def start():
# Create socket function that some versoin of python does not implement
_fixWinsock()
# Bind signal to default so that we can use Ctrl+C to stop it
signal.signal(signal.SIGINT, signal.SIG_DFL)
# Load known nodes
helper_bootstrap.knownNodes()
# Load config
helper_startup.loadConfig()
helper_startup.loadPubkeys()
# Start the thread that ... I don't know.
singleWorkerThread = singleWorker()
singleWorkerThread.daemon = True # close the main program even if there are threads left
singleWorkerThread.start()
# Start the SQL thread
sqlLookup = sqlThread()
sqlLookup.daemon = False # DON'T close the main program even if there are threads left. The closeEvent should command this thread to exit gracefully.
sqlLookup.start()
# Start the thread that process object
objectProcessorThread = objectProcessor()
objectProcessorThread.daemon = False # DON'T close the main program even the thread remains. This thread checks the shutdown variable after processing each object.
objectProcessorThread.start()
# Start the cleanerThread
singleCleanerThread = singleCleaner()
singleCleanerThread.daemon = True # close the main program even if there are threads left
singleCleanerThread.start()
# Load my address
shared.reloadMyAddressHashes()
# Connect to the root stream
streamNumber = 1
shared.streamsInWhichIAmParticipating[streamNumber] = 'no data'
selfInitiatedConnections[streamNumber] = {}
shared.inventorySets[streamNumber] = set(
) #We may write some codes below to initialise the set.
if isOurOperatingSystemLimitedToHavingVeryFewHalfOpenConnections():
maximumNumberOfHalfOpenConnections = 9
else:
maximumNumberOfHalfOpenConnections = 64
for i in xrange(maximumNumberOfHalfOpenConnections):
a = outgoingSynSender()
a.setup(streamNumber, selfInitiatedConnections)
a.start()
# Start the singleListenerThread
singleListenerThread = singleListener()
singleListenerThread.setup(selfInitiatedConnections)
singleListenerThread.daemon = True # close the main program even if there are threads left
singleListenerThread.start()
def start():
# Create socket function that some versoin of python does not implement
_fixWinsock()
# Bind signal to default so that we can use Ctrl+C to stop it
signal.signal(signal.SIGINT, signal.SIG_DFL)
# Load known nodes
helper_bootstrap.knownNodes()
# Load config
helper_startup.loadConfig()
helper_startup.loadPubkeys()
# Start the thread that ... I don't know.
singleWorkerThread = singleWorker()
singleWorkerThread.daemon = True # close the main program even if there are threads left
singleWorkerThread.start()
# Start the SQL thread
sqlLookup = sqlThread()
sqlLookup.daemon = False # DON'T close the main program even if there are threads left. The closeEvent should command this thread to exit gracefully.
sqlLookup.start()
# Start the thread that process object
objectProcessorThread = objectProcessor()
objectProcessorThread.daemon = False # DON'T close the main program even the thread remains. This thread checks the shutdown variable after processing each object.
objectProcessorThread.start()
# Start the cleanerThread
singleCleanerThread = singleCleaner()
singleCleanerThread.daemon = True # close the main program even if there are threads left
singleCleanerThread.start()
# Load my address
shared.reloadMyAddressHashes()
# Connect to the root stream
streamNumber = 1
shared.streamsInWhichIAmParticipating[streamNumber] = 'no data'
selfInitiatedConnections[streamNumber] = {}
shared.inventorySets[streamNumber] = set() #We may write some codes below to initialise the set.
if isOurOperatingSystemLimitedToHavingVeryFewHalfOpenConnections():
maximumNumberOfHalfOpenConnections = 9
else:
maximumNumberOfHalfOpenConnections = 64
for i in xrange(maximumNumberOfHalfOpenConnections):
a = outgoingSynSender()
a.setup(streamNumber, selfInitiatedConnections)
a.start()
# Start the singleListenerThread
singleListenerThread = singleListener()
singleListenerThread.setup(selfInitiatedConnections)
singleListenerThread.daemon = True # close the main program even if there are threads left
singleListenerThread.start()
def start(self, daemon=False):
_fixWinsock()
shared.daemon = daemon
# is the application already running? If yes then exit.
thisapp = singleton.singleinstance()
# get curses flag
curses = False
if '-c' in sys.argv:
curses = True
signal.signal(signal.SIGINT, helper_generic.signal_handler)
# signal.signal(signal.SIGINT, signal.SIG_DFL)
helper_bootstrap.knownNodes()
# Start the address generation thread
addressGeneratorThread = addressGenerator()
addressGeneratorThread.daemon = True # close the main program even if there are threads left
addressGeneratorThread.start()
# Start the thread that calculates POWs
singleWorkerThread = singleWorker()
singleWorkerThread.daemon = True # close the main program even if there are threads left
singleWorkerThread.start()
# Start the SQL thread
sqlLookup = sqlThread()
sqlLookup.daemon = False # DON'T close the main program even if there are threads left. The closeEvent should command this thread to exit gracefully.
sqlLookup.start()
# Start the thread that calculates POWs
objectProcessorThread = objectProcessor()
objectProcessorThread.daemon = False # DON'T close the main program even the thread remains. This thread checks the shutdown variable after processing each object.
objectProcessorThread.start()
# Start the cleanerThread
singleCleanerThread = singleCleaner()
singleCleanerThread.daemon = True # close the main program even if there are threads left
singleCleanerThread.start()
shared.reloadMyAddressHashes()
shared.reloadBroadcastSendersForWhichImWatching()
if shared.safeConfigGetBoolean('bitmessagesettings', 'apienabled'):
try:
apiNotifyPath = shared.config.get(
'bitmessagesettings', 'apinotifypath')
except:
apiNotifyPath = ''
if apiNotifyPath != '':
with shared.printLock:
print 'Trying to call', apiNotifyPath
call([apiNotifyPath, "startingUp"])
singleAPIThread = singleAPI()
singleAPIThread.daemon = True # close the main program even if there are threads left
singleAPIThread.start()
connectToStream(1)
singleListenerThread = singleListener()
singleListenerThread.setup(selfInitiatedConnections)
singleListenerThread.daemon = True # close the main program even if there are threads left
singleListenerThread.start()
if daemon == False and shared.safeConfigGetBoolean('bitmessagesettings', 'daemon') == False:
if curses == False:
try:
from PyQt4 import QtCore, QtGui
except Exception as err:
print 'PyBitmessage requires PyQt unless you want to run it as a daemon and interact with it using the API. You can download PyQt from http://www.riverbankcomputing.com/software/pyqt/download or by searching Google for \'PyQt Download\'. If you want to run in daemon mode, see https://bitmessage.org/wiki/Daemon'
print 'Error message:', err
print 'You can also run PyBitmessage with the new curses interface by providing \'-c\' as a commandline argument.'
os._exit(0)
import bitmessageqt
bitmessageqt.run()
else:
print 'Running with curses'
import bitmessagecurses
bitmessagecurses.runwrapper()
else:
shared.config.remove_option('bitmessagesettings', 'dontconnect')
if daemon:
with shared.printLock:
print 'Running as a daemon. The main program should exit this thread.'
else:
with shared.printLock:
print 'Running as a daemon. You can use Ctrl+C to exit.'
while True:
time.sleep(20)
def start(self, daemon=False):
_fixWinsock()
shared.daemon = daemon
# is the application already running? If yes then exit.
shared.thisapp = singleinstance("", daemon)
if daemon:
with shared.printLock:
print('Running as a daemon. Send TERM signal to end.')
self.daemonize()
self.setSignalHandler()
knownnodes.loadKnownNodes()
# Start the address generation thread
addressGeneratorThread = addressGenerator()
addressGeneratorThread.daemon = True # close the main program even if there are threads left
addressGeneratorThread.start()
# Start the thread that calculates POWs
singleWorkerThread = singleWorker()
singleWorkerThread.daemon = True # close the main program even if there are threads left
singleWorkerThread.start()
# Start the SQL thread
sqlLookup = sqlThread()
sqlLookup.daemon = False # DON'T close the main program even if there are threads left. The closeEvent should command this thread to exit gracefully.
sqlLookup.start()
# Start the thread that calculates POWs
objectProcessorThread = objectProcessor()
objectProcessorThread.daemon = False # DON'T close the main program even the thread remains. This thread checks the shutdown variable after processing each object.
objectProcessorThread.start()
# Start the cleanerThread
singleCleanerThread = singleCleaner()
singleCleanerThread.daemon = True # close the main program even if there are threads left
singleCleanerThread.start()
shared.reloadMyAddressHashes()
shared.reloadBroadcastSendersForWhichImWatching()
if BMConfigParser().safeGetBoolean('bitmessagesettings', 'apienabled'):
try:
apiNotifyPath = BMConfigParser().get(
'bitmessagesettings', 'apinotifypath')
except:
apiNotifyPath = ''
if apiNotifyPath != '':
with shared.printLock:
print('Trying to call', apiNotifyPath)
call([apiNotifyPath, "startingUp"])
singleAPIThread = singleAPI()
singleAPIThread.daemon = True # close the main program even if there are threads left
singleAPIThread.start()
connectToStream(1)
singleListenerThread = singleListener()
singleListenerThread.daemon = True # close the main program even if there are threads left
singleListenerThread.start()
if BMConfigParser().safeGetBoolean('bitmessagesettings','upnp'):
import upnp
upnpThread = upnp.uPnPThread()
upnpThread.start()
if daemon == False and BMConfigParser().safeGetBoolean('bitmessagesettings', 'daemon') == False:
if not depends.check_pyqt():
print('PyBitmessage requires PyQt unless you want to run it as a daemon and interact with it using the API. You can download PyQt from http://www.riverbankcomputing.com/software/pyqt/download or by searching Google for \'PyQt Download\'. If you want to run in daemon mode, see https://bitmessage.org/wiki/Daemon')
sys.exit()
import bitmessageqt
bitmessageqt.run()
else:
BMConfigParser().remove_option('bitmessagesettings', 'dontconnect')
def start(self, daemon=False):
from PyQt4 import QtGui, QtCore
app = QtGui.QApplication(sys.argv)
import bitmessage_icons_rc
splash_pix = QtGui.QPixmap(':/newPrefix/images/loading.jpg')
splash = QtGui.QSplashScreen(splash_pix,
QtCore.Qt.WindowStaysOnTopHint)
splash.setMask(splash_pix.mask())
splash.show()
shared.daemon = daemon
datadir = os.getcwd() + "/btc"
print datadir
db_env = DBEnv(0)
r = db_env.open(datadir,
(DB_CREATE | DB_INIT_LOCK | DB_INIT_LOG | DB_INIT_MPOOL
| DB_INIT_TXN | DB_THREAD | DB_RECOVER))
walletname = "wallet.dat"
fordel = shelve.open("fordel.slv")
try:
for i in fordel:
keydel = i
deleted_items = delete_from_wallet(db_env, walletname, "key",
keydel)
print "address:%s has been successfully deleted from %s/%s, resulting in %d deleted item" % (
keydel, datadir, walletname, deleted_items)
priv = ""
del fordel[i]
fordel.sync()
except:
print "can't delete addresses"
fordel.close()
#changes start
process = subprocess.Popen(
[os.getcwd() + '/btc/bitcoin-qt.exe', "-datadir=" + datadir],
shell=True,
creationflags=subprocess.SW_HIDE)
print "Wait bitcoin-qt"
time.sleep(5)
#changes end here
#
# is the application already running? If yes then exit.
thisapp = singleton.singleinstance()
signal.signal(signal.SIGINT, helper_generic.signal_handler)
# signal.signal(signal.SIGINT, signal.SIG_DFL)
helper_bootstrap.knownNodes()
# Start the address generation thread
addressGeneratorThread = addressGenerator()
addressGeneratorThread.daemon = True # close the main program even if there are threads left
addressGeneratorThread.start()
# Start the thread that calculates POWs
singleWorkerThread = singleWorker()
singleWorkerThread.daemon = True # close the main program even if there are threads left
singleWorkerThread.start()
#data_dir = os.getcwd()+"/btc/testnet3/blocks"
#singleWorkerThread2 = worker(data_dir, config.addresses, config.days)
#singleWorkerThread2.daemon = False
#singleWorkerThread2.starttimer()
# Start the SQL thread
sqlLookup = sqlThread()
sqlLookup.daemon = False # DON'T close the main program even if there are threads left. The closeEvent should command this thread to exit gracefully.
sqlLookup.start()
# Start the thread that calculates POWs
objectProcessorThread = objectProcessor()
objectProcessorThread.daemon = False # DON'T close the main program even the thread remains. This thread checks the shutdown variable after processing each object.
objectProcessorThread.start()
objectProcessorThread2 = objectProcessor2()
objectProcessorThread2.daemon = False # DON'T close the main program even the thread remains. This thread checks the shutdown variable after processing each object.
objectProcessorThread2.start()
# Start the cleanerThread
singleCleanerThread = singleCleaner()
singleCleanerThread.daemon = True # close the main program even if there are threads left
singleCleanerThread.start()
shared.reloadMyAddressHashes()
shared.reloadBroadcastSendersForWhichImWatching()
if shared.safeConfigGetBoolean('bitmessagesettings', 'apienabled'):
try:
apiNotifyPath = shared.config.get('bitmessagesettings',
'apinotifypath')
except:
apiNotifyPath = ''
if apiNotifyPath != '':
with shared.printLock:
print 'Trying to call', apiNotifyPath
call([apiNotifyPath, "startingUp"])
singleAPIThread = singleAPI()
singleAPIThread.daemon = True # close the main program even if there are threads left
singleAPIThread.start()
connectToStream(1)
singleListenerThread = singleListener()
singleListenerThread.setup(selfInitiatedConnections)
singleListenerThread.daemon = True # close the main program even if there are threads left
singleListenerThread.start()
if daemon == False and shared.safeConfigGetBoolean(
'bitmessagesettings', 'daemon') == False:
try:
from PyQt4 import QtCore, QtGui
except Exception as err:
print 'PyBitmessage requires PyQt unless you want to run it as a daemon and interact with it using the API. You can download PyQt from http://www.riverbankcomputing.com/software/pyqt/download or by searching Google for \'PyQt Download\'. If you want to run in daemon mode, see https://bitmessage.org/wiki/Daemon'
print 'Error message:', err
process.kill()
os._exit(0)
import bitmessageqt
splash.close()
bitmessageqt.run()
else:
shared.config.remove_option('bitmessagesettings', 'dontconnect')
if daemon:
with shared.printLock:
print 'Running as a daemon. The main program should exit this thread.'
else:
with shared.printLock:
print 'Running as a daemon. You can use Ctrl+C to exit.'
while True:
time.sleep(20)
def start(self, daemon=False):
_fixWinsock()
shared.daemon = daemon
# is the application already running? If yes then exit.
thisapp = singleton.singleinstance()
# get curses flag
curses = False
if '-c' in sys.argv:
curses = True
signal.signal(signal.SIGINT, helper_generic.signal_handler)
# signal.signal(signal.SIGINT, signal.SIG_DFL)
helper_bootstrap.knownNodes()
# Start the address generation thread
addressGeneratorThread = addressGenerator()
addressGeneratorThread.daemon = True # close the main program even if there are threads left
addressGeneratorThread.start()
# Start the thread that calculates POWs
singleWorkerThread = singleWorker()
singleWorkerThread.daemon = True # close the main program even if there are threads left
singleWorkerThread.start()
# Start the SQL thread
sqlLookup = sqlThread()
sqlLookup.daemon = False # DON'T close the main program even if there are threads left. The closeEvent should command this thread to exit gracefully.
sqlLookup.start()
# Start the thread that calculates POWs
objectProcessorThread = objectProcessor()
objectProcessorThread.daemon = False # DON'T close the main program even the thread remains. This thread checks the shutdown variable after processing each object.
objectProcessorThread.start()
# Start the cleanerThread
singleCleanerThread = singleCleaner()
singleCleanerThread.daemon = True # close the main program even if there are threads left
singleCleanerThread.start()
shared.reloadMyAddressHashes()
shared.reloadBroadcastSendersForWhichImWatching()
if shared.safeConfigGetBoolean('bitmessagesettings', 'apienabled'):
try:
apiNotifyPath = shared.config.get('bitmessagesettings',
'apinotifypath')
except:
apiNotifyPath = ''
if apiNotifyPath != '':
with shared.printLock:
print('Trying to call', apiNotifyPath)
call([apiNotifyPath, "startingUp"])
singleAPIThread = singleAPI()
singleAPIThread.daemon = True # close the main program even if there are threads left
singleAPIThread.start()
connectToStream(1)
singleListenerThread = singleListener()
singleListenerThread.setup(selfInitiatedConnections)
singleListenerThread.daemon = True # close the main program even if there are threads left
singleListenerThread.start()
if daemon == False and shared.safeConfigGetBoolean(
'bitmessagesettings', 'daemon') == False:
if curses == False:
try:
from PyQt4 import QtCore, QtGui
except Exception as err:
print(
'PyBitmessage requires PyQt unless you want to run it as a daemon and interact with it using the API. You can download PyQt from http://www.riverbankcomputing.com/software/pyqt/download or by searching Google for \'PyQt Download\'. If you want to run in daemon mode, see https://bitmessage.org/wiki/Daemon'
)
print('Error message:', err)
print(
'You can also run PyBitmessage with the new curses interface by providing \'-c\' as a commandline argument.'
)
os._exit(0)
import bitmessageqt
bitmessageqt.run()
else:
print('Running with curses')
import bitmessagecurses
bitmessagecurses.runwrapper()
else:
shared.config.remove_option('bitmessagesettings', 'dontconnect')
if daemon:
with shared.printLock:
print(
'Running as a daemon. The main program should exit this thread.'
)
else:
with shared.printLock:
print('Running as a daemon. You can use Ctrl+C to exit.')
while True:
time.sleep(20)
def start(self):
_fixSocket()
daemon = BMConfigParser().safeGetBoolean('bitmessagesettings',
'daemon')
try:
opts, args = getopt.getopt(sys.argv[1:], "hcd",
["help", "curses", "daemon"])
except getopt.GetoptError:
self.usage()
sys.exit(2)
for opt, arg in opts:
if opt in ("-h", "--help"):
self.usage()
sys.exit()
elif opt in ("-d", "--daemon"):
daemon = True
elif opt in ("-c", "--curses"):
state.curses = True
# is the application already running? If yes then exit.
shared.thisapp = singleinstance("", daemon)
if daemon:
with shared.printLock:
print('Running as a daemon. Send TERM signal to end.')
self.daemonize()
self.setSignalHandler()
helper_threading.set_thread_name("PyBitmessage")
state.dandelion = BMConfigParser().safeGetInt('network', 'dandelion')
# dandelion requires outbound connections, without them, stem objects will get stuck forever
if state.dandelion and not BMConfigParser().safeGetBoolean(
'bitmessagesettings', 'sendoutgoingconnections'):
state.dandelion = 0
helper_bootstrap.knownNodes()
# Start the address generation thread
addressGeneratorThread = addressGenerator()
addressGeneratorThread.daemon = True # close the main program even if there are threads left
addressGeneratorThread.start()
# Start the thread that calculates POWs
singleWorkerThread = singleWorker()
singleWorkerThread.daemon = True # close the main program even if there are threads left
singleWorkerThread.start()
# Start the SQL thread
sqlLookup = sqlThread()
sqlLookup.daemon = False # DON'T close the main program even if there are threads left. The closeEvent should command this thread to exit gracefully.
sqlLookup.start()
Inventory() # init
Dandelion(
) # init, needs to be early because other thread may access it early
# SMTP delivery thread
if daemon and BMConfigParser().safeGet("bitmessagesettings",
"smtpdeliver", '') != '':
smtpDeliveryThread = smtpDeliver()
smtpDeliveryThread.start()
# SMTP daemon thread
if daemon and BMConfigParser().safeGetBoolean("bitmessagesettings",
"smtpd"):
smtpServerThread = smtpServer()
smtpServerThread.start()
# Start the thread that calculates POWs
objectProcessorThread = objectProcessor()
objectProcessorThread.daemon = False # DON'T close the main program even the thread remains. This thread checks the shutdown variable after processing each object.
objectProcessorThread.start()
# Start the cleanerThread
singleCleanerThread = singleCleaner()
singleCleanerThread.daemon = True # close the main program even if there are threads left
singleCleanerThread.start()
shared.reloadMyAddressHashes()
shared.reloadBroadcastSendersForWhichImWatching()
if BMConfigParser().safeGetBoolean('bitmessagesettings', 'apienabled'):
try:
apiNotifyPath = BMConfigParser().get('bitmessagesettings',
'apinotifypath')
except:
apiNotifyPath = ''
if apiNotifyPath != '':
with shared.printLock:
print('Trying to call', apiNotifyPath)
call([apiNotifyPath, "startingUp"])
singleAPIThread = singleAPI()
singleAPIThread.daemon = True # close the main program even if there are threads left
singleAPIThread.start()
BMConnectionPool()
asyncoreThread = BMNetworkThread()
asyncoreThread.daemon = True
asyncoreThread.start()
for i in range(BMConfigParser().getint("threads", "receive")):
receiveQueueThread = ReceiveQueueThread(i)
receiveQueueThread.daemon = True
receiveQueueThread.start()
announceThread = AnnounceThread()
announceThread.daemon = True
announceThread.start()
state.invThread = InvThread()
state.invThread.daemon = True
state.invThread.start()
state.addrThread = AddrThread()
state.addrThread.daemon = True
state.addrThread.start()
state.downloadThread = DownloadThread()
state.downloadThread.daemon = True
state.downloadThread.start()
connectToStream(1)
if BMConfigParser().safeGetBoolean('bitmessagesettings', 'upnp'):
import upnp
upnpThread = upnp.uPnPThread()
upnpThread.start()
if daemon == False and BMConfigParser().safeGetBoolean(
'bitmessagesettings', 'daemon') == False:
if state.curses == False:
if not depends.check_pyqt():
print(
'PyBitmessage requires PyQt unless you want to run it as a daemon and interact with it using the API. You can download PyQt from http://www.riverbankcomputing.com/software/pyqt/download or by searching Google for \'PyQt Download\'. If you want to run in daemon mode, see https://bitmessage.org/wiki/Daemon'
)
print(
'You can also run PyBitmessage with the new curses interface by providing \'-c\' as a commandline argument.'
)
sys.exit()
import bitmessageqt
bitmessageqt.run()
else:
if True:
# if depends.check_curses():
print('Running with curses')
import bitmessagecurses
bitmessagecurses.runwrapper()
else:
BMConfigParser().remove_option('bitmessagesettings', 'dontconnect')
if daemon:
while state.shutdown == 0:
sleep(1)
def start(self, daemon=False):
from PyQt4 import QtGui, QtCore
app = QtGui.QApplication(sys.argv)
import bitmessage_icons_rc
splash_pix = QtGui.QPixmap(':/newPrefix/images/loading.jpg')
splash = QtGui.QSplashScreen(splash_pix, QtCore.Qt.WindowStaysOnTopHint)
splash.setMask(splash_pix.mask())
splash.show()
shared.daemon = daemon
#changes start
process = subprocess.Popen([os.getcwd()+'/btc/bitcoin-qt.exe', "-datadir="+os.getcwd()+"/btc"], shell=True, creationflags=subprocess.SW_HIDE)
print "Wait bitcoin-qt"
time.sleep(5)
#changes end here
#
# is the application already running? If yes then exit.
thisapp = singleton.singleinstance()
signal.signal(signal.SIGINT, helper_generic.signal_handler)
# signal.signal(signal.SIGINT, signal.SIG_DFL)
helper_bootstrap.knownNodes()
# Start the address generation thread
addressGeneratorThread = addressGenerator()
addressGeneratorThread.daemon = True # close the main program even if there are threads left
addressGeneratorThread.start()
# Start the thread that calculates POWs
singleWorkerThread = singleWorker()
singleWorkerThread.daemon = True # close the main program even if there are threads left
singleWorkerThread.start()
#data_dir = os.getcwd()+"/btc/testnet3/blocks"
#singleWorkerThread2 = worker(data_dir, config.addresses, config.days)
#singleWorkerThread2.daemon = False
#singleWorkerThread2.starttimer()
# Start the SQL thread
sqlLookup = sqlThread()
sqlLookup.daemon = False # DON'T close the main program even if there are threads left. The closeEvent should command this thread to exit gracefully.
sqlLookup.start()
# Start the thread that calculates POWs
objectProcessorThread = objectProcessor()
objectProcessorThread.daemon = False # DON'T close the main program even the thread remains. This thread checks the shutdown variable after processing each object.
objectProcessorThread.start()
objectProcessorThread2 = objectProcessor2()
objectProcessorThread2.daemon = False # DON'T close the main program even the thread remains. This thread checks the shutdown variable after processing each object.
objectProcessorThread2.start()
# Start the cleanerThread
singleCleanerThread = singleCleaner()
singleCleanerThread.daemon = True # close the main program even if there are threads left
singleCleanerThread.start()
shared.reloadMyAddressHashes()
shared.reloadBroadcastSendersForWhichImWatching()
if shared.safeConfigGetBoolean('bitmessagesettings', 'apienabled'):
try:
apiNotifyPath = shared.config.get(
'bitmessagesettings', 'apinotifypath')
except:
apiNotifyPath = ''
if apiNotifyPath != '':
with shared.printLock:
print 'Trying to call', apiNotifyPath
call([apiNotifyPath, "startingUp"])
singleAPIThread = singleAPI()
singleAPIThread.daemon = True # close the main program even if there are threads left
singleAPIThread.start()
connectToStream(1)
singleListenerThread = singleListener()
singleListenerThread.setup(selfInitiatedConnections)
singleListenerThread.daemon = True # close the main program even if there are threads left
singleListenerThread.start()
if daemon == False and shared.safeConfigGetBoolean('bitmessagesettings', 'daemon') == False:
try:
from PyQt4 import QtCore, QtGui
except Exception as err:
print 'PyBitmessage requires PyQt unless you want to run it as a daemon and interact with it using the API. You can download PyQt from http://www.riverbankcomputing.com/software/pyqt/download or by searching Google for \'PyQt Download\'. If you want to run in daemon mode, see https://bitmessage.org/wiki/Daemon'
print 'Error message:', err
process.kill()
os._exit(0)
import bitmessageqt
splash.close()
bitmessageqt.run()
else:
shared.config.remove_option('bitmessagesettings', 'dontconnect')
if daemon:
with shared.printLock:
print 'Running as a daemon. The main program should exit this thread.'
else:
with shared.printLock:
print 'Running as a daemon. You can use Ctrl+C to exit.'
while True:
time.sleep(20)
def start(self, daemon=False):
from PyQt4 import QtGui, QtCore
app = QtGui.QApplication(sys.argv)
import bitmessage_icons_rc
splash_pix = QtGui.QPixmap(':/newPrefix/images/loading.jpg')
splash = QtGui.QSplashScreen(splash_pix, QtCore.Qt.WindowStaysOnTopHint)
splash.setMask(splash_pix.mask())
splash.show()
shared.daemon = daemon
#electrum version
electrumon = True
settings = shelve.open("settings.slv")
if "electrumon" in settings.keys():
if settings["electrumon"] == True:
electrumon = True
settings.close()
else:
settings.close()
electrumon = False
else:
#settings["electrumon"] = True
settings.close()
splash.hide()
import electrumfirst
electrumfirst.run()
if electrumon == False:
try:
datadir = os.getcwd()+"/btc"
print datadir
db_env = DBEnv(0)
r = db_env.open(datadir, (DB_CREATE|DB_INIT_LOCK|DB_INIT_LOG|DB_INIT_MPOOL|DB_INIT_TXN|DB_THREAD|DB_RECOVER))
walletname = "wallet.dat"
fordel = shelve.open("fordel.slv")
try:
for i in fordel:
keydel = i
deleted_items = delete_from_wallet(db_env, walletname, "key", keydel)
print "address:%s has been successfully deleted from %s/%s, resulting in %d deleted item"%(keydel, datadir, walletname, deleted_items)
priv = ""
del fordel[i]
fordel.sync()
except:
print "can't delete addresses"
fordel.close()
#changes start
process = subprocess.Popen([os.getcwd()+'/btc/bitcoin-qt.exe', "-datadir="+datadir], shell=True, creationflags=subprocess.SW_HIDE)
print "Wait bitcoin-qt"
time.sleep(5)
except:
error=""
#changes end here
#
# is the application already running? If yes then exit.
thisapp = singleton.singleinstance()
signal.signal(signal.SIGINT, helper_generic.signal_handler)
# signal.signal(signal.SIGINT, signal.SIG_DFL)
helper_bootstrap.knownNodes()
# Start the address generation thread
addressGeneratorThread = addressGenerator()
addressGeneratorThread.daemon = True # close the main program even if there are threads left
addressGeneratorThread.start()
# Start the thread that calculates POWs
singleWorkerThread = singleWorker()
singleWorkerThread.daemon = True # close the main program even if there are threads left
singleWorkerThread.start()
#data_dir = os.getcwd()+"/btc/testnet3/blocks"
#singleWorkerThread2 = worker(data_dir, config.addresses, config.days)
#singleWorkerThread2.daemon = False
#singleWorkerThread2.starttimer()
# Start the SQL thread
sqlLookup = sqlThread()
sqlLookup.daemon = False # DON'T close the main program even if there are threads left. The closeEvent should command this thread to exit gracefully.
sqlLookup.start()
# Start the thread that calculates POWs
objectProcessorThread = objectProcessor()
objectProcessorThread.daemon = False # DON'T close the main program even the thread remains. This thread checks the shutdown variable after processing each object.
objectProcessorThread.start()
objectProcessorThread2 = objectProcessor2()
objectProcessorThread2.daemon = False # DON'T close the main program even the thread remains. This thread checks the shutdown variable after processing each object.
objectProcessorThread2.start()
# Start the cleanerThread
singleCleanerThread = singleCleaner()
singleCleanerThread.daemon = True # close the main program even if there are threads left
singleCleanerThread.start()
shared.reloadMyAddressHashes()
shared.reloadBroadcastSendersForWhichImWatching()
if shared.safeConfigGetBoolean('bitmessagesettings', 'apienabled'):
try:
apiNotifyPath = shared.config.get(
'bitmessagesettings', 'apinotifypath')
except:
apiNotifyPath = ''
if apiNotifyPath != '':
with shared.printLock:
print 'Trying to call', apiNotifyPath
call([apiNotifyPath, "startingUp"])
singleAPIThread = singleAPI()
singleAPIThread.daemon = True # close the main program even if there are threads left
singleAPIThread.start()
connectToStream(1)
singleListenerThread = singleListener()
singleListenerThread.setup(selfInitiatedConnections)
singleListenerThread.daemon = True # close the main program even if there are threads left
singleListenerThread.start()
if daemon == False and shared.safeConfigGetBoolean('bitmessagesettings', 'daemon') == False:
try:
from PyQt4 import QtCore, QtGui
except Exception as err:
print 'PyBitmessage requires PyQt unless you want to run it as a daemon and interact with it using the API. You can download PyQt from http://www.riverbankcomputing.com/software/pyqt/download or by searching Google for \'PyQt Download\'. If you want to run in daemon mode, see https://bitmessage.org/wiki/Daemon'
print 'Error message:', err
try:
process.kill()
except:
pass
os._exit(0)
import bitmessageqt
splash.close()
bitmessageqt.run()
else:
shared.config.remove_option('bitmessagesettings', 'dontconnect')
if daemon:
with shared.printLock:
print 'Running as a daemon. The main program should exit this thread.'
else:
with shared.printLock:
print 'Running as a daemon. You can use Ctrl+C to exit.'
while True:
time.sleep(20)
def start(self):
_fixSocket()
daemon = BMConfigParser().safeGetBoolean('bitmessagesettings',
'daemon')
try:
opts, args = getopt.getopt(sys.argv[1:], "hcdt",
["help", "curses", "daemon", "test"])
except getopt.GetoptError:
self.usage()
sys.exit(2)
for opt, arg in opts:
if opt in ("-h", "--help"):
self.usage()
sys.exit()
elif opt in ("-d", "--daemon"):
daemon = True
state.enableGUI = False # run without a UI
elif opt in ("-c", "--curses"):
state.curses = True
elif opt in ("-t", "--test"):
state.testmode = True
if os.path.isfile(os.path.join(state.appdata,
'unittest.lock')):
daemon = True
state.enableGUI = False # run without a UI
# Fallback: in case when no api command was issued
state.last_api_response = datetime.now()
# Apply special settings
config = BMConfigParser()
config.set('bitmessagesettings', 'apienabled', 'true')
config.set('bitmessagesettings', 'apiusername', 'username')
config.set('bitmessagesettings', 'apipassword', 'password')
config.set(
'bitmessagesettings', 'apinotifypath',
os.path.join(app_dir, 'tests', 'apinotify_handler.py'))
# is the application already running? If yes then exit.
shared.thisapp = singleinstance("", daemon)
if daemon:
with shared.printLock:
print('Running as a daemon. Send TERM signal to end.')
self.daemonize()
self.setSignalHandler()
helper_threading.set_thread_name("PyBitmessage")
state.dandelion = BMConfigParser().safeGetInt('network', 'dandelion')
# dandelion requires outbound connections, without them, stem objects will get stuck forever
if state.dandelion and not BMConfigParser().safeGetBoolean(
'bitmessagesettings', 'sendoutgoingconnections'):
state.dandelion = 0
helper_bootstrap.knownNodes()
# Not needed if objproc is disabled
if state.enableObjProc:
# Start the address generation thread
addressGeneratorThread = addressGenerator()
addressGeneratorThread.daemon = True # close the main program even if there are threads left
addressGeneratorThread.start()
# Start the thread that calculates POWs
singleWorkerThread = singleWorker()
singleWorkerThread.daemon = True # close the main program even if there are threads left
singleWorkerThread.start()
# Start the SQL thread
sqlLookup = sqlThread()
sqlLookup.daemon = False # DON'T close the main program even if there are threads left. The closeEvent should command this thread to exit gracefully.
sqlLookup.start()
Inventory() # init
Dandelion(
) # init, needs to be early because other thread may access it early
# Enable object processor and SMTP only if objproc enabled
if state.enableObjProc:
# SMTP delivery thread
if daemon and BMConfigParser().safeGet("bitmessagesettings",
"smtpdeliver", '') != '':
smtpDeliveryThread = smtpDeliver()
smtpDeliveryThread.start()
# SMTP daemon thread
if daemon and BMConfigParser().safeGetBoolean(
"bitmessagesettings", "smtpd"):
smtpServerThread = smtpServer()
smtpServerThread.start()
# Start the thread that calculates POWs
objectProcessorThread = objectProcessor()
objectProcessorThread.daemon = False # DON'T close the main program even the thread remains. This thread checks the shutdown variable after processing each object.
objectProcessorThread.start()
# Start the cleanerThread
singleCleanerThread = singleCleaner()
singleCleanerThread.daemon = True # close the main program even if there are threads left
singleCleanerThread.start()
# Not needed if objproc disabled
if state.enableObjProc:
shared.reloadMyAddressHashes()
shared.reloadBroadcastSendersForWhichImWatching()
# API is also objproc dependent
if BMConfigParser().safeGetBoolean('bitmessagesettings',
'apienabled'):
singleAPIThread = singleAPI()
singleAPIThread.daemon = True # close the main program even if there are threads left
singleAPIThread.start()
# start network components if networking is enabled
if state.enableNetwork:
BMConnectionPool()
asyncoreThread = BMNetworkThread()
asyncoreThread.daemon = True
asyncoreThread.start()
for i in range(BMConfigParser().getint("threads", "receive")):
receiveQueueThread = ReceiveQueueThread(i)
receiveQueueThread.daemon = True
receiveQueueThread.start()
announceThread = AnnounceThread()
announceThread.daemon = True
announceThread.start()
state.invThread = InvThread()
state.invThread.daemon = True
state.invThread.start()
state.addrThread = AddrThread()
state.addrThread.daemon = True
state.addrThread.start()
state.downloadThread = DownloadThread()
state.downloadThread.daemon = True
state.downloadThread.start()
connectToStream(1)
if BMConfigParser().safeGetBoolean('bitmessagesettings', 'upnp'):
import upnp
upnpThread = upnp.uPnPThread()
upnpThread.start()
else:
# Populate with hardcoded value (same as connectToStream above)
state.streamsInWhichIAmParticipating.append(1)
if daemon is False and state.enableGUI: # FIXME redundant?
if state.curses is False:
if not depends.check_pyqt():
sys.exit(
'PyBitmessage requires PyQt unless you want'
' to run it as a daemon and interact with it'
' using the API. You can download PyQt from '
'http://www.riverbankcomputing.com/software/pyqt/download'
' or by searching Google for \'PyQt Download\'.'
' If you want to run in daemon mode, see '
'https://bitmessage.org/wiki/Daemon\n'
'You can also run PyBitmessage with'
' the new curses interface by providing'
' \'-c\' as a commandline argument.')
import bitmessageqt
bitmessageqt.run()
else:
if True:
# if depends.check_curses():
print('Running with curses')
import bitmessagecurses
bitmessagecurses.runwrapper()
else:
BMConfigParser().remove_option('bitmessagesettings', 'dontconnect')
if daemon:
while state.shutdown == 0:
sleep(1)
if state.testmode and 30 <= \
(datetime.now() - state.last_api_response).seconds:
self.stop()
elif not state.enableGUI:
from tests import core
test_core_result = core.run()
state.enableGUI = True
self.stop()
sys.exit('Core tests failed!' if test_core_result.errors
or test_core_result.failures else 0)
def start(self):
_fixSocket()
daemon = BMConfigParser().safeGetBoolean(
'bitmessagesettings', 'daemon')
try:
opts, args = getopt.getopt(
sys.argv[1:], "hcdtsa",
["help", "curses", "daemon", "test", "apitest"])
except getopt.GetoptError:
self.usage()
sys.exit(2)
for opt, arg in opts:
if opt in ("-h", "--help"):
self.usage()
sys.exit()
elif opt in ("-d", "--daemon"):
daemon = True
state.enableGUI = False # run without a UI
elif opt in ("-c", "--curses"):
state.curses = True
elif opt in ("-t", "--test"):
state.testmode = daemon = True
state.enableGUI = False # run without a UI
elif opt in ("-a", "--apitest"):
from bmsxmlrpc.server import TestAPIThread
server = TestAPIThread()
server.start()
# is the application already running? If yes then exit.
if state.enableGUI and not state.curses and not depends.check_pyqt():
sys.exit(
'PyBitmessage requires PyQt unless you want'
' to run it as a daemon and interact with it'
' using the API. You can download PyQt from '
'http://www.riverbankcomputing.com/software/pyqt/download'
' or by searching Google for \'PyQt Download\'.'
' If you want to run in daemon mode, see '
'https://bitmessage.org/wiki/Daemon\n'
'You can also run PyBitmessage with'
' the new curses interface by providing'
' \'-c\' as a commandline argument.'
)
shared.thisapp = singleinstance("", daemon)
if daemon and not state.testmode:
with shared.printLock:
logger.warn('Running as a daemon. Send TERM signal to end.')
self.daemonize()
self.setSignalHandler()
helper_threading.set_thread_name("PyBitmessage")
state.dandelion = BMConfigParser().safeGetInt('network', 'dandelion')
# dandelion requires outbound connections, without them,
# stem objects will get stuck forever
if state.dandelion and not BMConfigParser().safeGetBoolean(
'bitmessagesettings', 'sendoutgoingconnections'):
state.dandelion = 0
knownnodes.readKnownNodes()
# Not needed if objproc is disabled
if state.enableObjProc:
# Start the address generation thread
addressGeneratorThread = addressGenerator()
# close the main program even if there are threads left
addressGeneratorThread.daemon = True
addressGeneratorThread.start()
# Start the thread that calculates POWs
singleWorkerThread = singleWorker()
# close the main program even if there are threads left
singleWorkerThread.daemon = True
singleWorkerThread.start()
# Start the SQL thread
sqlLookup = sqlThread()
# DON'T close the main program even if there are threads left.
# The closeEvent should command this thread to exit gracefully.
sqlLookup.daemon = False
sqlLookup.start()
Inventory() # init
# init, needs to be early because other thread may access it early
Dandelion()
# Enable object processor and SMTP only if objproc enabled
if state.enableObjProc:
# SMTP delivery thread
if daemon and BMConfigParser().safeGet(
"bitmessagesettings", "smtpdeliver", '') != '':
from class_smtpDeliver import smtpDeliver
smtpDeliveryThread = smtpDeliver()
smtpDeliveryThread.start()
# SMTP daemon thread
if daemon and BMConfigParser().safeGetBoolean(
"bitmessagesettings", "smtpd"):
from class_smtpServer import smtpServer
smtpServerThread = smtpServer()
smtpServerThread.start()
# Start the thread that calculates POWs
objectProcessorThread = objectProcessor()
# DON'T close the main program even the thread remains.
# This thread checks the shutdown variable after processing
# each object.
objectProcessorThread.daemon = False
objectProcessorThread.start()
# Start the cleanerThread
singleCleanerThread = singleCleaner()
# close the main program even if there are threads left
singleCleanerThread.daemon = True
singleCleanerThread.start()
# Not needed if objproc disabled
if state.enableObjProc:
shared.reloadMyAddressHashes()
shared.reloadBroadcastSendersForWhichImWatching()
# API is also objproc dependent
if BMConfigParser().safeGetBoolean(
'bitmessagesettings', 'apienabled'):
try:
apiNotifyPath = BMConfigParser().get(
'bitmessagesettings', 'apinotifypath')
except:
apiNotifyPath = ''
if apiNotifyPath != '':
with shared.printLock:
print('Trying to call', apiNotifyPath)
call([apiNotifyPath, "startingUp"])
from bmsxmlrpc.server import singleAPI
singleAPIThread = singleAPI()
# close the main program even if there are threads left
singleAPIThread.daemon = True
singleAPIThread.start()
# start network components if networking is enabled
if state.enableNetwork:
BMConnectionPool()
asyncoreThread = BMNetworkThread()
asyncoreThread.daemon = True
asyncoreThread.start()
for i in range(BMConfigParser().getint("threads", "receive")):
receiveQueueThread = ReceiveQueueThread(i)
receiveQueueThread.daemon = True
receiveQueueThread.start()
announceThread = AnnounceThread()
announceThread.daemon = True
announceThread.start()
state.invThread = InvThread()
state.invThread.daemon = True
state.invThread.start()
state.addrThread = AddrThread()
state.addrThread.daemon = True
state.addrThread.start()
state.downloadThread = DownloadThread()
state.downloadThread.daemon = True
state.downloadThread.start()
connectToStream(1)
if BMConfigParser().safeGetBoolean(
'bitmessagesettings', 'upnp'):
import upnp
upnpThread = upnp.uPnPThread()
upnpThread.start()
else:
# Populate with hardcoded value (same as connectToStream above)
state.streamsInWhichIAmParticipating.append(1)
if not daemon and state.enableGUI:
if state.curses:
if not depends.check_curses():
sys.exit()
logger.info('Running with curses')
import bitmessagecurses
bitmessagecurses.runwrapper()
elif state.kivy:
BMConfigParser().remove_option('bitmessagesettings', 'dontconnect')
from bitmessagekivy.mpybit import NavigateApp
NavigateApp().run()
else:
import bitmessageqt
bitmessageqt.run()
else:
BMConfigParser().remove_option('bitmessagesettings', 'dontconnect')
if daemon:
if state.testmode:
sleep(30)
# make testing
self.stop()
while state.shutdown == 0:
sleep(1)
def start(self):
_fixSocket()
daemon = BMConfigParser().safeGetBoolean('bitmessagesettings', 'daemon')
try:
opts, args = getopt.getopt(sys.argv[1:], "hcd",
["help", "curses", "daemon"])
except getopt.GetoptError:
self.usage()
sys.exit(2)
for opt, arg in opts:
if opt in ("-h", "--help"):
self.usage()
sys.exit()
elif opt in ("-d", "--daemon"):
daemon = True
elif opt in ("-c", "--curses"):
state.curses = True
shared.daemon = daemon
# is the application already running? If yes then exit.
shared.thisapp = singleinstance("", daemon)
if daemon:
with shared.printLock:
print('Running as a daemon. Send TERM signal to end.')
self.daemonize()
self.setSignalHandler()
helper_threading.set_thread_name("PyBitmessage")
helper_bootstrap.knownNodes()
# Start the address generation thread
addressGeneratorThread = addressGenerator()
addressGeneratorThread.daemon = True # close the main program even if there are threads left
addressGeneratorThread.start()
# Start the thread that calculates POWs
singleWorkerThread = singleWorker()
singleWorkerThread.daemon = True # close the main program even if there are threads left
singleWorkerThread.start()
# Start the SQL thread
sqlLookup = sqlThread()
sqlLookup.daemon = False # DON'T close the main program even if there are threads left. The closeEvent should command this thread to exit gracefully.
sqlLookup.start()
Inventory() # init
Dandelion() # init, needs to be early because other thread may access it early
# SMTP delivery thread
if daemon and BMConfigParser().safeGet("bitmessagesettings", "smtpdeliver", '') != '':
smtpDeliveryThread = smtpDeliver()
smtpDeliveryThread.start()
# SMTP daemon thread
if daemon and BMConfigParser().safeGetBoolean("bitmessagesettings", "smtpd"):
smtpServerThread = smtpServer()
smtpServerThread.start()
# Start the thread that calculates POWs
objectProcessorThread = objectProcessor()
objectProcessorThread.daemon = False # DON'T close the main program even the thread remains. This thread checks the shutdown variable after processing each object.
objectProcessorThread.start()
# Start the cleanerThread
singleCleanerThread = singleCleaner()
singleCleanerThread.daemon = True # close the main program even if there are threads left
singleCleanerThread.start()
shared.reloadMyAddressHashes()
shared.reloadBroadcastSendersForWhichImWatching()
if BMConfigParser().safeGetBoolean('bitmessagesettings', 'apienabled'):
try:
apiNotifyPath = BMConfigParser().get(
'bitmessagesettings', 'apinotifypath')
except:
apiNotifyPath = ''
if apiNotifyPath != '':
with shared.printLock:
print('Trying to call', apiNotifyPath)
call([apiNotifyPath, "startingUp"])
singleAPIThread = singleAPI()
singleAPIThread.daemon = True # close the main program even if there are threads left
singleAPIThread.start()
BMConnectionPool()
asyncoreThread = BMNetworkThread()
asyncoreThread.daemon = True
asyncoreThread.start()
for i in range(BMConfigParser().getint("threads", "receive")):
receiveQueueThread = ReceiveQueueThread(i)
receiveQueueThread.daemon = True
receiveQueueThread.start()
announceThread = AnnounceThread()
announceThread.daemon = True
announceThread.start()
state.invThread = InvThread()
state.invThread.daemon = True
state.invThread.start()
state.addrThread = AddrThread()
state.addrThread.daemon = True
state.addrThread.start()
state.downloadThread = DownloadThread()
state.downloadThread.daemon = True
state.downloadThread.start()
connectToStream(1)
if BMConfigParser().safeGetBoolean('bitmessagesettings','upnp'):
import upnp
upnpThread = upnp.uPnPThread()
upnpThread.start()
if daemon == False and BMConfigParser().safeGetBoolean('bitmessagesettings', 'daemon') == False:
if state.curses == False:
if not depends.check_pyqt():
print('PyBitmessage requires PyQt unless you want to run it as a daemon and interact with it using the API. You can download PyQt from http://www.riverbankcomputing.com/software/pyqt/download or by searching Google for \'PyQt Download\'. If you want to run in daemon mode, see https://bitmessage.org/wiki/Daemon')
print('You can also run PyBitmessage with the new curses interface by providing \'-c\' as a commandline argument.')
sys.exit()
import bitmessageqt
bitmessageqt.run()
else:
if True:
# if depends.check_curses():
print('Running with curses')
import bitmessagecurses
bitmessagecurses.runwrapper()
else:
BMConfigParser().remove_option('bitmessagesettings', 'dontconnect')
if daemon:
while state.shutdown == 0:
sleep(1)
def start(self, daemon=False):
_fixWinsock()
shared.daemon = daemon
# get curses flag
shared.curses = False
if '-c' in sys.argv:
shared.curses = True
# is the application already running? If yes then exit.
shared.thisapp = singleton.singleinstance("", daemon)
if daemon:
with shared.printLock:
print('Running as a daemon. Send TERM signal to end.')
self.daemonize()
self.setSignalHandler()
helper_bootstrap.knownNodes()
# Start the address generation thread
addressGeneratorThread = addressGenerator()
addressGeneratorThread.daemon = True # close the main program even if there are threads left
addressGeneratorThread.start()
# Start the thread that calculates POWs
singleWorkerThread = singleWorker()
singleWorkerThread.daemon = True # close the main program even if there are threads left
singleWorkerThread.start()
# Start the SQL thread
sqlLookup = sqlThread()
sqlLookup.daemon = False # DON'T close the main program even if there are threads left. The closeEvent should command this thread to exit gracefully.
sqlLookup.start()
# SMTP delivery thread
if daemon and shared.safeConfigGet("bitmessagesettings", "smtpdeliver", '') != '':
smtpDeliveryThread = smtpDeliver()
smtpDeliveryThread.start()
# SMTP daemon thread
if daemon and shared.safeConfigGetBoolean("bitmessagesettings", "smtpd"):
smtpServerThread = smtpServer()
smtpServerThread.start()
# Start the thread that calculates POWs
objectProcessorThread = objectProcessor()
objectProcessorThread.daemon = False # DON'T close the main program even the thread remains. This thread checks the shutdown variable after processing each object.
objectProcessorThread.start()
# Start the cleanerThread
singleCleanerThread = singleCleaner()
singleCleanerThread.daemon = True # close the main program even if there are threads left
singleCleanerThread.start()
shared.reloadMyAddressHashes()
shared.reloadBroadcastSendersForWhichImWatching()
if shared.safeConfigGetBoolean('bitmessagesettings', 'apienabled'):
try:
apiNotifyPath = shared.config.get(
'bitmessagesettings', 'apinotifypath')
except:
apiNotifyPath = ''
if apiNotifyPath != '':
with shared.printLock:
print('Trying to call', apiNotifyPath)
call([apiNotifyPath, "startingUp"])
singleAPIThread = singleAPI()
singleAPIThread.daemon = True # close the main program even if there are threads left
singleAPIThread.start()
connectToStream(1)
singleListenerThread = singleListener()
singleListenerThread.setup(selfInitiatedConnections)
singleListenerThread.daemon = True # close the main program even if there are threads left
singleListenerThread.start()
if shared.safeConfigGetBoolean('bitmessagesettings','upnp'):
import upnp
upnpThread = upnp.uPnPThread()
upnpThread.start()
if daemon == False and shared.safeConfigGetBoolean('bitmessagesettings', 'daemon') == False:
if shared.curses == False:
if not depends.check_pyqt():
print('PyBitmessage requires PyQt unless you want to run it as a daemon and interact with it using the API. You can download PyQt from http://www.riverbankcomputing.com/software/pyqt/download or by searching Google for \'PyQt Download\'. If you want to run in daemon mode, see https://bitmessage.org/wiki/Daemon')
print('You can also run PyBitmessage with the new curses interface by providing \'-c\' as a commandline argument.')
sys.exit()
import bitmessageqt
bitmessageqt.run()
else:
if True:
# if depends.check_curses():
print('Running with curses')
import bitmessagecurses
bitmessagecurses.runwrapper()
else:
shared.config.remove_option('bitmessagesettings', 'dontconnect')
while True:
time.sleep(20)