def deploy(self, inputparams):
print(inputparams)
if len(inputparams) == 0:
sols = list_files(contracts_dir + "/*.sol")
for sol in sols:
print(sol + ".sol")
return
"""deploy abi bin file"""
# must be at least 2 params
common.check_param_num(inputparams, 1)
contractname = inputparams[0].strip()
# need save address whether or not
needSaveAddress = True
args_len = len(inputparams)
# need save address whether or not
needSaveAddress = False
args_len = len(inputparams)
if inputparams[-1] == "save":
needSaveAddress = True
args_len = len(inputparams) - 1
# get the args
fn_args = inputparams[1:args_len]
tx_client = transaction_common.TransactionCommon(
"", contracts_dir, contractname)
try:
receipt = tx_client.send_transaction_getReceipt(None,
fn_args,
deploy=True)[0]
print("INFO >> client info: {}".format(tx_client.getinfo()))
print("deploy result for [{}] is:\n {}".format(
contractname, json.dumps(receipt, indent=4)))
name = contractname
address = receipt["contractAddress"]
blocknum = int(receipt["blockNumber"], 16)
txhash = receipt["transactionHash"]
ContractNote.save_contract_address(name, address)
print("on block : {},address: {} ".format(blocknum, address))
if needSaveAddress is True:
ContractNote.save_address_to_contract_note(name, address)
print("address save to file: ",
client_config.contract_info_file)
else:
print("""\nNOTE : if want to save new address as last
address for (call/sendtx)\nadd 'save' to cmdline and run again"""
)
ContractNote.save_history(name, address, blocknum, txhash)
data_parser = DatatypeParser(default_abi_file(contractname))
# 解析receipt里的log 和 相关的tx ,output
print_receipt_logs_and_txoutput(tx_client, receipt, "",
data_parser)
except Exception as e:
print("deploy exception! ", e)
traceback.print_exc()
tx_client.finish()
# 部署合约
print(
"\n>>Deploy:---------------------------------------------------------------------"
)
with open(r"sample\SimpleInfo.bin", 'r') as load_f:
contract_bin = load_f.read()
load_f.close()
result = client.deploy(contract_bin)
print("deploy", result)
print("new address : ", result["contractAddress"])
contract_name = contractname = os.path.splitext(
os.path.basename(contractFile))[0]
memo = "tx:" + result["transactionHash"]
# 把部署结果存入文件备查
ContractNote.save_address_to_contract_note(contract_name,
result["contractAddress"],
int(result["blockNumber"],
16), memo)
# 发送交易，调用一个改写数据的接口
print(
"\n>>sendRawTransaction:----------------------------------------------------------"
)
to_address = result['contractAddress'] # use new deploy address
args = [
'simplename', 2024,
to_checksum_address('0x7029c502b4F824d19Bd7921E9cb74Ef92392FB1c')
]
receipt = client.sendRawTransactionGetReceipt(to_address, contract_abi, "set",
args)
print(receipt)
# 解析receipt里的log
def main(argv):
try:
usagemsg = usage(client_config)
cmd, inputparams = parse_commands(argv)
precompile = Precompile(cmd, inputparams,
contracts_dir + "/precompile")
# check cmd
valid = check_cmd(cmd, validcmds)
if valid is False:
printusage(usagemsg, precompile)
return
# try to callback cns precompile
precompile.call_cns()
# try to callback consensus precompile
precompile.call_consensus()
# try to callback config precompile
precompile.call_sysconfig_precompile()
# try to callback permission precompile
precompile.call_permission_precompile()
# try to callback crud precompile
precompile.call_crud_precompile()
# try to callback rpc functions
rpcConsole = RPCConsole(cmd, inputparams, contracts_dir)
rpcConsole.executeRpcCommand()
def show_gm_account(name, password):
account = GM_Account()
keyfile = "{}/{}.json".format(client_config.account_keyfile_path,
name)
account.load_from_file(keyfile, password)
print("load account from file: ", keyfile)
print(account.getdetail())
def show_ecdsa_account(name, password):
keyfile = "{}/{}.keystore".format(
client_config.account_keyfile_path, name)
# the account doesn't exists
if os.path.exists(keyfile) is False:
raise BcosException("account {} doesn't exists".format(name))
print("show account : {}, keyfile:{} ,password {} ".format(
name, keyfile, password))
try:
with open(keyfile, "r") as dump_f:
keytext = json.load(dump_f)
stat = StatTool.begin()
privkey = Account.decrypt(keytext, password)
stat.done()
print("decrypt use time : %.3f s" % (stat.time_used))
ac2 = Account.from_key(privkey)
print("address:\t", ac2.address)
print("privkey:\t", encode_hex(ac2.key))
print("pubkey :\t", ac2.publickey)
print("\naccount store in file: [{}]".format(keyfile))
print("\n**** please remember your password !!! *****")
except Exception as e:
raise BcosException(("load account info for [{}] failed,"
" error info: {}!").format(name, e))
if cmd == "showaccount":
# must be 2 params
common.check_param_num(inputparams, 2, True)
name = inputparams[0]
password = inputparams[1]
if client_config.crypto_type == CRYPTO_TYPE_GM:
show_gm_account(name, password)
else:
show_ecdsa_account(name, password)
def create_gm_account(name, password, forcewrite):
keyfile = "{}/{}.json".format(client_config.account_keyfile_path,
name)
if not os.path.exists(keyfile): # 如果默认文件不存在，直接写
forcewrite = True
else:
forcewrite = common.backup_file(keyfile) # 如果备份失败，不要覆盖写
account = GM_Account()
account.create()
if forcewrite:
account.save_to_file(keyfile, password)
print("account created:")
print(account.getdetail())
if forcewrite:
print("account save to :", keyfile)
def create_ecdsa_account(name, password, forcewrite):
ac = Account.create(password)
print("new address :\t", ac.address)
print("new privkey :\t", encode_hex(ac.key))
print("new pubkey :\t", ac.publickey)
stat = StatTool.begin()
kf = Account.encrypt(ac.privateKey, password)
stat.done()
print("encrypt use time : %.3f s" % (stat.time_used))
keyfile = "{}/{}.keystore".format(
client_config.account_keyfile_path, name)
print("save to file : [{}]".format(keyfile))
forcewrite = False
if not os.access(keyfile, os.F_OK): # 默认的账号文件不存在，就强行存一个
forcewrite = True
else:
# old file exist,move to backup file first
if len(inputparams) == 3 and inputparams[2] == "save":
forcewrite = True
else:
forcewrite = common.backup_file(
keyfile) # 如果备份文件不成功，就不要覆盖写了
if forcewrite:
with open(keyfile, "w") as dump_f:
json.dump(kf, dump_f)
dump_f.close()
print(">>-------------------------------------------------------")
print(
"INFO >> read [{}] again after new account,address & keys in file:"
.format(keyfile))
with open(keyfile, "r") as dump_f:
keytext = json.load(dump_f)
stat = StatTool.begin()
privkey = Account.decrypt(keytext, password)
stat.done()
print("decrypt use time : %.3f s" % (stat.time_used))
ac2 = Account.from_key(privkey)
print("address:\t", ac2.address)
print("privkey:\t", encode_hex(ac2.key))
print("pubkey :\t", ac2.publickey)
print("\naccount store in file: [{}]".format(keyfile))
print("\n**** please remember your password !!! *****")
dump_f.close()
if cmd == "newaccount":
common.check_param_num(inputparams, 2, False)
name = inputparams[0]
max_account_len = 240
if len(name) > max_account_len:
common.print_info(
"WARNING",
"account name should no more than {}".format(
max_account_len),
)
sys.exit(1)
password = inputparams[1]
forcewrite = False
if len(inputparams) == 3 and inputparams[2] == "save":
forcewrite = True
print("starting : {} {} , if save:{}".format(
name, password, forcewrite))
if client_config.crypto_type == CRYPTO_TYPE_GM:
create_gm_account(name, password, forcewrite)
else:
create_ecdsa_account(name, password, forcewrite)
if cmd == "deploylast":
contracts = ContractNote.get_last_contracts()
for name in contracts:
print("{} -> {}".format(name, contracts[name]))
if cmd == "deploylog":
historys = ContractNote.get_history_list()
for address in historys:
print("{} -> {} ".format(address, historys[address]))
# --------------------------------------------------------------------------------------------
# console cmd entity
# --------------------------------------------------------------------------------------------
if cmd == "deploy":
"""deploy abi bin file"""
# must be at least 2 params
common.check_param_num(inputparams, 1)
contractname = inputparams[0].strip()
gasPrice = 30000000
# need save address whether or not
needSaveAddress = False
args_len = len(inputparams)
if inputparams[-1] == "save":
needSaveAddress = True
args_len = len(inputparams) - 1
# get the args
fn_args = inputparams[1:args_len]
tx_client = transaction_common.TransactionCommon(
"", contracts_dir, contractname)
result = tx_client.send_transaction_getReceipt(
None, fn_args, gasPrice, True)[0]
print("INFO >> client info: {}".format(tx_client.getinfo()))
print("deploy result for [{}] is:\n {}".format(
contractname, json.dumps(result, indent=4)))
name = contractname
address = result["contractAddress"]
blocknum = int(result["blockNumber"], 16)
txhash = result["transactionHash"]
ContractNote.save_contract_address(name, address)
print("on block : {},address: {} ".format(blocknum, address))
if needSaveAddress is True:
ContractNote.save_address_to_contract_note(name, address)
print("address save to file: ",
client_config.contract_info_file)
else:
print("""\nNOTE : if want to save new address as last
address for (call/sendtx)\nadd 'save' to cmdline and run again"""
)
ContractNote.save_history(name, address, blocknum, txhash)
# --------------------------------------------------------------------------------------------
# console cmd entity
# --------------------------------------------------------------------------------------------
if cmd == "call" or cmd == "sendtx":
common.check_param_num(inputparams, 3)
paramsname = ["contractname", "address", "func"]
params = fill_params(inputparams, paramsname)
contractname = params["contractname"]
address = params["address"]
if address == "last":
address = ContractNote.get_last(contractname)
if address is None:
sys.exit("can not get last address for [{}],break;".format(
contractname))
tx_client = transaction_common.TransactionCommon(
address, contracts_dir, contractname)
fn_name = params["func"]
fn_args = inputparams[3:]
print("INFO>> client info: {}".format(tx_client.getinfo()))
print("INFO >> {} {} , address: {}, func: {}, args:{}".format(
cmd, contractname, address, fn_name, fn_args))
if cmd == "call":
result = tx_client.call_and_decode(fn_name, fn_args)
print("INFO >> {} result:".format(cmd))
common.print_tx_result(result)
if cmd == "sendtx":
receipt = tx_client.send_transaction_getReceipt(
fn_name, fn_args)[0]
data_parser = DatatypeParser(default_abi_file(contractname))
print("\n\nINFO >> from address: {} ".format(
tx_client.keypair.address))
# 解析receipt里的log 和 相关的tx ,output
print_receipt_logs_and_txoutput(tx_client, receipt, "",
data_parser)
# --------------------------------------------------------------------------------------------
# console cmd entity
# --------------------------------------------------------------------------------------------
if cmd == "list":
RPCConsole.print_rpc_usage()
print(
"--------------------------------------------------------------------"
)
# --------------------------------------------------------------------------------------------
# console cmd entity
# --------------------------------------------------------------------------------------------
if cmd == "txinput":
contractname = inputparams[0]
inputdata = inputparams[1]
abi_path = default_abi_file(contractname)
if os.path.isfile(abi_path) is False:
raise BcosException(
"execute {} failed for {} doesn't exist".format(
cmd, abi_path))
try:
dataParser = DatatypeParser(abi_path)
# print(dataParser.func_abi_map_by_selector)
result = dataParser.parse_transaction_input(inputdata)
print("\nabifile : ", default_abi_file(contractname))
print("parse result: {}".format(result))
except Exception as e:
raise BcosException("execute {} failed for reason: {}".format(
cmd, e))
# --------------------------------------------------------------------------------------------
# console cmd entity
# --------------------------------------------------------------------------------------------
if cmd == "checkaddr":
address = inputparams[0]
result = to_checksum_address(address)
print("{} -->\n{}".format(address, result))
# --------------------------------------------------------------------------------------------
# console cmd entity
# --------------------------------------------------------------------------------------------
if cmd == "usage":
printusage(usagemsg, precompile)
except TransactionException as e:
common.print_error_msg(cmd, e)
except PrecompileError as e:
common.print_error_msg(cmd, e)
except BcosError as e:
common.print_error_msg(cmd, e)
except CompileError as e:
common.print_error_msg(cmd, e)
except ArgumentsError as e:
common.print_error_msg(cmd, e)
except BcosException as e:
common.print_error_msg(cmd, e)
except ValueError as e:
common.print_error_msg(cmd, e)
except InsufficientDataBytes as e:
common.print_error_msg(cmd, e)
except Exception as e:
print("exception happened!")
import traceback
print(traceback.format_exc())
exit(-1)
client = BcosClient()
print(client.getinfo())
# 部署合约
print(
"\n>>Deploy:----------------------------------------------------------"
)
with open("contracts/SimpleInfo.bin", 'r') as load_f:
contract_bin = load_f.read()
load_f.close()
result = client.deploy(contract_bin)
print("deploy", result)
print("new address : ", result["contractAddress"])
contract_name = os.path.splitext(os.path.basename(abi_file))[0]
memo = "tx:" + result["transactionHash"]
# 把部署结果存入文件备查
ContractNote.save_address_to_contract_note(contract_name,
result["contractAddress"])
# 发送交易，调用一个改写数据的接口
print(
"\n>>sendRawTransaction:----------------------------------------------------"
)
to_address = result['contractAddress'] # use new deploy address
args = [
'simplename', 2024,
to_checksum_address('0x7029c502b4F824d19Bd7921E9cb74Ef92392FB1c')
]
receipt = client.sendRawTransactionGetReceipt(to_address, contract_abi,
"set", args)
print("receipt:", receipt)
# 解析receipt里的log