def __init__(self,
device_uri,
printer_name,
args,
parent=None,
name=None,
modal=0,
fl=0):
QMainWindow.__init__(self, parent, name, fl)
self.setIcon(load_pixmap('hp_logo', '128x128'))
self.init_failed = False
self.device_uri = device_uri
self.dev = None
self.printer_name = printer_name
bus = ['cups']
self.filename = ''
self.username = prop.username
self.args = args
self.setCentralWidget(QWidget(self, "qt_central_widget"))
self.FormLayout = QGridLayout(self.centralWidget(), 1, 1, 11, 6,
"FormLayout")
self.resize(QSize(600, 480).expandedTo(self.minimumSizeHint()))
self.clearWState(Qt.WState_Polished)
self.languageChange()
# if self.device_uri and self.printer_name:
# log.error("You may not specify both a printer (-p) and a device (-d).")
# self.FailureUI(self.__tr("<p><b>You may not specify both a printer (-p) and a device (-d)."))
# self.device_uri, self.printer_name = None, None
# self.init_failed = True
self.cups_printers = cups.getPrinters()
log.debug(self.cups_printers)
if self.printer_name:
found = False
for p in self.cups_printers:
if p.name == printer_name:
self.device_uri = p.device_uri
found = True
break
if not found:
self.FailureUI(
self.__tr(
"<b>Unknown printer name: %1</b><p>Please check the printer name and try again."
).arg(self.printer_name))
if found and not p.device_uri.startswith('hpfax:/'):
self.FailureUI(
self.__tr(
"You must specify a printer that has a device URI in the form 'hpfax:/...'"
))
self.init_failed = True
if not self.device_uri and not self.printer_name:
t = device.probeDevices(
bus=bus, filter={'fax-type': (operator.gt, FAX_TYPE_NONE)})
#print t
probed_devices = []
for d in t:
probed_devices.append(d.replace('hp:/', 'hpfax:/'))
#print probed_devices
probed_devices = utils.uniqueList(probed_devices)
log.debug(probed_devices)
max_deviceid_size, x, devices = 0, 0, {}
for d in probed_devices:
printers = []
for p in self.cups_printers:
#print p.device_uri, d
if p.device_uri == d:
#print "OK"
printers.append(p.name)
devices[x] = (d, printers)
x += 1
max_deviceid_size = max(len(d), max_deviceid_size)
x = len(devices)
#print devices
if x == 0:
from nodevicesform import NoDevicesForm
self.FailureUI(
self.__tr(
"<p><b>No devices found.</b><p>Please make sure your device is properly installed and try again."
))
self.init_failed = True
elif x == 1:
log.info(log.bold("Using device: %s" % devices[0][0]))
self.device_uri = devices[0][0]
else:
from chooseprinterdlg import ChoosePrinterDlg
dlg = ChoosePrinterDlg(self.cups_printers, ['hpfax'])
if dlg.exec_loop() == QDialog.Accepted:
self.device_uri = dlg.device_uri
else:
self.init_failed = True
self.dbus_avail, self.service, session_bus = device.init_dbus()
self.FaxView = ScrollFaxView(self.service, self.centralWidget(), self)
self.FormLayout.addWidget(self.FaxView, 0, 0)
if not self.init_failed:
if not self.device_uri or not self.device_uri.startswith("hpfax:"):
log.error("Invalid device URI: %s" % repr(device_uri))
self.FailureUI(
self.__tr(
"<b>Invalid device URI %1.</b><p>Please check the parameters to hp-print and try again."
).arg(repr(device_uri)))
self.init_failed = True
else:
try:
self.cur_device = device.Device(
device_uri=self.device_uri,
printer_name=self.printer_name)
except Error, e:
log.error("Invalid device URI or printer name.")
self.FailureUI(
"<b>Invalid device URI or printer name.</b><p>Please check the parameters to hp-print and try again."
)
self.init_failed = True
else:
self.device_uri = self.cur_device.device_uri
user_conf.set('last_used', 'device_uri', self.device_uri)
log.debug(self.device_uri)
self.statusBar().message(self.device_uri)
def __init__(self, printer_name=None, args=None,
parent=None,name=None,modal=0,fl=0):
QMainWindow.__init__(self,parent,name,fl)
self.printer_name = printer_name
self.file_list = []
self.args = args
self.init_failed = False
self.statusBar()
self.setIcon(load_pixmap('hp_logo', '128x128'))
signal.signal(signal.SIGINT, signal.SIG_DFL)
if not name:
self.setName("PrinterForm")
self.setCentralWidget(QWidget(self,"qt_central_widget"))
self.FormLayout = QGridLayout(self.centralWidget(),1,1,11,6,"FormLayout")
self.resize(QSize(600,480).expandedTo(self.minimumSizeHint()))
self.clearWState(Qt.WState_Polished)
self.languageChange()
self.cups_printers = device.getSupportedCUPSPrinters()
log.debug(self.cups_printers)
if not self.printer_name: # no -p provided
t = device.probeDevices(['cups'])
probed_devices = []
for d in t:
if d.startswith('hp:'):
probed_devices.append(d)
log.debug(probed_devices)
max_deviceid_size, x, devices = 0, 0, {}
for d in probed_devices:
printers = []
for p in self.cups_printers:
if p.device_uri == d:
printers.append(p.name)
devices[x] = (d, printers)
x += 1
max_deviceid_size = max(len(d), max_deviceid_size)
if x == 0:
from nodevicesform import NoDevicesForm
self.FailureUI(self.__tr("<p><b>No devices found.</b><p>Please make sure your device is properly installed and try again."))
self.init_failed = True
elif x == 1:
log.info(log.bold("Using device: %s" % devices[0][0]))
self.device_uri = devices[0][0]
else:
from chooseprinterdlg import ChoosePrinterDlg
dlg = ChoosePrinterDlg(self.cups_printers)
if dlg.exec_loop() == QDialog.Accepted:
self.printer_name = dlg.printer_name
self.device_uri = dlg.device_uri
else:
self.init_failed = True
else: # -p provided
for p in self.cups_printers:
if p.name == self.printer_name:
self.device_uri = p.device_uri
break
else:
self.FailureUI("<b>Invalid printer name.</b><p>Please check the parameters to hp-print and try again.")
self.init_failed = True
if not self.init_failed:
self.PrintView = ScrollPrintView(None, self.centralWidget(), self, "PrintView")
self.FormLayout.addWidget(self.PrintView,0,0)
try:
self.cur_device = device.Device(device_uri=self.device_uri,
printer_name=self.printer_name)
except Error, e:
log.error("Invalid device URI or printer name.")
self.FailureUI("<b>Invalid device URI or printer name.</b><p>Please check the parameters to hp-print and try again.")
self.init_failed = True
else:
self.device_uri = self.cur_device.device_uri
user_conf.set('last_used', 'device_uri', self.device_uri)
log.debug(self.device_uri)
self.statusBar().message(self.device_uri)
def __init__(self, device_uri, printer_name, args,
parent=None, name=None,
modal=0, fl=0):
QMainWindow.__init__(self,parent,name,fl)
self.setIcon(load_pixmap('hp_logo', '128x128'))
self.init_failed = False
self.device_uri = device_uri
self.dev = None
self.printer_name = printer_name
bus = ['cups']
self.filename = ''
self.username = prop.username
self.args = args
self.setCentralWidget(QWidget(self,"qt_central_widget"))
self.FormLayout = QGridLayout(self.centralWidget(),1,1,11,6,"FormLayout")
self.resize(QSize(600,480).expandedTo(self.minimumSizeHint()))
self.clearWState(Qt.WState_Polished)
self.languageChange()
# if self.device_uri and self.printer_name:
# log.error("You may not specify both a printer (-p) and a device (-d).")
# self.FailureUI(self.__tr("<p><b>You may not specify both a printer (-p) and a device (-d)."))
# self.device_uri, self.printer_name = None, None
# self.init_failed = True
self.cups_printers = cups.getPrinters()
log.debug(self.cups_printers)
if self.printer_name:
found = False
for p in self.cups_printers:
if p.name == printer_name:
self.device_uri = p.device_uri
found = True
break
if not found:
self.FailureUI(self.__tr("<b>Unknown printer name: %1</b><p>Please check the printer name and try again.").arg(self.printer_name))
if found and not p.device_uri.startswith('hpfax:/'):
self.FailureUI(self.__tr("You must specify a printer that has a device URI in the form 'hpfax:/...'"))
self.init_failed = True
if not self.device_uri and not self.printer_name:
t = device.probeDevices(bus=bus, filter={'fax-type':(operator.gt, FAX_TYPE_NONE)})
#print t
probed_devices = []
for d in t:
probed_devices.append(d.replace('hp:/', 'hpfax:/'))
#print probed_devices
probed_devices = utils.uniqueList(probed_devices)
log.debug(probed_devices)
max_deviceid_size, x, devices = 0, 0, {}
for d in probed_devices:
printers = []
for p in self.cups_printers:
#print p.device_uri, d
if p.device_uri == d:
#print "OK"
printers.append(p.name)
devices[x] = (d, printers)
x += 1
max_deviceid_size = max(len(d), max_deviceid_size)
x = len(devices)
#print devices
if x == 0:
from nodevicesform import NoDevicesForm
self.FailureUI(self.__tr("<p><b>No devices found.</b><p>Please make sure your device is properly installed and try again."))
self.init_failed = True
elif x == 1:
log.info(log.bold("Using device: %s" % devices[0][0]))
self.device_uri = devices[0][0]
else:
from chooseprinterdlg import ChoosePrinterDlg
dlg = ChoosePrinterDlg(self.cups_printers, ['hpfax'])
if dlg.exec_loop() == QDialog.Accepted:
self.device_uri = dlg.device_uri
else:
self.init_failed = True
self.dbus_avail, self.service, session_bus = device.init_dbus()
self.FaxView = ScrollFaxView(self.service, self.centralWidget(), self)
self.FormLayout.addWidget(self.FaxView,0,0)
if not self.init_failed:
if not self.device_uri or not self.device_uri.startswith("hpfax:"):
log.error("Invalid device URI: %s" % repr(device_uri))
self.FailureUI(self.__tr("<b>Invalid device URI %1.</b><p>Please check the parameters to hp-print and try again.").arg(repr(device_uri)));
self.init_failed = True
else:
try:
self.cur_device = device.Device(device_uri=self.device_uri,
printer_name=self.printer_name)
except Error, e:
log.error("Invalid device URI or printer name.")
self.FailureUI("<b>Invalid device URI or printer name.</b><p>Please check the parameters to hp-print and try again.")
self.init_failed = True
else:
self.device_uri = self.cur_device.device_uri
user_conf.set('last_used', 'device_uri', self.device_uri)
log.debug(self.device_uri)
self.statusBar().message(self.device_uri)
