAY[_mem.settings.display]))
basic.append(display)
lcdb = RadioSetting("settings.lcdb", "LCD brightness",
RadioSettingValueList(LIST_MINMAX, LIST_MINMAX[
_mem.settings.lcdb]))
basic.append(lcdb)
color = RadioSetting("settings.color", "LCD color",
RadioSettingValueList(LIST_COLOR, LIST_COLOR[
_mem.settings.color]))
basic.append(color)
lcdc = RadioSetting("settings.lcdc", "LCD contrast",
RadioSettingValueList(LIST_MINMAX, LIST_MINMAX[
_mem.settings.lcdc]))
basic.append(lcdc)
btime = RadioSetting("settings.btime", "LCD backlight time",
RadioSettingValueList(LIST_BTIME, LIST_BTIME[
_mem.settings.btime]))
basic.append(btime)
keyb = RadioSetting("settings.keyb", "Key brightness",
RadioSettingValueList(LIST_MINMAX, LIST_MINMAX[
_mem.settings.keyb]))
basic.append(keyb)
# Memory: D01-D04
# D01 (per channel)
# D02 (per channel)
mrscan = RadioSetting("settings.mrscan", "Memory scan type",
RadioSettingValueList(LIST_MRSCAN, LIST_MRSCAN[
_mem.settings.mrscan]))
basic.append(mrscan)
# D04 (per channel)
# Scan: E01-E04
dwstop = RadioSetting("settings.dwstop", "Dual watch stop",
RadioSettingValueList(LIST_DWSTOP, LIST_DWSTOP[
_mem.settings.dwstop]))
basic.append(dwstop)
scand = RadioSetting("settings.scand", "Scan direction",
RadioSettingValueList(LIST_SCAND,LIST_SCAND[
_mem.settings.scand]))
basic.append(scand)
scanr = RadioSetting("settings.scanr", "Scan resume",
RadioSettingValueList(LIST_SCANR,LIST_SCANR[
_mem.settings.scanr]))
basic.append(scanr)
scansb = RadioSetting("settings.scansb", "Scan stop beep",
RadioSettingValueBoolean(_mem.settings.scansb))
basic.append(scansb)
# System: F01-F09
apo = RadioSetting("settings.apo", "Automatic power off [hours]",
RadioSettingValueList(LIST_APO, LIST_APO[
_mem.settings.apo]))
basic.append(apo)
ars = RadioSetting("settings.ars", "Automatic repeater shift",
RadioSettingValueBoolean(_mem.settings.ars))
basic.append(ars)
beep = RadioSetting("settings.beep", "Beep volume",
RadioSettingValueList(LIST_BEEP,LIST_BEEP[
_mem.settings.beep]))
basic.append(beep)
fkey = RadioSetting("settings.fkey", "F key",
RadioSettingValueList(LIST_FKEY,LIST_FKEY[
_mem.settings.fkey]))
basic.append(fkey)
pfkey1 = RadioSetting("settings.pfkey1", "Mic P1 key",
RadioSettingValueList(LIST_PFKEY, LIST_PFKEY[
_mem.settings.pfkey1]))
basic.append(pfkey1)
pfkey2 = RadioSetting("settings.pfkey2", "Mic P2 key",
RadioSettingValueList(LIST_PFKEY, LIST_PFKEY[
_mem.settings.pfkey2]))
basic.append(pfkey2)
pfkey3 = RadioSetting("settings.pfkey3", "Mic P3 key",
RadioSettingValueList(LIST_PFKEY, LIST_PFKEY[
_mem.settings.pfkey3]))
basic.append(pfkey3)
pfkey4 = RadioSetting("settings.pfkey4", "Mic P4 key",
RadioSettingValueList(LIST_PFKEY, LIST_PFKEY[
_mem.settings.pfkey4]))
basic.append(pfkey4)
omode = RadioSetting("settings.omode", "Operation mode",
RadioSettingValueList(LIST_AB,LIST_AB[
_mem.settings.omode]))
basic.append(omode)
rxcoverm = RadioSetting("settings.rxcoverm", "RX coverage - memory",
RadioSettingValueList(LIST_COVERAGE,
LIST_COVERAGE[_mem.settings.rxcoverm]))
basic.append(rxcoverm)
rxcoverv = RadioSetting("settings.rxcoverv", "RX coverage - VFO",
RadioSettingValueList(LIST_COVERAGE,
LIST_COVERAGE[_mem.settings.rxcoverv]))
basic.append(rxcoverv)
tot = RadioSetting("settings.tot", "Time out timer [min]",
RadioSettingValueList(LIST_TOT, LIST_TOT[
_mem.settings.tot]))
basic.append(tot)
# Timer/Clock: G01-G04
# G01
datefmt = RadioSetting("settings.datefmt", "Date format",
RadioSettingValueList(LIST_DATEFMT,
LIST_DATEFMT[_mem.settings.datefmt]))
basic.append(datefmt)
timefmt = RadioSetting("settings.timefmt", "Time format",
RadioSettingValueList(LIST_TIMEFMT,
LIST_TIMEFMT[_mem.settings.timefmt]))
basic.append(timefmt)
timesig = RadioSetting("settings.timesig", "Time signal",
RadioSettingValueBoolean(_mem.settings.timesig))
basic.append(timesig)
tz = RadioSetting("settings.tz", "Time zone",
RadioSettingValueList(LIST_TZ, LIST_TZ[
_mem.settings.tz]))
basic.append(tz)
# Signaling: H01-H06
bell = RadioSetting("settings.bell", "Bell ringer",
RadioSettingValueList(LIST_BELL, LIST_BELL[
_mem.settings.bell]))
basic.append(bell)
# H02 (per channel)
dtmfmodenc = RadioSetting("settings.dtmfmodenc", "DTMF mode encode",
RadioSettingValueBoolean(
_mem.settings.dtmfmodenc))
basic.append(dtmfmodenc)
dtmfmoddec = RadioSetting("settings.dtmfmoddec", "DTMF mode decode",
RadioSettingValueBoolean(
_mem.settings.dtmfmoddec))
basic.append(dtmfmoddec)
# H04 (per channel)
decbandsel = RadioSetting("settings.decbandsel", "DTMF band select",
RadioSettingValueList(LIST_AB,LIST_AB[
_mem.settings.decbandsel]))
basic.append(decbandsel)
sqlexp = RadioSetting("settings.sqlexp", "SQL expansion",
RadioSettingValueBoolean(_mem.settings.sqlexp))
basic.append(sqlexp)
# Pkt: I01-I03
databnd = RadioSetting("settings.databnd", "Packet data band",
RadioSettingValueList(LIST_DATABND,LIST_DATABND[
_mem.settings.databnd]))
basic.append(databnd)
dataspd = RadioSetting("settings.dataspd", "Packet data speed",
RadioSettingValueList(LIST_DATASPD,LIST_DATASPD[
_mem.settings.dataspd]))
basic.append(dataspd)
datasql = RadioSetting("settings.datasql", "Packet data squelch",
RadioSettingValueList(LIST_DATASQL,LIST_DATASQL[
_mem.settings.datasql]))
basic.append(datasql)
# Other
dw = RadioSetting("settings.dw", "Dual watch",
RadioSettingValueBoolean(_mem.settings.dw))
other.append(dw)
cpuclk = RadioSetting("settings.cpuclk", "CPU clock frequency",
RadioSettingValueList(LIST_CPUCLK,LIST_CPUCLK[
_mem.settings.cpuclk]))
other.append(cpuclk)
def _filter(name):
filtered = ""
for char in str(name):
if char in VALID_CHARS:
filtered += char
else:
filtered += " "
return filtered
line16 = RadioSetting("poweron_msg.line16", "Power-on message",
RadioSettingValueString(0, 16, _filter(
_mem.poweron_msg.line16)))
other.append(line16)
line32 = RadioSetting("embedded_msg.line32", "Embedded message",
RadioSettingValueString(0, 32, _filter(
_mem.embedded_msg.line32)))
other.append(line32)
# Work
workmoda = RadioSetting("settings.workmoda", "Work mode A",
RadioSettingValueList(LIST_WORK,LIST_WORK[
_mem.settings.workmoda]))
work.append(workmoda)
workmodb = RadioSetting("settings.workmodb", "Work mode B",
RadioSettingValueList(LIST_WORK,LIST_WORK[
_mem.settings.workmodb]))
work.append(workmodb)
wbanda = RadioSetting("settings.wbanda", "Work band A",
RadioSettingValueList(LIST_WBANDA, LIST_WBANDA[
(_mem.settings.wbanda) - 1]))
work.append(wbanda)
wbandb = RadioSetting("settings.wbandb", "Work band B",
RadioSettingValueList(LIST_WBANDB, LIST_WBANDB[
(_mem.settings.wbandb) - 4]))
work.append(wbandb)
sqla = RadioSetting("settings.sqla", "Squelch A",
RadioSettingValueList(LIST_SQL, LIST_SQL[
_mem.settings.sqla]))
work.append(sqla)
sqlb = RadioSetting("settings.sqlb", "Squelch B",
RadioSettingValueList(LIST_SQL, LIST_SQL[
_mem.settings.sqlb]))
work.append(sqlb)
stepa = RadioSetting("settings.stepa", "Auto step A",
RadioSettingValueList(LIST_STEP,LIST_STEP[
_mem.settings.stepa]))
work.append(stepa)
stepb = RadioSetting("settings.stepb", "Auto step B",
RadioSettingValueList(LIST_STEP,LIST_STEP[
_mem.settings.stepb]))
work.append(stepb)
mrcha = RadioSetting("settings.mrcha", "Current channel A",
RadioSettingValueInteger(0, 499,
_mem.settings.mrcha))
work.append(mrcha)
mrchb = RadioSetting("settings.mrchb", "Current channel B",
RadioSettingValueInteger(0, 499,
_mem.settings.mrchb))
work.append(mrchb)
val = _mem.settings.offseta / 100.00
offseta = RadioSetting("settings.offseta", "Offset A (0-37.95)",
RadioSettingValueFloat(0, 38.00, val, 0.05, 2))
work.append(offseta)
val = _mem.settings.offsetb / 100.00
offsetb = RadioSetting("settings.offsetb", "Offset B (0-79.95)",
RadioSettingValueFloat(0, 80.00, val, 0.05, 2))
work.append(offsetb)
wpricha = RadioSetting("settings.wpricha", "Priority channel A",
RadioSettingValueInteger(0, 499,
_mem.settings.wpricha))
work.append(wpricha)
wprichb = RadioSetting("settings.wprichb", "Priority channel B",
RadioSettingValueInteger(0, 499,
_mem.settings.wprichb))
work.append(wprichb)
smode = RadioSetting("settings.smode", "Smart function mode",
RadioSettingValueList(LIST_SMODE,LIST_SMODE[
_mem.settings.smode]))
work.append(smode)
# dtmf
ttdkey = RadioSetting("dtmf.ttdkey", "D key function",
RadioSettingValueList(LIST_TTDKEY, LIST_TTDKEY[
_mem.dtmf.ttdkey]))
dtmf.append(ttdkey)
ttdgt = RadioSetting("dtmf.ttdgt", "Digit time",
RadioSettingValueList(LIST_TT200, LIST_TT200[
(_mem.dtmf.ttdgt) - 5]))
dtmf.append(ttdgt)
ttint = RadioSetting("dtmf.ttint", "Interval time",
RadioSettingValueList(LIST_TT200, LIST_TT200[
(_mem.dtmf.ttint) - 5]))
dtmf.append(ttint)
tt1stdgt = RadioSetting("dtmf.tt1stdgt", "1st digit time",
RadioSettingValueList(LIST_TT200, LIST_TT200[
(_mem.dtmf.tt1stdgt) - 5]))
dtmf.append(tt1stdgt)
tt1stdly = RadioSetting("dtmf.tt1stdly", "1st digit delay time",
RadioSettingValueList(LIST_TT1000, LIST_TT1000[
(_mem.dtmf.tt1stdly) - 2]))
dtmf.append(tt1stdly)
ttdlyqt = RadioSetting("dtmf.ttdlyqt", "Digit delay when use qt",
RadioSettingValueList(LIST_TT1000, LIST_TT1000[
(_mem.dtmf.ttdlyqt) - 2]))
dtmf.append(ttdlyqt)
ttsig = RadioSetting("dtmf2.ttsig", "Signal",
RadioSettingValueList(LIST_TTSIG, LIST_TTSIG[
_mem.dtmf2.ttsig]))
dtmf.append(ttsig)
ttautorst = RadioSetting("dtmf2.ttautorst", "Auto reset time",
RadioSettingValueList(LIST_TTAUTORST,
LIST_TTAUTORST[_mem.dtmf2.ttautorst]))
dtmf.append(ttautorst)
if _mem.dtmf2.ttgrpcode > 0x06:
val = 0x00
else:
val = _mem.dtmf2.ttgrpcode
ttgrpcode = RadioSetting("dtmf2.ttgrpcode", "Group code",
RadioSettingValueList(LIST_TTGRPCODE,
LIST_TTGRPCODE[val]))
dtmf.append(ttgrpcode)
ttintcode = RadioSetting("dtmf2.ttintcode", "Interval code",
RadioSettingValueList(LIST_TTINTCODE,
LIST_TTINTCODE[_mem.dtmf2.ttintcode]))
dtmf.append(ttintcode)
if _mem.dtmf2.ttalert > 0x04:
val = 0x00
else:
val = _mem.dtmf2.ttalert
ttalert = RadioSetting("dtmf2.ttalert", "Alert tone/transpond",
RadioSettingValueList(LIST_TTALERT,
LIST_TTALERT[val]))
dtmf.append(ttalert)
ttautod = RadioSetting("dtmf.ttautod", "Auto dial group",
RadioSettingValueList(LIST_TTAUTOD,
LIST_TTAUTOD[_mem.dtmf.ttautod]))
dtmf.append(ttautod)
# setup 9 dtmf autodial entries
for i in map(str, range(1, 10)):
objname = "code" + i
strname = "Code " + str(i)
dtmfsetting = getattr(_mem.dtmfcode, objname)
dtmflen = getattr(_mem.dtmfcode, objname + "_len")
dtmfstr = self._bbcd2dtmf(dtmfsetting, dtmflen)
code = RadioSettingValueString(0, 16, dtmfstr)
code.set_charset(DTMF_CHARS + list(" "))
rs = RadioSetting("dtmfcode." + objname, strname, code)
dtmf.append(rs)
return top
def get_settings(self):
"""Translate the bit in the mem_struct into settings in the UI"""
_mem = self._memobj
basic = RadioSettingGroup("basic", "Basic Settings")
advanced = RadioSettingGroup("advanced", "Advanced Settings")
top = RadioSettings(
basic,
advanced,
)
# Basic settings
rs = RadioSetting("settings.beep", "Beep",
RadioSettingValueBoolean(_mem.settings.beep))
basic.append(rs)
if _mem.settings.squelcha > 0x09:
val = 0x00
else:
val = _mem.settings.squelcha
rs = RadioSetting(
"squelcha", "Squelch Level A",
RadioSettingValueInteger(0, 9, _mem.settings.squelcha))
basic.append(rs)
if _mem.settings.squelchb > 0x09:
val = 0x00
else:
val = _mem.settings.squelchb
rs = RadioSetting(
"squelchb", "Squelch Level B",
RadioSettingValueInteger(0, 9, _mem.settings.squelchb))
basic.append(rs)
if _mem.settings.voice > 0x02:
val = 0x01
else:
val = _mem.settings.voice
rs = RadioSetting("settings.voice", "Voice Prompt",
RadioSettingValueList(LIST_VOICE, LIST_VOICE[val]))
basic.append(rs)
if _mem.settings.vox > 0x0A:
val = 0x00
else:
val = _mem.settings.vox
rs = RadioSetting(
"settings.vox", "VOX",
RadioSettingValueList(LIST_OFF1TO10, LIST_OFF1TO10[val]))
basic.append(rs)
rs = RadioSetting("settings.autolk", "Automatic Key Lock",
RadioSettingValueBoolean(_mem.settings.autolk))
basic.append(rs)
if _mem.settings.screv > 0x02:
val = 0x01
else:
val = _mem.settings.screv
rs = RadioSetting("settings.screv", "Scan Resume",
RadioSettingValueList(LIST_RESUME, LIST_RESUME[val]))
basic.append(rs)
if _mem.settings.toa > 0x0A:
val = 0x00
else:
val = _mem.settings.toa
rs = RadioSetting(
"settings.toa", "Time-out Pre-Alert",
RadioSettingValueList(LIST_OFF1TO10, LIST_OFF1TO10[val]))
basic.append(rs)
if _mem.settings.timeout > 0x28:
val = 0x03
else:
val = _mem.settings.timeout
rs = RadioSetting(
"settings.timeout", "Timeout Timer",
RadioSettingValueList(LIST_TIMEOUT, LIST_TIMEOUT[val]))
basic.append(rs)
rs = RadioSetting(
"settings.wtled", "Standby LED Color",
RadioSettingValueList(LIST_COLOR, LIST_COLOR[_mem.settings.wtled]))
basic.append(rs)
rs = RadioSetting(
"settings.rxled", "RX LED Color",
RadioSettingValueList(LIST_COLOR, LIST_COLOR[_mem.settings.rxled]))
basic.append(rs)
rs = RadioSetting(
"settings.txled", "TX LED Color",
RadioSettingValueList(LIST_COLOR, LIST_COLOR[_mem.settings.txled]))
basic.append(rs)
rs = RadioSetting(
"settings.roger", "Roger Beep",
RadioSettingValueList(LIST_ROGER, LIST_ROGER[_mem.settings.roger]))
basic.append(rs)
rs = RadioSetting(
"settings.mdfa", "Display Mode (A)",
RadioSettingValueList(LIST_MODE, LIST_MODE[_mem.settings.mdfa]))
basic.append(rs)
rs = RadioSetting(
"settings.mdfb", "Display Mode (B)",
RadioSettingValueList(LIST_MODE, LIST_MODE[_mem.settings.mdfb]))
basic.append(rs)
rs = RadioSetting(
"settings.pf1", "PF1 Key Assignment",
RadioSettingValueList(LIST_PF1, LIST_PF1[_mem.settings.pf1]))
basic.append(rs)
rs = RadioSetting("settings.tdr", "Dual Watch(TDR)",
RadioSettingValueBoolean(_mem.settings.tdr))
basic.append(rs)
rs = RadioSetting("settings.ani", "ANI",
RadioSettingValueBoolean(_mem.settings.ani))
basic.append(rs)
if _mem.settings.pttdly > 0x0A:
val = 0x00
else:
val = _mem.settings.pttdly
rs = RadioSetting(
"settings.pttdly", "PTT ID Delay",
RadioSettingValueList(LIST_OFF1TO30, LIST_OFF1TO30[val]))
basic.append(rs)
rs = RadioSetting(
"settings.pttid", "When to send PTT ID",
RadioSettingValueList(LIST_PTTID, LIST_PTTID[_mem.settings.pttid]))
basic.append(rs)
rs = RadioSetting(
"settings.dtmfst", "DTMF Sidetone",
RadioSettingValueList(LIST_DTMFST,
LIST_DTMFST[_mem.settings.dtmfst]))
basic.append(rs)
rs = RadioSetting(
"settings.ponmsg", "Power-On Message",
RadioSettingValueList(LIST_PONMSG,
LIST_PONMSG[_mem.settings.ponmsg]))
basic.append(rs)
rs = RadioSetting("settings.dw", "DW",
RadioSettingValueBoolean(_mem.settings.dw))
basic.append(rs)
# Advanced settings
rs = RadioSetting(
"settings.prioritych", "Priority Channel",
RadioSettingValueList(LIST_PRIORITY,
LIST_PRIORITY[_mem.settings.prioritych]))
advanced.append(rs)
rs = RadioSetting(
"settings.vfomr", "Work Mode",
RadioSettingValueList(LIST_WORKMODE,
LIST_WORKMODE[_mem.settings.vfomr]))
advanced.append(rs)
dtmfchars = "0123456789"
_codeobj = _mem.settings.code
_code = "".join([dtmfchars[x] for x in _codeobj if int(x) < 0x1F])
val = RadioSettingValueString(0, 3, _code, False)
val.set_charset(dtmfchars)
rs = RadioSetting("settings.code", "PTT-ID Code", val)
def apply_code(setting, obj):
code = []
for j in range(0, 3):
try:
code.append(dtmfchars.index(str(setting.value)[j]))
except IndexError:
code.append(0xFF)
obj.code = code
rs.set_apply_callback(apply_code, _mem.settings)
advanced.append(rs)
_codeobj = _mem.settings.password
_code = "".join([dtmfchars[x] for x in _codeobj if int(x) < 0x1F])
val = RadioSettingValueString(0, 6, _code, False)
val.set_charset(dtmfchars)
rs = RadioSetting("settings.password", "Control Password", val)
def apply_code(setting, obj):
code = []
for j in range(0, 6):
try:
code.append(dtmfchars.index(str(setting.value)[j]))
except IndexError:
code.append(0xFF)
obj.password = code
rs.set_apply_callback(apply_code, _mem.settings)
advanced.append(rs)
if _mem.settings.tdrab > 0x01:
val = 0x00
else:
val = _mem.settings.tdrab
rs = RadioSetting("settings.tdrab", "Dual Watch TX Priority",
RadioSettingValueList(LIST_AB, LIST_AB[val]))
advanced.append(rs)
rs = RadioSetting("settings.keylk", "Key Lock",
RadioSettingValueBoolean(_mem.settings.keylk))
advanced.append(rs)
rs = RadioSetting("settings.control", "Control Code",
RadioSettingValueBoolean(_mem.settings.control))
advanced.append(rs)
return top
def get_settings(self):
_settings = self._memobj.settings
_dtmf_strings = self._memobj.dtmf_strings
_passwd = self._memobj.passwd
repeater = RadioSettingGroup("repeater", "Repeater Settings")
ctcss = RadioSettingGroup("ctcss", "CTCSS/DCS/EPCS Settings")
arts = RadioSettingGroup("arts", "ARTS Settings")
mbls = RadioSettingGroup("banks", "Memory Settings")
scan = RadioSettingGroup("scan", "Scan Settings")
dtmf = RadioSettingGroup("dtmf", "DTMF Settings")
wires = RadioSettingGroup("wires", "WiRES(tm) Settings")
switch = RadioSettingGroup("switch", "Switch/Knob Settings")
disp = RadioSettingGroup("disp", "Display Settings")
misc = RadioSettingGroup("misc", "Miscellaneous Settings")
setmode = RadioSettings(repeater, ctcss, arts, mbls, scan,
dtmf, wires, switch, disp, misc)
# numbers and names of settings refer to the way they're
# presented in the set menu, as well as the list starting on
# page 74 of the manual
# 1 APO
opts = ["Off", "30 Min", "1 Hour", "3 Hour", "5 Hour", "8 Hour"]
misc.append(
RadioSetting(
"apo", "Automatic Power Off",
RadioSettingValueList(opts, opts[_settings.apo])))
# 2 AR.BEP
opts = ["Off", "In Range", "Always"]
arts.append(
RadioSetting(
"arts_beep", "ARTS Beep",
RadioSettingValueList(opts, opts[_settings.arts_beep])))
# 3 AR.INT
opts = ["15 Sec", "25 Sec"]
arts.append(
RadioSetting(
"arts_interval", "ARTS Polling Interval",
RadioSettingValueList(opts, opts[_settings.arts_interval])))
# 4 ARS
opts = ["Off", "On"]
repeater.append(
RadioSetting(
"ars", "Automatic Repeater Shift",
RadioSettingValueList(opts, opts[_settings.ars])))
# 5 BCLO
opts = ["Off", "On"]
misc.append(RadioSetting(
"busy_lockout", "Busy Channel Lock-Out",
RadioSettingValueList(opts, opts[_settings.busy_lockout])))
# 6 BEEP
opts = ["Off", "Key+Scan", "Key"]
switch.append(RadioSetting(
"beep", "Enable the Beeper",
RadioSettingValueList(opts, opts[_settings.beep])))
# 7 BELL
opts = ["Off", "1", "3", "5", "8", "Continuous"]
ctcss.append(RadioSetting("bell", "Bell Repetitions",
RadioSettingValueList(opts, opts[_settings.bell])))
# 8 BNK.LNK
for i in range(0, 8):
opts = ["Off", "On"]
mbs = (self._memobj.mbs >> i) & 1
rs = RadioSetting("mbs%i" % i, "Bank %s Scan" % (i + 1),
RadioSettingValueList(opts, opts[mbs]))
def apply_mbs(s, index):
if int(s.value):
self._memobj.mbs |= (1 << index)
else:
self._memobj.mbs &= ~(1 << index)
rs.set_apply_callback(apply_mbs, i)
mbls.append(rs)
# 9 BNK.NM - A per-bank attribute, nothing to do here.
# 10 CLK.SFT - A per-channel attribute, nothing to do here.
# 11 CW.ID
opts = ["Off", "On"]
arts.append(RadioSetting("cw_id", "CW ID Enable",
RadioSettingValueList(opts, opts[_settings.cw_id])))
cw_id_text = ""
for i in _settings.cw_id_string:
try:
cw_id_text += CHARSET[i & 0x7F]
except IndexError:
if i != 0xff:
LOG.debug("unknown char index in cw id: %x " % (i))
val = RadioSettingValueString(0, 16, cw_id_text, True)
val.set_charset(CHARSET + "abcdefghijklmnopqrstuvwxyz")
rs = RadioSetting("cw_id_string", "CW Identifier Text", val)
def apply_cw_id(s):
str = s.value.get_value().upper().rstrip()
mval = ""
mval = [chr(CHARSET.index(x)) for x in str]
for x in range(len(mval), 16):
mval.append(chr(0xff))
for x in range(0, 16):
_settings.cw_id_string[x] = ord(mval[x])
rs.set_apply_callback(apply_cw_id)
arts.append(rs)
# 12 CWTRNG
opts = ["Off", "4WPM", "5WPM", "6WPM", "7WPM", "8WPM", "9WPM",
"10WPM", "11WPM", "12WPM", "13WPM", "15WPM", "17WPM",
"20WPM", "24WPM", "30WPM", "40WPM"]
misc.append(RadioSetting("cw_trng", "CW Training",
RadioSettingValueList(opts, opts[_settings.cw_trng])))
# todo: make the setting of the units here affect the display
# of the speed. Not critical, but would be slick.
opts = ["CPM", "WPM"]
misc.append(RadioSetting("cw_trng_units", "CW Training Units",
RadioSettingValueList(opts,
opts[_settings.cw_trng_units])))
# 13 DC VLT - a read-only status, so nothing to do here
# 14 DCS CD - A per-channel attribute, nothing to do here
# 15 DCS.RV
opts = ["Disabled", "Enabled"]
ctcss.append(RadioSetting(
"inverted_dcs",
"\"Inverted\" DCS Code Decoding",
RadioSettingValueList(opts,
opts[_settings.inverted_dcs])))
# 16 DIMMER
opts = ["Off"] + ["Level %d" % (x) for x in range(1, 11)]
disp.append(RadioSetting("dimmer", "Dimmer",
RadioSettingValueList(opts,
opts[_settings
.dimmer])))
# 17 DT.A/M
opts = ["Manual", "Auto"]
dtmf.append(RadioSetting("dtmf_mode", "DTMF Autodialer",
RadioSettingValueList(opts,
opts[_settings
.dtmf_mode])))
# 18 DT.DLY
opts = ["50 ms", "250 ms", "450 ms", "750 ms", "1000 ms"]
dtmf.append(RadioSetting("dtmf_delay", "DTMF Autodialer Delay Time",
RadioSettingValueList(opts,
opts[_settings
.dtmf_delay])))
# 19 DT.SET
for memslot in range(0, 10):
dtmf_memory = ""
for i in _dtmf_strings[memslot].dtmf_string:
if i != 0xFF:
try:
dtmf_memory += CHARSET[i]
except IndexError:
LOG.debug("unknown char index in dtmf: %x " % (i))
val = RadioSettingValueString(0, 16, dtmf_memory, True)
val.set_charset(CHARSET + "abcdef")
rs = RadioSetting("dtmf_string_%d" % memslot,
"DTMF Memory %d" % memslot, val)
def apply_dtmf(s, i):
LOG.debug("applying dtmf for %x\n" % i)
str = s.value.get_value().upper().rstrip()
LOG.debug("str is %s\n" % str)
mval = ""
mval = [chr(CHARSET.index(x)) for x in str]
for x in range(len(mval), 16):
mval.append(chr(0xff))
for x in range(0, 16):
_dtmf_strings[i].dtmf_string[x] = ord(mval[x])
rs.set_apply_callback(apply_dtmf, memslot)
dtmf.append(rs)
# 20 DT.SPD
opts = ["50 ms", "100 ms"]
dtmf.append(RadioSetting("dtmf_speed",
"DTMF Autodialer Sending Speed",
RadioSettingValueList(opts,
opts[_settings.
dtmf_speed])))
# 21 EDG.BEP
opts = ["Off", "On"]
mbls.append(RadioSetting("edge_beep", "Band Edge Beeper",
RadioSettingValueList(opts,
opts[_settings.
edge_beep])))
# 22 INT.CD
opts = ["DTMF %X" % (x) for x in range(0, 16)]
wires.append(RadioSetting("int_cd", "Access Number for WiRES(TM)",
RadioSettingValueList(opts, opts[_settings.int_cd])))
# 23 ING MD
opts = ["Sister Radio Group", "Friends Radio Group"]
wires.append(RadioSetting("wires_mode",
"Internet Link Connection Mode",
RadioSettingValueList(opts,
opts[_settings.
wires_mode])))
# 24 INT.A/M
opts = ["Manual", "Auto"]
wires.append(RadioSetting("wires_auto", "Internet Link Autodialer",
RadioSettingValueList(opts,
opts[_settings
.wires_auto])))
# 25 INT.SET
opts = ["F%d" % (x) for x in range(0, 10)]
wires.append(RadioSetting("int_set", "Memory Register for "
"non-WiRES Internet",
RadioSettingValueList(opts,
opts[_settings
.int_set])))
# 26 LOCK
opts = ["Key", "Dial", "Key + Dial", "PTT",
"Key + PTT", "Dial + PTT", "All"]
switch.append(RadioSetting("lock", "Control Locking",
RadioSettingValueList(opts,
opts[_settings
.lock])))
# 27 MCGAIN
opts = ["Level %d" % (x) for x in range(1, 10)]
misc.append(RadioSetting("mic_gain", "Microphone Gain",
RadioSettingValueList(opts,
opts[_settings
.mic_gain])))
# 28 MEM.SCN
opts = ["Tag 1", "Tag 2", "All Channels"]
rs = RadioSetting("scan_mode", "Memory Scan Mode",
RadioSettingValueList(opts,
opts[_settings
.scan_mode - 1]))
# this setting is unusual in that it starts at 1 instead of 0.
# that is, index 1 corresponds to "Tag 1", and index 0 is invalid.
# so we create a custom callback to handle this.
def apply_scan_mode(s):
myopts = ["Tag 1", "Tag 2", "All Channels"]
_settings.scan_mode = myopts.index(s.value.get_value()) + 1
rs.set_apply_callback(apply_scan_mode)
mbls.append(rs)
# 29 MW MD
opts = ["Lower", "Next"]
mbls.append(RadioSetting("mw_mode", "Memory Write Mode",
RadioSettingValueList(opts,
opts[_settings
.mw_mode])))
# 30 NM SET - This is per channel, so nothing to do here
# 31 OPN.MSG
opts = ["Off", "DC Supply Voltage", "Text Message"]
disp.append(RadioSetting("open_msg", "Opening Message Type",
RadioSettingValueList(opts,
opts[_settings.
open_msg])))
openmsg = ""
for i in _settings.openMsg_Text:
try:
openmsg += CHARSET[i & 0x7F]
except IndexError:
if i != 0xff:
LOG.debug("unknown char index in openmsg: %x " % (i))
val = RadioSettingValueString(0, 6, openmsg, True)
val.set_charset(CHARSET + "abcdefghijklmnopqrstuvwxyz")
rs = RadioSetting("openMsg_Text", "Opening Message Text", val)
def apply_openmsg(s):
str = s.value.get_value().upper().rstrip()
mval = ""
mval = [chr(CHARSET.index(x)) for x in str]
for x in range(len(mval), 6):
mval.append(chr(0xff))
for x in range(0, 6):
_settings.openMsg_Text[x] = ord(mval[x])
rs.set_apply_callback(apply_openmsg)
disp.append(rs)
# 32 PAGER - a per-channel attribute
# 33 PAG.ABK
opts = ["Off", "On"]
ctcss.append(RadioSetting("pag_abk", "Paging Answer Back",
RadioSettingValueList(opts,
opts[_settings
.pag_abk])))
# 34 PAG.CDR
opts = ["%2.2d" % (x) for x in range(1, 50)]
ctcss.append(RadioSetting("pag_cdr_1", "Receive Page Code 1",
RadioSettingValueList(opts,
opts[_settings
.pag_cdr_1])))
ctcss.append(RadioSetting("pag_cdr_2", "Receive Page Code 2",
RadioSettingValueList(opts,
opts[_settings
.pag_cdr_2])))
# 35 PAG.CDT
opts = ["%2.2d" % (x) for x in range(1, 50)]
ctcss.append(RadioSetting("pag_cdt_1", "Transmit Page Code 1",
RadioSettingValueList(opts,
opts[_settings
.pag_cdt_1])))
ctcss.append(RadioSetting("pag_cdt_2", "Transmit Page Code 2",
RadioSettingValueList(opts,
opts[_settings
.pag_cdt_2])))
# Common Button Options
button_opts = ["Squelch Off", "Weather", "Smart Search",
"Tone Scan", "Scan", "T Call", "ARTS"]
# 36 PRG P1
opts = button_opts + ["DC Volts"]
switch.append(RadioSetting(
"prog_p1", "P1 Button",
RadioSettingValueList(opts, opts[_settings.prog_p1])))
# 37 PRG P2
opts = button_opts + ["Dimmer"]
switch.append(RadioSetting(
"prog_p2", "P2 Button",
RadioSettingValueList(opts, opts[_settings.prog_p2])))
# 38 PRG P3
opts = button_opts + ["Mic Gain"]
switch.append(RadioSetting(
"prog_p3", "P3 Button",
RadioSettingValueList(opts, opts[_settings.prog_p3])))
# 39 PRG P4
opts = button_opts + ["Skip"]
switch.append(RadioSetting(
"prog_p4", "P4 Button",
RadioSettingValueList(opts, opts[_settings.prog_p4])))
# 40 PSWD
password = ""
for i in _passwd:
if i != 0xFF:
try:
password += CHARSET[i]
except IndexError:
LOG.debug("unknown char index in password: %x " % (i))
val = RadioSettingValueString(0, 4, password, True)
val.set_charset(CHARSET[0:15] + "abcdef ")
rs = RadioSetting("passwd", "Password", val)
def apply_password(s):
str = s.value.get_value().upper().rstrip()
mval = ""
mval = [chr(CHARSET.index(x)) for x in str]
for x in range(len(mval), 4):
mval.append(chr(0xff))
for x in range(0, 4):
_passwd[x] = ord(mval[x])
rs.set_apply_callback(apply_password)
misc.append(rs)
# 41 RESUME
opts = ["3 Sec", "5 Sec", "10 Sec", "Busy", "Hold"]
scan.append(RadioSetting("resume", "Scan Resume Mode",
RadioSettingValueList(opts, opts[_settings.resume])))
# 42 RF.SQL
opts = ["Off"] + ["S-%d" % (x) for x in range(1, 10)]
misc.append(RadioSetting("rf_sql", "RF Squelch Threshold",
RadioSettingValueList(opts, opts[_settings.rf_sql])))
# 43 RPT - per channel attribute, nothing to do here
# 44 RVRT
opts = ["Off", "On"]
misc.append(RadioSetting("revert", "Priority Revert",
RadioSettingValueList(opts, opts[_settings.revert])))
# 45 S.SRCH
opts = ["Single", "Continuous"]
misc.append(RadioSetting("s_search", "Smart Search Sweep Mode",
RadioSettingValueList(opts, opts[_settings.s_search])))
# 46 SHIFT - per channel setting, nothing to do here
# 47 SKIP = per channel setting, nothing to do here
# 48 SPLIT - per channel attribute, nothing to do here
# 49 SQL.TYP - per channel attribute, nothing to do here
# 50 STEP - per channel attribute, nothing to do here
# 51 TEMP - read-only status, nothing to do here
# 52 TN FRQ - per channel attribute, nothing to do here
# 53 TOT
opts = ["Off", "1 Min", "3 Min", "5 Min", "10 Min"]
misc.append(RadioSetting("tot", "Timeout Timer",
RadioSettingValueList(opts,
opts[_settings.tot])))
# 54 TS MUT
opts = ["Off", "On"]
ctcss.append(RadioSetting("ts_mut", "Tone Search Mute",
RadioSettingValueList(opts,
opts[_settings
.ts_mut])))
# 55 TS SPEED
opts = ["Fast", "Slow"]
ctcss.append(RadioSetting("ts_speed", "Tone Search Scanner Speed",
RadioSettingValueList(opts,
opts[_settings
.ts_speed])))
# 56 VFO.SCN
opts = ["+/- 1MHz", "+/- 2MHz", "+/-5MHz", "All"]
scan.append(RadioSetting("vfo_scan", "VFO Scanner Width",
RadioSettingValueList(opts,
opts[_settings
.vfo_scan])))
# 57 WX.ALT
opts = ["Off", "On"]
misc.append(RadioSetting("wx_alert", "Weather Alert Scan",
RadioSettingValueList(opts, opts[_settings.wx_alert])))
# 58 WX.VOL
opts = ["Normal", "Maximum"]
misc.append(RadioSetting("wx_vol_max", "Weather Alert Volume",
RadioSettingValueList(opts, opts[_settings.wx_vol_max])))
# 59 W/N DV - this is a per-channel attribute, nothing to do here
return setmode
def _get_settings(self):
_settings = self._memobj.settings
basic = RadioSettingGroup("basic", "Basic Settings")
advanced = RadioSettingGroup("advanced", "Advanced Settings")
group = RadioSettings(basic, advanced)
rs = RadioSetting("squelch", "Carrier Squelch Level",
RadioSettingValueInteger(0, 9, _settings.squelch))
basic.append(rs)
rs = RadioSetting("save", "Battery Saver",
RadioSettingValueInteger(0, 4, _settings.save))
basic.append(rs)
rs = RadioSetting("abr", "Backlight",
RadioSettingValueBoolean(_settings.abr))
basic.append(rs)
rs = RadioSetting("tdr", "Dual Watch (BDR)",
RadioSettingValueBoolean(_settings.tdr))
advanced.append(rs)
rs = RadioSetting("tdrab", "Dual Watch TX Priority",
RadioSettingValueList(
uv5r.TDRAB_LIST,
uv5r.TDRAB_LIST[_settings.tdrab]))
advanced.append(rs)
rs = RadioSetting("alarm", "Alarm",
RadioSettingValueBoolean(_settings.alarm))
advanced.append(rs)
rs = RadioSetting("beep", "Beep",
RadioSettingValueBoolean(_settings.beep))
basic.append(rs)
rs = RadioSetting("timeout", "Timeout Timer",
RadioSettingValueList(
uv5r.TIMEOUT_LIST,
uv5r.TIMEOUT_LIST[_settings.timeout]))
basic.append(rs)
rs = RadioSetting("screv", "Scan Resume",
RadioSettingValueList(
uv5r.RESUME_LIST,
uv5r.RESUME_LIST[_settings.screv]))
advanced.append(rs)
rs = RadioSetting("mdfa", "Display Mode (A)",
RadioSettingValueList(
uv5r.MODE_LIST, uv5r.MODE_LIST[_settings.mdfa]))
basic.append(rs)
rs = RadioSetting("mdfb", "Display Mode (B)",
RadioSettingValueList(
uv5r.MODE_LIST, uv5r.MODE_LIST[_settings.mdfb]))
basic.append(rs)
rs = RadioSetting("bcl", "Busy Channel Lockout",
RadioSettingValueBoolean(_settings.bcl))
advanced.append(rs)
rs = RadioSetting("autolk", "Automatic Key Lock",
RadioSettingValueBoolean(_settings.autolk))
advanced.append(rs)
rs = RadioSetting("fmradio", "Broadcast FM Radio",
RadioSettingValueBoolean(_settings.fmradio))
advanced.append(rs)
rs = RadioSetting("wtled", "Standby LED Color",
RadioSettingValueList(
COLOR_LIST, COLOR_LIST[_settings.wtled]))
basic.append(rs)
rs = RadioSetting("rxled", "RX LED Color",
RadioSettingValueList(
COLOR_LIST, COLOR_LIST[_settings.rxled]))
basic.append(rs)
rs = RadioSetting("txled", "TX LED Color",
RadioSettingValueList(
COLOR_LIST, COLOR_LIST[_settings.txled]))
basic.append(rs)
rs = RadioSetting("reset", "RESET Menu",
RadioSettingValueBoolean(_settings.reset))
advanced.append(rs)
rs = RadioSetting("menu", "All Menus",
RadioSettingValueBoolean(_settings.menu))
advanced.append(rs)
if len(self._mmap.get_packed()) == 0x1808:
# Old image, without aux block
return group
other = RadioSettingGroup("other", "Other Settings")
group.append(other)
def _filter(name):
filtered = ""
for char in str(name):
if char in chirp_common.CHARSET_ASCII:
filtered += char
else:
filtered += " "
return filtered
_msg = self._memobj.poweron_msg
rs = RadioSetting("poweron_msg.line1", "Power-On Message 1",
RadioSettingValueString(0, 7, _filter(_msg.line1)))
other.append(rs)
rs = RadioSetting("poweron_msg.line2", "Power-On Message 2",
RadioSettingValueString(0, 7, _filter(_msg.line2)))
other.append(rs)
limit = "limits"
vhf_limit = getattr(self._memobj, limit).vhf
rs = RadioSetting("%s.vhf.lower" % limit, "VHF Lower Limit (MHz)",
RadioSettingValueInteger(
1, 1000, vhf_limit.lower))
other.append(rs)
rs = RadioSetting("%s.vhf.upper" % limit, "VHF Upper Limit (MHz)",
RadioSettingValueInteger(
1, 1000, vhf_limit.upper))
other.append(rs)
rs = RadioSetting("%s.vhf.enable" % limit, "VHF TX Enabled",
RadioSettingValueBoolean(vhf_limit.enable))
other.append(rs)
uhf_limit = getattr(self._memobj, limit).uhf
rs = RadioSetting("%s.uhf.lower" % limit, "UHF Lower Limit (MHz)",
RadioSettingValueInteger(
1, 1000, uhf_limit.lower))
other.append(rs)
rs = RadioSetting("%s.uhf.upper" % limit, "UHF Upper Limit (MHz)",
RadioSettingValueInteger(
1, 1000, uhf_limit.upper))
other.append(rs)
rs = RadioSetting("%s.uhf.enable" % limit, "UHF TX Enabled",
RadioSettingValueBoolean(uhf_limit.enable))
other.append(rs)
workmode = RadioSettingGroup("workmode", "Work Mode Settings")
group.append(workmode)
options = ["A", "B"]
rs = RadioSetting("displayab", "Display Selected",
RadioSettingValueList(
options, options[_settings.displayab]))
workmode.append(rs)
options = ["Frequency", "Channel"]
rs = RadioSetting("workmode", "VFO/MR Mode",
RadioSettingValueList(
options, options[_settings.workmode]))
workmode.append(rs)
rs = RadioSetting("keylock", "Keypad Lock",
RadioSettingValueBoolean(_settings.keylock))
workmode.append(rs)
_mrcna = self._memobj.wmchannel.mrcha
rs = RadioSetting("wmchannel.mrcha", "MR A Channel",
RadioSettingValueInteger(0, 127, _mrcna))
workmode.append(rs)
_mrcnb = self._memobj.wmchannel.mrchb
rs = RadioSetting("wmchannel.mrchb", "MR B Channel",
RadioSettingValueInteger(0, 127, _mrcnb))
workmode.append(rs)
def convert_bytes_to_freq(bytes):
real_freq = 0
for byte in bytes:
real_freq = (real_freq * 10) + byte
return chirp_common.format_freq(real_freq * 10)
def my_validate(value):
value = chirp_common.parse_freq(value)
if 17400000 <= value and value < 40000000:
raise InvalidValueError("Can't be between 174.00000-400.00000")
return chirp_common.format_freq(value)
def apply_freq(setting, obj):
value = chirp_common.parse_freq(str(setting.value)) / 10
obj.band = value >= 40000000
for i in range(7, -1, -1):
obj.freq[i] = value % 10
value /= 10
val1a = RadioSettingValueString(
0, 10, convert_bytes_to_freq(self._memobj.vfoa.freq))
val1a.set_validate_callback(my_validate)
rs = RadioSetting("vfoa.freq", "VFO A Frequency", val1a)
rs.set_apply_callback(apply_freq, self._memobj.vfoa)
workmode.append(rs)
val1b = RadioSettingValueString(
0, 10, convert_bytes_to_freq(self._memobj.vfob.freq))
val1b.set_validate_callback(my_validate)
rs = RadioSetting("vfob.freq", "VFO B Frequency", val1b)
rs.set_apply_callback(apply_freq, self._memobj.vfob)
workmode.append(rs)
options = ["Off", "+", "-"]
rs = RadioSetting("vfoa.sftd", "VFO A Shift",
RadioSettingValueList(
options, options[self._memobj.vfoa.sftd]))
workmode.append(rs)
rs = RadioSetting("vfob.sftd", "VFO B Shift",
RadioSettingValueList(
options, options[self._memobj.vfob.sftd]))
workmode.append(rs)
def convert_bytes_to_offset(bytes):
real_offset = 0
for byte in bytes:
real_offset = (real_offset * 10) + byte
return chirp_common.format_freq(real_offset * 10000)
def apply_offset(setting, obj):
value = chirp_common.parse_freq(str(setting.value)) / 10000
for i in range(3, -1, -1):
obj.offset[i] = value % 10
value /= 10
val1a = RadioSettingValueString(
0, 10, convert_bytes_to_offset(self._memobj.vfoa.offset))
rs = RadioSetting("vfoa.offset", "VFO A Offset (0.00-69.95)", val1a)
rs.set_apply_callback(apply_offset, self._memobj.vfoa)
workmode.append(rs)
val1b = RadioSettingValueString(
0, 10, convert_bytes_to_offset(self._memobj.vfob.offset))
rs = RadioSetting("vfob.offset", "VFO B Offset (0.00-69.95)", val1b)
rs.set_apply_callback(apply_offset, self._memobj.vfob)
workmode.append(rs)
options = ["High", "Low"]
rs = RadioSetting("vfoa.txpower", "VFO A Power",
RadioSettingValueList(
options, options[self._memobj.vfoa.txpower]))
workmode.append(rs)
rs = RadioSetting("vfob.txpower", "VFO B Power",
RadioSettingValueList(
options, options[self._memobj.vfob.txpower]))
workmode.append(rs)
options = ["Wide", "Narrow"]
rs = RadioSetting("vfoa.widenarr", "VFO A Bandwidth",
RadioSettingValueList(
options, options[self._memobj.vfoa.widenarr]))
workmode.append(rs)
rs = RadioSetting("vfob.widenarr", "VFO B Bandwidth",
RadioSettingValueList(
options, options[self._memobj.vfob.widenarr]))
workmode.append(rs)
options = ["%s" % x for x in range(1, 16)]
rs = RadioSetting("vfoa.scode", "VFO A PTT-ID",
RadioSettingValueList(
options, options[self._memobj.vfoa.scode]))
workmode.append(rs)
rs = RadioSetting("vfob.scode", "VFO B PTT-ID",
RadioSettingValueList(
options, options[self._memobj.vfob.scode]))
workmode.append(rs)
rs = RadioSetting("vfoa.step", "VFO A Tuning Step",
RadioSettingValueList(
STEP_LIST, STEP_LIST[self._memobj.vfoa.step]))
workmode.append(rs)
rs = RadioSetting("vfob.step", "VFO B Tuning Step",
RadioSettingValueList(
STEP_LIST, STEP_LIST[self._memobj.vfob.step]))
workmode.append(rs)
fm_preset = RadioSettingGroup("fm_preset", "FM Radio Preset")
group.append(fm_preset)
preset = self._memobj.fm_preset / 10.0 + 87
rs = RadioSetting("fm_preset", "FM Preset(MHz)",
RadioSettingValueFloat(87, 107.5, preset, 0.1, 1))
fm_preset.append(rs)
dtmf = RadioSettingGroup("dtmf", "DTMF Settings")
group.append(dtmf)
dtmfchars = "0123456789 *#ABCD"
for i in range(0, 15):
_codeobj = self._memobj.pttid[i].code
_code = "".join([dtmfchars[x] for x in _codeobj if int(x) < 0x1F])
val = RadioSettingValueString(0, 5, _code, False)
val.set_charset(dtmfchars)
rs = RadioSetting("pttid/%i.code" % i,
"PTT ID Code %i" % (i + 1), val)
def apply_code(setting, obj):
code = []
for j in range(0, 5):
try:
code.append(dtmfchars.index(str(setting.value)[j]))
except IndexError:
code.append(0xFF)
obj.code = code
rs.set_apply_callback(apply_code, self._memobj.pttid[i])
dtmf.append(rs)
_codeobj = self._memobj.ani.code
_code = "".join([dtmfchars[x] for x in _codeobj if int(x) < 0x1F])
val = RadioSettingValueString(0, 5, _code, False)
val.set_charset(dtmfchars)
rs = RadioSetting("ani.code", "ANI Code", val)
def apply_code(setting, obj):
code = []
for j in range(0, 5):
try:
code.append(dtmfchars.index(str(setting.value)[j]))
except IndexError:
code.append(0xFF)
obj.code = code
rs.set_apply_callback(apply_code, self._memobj.ani)
dtmf.append(rs)
options = ["Off", "BOT", "EOT", "Both"]
rs = RadioSetting("ani.aniid", "ANI ID",
RadioSettingValueList(
options, options[self._memobj.ani.aniid]))
dtmf.append(rs)
_codeobj = self._memobj.ani.alarmcode
_code = "".join([dtmfchars[x] for x in _codeobj if int(x) < 0x1F])
val = RadioSettingValueString(0, 5, _code, False)
val.set_charset(dtmfchars)
rs = RadioSetting("ani.alarmcode", "Alarm Code", val)
def apply_code(setting, obj):
alarmcode = []
for j in range(5):
try:
alarmcode.append(dtmfchars.index(str(setting.value)[j]))
except IndexError:
alarmcode.append(0xFF)
obj.alarmcode = alarmcode
rs.set_apply_callback(apply_code, self._memobj.ani)
dtmf.append(rs)
rs = RadioSetting("dtmfst", "DTMF Sidetone",
RadioSettingValueList(
uv5r.DTMFST_LIST,
uv5r.DTMFST_LIST[_settings.dtmfst]))
dtmf.append(rs)
rs = RadioSetting("ani.dtmfon", "DTMF Speed (on)",
RadioSettingValueList(
uv5r.DTMFSPEED_LIST,
uv5r.DTMFSPEED_LIST[self._memobj.ani.dtmfon]))
dtmf.append(rs)
rs = RadioSetting("ani.dtmfoff", "DTMF Speed (off)",
RadioSettingValueList(
uv5r.DTMFSPEED_LIST,
uv5r.DTMFSPEED_LIST[self._memobj.ani.dtmfoff]))
dtmf.append(rs)
return group
def get_settings(self):
_settings = self._memobj.settings
_mem = self._memobj
basic = RadioSettingGroup("basic", "Basic Settings")
dtmf = RadioSettingGroup("dtmf", "DTMF Settings")
top = RadioSettings(basic, dtmf)
if _settings.k1shortp > 5:
val = 4
else:
val = _settings.k1shortp
rs = RadioSetting("k1shortp", "Key 1 Short Press",
RadioSettingValueList(
LIST_SHORT_PRESS,
LIST_SHORT_PRESS[val]))
basic.append(rs)
if _settings.k1longp > 5:
val = 5
else:
val = _settings.k1longp
rs = RadioSetting("k1longp", "Key 1 Long Press",
RadioSettingValueList(
LIST_LONG_PRESS,
LIST_LONG_PRESS[val]))
basic.append(rs)
if _settings.k2shortp > 5:
val = 1
else:
val = _settings.k2shortp
rs = RadioSetting("k2shortp", "Key 2 Short Press",
RadioSettingValueList(
LIST_SHORT_PRESS,
LIST_SHORT_PRESS[val]))
basic.append(rs)
if _settings.k2longp > 5:
val = 3
else:
val = _settings.k2longp
rs = RadioSetting("k2longp", "Key 2 Long Press",
RadioSettingValueList(
LIST_LONG_PRESS,
LIST_LONG_PRESS[val]))
basic.append(rs)
rs = RadioSetting("vox", "VOX",
RadioSettingValueBoolean(not _settings.vox))
basic.append(rs)
if _settings.voxg > 8:
val = 4
else:
val = _settings.voxg + 1
rs = RadioSetting("voxg", "VOX Gain",
RadioSettingValueInteger(1, 9, val))
basic.append(rs)
rs = RadioSetting("voxd", "VOX Delay Time",
RadioSettingValueList(
LIST_VOXDELAY,
LIST_VOXDELAY[_settings.voxd]))
basic.append(rs)
rs = RadioSetting("voxi", "VOX Inhibit on Receive",
RadioSettingValueBoolean(_settings.voxi))
basic.append(rs)
if _settings.squelch > 9:
val = 5
else:
val = _settings.squelch
rs = RadioSetting("squelch", "Squelch Level",
RadioSettingValueInteger(0, 9, val))
basic.append(rs)
if _settings.voice == 3:
val = 1
else:
val = _settings.voice
rs = RadioSetting("voice", "Voice Prompts",
RadioSettingValueList(
LIST_VOICE,
LIST_VOICE[val]))
basic.append(rs)
rs = RadioSetting("tone", "Tone",
RadioSettingValueBoolean(_settings.tone))
basic.append(rs)
rs = RadioSetting("lovoltnotx", "TX Inhibit (when battery < 6 volts)",
RadioSettingValueBoolean(_settings.lovoltnotx))
basic.append(rs)
rs = RadioSetting("hivoltnotx", "TX Inhibit (when battery > 9 volts)",
RadioSettingValueBoolean(_settings.hivoltnotx))
basic.append(rs)
if _settings.tot > 0x28:
val = 6
else:
val = _settings.tot
rs = RadioSetting("tot", "Time-out Timer[s]",
RadioSettingValueList(
LIST_TIMEOUTTIMER,
LIST_TIMEOUTTIMER[val]))
basic.append(rs)
if _settings.save < 3:
val = 0
else:
val = _settings.save - 3
rs = RadioSetting("save", "Battery Saver",
RadioSettingValueList(
LIST_SAVE,
LIST_SAVE[val]))
basic.append(rs)
rs = RadioSetting("ssave", "Super Battery Saver[s]",
RadioSettingValueList(
LIST_SSAVE,
LIST_SSAVE[_settings.ssave]))
basic.append(rs)
rs = RadioSetting("fmradio", "Broadcast FM",
RadioSettingValueBoolean(_settings.fmradio))
basic.append(rs)
if _settings.scanspeed > 8:
val = 4
else:
val = _settings.scanspeed
rs = RadioSetting("scanspeed", "Scan Speed[ms]",
RadioSettingValueList(
LIST_SCANSPEED,
LIST_SCANSPEED[val]))
basic.append(rs)
if _settings.scandelay > 27:
val = 12
else:
val = _settings.scandelay
rs = RadioSetting("scandelay", "Scan Droupout Delay Time[s]",
RadioSettingValueList(
LIST_SCANDELAY,
LIST_SCANDELAY[val]))
basic.append(rs)
if _mem.dtmf.dtmfspd > 11:
val = 2
else:
val = _mem.dtmf.dtmfspd + 4
rs = RadioSetting("dtmf.dtmfspd", "DTMF Speed[digit/s]",
RadioSettingValueInteger(4, 15, val))
dtmf.append(rs)
if _mem.dtmf.digtime > 10:
val = 0
else:
val = _mem.dtmf.digtime
rs = RadioSetting("dtmf.digtime", "1st Digit Time[ms]",
RadioSettingValueList(
LIST_DIGTIME,
LIST_DIGTIME[val]))
dtmf.append(rs)
if _mem.dtmf.digdelay > 9:
val = 0
else:
val = _mem.dtmf.digdelay
rs = RadioSetting("dtmf.digdelay", "1st Digit Delay[ms]",
RadioSettingValueList(
LIST_DIGDELAY,
LIST_DIGDELAY[val]))
dtmf.append(rs)
rs = RadioSetting("dtmf.starhash", "* and # Time[ms]",
RadioSettingValueList(
LIST_STARHASH,
LIST_STARHASH[_mem.dtmf.starhash]))
dtmf.append(rs)
rs = RadioSetting("dtmf.codespace", "Code Space Time[ms]",
RadioSettingValueList(
LIST_CODESPACE,
LIST_CODESPACE[_mem.dtmf.codespace]))
dtmf.append(rs)
rs = RadioSetting("dtmf.sidetone", "DTMF Sidetone",
RadioSettingValueBoolean(_mem.dtmf.sidetone))
dtmf.append(rs)
# setup pttid entries
for i in range(0, 2):
objname = "code" + str(i + 1)
names = ["PTT ID(BOT)", "PTT ID(EOT)"]
strname = str(names[i])
dtmfsetting = getattr(_mem.dtmf, objname)
dtmflen = getattr(_mem.dtmf, objname + "_len")
dtmfstr = self._bbcd2dtmf(dtmfsetting, dtmflen)
code = RadioSettingValueString(0, 16, dtmfstr)
code.set_charset(DTMF_CHARSET + list(" "))
rs = RadioSetting("dtmf." + objname, strname, code)
dtmf.append(rs)
def _filter(name):
filtered = ""
for char in str(name):
if char in NUMERIC_CHARSET:
filtered += char
else:
filtered += " "
return filtered
# setup id code entry
codesetting = getattr(_mem.dtmf, "idcode")
codestr = self._bbcd2num(codesetting, 6)
code = RadioSettingValueString(0, 6, _filter(codestr))
code.set_charset(NUMERIC_CHARSET + list(" "))
rs = RadioSetting("dtmf.idcode", "ID Code", code)
dtmf.append(rs)
if _mem.dtmf.groupcode > 6:
val = 0
else:
val = _mem.dtmf.groupcode
rs = RadioSetting("dtmf.groupcode", "Group Code",
RadioSettingValueList(
LIST_GROUPCODE,
LIST_GROUPCODE[val]))
dtmf.append(rs)
if _mem.dtmf.resettime > 60:
val = 0
else:
val = _mem.dtmf.resettime
rs = RadioSetting("dtmf.resettime", "Auto Reset Time[s]",
RadioSettingValueList(
LIST_RESETTIME,
LIST_RESETTIME[_mem.dtmf.resettime]))
dtmf.append(rs)
rs = RadioSetting("dtmf.txdecode", "TX Decode",
RadioSettingValueBoolean(_mem.dtmf.txdecode))
dtmf.append(rs)
rs = RadioSetting("dtmf.decodeto", "Decode Time Out[ms]",
RadioSettingValueList(
LIST_DECODETO,
LIST_DECODETO[_mem.dtmf.decodeto]))
dtmf.append(rs)
rs = RadioSetting("dtmf.decodetone", "Decode Tone",
RadioSettingValueBoolean(_mem.dtmf.decodetone))
dtmf.append(rs)
rs = RadioSetting("dtmf.resettone", "Reset Tone",
RadioSettingValueBoolean(_mem.dtmf.resettone))
dtmf.append(rs)
rs = RadioSetting("dtmf.stuntype", "Stun Type",
RadioSettingValueList(
LIST_STUNTYPE,
LIST_STUNTYPE[_mem.dtmf.stuntype]))
dtmf.append(rs)
## setup stun entry
objname = "code3"
strname = "Stun Code"
dtmfsetting = getattr(_mem.dtmf, objname)
dtmflen = getattr(_mem.dtmf, objname + "_len")
dtmfstr = self._bbcd2dtmf(dtmfsetting, dtmflen)
code = RadioSettingValueString(0, 10, dtmfstr)
code.set_charset(DTMF_CHARSET + list(" "))
rs = RadioSetting("dtmf." + objname, strname, code)
dtmf.append(rs)
return top
def get_settings(self):
_settings = self._memobj.settings
basic = RadioSettingGroup("basic", "Basic")
dtmf = RadioSettingGroup("dtmf", "DTMF")
arts = RadioSettingGroup("arts", "ARTS")
prog = RadioSettingGroup("prog", "Programmable Buttons")
top = RadioSettings(basic, dtmf, arts, prog)
basic.append(
RadioSetting("priority_revert", "Priority Revert",
RadioSettingValueBoolean(_settings.priority_revert)))
basic.append(
RadioSetting("memory_only", "Memory Only mode",
RadioSettingValueBoolean(_settings.memory_only)))
opts = ["off"] + ["%0.1f" % (t / 60.0) for t in range(30, 750, 30)]
basic.append(
RadioSetting("apo", "APO time (hrs)",
RadioSettingValueList(opts, opts[_settings.apo])))
basic.append(
RadioSetting("beep_scan", "Beep: Scan",
RadioSettingValueBoolean(_settings.beep_scan)))
basic.append(
RadioSetting("beep_edge", "Beep: Edge",
RadioSettingValueBoolean(_settings.beep_edge)))
basic.append(
RadioSetting("beep_key", "Beep: Key",
RadioSettingValueBoolean(_settings.beep_key)))
opts = ["T/RX Normal", "RX Reverse", "TX Reverse", "T/RX Reverse"]
basic.append(
RadioSetting(
"dcs_polarity", "DCS polarity",
RadioSettingValueList(opts, opts[_settings.dcs_polarity])))
opts = ["off", "dim 1", "dim 2", "dim 3"]
basic.append(
RadioSetting("dimmer", "Dimmer",
RadioSettingValueList(opts, opts[_settings.dimmer])))
opts = ["manual", "auto", "1-auto"]
basic.append(
RadioSetting(
"hyper_write", "Hyper Write",
RadioSettingValueList(opts, opts[_settings.hyper_write])))
opts = [
"", "key", "dial", "key+dial", "ptt", "ptt+key", "ptt+dial", "all"
]
basic.append(
RadioSetting("lock", "Lock mode",
RadioSettingValueList(opts, opts[_settings.lock])))
opts = ["MH-42", "MH-48"]
basic.append(
RadioSetting(
"microphone_type", "Microphone Type",
RadioSettingValueList(opts, opts[_settings.microphone_type])))
opts = ["off"] + ["S-%d" % n for n in range(2, 10)] + ["S-Full"]
basic.append(
RadioSetting("rf_sql", "RF Squelch",
RadioSettingValueList(opts, opts[_settings.rf_sql])))
opts = ["time", "hold", "busy"]
basic.append(
RadioSetting(
"scan_resume", "Scan Resume",
RadioSettingValueList(opts, opts[_settings.scan_resume])))
opts = ["single", "continuous"]
basic.append(
RadioSetting(
"smart_search", "Smart Search",
RadioSettingValueList(opts, opts[_settings.smart_search])))
opts = ["off"] + ["%d" % t for t in range(1, 31)]
basic.append(
RadioSetting("tot", "Time-out timer (mins)",
RadioSettingValueList(opts, opts[_settings.tot])))
# dtmf tab
opts = ["50", "100", "250", "450", "750", "1000"]
dtmf.append(
RadioSetting(
"dtmf_delay", "DTMF delay (ms)",
RadioSettingValueList(opts, opts[_settings.dtmf_delay])))
opts = ["50", "75", "100"]
dtmf.append(
RadioSetting(
"dtmf_speed", "DTMF speed (ms)",
RadioSettingValueList(opts, opts[_settings.dtmf_speed])))
for i in range(16):
name = "dtmf%02d" % i
dtmfsetting = self._memobj.dtmf[i]
dtmfstr = ""
for c in dtmfsetting.memory:
if c == 0xFF:
break
if c < len(DTMFCHARSET):
dtmfstr += DTMFCHARSET[c]
LOG.debug(dtmfstr)
dtmfentry = RadioSettingValueString(0, 16, dtmfstr)
dtmfentry.set_charset(DTMFCHARSET + list(" "))
rs = RadioSetting(name, name.upper(), dtmfentry)
dtmf.append(rs)
# arts tab
opts = ["off", "in range", "always"]
arts.append(
RadioSetting(
"arts_mode", "ARTS beep",
RadioSettingValueList(opts, opts[_settings.arts_mode])))
opts = ["15", "25"]
arts.append(
RadioSetting(
"arts_interval", "ARTS interval",
RadioSettingValueList(opts, opts[_settings.arts_interval])))
arts.append(
RadioSetting("arts_cwid_enable", "CW ID",
RadioSettingValueBoolean(_settings.arts_cwid_enable)))
_arts_cwid = self._memobj.arts_cwid
cwid = RadioSettingValueString(
0, 16, self._decode_chars(_arts_cwid.get_value()))
cwid.set_charset(CHARSET)
arts.append(RadioSetting("arts_cwid", "CW ID", cwid))
# prog buttons
opts = ["WX", "Reverse", "Repeater", "SQL Off", "Lock", "Dimmer"]
prog.append(
RadioSetting(
"prog_panel_acc", "Prog Panel - Low(ACC)",
RadioSettingValueList(opts, opts[_settings.prog_panel_acc])))
opts = ["Reverse", "Home"]
prog.append(
RadioSetting(
"prog_tone_vm", "TONE | V/M",
RadioSettingValueList(opts, opts[_settings.prog_tone_vm])))
opts = ["" for n in range(26)] + \
["Priority", "Low", "Tone", "MHz", "Reverse", "Home", "Band",
"VFO/MR", "Scan", "Sql Off", "TCall", "SSCH", "ARTS", "Tone Freq",
"DCSC", "WX", "Repeater"]
prog.append(
RadioSetting("prog_p1", "P1",
RadioSettingValueList(opts, opts[_settings.prog_p1])))
prog.append(
RadioSetting("prog_p2", "P2",
RadioSettingValueList(opts, opts[_settings.prog_p2])))
prog.append(
RadioSetting("prog_p3", "P3",
RadioSettingValueList(opts, opts[_settings.prog_p3])))
prog.append(
RadioSetting("prog_p4", "P4",
RadioSettingValueList(opts, opts[_settings.prog_p4])))
return top
def get_settings(self):
_settings = self._memobj.settings
basic = RadioSettingGroup("basic", "Basic")
dtmf = RadioSettingGroup("dtmf", "DTMF Code & Paging")
arts = RadioSettingGroup("arts", "ARTS")
autodial = RadioSettingGroup("autodial", "AutoDial")
top = RadioSettings(basic, autodial, arts, dtmf)
rs = RadioSetting(
"squelch", "Squelch",
RadioSettingValueInteger(0, 15, _settings.squelch))
basic.append(rs)
rs = RadioSetting(
"keybeep", "Keypad Beep",
RadioSettingValueBoolean(_settings.keybeep))
basic.append(rs)
rs = RadioSetting(
"scnl", "Scan Lamp",
RadioSettingValueBoolean(_settings.scnl))
basic.append(rs)
options = ["off", "30m", "1h", "3h", "5h", "8h"]
rs = RadioSetting(
"apo", "APO time (hrs)",
RadioSettingValueList(options, options[_settings.apo]))
basic.append(rs)
options = ["off", "1m", "2.5m", "5m", "10m"]
rs = RadioSetting(
"timeout", "Time Out Timer",
RadioSettingValueList(options, options[_settings.timeout]))
basic.append(rs)
options = ["key", "dial", "key+dial", "ptt",
"key+ptt", "dial+ptt", "all"]
rs = RadioSetting(
"lock", "Lock mode",
RadioSettingValueList(options, options[_settings.lock]))
basic.append(rs)
options = ["off", "0.2", "0.3", "0.5", "1.0", "2.0"]
rs = RadioSetting(
"rxsave", "RX Save (sec)",
RadioSettingValueList(options, options[_settings.rxsave]))
basic.append(rs)
options = ["5sec", "key", "tgl"]
rs = RadioSetting(
"lamp", "Lamp mode",
RadioSettingValueList(options, options[_settings.lamp]))
basic.append(rs)
options = ["off", "1", "3", "5", "8", "rpt"]
rs = RadioSetting(
"bell", "Bell Repetitions",
RadioSettingValueList(options, options[_settings.bell]))
basic.append(rs)
rs = RadioSetting(
"cwid_en", "CWID Enable",
RadioSettingValueBoolean(_settings.cwid_en))
arts.append(rs)
cwid = RadioSettingValueString(
0, 16, self._decode_cwid(_settings.cwid.get_value()))
cwid.set_charset(CHARSET)
rs = RadioSetting("cwid", "CWID", cwid)
arts.append(rs)
options = ["off", "rx", "tx", "trx"]
rs = RadioSetting(
"artsmode", "ARTS Mode",
RadioSettingValueList(
options, options[_settings.artsmode]))
arts.append(rs)
options = ["off", "in range", "always"]
rs = RadioSetting(
"artsbeep", "ARTS Beep",
RadioSettingValueList(options, options[_settings.artsbeep]))
arts.append(rs)
for i in range(0, 8):
dialsettings = _settings.autodial[i]
dialstr = ""
for c in dialsettings.digits:
if c < len(DTMFCHARSET):
dialstr += DTMFCHARSET[c]
dialentry = RadioSettingValueString(0, 16, dialstr)
dialentry.set_charset(DTMFCHARSET + list(" "))
rs = RadioSetting("autodial" + str(i+1),
"AutoDial " + str(i+1), dialentry)
autodial.append(rs)
dialstr = ""
for c in _settings.autodial9_ro.digits:
if c < len(DTMFCHARSET):
dialstr += DTMFCHARSET[c]
dialentry = RadioSettingValueString(0, 32, dialstr)
dialentry.set_mutable(False)
rs = RadioSetting("autodial9_ro", "AutoDial 9 (read only)", dialentry)
autodial.append(rs)
options = ["50ms", "100ms"]
rs = RadioSetting(
"pagingspeed", "Paging Speed",
RadioSettingValueList(options, options[_settings.pagingspeed]))
dtmf.append(rs)
options = ["250ms", "450ms", "750ms", "1000ms"]
rs = RadioSetting(
"pagingdelay", "Paging Delay",
RadioSettingValueList(options, options[_settings.pagingdelay]))
dtmf.append(rs)
options = ["off", "1", "3", "5", "8", "rpt"]
rs = RadioSetting(
"pagingbell", "Paging Bell Repetitions",
RadioSettingValueList(options, options[_settings.pagingbell]))
dtmf.append(rs)
options = ["off", "ans", "for"]
rs = RadioSetting(
"paginganswer", "Paging Answerback",
RadioSettingValueList(options,
options[_settings.paginganswer]))
dtmf.append(rs)
rs = RadioSetting(
"code_dec_c_en", "Paging Code C Decode Enable",
RadioSettingValueBoolean(_settings.code_dec_c_en))
dtmf.append(rs)
_str = str(bitwise.bcd_to_int(_settings.pagingcodec_ro))
code = RadioSettingValueString(0, 3, _str)
code.set_charset(NUMERIC_CHARSET + list(" "))
code.set_mutable(False)
rs = RadioSetting("pagingcodec_ro", "Paging Code C (read only)", code)
dtmf.append(rs)
rs = RadioSetting(
"code_dec_p_en", "Paging Code P Decode Enable",
RadioSettingValueBoolean(_settings.code_dec_p_en))
dtmf.append(rs)
_str = str(bitwise.bcd_to_int(_settings.pagingcodep))
code = RadioSettingValueString(0, 3, _str)
code.set_charset(NUMERIC_CHARSET + list(" "))
rs = RadioSetting("pagingcodep", "Paging Code P", code)
dtmf.append(rs)
for i in range(0, 6):
num = str(i+1)
name = "code_dec_" + num + "_en"
rs = RadioSetting(
name, "Paging Code " + num + " Decode Enable",
RadioSettingValueBoolean(getattr(_settings, name)))
dtmf.append(rs)
_str = str(bitwise.bcd_to_int(_settings.pagingcode[i].digits))
code = RadioSettingValueString(0, 3, _str)
code.set_charset(NUMERIC_CHARSET + list(" "))
rs = RadioSetting("pagingcode" + num, "Paging Code " + num, code)
dtmf.append(rs)
return top
def get_settings(self):
_settings = self._memobj.settings
_mem = self._memobj
basic = RadioSettingGroup("basic", "Basic Settings")
dtmf = RadioSettingGroup("dtmf", "DTMF Settings")
top = RadioSettings(basic, dtmf)
if _settings.k1shortp > 5:
val = 4
else:
val = _settings.k1shortp
rs = RadioSetting(
"k1shortp", "Key 1 Short Press",
RadioSettingValueList(LIST_SHORT_PRESS, LIST_SHORT_PRESS[val]))
basic.append(rs)
if _settings.k1longp > 5:
val = 5
else:
val = _settings.k1longp
rs = RadioSetting(
"k1longp", "Key 1 Long Press",
RadioSettingValueList(LIST_LONG_PRESS, LIST_LONG_PRESS[val]))
basic.append(rs)
if _settings.k2shortp > 5:
val = 1
else:
val = _settings.k2shortp
rs = RadioSetting(
"k2shortp", "Key 2 Short Press",
RadioSettingValueList(LIST_SHORT_PRESS, LIST_SHORT_PRESS[val]))
basic.append(rs)
if _settings.k2longp > 5:
val = 3
else:
val = _settings.k2longp
rs = RadioSetting(
"k2longp", "Key 2 Long Press",
RadioSettingValueList(LIST_LONG_PRESS, LIST_LONG_PRESS[val]))
basic.append(rs)
rs = RadioSetting("vox", "VOX",
RadioSettingValueBoolean(not _settings.vox))
basic.append(rs)
if _settings.voxg > 8:
val = 4
else:
val = _settings.voxg + 1
rs = RadioSetting("voxg", "VOX Gain",
RadioSettingValueInteger(1, 9, val))
basic.append(rs)
rs = RadioSetting(
"voxd", "VOX Delay Time",
RadioSettingValueList(LIST_VOXDELAY,
LIST_VOXDELAY[_settings.voxd]))
basic.append(rs)
rs = RadioSetting("voxi", "VOX Inhibit on Receive",
RadioSettingValueBoolean(_settings.voxi))
basic.append(rs)
if _settings.squelch > 9:
val = 5
else:
val = _settings.squelch
rs = RadioSetting("squelch", "Squelch Level",
RadioSettingValueInteger(0, 9, val))
basic.append(rs)
if _settings.voice == 3:
val = 1
else:
val = _settings.voice
rs = RadioSetting("voice", "Voice Prompts",
RadioSettingValueList(LIST_VOICE, LIST_VOICE[val]))
basic.append(rs)
rs = RadioSetting("tone", "Tone",
RadioSettingValueBoolean(_settings.tone))
basic.append(rs)
rs = RadioSetting("lovoltnotx", "TX Inhibit (when battery < 6 volts)",
RadioSettingValueBoolean(_settings.lovoltnotx))
basic.append(rs)
rs = RadioSetting("hivoltnotx", "TX Inhibit (when battery > 9 volts)",
RadioSettingValueBoolean(_settings.hivoltnotx))
basic.append(rs)
if _settings.tot > 0x28:
val = 6
else:
val = _settings.tot
rs = RadioSetting(
"tot", "Time-out Timer[s]",
RadioSettingValueList(LIST_TIMEOUTTIMER, LIST_TIMEOUTTIMER[val]))
basic.append(rs)
if _settings.save < 3:
val = 0
else:
val = _settings.save - 3
rs = RadioSetting("save", "Battery Saver",
RadioSettingValueList(LIST_SAVE, LIST_SAVE[val]))
basic.append(rs)
rs = RadioSetting(
"ssave", "Super Battery Saver[s]",
RadioSettingValueList(LIST_SSAVE, LIST_SSAVE[_settings.ssave]))
basic.append(rs)
rs = RadioSetting("fmradio", "Broadcast FM",
RadioSettingValueBoolean(_settings.fmradio))
basic.append(rs)
if _settings.scanspeed > 8:
val = 4
else:
val = _settings.scanspeed
rs = RadioSetting(
"scanspeed", "Scan Speed[ms]",
RadioSettingValueList(LIST_SCANSPEED, LIST_SCANSPEED[val]))
basic.append(rs)
if _settings.scandelay > 27:
val = 12
else:
val = _settings.scandelay
rs = RadioSetting(
"scandelay", "Scan Droupout Delay Time[s]",
RadioSettingValueList(LIST_SCANDELAY, LIST_SCANDELAY[val]))
basic.append(rs)
if _mem.dtmf.dtmfspd > 11:
val = 2
else:
val = _mem.dtmf.dtmfspd + 4
rs = RadioSetting("dtmf.dtmfspd", "DTMF Speed[digit/s]",
RadioSettingValueInteger(4, 15, val))
dtmf.append(rs)
if _mem.dtmf.digtime > 10:
val = 0
else:
val = _mem.dtmf.digtime
rs = RadioSetting(
"dtmf.digtime", "1st Digit Time[ms]",
RadioSettingValueList(LIST_DIGTIME, LIST_DIGTIME[val]))
dtmf.append(rs)
if _mem.dtmf.digdelay > 9:
val = 0
else:
val = _mem.dtmf.digdelay
rs = RadioSetting(
"dtmf.digdelay", "1st Digit Delay[ms]",
RadioSettingValueList(LIST_DIGDELAY, LIST_DIGDELAY[val]))
dtmf.append(rs)
rs = RadioSetting(
"dtmf.starhash", "* and # Time[ms]",
RadioSettingValueList(LIST_STARHASH,
LIST_STARHASH[_mem.dtmf.starhash]))
dtmf.append(rs)
rs = RadioSetting(
"dtmf.codespace", "Code Space Time[ms]",
RadioSettingValueList(LIST_CODESPACE,
LIST_CODESPACE[_mem.dtmf.codespace]))
dtmf.append(rs)
rs = RadioSetting("dtmf.sidetone", "DTMF Sidetone",
RadioSettingValueBoolean(_mem.dtmf.sidetone))
dtmf.append(rs)
# setup pttid entries
for i in range(0, 2):
objname = "code" + str(i + 1)
names = ["PTT ID(BOT)", "PTT ID(EOT)"]
strname = str(names[i])
dtmfsetting = getattr(_mem.dtmf, objname)
dtmflen = getattr(_mem.dtmf, objname + "_len")
dtmfstr = self._bbcd2dtmf(dtmfsetting, dtmflen)
code = RadioSettingValueString(0, 16, dtmfstr)
code.set_charset(DTMF_CHARSET + list(" "))
rs = RadioSetting("dtmf." + objname, strname, code)
dtmf.append(rs)
def _filter(name):
filtered = ""
for char in str(name):
if char in NUMERIC_CHARSET:
filtered += char
else:
filtered += " "
return filtered
# setup id code entry
codesetting = getattr(_mem.dtmf, "idcode")
codestr = self._bbcd2num(codesetting, 6)
code = RadioSettingValueString(0, 6, _filter(codestr))
code.set_charset(NUMERIC_CHARSET + list(" "))
rs = RadioSetting("dtmf.idcode", "ID Code", code)
dtmf.append(rs)
if _mem.dtmf.groupcode > 6:
val = 0
else:
val = _mem.dtmf.groupcode
rs = RadioSetting(
"dtmf.groupcode", "Group Code",
RadioSettingValueList(LIST_GROUPCODE, LIST_GROUPCODE[val]))
dtmf.append(rs)
if _mem.dtmf.resettime > 60:
val = 0
else:
val = _mem.dtmf.resettime
rs = RadioSetting(
"dtmf.resettime", "Auto Reset Time[s]",
RadioSettingValueList(LIST_RESETTIME,
LIST_RESETTIME[_mem.dtmf.resettime]))
dtmf.append(rs)
rs = RadioSetting("dtmf.txdecode", "TX Decode",
RadioSettingValueBoolean(_mem.dtmf.txdecode))
dtmf.append(rs)
rs = RadioSetting(
"dtmf.decodeto", "Decode Time Out[ms]",
RadioSettingValueList(LIST_DECODETO,
LIST_DECODETO[_mem.dtmf.decodeto]))
dtmf.append(rs)
rs = RadioSetting("dtmf.decodetone", "Decode Tone",
RadioSettingValueBoolean(_mem.dtmf.decodetone))
dtmf.append(rs)
rs = RadioSetting("dtmf.resettone", "Reset Tone",
RadioSettingValueBoolean(_mem.dtmf.resettone))
dtmf.append(rs)
rs = RadioSetting(
"dtmf.stuntype", "Stun Type",
RadioSettingValueList(LIST_STUNTYPE,
LIST_STUNTYPE[_mem.dtmf.stuntype]))
dtmf.append(rs)
## setup stun entry
objname = "code3"
strname = "Stun Code"
dtmfsetting = getattr(_mem.dtmf, objname)
dtmflen = getattr(_mem.dtmf, objname + "_len")
dtmfstr = self._bbcd2dtmf(dtmfsetting, dtmflen)
code = RadioSettingValueString(0, 10, dtmfstr)
code.set_charset(DTMF_CHARSET + list(" "))
rs = RadioSetting("dtmf." + objname, strname, code)
dtmf.append(rs)
return top
def _get_settings(self):
_ani = self._memobj.ani
_settings = self._memobj.settings
_vfoa = self._memobj.vfoa
_vfob = self._memobj.vfob
_keymaps = self._memobj.keymaps
basic = RadioSettingGroup("basic", "Basic Settings")
advanced = RadioSettingGroup("advanced", "Advanced Settings")
workmode = RadioSettingGroup("workmode", "Work Mode Settings")
keymaps = RadioSettingGroup("keymaps", "KeyMaps")
dtmf = RadioSettingGroup("dtmf", "DTMF Settings")
group = RadioSettings(basic, advanced, workmode, keymaps, dtmf)
rs = RadioSetting("squelch", "Carrier Squelch Level",
RadioSettingValueInteger(0, 5, _settings.squelch))
basic.append(rs)
rs = RadioSetting("battery_saver", "Battery Save",
RadioSettingValueBoolean(_settings.battery_saver))
advanced.append(rs)
rs = RadioSetting(
"vox", "VOX Sensitivity",
RadioSettingValueList(VOX_LIST, VOX_LIST[_settings.vox]))
basic.append(rs)
rs = RadioSetting(
"auto_bl", "Auto Backlight Timeout",
RadioSettingValueList(AUTOBL_LIST, AUTOBL_LIST[_settings.auto_bl]))
advanced.append(rs)
rs = RadioSetting(
"tot", "TX Timeout Timer",
RadioSettingValueList(TOT_LIST, TOT_LIST[_settings.tot]))
basic.append(rs)
rs = RadioSetting("beep", "Beep",
RadioSettingValueBoolean(_settings.beep))
basic.append(rs)
rs = RadioSetting("voice", "Voice",
RadioSettingValueBoolean(_settings.voice))
advanced.append(rs)
rs = RadioSetting(
"language", "Language",
RadioSettingValueList(LANGUAGE_LIST,
LANGUAGE_LIST[_settings.language]))
advanced.append(rs)
rs = RadioSetting(
"mdfa", "Display Mode (A)",
RadioSettingValueList(MODE_LIST, MODE_LIST[_settings.mdfa]))
basic.append(rs)
rs = RadioSetting(
"mdfb", "Display Mode (B)",
RadioSettingValueList(MODE_LIST, MODE_LIST[_settings.mdfb]))
basic.append(rs)
rs = RadioSetting(
"scan_mode", "Scan Mode",
RadioSettingValueList(SCAN_MODE_LIST,
SCAN_MODE_LIST[_settings.scan_mode]))
basic.append(rs)
rs = RadioSetting("bcl", "Busy Channel Lockout",
RadioSettingValueBoolean(_settings.bcl))
advanced.append(rs)
rs = RadioSetting("autolk", "Automatic Key Lock",
RadioSettingValueBoolean(_settings.autolk))
advanced.append(rs)
rs = RadioSetting(
"almod", "Alarm Mode",
RadioSettingValueList(ALMOD_LIST, ALMOD_LIST[_settings.almod]))
advanced.append(rs)
rs = RadioSetting("alsnd", "Alarm Sound",
RadioSettingValueBoolean(_settings.alsnd))
advanced.append(rs)
rs = RadioSetting("ste", "Squelch Tail Eliminate (HT to HT)",
RadioSettingValueBoolean(_settings.ste))
advanced.append(rs)
rs = RadioSetting(
"rpste", "Squelch Tail Eliminate (repeater)",
RadioSettingValueList(RPSTE_LIST, RPSTE_LIST[_settings.rpste]))
advanced.append(rs)
rs = RadioSetting(
"rptrl", "STE Repeater Delay",
RadioSettingValueList(STEDELAY_LIST,
STEDELAY_LIST[_settings.rptrl]))
advanced.append(rs)
rs = RadioSetting("fmradio", "Disable Broadcast FM Radio",
RadioSettingValueBoolean(_settings.fmradio))
advanced.append(rs)
rs = RadioSetting("keylock", "Keypad Lock",
RadioSettingValueBoolean(_settings.keylock))
advanced.append(rs)
rs = RadioSetting(
"voxdelay", "VOX Delay",
RadioSettingValueList(VOX_DELAY_LIST,
VOX_DELAY_LIST[_settings.voxdelay]))
advanced.append(rs)
rs = RadioSetting(
"menu_timeout", "Menu Timeout",
RadioSettingValueList(MENU_TIMEOUT_LIST,
MENU_TIMEOUT_LIST[_settings.menu_timeout]))
advanced.append(rs)
rs = RadioSetting(
"micgain", "Mic Gain",
RadioSettingValueList(MICGAIN_LIST,
MICGAIN_LIST[_settings.micgain]))
advanced.append(rs)
for entry in KEY_FUNCTIONS:
if entry[1] == _keymaps.sidekey:
rs = RadioSetting(
"keymaps.sidekey", "Side Key Short Press",
RadioSettingValueMap(KEY_FUNCTIONS, _keymaps.sidekey))
keymaps.append(rs)
for entry in KEY_FUNCTIONS:
if entry[1] == _keymaps.sidekeyl:
rs = RadioSetting(
"keymaps.sidekeyl", "Side Key Long Press",
RadioSettingValueMap(KEY_FUNCTIONS, _keymaps.sidekeyl))
keymaps.append(rs)
rs = RadioSetting(
"workmodea", "Work Mode (A)",
RadioSettingValueList(WORKMODE_LIST,
WORKMODE_LIST[_settings.workmodea]))
workmode.append(rs)
rs = RadioSetting(
"workmodeb", "Work Mode (B)",
RadioSettingValueList(WORKMODE_LIST,
WORKMODE_LIST[_settings.workmodeb]))
workmode.append(rs)
def convert_bytes_to_freq(bytes):
real_freq = 0
for byte in bytes:
real_freq = (real_freq * 10) + byte
return chirp_common.format_freq(real_freq * 10)
def my_validate(value):
value = chirp_common.parse_freq(value)
if 17400000 <= value and value < 40000000:
msg = ("Can't be between 174.00000-400.00000")
raise InvalidValueError(msg)
return chirp_common.format_freq(value)
def apply_freq(setting, obj):
value = chirp_common.parse_freq(str(setting.value)) / 10
obj.band = value >= 40000000
for i in range(7, -1, -1):
obj.freq[i] = value % 10
value /= 10
val1a = RadioSettingValueString(0, 10,
convert_bytes_to_freq(_vfoa.freq))
val1a.set_validate_callback(my_validate)
rs = RadioSetting("vfoa.freq", "VFO A Frequency", val1a)
rs.set_apply_callback(apply_freq, _vfoa)
workmode.append(rs)
val1b = RadioSettingValueString(0, 10,
convert_bytes_to_freq(_vfob.freq))
val1b.set_validate_callback(my_validate)
rs = RadioSetting("vfob.freq", "VFO B Frequency", val1b)
rs.set_apply_callback(apply_freq, _vfob)
workmode.append(rs)
rs = RadioSetting(
"vfoa.sftd", "VFO A Shift",
RadioSettingValueList(SHIFTD_LIST, SHIFTD_LIST[_vfoa.sftd]))
workmode.append(rs)
rs = RadioSetting(
"vfob.sftd", "VFO B Shift",
RadioSettingValueList(SHIFTD_LIST, SHIFTD_LIST[_vfob.sftd]))
workmode.append(rs)
def convert_bytes_to_offset(bytes):
real_offset = 0
for byte in bytes:
real_offset = (real_offset * 10) + byte
return chirp_common.format_freq(real_offset * 100)
def apply_offset(setting, obj):
value = chirp_common.parse_freq(str(setting.value)) / 100
for i in range(5, -1, -1):
obj.offset[i] = value % 10
value /= 10
val1a = RadioSettingValueString(0, 10,
convert_bytes_to_offset(_vfoa.offset))
rs = RadioSetting("vfoa.offset", "VFO A Offset (0.0-999.999)", val1a)
rs.set_apply_callback(apply_offset, _vfoa)
workmode.append(rs)
val1b = RadioSettingValueString(0, 10,
convert_bytes_to_offset(_vfob.offset))
rs = RadioSetting("vfob.offset", "VFO B Offset (0.0-999.999)", val1b)
rs.set_apply_callback(apply_offset, _vfob)
workmode.append(rs)
rs = RadioSetting(
"vfoa.txpower", "VFO A Power",
RadioSettingValueList(TXPOWER_LIST, TXPOWER_LIST[_vfoa.txpower]))
workmode.append(rs)
rs = RadioSetting(
"vfob.txpower", "VFO B Power",
RadioSettingValueList(TXPOWER_LIST, TXPOWER_LIST[_vfob.txpower]))
workmode.append(rs)
rs = RadioSetting(
"vfoa.widenarr", "VFO A Bandwidth",
RadioSettingValueList(BANDWIDTH_LIST,
BANDWIDTH_LIST[_vfoa.widenarr]))
workmode.append(rs)
rs = RadioSetting(
"vfob.widenarr", "VFO B Bandwidth",
RadioSettingValueList(BANDWIDTH_LIST,
BANDWIDTH_LIST[_vfob.widenarr]))
workmode.append(rs)
rs = RadioSetting(
"vfoa.scode", "VFO A PTT-ID",
RadioSettingValueList(PTTIDCODE_LIST, PTTIDCODE_LIST[_vfoa.scode]))
workmode.append(rs)
rs = RadioSetting(
"vfob.scode", "VFO B PTT-ID",
RadioSettingValueList(PTTIDCODE_LIST, PTTIDCODE_LIST[_vfob.scode]))
workmode.append(rs)
rs = RadioSetting(
"vfoa.step", "VFO A Tuning Step",
RadioSettingValueList(STEP_LIST, STEP_LIST[_vfoa.step]))
workmode.append(rs)
rs = RadioSetting(
"vfob.step", "VFO B Tuning Step",
RadioSettingValueList(STEP_LIST, STEP_LIST[_vfob.step]))
workmode.append(rs)
dtmfchars = "0123456789 *#ABCD"
for i in range(0, 15):
_codeobj = self._memobj.pttid[i].code
_code = "".join([dtmfchars[x] for x in _codeobj if int(x) < 0x1F])
val = RadioSettingValueString(0, 5, _code, False)
val.set_charset(dtmfchars)
rs = RadioSetting("pttid/%i.code" % i, "PTT ID Code %i" % (i + 1),
val)
def apply_code(setting, obj):
code = []
for j in range(0, 5):
try:
code.append(dtmfchars.index(str(setting.value)[j]))
except IndexError:
code.append(0xFF)
obj.code = code
rs.set_apply_callback(apply_code, self._memobj.pttid[i])
dtmf.append(rs)
rs = RadioSetting(
"ani.aniid", "ANI ID",
RadioSettingValueList(PTTID_LIST, PTTID_LIST[_ani.aniid]))
dtmf.append(rs)
_codeobj = self._memobj.ani.code
_code = "".join([dtmfchars[x] for x in _codeobj if int(x) < 0x1F])
val = RadioSettingValueString(0, 5, _code, False)
val.set_charset(dtmfchars)
rs = RadioSetting("ani.code", "ANI Code", val)
def apply_code(setting, obj):
code = []
for j in range(0, 5):
try:
code.append(dtmfchars.index(str(setting.value)[j]))
except IndexError:
code.append(0xFF)
obj.code = code
rs.set_apply_callback(apply_code, _ani)
dtmf.append(rs)
rs = RadioSetting(
"dtmfst", "DTMF Sidetone",
RadioSettingValueList(DTMFST_LIST, DTMFST_LIST[_settings.dtmfst]))
dtmf.append(rs)
if _ani.dtmfon > 0xC3:
val = 0x00
else:
val = _ani.dtmfon
rs = RadioSetting(
"ani.dtmfon", "DTMF Speed (on)",
RadioSettingValueList(DTMFSPEED_LIST, DTMFSPEED_LIST[val]))
dtmf.append(rs)
if _ani.dtmfoff > 0xC3:
val = 0x00
else:
val = _ani.dtmfoff
rs = RadioSetting(
"ani.dtmfoff", "DTMF Speed (off)",
RadioSettingValueList(DTMFSPEED_LIST, DTMFSPEED_LIST[val]))
dtmf.append(rs)
rs = RadioSetting(
"pttlt", "PTT ID Delay",
RadioSettingValueList(PTTLT_LIST, PTTLT_LIST[_settings.pttlt]))
dtmf.append(rs)
return group
def get_settings(self):
_settings = self._memobj.settings
basic = RadioSettingGroup("basic", "Basic")
autodial = RadioSettingGroup("autodial", "AutoDial")
keymaps = RadioSettingGroup("keymaps", "KeyMaps")
top = RadioSettings(basic, keymaps, autodial)
rs = RadioSetting(
"beep", "Beep",
RadioSettingValueBoolean(_settings.beep))
basic.append(rs)
rs = RadioSetting(
"lock", "Lock",
RadioSettingValueBoolean(_settings.lock))
basic.append(rs)
rs = RadioSetting(
"ars", "Auto Repeater Shift",
RadioSettingValueBoolean(_settings.ars))
basic.append(rs)
rs = RadioSetting(
"txpwrsave", "TX Power Save",
RadioSettingValueBoolean(_settings.txpwrsave))
basic.append(rs)
rs = RadioSetting(
"txnarrow", "TX Narrow",
RadioSettingValueBoolean(_settings.txnarrow))
basic.append(rs)
options = ["Off", "S-3", "S-5", "S-Full"]
rs = RadioSetting(
"rfsqlvl", "RF Squelch Level",
RadioSettingValueList(options, options[_settings.rfsqlvl]))
basic.append(rs)
options = ["Off", "Band A", "Band B", "Both"]
rs = RadioSetting(
"pttlock", "PTT Lock",
RadioSettingValueList(options, options[_settings.pttlock]))
basic.append(rs)
rs = RadioSetting(
"cwid_en", "CWID Enable",
RadioSettingValueBoolean(_settings.cwid_en))
basic.append(rs)
cwid = RadioSettingValueString(0, 7, self._decode_cwid(_settings.cwid))
cwid.set_charset(FT90_CWID_CHARS)
rs = RadioSetting("cwid", "CWID", cwid)
basic.append(rs)
options = ["OFF"] + map(str, range(1, 12+1))
rs = RadioSetting(
"apo", "APO time (hrs)",
RadioSettingValueList(options, options[_settings.apo]))
basic.append(rs)
options = ["Off"] + map(str, range(1, 60+1))
rs = RadioSetting(
"tot", "Time Out Timer (mins)",
RadioSettingValueList(options, options[_settings.tot]))
basic.append(rs)
options = ["off", "Auto/TX", "Auto", "TX"]
rs = RadioSetting(
"fancontrol", "Fan Control",
RadioSettingValueList(options, options[_settings.fancontrol]))
basic.append(rs)
keyopts = ["Scan Up", "Scan Down", "Repeater", "Reverse", "Tone Burst",
"Tx Power", "Home Ch", "VFO/MR", "Tone", "Priority"]
rs = RadioSetting(
"key_lt", "Left Key",
RadioSettingValueList(keyopts, keyopts[_settings.key_lt]))
keymaps.append(rs)
rs = RadioSetting(
"key_rt", "Right Key",
RadioSettingValueList(keyopts, keyopts[_settings.key_rt]))
keymaps.append(rs)
rs = RadioSetting(
"key_p1", "P1 Key",
RadioSettingValueList(keyopts, keyopts[_settings.key_p1]))
keymaps.append(rs)
rs = RadioSetting(
"key_p2", "P2 Key",
RadioSettingValueList(keyopts, keyopts[_settings.key_p2]))
keymaps.append(rs)
rs = RadioSetting(
"key_acc", "ACC Key",
RadioSettingValueList(keyopts, keyopts[_settings.key_acc]))
keymaps.append(rs)
options = map(str, range(0, 12+1))
rs = RadioSetting(
"lcdcontrast", "LCD Contrast",
RadioSettingValueList(options, options[_settings.lcdcontrast]))
basic.append(rs)
options = ["off", "d4", "d3", "d2", "d1"]
rs = RadioSetting(
"dimmer", "Dimmer",
RadioSettingValueList(options, options[_settings.dimmer]))
basic.append(rs)
options = ["TRX Normal", "RX Reverse", "TX Reverse", "TRX Reverse"]
rs = RadioSetting(
"dcsmode", "DCS Mode",
RadioSettingValueList(options, options[_settings.dcsmode]))
basic.append(rs)
options = ["50 ms", "100 ms"]
rs = RadioSetting(
"dtmfspeed", "DTMF Speed",
RadioSettingValueList(options, options[_settings.dtmfspeed]))
autodial.append(rs)
options = ["50 ms", "250 ms", "450 ms", "750 ms", "1 sec"]
rs = RadioSetting(
"dtmftxdelay", "DTMF TX Delay",
RadioSettingValueList(options, options[_settings.dtmftxdelay]))
autodial.append(rs)
options = map(str, range(1, 8 + 1))
rs = RadioSetting(
"dtmf_active", "DTMF Active",
RadioSettingValueList(options, options[_settings.dtmf_active]))
autodial.append(rs)
# setup 8 dtmf autodial entries
for i in map(str, range(1, 9)):
objname = "dtmf" + i
dtmfsetting = getattr(_settings, objname)
dtmflen = getattr(_settings, objname + "_len")
dtmfstr = self._bbcd2dtmf(dtmfsetting, dtmflen)
dtmf = RadioSettingValueString(0, 16, dtmfstr)
dtmf.set_charset(FT90_DTMF_CHARS + list(" "))
rs = RadioSetting(objname, objname.upper(), dtmf)
autodial.append(rs)
return top
def get_settings(self):
_settings = self._memobj.settings
basic = RadioSettingGroup("basic", "Basic")
dtmf = RadioSettingGroup("dtmf", "DTMF")
arts = RadioSettingGroup("arts", "ARTS")
top = RadioSettingGroup("top", "All Settings", basic, arts, dtmf)
options = [ "off", "30m", "1h", "3h", "5h", "8h" ]
rs = RadioSetting("apo", "APO time (hrs)",
RadioSettingValueList(options,
options[_settings.apo]))
basic.append(rs)
rs = RadioSetting("ars", "Auto Repeater Shift",
RadioSettingValueBoolean(_settings.ars))
basic.append(rs)
rs = RadioSetting("att", "Attenuation",
RadioSettingValueBoolean(_settings.att))
basic.append(rs)
rs = RadioSetting("bclo", "Busy Channel Lockout",
RadioSettingValueBoolean(_settings.bclo))
basic.append(rs)
rs = RadioSetting("beep", "Beep",
RadioSettingValueBoolean(_settings.beep))
basic.append(rs)
options = [ "off", "1", "3", "5", "8", "cont"]
rs = RadioSetting("bell", "Bell",
RadioSettingValueList(options,
options[_settings.bell]))
basic.append(rs)
rs = RadioSetting("busyled", "Busy LED",
RadioSettingValueBoolean(_settings.busyled))
basic.append(rs)
options = [ "5", "10", "50", "100" ]
rs = RadioSetting("chcounter", "Channel Counter (MHz)",
RadioSettingValueList(options,
options[_settings.chcounter]))
basic.append(rs)
rs = RadioSetting("dcsrev", "DCS Reverse",
RadioSettingValueBoolean(_settings.dcsrev))
basic.append(rs)
options = map(str, range(0,12+1))
rs = RadioSetting("dimmer", "Dimmer",
RadioSettingValueList(options, options[_settings.dimmer]))
basic.append(rs)
rs = RadioSetting("edgebeep", "Edge Beep",
RadioSettingValueBoolean(_settings.edgebeep))
basic.append(rs)
options = [ "beep", "strobe", "bp+str", "beam", "bp+beam", "cw", "bp+cw" ]
rs = RadioSetting("emergmode", "Emergency Mode",
RadioSettingValueList(options,
options[_settings.emergmode]))
basic.append(rs)
options = ["Home", "Reverse"]
rs = RadioSetting("hmrv", "HM/RV key",
RadioSettingValueList(options, options[_settings.hmrv]))
basic.append(rs)
options = ["My Menu", "Internet"]
rs = RadioSetting("internet_key", "Internet key",
RadioSettingValueList(options, options[_settings.internet_key]))
basic.append(rs)
options = ["1 APO","2 AR BEP","3 AR INT","4 ARS","5 ATT","6 BCLO","7 BEEP","8 BELL",
"9 BSYLED","10 CH CNT","11 CK SFT","12 CW ID","13 DC VLT","14 DCS CD","15 DCS RV",
"16 DIMMER","17 DTMF","18 DTMF S","19 EDG BP","20 EMG S","21 HLFDEV","22 HM/RV",
"23 INT MD","24 LAMP","25 LOCK","26 M/T-CL","27 MW MD","28 NAME","29 NM SET",
"30 OPNMSG","31 RESUME","32 RF SQL","33 RPT","34 RX MD","35 RXSAVE","36 S SCH",
"37 SCNLMP","38 SHIFT","39 SKIP","40 SPLIT","41 SQL","42 SQL TYP","43 STEP",
"44 TN FRQ","45 TOT","46 TXSAVE","47 VFO MD", "48 TR SQL (JAPAN)", "48 WX ALT"]
rs = RadioSetting("mymenu", "My Menu function",
RadioSettingValueList(options, options[_settings.mymenu - 9]))
basic.append(rs)
options = ["wires", "link"]
rs = RadioSetting("internet_mode", "Internet mode",
RadioSettingValueList(options, options[_settings.internet_mode]))
basic.append(rs)
options = ["key", "cont", "off"]
rs = RadioSetting("lamp", "Lamp mode",
RadioSettingValueList(options, options[_settings.lamp]))
basic.append(rs)
options = ["key", "dial", "key+dial", "ptt", "key+ptt", "dial+ptt", "all"]
rs = RadioSetting("lock", "Lock mode",
RadioSettingValueList(options, options[_settings.lock]))
basic.append(rs)
options = ["monitor", "tone call"]
rs = RadioSetting("moni_tcall", "MONI key",
RadioSettingValueList(options, options[_settings.moni_tcall]))
basic.append(rs)
options = ["lower", "next"]
rs = RadioSetting("mwmode", "Memory write mode",
RadioSettingValueList(options, options[_settings.mwmode]))
basic.append(rs)
options = map(str, range(0,15+1))
rs = RadioSetting("nfm_sql", "NFM Sql",
RadioSettingValueList(options, options[_settings.nfm_sql]))
basic.append(rs)
options = map(str, range(0,8+1))
rs = RadioSetting("wfm_sql", "WFM Sql",
RadioSettingValueList(options, options[_settings.wfm_sql]))
basic.append(rs)
options = ["off", "dc", "msg"]
rs = RadioSetting("openmsgmode", "Opening message",
RadioSettingValueList(options, options[_settings.openmsgmode]))
basic.append(rs)
openmsg = RadioSettingValueString(0, 6, self._decode_chars(_settings.openmsg.get_value()))
openmsg.set_charset(CHARSET)
rs = RadioSetting("openmsg", "Opening Message", openmsg)
basic.append(rs)
options = ["3s","5s","10s","busy","hold"]
rs = RadioSetting("resume", "Resume",
RadioSettingValueList(options, options[_settings.resume]))
basic.append(rs)
options = ["off"] + map(str,range(1,9+1))
rs = RadioSetting("rfsql", "RF Sql",
RadioSettingValueList(options,options[_settings.rfsql]))
basic.append(rs)
options = ["off","200ms","300ms","500ms","1s","2s"]
rs = RadioSetting("rxsave", "RX pwr save",
RadioSettingValueList(options, options[_settings.rxsave]))
basic.append(rs)
options = ["single","cont"]
rs = RadioSetting("smartsearch", "Smart search",
RadioSettingValueList(options, options[_settings.smartsearch]))
basic.append(rs)
rs = RadioSetting("scan_lamp", "Scan lamp",
RadioSettingValueBoolean(_settings.scan_lamp))
basic.append(rs)
rs = RadioSetting("split", "Split",
RadioSettingValueBoolean(_settings.split))
basic.append(rs)
options = ["off","1","3","5","10"]
rs = RadioSetting("tot", "TOT (mins)",
RadioSettingValueList(options, options[_settings.tot]))
basic.append(rs)
rs = RadioSetting("txsave", "TX pwr save",
RadioSettingValueBoolean(_settings.txsave))
basic.append(rs)
options = ["all", "band"]
rs = RadioSetting("vfomode", "VFO mode",
RadioSettingValueList(options, options[_settings.vfomode]))
basic.append(rs)
rs = RadioSetting("wx_alert", "WX Alert",
RadioSettingValueBoolean(_settings.wx_alert))
basic.append(rs)
#todo: priority channel
#todo: handle WX ch labels
# arts settings (ar beep, ar int, cwid en, cwid field)
options = ["15s", "25s"]
rs = RadioSetting("artsinterval", "ARTS Interval",
RadioSettingValueList(options, options[_settings.artsinterval]))
arts.append(rs)
options = ["off", "in range", "always"]
rs = RadioSetting("artsbeep", "ARTS Beep",
RadioSettingValueList(options, options[_settings.artsbeep]))
arts.append(rs)
rs = RadioSetting("cwid_en", "CWID Enable",
RadioSettingValueBoolean(_settings.cwid_en))
arts.append(rs)
cwid = RadioSettingValueString(0, 16, self._decode_chars(_settings.cwid.get_value()))
cwid.set_charset(CHARSET)
rs = RadioSetting("cwid", "CWID", cwid)
arts.append(rs)
# setup dtmf
options = ["manual", "auto"]
rs = RadioSetting("dtmfmode", "DTMF mode",
RadioSettingValueList(options, options[_settings.dtmfmode]))
dtmf.append(rs)
for i in range(0,8+1):
name = "dtmf" + str(i+1)
dtmfsetting = self._memobj.dtmf[i]
#dtmflen = getattr(_settings, objname + "_len")
dtmfstr = ""
for c in dtmfsetting.digits:
if c < len(DTMFCHARSET):
dtmfstr += DTMFCHARSET[c]
if CHIRP_DEBUG:
print dtmfstr
dtmfentry = RadioSettingValueString(0, 16, dtmfstr)
dtmfentry.set_charset(DTMFCHARSET + list(" "))
rs = RadioSetting(name, name.upper(), dtmfentry)
dtmf.append(rs)
return top
def get_settings(self):
_settings = self._memobj.settings
repeater = RadioSettingGroup("repeater", "Repeater Settings")
ctcss = RadioSettingGroup("ctcss", "CTCSS/DCS/DTMF Settings")
arts = RadioSettingGroup("arts", "ARTS Settings")
scan = RadioSettingGroup("scan", "Scan Settings")
power = RadioSettingGroup("power", "Power Saver Settings")
wires = RadioSettingGroup("wires", "WiRES(tm) Settings")
eai = RadioSettingGroup("eai", "EAI/EPCS Settings")
switch = RadioSettingGroup("switch", "Switch/Knob Settings")
misc = RadioSettingGroup("misc", "Miscellaneous Settings")
mbls = RadioSettingGroup("banks", "Memory Bank Link Scan")
setmode = RadioSettings(repeater, ctcss, arts, scan, power,
wires, eai, switch, misc, mbls)
# APO
opts = ["OFF"] + ["%0.1f" % (x * 0.5) for x in range(1, 24 + 1)]
misc.append(
RadioSetting(
"apo", "Automatic Power Off",
RadioSettingValueList(opts, opts[_settings.apo])))
# AR.BEP
opts = ["OFF", "INRANG", "ALWAYS"]
arts.append(
RadioSetting(
"ar_bep", "ARTS Beep",
RadioSettingValueList(opts, opts[_settings.ar_bep])))
# AR.INT
opts = ["25 SEC", "15 SEC"]
arts.append(
RadioSetting(
"ar_int", "ARTS Polling Interval",
RadioSettingValueList(opts, opts[_settings.ar_int])))
# ARS
opts = ["OFF", "ON"]
repeater.append(
RadioSetting(
"ars", "Automatic Repeater Shift",
RadioSettingValueList(opts, opts[_settings.ars])))
# BCLO
opts = ["OFF", "ON"]
misc.append(RadioSetting(
"bclo", "Busy Channel Lock-Out",
RadioSettingValueList(opts, opts[_settings.bclo])))
# BEEP
opts = ["OFF", "KEY", "KEY+SC"]
rs = RadioSetting(
"beep_key", "Enable the Beeper",
RadioSettingValueList(
opts, opts[_settings.beep_key + _settings.beep_sc]))
def apply_beep(s, obj):
setattr(obj, "beep_key",
(int(s.value) & 1) or ((int(s.value) >> 1) & 1))
setattr(obj, "beep_sc", (int(s.value) >> 1) & 1)
rs.set_apply_callback(apply_beep, self._memobj.settings)
switch.append(rs)
# BELL
opts = ["OFF", "1T", "3T", "5T", "8T", "CONT"]
ctcss.append(RadioSetting("bell", "Bell Repetitions",
RadioSettingValueList(opts, opts[
_settings.bell])))
# BSY.LED
opts = ["ON", "OFF"]
misc.append(RadioSetting("bsy_led", "Busy LED",
RadioSettingValueList(opts, opts[
_settings.bsy_led])))
# DCS.NR
opts = ["TR/X N", "RX R", "TX R", "T/RX R"]
ctcss.append(RadioSetting("dcs_nr", "\"Inverted\" DCS Code Decoding",
RadioSettingValueList(opts, opts[
_settings.dcs_nr])))
# DT.DLY
opts = ["50 MS", "100 MS", "250 MS", "450 MS", "750 MS", "1000 MS"]
ctcss.append(RadioSetting("dt_dly", "DTMF Autodialer Delay Time",
RadioSettingValueList(opts, opts[
_settings.dt_dly])))
# DT.SPD
opts = ["50 MS", "100 MS"]
ctcss.append(RadioSetting("dt_spd", "DTMF Autodialer Sending Speed",
RadioSettingValueList(opts, opts[
_settings.dt_spd])))
# DT.WRT
for i in range(0, 9):
dtmf = self._memobj.dtmf[i]
str = ""
for c in dtmf.memory:
if c == 0xFF:
break
if c < len(DTMF_CHARS):
str += DTMF_CHARS[c]
val = RadioSettingValueString(0, 16, str, False)
val.set_charset(DTMF_CHARS + list("abcd"))
rs = RadioSetting("dtmf_%i" % i,
"DTMF Autodialer Memory %i" % (i + 1), val)
def apply_dtmf(s, obj):
str = s.value.get_value().upper().rstrip()
val = [DTMF_CHARS.index(x) for x in str]
for x in range(len(val), 16):
val.append(0xFF)
obj.memory = val
rs.set_apply_callback(apply_dtmf, dtmf)
ctcss.append(rs)
# EDG.BEP
opts = ["OFF", "ON"]
misc.append(RadioSetting("edg_bep", "Band Edge Beeper",
RadioSettingValueList(opts, opts[
_settings.edg_bep])))
# I.NET
opts = ["OFF", "COD", "MEM"]
rs = RadioSetting("inet", "Internet Link Connection",
RadioSettingValueList(
opts, opts[_settings.inet - 1]))
def apply_inet(s, obj):
setattr(obj, s.get_name(), int(s.value) + 1)
rs.set_apply_callback(apply_inet, self._memobj.settings)
wires.append(rs)
# INT.CD
opts = ["CODE 0", "CODE 1", "CODE 2", "CODE 3", "CODE 4",
"CODE 5", "CODE 6", "CODE 7", "CODE 8", "CODE 9",
"CODE A", "CODE B", "CODE C", "CODE D", "CODE E", "CODE F"]
wires.append(RadioSetting("int_cd", "Access Number for WiRES(TM)",
RadioSettingValueList(opts, opts[
_settings.int_cd])))
# INT.MR
opts = ["d1", "d2", "d3", "d4", "d5", "d6", "d7", "d8", "d9"]
wires.append(RadioSetting(
"int_mr", "Access Number (DTMF) for Non-WiRES(TM)",
RadioSettingValueList(opts, opts[_settings.int_mr])))
# LAMP
opts = ["KEY", "5SEC", "TOGGLE"]
switch.append(RadioSetting("lamp", "Lamp Mode",
RadioSettingValueList(opts, opts[
_settings.lamp])))
# LOCK
opts = ["LK KEY", "LKDIAL", "LK K+D", "LK PTT",
"LP P+K", "LK P+D", "LK ALL"]
rs = RadioSetting("lock", "Control Locking",
RadioSettingValueList(
opts, opts[_settings.lock - 1]))
def apply_lock(s, obj):
setattr(obj, s.get_name(), int(s.value) + 1)
rs.set_apply_callback(apply_lock, self._memobj.settings)
switch.append(rs)
# M/T-CL
opts = ["MONI", "T-CALL"]
switch.append(RadioSetting("mt_cl", "MONI Switch Function",
RadioSettingValueList(opts, opts[
_settings.mt_cl])))
# PAG.ABK
opts = ["OFF", "ON"]
eai.append(RadioSetting("pag_abk", "Paging Answer Back",
RadioSettingValueList(opts, opts[
_settings.pag_abk])))
# RESUME
opts = ["TIME", "HOLD", "BUSY"]
scan.append(RadioSetting("resume", "Scan Resume Mode",
RadioSettingValueList(opts, opts[
_settings.resume])))
# REV/HM
opts = ["REV", "HOME"]
switch.append(RadioSetting("rev_hm", "HM/RV Key Function",
RadioSettingValueList(opts, opts[
_settings.rev_hm])))
# RF.SQL
opts = ["OFF", "S-1", "S-2", "S-3", "S-4", "S-5", "S-6",
"S-7", "S-8", "S-FULL"]
misc.append(RadioSetting("rf_sql", "RF Squelch Threshold",
RadioSettingValueList(opts, opts[
_settings.rf_sql])))
# PRI.RVT
opts = ["OFF", "ON"]
scan.append(RadioSetting("pri_rvt", "Priority Revert",
RadioSettingValueList(opts, opts[
_settings.pri_rvt])))
# RXSAVE
opts = ["OFF", "200 MS", "300 MS", "500 MS", "1 S", "2 S"]
power.append(RadioSetting(
"rxsave", "Receive Mode Batery Savery Interval",
RadioSettingValueList(opts, opts[_settings.rxsave])))
# S.SRCH
opts = ["SINGLE", "CONT"]
misc.append(RadioSetting("ssrch", "Smart Search Sweep Mode",
RadioSettingValueList(opts, opts[
_settings.ssrch])))
# SCN.MD
opts = ["MEM", "ONLY"]
scan.append(RadioSetting(
"scn_md", "Memory Scan Channel Selection Mode",
RadioSettingValueList(opts, opts[_settings.scn_md])))
# SCN.LMP
opts = ["OFF", "ON"]
scan.append(RadioSetting("scn_lmp", "Scan Lamp",
RadioSettingValueList(opts, opts[
_settings.scn_lmp])))
# TOT
opts = ["OFF"] + ["%dMIN" % (x) for x in range(1, 30 + 1)]
misc.append(RadioSetting("tot", "Timeout Timer",
RadioSettingValueList(opts, opts[
_settings.tot])))
# TX.LED
opts = ["ON", "OFF"]
misc.append(RadioSetting("tx_led", "TX LED",
RadioSettingValueList(opts, opts[
_settings.tx_led])))
# TXSAVE
opts = ["OFF", "ON"]
power.append(RadioSetting("txsave", "Transmitter Battery Saver",
RadioSettingValueList(opts, opts[
_settings.txsave])))
# VFO.BND
opts = ["BAND", "ALL"]
misc.append(RadioSetting("vfo_bnd", "VFO Band Edge Limiting",
RadioSettingValueList(opts, opts[
_settings.vfo_bnd])))
# WX.ALT
opts = ["OFF", "ON"]
scan.append(RadioSetting("wx_alt", "Weather Alert Scan",
RadioSettingValueList(opts, opts[
_settings.wx_alt])))
# MBS
for i in range(0, 10):
opts = ["OFF", "ON"]
mbs = (self._memobj.mbs >> i) & 1
rs = RadioSetting("mbs%i" % i, "Bank %s Scan" % (i + 1),
RadioSettingValueList(opts, opts[mbs]))
def apply_mbs(s, index):
if int(s.value):
self._memobj.mbs |= (1 << index)
else:
self._memobj.mbs &= ~(1 << index)
rs.set_apply_callback(apply_mbs, i)
mbls.append(rs)
return setmode
def get_settings(self):
"""Translate the bit in the mem_struct into settings in the UI"""
_mem = self._memobj
basic = RadioSettingGroup("basic", "Basic Settings")
advanced = RadioSettingGroup("advanced", "Advanced Settings")
other = RadioSettingGroup("other", "Other Settings")
work = RadioSettingGroup("work", "Work Mode Settings")
fm_preset = RadioSettingGroup("fm_preset", "FM Preset")
dtmfe = RadioSettingGroup("dtmfe", "DTMF Encode Settings")
service = RadioSettingGroup("service", "Service Settings")
top = RadioSettings(basic, advanced, other, work, fm_preset, dtmfe,
service)
# Basic settings
if _mem.settings.squelch > 0x09:
val = 0x00
else:
val = _mem.settings.squelch
rs = RadioSetting("settings.squelch", "Squelch",
RadioSettingValueList(
LIST_OFF1TO9, LIST_OFF1TO9[val]))
basic.append(rs)
if _mem.settings.save > 0x04:
val = 0x00
else:
val = _mem.settings.save
rs = RadioSetting("settings.save", "Battery Saver",
RadioSettingValueList(
LIST_SAVE, LIST_SAVE[val]))
basic.append(rs)
if _mem.settings.vox > 0x0A:
val = 0x00
else:
val = _mem.settings.vox
rs = RadioSetting("settings.vox", "Vox",
RadioSettingValueList(
LIST_OFF1TO10, LIST_OFF1TO10[val]))
basic.append(rs)
if _mem.settings.abr > 0x0A:
val = 0x00
else:
val = _mem.settings.abr
rs = RadioSetting("settings.abr", "Backlight Timeout",
RadioSettingValueList(
LIST_OFF1TO10, LIST_OFF1TO10[val]))
basic.append(rs)
rs = RadioSetting("settings.tdr", "Dual Watch",
RadioSettingValueBoolean(_mem.settings.tdr))
basic.append(rs)
rs = RadioSetting("settings.beep", "Beep",
RadioSettingValueBoolean(_mem.settings.beep))
basic.append(rs)
if _mem.settings.timeout > 0x27:
val = 0x03
else:
val = _mem.settings.timeout
rs = RadioSetting("settings.timeout", "Timeout Timer",
RadioSettingValueList(
LIST_TIMEOUT, LIST_TIMEOUT[val]))
basic.append(rs)
if _mem.settings.voice > 0x02:
val = 0x01
else:
val = _mem.settings.voice
rs = RadioSetting("settings.voice", "Voice Prompt",
RadioSettingValueList(
LIST_VOICE, LIST_VOICE[val]))
basic.append(rs)
rs = RadioSetting("settings.dtmfst", "DTMF Sidetone",
RadioSettingValueList(LIST_DTMFST, LIST_DTMFST[
_mem.settings.dtmfst]))
basic.append(rs)
if _mem.settings.screv > 0x02:
val = 0x01
else:
val = _mem.settings.screv
rs = RadioSetting("settings.screv", "Scan Resume",
RadioSettingValueList(
LIST_RESUME, LIST_RESUME[val]))
basic.append(rs)
rs = RadioSetting("settings.pttid", "When to send PTT ID",
RadioSettingValueList(LIST_PTTID, LIST_PTTID[
_mem.settings.pttid]))
basic.append(rs)
if _mem.settings.pttlt > 0x1E:
val = 0x05
else:
val = _mem.settings.pttlt
rs = RadioSetting("pttlt", "PTT ID Delay",
RadioSettingValueInteger(0, 50, val))
basic.append(rs)
rs = RadioSetting("settings.mdfa", "Display Mode (A)",
RadioSettingValueList(LIST_MODE, LIST_MODE[
_mem.settings.mdfa]))
basic.append(rs)
rs = RadioSetting("settings.mdfb", "Display Mode (B)",
RadioSettingValueList(LIST_MODE, LIST_MODE[
_mem.settings.mdfb]))
basic.append(rs)
rs = RadioSetting("settings.autolk", "Automatic Key Lock",
RadioSettingValueBoolean(_mem.settings.autolk))
basic.append(rs)
rs = RadioSetting("settings.wtled", "Standby LED Color",
RadioSettingValueList(
LIST_COLOR, LIST_COLOR[_mem.settings.wtled]))
basic.append(rs)
rs = RadioSetting("settings.rxled", "RX LED Color",
RadioSettingValueList(
LIST_COLOR, LIST_COLOR[_mem.settings.rxled]))
basic.append(rs)
rs = RadioSetting("settings.txled", "TX LED Color",
RadioSettingValueList(
LIST_COLOR, LIST_COLOR[_mem.settings.txled]))
basic.append(rs)
val = _mem.settings.almod
rs = RadioSetting("settings.almod", "Alarm Mode",
RadioSettingValueList(
LIST_ALMOD, LIST_ALMOD[val]))
basic.append(rs)
if _mem.settings.tdrab > 0x02:
val = 0x00
else:
val = _mem.settings.tdrab
rs = RadioSetting("settings.tdrab", "Dual Watch TX Priority",
RadioSettingValueList(
LIST_OFFAB, LIST_OFFAB[val]))
basic.append(rs)
rs = RadioSetting("settings.ste", "Squelch Tail Eliminate (HT to HT)",
RadioSettingValueBoolean(_mem.settings.ste))
basic.append(rs)
if _mem.settings.rpste > 0x0A:
val = 0x00
else:
val = _mem.settings.rpste
rs = RadioSetting("settings.rpste",
"Squelch Tail Eliminate (repeater)",
RadioSettingValueList(
LIST_RPSTE, LIST_RPSTE[val]))
basic.append(rs)
if _mem.settings.rptrl > 0x0A:
val = 0x00
else:
val = _mem.settings.rptrl
rs = RadioSetting("settings.rptrl", "STE Repeater Delay",
RadioSettingValueList(
LIST_STEDELAY, LIST_STEDELAY[val]))
basic.append(rs)
rs = RadioSetting("settings.ponmsg", "Power-On Message",
RadioSettingValueList(LIST_PONMSG, LIST_PONMSG[
_mem.settings.ponmsg]))
basic.append(rs)
rs = RadioSetting("settings.roger", "Roger Beep",
RadioSettingValueBoolean(_mem.settings.roger))
basic.append(rs)
# Advanced settings
rs = RadioSetting("settings.reset", "RESET Menu",
RadioSettingValueBoolean(_mem.settings.reset))
advanced.append(rs)
rs = RadioSetting("settings.menu", "All Menus",
RadioSettingValueBoolean(_mem.settings.menu))
advanced.append(rs)
rs = RadioSetting("settings.fmradio", "Broadcast FM Radio",
RadioSettingValueBoolean(_mem.settings.fmradio))
advanced.append(rs)
rs = RadioSetting("settings.alarm", "Alarm Sound",
RadioSettingValueBoolean(_mem.settings.alarm))
advanced.append(rs)
# Other settings
def _filter(name):
filtered = ""
for char in str(name):
if char in chirp_common.CHARSET_ASCII:
filtered += char
else:
filtered += " "
return filtered
_msg = _mem.firmware_msg
val = RadioSettingValueString(0, 7, _filter(_msg.line1))
val.set_mutable(False)
rs = RadioSetting("firmware_msg.line1", "Firmware Message 1", val)
other.append(rs)
val = RadioSettingValueString(0, 7, _filter(_msg.line2))
val.set_mutable(False)
rs = RadioSetting("firmware_msg.line2", "Firmware Message 2", val)
other.append(rs)
_msg = _mem.sixpoweron_msg
val = RadioSettingValueString(0, 7, _filter(_msg.line1))
val.set_mutable(False)
rs = RadioSetting("sixpoweron_msg.line1", "6+Power-On Message 1", val)
other.append(rs)
val = RadioSettingValueString(0, 7, _filter(_msg.line2))
val.set_mutable(False)
rs = RadioSetting("sixpoweron_msg.line2", "6+Power-On Message 2", val)
other.append(rs)
_msg = _mem.poweron_msg
rs = RadioSetting("poweron_msg.line1", "Power-On Message 1",
RadioSettingValueString(
0, 7, _filter(_msg.line1)))
other.append(rs)
rs = RadioSetting("poweron_msg.line2", "Power-On Message 2",
RadioSettingValueString(
0, 7, _filter(_msg.line2)))
other.append(rs)
lower = 130
upper = 179
rs = RadioSetting("limits.vhf.lower", "VHF Lower Limit (MHz)",
RadioSettingValueInteger(
lower, upper, _mem.limits.vhf.lower))
other.append(rs)
rs = RadioSetting("limits.vhf.upper", "VHF Upper Limit (MHz)",
RadioSettingValueInteger(
lower, upper, _mem.limits.vhf.upper))
other.append(rs)
lower = 400
upper = 520
rs = RadioSetting("limits.uhf.lower", "UHF Lower Limit (MHz)",
RadioSettingValueInteger(
lower, upper, _mem.limits.uhf.lower))
other.append(rs)
rs = RadioSetting("limits.uhf.upper", "UHF Upper Limit (MHz)",
RadioSettingValueInteger(
lower, upper, _mem.limits.uhf.upper))
other.append(rs)
# Work mode settings
rs = RadioSetting("settings.displayab", "Display",
RadioSettingValueList(
LIST_AB, LIST_AB[_mem.settings.displayab]))
work.append(rs)
rs = RadioSetting("settings.workmode", "VFO/MR Mode",
RadioSettingValueList(
LIST_WORKMODE,
LIST_WORKMODE[_mem.settings.workmode]))
work.append(rs)
rs = RadioSetting("settings.keylock", "Keypad Lock",
RadioSettingValueBoolean(_mem.settings.keylock))
work.append(rs)
rs = RadioSetting("wmchannel.mrcha", "MR A Channel",
RadioSettingValueInteger(0, 127,
_mem.wmchannel.mrcha))
work.append(rs)
rs = RadioSetting("wmchannel.mrchb", "MR B Channel",
RadioSettingValueInteger(0, 127,
_mem.wmchannel.mrchb))
work.append(rs)
def convert_bytes_to_freq(bytes):
real_freq = 0
for byte in bytes:
real_freq = (real_freq * 10) + byte
return chirp_common.format_freq(real_freq * 10)
def my_validate(value):
value = chirp_common.parse_freq(value)
msg = ("Can't be less than %i.0000")
if value > 99000000 and value < 130 * 1000000:
raise InvalidValueError(msg % (130))
msg = ("Can't be between %i.9975-%i.0000")
if (179 + 1) * 1000000 <= value and value < 400 * 1000000:
raise InvalidValueError(msg % (179, 400))
msg = ("Can't be greater than %i.9975")
if value > 99000000 and value > (520 + 1) * 1000000:
raise InvalidValueError(msg % (520))
return chirp_common.format_freq(value)
def apply_freq(setting, obj):
value = chirp_common.parse_freq(str(setting.value)) / 10
for i in range(7, -1, -1):
obj.freq[i] = value % 10
value /= 10
val1a = RadioSettingValueString(0, 10,
convert_bytes_to_freq(_mem.vfo.a.freq))
val1a.set_validate_callback(my_validate)
rs = RadioSetting("vfo.a.freq", "VFO A Frequency", val1a)
rs.set_apply_callback(apply_freq, _mem.vfo.a)
work.append(rs)
val1b = RadioSettingValueString(0, 10,
convert_bytes_to_freq(_mem.vfo.b.freq))
val1b.set_validate_callback(my_validate)
rs = RadioSetting("vfo.b.freq", "VFO B Frequency", val1b)
rs.set_apply_callback(apply_freq, _mem.vfo.b)
work.append(rs)
rs = RadioSetting("vfo.a.sftd", "VFO A Shift",
RadioSettingValueList(
LIST_SHIFTD, LIST_SHIFTD[_mem.vfo.a.sftd]))
work.append(rs)
rs = RadioSetting("vfo.b.sftd", "VFO B Shift",
RadioSettingValueList(
LIST_SHIFTD, LIST_SHIFTD[_mem.vfo.b.sftd]))
work.append(rs)
def convert_bytes_to_offset(bytes):
real_offset = 0
for byte in bytes:
real_offset = (real_offset * 10) + byte
return chirp_common.format_freq(real_offset * 1000)
def apply_offset(setting, obj):
value = chirp_common.parse_freq(str(setting.value)) / 1000
for i in range(5, -1, -1):
obj.offset[i] = value % 10
value /= 10
val1a = RadioSettingValueString(
0, 10, convert_bytes_to_offset(_mem.vfo.a.offset))
rs = RadioSetting("vfo.a.offset",
"VFO A Offset", val1a)
rs.set_apply_callback(apply_offset, _mem.vfo.a)
work.append(rs)
val1b = RadioSettingValueString(
0, 10, convert_bytes_to_offset(_mem.vfo.b.offset))
rs = RadioSetting("vfo.b.offset",
"VFO B Offset", val1b)
rs.set_apply_callback(apply_offset, _mem.vfo.b)
work.append(rs)
rs = RadioSetting("vfo.a.txpower3", "VFO A Power",
RadioSettingValueList(
LIST_TXPOWER,
LIST_TXPOWER[_mem.vfo.a.txpower3]))
work.append(rs)
rs = RadioSetting("vfo.b.txpower3", "VFO B Power",
RadioSettingValueList(
LIST_TXPOWER,
LIST_TXPOWER[_mem.vfo.b.txpower3]))
work.append(rs)
rs = RadioSetting("vfo.a.widenarr", "VFO A Bandwidth",
RadioSettingValueList(
LIST_BANDWIDTH,
LIST_BANDWIDTH[_mem.vfo.a.widenarr]))
work.append(rs)
rs = RadioSetting("vfo.b.widenarr", "VFO B Bandwidth",
RadioSettingValueList(
LIST_BANDWIDTH,
LIST_BANDWIDTH[_mem.vfo.b.widenarr]))
work.append(rs)
rs = RadioSetting("vfo.a.scode", "VFO A S-CODE",
RadioSettingValueList(
LIST_SCODE,
LIST_SCODE[_mem.vfo.a.scode]))
work.append(rs)
rs = RadioSetting("vfo.b.scode", "VFO B S-CODE",
RadioSettingValueList(
LIST_SCODE,
LIST_SCODE[_mem.vfo.b.scode]))
work.append(rs)
rs = RadioSetting("vfo.a.step", "VFO A Tuning Step",
RadioSettingValueList(
LIST_STEP, LIST_STEP[_mem.vfo.a.step]))
work.append(rs)
rs = RadioSetting("vfo.b.step", "VFO B Tuning Step",
RadioSettingValueList(
LIST_STEP, LIST_STEP[_mem.vfo.b.step]))
work.append(rs)
# broadcast FM settings
_fm_presets = self._memobj.fm_presets
if _fm_presets <= 108.0 * 10 - 650:
preset = _fm_presets / 10.0 + 65
elif _fm_presets >= 65.0 * 10 and _fm_presets <= 108.0 * 10:
preset = _fm_presets / 10.0
else:
preset = 76.0
rs = RadioSetting("fm_presets", "FM Preset(MHz)",
RadioSettingValueFloat(65, 108.0, preset, 0.1, 1))
fm_preset.append(rs)
# DTMF settings
def apply_code(setting, obj, length):
code = []
for j in range(0, length):
try:
code.append(DTMF_CHARS.index(str(setting.value)[j]))
except IndexError:
code.append(0xFF)
obj.code = code
for i in range(0, 15):
_codeobj = self._memobj.pttid[i].code
_code = "".join([DTMF_CHARS[x] for x in _codeobj if int(x) < 0x1F])
val = RadioSettingValueString(0, 5, _code, False)
val.set_charset(DTMF_CHARS)
pttid = RadioSetting("pttid/%i.code" % i,
"Signal Code %i" % (i + 1), val)
pttid.set_apply_callback(apply_code, self._memobj.pttid[i], 5)
dtmfe.append(pttid)
if _mem.ani.dtmfon > 0xC3:
val = 0x03
else:
val = _mem.ani.dtmfon
rs = RadioSetting("ani.dtmfon", "DTMF Speed (on)",
RadioSettingValueList(LIST_DTMFSPEED,
LIST_DTMFSPEED[val]))
dtmfe.append(rs)
if _mem.ani.dtmfoff > 0xC3:
val = 0x03
else:
val = _mem.ani.dtmfoff
rs = RadioSetting("ani.dtmfoff", "DTMF Speed (off)",
RadioSettingValueList(LIST_DTMFSPEED,
LIST_DTMFSPEED[val]))
dtmfe.append(rs)
_codeobj = self._memobj.ani.code
_code = "".join([DTMF_CHARS[x] for x in _codeobj if int(x) < 0x1F])
val = RadioSettingValueString(0, 5, _code, False)
val.set_charset(DTMF_CHARS)
rs = RadioSetting("ani.code", "ANI Code", val)
rs.set_apply_callback(apply_code, self._memobj.ani, 5)
dtmfe.append(rs)
rs = RadioSetting("ani.aniid", "When to send ANI ID",
RadioSettingValueList(LIST_PTTID,
LIST_PTTID[_mem.ani.aniid]))
dtmfe.append(rs)
# Service settings
for band in ["vhf", "uhf"]:
for index in range(0, 10):
key = "squelch.%s.sql%i" % (band, index)
if band == "vhf":
_obj = self._memobj.squelch.vhf
elif band == "uhf":
_obj = self._memobj.squelch.uhf
val = RadioSettingValueInteger(0, 123,
getattr(_obj, "sql%i" % (index)))
if index == 0:
val.set_mutable(False)
name = "%s Squelch %i" % (band.upper(), index)
rs = RadioSetting(key, name, val)
service.append(rs)
return top
def get_settings(self):
_settings = self._memobj.settings
basic = RadioSettingGroup("basic", "Basic")
sound = RadioSettingGroup("sound", "Sound")
dtmf = RadioSettingGroup("dtmf", "DTMF")
arts = RadioSettingGroup("arts", "ARTS")
eai = RadioSettingGroup("eai", "Emergency")
msg = RadioSettingGroup("msg", "Messages")
top = RadioSettings(basic, sound, arts, dtmf, eai, msg)
basic.append(RadioSetting(
"att_wx", "Attenuation WX",
RadioSettingValueBoolean(_settings.att_wx)))
basic.append(RadioSetting(
"att_marine", "Attenuation Marine",
RadioSettingValueBoolean(_settings.att_marine)))
basic.append(RadioSetting(
"att_broadcast", "Attenuation Broadcast",
RadioSettingValueBoolean(_settings.att_broadcast)))
basic.append(RadioSetting(
"ars", "Auto Repeater Shift",
RadioSettingValueBoolean(_settings.ars)))
basic.append(RadioSetting(
"home_vfo", "Home->VFO",
RadioSettingValueBoolean(_settings.home_vfo)))
basic.append(RadioSetting(
"bclo", "Busy Channel Lockout",
RadioSettingValueBoolean(_settings.bclo)))
basic.append(RadioSetting(
"busyled", "Busy LED",
RadioSettingValueBoolean(_settings.busy_led)))
basic.append(RadioSetting(
"fast_tone_search", "Fast Tone search",
RadioSettingValueBoolean(_settings.fast_tone_search)))
basic.append(RadioSetting(
"priority_revert", "Priority Revert",
RadioSettingValueBoolean(_settings.priority_revert)))
basic.append(RadioSetting(
"protect_memory", "Protect memory",
RadioSettingValueBoolean(_settings.protect_memory)))
basic.append(RadioSetting(
"scan_lamp", "Scan Lamp",
RadioSettingValueBoolean(_settings.scan_lamp)))
basic.append(RadioSetting(
"split_tone", "Split tone",
RadioSettingValueBoolean(_settings.split_tone)))
basic.append(RadioSetting(
"tone_search_mute", "Tone search mute",
RadioSettingValueBoolean(_settings.tone_search_mute)))
basic.append(RadioSetting(
"txsave", "TX save",
RadioSettingValueBoolean(_settings.txsave)))
basic.append(RadioSetting(
"wx_alert", "WX Alert",
RadioSettingValueBoolean(_settings.wx_alert)))
opts = ["Bar Int", "Bar Ext"]
basic.append(RadioSetting(
"am_antenna", "AM antenna",
RadioSettingValueList(opts, opts[_settings.am_antenna])))
opts = ["Ext Ant", "Earphone"]
basic.append(RadioSetting(
"fm_antenna", "FM antenna",
RadioSettingValueList(opts, opts[_settings.fm_antenna])))
opts = ["off"] + ["%0.1f" % (t / 60.0) for t in range(30, 750, 30)]
basic.append(RadioSetting(
"apo", "APO time (hrs)",
RadioSettingValueList(opts, opts[_settings.apo])))
opts = ["+/- 5 MHZ", "+/- 10 MHZ", "+/- 50 MHZ", "+/- 100 MHZ"]
basic.append(RadioSetting(
"channel_counter", "Channel counter",
RadioSettingValueList(opts, opts[_settings.channel_counter])))
opts = ["0.3", "0.5", "0.7", "1.0", "1.5"]
basic.append(RadioSetting(
"fw_key_timer", "FW key timer (s)",
RadioSettingValueList(opts, opts[_settings.fw_key_timer])))
opts = ["Home", "Reverse"]
basic.append(RadioSetting(
"hm_rv", "HM/RV key",
RadioSettingValueList(opts, opts[_settings.hm_rv])))
opts = ["%d" % t for t in range(2, 11)] + ["continuous", "off"]
basic.append(RadioSetting(
"lamp", "Lamp Timer (s)",
RadioSettingValueList(opts, opts[_settings.lamp])))
basic.append(RadioSetting(
"lock", "Lock",
RadioSettingValueBoolean(_settings.lock)))
opts = ["key", "ptt", "key+ptt"]
basic.append(RadioSetting(
"lock_mode", "Lock mode",
RadioSettingValueList(opts, opts[_settings.lock_mode])))
opts = ["10", "20", "50", "100"]
basic.append(RadioSetting(
"mem_ch_step", "Memory Chan step",
RadioSettingValueList(opts, opts[_settings.mem_ch_step])))
opts = ["lower", "next"]
basic.append(RadioSetting(
"mem_storage", "Memory storage mode",
RadioSettingValueList(opts, opts[_settings.mem_storage])))
opts = ["%d" % t for t in range(1, 10)]
basic.append(RadioSetting(
"mic_gain", "Mic gain",
RadioSettingValueList(opts, opts[_settings.mic_gain])))
opts = ["monitor", "tone call"]
basic.append(RadioSetting(
"moni_tcall", "Moni/TCall button",
RadioSettingValueList(opts, opts[_settings.moni_tcall])))
opts = ["off"] + \
["%02d:%02d" % (t / 60, t % 60) for t in range(10, 1450, 10)]
basic.append(RadioSetting(
"on_timer", "On Timer (hrs)",
RadioSettingValueList(opts, opts[_settings.on_timer])))
opts2 = ["off"] + \
["0.%d" % t for t in range(1, 10)] + \
["%1.1f" % (t / 10.0) for t in range(10, 105, 5)]
basic.append(RadioSetting(
"priority_time", "Priority time",
RadioSettingValueList(opts2, opts2[_settings.priority_time])))
opts = ["off", "20", "50", "100", "200"]
basic.append(RadioSetting(
"ptt_delay", "PTT delay (ms)",
RadioSettingValueList(opts, opts[_settings.ptt_delay])))
basic.append(RadioSetting(
"rx_save", "RX save (s)",
RadioSettingValueList(opts2, opts2[_settings.rx_save])))
basic.append(RadioSetting(
"scan_restart", "Scan restart (s)",
RadioSettingValueList(opts2, opts2[_settings.scan_restart])))
opts = ["%1.1f" % (t / 10.0) for t in range(20, 105, 5)] + \
["busy", "hold"]
basic.append(RadioSetting(
"scan_resume", "Scan resume (s)",
RadioSettingValueList(opts, opts[_settings.scan_resume])))
opts = ["single", "continuous"]
basic.append(RadioSetting(
"smart_search", "Smart search",
RadioSettingValueList(opts, opts[_settings.smart_search])))
opts = ["off"] + ["TRX %d" % t for t in range(1, 11)] + ["hold"] + \
["TX %d" % t for t in range(1, 11)]
basic.append(RadioSetting(
"sub_rx_timer", "Sub RX timer",
RadioSettingValueList(opts, opts[_settings.sub_rx_timer])))
opts = ["C", "F"]
basic.append(RadioSetting(
"temp_unit", "Temperature unit",
RadioSettingValueList(opts, opts[_settings.temp_unit])))
opts = ["off"] + ["%1.1f" % (t / 10.0) for t in range(5, 105, 5)]
basic.append(RadioSetting(
"tot", "Time-out timer (mins)",
RadioSettingValueList(opts, opts[_settings.tot])))
opts = ["all", "band"]
basic.append(RadioSetting(
"vfo_mode", "VFO mode",
RadioSettingValueList(opts, opts[_settings.vfo_mode])))
opts = ["off"] + ["%d" % t for t in range(5, 65, 5)] + ["EAI"]
basic.append(RadioSetting(
"wake_up", "Wake up (s)",
RadioSettingValueList(opts, opts[_settings.wake_up])))
opts = ["hold", "3 secs"]
basic.append(RadioSetting(
"vol_key_mode", "Volume key mode",
RadioSettingValueList(opts, opts[_settings.vol_key_mode])))
# subgroup programmable keys
opts = ["INTNET", "INT MR", "Set Mode (my key)"]
basic.append(RadioSetting(
"internet_key", "Internet key",
RadioSettingValueList(opts, opts[_settings.internet_key])))
keys = ["Antenna AM", "Antenna FM", "Antenna Attenuator",
"Auto Power Off", "Auto Repeater Shift", "ARTS Beep",
"ARTS Interval", "Busy Channel Lockout", "Bell Ringer",
"Bell Select", "Bank Name", "Band Edge Beep", "Beep Level",
"Beep Select", "Beep User", "Busy LED", "Channel Counter",
"Clock Shift", "CW ID", "CW Learning", "CW Pitch",
"CW Training", "DC Voltage", "DCS Code", "DCS Reverse",
"DTMF A/M", "DTMF Delay", "DTMF Set", "DTMF Speed",
"EAI Timer", "Emergency Alarm", "Ext Menu", "FW Key",
"Half Deviation", "Home/Reverse", "Home > VFO", "INT Code",
"INT Conn Mode", "INT A/M", "INT Set", "INT Key", "INTNET",
"Lamp", "LED Light", "Lock", "Moni/T-Call", "Mic Gain",
"Memory Display", "Memory Write Mode", "Memory Channel Step",
"Memory Name Write", "Memory Protect", "Memory Skip",
"Message List", "Message Reg", "Message Set", "On Timer",
"Open Message", "Pager Answer Back", "Pager Receive Code",
"Pager Transmit Code", "Pager Frequency", "Priority Revert",
"Priority Timer", "Password", "PTT Delay",
"Repeater Shift Direction", "Repeater Shift", "Receive Mode",
"Smart Search", "Save Rx", "Save Tx", "Scan Lamp",
"Scan Resume", "Scan Restart", "Speaker Out",
"Squelch Level", "Squelch Type", "Squelch S Meter",
"Squelch Split Tone", "Step", "Stereo", "Sub Rx", "Temp",
"Tone Frequency", "Time Out Timer", "Tone Search Mute",
"Tone Search Speed", "VFO Band", "VFO Skip", "Volume Mode",
"Wake Up", "Weather Alert"]
rs = RadioSetting(
"my_key", "My key",
RadioSettingValueList(keys, keys[_settings.my_key - 16]))
# TODO: fix keys list isnt exactly right order
# leave disabled in settings for now
# basic.append(rs)
# sound tab
sound.append(RadioSetting(
"band_edge_beep", "Band edge beep",
RadioSettingValueBoolean(_settings.band_edge_beep)))
opts = ["off", "key+scan", "key"]
sound.append(RadioSetting(
"beep_mode", "Beep mode",
RadioSettingValueList(opts, opts[_settings.beep_mode])))
_volumes = self._memobj.volumes
opts = map(str, range(0, 33))
sound.append(RadioSetting(
"speaker_vol", "Speaker volume",
RadioSettingValueList(opts, opts[_volumes.speaker])))
sound.append(RadioSetting(
"earphone_vol", "Earphone volume",
RadioSettingValueList(opts, opts[_volumes.earphone])))
opts = ["auto", "speaker"]
sound.append(RadioSetting(
"fm_speaker_out", "FM Speaker out",
RadioSettingValueList(opts, opts[_settings.fm_speaker_out])))
opts = ["mono", "stereo"]
sound.append(RadioSetting(
"fm_broadcast_mode", "FM broadcast mode",
RadioSettingValueList(
opts, opts[_settings.fm_broadcast_mode])))
opts = map(str, range(16))
sound.append(RadioSetting(
"sql_fm", "Squelch level (FM)",
RadioSettingValueList(opts, opts[_settings.sql_fm])))
opts = map(str, range(9))
sound.append(RadioSetting(
"sql_wfm", "Squelch level (WFM)",
RadioSettingValueList(opts, opts[_settings.sql_wfm])))
opts = map(str, range(16))
sound.append(RadioSetting(
"radio_am_sql", "Squelch level (Broadcast Radio AM)",
RadioSettingValueList(opts, opts[_settings.radio_am_sql])))
opts = map(str, range(9))
sound.append(RadioSetting(
"radio_fm_sql", "Squelch level (Broadcast Radio FM)",
RadioSettingValueList(opts, opts[_settings.radio_fm_sql])))
# dtmf tab
opts = ["manual", "auto"]
dtmf.append(RadioSetting(
"dtmf_autodialer", "DTMF autodialer mode",
RadioSettingValueList(opts, opts[_settings.dtmf_autodialer])))
opts = ["50", "250", "450", "750", "1000"]
dtmf.append(RadioSetting(
"dtmf_delay", "DTMF delay (ms)",
RadioSettingValueList(opts, opts[_settings.dtmf_delay])))
opts = ["50", "100"]
dtmf.append(RadioSetting(
"dtmf_speed", "DTMF speed (ms)",
RadioSettingValueList(opts, opts[_settings.dtmf_speed])))
opts = map(str, range(10))
dtmf.append(RadioSetting(
"dtmf_chan_active", "DTMF active",
RadioSettingValueList(
opts, opts[_settings.dtmf_chan_active])))
for i in range(10):
name = "dtmf" + str(i)
dtmfsetting = self._memobj.dtmf[i]
dtmfstr = ""
for c in dtmfsetting.memory:
if c < len(DTMFCHARSET):
dtmfstr += DTMFCHARSET[c]
LOG.debug(dtmfstr)
dtmfentry = RadioSettingValueString(0, 16, dtmfstr)
dtmfentry.set_charset(DTMFCHARSET + list(" "))
rs = RadioSetting(name, name.upper(), dtmfentry)
dtmf.append(rs)
# arts tab
arts.append(RadioSetting(
"arts", "ARTS",
RadioSettingValueBoolean(_settings.arts)))
opts = ["off", "in range", "always"]
arts.append(RadioSetting(
"arts_beep", "ARTS beep",
RadioSettingValueList(opts, opts[_settings.arts_beep])))
opts = ["15", "25"]
arts.append(RadioSetting(
"arts_interval", "ARTS interval",
RadioSettingValueList(opts, opts[_settings.arts_interval])))
arts.append(RadioSetting(
"arts_cwid_enable", "CW ID",
RadioSettingValueBoolean(_settings.arts_cwid_enable)))
cwid = RadioSettingValueString(
0, 16, self._decode_chars(_settings.arts_cwid.get_value()))
cwid.set_charset(CHARSET)
arts.append(RadioSetting("arts_cwid", "CW ID", cwid))
# EAI tab
eai.append(RadioSetting(
"emergency_eai", "EAI",
RadioSettingValueBoolean(_settings.emergency_eai)))
opts = ["interval %dm" % t for t in range(1, 10)] + \
["interval %dm" % t for t in range(10, 55, 5)] + \
["continuous %dm" % t for t in range(1, 10)] + \
["continuous %dm" % t for t in range(10, 55, 5)]
eai.append(RadioSetting(
"emergency_eai_time", "EAI time",
RadioSettingValueList(
opts, opts[_settings.emergency_eai_time])))
opts = ["beep", "strobe", "beep+strobe", "beam",
"beep+beam", "cw", "beep+cw", "cwt"]
eai.append(RadioSetting(
"emergency_signal", "emergency signal",
RadioSettingValueList(
opts, opts[_settings.emergency_signal])))
# msg tab
opts = ["off", "dc voltage", "message"]
msg.append(RadioSetting(
"openmsg_mode", "Opening message mode",
RadioSettingValueList(opts, opts[_settings.openmsg_mode])))
openmsg = RadioSettingValueString(
0, 6, self._decode_chars(_settings.openmsg.get_value()))
openmsg.set_charset(CHARSET)
msg.append(RadioSetting("openmsg", "Opening Message", openmsg))
return top
def get_settings(self):
_settings = self._memobj.settings
_dtmf_strings = self._memobj.dtmf_strings
_passwd = self._memobj.passwd
repeater = RadioSettingGroup("repeater", "Repeater Settings")
ctcss = RadioSettingGroup("ctcss", "CTCSS/DCS/EPCS Settings")
arts = RadioSettingGroup("arts", "ARTS Settings")
mbls = RadioSettingGroup("banks", "Memory Settings")
scan = RadioSettingGroup("scan", "Scan Settings")
dtmf = RadioSettingGroup("dtmf", "DTMF Settings")
wires = RadioSettingGroup("wires", "WiRES(tm) Settings")
switch = RadioSettingGroup("switch", "Switch/Knob Settings")
disp = RadioSettingGroup("disp", "Display Settings")
misc = RadioSettingGroup("misc", "Miscellaneous Settings")
setmode = RadioSettings(repeater, ctcss, arts, mbls, scan, dtmf, wires,
switch, disp, misc)
# numbers and names of settings refer to the way they're
# presented in the set menu, as well as the list starting on
# page 74 of the manual
# 1 APO
opts = ["Off", "30 Min", "1 Hour", "3 Hour", "5 Hour", "8 Hour"]
misc.append(
RadioSetting("apo", "Automatic Power Off",
RadioSettingValueList(opts, opts[_settings.apo])))
# 2 AR.BEP
opts = ["Off", "In Range", "Always"]
arts.append(
RadioSetting(
"arts_beep", "ARTS Beep",
RadioSettingValueList(opts, opts[_settings.arts_beep])))
# 3 AR.INT
opts = ["15 Sec", "25 Sec"]
arts.append(
RadioSetting(
"arts_interval", "ARTS Polling Interval",
RadioSettingValueList(opts, opts[_settings.arts_interval])))
# 4 ARS
opts = ["Off", "On"]
repeater.append(
RadioSetting("ars", "Automatic Repeater Shift",
RadioSettingValueList(opts, opts[_settings.ars])))
# 5 BCLO
opts = ["Off", "On"]
misc.append(
RadioSetting(
"busy_lockout", "Busy Channel Lock-Out",
RadioSettingValueList(opts, opts[_settings.busy_lockout])))
# 6 BEEP
opts = ["Off", "Key+Scan", "Key"]
switch.append(
RadioSetting("beep", "Enable the Beeper",
RadioSettingValueList(opts, opts[_settings.beep])))
# 7 BELL
opts = ["Off", "1", "3", "5", "8", "Continuous"]
ctcss.append(
RadioSetting("bell", "Bell Repetitions",
RadioSettingValueList(opts, opts[_settings.bell])))
# 8 BNK.LNK
for i in range(0, 8):
opts = ["Off", "On"]
mbs = (self._memobj.mbs >> i) & 1
rs = RadioSetting("mbs%i" % i, "Bank %s Scan" % (i + 1),
RadioSettingValueList(opts, opts[mbs]))
def apply_mbs(s, index):
if int(s.value):
self._memobj.mbs |= (1 << index)
else:
self._memobj.mbs &= ~(1 << index)
rs.set_apply_callback(apply_mbs, i)
mbls.append(rs)
# 9 BNK.NM - A per-bank attribute, nothing to do here.
# 10 CLK.SFT - A per-channel attribute, nothing to do here.
# 11 CW.ID
opts = ["Off", "On"]
arts.append(
RadioSetting("cw_id", "CW ID Enable",
RadioSettingValueList(opts, opts[_settings.cw_id])))
cw_id_text = ""
for i in _settings.cw_id_string:
try:
cw_id_text += CHARSET[i & 0x7F]
except IndexError:
if i != 0xff:
LOG.debug("unknown char index in cw id: %x " % (i))
val = RadioSettingValueString(0, 16, cw_id_text, True)
val.set_charset(CHARSET + "abcdefghijklmnopqrstuvwxyz")
rs = RadioSetting("cw_id_string", "CW Identifier Text", val)
def apply_cw_id(s):
str = s.value.get_value().upper().rstrip()
mval = ""
mval = [chr(CHARSET.index(x)) for x in str]
for x in range(len(mval), 16):
mval.append(chr(0xff))
for x in range(0, 16):
_settings.cw_id_string[x] = ord(mval[x])
rs.set_apply_callback(apply_cw_id)
arts.append(rs)
# 12 CWTRNG
opts = [
"Off", "4WPM", "5WPM", "6WPM", "7WPM", "8WPM", "9WPM", "10WPM",
"11WPM", "12WPM", "13WPM", "15WPM", "17WPM", "20WPM", "24WPM",
"30WPM", "40WPM"
]
misc.append(
RadioSetting("cw_trng", "CW Training",
RadioSettingValueList(opts, opts[_settings.cw_trng])))
# todo: make the setting of the units here affect the display
# of the speed. Not critical, but would be slick.
opts = ["CPM", "WPM"]
misc.append(
RadioSetting(
"cw_trng_units", "CW Training Units",
RadioSettingValueList(opts, opts[_settings.cw_trng_units])))
# 13 DC VLT - a read-only status, so nothing to do here
# 14 DCS CD - A per-channel attribute, nothing to do here
# 15 DCS.RV
opts = ["Disabled", "Enabled"]
ctcss.append(
RadioSetting(
"inverted_dcs", "\"Inverted\" DCS Code Decoding",
RadioSettingValueList(opts, opts[_settings.inverted_dcs])))
# 16 DIMMER
opts = ["Off"] + ["Level %d" % (x) for x in range(1, 11)]
disp.append(
RadioSetting("dimmer", "Dimmer",
RadioSettingValueList(opts, opts[_settings.dimmer])))
# 17 DT.A/M
opts = ["Manual", "Auto"]
dtmf.append(
RadioSetting(
"dtmf_mode", "DTMF Autodialer",
RadioSettingValueList(opts, opts[_settings.dtmf_mode])))
# 18 DT.DLY
opts = ["50 ms", "250 ms", "450 ms", "750 ms", "1000 ms"]
dtmf.append(
RadioSetting(
"dtmf_delay", "DTMF Autodialer Delay Time",
RadioSettingValueList(opts, opts[_settings.dtmf_delay])))
# 19 DT.SET
for memslot in range(0, 10):
dtmf_memory = ""
for i in _dtmf_strings[memslot].dtmf_string:
if i != 0xFF:
try:
dtmf_memory += CHARSET[i]
except IndexError:
LOG.debug("unknown char index in dtmf: %x " % (i))
val = RadioSettingValueString(0, 16, dtmf_memory, True)
val.set_charset(CHARSET + "abcdef")
rs = RadioSetting("dtmf_string_%d" % memslot,
"DTMF Memory %d" % memslot, val)
def apply_dtmf(s, i):
LOG.debug("applying dtmf for %x\n" % i)
str = s.value.get_value().upper().rstrip()
LOG.debug("str is %s\n" % str)
mval = ""
mval = [chr(CHARSET.index(x)) for x in str]
for x in range(len(mval), 16):
mval.append(chr(0xff))
for x in range(0, 16):
_dtmf_strings[i].dtmf_string[x] = ord(mval[x])
rs.set_apply_callback(apply_dtmf, memslot)
dtmf.append(rs)
# 20 DT.SPD
opts = ["50 ms", "100 ms"]
dtmf.append(
RadioSetting(
"dtmf_speed", "DTMF Autodialer Sending Speed",
RadioSettingValueList(opts, opts[_settings.dtmf_speed])))
# 21 EDG.BEP
opts = ["Off", "On"]
mbls.append(
RadioSetting(
"edge_beep", "Band Edge Beeper",
RadioSettingValueList(opts, opts[_settings.edge_beep])))
# 22 INT.CD
opts = ["DTMF %X" % (x) for x in range(0, 16)]
wires.append(
RadioSetting("int_cd", "Access Number for WiRES(TM)",
RadioSettingValueList(opts, opts[_settings.int_cd])))
# 23 ING MD
opts = ["Sister Radio Group", "Friends Radio Group"]
wires.append(
RadioSetting(
"wires_mode", "Internet Link Connection Mode",
RadioSettingValueList(opts, opts[_settings.wires_mode])))
# 24 INT.A/M
opts = ["Manual", "Auto"]
wires.append(
RadioSetting(
"wires_auto", "Internet Link Autodialer",
RadioSettingValueList(opts, opts[_settings.wires_auto])))
# 25 INT.SET
opts = ["F%d" % (x) for x in range(0, 10)]
wires.append(
RadioSetting("int_set", "Memory Register for "
"non-WiRES Internet",
RadioSettingValueList(opts, opts[_settings.int_set])))
# 26 LOCK
opts = [
"Key", "Dial", "Key + Dial", "PTT", "Key + PTT", "Dial + PTT",
"All"
]
switch.append(
RadioSetting("lock", "Control Locking",
RadioSettingValueList(opts, opts[_settings.lock])))
# 27 MCGAIN
opts = ["Level %d" % (x) for x in range(1, 10)]
misc.append(
RadioSetting("mic_gain", "Microphone Gain",
RadioSettingValueList(opts,
opts[_settings.mic_gain])))
# 28 MEM.SCN
opts = ["Tag 1", "Tag 2", "All Channels"]
rs = RadioSetting(
"scan_mode", "Memory Scan Mode",
RadioSettingValueList(opts, opts[_settings.scan_mode - 1]))
# this setting is unusual in that it starts at 1 instead of 0.
# that is, index 1 corresponds to "Tag 1", and index 0 is invalid.
# so we create a custom callback to handle this.
def apply_scan_mode(s):
myopts = ["Tag 1", "Tag 2", "All Channels"]
_settings.scan_mode = myopts.index(s.value.get_value()) + 1
rs.set_apply_callback(apply_scan_mode)
mbls.append(rs)
# 29 MW MD
opts = ["Lower", "Next"]
mbls.append(
RadioSetting("mw_mode", "Memory Write Mode",
RadioSettingValueList(opts, opts[_settings.mw_mode])))
# 30 NM SET - This is per channel, so nothing to do here
# 31 OPN.MSG
opts = ["Off", "DC Supply Voltage", "Text Message"]
disp.append(
RadioSetting("open_msg", "Opening Message Type",
RadioSettingValueList(opts,
opts[_settings.open_msg])))
openmsg = ""
for i in _settings.openMsg_Text:
try:
openmsg += CHARSET[i & 0x7F]
except IndexError:
if i != 0xff:
LOG.debug("unknown char index in openmsg: %x " % (i))
val = RadioSettingValueString(0, 6, openmsg, True)
val.set_charset(CHARSET + "abcdefghijklmnopqrstuvwxyz")
rs = RadioSetting("openMsg_Text", "Opening Message Text", val)
def apply_openmsg(s):
str = s.value.get_value().upper().rstrip()
mval = ""
mval = [chr(CHARSET.index(x)) for x in str]
for x in range(len(mval), 6):
mval.append(chr(0xff))
for x in range(0, 6):
_settings.openMsg_Text[x] = ord(mval[x])
rs.set_apply_callback(apply_openmsg)
disp.append(rs)
# 32 PAGER - a per-channel attribute
# 33 PAG.ABK
opts = ["Off", "On"]
ctcss.append(
RadioSetting("pag_abk", "Paging Answer Back",
RadioSettingValueList(opts, opts[_settings.pag_abk])))
# 34 PAG.CDR
opts = ["%2.2d" % (x) for x in range(1, 50)]
ctcss.append(
RadioSetting(
"pag_cdr_1", "Receive Page Code 1",
RadioSettingValueList(opts, opts[_settings.pag_cdr_1])))
ctcss.append(
RadioSetting(
"pag_cdr_2", "Receive Page Code 2",
RadioSettingValueList(opts, opts[_settings.pag_cdr_2])))
# 35 PAG.CDT
opts = ["%2.2d" % (x) for x in range(1, 50)]
ctcss.append(
RadioSetting(
"pag_cdt_1", "Transmit Page Code 1",
RadioSettingValueList(opts, opts[_settings.pag_cdt_1])))
ctcss.append(
RadioSetting(
"pag_cdt_2", "Transmit Page Code 2",
RadioSettingValueList(opts, opts[_settings.pag_cdt_2])))
# Common Button Options
button_opts = [
"Squelch Off", "Weather", "Smart Search", "Tone Scan", "Scan",
"T Call", "ARTS"
]
# 36 PRG P1
opts = button_opts + ["DC Volts"]
switch.append(
RadioSetting("prog_p1", "P1 Button",
RadioSettingValueList(opts, opts[_settings.prog_p1])))
# 37 PRG P2
opts = button_opts + ["Dimmer"]
switch.append(
RadioSetting("prog_p2", "P2 Button",
RadioSettingValueList(opts, opts[_settings.prog_p2])))
# 38 PRG P3
opts = button_opts + ["Mic Gain"]
switch.append(
RadioSetting("prog_p3", "P3 Button",
RadioSettingValueList(opts, opts[_settings.prog_p3])))
# 39 PRG P4
opts = button_opts + ["Skip"]
switch.append(
RadioSetting("prog_p4", "P4 Button",
RadioSettingValueList(opts, opts[_settings.prog_p4])))
# 40 PSWD
password = ""
for i in _passwd:
if i != 0xFF:
try:
password += CHARSET[i]
except IndexError:
LOG.debug("unknown char index in password: %x " % (i))
val = RadioSettingValueString(0, 4, password, True)
val.set_charset(CHARSET[0:15] + "abcdef ")
rs = RadioSetting("passwd", "Password", val)
def apply_password(s):
str = s.value.get_value().upper().rstrip()
mval = ""
mval = [chr(CHARSET.index(x)) for x in str]
for x in range(len(mval), 4):
mval.append(chr(0xff))
for x in range(0, 4):
_passwd[x] = ord(mval[x])
rs.set_apply_callback(apply_password)
misc.append(rs)
# 41 RESUME
opts = ["3 Sec", "5 Sec", "10 Sec", "Busy", "Hold"]
scan.append(
RadioSetting("resume", "Scan Resume Mode",
RadioSettingValueList(opts, opts[_settings.resume])))
# 42 RF.SQL
opts = ["Off"] + ["S-%d" % (x) for x in range(1, 10)]
misc.append(
RadioSetting("rf_sql", "RF Squelch Threshold",
RadioSettingValueList(opts, opts[_settings.rf_sql])))
# 43 RPT - per channel attribute, nothing to do here
# 44 RVRT
opts = ["Off", "On"]
misc.append(
RadioSetting("revert", "Priority Revert",
RadioSettingValueList(opts, opts[_settings.revert])))
# 45 S.SRCH
opts = ["Single", "Continuous"]
misc.append(
RadioSetting("s_search", "Smart Search Sweep Mode",
RadioSettingValueList(opts,
opts[_settings.s_search])))
# 46 SHIFT - per channel setting, nothing to do here
# 47 SKIP = per channel setting, nothing to do here
# 48 SPLIT - per channel attribute, nothing to do here
# 49 SQL.TYP - per channel attribute, nothing to do here
# 50 STEP - per channel attribute, nothing to do here
# 51 TEMP - read-only status, nothing to do here
# 52 TN FRQ - per channel attribute, nothing to do here
# 53 TOT
opts = ["Off", "1 Min", "3 Min", "5 Min", "10 Min"]
misc.append(
RadioSetting("tot", "Timeout Timer",
RadioSettingValueList(opts, opts[_settings.tot])))
# 54 TS MUT
opts = ["Off", "On"]
ctcss.append(
RadioSetting("ts_mut", "Tone Search Mute",
RadioSettingValueList(opts, opts[_settings.ts_mut])))
# 55 TS SPEED
opts = ["Fast", "Slow"]
ctcss.append(
RadioSetting("ts_speed", "Tone Search Scanner Speed",
RadioSettingValueList(opts,
opts[_settings.ts_speed])))
# 56 VFO.SCN
opts = ["+/- 1MHz", "+/- 2MHz", "+/-5MHz", "All"]
scan.append(
RadioSetting("vfo_scan", "VFO Scanner Width",
RadioSettingValueList(opts,
opts[_settings.vfo_scan])))
# 57 WX.ALT
opts = ["Off", "On"]
misc.append(
RadioSetting("wx_alert", "Weather Alert Scan",
RadioSettingValueList(opts,
opts[_settings.wx_alert])))
# 58 WX.VOL
opts = ["Normal", "Maximum"]
misc.append(
RadioSetting(
"wx_vol_max", "Weather Alert Volume",
RadioSettingValueList(opts, opts[_settings.wx_vol_max])))
# 59 W/N DV - this is a per-channel attribute, nothing to do here
return setmode
def _get_settings(self):
_settings = self._memobj.settings
_vfoa = self._memobj.vfoa
_vfob = self._memobj.vfob
cfg_grp = RadioSettingGroup("cfg_grp", "Configuration")
vfoa_grp = RadioSettingGroup("vfoa_grp", "VFO A Settings")
vfob_grp = RadioSettingGroup("vfob_grp", "VFO B Settings")
key_grp = RadioSettingGroup("key_grp", "Key Settings")
lmt_grp = RadioSettingGroup("lmt_grp", "Frequency Limits")
uhf_lmt_grp = RadioSettingGroup("uhf_lmt_grp", "UHF")
vhf_lmt_grp = RadioSettingGroup("vhf_lmt_grp", "VHF")
oem_grp = RadioSettingGroup("oem_grp", "OEM Info")
lmt_grp.append(uhf_lmt_grp);
lmt_grp.append(vhf_lmt_grp);
group = RadioSettings(cfg_grp, vfoa_grp, vfob_grp,
key_grp, lmt_grp, oem_grp)
#
# Configuration Settings
#
rs = RadioSetting("channel_menu", "Menu available in channel mode",
RadioSettingValueBoolean(_settings.channel_menu))
cfg_grp.append(rs)
rs = RadioSetting("ponmsg", "Poweron message",
RadioSettingValueList(
PONMSG_LIST, PONMSG_LIST[_settings.ponmsg]))
cfg_grp.append(rs)
rs = RadioSetting("voice", "Voice Guide",
RadioSettingValueBoolean(_settings.voice))
cfg_grp.append(rs)
rs = RadioSetting("language", "Language",
RadioSettingValueList(LANGUAGE_LIST,
LANGUAGE_LIST[_settings.
language]))
cfg_grp.append(rs)
rs = RadioSetting("timeout", "Timeout Timer",
RadioSettingValueList(
TIMEOUT_LIST, TIMEOUT_LIST[_settings.timeout]))
cfg_grp.append(rs)
rs = RadioSetting("toalarm", "Timeout Alarm",
RadioSettingValueInteger(0, 10, _settings.toalarm))
cfg_grp.append(rs)
rs = RadioSetting("roger_beep", "Roger Beep",
RadioSettingValueList(ROGER_LIST,
ROGER_LIST[_settings.roger_beep]))
cfg_grp.append(rs)
rs = RadioSetting("power_save", "Power save",
RadioSettingValueBoolean(_settings.power_save))
cfg_grp.append(rs)
rs = RadioSetting("autolock", "Autolock",
RadioSettingValueBoolean(_settings.autolock))
cfg_grp.append(rs)
rs = RadioSetting("keylock", "Keypad Lock",
RadioSettingValueBoolean(_settings.keylock))
cfg_grp.append(rs)
rs = RadioSetting("beep", "Keypad Beep",
RadioSettingValueBoolean(_settings.beep))
cfg_grp.append(rs)
rs = RadioSetting("stopwatch", "Stopwatch",
RadioSettingValueBoolean(_settings.stopwatch))
cfg_grp.append(rs)
rs = RadioSetting("backlight", "Backlight",
RadioSettingValueList(BACKLIGHT_LIST,
BACKLIGHT_LIST[_settings.
backlight]))
cfg_grp.append(rs)
rs = RadioSetting("dtmf_st", "DTMF Sidetone",
RadioSettingValueList(DTMFST_LIST,
DTMFST_LIST[_settings.
dtmf_st]))
cfg_grp.append(rs)
rs = RadioSetting("ani_sw", "ANI-ID Switch",
RadioSettingValueBoolean(_settings.ani_sw))
cfg_grp.append(rs)
rs = RadioSetting("ptt_id", "PTT-ID Delay",
RadioSettingValueList(PTTID_LIST,
PTTID_LIST[_settings.ptt_id]))
cfg_grp.append(rs)
rs = RadioSetting("ring_time", "Ring Time",
RadioSettingValueList(LIST_10,
LIST_10[_settings.ring_time]))
cfg_grp.append(rs)
rs = RadioSetting("scan_rev", "Scan Mode",
RadioSettingValueList(SCANMODE_LIST,
SCANMODE_LIST[_settings.
scan_rev]))
cfg_grp.append(rs)
rs = RadioSetting("vox", "VOX",
RadioSettingValueList(LIST_10,
LIST_10[_settings.vox]))
cfg_grp.append(rs)
rs = RadioSetting("prich_sw", "Priority Channel Switch",
RadioSettingValueBoolean(_settings.prich_sw))
cfg_grp.append(rs)
rs = RadioSetting("pri_ch", "Priority Channel",
RadioSettingValueInteger(1, 999, _settings.pri_ch))
cfg_grp.append(rs)
rs = RadioSetting("rpt_mode", "Radio Mode",
RadioSettingValueList(RPTMODE_LIST,
RPTMODE_LIST[_settings.
rpt_mode]))
cfg_grp.append(rs)
rs = RadioSetting("rpt_set", "Repeater Setting",
RadioSettingValueList(RPTSET_LIST,
RPTSET_LIST[_settings.
rpt_set]))
cfg_grp.append(rs)
rs = RadioSetting("rpt_spk", "Repeater Mode Speaker",
RadioSettingValueBoolean(_settings.rpt_spk))
cfg_grp.append(rs)
rs = RadioSetting("rpt_ptt", "Repeater PTT",
RadioSettingValueBoolean(_settings.rpt_ptt))
cfg_grp.append(rs)
rs = RadioSetting("dtmf_tx_time", "DTMF Tx Duration",
RadioSettingValueList(DTMF_TIMES,
DTMF_TIMES[_settings.
dtmf_tx_time]))
cfg_grp.append(rs)
rs = RadioSetting("dtmf_interval", "DTMF Interval",
RadioSettingValueList(DTMF_TIMES,
DTMF_TIMES[_settings.
dtmf_interval]))
cfg_grp.append(rs)
rs = RadioSetting("alert", "Alert Tone",
RadioSettingValueList(ALERTS_LIST,
ALERTS_LIST[_settings.alert]))
cfg_grp.append(rs)
rs = RadioSetting("rpt_tone", "Repeater Tone",
RadioSettingValueBoolean(_settings.rpt_tone))
cfg_grp.append(rs)
rs = RadioSetting("rpt_hold", "Repeater Hold Time",
RadioSettingValueList(HOLD_TIMES,
HOLD_TIMES[_settings.
rpt_hold]))
cfg_grp.append(rs)
rs = RadioSetting("scan_det", "Scan DET",
RadioSettingValueBoolean(_settings.scan_det))
cfg_grp.append(rs)
rs = RadioSetting("sc_qt", "SC-QT",
RadioSettingValueList(SCQT_LIST,
SCQT_LIST[_settings.sc_qt]))
cfg_grp.append(rs)
rs = RadioSetting("smuteset", "SubFreq Mute",
RadioSettingValueList(SMUTESET_LIST,
SMUTESET_LIST[_settings.
smuteset]))
cfg_grp.append(rs)
#
# VFO A Settings
#
rs = RadioSetting("workmode_a", "VFO A Workmode",
RadioSettingValueList(WORKMODE_LIST, WORKMODE_LIST[_settings.workmode_a]))
vfoa_grp.append(rs)
rs = RadioSetting("work_cha", "VFO A Channel",
RadioSettingValueInteger(1, 999, _settings.work_cha))
vfoa_grp.append(rs)
rs = RadioSetting("vfoa.rxfreq", "VFO A Rx Frequency",
RadioSettingValueInteger(
134000000, 520000000, _vfoa.rxfreq * 10, 5000))
vfoa_grp.append(rs)
rs = RadioSetting("vfoa.txoffset", "VFO A Tx Offset",
RadioSettingValueInteger(
0, 520000000, _vfoa.txoffset * 10, 5000))
vfoa_grp.append(rs)
# u16 rxtone;
# u16 txtone;
rs = RadioSetting("vfoa.power", "VFO A Power",
RadioSettingValueList(
POWER_LIST, POWER_LIST[_vfoa.power]))
vfoa_grp.append(rs)
# shift_dir:2
rs = RadioSetting("vfoa.iswide", "VFO A NBFM",
RadioSettingValueList(
BANDWIDTH_LIST, BANDWIDTH_LIST[_vfoa.iswide]))
vfoa_grp.append(rs)
rs = RadioSetting("vfoa.mute_mode", "VFO A Mute",
RadioSettingValueList(
SPMUTE_LIST, SPMUTE_LIST[_vfoa.mute_mode]))
vfoa_grp.append(rs)
rs = RadioSetting("vfoa.step", "VFO A Step (kHz)",
RadioSettingValueList(
STEP_LIST, STEP_LIST[_vfoa.step]))
vfoa_grp.append(rs)
rs = RadioSetting("vfoa.squelch", "VFO A Squelch",
RadioSettingValueList(
LIST_10, LIST_10[_vfoa.squelch]))
vfoa_grp.append(rs)
rs = RadioSetting("bcl_a", "Busy Channel Lock-out A",
RadioSettingValueBoolean(_settings.bcl_a))
vfoa_grp.append(rs)
#
# VFO B Settings
#
rs = RadioSetting("workmode_b", "VFO B Workmode",
RadioSettingValueList(WORKMODE_LIST, WORKMODE_LIST[_settings.workmode_b]))
vfob_grp.append(rs)
rs = RadioSetting("work_chb", "VFO B Channel",
RadioSettingValueInteger(1, 999, _settings.work_chb))
vfob_grp.append(rs)
rs = RadioSetting("vfob.rxfreq", "VFO B Rx Frequency",
RadioSettingValueInteger(
134000000, 520000000, _vfob.rxfreq * 10, 5000))
vfob_grp.append(rs)
rs = RadioSetting("vfob.txoffset", "VFO B Tx Offset",
RadioSettingValueInteger(
0, 520000000, _vfob.txoffset * 10, 5000))
vfob_grp.append(rs)
# u16 rxtone;
# u16 txtone;
rs = RadioSetting("vfob.power", "VFO B Power",
RadioSettingValueList(
POWER_LIST, POWER_LIST[_vfob.power]))
vfob_grp.append(rs)
# shift_dir:2
rs = RadioSetting("vfob.iswide", "VFO B NBFM",
RadioSettingValueList(
BANDWIDTH_LIST, BANDWIDTH_LIST[_vfob.iswide]))
vfob_grp.append(rs)
rs = RadioSetting("vfob.mute_mode", "VFO B Mute",
RadioSettingValueList(
SPMUTE_LIST, SPMUTE_LIST[_vfob.mute_mode]))
vfob_grp.append(rs)
rs = RadioSetting("vfob.step", "VFO B Step (kHz)",
RadioSettingValueList(
STEP_LIST, STEP_LIST[_vfob.step]))
vfob_grp.append(rs)
rs = RadioSetting("vfob.squelch", "VFO B Squelch",
RadioSettingValueList(
LIST_10, LIST_10[_vfob.squelch]))
vfob_grp.append(rs)
rs = RadioSetting("bcl_b", "Busy Channel Lock-out B",
RadioSettingValueBoolean(_settings.bcl_b))
vfob_grp.append(rs)
#
# Key Settings
#
_msg = str(_settings.dispstr).split("\0")[0]
val = RadioSettingValueString(0, 15, _msg)
val.set_mutable(True)
rs = RadioSetting("dispstr", "Display Message", val)
key_grp.append(rs)
dtmfchars = "0123456789"
_codeobj = _settings.ani_code
_code = "".join([dtmfchars[x] for x in _codeobj if int(x) < 0x0A])
val = RadioSettingValueString(3, 6, _code, False)
val.set_charset(dtmfchars)
rs = RadioSetting("ani_code", "ANI Code", val)
def apply_ani_id(setting, obj):
value = []
for j in range(0, 6):
try:
value.append(dtmfchars.index(str(setting.value)[j]))
except IndexError:
value.append(0xFF)
obj.ani_code = value
rs.set_apply_callback(apply_ani_id, _settings)
key_grp.append(rs)
rs = RadioSetting("pf1_func", "PF1 Key function",
RadioSettingValueList(
PF1KEY_LIST,
PF1KEY_LIST[_settings.pf1_func]))
key_grp.append(rs)
rs = RadioSetting("pf3_func", "PF3 Key function",
RadioSettingValueList(
PF3KEY_LIST,
PF3KEY_LIST[_settings.pf3_func]))
key_grp.append(rs)
#
# Limits settings
#
rs = RadioSetting("uhf_limits.rx_start", "UHF RX Lower Limit",
RadioSettingValueInteger(
400000000, 520000000,
self._memobj.uhf_limits.rx_start * 10, 5000))
uhf_lmt_grp.append(rs)
rs = RadioSetting("uhf_limits.rx_stop", "UHF RX Upper Limit",
RadioSettingValueInteger(
400000000, 520000000,
self._memobj.uhf_limits.rx_stop * 10, 5000))
uhf_lmt_grp.append(rs)
rs = RadioSetting("uhf_limits.tx_start", "UHF TX Lower Limit",
RadioSettingValueInteger(
400000000, 520000000,
self._memobj.uhf_limits.tx_start * 10, 5000))
uhf_lmt_grp.append(rs)
rs = RadioSetting("uhf_limits.tx_stop", "UHF TX Upper Limit",
RadioSettingValueInteger(
400000000, 520000000,
self._memobj.uhf_limits.tx_stop * 10, 5000))
uhf_lmt_grp.append(rs)
rs = RadioSetting("vhf_limits.rx_start", "VHF RX Lower Limit",
RadioSettingValueInteger(
134000000, 174997500,
self._memobj.vhf_limits.rx_start * 10, 5000))
vhf_lmt_grp.append(rs)
rs = RadioSetting("vhf_limits.rx_stop", "VHF RX Upper Limit",
RadioSettingValueInteger(
134000000, 174997500,
self._memobj.vhf_limits.rx_stop * 10, 5000))
vhf_lmt_grp.append(rs)
rs = RadioSetting("vhf_limits.tx_start", "VHF TX Lower Limit",
RadioSettingValueInteger(
134000000, 174997500,
self._memobj.vhf_limits.tx_start * 10, 5000))
vhf_lmt_grp.append(rs)
rs = RadioSetting("vhf_limits.tx_stop", "VHF TX Upper Limit",
RadioSettingValueInteger(
134000000, 174997500,
self._memobj.vhf_limits.tx_stop * 10, 5000))
vhf_lmt_grp.append(rs)
#
# OEM info
#
def _decode(lst):
_str = ''.join([chr(c) for c in lst
if chr(c) in chirp_common.CHARSET_ASCII])
return _str
def do_nothing(setting, obj):
return
_str = _decode(self._memobj.oem_info.model)
val = RadioSettingValueString(0, 15, _str)
val.set_mutable(False)
rs = RadioSetting("oem_info.model", "Model", val)
rs.set_apply_callback(do_nothing, _settings)
oem_grp.append(rs)
_str = _decode(self._memobj.oem_info.oem1)
val = RadioSettingValueString(0, 15, _str)
val.set_mutable(False)
rs = RadioSetting("oem_info.oem1", "OEM String 1", val)
rs.set_apply_callback(do_nothing, _settings)
oem_grp.append(rs)
_str = _decode(self._memobj.oem_info.oem2)
val = RadioSettingValueString(0, 15, _str)
val.set_mutable(False)
rs = RadioSetting("oem_info.oem2", "OEM String 2", val)
rs.set_apply_callback(do_nothing, _settings)
oem_grp.append(rs)
_str = _decode(self._memobj.oem_info.version)
val = RadioSettingValueString(0, 15, _str)
val.set_mutable(False)
rs = RadioSetting("oem_info.version", "Software Version", val)
rs.set_apply_callback(do_nothing, _settings)
oem_grp.append(rs)
_str = _decode(self._memobj.oem_info.date)
val = RadioSettingValueString(0, 15, _str)
val.set_mutable(False)
rs = RadioSetting("oem_info.date", "OEM Date", val)
rs.set_apply_callback(do_nothing, _settings)
oem_grp.append(rs)
return group
def _get_settings(self):
_settings = self._memobj.settings
_vfoa = self._memobj.vfoa
_vfob = self._memobj.vfob
cfg_grp = RadioSettingGroup("cfg_grp", "Configuration")
vfoa_grp = RadioSettingGroup("vfoa_grp", "VFO A Settings")
vfob_grp = RadioSettingGroup("vfob_grp", "VFO B Settings")
key_grp = RadioSettingGroup("key_grp", "Key Settings")
lmt_grp = RadioSettingGroup("lmt_grp", "Frequency Limits")
uhf_lmt_grp = RadioSettingGroup("uhf_lmt_grp", "UHF")
vhf_lmt_grp = RadioSettingGroup("vhf_lmt_grp", "VHF")
vhf1_lmt_grp = RadioSettingGroup("vhf1_lmt_grp", "VHF1")
oem_grp = RadioSettingGroup("oem_grp", "OEM Info")
lmt_grp.append(vhf_lmt_grp);
lmt_grp.append(vhf1_lmt_grp);
lmt_grp.append(uhf_lmt_grp);
group = RadioSettings(cfg_grp, vfoa_grp, vfob_grp,
key_grp, lmt_grp, oem_grp)
#
# Configuration Settings
#
rs = RadioSetting("channel_menu", "Menu available in channel mode",
RadioSettingValueBoolean(_settings.channel_menu))
cfg_grp.append(rs)
rs = RadioSetting("ponmsg", "Poweron message",
RadioSettingValueList(
PONMSG_LIST, PONMSG_LIST[_settings.ponmsg]))
cfg_grp.append(rs)
rs = RadioSetting("voice", "Voice Guide",
RadioSettingValueBoolean(_settings.voice))
cfg_grp.append(rs)
rs = RadioSetting("language", "Language",
RadioSettingValueList(LANGUAGE_LIST,
LANGUAGE_LIST[_settings.
language]))
cfg_grp.append(rs)
rs = RadioSetting("timeout", "Timeout Timer",
RadioSettingValueList(
TIMEOUT_LIST, TIMEOUT_LIST[_settings.timeout]))
cfg_grp.append(rs)
rs = RadioSetting("toalarm", "Timeout Alarm",
RadioSettingValueInteger(0, 10, _settings.toalarm))
cfg_grp.append(rs)
rs = RadioSetting("roger_beep", "Roger Beep",
RadioSettingValueList(ROGER_LIST,
ROGER_LIST[_settings.roger_beep]))
cfg_grp.append(rs)
rs = RadioSetting("power_save", "Power save",
RadioSettingValueBoolean(_settings.power_save))
cfg_grp.append(rs)
rs = RadioSetting("autolock", "Autolock",
RadioSettingValueBoolean(_settings.autolock))
cfg_grp.append(rs)
rs = RadioSetting("keylock", "Keypad Lock",
RadioSettingValueBoolean(_settings.keylock))
cfg_grp.append(rs)
rs = RadioSetting("beep", "Keypad Beep",
RadioSettingValueBoolean(_settings.beep))
cfg_grp.append(rs)
rs = RadioSetting("stopwatch", "Stopwatch",
RadioSettingValueBoolean(_settings.stopwatch))
cfg_grp.append(rs)
rs = RadioSetting("backlight", "Backlight",
RadioSettingValueList(BACKLIGHT_LIST,
BACKLIGHT_LIST[_settings.
backlight]))
cfg_grp.append(rs)
rs = RadioSetting("dtmf_st", "DTMF Sidetone",
RadioSettingValueList(DTMFST_LIST,
DTMFST_LIST[_settings.
dtmf_st]))
cfg_grp.append(rs)
rs = RadioSetting("ani_sw", "ANI-ID Switch",
RadioSettingValueBoolean(_settings.ani_sw))
cfg_grp.append(rs)
rs = RadioSetting("ptt_id", "PTT-ID Delay",
RadioSettingValueList(PTTID_LIST,
PTTID_LIST[_settings.ptt_id]))
cfg_grp.append(rs)
rs = RadioSetting("ring_time", "Ring Time",
RadioSettingValueList(LIST_10,
LIST_10[_settings.ring_time]))
cfg_grp.append(rs)
rs = RadioSetting("scan_rev", "Scan Mode",
RadioSettingValueList(SCANMODE_LIST,
SCANMODE_LIST[_settings.
scan_rev]))
cfg_grp.append(rs)
rs = RadioSetting("vox", "VOX",
RadioSettingValueList(LIST_10,
LIST_10[_settings.vox]))
cfg_grp.append(rs)
rs = RadioSetting("prich_sw", "Priority Channel Switch",
RadioSettingValueBoolean(_settings.prich_sw))
cfg_grp.append(rs)
rs = RadioSetting("pri_ch", "Priority Channel",
RadioSettingValueInteger(1, 999, _settings.pri_ch))
cfg_grp.append(rs)
rs = RadioSetting("rpt_mode", "Radio Mode",
RadioSettingValueList(RPTMODE_LIST,
RPTMODE_LIST[_settings.
rpt_mode]))
cfg_grp.append(rs)
rs = RadioSetting("rpt_set", "Repeater Setting",
RadioSettingValueList(RPTSET_LIST,
RPTSET_LIST[_settings.
rpt_set]))
cfg_grp.append(rs)
rs = RadioSetting("rpt_spk", "Repeater Mode Speaker",
RadioSettingValueBoolean(_settings.rpt_spk))
cfg_grp.append(rs)
rs = RadioSetting("rpt_ptt", "Repeater PTT",
RadioSettingValueBoolean(_settings.rpt_ptt))
cfg_grp.append(rs)
rs = RadioSetting("dtmf_tx_time", "DTMF Tx Duration",
RadioSettingValueList(DTMF_TIMES,
DTMF_TIMES[_settings.
dtmf_tx_time]))
cfg_grp.append(rs)
rs = RadioSetting("dtmf_interval", "DTMF Interval",
RadioSettingValueList(DTMF_TIMES,
DTMF_TIMES[_settings.
dtmf_interval]))
cfg_grp.append(rs)
rs = RadioSetting("alert", "Alert Tone",
RadioSettingValueList(ALERTS_LIST,
ALERTS_LIST[_settings.alert]))
cfg_grp.append(rs)
rs = RadioSetting("rpt_tone", "Repeater Tone",
RadioSettingValueBoolean(_settings.rpt_tone))
cfg_grp.append(rs)
rs = RadioSetting("rpt_hold", "Repeater Hold Time",
RadioSettingValueList(HOLD_TIMES,
HOLD_TIMES[_settings.
rpt_hold]))
cfg_grp.append(rs)
rs = RadioSetting("scan_det", "Scan DET",
RadioSettingValueBoolean(_settings.scan_det))
cfg_grp.append(rs)
rs = RadioSetting("sc_qt", "SC-QT",
RadioSettingValueList(SCQT_LIST,
SCQT_LIST[_settings.sc_qt]))
cfg_grp.append(rs)
rs = RadioSetting("smuteset", "SubFreq Mute",
RadioSettingValueList(SMUTESET_LIST,
SMUTESET_LIST[_settings.
smuteset]))
cfg_grp.append(rs)
#
# VFO A Settings
#
rs = RadioSetting("workmode_a", "VFO A Workmode",
RadioSettingValueList(WORKMODE_LIST, WORKMODE_LIST[_settings.workmode_a]))
vfoa_grp.append(rs)
rs = RadioSetting("work_cha", "VFO A Channel",
RadioSettingValueInteger(1, 999, _settings.work_cha))
vfoa_grp.append(rs)
rs = RadioSetting("vfoa.rxfreq", "VFO A Rx Frequency",
RadioSettingValueInteger(
134000000, 520000000, _vfoa.rxfreq * 10, 5000))
vfoa_grp.append(rs)
rs = RadioSetting("vfoa.txoffset", "VFO A Tx Offset",
RadioSettingValueInteger(
0, 520000000, _vfoa.txoffset * 10, 5000))
vfoa_grp.append(rs)
# u16 rxtone;
# u16 txtone;
rs = RadioSetting("vfoa.power", "VFO A Power",
RadioSettingValueList(
POWER_LIST, POWER_LIST[_vfoa.power]))
vfoa_grp.append(rs)
# shift_dir:2
rs = RadioSetting("vfoa.iswide", "VFO A NBFM",
RadioSettingValueList(
BANDWIDTH_LIST, BANDWIDTH_LIST[_vfoa.iswide]))
vfoa_grp.append(rs)
rs = RadioSetting("vfoa.mute_mode", "VFO A Mute",
RadioSettingValueList(
SPMUTE_LIST, SPMUTE_LIST[_vfoa.mute_mode]))
vfoa_grp.append(rs)
rs = RadioSetting("vfoa.step", "VFO A Step (kHz)",
RadioSettingValueList(
STEP_LIST, STEP_LIST[_vfoa.step]))
vfoa_grp.append(rs)
rs = RadioSetting("vfoa.squelch", "VFO A Squelch",
RadioSettingValueList(
LIST_10, LIST_10[_vfoa.squelch]))
vfoa_grp.append(rs)
rs = RadioSetting("bcl_a", "Busy Channel Lock-out A",
RadioSettingValueBoolean(_settings.bcl_a))
vfoa_grp.append(rs)
#
# VFO B Settings
#
rs = RadioSetting("workmode_b", "VFO B Workmode",
RadioSettingValueList(WORKMODE_LIST, WORKMODE_LIST[_settings.workmode_b]))
vfob_grp.append(rs)
rs = RadioSetting("work_chb", "VFO B Channel",
RadioSettingValueInteger(1, 999, _settings.work_chb))
vfob_grp.append(rs)
rs = RadioSetting("vfob.rxfreq", "VFO B Rx Frequency",
RadioSettingValueInteger(
134000000, 520000000, _vfob.rxfreq * 10, 5000))
vfob_grp.append(rs)
rs = RadioSetting("vfob.txoffset", "VFO B Tx Offset",
RadioSettingValueInteger(
0, 520000000, _vfob.txoffset * 10, 5000))
vfob_grp.append(rs)
# u16 rxtone;
# u16 txtone;
rs = RadioSetting("vfob.power", "VFO B Power",
RadioSettingValueList(
POWER_LIST, POWER_LIST[_vfob.power]))
vfob_grp.append(rs)
# shift_dir:2
rs = RadioSetting("vfob.iswide", "VFO B NBFM",
RadioSettingValueList(
BANDWIDTH_LIST, BANDWIDTH_LIST[_vfob.iswide]))
vfob_grp.append(rs)
rs = RadioSetting("vfob.mute_mode", "VFO B Mute",
RadioSettingValueList(
SPMUTE_LIST, SPMUTE_LIST[_vfob.mute_mode]))
vfob_grp.append(rs)
rs = RadioSetting("vfob.step", "VFO B Step (kHz)",
RadioSettingValueList(
STEP_LIST, STEP_LIST[_vfob.step]))
vfob_grp.append(rs)
rs = RadioSetting("vfob.squelch", "VFO B Squelch",
RadioSettingValueList(
LIST_10, LIST_10[_vfob.squelch]))
vfob_grp.append(rs)
rs = RadioSetting("bcl_b", "Busy Channel Lock-out B",
RadioSettingValueBoolean(_settings.bcl_b))
vfob_grp.append(rs)
#
# Key Settings
#
_msg = str(_settings.dispstr).split("\0")[0]
val = RadioSettingValueString(0, 15, _msg)
val.set_mutable(True)
rs = RadioSetting("dispstr", "Display Message", val)
key_grp.append(rs)
dtmfchars = "0123456789"
_codeobj = _settings.ani_code
_code = "".join([dtmfchars[x] for x in _codeobj if int(x) < 0x0A])
val = RadioSettingValueString(3, 6, _code, False)
val.set_charset(dtmfchars)
rs = RadioSetting("ani_code", "ANI Code", val)
def apply_ani_id(setting, obj):
value = []
for j in range(0, 6):
try:
value.append(dtmfchars.index(str(setting.value)[j]))
except IndexError:
value.append(0xFF)
obj.ani_code = value
rs.set_apply_callback(apply_ani_id, _settings)
key_grp.append(rs)
rs = RadioSetting("pf1_func", "PF1 Key function",
RadioSettingValueList(
PF1KEY_LIST,
PF1KEY_LIST[_settings.pf1_func]))
key_grp.append(rs)
rs = RadioSetting("pf3_func", "PF3 Key function",
RadioSettingValueList(
PF3KEY_LIST,
PF3KEY_LIST[_settings.pf3_func]))
key_grp.append(rs)
#
# Limits settings
#
rs = RadioSetting("vhf_limits.rx_start", "VHF RX Lower Limit",
RadioSettingValueInteger(
134000000, 174997500,
self._memobj.vhf_limits.rx_start * 10, 5000))
vhf_lmt_grp.append(rs)
rs = RadioSetting("vhf_limits.rx_stop", "VHF RX Upper Limit",
RadioSettingValueInteger(
134000000, 174997500,
self._memobj.vhf_limits.rx_stop * 10, 5000))
vhf_lmt_grp.append(rs)
rs = RadioSetting("vhf_limits.tx_start", "VHF TX Lower Limit",
RadioSettingValueInteger(
134000000, 174997500,
self._memobj.vhf_limits.tx_start * 10, 5000))
vhf_lmt_grp.append(rs)
rs = RadioSetting("vhf_limits.tx_stop", "VHF TX Upper Limit",
RadioSettingValueInteger(
134000000, 174997500,
self._memobj.vhf_limits.tx_stop * 10, 5000))
vhf_lmt_grp.append(rs)
rs = RadioSetting("vhf1_limits.rx_start", "VHF1 RX Lower Limit",
RadioSettingValueInteger(
220000000, 265000000,
self._memobj.vhf1_limits.rx_start * 10, 5000))
vhf1_lmt_grp.append(rs)
rs = RadioSetting("vhf1_limits.rx_stop", "VHF1 RX Upper Limit",
RadioSettingValueInteger(
220000000, 265000000,
self._memobj.vhf1_limits.rx_stop * 10, 5000))
vhf1_lmt_grp.append(rs)
rs = RadioSetting("vhf1_limits.tx_start", "VHF1 TX Lower Limit",
RadioSettingValueInteger(
220000000, 265000000,
self._memobj.vhf1_limits.tx_start * 10, 5000))
vhf1_lmt_grp.append(rs)
rs = RadioSetting("vhf1_limits.tx_stop", "VHF1 TX Upper Limit",
RadioSettingValueInteger(
220000000, 265000000,
self._memobj.vhf1_limits.tx_stop * 10, 5000))
vhf1_lmt_grp.append(rs)
rs = RadioSetting("uhf_limits.rx_start", "UHF RX Lower Limit",
RadioSettingValueInteger(
400000000, 520000000,
self._memobj.uhf_limits.rx_start * 10, 5000))
uhf_lmt_grp.append(rs)
rs = RadioSetting("uhf_limits.rx_stop", "UHF RX Upper Limit",
RadioSettingValueInteger(
400000000, 520000000,
self._memobj.uhf_limits.rx_stop * 10, 5000))
uhf_lmt_grp.append(rs)
rs = RadioSetting("uhf_limits.tx_start", "UHF TX Lower Limit",
RadioSettingValueInteger(
400000000, 520000000,
self._memobj.uhf_limits.tx_start * 10, 5000))
uhf_lmt_grp.append(rs)
rs = RadioSetting("uhf_limits.tx_stop", "UHF TX Upper Limit",
RadioSettingValueInteger(
400000000, 520000000,
self._memobj.uhf_limits.tx_stop * 10, 5000))
uhf_lmt_grp.append(rs)
#
# OEM info
#
def _decode(lst):
_str = ''.join([chr(c) for c in lst
if chr(c) in chirp_common.CHARSET_ASCII])
return _str
def do_nothing(setting, obj):
return
_str = _decode(self._memobj.oem_info.model)
val = RadioSettingValueString(0, 15, _str)
val.set_mutable(False)
rs = RadioSetting("oem_info.model", "Model", val)
rs.set_apply_callback(do_nothing, _settings)
oem_grp.append(rs)
_str = _decode(self._memobj.oem_info.oem1)
val = RadioSettingValueString(0, 15, _str)
val.set_mutable(False)
rs = RadioSetting("oem_info.oem1", "OEM String 1", val)
rs.set_apply_callback(do_nothing, _settings)
oem_grp.append(rs)
_str = _decode(self._memobj.oem_info.oem2)
val = RadioSettingValueString(0, 15, _str)
val.set_mutable(False)
rs = RadioSetting("oem_info.oem2", "OEM String 2", val)
rs.set_apply_callback(do_nothing, _settings)
oem_grp.append(rs)
_str = _decode(self._memobj.oem_info.version)
val = RadioSettingValueString(0, 15, _str)
val.set_mutable(False)
rs = RadioSetting("oem_info.version", "Software Version", val)
rs.set_apply_callback(do_nothing, _settings)
oem_grp.append(rs)
_str = _decode(self._memobj.oem_info.date)
val = RadioSettingValueString(0, 15, _str)
val.set_mutable(False)
rs = RadioSetting("oem_info.date", "OEM Date", val)
rs.set_apply_callback(do_nothing, _settings)
oem_grp.append(rs)
return group
def get_settings(self):
_settings = self._memobj.settings
basic = RadioSettingGroup("basic", "Basic")
autodial = RadioSettingGroup("autodial", "AutoDial")
keymaps = RadioSettingGroup("keymaps", "KeyMaps")
top = RadioSettingGroup("top", "All Settings", basic, keymaps,
autodial)
rs = RadioSetting("beep", "Beep",
RadioSettingValueBoolean(_settings.beep))
basic.append(rs)
rs = RadioSetting("lock", "Lock",
RadioSettingValueBoolean(_settings.lock))
basic.append(rs)
rs = RadioSetting("ars", "Auto Repeater Shift",
RadioSettingValueBoolean(_settings.ars))
basic.append(rs)
rs = RadioSetting("txpwrsave", "TX Power Save",
RadioSettingValueBoolean(_settings.txpwrsave))
basic.append(rs)
rs = RadioSetting("txnarrow", "TX Narrow",
RadioSettingValueBoolean(_settings.txnarrow))
basic.append(rs)
options = ["Off", "S-3", "S-5", "S-Full"]
rs = RadioSetting(
"rfsqlvl", "RF Squelch Level",
RadioSettingValueList(options, options[_settings.rfsqlvl]))
basic.append(rs)
options = ["Off", "Band A", "Band B", "Both"]
rs = RadioSetting(
"pttlock", "PTT Lock",
RadioSettingValueList(options, options[_settings.pttlock]))
basic.append(rs)
rs = RadioSetting("cwid_en", "CWID Enable",
RadioSettingValueBoolean(_settings.cwid_en))
basic.append(rs)
cwid = RadioSettingValueString(0, 7, self._decode_cwid(_settings.cwid))
cwid.set_charset(FT90_CWID_CHARS)
rs = RadioSetting("cwid", "CWID", cwid)
basic.append(rs)
options = ["OFF"] + map(str, range(1, 12 + 1))
rs = RadioSetting(
"apo", "APO time (hrs)",
RadioSettingValueList(options, options[_settings.apo]))
basic.append(rs)
options = ["Off"] + map(str, range(1, 60 + 1))
rs = RadioSetting(
"tot", "Time Out Timer (mins)",
RadioSettingValueList(options, options[_settings.tot]))
basic.append(rs)
options = ["off", "Auto/TX", "Auto", "TX"]
rs = RadioSetting(
"fancontrol", "Fan Control",
RadioSettingValueList(options, options[_settings.fancontrol]))
basic.append(rs)
keyopts = [
"Scan Up", "Scan Down", "Repeater", "Reverse", "Tone Burst",
"Tx Power", "Home Ch", "VFO/MR", "Tone", "Priority"
]
rs = RadioSetting(
"key_lt", "Left Key",
RadioSettingValueList(keyopts, keyopts[_settings.key_lt]))
keymaps.append(rs)
rs = RadioSetting(
"key_rt", "Right Key",
RadioSettingValueList(keyopts, keyopts[_settings.key_rt]))
keymaps.append(rs)
rs = RadioSetting(
"key_p1", "P1 Key",
RadioSettingValueList(keyopts, keyopts[_settings.key_p1]))
keymaps.append(rs)
rs = RadioSetting(
"key_p2", "P2 Key",
RadioSettingValueList(keyopts, keyopts[_settings.key_p2]))
keymaps.append(rs)
rs = RadioSetting(
"key_acc", "ACC Key",
RadioSettingValueList(keyopts, keyopts[_settings.key_acc]))
keymaps.append(rs)
options = map(str, range(0, 12 + 1))
rs = RadioSetting(
"lcdcontrast", "LCD Contrast",
RadioSettingValueList(options, options[_settings.lcdcontrast]))
basic.append(rs)
options = ["off", "d4", "d3", "d2", "d1"]
rs = RadioSetting(
"dimmer", "Dimmer",
RadioSettingValueList(options, options[_settings.dimmer]))
basic.append(rs)
options = ["TRX Normal", "RX Reverse", "TX Reverse", "TRX Reverse"]
rs = RadioSetting(
"dcsmode", "DCS Mode",
RadioSettingValueList(options, options[_settings.dcsmode]))
basic.append(rs)
options = ["50 ms", "100 ms"]
rs = RadioSetting(
"dtmfspeed", "DTMF Speed",
RadioSettingValueList(options, options[_settings.dtmfspeed]))
autodial.append(rs)
options = ["50 ms", "250 ms", "450 ms", "750 ms", "1 sec"]
rs = RadioSetting(
"dtmftxdelay", "DTMF TX Delay",
RadioSettingValueList(options, options[_settings.dtmftxdelay]))
autodial.append(rs)
options = map(str, range(1, 8 + 1))
rs = RadioSetting(
"dtmf_active", "DTMF Active",
RadioSettingValueList(options, options[_settings.dtmf_active]))
autodial.append(rs)
# setup 8 dtmf autodial entries
for i in map(str, range(1, 9)):
objname = "dtmf" + i
dtmfsetting = getattr(_settings, objname)
dtmflen = getattr(_settings, objname + "_len")
dtmfstr = self._bbcd2dtmf(dtmfsetting, dtmflen)
dtmf = RadioSettingValueString(0, 16, dtmfstr)
dtmf.set_charset(FT90_DTMF_CHARS + list(" "))
rs = RadioSetting(objname, objname.upper(), dtmf)
autodial.append(rs)
return top
def get_settings(self):
_settings = self._memobj.settings
basic = RadioSettingGroup("basic", "Basic Settings")
group = RadioSettings(basic)
options = ["Time", "Carrier", "Search"]
rs = RadioSetting("scantype", "Scan Type",
RadioSettingValueList(options,
options[_settings.scantype]))
basic.append(rs)
options = ["Off"] + ["%s min" % x for x in range(1, 8)]
rs = RadioSetting("timeout", "Time Out Timer",
RadioSettingValueList(
options, options[_settings.timeout]))
basic.append(rs)
options = ["A", "B"]
rs = RadioSetting("freqmode_ab", "Frequency Mode",
RadioSettingValueList(
options, options[_settings.freqmode_ab]))
basic.append(rs)
options = ["Frequency Mode", "Channel Mode"]
rs = RadioSetting("workmode_a", "Radio Work Mode(A)",
RadioSettingValueList(
options, options[_settings.workmode_a]))
basic.append(rs)
rs = RadioSetting("workmode_b", "Radio Work Mode(B)",
RadioSettingValueList(
options, options[_settings.workmode_b]))
basic.append(rs)
options = ["Frequency", "Name", "Channel"]
rs = RadioSetting("mdf_a", "Display Format(F1)",
RadioSettingValueList(
options, options[_settings.mdf_a]))
basic.append(rs)
rs = RadioSetting("mdf_b", "Display Format(F2)",
RadioSettingValueList(
options, options[_settings.mdf_b]))
basic.append(rs)
rs = RadioSetting("mem_chan_a", "Mem Channel (A)",
RadioSettingValueInteger(
1, 99, _settings.mem_chan_a))
basic.append(rs)
rs = RadioSetting("mem_chan_b", "Mem Channel (B)",
RadioSettingValueInteger(
1, 99, _settings.mem_chan_b))
basic.append(rs)
options = ["Off", "BOT", "EOT", "Both"]
rs = RadioSetting("pttid", "PTT-ID",
RadioSettingValueList(
options, options[_settings.pttid]))
basic.append(rs)
dtmfchars = "0123456789ABCD*#"
_codeobj = self._memobj.pttid.code
_code = "".join([dtmfchars[x] for x in _codeobj if int(x) < 0x1F])
val = RadioSettingValueString(0, 6, _code, False)
val.set_charset(dtmfchars)
rs = RadioSetting("pttid.code", "PTT-ID Code", val)
def apply_code(setting, obj):
code = []
for j in range(0, 6):
try:
code.append(dtmfchars.index(str(setting.value)[j]))
except IndexError:
code.append(0xFF)
obj.code = code
rs.set_apply_callback(apply_code, self._memobj.pttid)
basic.append(rs)
rs = RadioSetting("squelch", "Squelch Level",
RadioSettingValueInteger(0, 9, _settings.squelch))
basic.append(rs)
rs = RadioSetting("vox", "VOX Level",
RadioSettingValueInteger(0, 9, _settings.vox))
basic.append(rs)
options = ["Frequency Mode", "Channel Mode"]
rs = RadioSetting("workmode_fm", "FM Work Mode",
RadioSettingValueList(
options, options[_settings.workmode_fm]))
basic.append(rs)
options = ["Current Frequency", "F1 Frequency", "F2 Frequency"]
rs = RadioSetting("txtdr", "Dual Standby TX Priority",
RadioSettingValueList(options,
options[_settings.txtdr]))
basic.append(rs)
options = ["English", "Chinese"]
rs = RadioSetting("language", "Language",
RadioSettingValueList(options,
options[_settings.language]))
basic.append(rs)
rs = RadioSetting("tdr", "Dual Standby",
RadioSettingValueBoolean(_settings.tdr))
basic.append(rs)
rs = RadioSetting("roger", "Roger Beep",
RadioSettingValueBoolean(_settings.roger))
basic.append(rs)
rs = RadioSetting("backlight", "Backlight",
RadioSettingValueBoolean(_settings.backlight))
basic.append(rs)
rs = RadioSetting("save_funct", "Save Mode",
RadioSettingValueBoolean(_settings.save_funct))
basic.append(rs)
rs = RadioSetting("fm", "FM Function",
RadioSettingValueBoolean(_settings.fm))
basic.append(rs)
rs = RadioSetting("beep_tone_disabled", "Beep Prompt",
RadioSettingValueBoolean(
not _settings.beep_tone_disabled))
basic.append(rs)
rs = RadioSetting("voice_prompt", "Voice Prompt",
RadioSettingValueBoolean(_settings.voice_prompt))
basic.append(rs)
rs = RadioSetting("sidetone", "DTMF Side Tone",
RadioSettingValueBoolean(_settings.sidetone))
basic.append(rs)
rs = RadioSetting("ste_disabled", "Squelch Tail Eliminate",
RadioSettingValueBoolean(not _settings.ste_disabled))
basic.append(rs)
_limit = int(self._memobj.limits.lower_vhf) / 10
rs = RadioSetting("limits.lower_vhf", "VHF Lower Limit (MHz)",
RadioSettingValueInteger(128, 270, _limit))
def apply_limit(setting, obj):
value = int(setting.value) * 10
obj.lower_vhf = value
rs.set_apply_callback(apply_limit, self._memobj.limits)
basic.append(rs)
_limit = int(self._memobj.limits.upper_vhf) / 10
rs = RadioSetting("limits.upper_vhf", "VHF Upper Limit (MHz)",
RadioSettingValueInteger(128, 270, _limit))
def apply_limit(setting, obj):
value = int(setting.value) * 10
obj.upper_vhf = value
rs.set_apply_callback(apply_limit, self._memobj.limits)
basic.append(rs)
_limit = int(self._memobj.limits.lower_uhf) / 10
rs = RadioSetting("limits.lower_uhf", "UHF Lower Limit (MHz)",
RadioSettingValueInteger(400, 520, _limit))
def apply_limit(setting, obj):
value = int(setting.value) * 10
obj.lower_uhf = value
rs.set_apply_callback(apply_limit, self._memobj.limits)
basic.append(rs)
_limit = int(self._memobj.limits.upper_uhf) / 10
rs = RadioSetting("limits.upper_uhf", "UHF Upper Limit (MHz)",
RadioSettingValueInteger(400, 520, _limit))
def apply_limit(setting, obj):
value = int(setting.value) * 10
obj.upper_uhf = value
rs.set_apply_callback(apply_limit, self._memobj.limits)
basic.append(rs)
fm_preset = RadioSettingGroup("fm_preset", "FM Radio Presets")
group.append(fm_preset)
for i in range(0, 16):
if self._memobj.fm_presets[i] < 0x01AF:
used = True
preset = self._memobj.fm_presets[i] / 10.0 + 65
else:
used = False
preset = 65
rs = RadioSetting("fm_presets_%1i" % i, "FM Preset %i" % (i + 1),
RadioSettingValueBoolean(used),
RadioSettingValueFloat(65, 108, preset, 0.1, 1))
fm_preset.append(rs)
testmode = RadioSettingGroup("testmode", "Test Mode Settings")
group.append(testmode)
vhfdata = ["136-139", "140-144", "145-149", "150-154",
"155-159", "160-164", "165-169", "170-174"]
uhfdata = ["400-409", "410-419", "420-429", "430-439",
"440-449", "450-459", "460-469", "470-479"]
powernamedata = ["Hi", "Lo"]
powerkeydata = ["hipwr", "lopwr"]
for power in range(0, 2):
for index in range(0, 8):
key = "test.vhf%s%i" % (powerkeydata[power], index)
name = "%s Mhz %s Power" % (vhfdata[index],
powernamedata[power])
rs = RadioSetting(
key, name, RadioSettingValueInteger(
0, 255, getattr(
self._memobj.test,
"vhf%s%i" % (powerkeydata[power], index))))
testmode.append(rs)
for power in range(0, 2):
for index in range(0, 8):
key = "test.uhf%s%i" % (powerkeydata[power], index)
name = "%s Mhz %s Power" % (uhfdata[index],
powernamedata[power])
rs = RadioSetting(
key, name, RadioSettingValueInteger(
0, 255, getattr(
self._memobj.test,
"uhf%s%i" % (powerkeydata[power], index))))
testmode.append(rs)
for band in ["vhf", "uhf"]:
for index in range(0, 10):
key = "test.%ssquelch%i" % (band, index)
name = "%s Squelch %i" % (band.upper(), index)
rs = RadioSetting(
key, name, RadioSettingValueInteger(
0, 255, getattr(
self._memobj.test,
"%ssquelch%i" % (band, index))))
testmode.append(rs)
return group
def get_settings(self):
_settings = self._memobj.settings
repeater = RadioSettingGroup("repeater", "Repeater Settings")
ctcss = RadioSettingGroup("ctcss", "CTCSS/DCS/DTMF Settings")
arts = RadioSettingGroup("arts", "ARTS Settings")
scan = RadioSettingGroup("scan", "Scan Settings")
power = RadioSettingGroup("power", "Power Saver Settings")
wires = RadioSettingGroup("wires", "WiRES(tm) Settings")
eai = RadioSettingGroup("eai", "EAI/EPCS Settings")
switch = RadioSettingGroup("switch", "Switch/Knob Settings")
misc = RadioSettingGroup("misc", "Miscellaneous Settings")
mbls = RadioSettingGroup("banks", "Memory Bank Link Scan")
setmode = RadioSettings(repeater, ctcss, arts, scan, power,
wires, eai, switch, misc, mbls)
# APO
opts = ["OFF"] + ["%0.1f" % (x * 0.5) for x in range(1, 24+1)]
misc.append(
RadioSetting(
"apo", "Automatic Power Off",
RadioSettingValueList(opts, opts[_settings.apo])))
# AR.BEP
opts = ["OFF", "INRANG", "ALWAYS"]
arts.append(
RadioSetting(
"ar_bep", "ARTS Beep",
RadioSettingValueList(opts, opts[_settings.ar_bep])))
# AR.INT
opts = ["25 SEC", "15 SEC"]
arts.append(
RadioSetting(
"ar_int", "ARTS Polling Interval",
RadioSettingValueList(opts, opts[_settings.ar_int])))
# ARS
opts = ["OFF", "ON"]
repeater.append(
RadioSetting(
"ars", "Automatic Repeater Shift",
RadioSettingValueList(opts, opts[_settings.ars])))
# BCLO
opts = ["OFF", "ON"]
misc.append(RadioSetting(
"bclo", "Busy Channel Lock-Out",
RadioSettingValueList(opts, opts[_settings.bclo])))
# BEEP
opts = ["OFF", "KEY", "KEY+SC"]
rs = RadioSetting(
"beep_key", "Enable the Beeper",
RadioSettingValueList(
opts, opts[_settings.beep_key + _settings.beep_sc]))
def apply_beep(s, obj):
setattr(obj, "beep_key",
(int(s.value) & 1) or ((int(s.value) >> 1) & 1))
setattr(obj, "beep_sc", (int(s.value) >> 1) & 1)
rs.set_apply_callback(apply_beep, self._memobj.settings)
switch.append(rs)
# BELL
opts = ["OFF", "1T", "3T", "5T", "8T", "CONT"]
ctcss.append(RadioSetting("bell", "Bell Repetitions",
RadioSettingValueList(opts, opts[_settings.bell])))
# BSY.LED
opts = ["ON", "OFF"]
misc.append(RadioSetting("bsy_led", "Busy LED",
RadioSettingValueList(opts, opts[_settings.bsy_led])))
# DCS.NR
opts = ["TR/X N", "RX R", "TX R", "T/RX R"]
ctcss.append(RadioSetting("dcs_nr", "\"Inverted\" DCS Code Decoding",
RadioSettingValueList(opts, opts[_settings.dcs_nr])))
# DT.DLY
opts = ["50 MS", "100 MS", "250 MS", "450 MS", "750 MS", "1000 MS"]
ctcss.append(RadioSetting("dt_dly", "DTMF Autodialer Delay Time",
RadioSettingValueList(opts, opts[_settings.dt_dly])))
# DT.SPD
opts = ["50 MS", "100 MS"]
ctcss.append(RadioSetting("dt_spd", "DTMF Autodialer Sending Speed",
RadioSettingValueList(opts, opts[_settings.dt_spd])))
# DT.WRT
for i in range(0, 9):
dtmf = self._memobj.dtmf[i]
str = ""
for c in dtmf.memory:
if c == 0xFF:
break
if c < len(DTMF_CHARS):
str += DTMF_CHARS[c]
val = RadioSettingValueString(0, 16, str, False)
val.set_charset(DTMF_CHARS + list("abcd"))
rs = RadioSetting("dtmf_%i" % i,
"DTMF Autodialer Memory %i" % (i + 1), val)
def apply_dtmf(s, obj):
str = s.value.get_value().upper().rstrip()
val = [DTMF_CHARS.index(x) for x in str]
for x in range(len(val), 16):
val.append(0xFF)
obj.memory = val
rs.set_apply_callback(apply_dtmf, dtmf)
ctcss.append(rs)
# EDG.BEP
opts = ["OFF", "ON"]
misc.append(RadioSetting("edg_bep", "Band Edge Beeper",
RadioSettingValueList(opts, opts[_settings.edg_bep])))
# I.NET
opts = ["OFF", "COD", "MEM"]
rs = RadioSetting("inet", "Internet Link Connection",
RadioSettingValueList(
opts, opts[_settings.inet - 1]))
def apply_inet(s, obj):
setattr(obj, s.get_name(), int(s.value) + 1)
rs.set_apply_callback(apply_inet, self._memobj.settings)
wires.append(rs)
# INT.CD
opts = ["CODE 0", "CODE 1", "CODE 2", "CODE 3", "CODE 4",
"CODE 5", "CODE 6", "CODE 7", "CODE 8", "CODE 9",
"CODE A", "CODE B", "CODE C", "CODE D", "CODE E", "CODE F"]
wires.append(RadioSetting("int_cd", "Access Number for WiRES(TM)",
RadioSettingValueList(opts, opts[_settings.int_cd])))
# INT.MR
opts = ["d1", "d2", "d3", "d4", "d5", "d6", "d7", "d8", "d9"]
wires.append(RadioSetting(
"int_mr", "Access Number (DTMF) for Non-WiRES(TM)",
RadioSettingValueList(opts, opts[_settings.int_mr])))
# LAMP
opts = ["KEY", "5SEC", "TOGGLE"]
switch.append(RadioSetting("lamp", "Lamp Mode",
RadioSettingValueList(opts, opts[_settings.lamp])))
# LOCK
opts = ["LK KEY", "LKDIAL", "LK K+D", "LK PTT",
"LP P+K", "LK P+D", "LK ALL"]
rs = RadioSetting("lock", "Control Locking",
RadioSettingValueList(
opts, opts[_settings.lock - 1]))
def apply_lock(s, obj):
setattr(obj, s.get_name(), int(s.value) + 1)
rs.set_apply_callback(apply_lock, self._memobj.settings)
switch.append(rs)
# M/T-CL
opts = ["MONI", "T-CALL"]
switch.append(RadioSetting("mt_cl", "MONI Switch Function",
RadioSettingValueList(opts, opts[_settings.mt_cl])))
# PAG.ABK
opts = ["OFF", "ON"]
eai.append(RadioSetting("pag_abk", "Paging Answer Back",
RadioSettingValueList(opts, opts[_settings.pag_abk])))
# RESUME
opts = ["TIME", "HOLD", "BUSY"]
scan.append(RadioSetting("resume", "Scan Resume Mode",
RadioSettingValueList(opts, opts[_settings.resume])))
# REV/HM
opts = ["REV", "HOME"]
switch.append(RadioSetting("rev_hm", "HM/RV Key Function",
RadioSettingValueList(opts, opts[_settings.rev_hm])))
# RF.SQL
opts = ["OFF", "S-1", "S-2", "S-3", "S-4", "S-5", "S-6",
"S-7", "S-8", "S-FULL"]
misc.append(RadioSetting("rf_sql", "RF Squelch Threshold",
RadioSettingValueList(opts, opts[_settings.rf_sql])))
# PRI.RVT
opts = ["OFF", "ON"]
scan.append(RadioSetting("pri_rvt", "Priority Revert",
RadioSettingValueList(opts, opts[_settings.pri_rvt])))
# RXSAVE
opts = ["OFF", "200 MS", "300 MS", "500 MS", "1 S", "2 S"]
power.append(RadioSetting(
"rxsave", "Receive Mode Batery Savery Interval",
RadioSettingValueList(opts, opts[_settings.rxsave])))
# S.SRCH
opts = ["SINGLE", "CONT"]
misc.append(RadioSetting("ssrch", "Smart Search Sweep Mode",
RadioSettingValueList(opts, opts[_settings.ssrch])))
# SCN.MD
opts = ["MEM", "ONLY"]
scan.append(RadioSetting(
"scn_md", "Memory Scan Channel Selection Mode",
RadioSettingValueList(opts, opts[_settings.scn_md])))
# SCN.LMP
opts = ["OFF", "ON"]
scan.append(RadioSetting("scn_lmp", "Scan Lamp",
RadioSettingValueList(opts, opts[_settings.scn_lmp])))
# TOT
opts = ["OFF"] + ["%dMIN" % (x) for x in range(1, 30+1)]
misc.append(RadioSetting("tot", "Timeout Timer",
RadioSettingValueList(opts, opts[_settings.tot])))
# TX.LED
opts = ["ON", "OFF"]
misc.append(RadioSetting("tx_led", "TX LED",
RadioSettingValueList(opts, opts[_settings.tx_led])))
# TXSAVE
opts = ["OFF", "ON"]
power.append(RadioSetting("txsave", "Transmitter Battery Saver",
RadioSettingValueList(opts, opts[_settings.txsave])))
# VFO.BND
opts = ["BAND", "ALL"]
misc.append(RadioSetting("vfo_bnd", "VFO Band Edge Limiting",
RadioSettingValueList(opts, opts[_settings.vfo_bnd])))
# WX.ALT
opts = ["OFF", "ON"]
scan.append(RadioSetting("wx_alt", "Weather Alert Scan",
RadioSettingValueList(opts, opts[_settings.wx_alt])))
# MBS
for i in range(0, 10):
opts = ["OFF", "ON"]
mbs = (self._memobj.mbs >> i) & 1
rs = RadioSetting("mbs%i" % i, "Bank %s Scan" % (i + 1),
RadioSettingValueList(opts, opts[mbs]))
def apply_mbs(s, index):
if int(s.value):
self._memobj.mbs |= (1 << index)
else:
self._memobj.mbs &= ~(1 << index)
rs.set_apply_callback(apply_mbs, i)
mbls.append(rs)
return setmode
def _get_settings(self):
_settings = self._memobj.settings
basic = RadioSettingGroup("basic", "Basic Settings")
advanced = RadioSettingGroup("advanced", "Advanced Settings")
group = RadioSettingGroup("top", "All Settings", basic, advanced)
rs = RadioSetting("squelch", "Carrier Squelch Level",
RadioSettingValueInteger(0, 9, _settings.squelch))
basic.append(rs)
rs = RadioSetting("save", "Battery Saver",
RadioSettingValueInteger(0, 4, _settings.save))
basic.append(rs)
rs = RadioSetting("abr", "Backlight",
RadioSettingValueBoolean(_settings.abr))
basic.append(rs)
rs = RadioSetting("tdr", "Dual Watch (BDR)",
RadioSettingValueBoolean(_settings.tdr))
advanced.append(rs)
rs = RadioSetting("tdrab", "Dual Watch TX Priority",
RadioSettingValueList(uv5r.TDRAB_LIST,
uv5r.TDRAB_LIST[_settings.tdrab]))
advanced.append(rs)
rs = RadioSetting("alarm", "Alarm",
RadioSettingValueBoolean(_settings.alarm))
advanced.append(rs)
rs = RadioSetting("beep", "Beep",
RadioSettingValueBoolean(_settings.beep))
basic.append(rs)
rs = RadioSetting("timeout", "Timeout Timer",
RadioSettingValueList(uv5r.TIMEOUT_LIST,
uv5r.TIMEOUT_LIST[_settings.timeout]))
basic.append(rs)
rs = RadioSetting("screv", "Scan Resume",
RadioSettingValueList(uv5r.RESUME_LIST,
uv5r.RESUME_LIST[_settings.screv]))
advanced.append(rs)
rs = RadioSetting("mdfa", "Display Mode (A)",
RadioSettingValueList(uv5r.MODE_LIST,
uv5r.MODE_LIST[_settings.mdfa]))
basic.append(rs)
rs = RadioSetting("mdfb", "Display Mode (B)",
RadioSettingValueList(uv5r.MODE_LIST,
uv5r.MODE_LIST[_settings.mdfb]))
basic.append(rs)
rs = RadioSetting("bcl", "Busy Channel Lockout",
RadioSettingValueBoolean(_settings.bcl))
advanced.append(rs)
rs = RadioSetting("autolk", "Automatic Key Lock",
RadioSettingValueBoolean(_settings.autolk))
advanced.append(rs)
rs = RadioSetting("fmradio", "Broadcast FM Radio",
RadioSettingValueBoolean(_settings.fmradio))
advanced.append(rs)
rs = RadioSetting("wtled", "Standby LED Color",
RadioSettingValueList(COLOR_LIST,
COLOR_LIST[_settings.wtled]))
basic.append(rs)
rs = RadioSetting("rxled", "RX LED Color",
RadioSettingValueList(COLOR_LIST,
COLOR_LIST[_settings.rxled]))
basic.append(rs)
rs = RadioSetting("txled", "TX LED Color",
RadioSettingValueList(COLOR_LIST,
COLOR_LIST[_settings.txled]))
basic.append(rs)
rs = RadioSetting("reset", "RESET Menu",
RadioSettingValueBoolean(_settings.reset))
advanced.append(rs)
rs = RadioSetting("menu", "All Menus",
RadioSettingValueBoolean(_settings.menu))
advanced.append(rs)
if len(self._mmap.get_packed()) == 0x1808:
# Old image, without aux block
return group
other = RadioSettingGroup("other", "Other Settings")
group.append(other)
def _filter(name):
filtered = ""
for char in str(name):
if char in chirp_common.CHARSET_ASCII:
filtered += char
else:
filtered += " "
return filtered
_msg = self._memobj.poweron_msg
rs = RadioSetting("poweron_msg.line1", "Power-On Message 1",
RadioSettingValueString(0, 7, _filter(_msg.line1)))
other.append(rs)
rs = RadioSetting("poweron_msg.line2", "Power-On Message 2",
RadioSettingValueString(0, 7, _filter(_msg.line2)))
other.append(rs)
limit = "limits"
vhf_limit = getattr(self._memobj, limit).vhf
rs = RadioSetting("%s.vhf.lower" % limit, "VHF Lower Limit (MHz)",
RadioSettingValueInteger(1, 1000,
vhf_limit.lower))
other.append(rs)
rs = RadioSetting("%s.vhf.upper" % limit, "VHF Upper Limit (MHz)",
RadioSettingValueInteger(1, 1000,
vhf_limit.upper))
other.append(rs)
rs = RadioSetting("%s.vhf.enable" % limit, "VHF TX Enabled",
RadioSettingValueBoolean(vhf_limit.enable))
other.append(rs)
uhf_limit = getattr(self._memobj, limit).uhf
rs = RadioSetting("%s.uhf.lower" % limit, "UHF Lower Limit (MHz)",
RadioSettingValueInteger(1, 1000,
uhf_limit.lower))
other.append(rs)
rs = RadioSetting("%s.uhf.upper" % limit, "UHF Upper Limit (MHz)",
RadioSettingValueInteger(1, 1000,
uhf_limit.upper))
other.append(rs)
rs = RadioSetting("%s.uhf.enable" % limit, "UHF TX Enabled",
RadioSettingValueBoolean(uhf_limit.enable))
other.append(rs)
workmode = RadioSettingGroup("workmode", "Work Mode Settings")
group.append(workmode)
options = ["A", "B"]
rs = RadioSetting("displayab", "Display Selected",
RadioSettingValueList(options,
options[_settings.displayab]))
workmode.append(rs)
options = ["Frequency", "Channel"]
rs = RadioSetting("workmode", "VFO/MR Mode",
RadioSettingValueList(options,
options[_settings.workmode]))
workmode.append(rs)
rs = RadioSetting("keylock", "Keypad Lock",
RadioSettingValueBoolean(_settings.keylock))
workmode.append(rs)
_mrcna = self._memobj.wmchannel.mrcha
rs = RadioSetting("wmchannel.mrcha", "MR A Channel",
RadioSettingValueInteger(0, 127, _mrcna))
workmode.append(rs)
_mrcnb = self._memobj.wmchannel.mrchb
rs = RadioSetting("wmchannel.mrchb", "MR B Channel",
RadioSettingValueInteger(0, 127, _mrcnb))
workmode.append(rs)
def convert_bytes_to_freq(bytes):
real_freq = 0
for byte in bytes:
real_freq = (real_freq * 10) + byte
return chirp_common.format_freq(real_freq * 10)
def my_validate(value):
value = chirp_common.parse_freq(value)
if 17400000 <= value and value < 40000000:
raise InvalidValueError("Can't be between 174.00000-400.00000")
return chirp_common.format_freq(value)
def apply_freq(setting, obj):
value = chirp_common.parse_freq(str(setting.value)) / 10
obj.band = value >= 40000000
for i in range(7, -1, -1):
obj.freq[i] = value % 10
value /= 10
val1a = RadioSettingValueString(0, 10,
convert_bytes_to_freq(self._memobj.vfoa.freq))
val1a.set_validate_callback(my_validate)
rs = RadioSetting("vfoa.freq", "VFO A Frequency", val1a)
rs.set_apply_callback(apply_freq, self._memobj.vfoa)
workmode.append(rs)
val1b = RadioSettingValueString(0, 10,
convert_bytes_to_freq(self._memobj.vfob.freq))
val1b.set_validate_callback(my_validate)
rs = RadioSetting("vfob.freq", "VFO B Frequency", val1b)
rs.set_apply_callback(apply_freq, self._memobj.vfob)
workmode.append(rs)
options = ["Off", "+", "-"]
rs = RadioSetting("vfoa.sftd", "VFO A Shift",
RadioSettingValueList(options,
options[self._memobj.vfoa.sftd]))
workmode.append(rs)
rs = RadioSetting("vfob.sftd", "VFO B Shift",
RadioSettingValueList(options,
options[self._memobj.vfob.sftd]))
workmode.append(rs)
def convert_bytes_to_offset(bytes):
real_offset = 0
for byte in bytes:
real_offset = (real_offset * 10) + byte
return chirp_common.format_freq(real_offset * 10000)
def apply_offset(setting, obj):
value = chirp_common.parse_freq(str(setting.value)) / 10000
for i in range(3, -1, -1):
obj.offset[i] = value % 10
value /= 10
val1a = RadioSettingValueString(0, 10,
convert_bytes_to_offset(self._memobj.vfoa.offset))
rs = RadioSetting("vfoa.offset", "VFO A Offset (0.00-69.95)", val1a)
rs.set_apply_callback(apply_offset, self._memobj.vfoa)
workmode.append(rs)
val1b = RadioSettingValueString(0, 10,
convert_bytes_to_offset(self._memobj.vfob.offset))
rs = RadioSetting("vfob.offset", "VFO B Offset (0.00-69.95)", val1b)
rs.set_apply_callback(apply_offset, self._memobj.vfob)
workmode.append(rs)
options = ["High", "Low"]
rs = RadioSetting("vfoa.txpower", "VFO A Power",
RadioSettingValueList(options,
options[self._memobj.vfoa.txpower]))
workmode.append(rs)
rs = RadioSetting("vfob.txpower", "VFO B Power",
RadioSettingValueList(options,
options[self._memobj.vfob.txpower]))
workmode.append(rs)
options = ["Wide", "Narrow"]
rs = RadioSetting("vfoa.widenarr", "VFO A Bandwidth",
RadioSettingValueList(options,
options[self._memobj.vfoa.widenarr]))
workmode.append(rs)
rs = RadioSetting("vfob.widenarr", "VFO B Bandwidth",
RadioSettingValueList(options,
options[self._memobj.vfob.widenarr]))
workmode.append(rs)
options = ["%s" % x for x in range(1, 16)]
rs = RadioSetting("vfoa.scode", "VFO A PTT-ID",
RadioSettingValueList(options,
options[self._memobj.vfoa.scode]))
workmode.append(rs)
rs = RadioSetting("vfob.scode", "VFO B PTT-ID",
RadioSettingValueList(options,
options[self._memobj.vfob.scode]))
workmode.append(rs)
rs = RadioSetting("vfoa.step", "VFO A Tuning Step",
RadioSettingValueList(uv5r.STEP291_LIST,
uv5r.STEP291_LIST[self._memobj.vfoa.step]))
workmode.append(rs)
rs = RadioSetting("vfob.step", "VFO B Tuning Step",
RadioSettingValueList(uv5r.STEP291_LIST,
uv5r.STEP291_LIST[self._memobj.vfob.step]))
workmode.append(rs)
fm_preset = RadioSettingGroup("fm_preset", "FM Radio Preset")
group.append(fm_preset)
preset = self._memobj.fm_preset / 10.0 + 87
rs = RadioSetting("fm_preset", "FM Preset(MHz)",
RadioSettingValueFloat(87, 107.5, preset, 0.1, 1))
fm_preset.append(rs)
dtmf = RadioSettingGroup("dtmf", "DTMF Settings")
group.append(dtmf)
dtmfchars = "0123456789 *#ABCD"
for i in range(0, 15):
_codeobj = self._memobj.pttid[i].code
_code = "".join([dtmfchars[x] for x in _codeobj if int(x) < 0x1F])
val = RadioSettingValueString(0, 5, _code, False)
val.set_charset(dtmfchars)
rs = RadioSetting("pttid/%i.code" % i, "PTT ID Code %i" % (i + 1), val)
def apply_code(setting, obj):
code = []
for j in range(0, 5):
try:
code.append(dtmfchars.index(str(setting.value)[j]))
except IndexError:
code.append(0xFF)
obj.code = code
rs.set_apply_callback(apply_code, self._memobj.pttid[i])
dtmf.append(rs)
_codeobj = self._memobj.ani.code
_code = "".join([dtmfchars[x] for x in _codeobj if int(x) < 0x1F])
val = RadioSettingValueString(0, 5, _code, False)
val.set_charset(dtmfchars)
rs = RadioSetting("ani.code", "ANI Code", val)
def apply_code(setting, obj):
code = []
for j in range(0, 5):
try:
code.append(dtmfchars.index(str(setting.value)[j]))
except IndexError:
code.append(0xFF)
obj.code = code
rs.set_apply_callback(apply_code, self._memobj.ani)
dtmf.append(rs)
options = ["Off", "BOT", "EOT", "Both"]
rs = RadioSetting("ani.aniid", "ANI ID",
RadioSettingValueList(options,
options[self._memobj.ani.aniid]))
dtmf.append(rs)
_codeobj = self._memobj.ani.alarmcode
_code = "".join([dtmfchars[x] for x in _codeobj if int(x) < 0x1F])
val = RadioSettingValueString(0, 5, _code, False)
val.set_charset(dtmfchars)
rs = RadioSetting("ani.alarmcode", "Alarm Code", val)
def apply_code(setting, obj):
alarmcode = []
for j in range(5):
try:
alarmcode.append(dtmfchars.index(str(setting.value)[j]))
except IndexError:
alarmcode.append(0xFF)
obj.alarmcode = alarmcode
rs.set_apply_callback(apply_code, self._memobj.ani)
dtmf.append(rs)
rs = RadioSetting("dtmfst", "DTMF Sidetone",
RadioSettingValueList(uv5r.DTMFST_LIST,
uv5r.DTMFST_LIST[_settings.dtmfst]))
dtmf.append(rs)
rs = RadioSetting("ani.dtmfon", "DTMF Speed (on)",
RadioSettingValueList(uv5r.DTMFSPEED_LIST,
uv5r.DTMFSPEED_LIST[self._memobj.ani.dtmfon]))
dtmf.append(rs)
rs = RadioSetting("ani.dtmfoff", "DTMF Speed (off)",
RadioSettingValueList(uv5r.DTMFSPEED_LIST,
uv5r.DTMFSPEED_LIST[self._memobj.ani.dtmfoff]))
dtmf.append(rs)
return group
def get_settings(self):
_settings = self._memobj.settings
basic = RadioSettingGroup("basic", "Basic")
cw = RadioSettingGroup("cw", "CW")
packet = RadioSettingGroup("packet", "Digital & packet")
panel = RadioSettingGroup("panel", "Panel settings")
extended = RadioSettingGroup("extended", "Extended")
panelcontr = RadioSettingGroup("panelcontr", "Panel controls")
top = RadioSettingGroup("top", "All Settings", basic, cw, packet,
panelcontr, panel, extended)
rs = RadioSetting("extended_menu", "Extended menu",
RadioSettingValueBoolean(_settings.extended_menu))
extended.append(rs)
rs = RadioSetting("ars_144", "144MHz ARS",
RadioSettingValueBoolean(_settings.ars_144))
basic.append(rs)
rs = RadioSetting("ars_430", "430MHz ARS",
RadioSettingValueBoolean(_settings.ars_430))
basic.append(rs)
options = ["enable", "disable"]
rs = RadioSetting("disable_amfm_dial", "AM&FM Dial",
RadioSettingValueList(options,
options[_settings.disable_amfm_dial]))
panel.append(rs)
rs = RadioSetting("am_mic", "AM mic gain",
RadioSettingValueInteger(0, 100, _settings.am_mic))
basic.append(rs)
options = ["OFF", "1h", "2h", "3h", "4h", "5h", "6h"]
rs = RadioSetting("apo_time", "APO time",
RadioSettingValueList(options,
options[_settings.apo_time]))
basic.append(rs)
options = ["OFF", "Range", "All"]
rs = RadioSetting("arts_beep", "ARTS beep",
RadioSettingValueList(options,
options[_settings.arts_beep]))
basic.append(rs)
rs = RadioSetting("arts_id", "ARTS ID",
RadioSettingValueBoolean(_settings.arts_id))
extended.append(rs)
s = RadioSettingValueString(0, 10,
''.join([self._CALLSIGN_CHARSET[x] for x in
self._memobj.arts_idw]))
s.set_charset(self._CALLSIGN_CHARSET)
rs = RadioSetting("arts_idw", "ARTS IDW", s)
extended.append(rs)
s = RadioSettingValueString(0, 40,
''.join([self._BEACON_CHARSET[x] for x in
self._memobj.beacon_text1]))
s.set_charset(self._BEACON_CHARSET)
rs = RadioSetting("beacon_text1", "Beacon text1", s)
extended.append(rs)
s = RadioSettingValueString(0, 40,
''.join([self._BEACON_CHARSET[x] for x in
self._memobj.beacon_text2]))
s.set_charset(self._BEACON_CHARSET)
rs = RadioSetting("beacon_text2", "Beacon text2", s)
extended.append(rs)
s = RadioSettingValueString(0, 40,
''.join([self._BEACON_CHARSET[x] for x in
self._memobj.beacon_text3]))
s.set_charset(self._BEACON_CHARSET)
rs = RadioSetting("beacon_text3", "Beacon text3", s)
extended.append(rs)
options = ["OFF"]+["%i sec" % i for i in range(1,256)]
rs = RadioSetting("beacon_time", "Beacon time",
RadioSettingValueList(options,
options[_settings.beacon_time]))
extended.append(rs)
options = ["440Hz", "880Hz", "1760Hz"]
rs = RadioSetting("beep_tone", "Beep tone",
RadioSettingValueList(options,
options[_settings.beep_tone]))
panel.append(rs)
rs = RadioSetting("beep_vol", "Beep volume",
RadioSettingValueInteger(0, 100, _settings.beep_vol))
panel.append(rs)
rs = RadioSetting("r_lsb_car", "LSB Rx carrier point (*10 Hz)",
RadioSettingValueInteger(-30, 30, _settings.r_lsb_car))
extended.append(rs)
rs = RadioSetting("r_usb_car", "USB Rx carrier point (*10 Hz)",
RadioSettingValueInteger(-30, 30, _settings.r_usb_car))
extended.append(rs)
rs = RadioSetting("t_lsb_car", "LSB Tx carrier point (*10 Hz)",
RadioSettingValueInteger(-30, 30, _settings.t_lsb_car))
extended.append(rs)
rs = RadioSetting("t_usb_car", "USB Tx carrier point (*10 Hz)",
RadioSettingValueInteger(-30, 30, _settings.t_usb_car))
extended.append(rs)
options = ["4800", "9600", "38400"]
rs = RadioSetting("cat_rate", "CAT rate",
RadioSettingValueList(options,
options[_settings.cat_rate]))
basic.append(rs)
options = ["CAT", "Linear", "Tuner"]
rs = RadioSetting("cat_lin_tun", "CAT/LIN/TUN selection",
RadioSettingValueList(options,
options[_settings.cat_lin_tun]))
extended.append(rs)
options = ["MAIN", "VFO/MEM", "CLAR"] # TODO test the 3 options on non D radio
# which have only SEL and MAIN
rs = RadioSetting("clar_dial_sel", "Clarifier dial selection",
RadioSettingValueList(options,
options[_settings.clar_dial_sel]))
panel.append(rs)
rs = RadioSetting("cw_auto_mode", "CW Automatic mode",
RadioSettingValueBoolean(_settings.cw_auto_mode))
cw.append(rs)
options = ["USB", "LSB", "AUTO"]
rs = RadioSetting("cw_bfo", "CW BFO",
RadioSettingValueList(options,
options[_settings.cw_bfo]))
cw.append(rs)
options = ["FULL"]+["%i ms" % (i*10) for i in range(3,301)]
val = (_settings.cw_delay + _settings.cw_delay_hi * 256) - 2
rs = RadioSetting("cw_delay", "CW delay",
RadioSettingValueList(options,
options[val]))
cw.append(rs)
options = ["Normal", "Reverse"]
rs = RadioSetting("cw_key_rev", "CW key reverse",
RadioSettingValueList(options,
options[_settings.cw_key_rev]))
cw.append(rs)
rs = RadioSetting("cw_paddle", "CW paddle",
RadioSettingValueBoolean(_settings.cw_paddle))
cw.append(rs)
options = ["%i Hz" % i for i in range(400,801,100)]
rs = RadioSetting("cw_pitch", "CW pitch",
RadioSettingValueList(options,
options[_settings.cw_pitch]))
cw.append(rs)
options = ["%i ms" % i for i in range(5,31,5)]
rs = RadioSetting("cw_qsk", "CW QSK",
RadioSettingValueList(options,
options[_settings.cw_qsk]))
cw.append(rs)
rs = RadioSetting("cw_sidetone", "CW sidetone volume",
RadioSettingValueInteger(0, 100, _settings.cw_sidetone))
cw.append(rs)
options = ["%i wpm" % i for i in range(4,61)]
rs = RadioSetting("cw_speed", "CW speed",
RadioSettingValueList(options,
options[_settings.cw_speed]))
cw.append(rs)
options = ["Numeric", "Alphabet", "AlphaNumeric"]
rs = RadioSetting("cw_training", "CW trainig",
RadioSettingValueList(options,
options[_settings.cw_training]))
cw.append(rs)
options = ["1:%1.1f" % (i/10) for i in range(25,46,1)]
rs = RadioSetting("cw_weight", "CW weight",
RadioSettingValueList(options,
options[_settings.cw_weight]))
cw.append(rs)
options = ["Tn-Rn", "Tn-Riv", "Tiv-Rn", "Tiv-Riv"]
rs = RadioSetting("dcs_inv", "DCS inv",
RadioSettingValueList(options,
options[_settings.dcs_inv]))
extended.append(rs)
options = ["Fine", "Coarse"]
rs = RadioSetting("dial_step", "Dial step",
RadioSettingValueList(options,
options[_settings.dial_step]))
panel.append(rs)
rs = RadioSetting("dig_disp", "Dig disp (*10 Hz)",
RadioSettingValueInteger(-300, 300, _settings.dig_disp))
packet.append(rs)
rs = RadioSetting("dig_mic", "Dig gain",
RadioSettingValueInteger(0, 100, _settings.dig_mic))
packet.append(rs)
options = ["RTTYL", "RTTYU", "PSK31-L", "PSK31-U", "USER-L", "USER-U"]
rs = RadioSetting("dig_mode", "Dig mode",
RadioSettingValueList(options,
options[_settings.dig_mode]))
packet.append(rs)
rs = RadioSetting("dig_shift", "Dig shift (*10 Hz)",
RadioSettingValueInteger(-300, 300, _settings.dig_shift))
packet.append(rs)
rs = RadioSetting("dig_vox", "Dig vox",
RadioSettingValueInteger(0, 100, _settings.dig_vox))
packet.append(rs)
options = ["ARTS", "BAND", "FIX", "MEMGRP", "MODE", "MTR", "VFO"]
rs = RadioSetting("disp_color", "Display color mode",
RadioSettingValueList(options,
options[_settings.disp_color]))
panel.append(rs)
rs = RadioSetting("disp_color_arts", "Display color ARTS set",
RadioSettingValueInteger(0, 1,_settings.disp_color_arts))
panel.append(rs)
rs = RadioSetting("disp_color_band", "Display color band set",
RadioSettingValueInteger(0, 1,_settings.disp_color_band))
panel.append(rs)
rs = RadioSetting("disp_color_memgrp", "Display color memory group set",
RadioSettingValueInteger(0, 1,_settings.disp_color_memgrp))
panel.append(rs)
rs = RadioSetting("disp_color_mode", "Display color mode set",
RadioSettingValueInteger(0, 1,_settings.disp_color_mode))
panel.append(rs)
rs = RadioSetting("disp_color_mtr", "Display color meter set",
RadioSettingValueInteger(0, 1,_settings.disp_color_mtr))
panel.append(rs)
rs = RadioSetting("disp_color_vfo", "Display color VFO set",
RadioSettingValueInteger(0, 1,_settings.disp_color_vfo))
panel.append(rs)
rs = RadioSetting("disp_color_fix", "Display color fix set",
RadioSettingValueInteger(1, 32,_settings.disp_color_fix+1))
panel.append(rs)
rs = RadioSetting("disp_contrast", "Contrast",
RadioSettingValueInteger(3, 15,_settings.disp_contrast+2))
panel.append(rs)
rs = RadioSetting("disp_intensity", "Intensity",
RadioSettingValueInteger(1, 3,_settings.disp_intensity))
panel.append(rs)
options = ["OFF", "Auto1", "Auto2", "ON"]
rs = RadioSetting("disp_mode", "Display backlight mode",
RadioSettingValueList(options,
options[_settings.disp_mode]))
panel.append(rs)
options = ["60Hz", "120Hz", "240Hz"]
rs = RadioSetting("dsp_bpf", "Dsp band pass filter",
RadioSettingValueList(options,
options[_settings.dsp_bpf]))
cw.append(rs)
options = ["100Hz", "160Hz", "220Hz", "280Hz", "340Hz", "400Hz", "460Hz", "520Hz",
"580Hz", "640Hz", "720Hz", "760Hz", "820Hz", "880Hz", "940Hz", "1000Hz"]
rs = RadioSetting("dsp_hpf", "Dsp hi pass filter cut off",
RadioSettingValueList(options,
options[_settings.dsp_hpf]))
basic.append(rs)
options = ["1000Hz", "1160Hz", "1320Hz", "1480Hz", "1650Hz", "1800Hz", "1970Hz", "2130Hz",
"2290Hz", "2450Hz", "2610Hz", "2770Hz", "2940Hz", "3100Hz", "3260Hz", "3420Hz",
"3580Hz", "3740Hz", "3900Hz", "4060Hz", "4230Hz", "4390Hz", "4550Hz", "4710Hz",
"4870Hz", "5030Hz", "5190Hz", "5390Hz", "5520Hz", "5680Hz", "5840Hz", "6000Hz"]
rs = RadioSetting("dsp_lpf", "Dsp low pass filter cut off",
RadioSettingValueList(options,
options[_settings.dsp_lpf]))
basic.append(rs)
options = ["OFF", "LPF", "HPF", "BOTH"]
rs = RadioSetting("dsp_mic_eq", "Dsp mic equalization",
RadioSettingValueList(options,
options[_settings.dsp_mic_eq]))
basic.append(rs)
rs = RadioSetting("dsp_nr", "DSP noise reduction level",
RadioSettingValueInteger(1, 16, _settings.dsp_nr+1))
basic.append(rs)
# emergency only for US model
rs = RadioSetting("fm_mic", "FM mic gain",
RadioSettingValueInteger(0, 100, _settings.fm_mic))
basic.append(rs)
rs = RadioSetting("home_vfo", "Enable HOME to VFO moving",
RadioSettingValueBoolean(_settings.home_vfo))
panel.append(rs)
options = ["Dial", "Freq", "Panel", "All"]
rs = RadioSetting("lock_mode", "Lock mode",
RadioSettingValueList(options,
options[_settings.lock_mode]))
panel.append(rs)
rs = RadioSetting("mem_group", "Mem group",
RadioSettingValueBoolean(_settings.mem_group))
basic.append(rs)
options = ["CW SIDETONE", "CW SPEED", "MHz/MEM GRP", "MIC GAIN",
"NB LEVEL", "RF POWER", "STEP"]
rs = RadioSetting("mem_vfo_dial_mode", "Mem/VFO dial mode",
RadioSettingValueList(options,
options[_settings.mem_vfo_dial_mode]))
panel.append(rs)
rs = RadioSetting("mic_scan", "Mic scan",
RadioSettingValueBoolean(_settings.mic_scan))
basic.append(rs)
options = ["NOR", "RMT", "CAT"]
rs = RadioSetting("mic_sel", "Mic selection",
RadioSettingValueList(options,
options[_settings.mic_sel]))
extended.append(rs)
options = ["SIG", "CTR", "VLT", "N/A", "FS", "OFF"]
rs = RadioSetting("mtr_arx_sel", "Meter receive selection",
RadioSettingValueList(options,
options[_settings.mtr_arx_sel]))
extended.append(rs)
options = ["PWR", "ALC", "MOD", "SWR", "VLT", "N/A", "OFF"]
rs = RadioSetting("mtr_atx_sel", "Meter transmit selection",
RadioSettingValueList(options,
options[_settings.mtr_atx_sel]))
extended.append(rs)
rs = RadioSetting("mtr_peak_hold", "Meter peak hold",
RadioSettingValueBoolean(_settings.mtr_peak_hold))
extended.append(rs)
rs = RadioSetting("nb_level", "Noise blanking level",
RadioSettingValueInteger(0, 100, _settings.nb_level))
basic.append(rs)
s = RadioSettingValueString(0, 4,
''.join([self._CALLSIGN_CHARSET[x] for x in
self._memobj.op_filter1_name]))
s.set_charset(self._CALLSIGN_CHARSET)
rs = RadioSetting("op_filter1_name", "Optional filter1 name", s)
extended.append(rs)
s = RadioSettingValueString(0, 4,
''.join([self._CALLSIGN_CHARSET[x] for x in
self._memobj.op_filter2_name]))
s.set_charset(self._CALLSIGN_CHARSET)
rs = RadioSetting("op_filter2_name", "Optional filter2 name", s)
extended.append(rs)
rs = RadioSetting("pg_a", "Programmable key MFq:A",
RadioSettingValueList(self.PROGRAMMABLEOPTIONS,
self.PROGRAMMABLEOPTIONS[_settings.pg_a]))
extended.append(rs)
rs = RadioSetting("pg_b", "Programmable key MFq:B",
RadioSettingValueList(self.PROGRAMMABLEOPTIONS,
self.PROGRAMMABLEOPTIONS[_settings.pg_b]))
extended.append(rs)
rs = RadioSetting("pg_c", "Programmable key MFq:C",
RadioSettingValueList(self.PROGRAMMABLEOPTIONS,
self.PROGRAMMABLEOPTIONS[_settings.pg_c]))
extended.append(rs)
rs = RadioSetting("pg_acc", "Programmable mic key ACC",
RadioSettingValueList(self.PROGRAMMABLEOPTIONS,
self.PROGRAMMABLEOPTIONS[_settings.pg_acc]))
extended.append(rs)
rs = RadioSetting("pg_p1", "Programmable mic key P1",
RadioSettingValueList(self.PROGRAMMABLEOPTIONS,
self.PROGRAMMABLEOPTIONS[_settings.pg_p1]))
extended.append(rs)
rs = RadioSetting("pg_p2", "Programmable mic key P2",
RadioSettingValueList(self.PROGRAMMABLEOPTIONS,
self.PROGRAMMABLEOPTIONS[_settings.pg_p2]))
extended.append(rs)
rs = RadioSetting("pkt1200", "Packet 1200 gain level",
RadioSettingValueInteger(0, 100, _settings.pkt1200))
packet.append(rs)
rs = RadioSetting("pkt9600", "Packet 9600 gain level",
RadioSettingValueInteger(0, 100, _settings.pkt9600))
packet.append(rs)
options = ["1200", "9600"]
rs = RadioSetting("pkt_rate", "Packet rate",
RadioSettingValueList(options,
options[_settings.pkt_rate]))
packet.append(rs)
rs = RadioSetting("proc_level", "Proc level",
RadioSettingValueInteger(0, 100, _settings.proc_level))
basic.append(rs)
rs = RadioSetting("rf_power_hf", "Rf power set HF",
RadioSettingValueInteger(5, 100, _settings.rf_power_hf))
basic.append(rs)
rs = RadioSetting("rf_power_6m", "Rf power set 6m",
RadioSettingValueInteger(5, 100, _settings.rf_power_6m))
basic.append(rs)
rs = RadioSetting("rf_power_vhf", "Rf power set VHF",
RadioSettingValueInteger(5, 50, _settings.rf_power_vhf))
basic.append(rs)
rs = RadioSetting("rf_power_uhf", "Rf power set UHF",
RadioSettingValueInteger(2, 20, _settings.rf_power_uhf))
basic.append(rs)
options = ["TIME", "BUSY", "STOP"]
rs = RadioSetting("scan_mode", "Scan mode",
RadioSettingValueList(options,
options[_settings.scan_mode]))
basic.append(rs)
rs = RadioSetting("scan_resume", "Scan resume",
RadioSettingValueInteger(1, 10, _settings.scan_resume))
basic.append(rs)
rs = RadioSetting("split_tone", "Split tone enable",
RadioSettingValueBoolean(_settings.split_tone))
extended.append(rs)
options = ["RF-Gain", "Squelch"]
rs = RadioSetting("sql_rf_gain", "Squelch/RF-Gain",
RadioSettingValueList(options,
options[_settings.sql_rf_gain]))
panel.append(rs)
rs = RadioSetting("ssb_mic", "SSB Mic gain",
RadioSettingValueInteger(0, 100, _settings.ssb_mic))
basic.append(rs)
options = ["Off"]+["%i" % i for i in range(1, 21)]
rs = RadioSetting("tot_time", "Time-out timer",
RadioSettingValueList(options,
options[_settings.tot_time]))
basic.append(rs)
options = ["OFF", "ATAS(HF)", "ATAS(HF&50)", "ATAS(ALL)", "TUNER"]
rs = RadioSetting("tuner_atas", "Tuner/ATAS device",
RadioSettingValueList(options,
options[_settings.tuner_atas]))
extended.append(rs)
rs = RadioSetting("tx_if_filter", "Transmit IF filter",
RadioSettingValueList(self.FILTERS,
self.FILTERS[_settings.tx_if_filter]))
basic.append(rs)
rs = RadioSetting("vox_delay", "VOX delay (*100 ms)",
RadioSettingValueInteger(1, 30, _settings.vox_delay))
basic.append(rs)
rs = RadioSetting("vox_gain", "VOX Gain",
RadioSettingValueInteger(1, 100, _settings.vox_gain))
basic.append(rs)
rs = RadioSetting("xvtr_a", "Xvtr A displacement",
RadioSettingValueInteger(-4294967295, 4294967295, self._memobj.xvtr_a_offset * (-1 if _settings.xvtr_a_negative else 1)))
extended.append(rs)
rs = RadioSetting("xvtr_b", "Xvtr B displacement",
RadioSettingValueInteger(-4294967295, 4294967295, self._memobj.xvtr_b_offset * (-1 if _settings.xvtr_b_negative else 1)))
extended.append(rs)
options = ["OFF", "XVTR A", "XVTR B"]
rs = RadioSetting("xvtr_sel", "Transverter function selection",
RadioSettingValueList(options,
options[_settings.xvtr_sel]))
extended.append(rs)
rs = RadioSetting("disp", "Display large",
RadioSettingValueBoolean(_settings.disp))
panel.append(rs)
rs = RadioSetting("nb", "Noise blanker",
RadioSettingValueBoolean(_settings.nb))
panelcontr.append(rs)
options = ["Auto", "Fast", "Slow", "Off"]
rs = RadioSetting("agc", "AGC",
RadioSettingValueList(options,
options[_settings.agc]))
panelcontr.append(rs)
options = ["PWR", "ALC", "SWR", "MOD"]
rs = RadioSetting("pwr_meter_mode", "Power meter mode",
RadioSettingValueList(options,
options[_settings.pwr_meter_mode]))
panelcontr.append(rs)
rs = RadioSetting("vox", "Vox",
RadioSettingValueBoolean(_settings.vox))
panelcontr.append(rs)
rs = RadioSetting("bk", "Semi break-in",
RadioSettingValueBoolean(_settings.bk))
cw.append(rs)
rs = RadioSetting("kyr", "Keyer",
RadioSettingValueBoolean(_settings.kyr))
cw.append(rs)
options = ["enabled", "disabled"]
rs = RadioSetting("fst", "Fast",
RadioSettingValueList(options,
options[_settings.fst]))
panelcontr.append(rs)
options = ["enabled", "disabled"]
rs = RadioSetting("lock", "Lock",
RadioSettingValueList(options,
options[_settings.lock]))
panelcontr.append(rs)
rs = RadioSetting("scope_peakhold", "Scope max hold",
RadioSettingValueBoolean(_settings.scope_peakhold))
panelcontr.append(rs)
options = ["21", "31", "127"]
rs = RadioSetting("scope_width", "Scope width (channels)",
RadioSettingValueList(options,
options[_settings.scope_width]))
panelcontr.append(rs)
rs = RadioSetting("proc", "Speech processor",
RadioSettingValueBoolean(_settings.proc))
panelcontr.append(rs)
return top
def get_settings(self):
_settings = self._memobj.settings
basic = RadioSettingGroup("basic", "Basic Settings")
group = RadioSettings(basic)
options = ["Time", "Carrier", "Search"]
rs = RadioSetting(
"scantype", "Scan Type",
RadioSettingValueList(options, options[_settings.scantype]))
basic.append(rs)
options = ["Off"] + ["%s min" % x for x in range(1, 8)]
rs = RadioSetting(
"timeout", "Time Out Timer",
RadioSettingValueList(options, options[_settings.timeout]))
basic.append(rs)
options = ["A", "B"]
rs = RadioSetting(
"freqmode_ab", "Frequency Mode",
RadioSettingValueList(options, options[_settings.freqmode_ab]))
basic.append(rs)
options = ["Frequency Mode", "Channel Mode"]
rs = RadioSetting(
"workmode_a", "Radio Work Mode(A)",
RadioSettingValueList(options, options[_settings.workmode_a]))
basic.append(rs)
rs = RadioSetting(
"workmode_b", "Radio Work Mode(B)",
RadioSettingValueList(options, options[_settings.workmode_b]))
basic.append(rs)
options = ["Frequency", "Name", "Channel"]
rs = RadioSetting(
"mdf_a", "Display Format(F1)",
RadioSettingValueList(options, options[_settings.mdf_a]))
basic.append(rs)
rs = RadioSetting(
"mdf_b", "Display Format(F2)",
RadioSettingValueList(options, options[_settings.mdf_b]))
basic.append(rs)
rs = RadioSetting(
"mem_chan_a", "Mem Channel (A)",
RadioSettingValueInteger(1, 99, _settings.mem_chan_a))
basic.append(rs)
rs = RadioSetting(
"mem_chan_b", "Mem Channel (B)",
RadioSettingValueInteger(1, 99, _settings.mem_chan_b))
basic.append(rs)
options = ["Off", "BOT", "EOT", "Both"]
rs = RadioSetting(
"pttid", "PTT-ID",
RadioSettingValueList(options, options[_settings.pttid]))
basic.append(rs)
dtmfchars = "0123456789ABCD*#"
_codeobj = self._memobj.pttid.code
_code = "".join([dtmfchars[x] for x in _codeobj if int(x) < 0x1F])
val = RadioSettingValueString(0, 6, _code, False)
val.set_charset(dtmfchars)
rs = RadioSetting("pttid.code", "PTT-ID Code", val)
def apply_code(setting, obj):
code = []
for j in range(0, 6):
try:
code.append(dtmfchars.index(str(setting.value)[j]))
except IndexError:
code.append(0xFF)
obj.code = code
rs.set_apply_callback(apply_code, self._memobj.pttid)
basic.append(rs)
rs = RadioSetting("squelch", "Squelch Level",
RadioSettingValueInteger(0, 9, _settings.squelch))
basic.append(rs)
rs = RadioSetting("vox", "VOX Level",
RadioSettingValueInteger(0, 9, _settings.vox))
basic.append(rs)
options = ["Frequency Mode", "Channel Mode"]
rs = RadioSetting(
"workmode_fm", "FM Work Mode",
RadioSettingValueList(options, options[_settings.workmode_fm]))
basic.append(rs)
options = ["Current Frequency", "F1 Frequency", "F2 Frequency"]
rs = RadioSetting(
"txtdr", "Dual Standby TX Priority",
RadioSettingValueList(options, options[_settings.txtdr]))
basic.append(rs)
options = ["English", "Chinese"]
rs = RadioSetting(
"language", "Language",
RadioSettingValueList(options, options[_settings.language]))
basic.append(rs)
rs = RadioSetting("tdr", "Dual Standby",
RadioSettingValueBoolean(_settings.tdr))
basic.append(rs)
rs = RadioSetting("roger", "Roger Beep",
RadioSettingValueBoolean(_settings.roger))
basic.append(rs)
rs = RadioSetting("backlight", "Backlight",
RadioSettingValueBoolean(_settings.backlight))
basic.append(rs)
rs = RadioSetting("save_funct", "Save Mode",
RadioSettingValueBoolean(_settings.save_funct))
basic.append(rs)
rs = RadioSetting("fm", "FM Function",
RadioSettingValueBoolean(_settings.fm))
basic.append(rs)
rs = RadioSetting(
"beep_tone_disabled", "Beep Prompt",
RadioSettingValueBoolean(not _settings.beep_tone_disabled))
basic.append(rs)
rs = RadioSetting("voice_prompt", "Voice Prompt",
RadioSettingValueBoolean(_settings.voice_prompt))
basic.append(rs)
rs = RadioSetting("sidetone", "DTMF Side Tone",
RadioSettingValueBoolean(_settings.sidetone))
basic.append(rs)
rs = RadioSetting("ste_disabled", "Squelch Tail Eliminate",
RadioSettingValueBoolean(not _settings.ste_disabled))
basic.append(rs)
_limit = int(self._memobj.limits.lower_vhf) / 10
rs = RadioSetting("limits.lower_vhf", "VHF Lower Limit (MHz)",
RadioSettingValueInteger(128, 270, _limit))
def apply_limit(setting, obj):
value = int(setting.value) * 10
obj.lower_vhf = value
rs.set_apply_callback(apply_limit, self._memobj.limits)
basic.append(rs)
_limit = int(self._memobj.limits.upper_vhf) / 10
rs = RadioSetting("limits.upper_vhf", "VHF Upper Limit (MHz)",
RadioSettingValueInteger(128, 270, _limit))
def apply_limit(setting, obj):
value = int(setting.value) * 10
obj.upper_vhf = value
rs.set_apply_callback(apply_limit, self._memobj.limits)
basic.append(rs)
_limit = int(self._memobj.limits.lower_uhf) / 10
rs = RadioSetting("limits.lower_uhf", "UHF Lower Limit (MHz)",
RadioSettingValueInteger(400, 520, _limit))
def apply_limit(setting, obj):
value = int(setting.value) * 10
obj.lower_uhf = value
rs.set_apply_callback(apply_limit, self._memobj.limits)
basic.append(rs)
_limit = int(self._memobj.limits.upper_uhf) / 10
rs = RadioSetting("limits.upper_uhf", "UHF Upper Limit (MHz)",
RadioSettingValueInteger(400, 520, _limit))
def apply_limit(setting, obj):
value = int(setting.value) * 10
obj.upper_uhf = value
rs.set_apply_callback(apply_limit, self._memobj.limits)
basic.append(rs)
fm_preset = RadioSettingGroup("fm_preset", "FM Radio Presets")
group.append(fm_preset)
for i in range(0, 16):
if self._memobj.fm_presets[i] < 0x01AF:
used = True
preset = self._memobj.fm_presets[i] / 10.0 + 65
else:
used = False
preset = 65
rs = RadioSetting("fm_presets_%1i" % i, "FM Preset %i" % (i + 1),
RadioSettingValueBoolean(used),
RadioSettingValueFloat(65, 108, preset, 0.1, 1))
fm_preset.append(rs)
testmode = RadioSettingGroup("testmode", "Test Mode Settings")
group.append(testmode)
vhfdata = [
"136-139", "140-144", "145-149", "150-154", "155-159", "160-164",
"165-169", "170-174"
]
uhfdata = [
"400-409", "410-419", "420-429", "430-439", "440-449", "450-459",
"460-469", "470-479"
]
powernamedata = ["Hi", "Lo"]
powerkeydata = ["hipwr", "lopwr"]
for power in range(0, 2):
for index in range(0, 8):
key = "test.vhf%s%i" % (powerkeydata[power], index)
name = "%s Mhz %s Power" % (vhfdata[index],
powernamedata[power])
rs = RadioSetting(
key, name,
RadioSettingValueInteger(
0, 255,
getattr(self._memobj.test,
"vhf%s%i" % (powerkeydata[power], index))))
testmode.append(rs)
for power in range(0, 2):
for index in range(0, 8):
key = "test.uhf%s%i" % (powerkeydata[power], index)
name = "%s Mhz %s Power" % (uhfdata[index],
powernamedata[power])
rs = RadioSetting(
key, name,
RadioSettingValueInteger(
0, 255,
getattr(self._memobj.test,
"uhf%s%i" % (powerkeydata[power], index))))
testmode.append(rs)
for band in ["vhf", "uhf"]:
for index in range(0, 10):
key = "test.%ssquelch%i" % (band, index)
name = "%s Squelch %i" % (band.upper(), index)
rs = RadioSetting(
key, name,
RadioSettingValueInteger(
0, 255,
getattr(self._memobj.test,
"%ssquelch%i" % (band, index))))
testmode.append(rs)
return group
def get_settings(self):
"""Translate the bit in the mem_struct into settings in the UI"""
_mem = self._memobj
basic = RadioSettingGroup("basic", "Basic Settings")
advanced = RadioSettingGroup("advanced", "Advanced Settings")
other = RadioSettingGroup("other", "Other Settings")
work = RadioSettingGroup("work", "Work Mode Settings")
fm_preset = RadioSettingGroup("fm_preset", "FM Preset")
dtmfe = RadioSettingGroup("dtmfe", "DTMF Encode Settings")
dtmfd = RadioSettingGroup("dtmfd", "DTMF Decode Settings")
service = RadioSettingGroup("service", "Service Settings")
top = RadioSettings(basic, advanced, other, work, fm_preset, dtmfe,
dtmfd, service)
# Basic settings
if _mem.settings.squelch > 0x09:
val = 0x00
else:
val = _mem.settings.squelch
rs = RadioSetting(
"settings.squelch", "Squelch",
RadioSettingValueList(LIST_OFF1TO9, LIST_OFF1TO9[val]))
basic.append(rs)
if _mem.settings.save > 0x04:
val = 0x00
else:
val = _mem.settings.save
rs = RadioSetting("settings.save", "Battery Saver",
RadioSettingValueList(LIST_SAVE, LIST_SAVE[val]))
basic.append(rs)
if _mem.settings.vox > 0x0A:
val = 0x00
else:
val = _mem.settings.vox
rs = RadioSetting(
"settings.vox", "Vox",
RadioSettingValueList(LIST_OFF1TO10, LIST_OFF1TO10[val]))
basic.append(rs)
if _mem.settings.abr > 0x0A:
val = 0x00
else:
val = _mem.settings.abr
rs = RadioSetting(
"settings.abr", "Backlight Timeout",
RadioSettingValueList(LIST_OFF1TO10, LIST_OFF1TO10[val]))
basic.append(rs)
rs = RadioSetting("settings.tdr", "Dual Watch",
RadioSettingValueBoolean(_mem.settings.tdr))
basic.append(rs)
rs = RadioSetting("settings.beep", "Beep",
RadioSettingValueBoolean(_mem.settings.beep))
basic.append(rs)
if _mem.settings.timeout > 0x27:
val = 0x03
else:
val = _mem.settings.timeout
rs = RadioSetting(
"settings.timeout", "Timeout Timer",
RadioSettingValueList(LIST_TIMEOUT, LIST_TIMEOUT[val]))
basic.append(rs)
if _mem.settings.voice > 0x02:
val = 0x01
else:
val = _mem.settings.voice
rs = RadioSetting("settings.voice", "Voice Prompt",
RadioSettingValueList(LIST_VOICE, LIST_VOICE[val]))
basic.append(rs)
rs = RadioSetting(
"settings.dtmfst", "DTMF Sidetone",
RadioSettingValueList(LIST_DTMFST,
LIST_DTMFST[_mem.settings.dtmfst]))
basic.append(rs)
if _mem.settings.screv > 0x02:
val = 0x01
else:
val = _mem.settings.screv
rs = RadioSetting("settings.screv", "Scan Resume",
RadioSettingValueList(LIST_RESUME, LIST_RESUME[val]))
basic.append(rs)
rs = RadioSetting(
"settings.pttid", "When to send PTT ID",
RadioSettingValueList(LIST_PTTID, LIST_PTTID[_mem.settings.pttid]))
basic.append(rs)
if _mem.settings.pttlt > 0x1E:
val = 0x05
else:
val = _mem.settings.pttlt
rs = RadioSetting("pttlt", "PTT ID Delay",
RadioSettingValueInteger(0, 50, val))
basic.append(rs)
rs = RadioSetting(
"settings.mdfa", "Display Mode (A)",
RadioSettingValueList(LIST_MODE, LIST_MODE[_mem.settings.mdfa]))
basic.append(rs)
rs = RadioSetting(
"settings.mdfb", "Display Mode (B)",
RadioSettingValueList(LIST_MODE, LIST_MODE[_mem.settings.mdfb]))
basic.append(rs)
rs = RadioSetting("settings.sync", "Sync A & B",
RadioSettingValueBoolean(_mem.settings.sync))
basic.append(rs)
rs = RadioSetting(
"settings.wtled", "Standby LED Color",
RadioSettingValueList(LIST_COLOR, LIST_COLOR[_mem.settings.wtled]))
basic.append(rs)
rs = RadioSetting(
"settings.rxled", "RX LED Color",
RadioSettingValueList(LIST_COLOR, LIST_COLOR[_mem.settings.rxled]))
basic.append(rs)
rs = RadioSetting(
"settings.txled", "TX LED Color",
RadioSettingValueList(LIST_COLOR, LIST_COLOR[_mem.settings.txled]))
basic.append(rs)
if _mem.settings.almod > 0x02:
val = 0x00
else:
val = _mem.settings.almod
rs = RadioSetting("settings.almod", "Alarm Mode",
RadioSettingValueList(LIST_ALMOD, LIST_ALMOD[val]))
basic.append(rs)
if _mem.settings.tdrab > 0x02:
val = 0x00
else:
val = _mem.settings.tdrab
rs = RadioSetting("settings.tdrab", "Dual Watch TX Priority",
RadioSettingValueList(LIST_OFFAB, LIST_OFFAB[val]))
basic.append(rs)
rs = RadioSetting("settings.ste", "Squelch Tail Eliminate (HT to HT)",
RadioSettingValueBoolean(_mem.settings.ste))
basic.append(rs)
if _mem.settings.rpste > 0x0A:
val = 0x00
else:
val = _mem.settings.rpste
rs = RadioSetting("settings.rpste",
"Squelch Tail Eliminate (repeater)",
RadioSettingValueList(LIST_RPSTE, LIST_RPSTE[val]))
basic.append(rs)
if _mem.settings.rptrl > 0x0A:
val = 0x00
else:
val = _mem.settings.rptrl
rs = RadioSetting(
"settings.rptrl", "STE Repeater Delay",
RadioSettingValueList(LIST_STEDELAY, LIST_STEDELAY[val]))
basic.append(rs)
rs = RadioSetting(
"settings.ponmsg", "Power-On Message",
RadioSettingValueList(LIST_PONMSG,
LIST_PONMSG[_mem.settings.ponmsg]))
basic.append(rs)
rs = RadioSetting("settings.roger", "Roger Beep",
RadioSettingValueBoolean(_mem.settings.roger))
basic.append(rs)
rs = RadioSetting("settings.dani", "Decode ANI",
RadioSettingValueBoolean(_mem.settings.dani))
basic.append(rs)
if _mem.settings.dtmfg > 0x3C:
val = 0x14
else:
val = _mem.settings.dtmfg
rs = RadioSetting("settings.dtmfg", "DTMF Gain",
RadioSettingValueInteger(0, 60, val))
basic.append(rs)
# Advanced settings
rs = RadioSetting("settings.reset", "RESET Menu",
RadioSettingValueBoolean(_mem.settings.reset))
advanced.append(rs)
rs = RadioSetting("settings.menu", "All Menus",
RadioSettingValueBoolean(_mem.settings.menu))
advanced.append(rs)
rs = RadioSetting("settings.fmradio", "Broadcast FM Radio",
RadioSettingValueBoolean(_mem.settings.fmradio))
advanced.append(rs)
rs = RadioSetting("settings.alarm", "Alarm Sound",
RadioSettingValueBoolean(_mem.settings.alarm))
advanced.append(rs)
# Other settings
def _filter(name):
filtered = ""
for char in str(name):
if char in chirp_common.CHARSET_ASCII:
filtered += char
else:
filtered += " "
return filtered
_msg = _mem.firmware_msg
val = RadioSettingValueString(0, 7, _filter(_msg.line1))
val.set_mutable(False)
rs = RadioSetting("firmware_msg.line1", "Firmware Message 1", val)
other.append(rs)
val = RadioSettingValueString(0, 7, _filter(_msg.line2))
val.set_mutable(False)
rs = RadioSetting("firmware_msg.line2", "Firmware Message 2", val)
other.append(rs)
_msg = _mem.sixpoweron_msg
val = RadioSettingValueString(0, 7, _filter(_msg.line1))
val.set_mutable(False)
rs = RadioSetting("sixpoweron_msg.line1", "6+Power-On Message 1", val)
other.append(rs)
val = RadioSettingValueString(0, 7, _filter(_msg.line2))
val.set_mutable(False)
rs = RadioSetting("sixpoweron_msg.line2", "6+Power-On Message 2", val)
other.append(rs)
_msg = _mem.poweron_msg
rs = RadioSetting("poweron_msg.line1", "Power-On Message 1",
RadioSettingValueString(0, 7, _filter(_msg.line1)))
other.append(rs)
rs = RadioSetting("poweron_msg.line2", "Power-On Message 2",
RadioSettingValueString(0, 7, _filter(_msg.line2)))
other.append(rs)
if str(_mem.firmware_msg.line1) == "UVVG302":
lower = 136
upper = 174
else:
lower = 130
upper = 179
rs = RadioSetting(
"limits.vhf.lower", "VHF Lower Limit (MHz)",
RadioSettingValueInteger(lower, upper, _mem.limits.vhf.lower))
other.append(rs)
rs = RadioSetting(
"limits.vhf.upper", "VHF Upper Limit (MHz)",
RadioSettingValueInteger(lower, upper, _mem.limits.vhf.upper))
other.append(rs)
if str(_mem.firmware_msg.line1) == "UVVG302":
lower = 200
upper = 230
else:
lower = 220
upper = 225
rs = RadioSetting(
"limits.vhf2.lower", "VHF2 Lower Limit (MHz)",
RadioSettingValueInteger(lower, upper, _mem.limits.vhf2.lower))
other.append(rs)
rs = RadioSetting(
"limits.vhf2.upper", "VHF2 Upper Limit (MHz)",
RadioSettingValueInteger(lower, upper, _mem.limits.vhf2.upper))
other.append(rs)
if str(_mem.firmware_msg.line1) == "UVVG302":
lower = 400
upper = 480
else:
lower = 400
upper = 520
rs = RadioSetting(
"limits.uhf.lower", "UHF Lower Limit (MHz)",
RadioSettingValueInteger(lower, upper, _mem.limits.uhf.lower))
other.append(rs)
rs = RadioSetting(
"limits.uhf.upper", "UHF Upper Limit (MHz)",
RadioSettingValueInteger(lower, upper, _mem.limits.uhf.upper))
other.append(rs)
# Work mode settings
rs = RadioSetting(
"settings.displayab", "Display",
RadioSettingValueList(LIST_AB, LIST_AB[_mem.settings.displayab]))
work.append(rs)
rs = RadioSetting(
"settings.workmode", "VFO/MR Mode",
RadioSettingValueList(LIST_WORKMODE,
LIST_WORKMODE[_mem.settings.workmode]))
work.append(rs)
rs = RadioSetting("settings.keylock", "Keypad Lock",
RadioSettingValueBoolean(_mem.settings.keylock))
work.append(rs)
rs = RadioSetting(
"wmchannel.mrcha", "MR A Channel",
RadioSettingValueInteger(0, 127, _mem.wmchannel.mrcha))
work.append(rs)
rs = RadioSetting(
"wmchannel.mrchb", "MR B Channel",
RadioSettingValueInteger(0, 127, _mem.wmchannel.mrchb))
work.append(rs)
def convert_bytes_to_freq(bytes):
real_freq = 0
for byte in bytes:
real_freq = (real_freq * 10) + byte
return chirp_common.format_freq(real_freq * 10)
def my_validate(value):
_vhf_lower = int(_mem.limits.vhf.lower)
_vhf_upper = int(_mem.limits.vhf.upper)
_vhf2_lower = int(_mem.limits.vhf2.lower)
_vhf2_upper = int(_mem.limits.vhf2.upper)
_uhf_lower = int(_mem.limits.uhf.lower)
_uhf_upper = int(_mem.limits.uhf.upper)
value = chirp_common.parse_freq(value)
msg = ("Can't be less than %i.0000")
if value > 99000000 and value < _vhf_lower * 1000000:
raise InvalidValueError(msg % (_vhf_lower))
msg = ("Can't be between %i.9975-%i.0000")
if (_vhf_upper + 1) * 1000000 <= value and \
value < _vhf2_lower * 1000000:
raise InvalidValueError(msg % (_vhf_upper, _vhf2_lower))
if (_vhf2_upper + 1) * 1000000 <= value and \
value < _uhf_lower * 1000000:
raise InvalidValueError(msg % (_vhf2_upper, _uhf_lower))
msg = ("Can't be greater than %i.9975")
if value > 99000000 and value >= (_uhf_upper + 1) * 1000000:
raise InvalidValueError(msg % (_uhf_upper))
return chirp_common.format_freq(value)
def apply_freq(setting, obj):
value = chirp_common.parse_freq(str(setting.value)) / 10
for i in range(7, -1, -1):
obj.freq[i] = value % 10
value /= 10
val1a = RadioSettingValueString(0, 10,
convert_bytes_to_freq(_mem.vfo.a.freq))
val1a.set_validate_callback(my_validate)
rs = RadioSetting("vfo.a.freq", "VFO A Frequency", val1a)
rs.set_apply_callback(apply_freq, _mem.vfo.a)
work.append(rs)
val1b = RadioSettingValueString(0, 10,
convert_bytes_to_freq(_mem.vfo.b.freq))
val1b.set_validate_callback(my_validate)
rs = RadioSetting("vfo.b.freq", "VFO B Frequency", val1b)
rs.set_apply_callback(apply_freq, _mem.vfo.b)
work.append(rs)
rs = RadioSetting(
"vfo.a.sftd", "VFO A Shift",
RadioSettingValueList(LIST_SHIFTD, LIST_SHIFTD[_mem.vfo.a.sftd]))
work.append(rs)
rs = RadioSetting(
"vfo.b.sftd", "VFO B Shift",
RadioSettingValueList(LIST_SHIFTD, LIST_SHIFTD[_mem.vfo.b.sftd]))
work.append(rs)
def convert_bytes_to_offset(bytes):
real_offset = 0
for byte in bytes:
real_offset = (real_offset * 10) + byte
return chirp_common.format_freq(real_offset * 1000)
def apply_offset(setting, obj):
value = chirp_common.parse_freq(str(setting.value)) / 1000
for i in range(5, -1, -1):
obj.offset[i] = value % 10
value /= 10
val1a = RadioSettingValueString(
0, 10, convert_bytes_to_offset(_mem.vfo.a.offset))
rs = RadioSetting("vfo.a.offset", "VFO A Offset", val1a)
rs.set_apply_callback(apply_offset, _mem.vfo.a)
work.append(rs)
val1b = RadioSettingValueString(
0, 10, convert_bytes_to_offset(_mem.vfo.b.offset))
rs = RadioSetting("vfo.b.offset", "VFO B Offset", val1b)
rs.set_apply_callback(apply_offset, _mem.vfo.b)
work.append(rs)
rs = RadioSetting(
"vfo.a.txpower", "VFO A Power",
RadioSettingValueList(LIST_TXPOWER,
LIST_TXPOWER[_mem.vfo.a.txpower]))
work.append(rs)
rs = RadioSetting(
"vfo.b.txpower", "VFO B Power",
RadioSettingValueList(LIST_TXPOWER,
LIST_TXPOWER[_mem.vfo.b.txpower]))
work.append(rs)
rs = RadioSetting(
"vfo.a.widenarr", "VFO A Bandwidth",
RadioSettingValueList(LIST_BANDWIDTH,
LIST_BANDWIDTH[_mem.vfo.a.widenarr]))
work.append(rs)
rs = RadioSetting(
"vfo.b.widenarr", "VFO B Bandwidth",
RadioSettingValueList(LIST_BANDWIDTH,
LIST_BANDWIDTH[_mem.vfo.b.widenarr]))
work.append(rs)
rs = RadioSetting(
"vfo.a.scode", "VFO A S-CODE",
RadioSettingValueList(LIST_SCODE, LIST_SCODE[_mem.vfo.a.scode]))
work.append(rs)
rs = RadioSetting(
"vfo.b.scode", "VFO B S-CODE",
RadioSettingValueList(LIST_SCODE, LIST_SCODE[_mem.vfo.b.scode]))
work.append(rs)
rs = RadioSetting(
"vfo.a.step", "VFO A Tuning Step",
RadioSettingValueList(LIST_STEP, LIST_STEP[_mem.vfo.a.step]))
work.append(rs)
rs = RadioSetting(
"vfo.b.step", "VFO B Tuning Step",
RadioSettingValueList(LIST_STEP, LIST_STEP[_mem.vfo.b.step]))
work.append(rs)
# broadcast FM settings
_fm_presets = self._memobj.fm_presets
if _fm_presets <= 108.0 * 10 - 650:
preset = _fm_presets / 10.0 + 65
elif _fm_presets >= 65.0 * 10 and _fm_presets <= 108.0 * 10:
preset = _fm_presets / 10.0
else:
preset = 76.0
rs = RadioSetting("fm_presets", "FM Preset(MHz)",
RadioSettingValueFloat(65, 108.0, preset, 0.1, 1))
fm_preset.append(rs)
# DTMF encode settings
for i in range(0, 15):
_codeobj = self._memobj.pttid[i].code
_code = "".join([DTMF_CHARS[x] for x in _codeobj if int(x) < 0x1F])
val = RadioSettingValueString(0, 16, _code, False)
val.set_charset(DTMF_CHARS)
rs = RadioSetting("pttid/%i.code" % i, "Signal Code %i" % (i + 1),
val)
def apply_code(setting, obj):
code = []
for j in range(0, 16):
try:
code.append(DTMF_CHARS.index(str(setting.value)[j]))
except IndexError:
code.append(0xFF)
obj.code = code
rs.set_apply_callback(apply_code, self._memobj.pttid[i])
dtmfe.append(rs)
if _mem.ani.dtmfon > 0xC3:
val = 0x03
else:
val = _mem.ani.dtmfon
rs = RadioSetting(
"ani.dtmfon", "DTMF Speed (on)",
RadioSettingValueList(LIST_DTMFSPEED, LIST_DTMFSPEED[val]))
dtmfe.append(rs)
if _mem.ani.dtmfoff > 0xC3:
val = 0x03
else:
val = _mem.ani.dtmfoff
rs = RadioSetting(
"ani.dtmfoff", "DTMF Speed (off)",
RadioSettingValueList(LIST_DTMFSPEED, LIST_DTMFSPEED[val]))
dtmfe.append(rs)
_codeobj = self._memobj.ani.code
_code = "".join([DTMF_CHARS[x] for x in _codeobj if int(x) < 0x1F])
val = RadioSettingValueString(0, 7, _code, False)
val.set_charset(DTMF_CHARS)
rs = RadioSetting("ani.code", "ANI Code", val)
def apply_code(setting, obj):
code = []
for j in range(0, 7):
try:
code.append(DTMF_CHARS.index(str(setting.value)[j]))
except IndexError:
code.append(0xFF)
obj.code = code
rs.set_apply_callback(apply_code, self._memobj.ani)
dtmfe.append(rs)
rs = RadioSetting(
"ani.aniid", "When to send ANI ID",
RadioSettingValueList(LIST_PTTID, LIST_PTTID[_mem.ani.aniid]))
dtmfe.append(rs)
# DTMF decode settings
rs = RadioSetting("ani.mastervice", "Master and Vice ID",
RadioSettingValueBoolean(_mem.ani.mastervice))
dtmfd.append(rs)
_codeobj = _mem.ani.masterid
_code = "".join([DTMF_CHARS[x] for x in _codeobj if int(x) < 0x1F])
val = RadioSettingValueString(0, 5, _code, False)
val.set_charset(DTMF_CHARS)
rs = RadioSetting("ani.masterid", "Master Control ID", val)
def apply_code(setting, obj):
code = []
for j in range(0, 5):
try:
code.append(DTMF_CHARS.index(str(setting.value)[j]))
except IndexError:
code.append(0xFF)
obj.masterid = code
rs.set_apply_callback(apply_code, self._memobj.ani)
dtmfd.append(rs)
rs = RadioSetting("ani.minspection", "Master Inspection",
RadioSettingValueBoolean(_mem.ani.minspection))
dtmfd.append(rs)
rs = RadioSetting("ani.mmonitor", "Master Monitor",
RadioSettingValueBoolean(_mem.ani.mmonitor))
dtmfd.append(rs)
rs = RadioSetting("ani.mstun", "Master Stun",
RadioSettingValueBoolean(_mem.ani.mstun))
dtmfd.append(rs)
rs = RadioSetting("ani.mkill", "Master Kill",
RadioSettingValueBoolean(_mem.ani.mkill))
dtmfd.append(rs)
rs = RadioSetting("ani.mrevive", "Master Revive",
RadioSettingValueBoolean(_mem.ani.mrevive))
dtmfd.append(rs)
_codeobj = _mem.ani.viceid
_code = "".join([DTMF_CHARS[x] for x in _codeobj if int(x) < 0x1F])
val = RadioSettingValueString(0, 5, _code, False)
val.set_charset(DTMF_CHARS)
rs = RadioSetting("ani.viceid", "Vice Control ID", val)
def apply_code(setting, obj):
code = []
for j in range(0, 5):
try:
code.append(DTMF_CHARS.index(str(setting.value)[j]))
except IndexError:
code.append(0xFF)
obj.viceid = code
rs.set_apply_callback(apply_code, self._memobj.ani)
dtmfd.append(rs)
rs = RadioSetting("ani.vinspection", "Vice Inspection",
RadioSettingValueBoolean(_mem.ani.vinspection))
dtmfd.append(rs)
rs = RadioSetting("ani.vmonitor", "Vice Monitor",
RadioSettingValueBoolean(_mem.ani.vmonitor))
dtmfd.append(rs)
rs = RadioSetting("ani.vstun", "Vice Stun",
RadioSettingValueBoolean(_mem.ani.vstun))
dtmfd.append(rs)
rs = RadioSetting("ani.vkill", "Vice Kill",
RadioSettingValueBoolean(_mem.ani.vkill))
dtmfd.append(rs)
rs = RadioSetting("ani.vrevive", "Vice Revive",
RadioSettingValueBoolean(_mem.ani.vrevive))
dtmfd.append(rs)
_codeobj = _mem.ani.inspection
_code = "".join([DTMF_CHARS[x] for x in _codeobj if int(x) < 0x1F])
val = RadioSettingValueString(0, 8, _code, False)
val.set_charset(DTMF_CHARS)
rs = RadioSetting("ani.inspection", "Inspection Code", val)
def apply_code(setting, obj):
code = []
for j in range(0, 8):
try:
code.append(DTMF_CHARS.index(str(setting.value)[j]))
except IndexError:
code.append(0xFF)
obj.inspection = code
rs.set_apply_callback(apply_code, self._memobj.ani)
dtmfd.append(rs)
_codeobj = _mem.ani.monitor
_code = "".join([DTMF_CHARS[x] for x in _codeobj if int(x) < 0x1F])
val = RadioSettingValueString(0, 8, _code, False)
val.set_charset(DTMF_CHARS)
rs = RadioSetting("ani.monitor", "Monitor Code", val)
def apply_code(setting, obj):
code = []
for j in range(0, 8):
try:
code.append(DTMF_CHARS.index(str(setting.value)[j]))
except IndexError:
code.append(0xFF)
obj.monitor = code
rs.set_apply_callback(apply_code, self._memobj.ani)
dtmfd.append(rs)
_codeobj = _mem.ani.alarmcode
_code = "".join([DTMF_CHARS[x] for x in _codeobj if int(x) < 0x1F])
val = RadioSettingValueString(0, 8, _code, False)
val.set_charset(DTMF_CHARS)
rs = RadioSetting("ani.alarm", "Alarm Code", val)
def apply_code(setting, obj):
code = []
for j in range(0, 8):
try:
code.append(DTMF_CHARS.index(str(setting.value)[j]))
except IndexError:
code.append(0xFF)
obj.alarmcode = code
rs.set_apply_callback(apply_code, self._memobj.ani)
dtmfd.append(rs)
_codeobj = _mem.ani.stun
_code = "".join([DTMF_CHARS[x] for x in _codeobj if int(x) < 0x1F])
val = RadioSettingValueString(0, 8, _code, False)
val.set_charset(DTMF_CHARS)
rs = RadioSetting("ani.stun", "Stun Code", val)
def apply_code(setting, obj):
code = []
for j in range(0, 8):
try:
code.append(DTMF_CHARS.index(str(setting.value)[j]))
except IndexError:
code.append(0xFF)
obj.stun = code
rs.set_apply_callback(apply_code, self._memobj.ani)
dtmfd.append(rs)
_codeobj = _mem.ani.kill
_code = "".join([DTMF_CHARS[x] for x in _codeobj if int(x) < 0x1F])
val = RadioSettingValueString(0, 8, _code, False)
val.set_charset(DTMF_CHARS)
rs = RadioSetting("ani.kill", "Kill Code", val)
def apply_code(setting, obj):
code = []
for j in range(0, 8):
try:
code.append(DTMF_CHARS.index(str(setting.value)[j]))
except IndexError:
code.append(0xFF)
obj.kill = code
rs.set_apply_callback(apply_code, self._memobj.ani)
dtmfd.append(rs)
_codeobj = _mem.ani.revive
_code = "".join([DTMF_CHARS[x] for x in _codeobj if int(x) < 0x1F])
val = RadioSettingValueString(0, 8, _code, False)
val.set_charset(DTMF_CHARS)
rs = RadioSetting("ani.revive", "Revive Code", val)
def apply_code(setting, obj):
code = []
for j in range(0, 8):
try:
code.append(DTMF_CHARS.index(str(setting.value)[j]))
except IndexError:
code.append(0xFF)
obj.revive = code
rs.set_apply_callback(apply_code, self._memobj.ani)
dtmfd.append(rs)
def apply_dmtf_listvalue(setting, obj):
LOG.debug("Setting value: " + str(setting.value) + " from list")
val = str(setting.value)
index = LIST_DTMF_SPECIAL_DIGITS.index(val)
val = LIST_DTMF_SPECIAL_VALUES[index]
obj.set_value(val)
if _mem.ani.groupcode in LIST_DTMF_SPECIAL_VALUES:
idx = LIST_DTMF_SPECIAL_VALUES.index(_mem.ani.groupcode)
else:
idx = LIST_DTMF_SPECIAL_VALUES.index(0x0B)
rs = RadioSetting(
"ani.groupcode", "Group Code",
RadioSettingValueList(LIST_DTMF_SPECIAL_DIGITS,
LIST_DTMF_SPECIAL_DIGITS[idx]))
rs.set_apply_callback(apply_dmtf_listvalue, _mem.ani.groupcode)
dtmfd.append(rs)
if _mem.ani.spacecode in LIST_DTMF_SPECIAL_VALUES:
idx = LIST_DTMF_SPECIAL_VALUES.index(_mem.ani.spacecode)
else:
idx = LIST_DTMF_SPECIAL_VALUES.index(0x0C)
rs = RadioSetting(
"ani.spacecode", "Space Code",
RadioSettingValueList(LIST_DTMF_SPECIAL_DIGITS,
LIST_DTMF_SPECIAL_DIGITS[idx]))
rs.set_apply_callback(apply_dmtf_listvalue, _mem.ani.spacecode)
dtmfd.append(rs)
if _mem.ani.resettime > 0x9F:
val = 0x4F
else:
val = _mem.ani.resettime
rs = RadioSetting(
"ani.resettime", "Reset Time",
RadioSettingValueList(LIST_RESETTIME, LIST_RESETTIME[val]))
dtmfd.append(rs)
if _mem.ani.delayproctime > 0x27:
val = 0x04
else:
val = _mem.ani.delayproctime
rs = RadioSetting(
"ani.delayproctime", "Delay Processing Time",
RadioSettingValueList(LIST_DELAYPROCTIME, LIST_DELAYPROCTIME[val]))
dtmfd.append(rs)
# Service settings
for band in ["vhf", "uhf"]:
for index in range(0, 10):
key = "squelch.%s.sql%i" % (band, index)
if band == "vhf":
_obj = self._memobj.squelch.vhf
elif band == "uhf":
_obj = self._memobj.squelch.uhf
val = RadioSettingValueInteger(
0, 123, getattr(_obj, "sql%i" % (index)))
if index == 0:
val.set_mutable(False)
name = "%s Squelch %i" % (band.upper(), index)
rs = RadioSetting(key, name, val)
service.append(rs)
return top
def get_settings(self):
"""Translate the bit in the mem_struct into settings in the UI"""
_mem = self._memobj
basic = RadioSettingGroup("basic", "Basic Settings")
other = RadioSettingGroup("other", "Other Settings")
work = RadioSettingGroup("work", "Work Mode Settings")
dtmf = RadioSettingGroup("dtmf", "DTMF Settings")
top = RadioSettings(basic, other, work, dtmf)
# Basic
# Audio: A01-A04
aftone = RadioSetting(
"settings.aftone", "AF tone control",
RadioSettingValueList(LIST_AFTONE,
LIST_AFTONE[_mem.settings.aftone]))
basic.append(aftone)
spkr = RadioSetting(
"settings.spkr", "Speaker",
RadioSettingValueList(LIST_SPKR, LIST_SPKR[_mem.settings.spkr]))
basic.append(spkr)
audio = RadioSetting(
"settings.audio", "Stereo/Mono",
RadioSettingValueList(LIST_AUDIO, LIST_AUDIO[_mem.settings.audio]))
basic.append(audio)
sbmute = RadioSetting(
"settings.sbmute", "Sub band mute",
RadioSettingValueList(LIST_SBMUTE,
LIST_SBMUTE[_mem.settings.sbmute]))
basic.append(sbmute)
# TX/RX: B01-B08
mgain = RadioSetting(
"settings.mgain", "Mic gain",
RadioSettingValueList(LIST_MLNHM, LIST_MLNHM[_mem.settings.mgain]))
basic.append(mgain)
ptt = RadioSetting(
"settings.ptt", "PTT mode",
RadioSettingValueList(LIST_PTT, LIST_PTT[_mem.settings.ptt]))
basic.append(ptt)
# B03 (per channel)
# B04 (per channel)
rxexp = RadioSetting(
"settings.rxexp", "RX expansion",
RadioSettingValueList(LIST_RXEXP, LIST_RXEXP[_mem.settings.rxexp]))
basic.append(rxexp)
vox = RadioSetting(
"settings.vox", "Vox",
RadioSettingValueList(LIST_VOX, LIST_VOX[_mem.settings.vox]))
basic.append(vox)
voxs = RadioSetting(
"settings.voxs", "Vox sensitivity",
RadioSettingValueList(LIST_MLNHM, LIST_MLNHM[_mem.settings.voxs]))
basic.append(voxs)
# B08 (per channel)
# Display: C01-C06
display = RadioSetting(
"settings.display", "Display select",
RadioSettingValueList(LIST_DISPLAY,
LIST_DISPLAY[_mem.settings.display]))
basic.append(display)
lcdb = RadioSetting(
"settings.lcdb", "LCD brightness",
RadioSettingValueList(LIST_MINMAX,
LIST_MINMAX[_mem.settings.lcdb]))
basic.append(lcdb)
color = RadioSetting(
"settings.color", "LCD color",
RadioSettingValueList(LIST_COLOR, LIST_COLOR[_mem.settings.color]))
basic.append(color)
lcdc = RadioSetting(
"settings.lcdc", "LCD contrast",
RadioSettingValueList(LIST_MINMAX,
LIST_MINMAX[_mem.settings.lcdc]))
basic.append(lcdc)
btime = RadioSetting(
"settings.btime", "LCD backlight time",
RadioSettingValueList(LIST_BTIME, LIST_BTIME[_mem.settings.btime]))
basic.append(btime)
keyb = RadioSetting(
"settings.keyb", "Key brightness",
RadioSettingValueList(LIST_MINMAX,
LIST_MINMAX[_mem.settings.keyb]))
basic.append(keyb)
# Memory: D01-D04
# D01 (per channel)
# D02 (per channel)
mrscan = RadioSetting(
"settings.mrscan", "Memory scan type",
RadioSettingValueList(LIST_MRSCAN,
LIST_MRSCAN[_mem.settings.mrscan]))
basic.append(mrscan)
# D04 (per channel)
# Scan: E01-E04
dwstop = RadioSetting(
"settings.dwstop", "Dual watch stop",
RadioSettingValueList(LIST_DWSTOP,
LIST_DWSTOP[_mem.settings.dwstop]))
basic.append(dwstop)
scand = RadioSetting(
"settings.scand", "Scan direction",
RadioSettingValueList(LIST_SCAND, LIST_SCAND[_mem.settings.scand]))
basic.append(scand)
scanr = RadioSetting(
"settings.scanr", "Scan resume",
RadioSettingValueList(LIST_SCANR, LIST_SCANR[_mem.settings.scanr]))
basic.append(scanr)
scansb = RadioSetting("settings.scansb", "Scan stop beep",
RadioSettingValueBoolean(_mem.settings.scansb))
basic.append(scansb)
# System: F01-F09
apo = RadioSetting(
"settings.apo", "Automatic power off [hours]",
RadioSettingValueList(LIST_APO, LIST_APO[_mem.settings.apo]))
basic.append(apo)
ars = RadioSetting("settings.ars", "Automatic repeater shift",
RadioSettingValueBoolean(_mem.settings.ars))
basic.append(ars)
beep = RadioSetting(
"settings.beep", "Beep volume",
RadioSettingValueList(LIST_BEEP, LIST_BEEP[_mem.settings.beep]))
basic.append(beep)
fkey = RadioSetting(
"settings.fkey", "F key",
RadioSettingValueList(LIST_FKEY, LIST_FKEY[_mem.settings.fkey]))
basic.append(fkey)
pfkey1 = RadioSetting(
"settings.pfkey1", "Mic P1 key",
RadioSettingValueList(LIST_PFKEY,
LIST_PFKEY[_mem.settings.pfkey1]))
basic.append(pfkey1)
pfkey2 = RadioSetting(
"settings.pfkey2", "Mic P2 key",
RadioSettingValueList(LIST_PFKEY,
LIST_PFKEY[_mem.settings.pfkey2]))
basic.append(pfkey2)
pfkey3 = RadioSetting(
"settings.pfkey3", "Mic P3 key",
RadioSettingValueList(LIST_PFKEY,
LIST_PFKEY[_mem.settings.pfkey3]))
basic.append(pfkey3)
pfkey4 = RadioSetting(
"settings.pfkey4", "Mic P4 key",
RadioSettingValueList(LIST_PFKEY,
LIST_PFKEY[_mem.settings.pfkey4]))
basic.append(pfkey4)
omode = RadioSetting(
"settings.omode", "Operation mode",
RadioSettingValueList(LIST_AB, LIST_AB[_mem.settings.omode]))
basic.append(omode)
rxcoverm = RadioSetting(
"settings.rxcoverm", "RX coverage - memory",
RadioSettingValueList(LIST_COVERAGE,
LIST_COVERAGE[_mem.settings.rxcoverm]))
basic.append(rxcoverm)
rxcoverv = RadioSetting(
"settings.rxcoverv", "RX coverage - VFO",
RadioSettingValueList(LIST_COVERAGE,
LIST_COVERAGE[_mem.settings.rxcoverv]))
basic.append(rxcoverv)
tot = RadioSetting(
"settings.tot", "Time out timer [min]",
RadioSettingValueList(LIST_TOT, LIST_TOT[_mem.settings.tot]))
basic.append(tot)
# Timer/Clock: G01-G04
# G01
datefmt = RadioSetting(
"settings.datefmt", "Date format",
RadioSettingValueList(LIST_DATEFMT,
LIST_DATEFMT[_mem.settings.datefmt]))
basic.append(datefmt)
timefmt = RadioSetting(
"settings.timefmt", "Time format",
RadioSettingValueList(LIST_TIMEFMT,
LIST_TIMEFMT[_mem.settings.timefmt]))
basic.append(timefmt)
timesig = RadioSetting("settings.timesig", "Time signal",
RadioSettingValueBoolean(_mem.settings.timesig))
basic.append(timesig)
tz = RadioSetting(
"settings.tz", "Time zone",
RadioSettingValueList(LIST_TZ, LIST_TZ[_mem.settings.tz]))
basic.append(tz)
# Signaling: H01-H06
bell = RadioSetting(
"settings.bell", "Bell ringer",
RadioSettingValueList(LIST_BELL, LIST_BELL[_mem.settings.bell]))
basic.append(bell)
# H02 (per channel)
dtmfmodenc = RadioSetting(
"settings.dtmfmodenc", "DTMF mode encode",
RadioSettingValueBoolean(_mem.settings.dtmfmodenc))
basic.append(dtmfmodenc)
dtmfmoddec = RadioSetting(
"settings.dtmfmoddec", "DTMF mode decode",
RadioSettingValueBoolean(_mem.settings.dtmfmoddec))
basic.append(dtmfmoddec)
# H04 (per channel)
decbandsel = RadioSetting(
"settings.decbandsel", "DTMF band select",
RadioSettingValueList(LIST_AB, LIST_AB[_mem.settings.decbandsel]))
basic.append(decbandsel)
sqlexp = RadioSetting("settings.sqlexp", "SQL expansion",
RadioSettingValueBoolean(_mem.settings.sqlexp))
basic.append(sqlexp)
# Pkt: I01-I03
databnd = RadioSetting(
"settings.databnd", "Packet data band",
RadioSettingValueList(LIST_DATABND,
LIST_DATABND[_mem.settings.databnd]))
basic.append(databnd)
dataspd = RadioSetting(
"settings.dataspd", "Packet data speed",
RadioSettingValueList(LIST_DATASPD,
LIST_DATASPD[_mem.settings.dataspd]))
basic.append(dataspd)
datasql = RadioSetting(
"settings.datasql", "Packet data squelch",
RadioSettingValueList(LIST_DATASQL,
LIST_DATASQL[_mem.settings.datasql]))
basic.append(datasql)
# Other
dw = RadioSetting("settings.dw", "Dual watch",
RadioSettingValueBoolean(_mem.settings.dw))
other.append(dw)
cpuclk = RadioSetting(
"settings.cpuclk", "CPU clock frequency",
RadioSettingValueList(LIST_CPUCLK,
LIST_CPUCLK[_mem.settings.cpuclk]))
other.append(cpuclk)
def _filter(name):
filtered = ""
for char in str(name):
if char in VALID_CHARS:
filtered += char
else:
filtered += " "
return filtered
line16 = RadioSetting(
"poweron_msg.line16", "Power-on message",
RadioSettingValueString(0, 16, _filter(_mem.poweron_msg.line16)))
other.append(line16)
line32 = RadioSetting(
"embedded_msg.line32", "Embedded message",
RadioSettingValueString(0, 32, _filter(_mem.embedded_msg.line32)))
other.append(line32)
# Work
workmoda = RadioSetting(
"settings.workmoda", "Work mode A",
RadioSettingValueList(LIST_WORK,
LIST_WORK[_mem.settings.workmoda]))
work.append(workmoda)
workmodb = RadioSetting(
"settings.workmodb", "Work mode B",
RadioSettingValueList(LIST_WORK,
LIST_WORK[_mem.settings.workmodb]))
work.append(workmodb)
wbanda = RadioSetting(
"settings.wbanda", "Work band A",
RadioSettingValueList(LIST_WBANDA,
LIST_WBANDA[(_mem.settings.wbanda) - 1]))
work.append(wbanda)
wbandb = RadioSetting(
"settings.wbandb", "Work band B",
RadioSettingValueList(LIST_WBANDB,
LIST_WBANDB[(_mem.settings.wbandb) - 4]))
work.append(wbandb)
sqla = RadioSetting(
"settings.sqla", "Squelch A",
RadioSettingValueList(LIST_SQL, LIST_SQL[_mem.settings.sqla]))
work.append(sqla)
sqlb = RadioSetting(
"settings.sqlb", "Squelch B",
RadioSettingValueList(LIST_SQL, LIST_SQL[_mem.settings.sqlb]))
work.append(sqlb)
stepa = RadioSetting(
"settings.stepa", "Auto step A",
RadioSettingValueList(LIST_STEP, LIST_STEP[_mem.settings.stepa]))
work.append(stepa)
stepb = RadioSetting(
"settings.stepb", "Auto step B",
RadioSettingValueList(LIST_STEP, LIST_STEP[_mem.settings.stepb]))
work.append(stepb)
mrcha = RadioSetting(
"settings.mrcha", "Current channel A",
RadioSettingValueInteger(0, 499, _mem.settings.mrcha))
work.append(mrcha)
mrchb = RadioSetting(
"settings.mrchb", "Current channel B",
RadioSettingValueInteger(0, 499, _mem.settings.mrchb))
work.append(mrchb)
val = _mem.settings.offseta / 100.00
offseta = RadioSetting("settings.offseta", "Offset A (0-37.95)",
RadioSettingValueFloat(0, 38.00, val, 0.05, 2))
work.append(offseta)
val = _mem.settings.offsetb / 100.00
offsetb = RadioSetting("settings.offsetb", "Offset B (0-79.95)",
RadioSettingValueFloat(0, 80.00, val, 0.05, 2))
work.append(offsetb)
wpricha = RadioSetting(
"settings.wpricha", "Priority channel A",
RadioSettingValueInteger(0, 499, _mem.settings.wpricha))
work.append(wpricha)
wprichb = RadioSetting(
"settings.wprichb", "Priority channel B",
RadioSettingValueInteger(0, 499, _mem.settings.wprichb))
work.append(wprichb)
smode = RadioSetting(
"settings.smode", "Smart function mode",
RadioSettingValueList(LIST_SMODE, LIST_SMODE[_mem.settings.smode]))
work.append(smode)
# dtmf
ttdkey = RadioSetting(
"dtmf.ttdkey", "D key function",
RadioSettingValueList(LIST_TTDKEY, LIST_TTDKEY[_mem.dtmf.ttdkey]))
dtmf.append(ttdkey)
ttdgt = RadioSetting(
"dtmf.ttdgt", "Digit time",
RadioSettingValueList(LIST_TT200,
LIST_TT200[(_mem.dtmf.ttdgt) - 5]))
dtmf.append(ttdgt)
ttint = RadioSetting(
"dtmf.ttint", "Interval time",
RadioSettingValueList(LIST_TT200,
LIST_TT200[(_mem.dtmf.ttint) - 5]))
dtmf.append(ttint)
tt1stdgt = RadioSetting(
"dtmf.tt1stdgt", "1st digit time",
RadioSettingValueList(LIST_TT200,
LIST_TT200[(_mem.dtmf.tt1stdgt) - 5]))
dtmf.append(tt1stdgt)
tt1stdly = RadioSetting(
"dtmf.tt1stdly", "1st digit delay time",
RadioSettingValueList(LIST_TT1000,
LIST_TT1000[(_mem.dtmf.tt1stdly) - 2]))
dtmf.append(tt1stdly)
ttdlyqt = RadioSetting(
"dtmf.ttdlyqt", "Digit delay when use qt",
RadioSettingValueList(LIST_TT1000,
LIST_TT1000[(_mem.dtmf.ttdlyqt) - 2]))
dtmf.append(ttdlyqt)
ttsig = RadioSetting(
"dtmf2.ttsig", "Signal",
RadioSettingValueList(LIST_TTSIG, LIST_TTSIG[_mem.dtmf2.ttsig]))
dtmf.append(ttsig)
ttautorst = RadioSetting(
"dtmf2.ttautorst", "Auto reset time",
RadioSettingValueList(LIST_TTAUTORST,
LIST_TTAUTORST[_mem.dtmf2.ttautorst]))
dtmf.append(ttautorst)
if _mem.dtmf2.ttgrpcode > 0x06:
val = 0x00
else:
val = _mem.dtmf2.ttgrpcode
ttgrpcode = RadioSetting(
"dtmf2.ttgrpcode", "Group code",
RadioSettingValueList(LIST_TTGRPCODE, LIST_TTGRPCODE[val]))
dtmf.append(ttgrpcode)
ttintcode = RadioSetting(
"dtmf2.ttintcode", "Interval code",
RadioSettingValueList(LIST_TTINTCODE,
LIST_TTINTCODE[_mem.dtmf2.ttintcode]))
dtmf.append(ttintcode)
if _mem.dtmf2.ttalert > 0x04:
val = 0x00
else:
val = _mem.dtmf2.ttalert
ttalert = RadioSetting(
"dtmf2.ttalert", "Alert tone/transpond",
RadioSettingValueList(LIST_TTALERT, LIST_TTALERT[val]))
dtmf.append(ttalert)
ttautod = RadioSetting(
"dtmf.ttautod", "Auto dial group",
RadioSettingValueList(LIST_TTAUTOD,
LIST_TTAUTOD[_mem.dtmf.ttautod]))
dtmf.append(ttautod)
# setup 9 dtmf autodial entries
for i in map(str, range(1, 10)):
objname = "code" + i
strname = "Code " + str(i)
dtmfsetting = getattr(_mem.dtmfcode, objname)
dtmflen = getattr(_mem.dtmfcode, objname + "_len")
dtmfstr = self._bbcd2dtmf(dtmfsetting, dtmflen)
code = RadioSettingValueString(0, 16, dtmfstr)
code.set_charset(DTMF_CHARS + list(" "))
rs = RadioSetting("dtmfcode." + objname, strname, code)
dtmf.append(rs)
return top
def get_settings(self):
_settings = self._memobj.settings
basic = RadioSettingGroup("basic", "Basic")
sound = RadioSettingGroup("sound", "Sound")
dtmf = RadioSettingGroup("dtmf", "DTMF")
arts = RadioSettingGroup("arts", "ARTS")
eai = RadioSettingGroup("eai", "Emergency")
msg = RadioSettingGroup("msg", "Messages")
top = RadioSettings(basic, sound, arts, dtmf, eai, msg)
basic.append(RadioSetting(
"att_wx", "Attenuation WX",
RadioSettingValueBoolean(_settings.att_wx)))
basic.append(RadioSetting(
"att_marine", "Attenuation Marine",
RadioSettingValueBoolean(_settings.att_marine)))
basic.append(RadioSetting(
"att_broadcast", "Attenuation Broadcast",
RadioSettingValueBoolean(_settings.att_broadcast)))
basic.append(RadioSetting(
"ars", "Auto Repeater Shift",
RadioSettingValueBoolean(_settings.ars)))
basic.append(RadioSetting(
"home_vfo", "Home->VFO",
RadioSettingValueBoolean(_settings.home_vfo)))
basic.append(RadioSetting(
"bclo", "Busy Channel Lockout",
RadioSettingValueBoolean(_settings.bclo)))
basic.append(RadioSetting(
"busyled", "Busy LED",
RadioSettingValueBoolean(_settings.busy_led)))
basic.append(RadioSetting(
"fast_tone_search", "Fast Tone search",
RadioSettingValueBoolean(_settings.fast_tone_search)))
basic.append(RadioSetting(
"priority_revert", "Priority Revert",
RadioSettingValueBoolean(_settings.priority_revert)))
basic.append(RadioSetting(
"protect_memory", "Protect memory",
RadioSettingValueBoolean(_settings.protect_memory)))
basic.append(RadioSetting(
"scan_lamp", "Scan Lamp",
RadioSettingValueBoolean(_settings.scan_lamp)))
basic.append(RadioSetting(
"split_tone", "Split tone",
RadioSettingValueBoolean(_settings.split_tone)))
basic.append(RadioSetting(
"tone_search_mute", "Tone search mute",
RadioSettingValueBoolean(_settings.tone_search_mute)))
basic.append(RadioSetting(
"txsave", "TX save",
RadioSettingValueBoolean(_settings.txsave)))
basic.append(RadioSetting(
"wx_alert", "WX Alert",
RadioSettingValueBoolean(_settings.wx_alert)))
opts = ["Bar Int", "Bar Ext"]
basic.append(RadioSetting(
"am_antenna", "AM antenna",
RadioSettingValueList(opts, opts[_settings.am_antenna])))
opts = ["Ext Ant", "Earphone"]
basic.append(RadioSetting(
"fm_antenna", "FM antenna",
RadioSettingValueList(opts, opts[_settings.fm_antenna])))
opts = ["off"] + ["%0.1f" % (t / 60.0) for t in range(30, 750, 30)]
basic.append(RadioSetting(
"apo", "APO time (hrs)",
RadioSettingValueList(opts, opts[_settings.apo])))
opts = ["+/- 5 MHZ", "+/- 10 MHZ", "+/- 50 MHZ", "+/- 100 MHZ"]
basic.append(RadioSetting(
"channel_counter", "Channel counter",
RadioSettingValueList(opts, opts[_settings.channel_counter])))
opts = ["0.3", "0.5", "0.7", "1.0", "1.5"]
basic.append(RadioSetting(
"fw_key_timer", "FW key timer (s)",
RadioSettingValueList(opts, opts[_settings.fw_key_timer])))
opts = ["Home", "Reverse"]
basic.append(RadioSetting(
"hm_rv", "HM/RV key",
RadioSettingValueList(opts, opts[_settings.hm_rv])))
opts = ["%d" % t for t in range(2, 11)] + ["continuous", "off"]
basic.append(RadioSetting(
"lamp", "Lamp Timer (s)",
RadioSettingValueList(opts, opts[_settings.lamp])))
basic.append(RadioSetting(
"lock", "Lock",
RadioSettingValueBoolean(_settings.lock)))
opts = ["key", "ptt", "key+ptt"]
basic.append(RadioSetting(
"lock_mode", "Lock mode",
RadioSettingValueList(opts, opts[_settings.lock_mode])))
opts = ["10", "20", "50", "100"]
basic.append(RadioSetting(
"mem_ch_step", "Memory Chan step",
RadioSettingValueList(opts, opts[_settings.mem_ch_step])))
opts = ["lower", "next"]
basic.append(RadioSetting(
"mem_storage", "Memory storage mode",
RadioSettingValueList(opts, opts[_settings.mem_storage])))
opts = ["%d" % t for t in range(1, 10)]
basic.append(RadioSetting(
"mic_gain", "Mic gain",
RadioSettingValueList(opts, opts[_settings.mic_gain])))
opts = ["monitor", "tone call"]
basic.append(RadioSetting(
"moni_tcall", "Moni/TCall button",
RadioSettingValueList(opts, opts[_settings.moni_tcall])))
opts = ["off"] + \
["%02d:%02d" % (t / 60, t % 60) for t in range(10, 1450, 10)]
basic.append(RadioSetting(
"on_timer", "On Timer (hrs)",
RadioSettingValueList(opts, opts[_settings.on_timer])))
opts2 = ["off"] + \
["0.%d" % t for t in range(1, 10)] + \
["%1.1f" % (t / 10.0) for t in range(10, 105, 5)]
basic.append(RadioSetting(
"priority_time", "Priority time",
RadioSettingValueList(opts2, opts2[_settings.priority_time])))
opts = ["off", "20", "50", "100", "200"]
basic.append(RadioSetting(
"ptt_delay", "PTT delay (ms)",
RadioSettingValueList(opts, opts[_settings.ptt_delay])))
basic.append(RadioSetting(
"rx_save", "RX save (s)",
RadioSettingValueList(opts2, opts2[_settings.rx_save])))
basic.append(RadioSetting(
"scan_restart", "Scan restart (s)",
RadioSettingValueList(opts2, opts2[_settings.scan_restart])))
opts = ["%1.1f" % (t / 10.0) for t in range(20, 105, 5)] + \
["busy", "hold"]
basic.append(RadioSetting(
"scan_resume", "Scan resume (s)",
RadioSettingValueList(opts, opts[_settings.scan_resume])))
opts = ["single", "continuous"]
basic.append(RadioSetting(
"smart_search", "Smart search",
RadioSettingValueList(opts, opts[_settings.smart_search])))
opts = ["off"] + ["TRX %d" % t for t in range(1, 11)] + ["hold"] + \
["TX %d" % t for t in range(1, 11)]
basic.append(RadioSetting(
"sub_rx_timer", "Sub RX timer",
RadioSettingValueList(opts, opts[_settings.sub_rx_timer])))
opts = ["C", "F"]
basic.append(RadioSetting(
"temp_unit", "Temperature unit",
RadioSettingValueList(opts, opts[_settings.temp_unit])))
opts = ["off"] + ["%1.1f" % (t / 10.0) for t in range(5, 105, 5)]
basic.append(RadioSetting(
"tot", "Time-out timer (mins)",
RadioSettingValueList(opts, opts[_settings.tot])))
opts = ["all", "band"]
basic.append(RadioSetting(
"vfo_mode", "VFO mode",
RadioSettingValueList(opts, opts[_settings.vfo_mode])))
opts = ["off"] + ["%d" % t for t in range(5, 65, 5)] + ["EAI"]
basic.append(RadioSetting(
"wake_up", "Wake up (s)",
RadioSettingValueList(opts, opts[_settings.wake_up])))
opts = ["hold", "3 secs"]
basic.append(RadioSetting(
"vol_key_mode", "Volume key mode",
RadioSettingValueList(opts, opts[_settings.vol_key_mode])))
# subgroup programmable keys
opts = ["INTNET", "INT MR", "Set Mode (my key)"]
basic.append(RadioSetting(
"internet_key", "Internet key",
RadioSettingValueList(opts, opts[_settings.internet_key])))
keys = ["Antenna AM", "Antenna FM", "Antenna Attenuator",
"Auto Power Off", "Auto Repeater Shift", "ARTS Beep",
"ARTS Interval", "Busy Channel Lockout", "Bell Ringer",
"Bell Select", "Bank Name", "Band Edge Beep", "Beep Level",
"Beep Select", "Beep User", "Busy LED", "Channel Counter",
"Clock Shift", "CW ID", "CW Learning", "CW Pitch",
"CW Training", "DC Voltage", "DCS Code", "DCS Reverse",
"DTMF A/M", "DTMF Delay", "DTMF Set", "DTMF Speed",
"EAI Timer", "Emergency Alarm", "Ext Menu", "FW Key",
"Half Deviation", "Home/Reverse", "Home > VFO", "INT Code",
"INT Conn Mode", "INT A/M", "INT Set", "INT Key", "INTNET",
"Lamp", "LED Light", "Lock", "Moni/T-Call", "Mic Gain",
"Memory Display", "Memory Write Mode", "Memory Channel Step",
"Memory Name Write", "Memory Protect", "Memory Skip",
"Message List", "Message Reg", "Message Set", "On Timer",
"Open Message", "Pager Answer Back", "Pager Receive Code",
"Pager Transmit Code", "Pager Frequency", "Priority Revert",
"Priority Timer", "Password", "PTT Delay",
"Repeater Shift Direction", "Repeater Shift", "Receive Mode",
"Smart Search", "Save Rx", "Save Tx", "Scan Lamp",
"Scan Resume", "Scan Restart", "Speaker Out",
"Squelch Level", "Squelch Type", "Squelch S Meter",
"Squelch Split Tone", "Step", "Stereo", "Sub Rx", "Temp",
"Tone Frequency", "Time Out Timer", "Tone Search Mute",
"Tone Search Speed", "VFO Band", "VFO Skip", "Volume Mode",
"Wake Up", "Weather Alert"]
rs = RadioSetting(
"my_key", "My key",
RadioSettingValueList(keys, keys[_settings.my_key - 16]))
# TODO: fix keys list isnt exactly right order
# leave disabled in settings for now
# basic.append(rs)
# sound tab
sound.append(RadioSetting(
"band_edge_beep", "Band edge beep",
RadioSettingValueBoolean(_settings.band_edge_beep)))
opts = ["off", "key+scan", "key"]
sound.append(RadioSetting(
"beep_mode", "Beep mode",
RadioSettingValueList(opts, opts[_settings.beep_mode])))
_volumes = self._memobj.volumes
opts = map(str, range(0, 33))
sound.append(RadioSetting(
"speaker_vol", "Speaker volume",
RadioSettingValueList(opts, opts[_volumes.speaker])))
sound.append(RadioSetting(
"earphone_vol", "Earphone volume",
RadioSettingValueList(opts, opts[_volumes.earphone])))
opts = ["auto", "speaker"]
sound.append(RadioSetting(
"fm_speaker_out", "FM Speaker out",
RadioSettingValueList(opts, opts[_settings.fm_speaker_out])))
opts = ["mono", "stereo"]
sound.append(RadioSetting(
"fm_broadcast_mode", "FM broadcast mode",
RadioSettingValueList(
opts, opts[_settings.fm_broadcast_mode])))
opts = map(str, range(16))
sound.append(RadioSetting(
"sql_fm", "Squelch level (FM)",
RadioSettingValueList(opts, opts[_settings.sql_fm])))
opts = map(str, range(9))
sound.append(RadioSetting(
"sql_wfm", "Squelch level (WFM)",
RadioSettingValueList(opts, opts[_settings.sql_wfm])))
opts = map(str, range(16))
sound.append(RadioSetting(
"radio_am_sql", "Squelch level (Broadcast Radio AM)",
RadioSettingValueList(opts, opts[_settings.radio_am_sql])))
opts = map(str, range(9))
sound.append(RadioSetting(
"radio_fm_sql", "Squelch level (Broadcast Radio FM)",
RadioSettingValueList(opts, opts[_settings.radio_fm_sql])))
# dtmf tab
opts = ["manual", "auto"]
dtmf.append(RadioSetting(
"dtmf_autodialer", "DTMF autodialer mode",
RadioSettingValueList(opts, opts[_settings.dtmf_autodialer])))
opts = ["50", "250", "450", "750", "1000"]
dtmf.append(RadioSetting(
"dtmf_delay", "DTMF delay (ms)",
RadioSettingValueList(opts, opts[_settings.dtmf_delay])))
opts = ["50", "100"]
dtmf.append(RadioSetting(
"dtmf_speed", "DTMF speed (ms)",
RadioSettingValueList(opts, opts[_settings.dtmf_speed])))
opts = map(str, range(10))
dtmf.append(RadioSetting(
"dtmf_chan_active", "DTMF active",
RadioSettingValueList(
opts, opts[_settings.dtmf_chan_active])))
for i in range(10):
name = "dtmf" + str(i)
dtmfsetting = self._memobj.dtmf[i]
dtmfstr = ""
for c in dtmfsetting.memory:
if c < len(DTMFCHARSET):
dtmfstr += DTMFCHARSET[c]
LOG.debug(dtmfstr)
dtmfentry = RadioSettingValueString(0, 16, dtmfstr)
dtmfentry.set_charset(DTMFCHARSET + list(" "))
rs = RadioSetting(name, name.upper(), dtmfentry)
dtmf.append(rs)
# arts tab
arts.append(RadioSetting(
"arts", "ARTS",
RadioSettingValueBoolean(_settings.arts)))
opts = ["off", "in range", "always"]
arts.append(RadioSetting(
"arts_beep", "ARTS beep",
RadioSettingValueList(opts, opts[_settings.arts_beep])))
opts = ["15", "25"]
arts.append(RadioSetting(
"arts_interval", "ARTS interval",
RadioSettingValueList(opts, opts[_settings.arts_interval])))
arts.append(RadioSetting(
"arts_cwid_enable", "CW ID",
RadioSettingValueBoolean(_settings.arts_cwid_enable)))
cwid = RadioSettingValueString(
0, 16, self._decode_chars(_settings.arts_cwid.get_value()))
cwid.set_charset(CHARSET)
arts.append(RadioSetting("arts_cwid", "CW ID", cwid))
# EAI tab
eai.append(RadioSetting(
"emergency_eai", "EAI",
RadioSettingValueBoolean(_settings.emergency_eai)))
opts = ["interval %dm" % t for t in range(1, 10)] + \
["interval %dm" % t for t in range(10, 55, 5)] + \
["continuous %dm" % t for t in range(1, 10)] + \
["continuous %dm" % t for t in range(10, 55, 5)]
eai.append(RadioSetting(
"emergency_eai_time", "EAI time",
RadioSettingValueList(
opts, opts[_settings.emergency_eai_time])))
opts = ["beep", "strobe", "beep+strobe", "beam",
"beep+beam", "cw", "beep+cw", "cwt"]
eai.append(RadioSetting(
"emergency_signal", "emergency signal",
RadioSettingValueList(
opts, opts[_settings.emergency_signal])))
# msg tab
opts = ["off", "dc voltage", "message"]
msg.append(RadioSetting(
"openmsg_mode", "Opening message mode",
RadioSettingValueList(opts, opts[_settings.openmsg_mode])))
openmsg = RadioSettingValueString(
0, 6, self._decode_chars(_settings.openmsg.get_value()))
openmsg.set_charset(CHARSET)
msg.append(RadioSetting("openmsg", "Opening Message", openmsg))
return top
def get_settings(self):
common = RadioSettingGroup("common", "Common Settings")
band = RadioSettingGroup("band", "Band dependent Settings")
arts = RadioSettingGroup("arts",
"Auto Range Transponder System (ARTS)")
dtmf = RadioSettingGroup("dtmf", "DTMF Settings")
mic_button = RadioSettingGroup("mic_button", "Microphone Buttons")
setmode = RadioSettings(common, band, arts, dtmf, mic_button)
_overlay = self._memobj.overlay
# numbers and names of settings refer to the way they're
# presented in the set menu, as well as the list starting on
# page 49 of the manual
# 1 Automatic Power Off
opts = [
"Off",
"30 Min",
"1 Hour",
"1.5 Hours",
"2 Hours",
"2.5 Hours",
"3 Hours",
"3.5 Hours",
"4 Hours",
"4.5 Hours",
"5 Hours",
"5.5 Hours",
"6 Hours",
"6.5 Hours",
"7 Hours",
"7.5 Hours",
"8 Hours",
"8.5 Hours",
"9 Hours",
"9.5 Hours",
"10 Hours",
"10.5 Hours",
"11 Hours",
"11.5 Hours",
"12 Hours",
]
common.append(
RadioSetting("apo", "Automatic Power Off",
RadioSettingValueList(opts, opts[_overlay.apo])))
# 2 Automatic Repeater Shift function
opts = ["Off", "On"]
band.append(
RadioSetting("ars_vhf", "Automatic Repeater Shift VHF",
RadioSettingValueList(opts, opts[_overlay.ars_vhf])))
band.append(
RadioSetting("ars_uhf", "Automatic Repeater Shift UHF",
RadioSettingValueList(opts, opts[_overlay.ars_uhf])))
# 3 Selects the ARTS mode.
# -> Only useful to set it on the radio directly
# 4 Enables/disables the key/button beeper.
opts = ["Off", "On"]
common.append(
RadioSetting("beep", "Key/Button Beep",
RadioSettingValueList(opts, opts[_overlay.beep])))
# 5 Enables/disables the CW IDer during ARTS operation.
opts = ["Off", "On"]
arts.append(
RadioSetting("cwid", "Enables/Disables the CW ID",
RadioSettingValueList(opts, opts[_overlay.cwid])))
# 6 Callsign during ARTS operation.
cwidw = _overlay.cwidw.get_raw()
cwidw = cwidw.rstrip('\x00')
val = RadioSettingValueString(0, 6, cwidw)
val.set_charset(CHARSET)
rs = RadioSetting("cwidw", "CW Identifier Callsign", val)
def apply_cwid(setting):
value_string = setting.value.get_value()
_overlay.cwidw.set_value(value_string)
rs.set_apply_callback(apply_cwid)
arts.append(rs)
# 7 Front panel display's illumination level.
opts = ["0: Off", "1: Max", "2", "3", "4", "5", "6", "7: Min"]
common.append(
RadioSetting("dim", "Display Illumination",
RadioSettingValueList(opts, opts[_overlay.dim])))
# 8 Setting the DCS code number.
# Note: This Menu item can be set independently for each band,
# and independently in each memory.
# 9 Activates the DCS Code Search
# -> Only useful if set on radio itself
# 10 Selects 'Normal' or 'Inverted' DCS coding.
opts = ["TRX Normal", "RX Reversed", "TX Reversed", "TRX Reversed"]
band.append(
RadioSetting("dcsnr_vhf", "DCS coding VHF",
RadioSettingValueList(opts,
opts[_overlay.dcsnr_vhf])))
band.append(
RadioSetting("dcsnr_uhf", "DCS coding UHF",
RadioSettingValueList(opts,
opts[_overlay.dcsnr_uhf])))
# 11 Selects the 'sub' band display format
opts = [
"Frequency", "Off / Sub Band disabled", "DC Input Voltage", "CW ID"
]
common.append(
RadioSetting("disp", "Sub Band Display Format",
RadioSettingValueList(opts, opts[_overlay.disp])))
# 12 Setting the DTMF Autodialer delay time
opts = ["50 ms", "250 ms", "450 ms", "750 ms", "1 s"]
dtmf.append(
RadioSetting("dtmfd", "Autodialer delay time",
RadioSettingValueList(opts, opts[_overlay.dtmfd])))
# 13 Setting the DTMF Autodialer sending speed
opts = ["50 ms", "75 ms", "100 ms"]
dtmf.append(
RadioSetting("dtmfs", "Autodialer sending speed",
RadioSettingValueList(opts, opts[_overlay.dtmfs])))
# 14 Current DTMF Autodialer memory
rs = RadioSetting("dtmfw", "Current Autodialer memory",
RadioSettingValueInteger(1, 16, _overlay.dtmfw + 1))
def apply_dtmfw(setting):
_overlay.dtmfw = setting.value.get_value() - 1
rs.set_apply_callback(apply_dtmfw)
dtmf.append(rs)
# DTMF Memory
for i in range(16):
dtmf_string = ""
for j in range(16):
dtmf_char = ''
dtmf_int = int(self._memobj.dtmf_mem[i].dtmf[j])
if dtmf_int < 10:
dtmf_char = str(dtmf_int)
elif dtmf_int == 14:
dtmf_char = '*'
elif dtmf_int == 15:
dtmf_char = '#'
elif dtmf_int == 255:
break
dtmf_string += dtmf_char
radio_setting_value_string = RadioSettingValueString(
0, 16, dtmf_string)
radio_setting_value_string.set_charset(DTMF_CHARSET)
rs = RadioSetting("dtmf_{0:02d}".format(i),
"DTMF Mem " + str(i + 1),
radio_setting_value_string)
def apply_dtmf(setting, index):
radio_setting_value_string = setting.value.get_value().rstrip()
j = 0
for dtmf_char in radio_setting_value_string:
dtmf_int = 255
if dtmf_char in "0123456789":
dtmf_int = int(dtmf_char)
elif dtmf_char == '*':
dtmf_int = 14
elif dtmf_char == '#':
dtmf_int = 15
if dtmf_int < 255:
self._memobj.dtmf_mem[index].dtmf[j] = dtmf_int
j += 1
if j < 16:
self._memobj.dtmf_mem[index].dtmf[j] = 255
rs.set_apply_callback(apply_dtmf, i)
dtmf.append(rs)
# 16 Enables/disables the PTT switch lock
opts = ["Off", "Band A", "Band B", "Both"]
common.append(
RadioSetting("lockt", "PTT switch lock",
RadioSettingValueList(opts, opts[_overlay.lockt])))
# 17 Selects the Microphone type to be used
opts = ["MH-42", "MH-48"]
common.append(
RadioSetting("mic", "Microphone type",
RadioSettingValueList(opts, opts[_overlay.mic])))
# 18 Reduces the audio level on the sub receiver when the
# main receiver is active
opts = ["Off", "On"]
common.append(
RadioSetting("mute", "Mute Sub Receiver",
RadioSettingValueList(opts, opts[_overlay.mute])))
# 20 - 23 Programming the microphones button assignment
buttons = [
"ACC / P1",
"P / P2",
"P1 / P3",
"P2 / P4",
]
opts_button = [
"Low", "Tone", "MHz", "Rev", "Home", "Band", "VFO / Memory",
"Sql Off", "1750 Hz Tone Call", "Repeater", "Priority"
]
for i, button in enumerate(buttons):
rs = RadioSetting(
"button" + str(i), button,
RadioSettingValueList(opts_button,
opts_button[_overlay.button[i]]))
def apply_button(setting, index):
value_string = setting.value.get_value()
value_int = opts_button.index(value_string)
_overlay.button[index] = value_int
rs.set_apply_callback(apply_button, i)
mic_button.append(rs)
# 24 Adjusts the RF SQL threshold level
opts = ["Off", "S-1", "S-5", "S-9", "S-FULL"]
band.append(
RadioSetting(
"rf_sql_vhf", "RF Sql VHF",
RadioSettingValueList(opts, opts[_overlay.rf_sql_vhf])))
band.append(
RadioSetting(
"rf_sql_uhf", "RF Sql UHF",
RadioSettingValueList(opts, opts[_overlay.rf_sql_uhf])))
# 25 Selects the Scan-Resume mode
opts = ["Busy", "Time"]
band.append(
RadioSetting("scan_vhf", "Scan-Resume VHF",
RadioSettingValueList(opts, opts[_overlay.scan_vhf])))
band.append(
RadioSetting("scan_uhf", "Scan-Resume UHF",
RadioSettingValueList(opts, opts[_overlay.scan_uhf])))
# 28 Defining the audio path to the external speaker
opts = ["Off", "Band A", "Band B", "Both"]
common.append(
RadioSetting(
"speaker_cnt", "External Speaker",
RadioSettingValueList(opts, opts[_overlay.speaker_cnt])))
# 31 Sets the Time-Out Timer
opts = ["Off", "Band A", "Band B", "Both"]
common.append(
RadioSetting("tot", "TX Time-Out [Min.] (0 = Off)",
RadioSettingValueInteger(0, 30, _overlay.tot)))
# 32 Reducing the MIC Gain (and Deviation)
opts = ["Off", "On"]
band.append(
RadioSetting("txnar_vhf", "TX Narrowband VHF",
RadioSettingValueList(opts,
opts[_overlay.txnar_vhf])))
band.append(
RadioSetting("txnar_uhf", "TX Narrowband UHF",
RadioSettingValueList(opts,
opts[_overlay.txnar_uhf])))
# 33 Enables/disables the VFO Tracking feature
opts = ["Off", "On"]
common.append(
RadioSetting("vfotr", "VFO Tracking",
RadioSettingValueList(opts, opts[_overlay.vfotr])))
# 34 Selects the receiving mode on the VHF band
opts = ["Inhibit (only FM)", "AM", "Auto"]
common.append(
RadioSetting("am", "AM Mode",
RadioSettingValueList(opts, opts[_overlay.am])))
# Current Band
opts = ["VHF", "UHF"]
common.append(
RadioSetting(
"current_band", "Current Band",
RadioSettingValueList(opts, opts[_overlay.current_band])))
# Show number of VHF and UHF channels
val = RadioSettingValueString(0, 7,
str(int(self._memobj.nb_mem_used_vhf)))
val.set_mutable(False)
rs = RadioSetting("num_chan_vhf", "Number of VHF channels", val)
common.append(rs)
val = RadioSettingValueString(0, 7,
str(int(self._memobj.nb_mem_used_uhf)))
val.set_mutable(False)
rs = RadioSetting("num_chan_uhf", "Number of UHF channels", val)
common.append(rs)
return setmode
def get_settings(self):
_settings = self._memobj.settings
basic = RadioSettingGroup("basic", "Basic")
dtmf = RadioSettingGroup("dtmf", "DTMF Code & Paging")
arts = RadioSettingGroup("arts", "ARTS")
autodial = RadioSettingGroup("autodial", "AutoDial")
top = RadioSettings(basic, autodial, arts, dtmf)
rs = RadioSetting("squelch", "Squelch",
RadioSettingValueInteger(0, 15, _settings.squelch))
basic.append(rs)
rs = RadioSetting("keybeep", "Keypad Beep",
RadioSettingValueBoolean(_settings.keybeep))
basic.append(rs)
rs = RadioSetting("scnl", "Scan Lamp",
RadioSettingValueBoolean(_settings.scnl))
basic.append(rs)
options = ["off", "30m", "1h", "3h", "5h", "8h"]
rs = RadioSetting(
"apo", "APO time (hrs)",
RadioSettingValueList(options, options[_settings.apo]))
basic.append(rs)
options = ["off", "1m", "2.5m", "5m", "10m"]
rs = RadioSetting(
"timeout", "Time Out Timer",
RadioSettingValueList(options, options[_settings.timeout]))
basic.append(rs)
options = [
"key", "dial", "key+dial", "ptt", "key+ptt", "dial+ptt", "all"
]
rs = RadioSetting(
"lock", "Lock mode",
RadioSettingValueList(options, options[_settings.lock]))
basic.append(rs)
options = ["off", "0.2", "0.3", "0.5", "1.0", "2.0"]
rs = RadioSetting(
"rxsave", "RX Save (sec)",
RadioSettingValueList(options, options[_settings.rxsave]))
basic.append(rs)
options = ["5sec", "key", "tgl"]
rs = RadioSetting(
"lamp", "Lamp mode",
RadioSettingValueList(options, options[_settings.lamp]))
basic.append(rs)
options = ["off", "1", "3", "5", "8", "rpt"]
rs = RadioSetting(
"bell", "Bell Repetitions",
RadioSettingValueList(options, options[_settings.bell]))
basic.append(rs)
rs = RadioSetting("cwid_en", "CWID Enable",
RadioSettingValueBoolean(_settings.cwid_en))
arts.append(rs)
cwid = RadioSettingValueString(
0, 16, self._decode_cwid(_settings.cwid.get_value()))
cwid.set_charset(CHARSET)
rs = RadioSetting("cwid", "CWID", cwid)
arts.append(rs)
options = ["off", "rx", "tx", "trx"]
rs = RadioSetting(
"artsmode", "ARTS Mode",
RadioSettingValueList(options, options[_settings.artsmode]))
arts.append(rs)
options = ["off", "in range", "always"]
rs = RadioSetting(
"artsbeep", "ARTS Beep",
RadioSettingValueList(options, options[_settings.artsbeep]))
arts.append(rs)
for i in range(0, 8):
dialsettings = _settings.autodial[i]
dialstr = ""
for c in dialsettings.digits:
if c < len(DTMFCHARSET):
dialstr += DTMFCHARSET[c]
dialentry = RadioSettingValueString(0, 16, dialstr)
dialentry.set_charset(DTMFCHARSET + list(" "))
rs = RadioSetting("autodial" + str(i + 1),
"AutoDial " + str(i + 1), dialentry)
autodial.append(rs)
dialstr = ""
for c in _settings.autodial9_ro.digits:
if c < len(DTMFCHARSET):
dialstr += DTMFCHARSET[c]
dialentry = RadioSettingValueString(0, 32, dialstr)
dialentry.set_mutable(False)
rs = RadioSetting("autodial9_ro", "AutoDial 9 (read only)", dialentry)
autodial.append(rs)
options = ["50ms", "100ms"]
rs = RadioSetting(
"pagingspeed", "Paging Speed",
RadioSettingValueList(options, options[_settings.pagingspeed]))
dtmf.append(rs)
options = ["250ms", "450ms", "750ms", "1000ms"]
rs = RadioSetting(
"pagingdelay", "Paging Delay",
RadioSettingValueList(options, options[_settings.pagingdelay]))
dtmf.append(rs)
options = ["off", "1", "3", "5", "8", "rpt"]
rs = RadioSetting(
"pagingbell", "Paging Bell Repetitions",
RadioSettingValueList(options, options[_settings.pagingbell]))
dtmf.append(rs)
options = ["off", "ans", "for"]
rs = RadioSetting(
"paginganswer", "Paging Answerback",
RadioSettingValueList(options, options[_settings.paginganswer]))
dtmf.append(rs)
rs = RadioSetting("code_dec_c_en", "Paging Code C Decode Enable",
RadioSettingValueBoolean(_settings.code_dec_c_en))
dtmf.append(rs)
_str = str(bitwise.bcd_to_int(_settings.pagingcodec_ro))
code = RadioSettingValueString(0, 3, _str)
code.set_charset(NUMERIC_CHARSET + list(" "))
code.set_mutable(False)
rs = RadioSetting("pagingcodec_ro", "Paging Code C (read only)", code)
dtmf.append(rs)
rs = RadioSetting("code_dec_p_en", "Paging Code P Decode Enable",
RadioSettingValueBoolean(_settings.code_dec_p_en))
dtmf.append(rs)
_str = str(bitwise.bcd_to_int(_settings.pagingcodep))
code = RadioSettingValueString(0, 3, _str)
code.set_charset(NUMERIC_CHARSET + list(" "))
rs = RadioSetting("pagingcodep", "Paging Code P", code)
dtmf.append(rs)
for i in range(0, 6):
num = str(i + 1)
name = "code_dec_" + num + "_en"
rs = RadioSetting(
name, "Paging Code " + num + " Decode Enable",
RadioSettingValueBoolean(getattr(_settings, name)))
dtmf.append(rs)
_str = str(bitwise.bcd_to_int(_settings.pagingcode[i].digits))
code = RadioSettingValueString(0, 3, _str)
code.set_charset(NUMERIC_CHARSET + list(" "))
rs = RadioSetting("pagingcode" + num, "Paging Code " + num, code)
dtmf.append(rs)
return top
