def fcr_state_persist_disabled():
"""
Check if FCR is disabled, if not bail out and ask user to enable it.
When FCR is disabled, do a reboot then check FCR is still disabled.
"""
host = (sys.argv[1])
user = sys.argv[2]
password = sys.argv[7]
#test_file = '/home/RunFromHere/ini/SwitchMatrix.csv'
#csv_file = csv.DictReader(open(test_file, 'r'), delimiter=',', quotechar='"')
fcr_state = fcr_tools.switch_status()
state = fcr_state['fcr_enabled']
if state is False: #the same to here disabled is false, enabled is true
anturlar.fos_cmd("switchdisable")
print('\n\nSleeping: 10')
liabhar.JustSleep(10)
enabled = fcr_tools.switch_status()
if enabled['fcr_enabled'] is False:
anturlar.fos_cmd("switchenable")
print('\n\nSleeping: 10')
liabhar.JustSleep(10)
print("\n\nENABLE/DISABLE TEST PASSED")
else:
pass
else:
print("\n\nENABLE/DISABLE TEST FAILED")
print("Please disable fcr for this test and try again")
sys.exit(0)
print('Sleeping: 10')
liabhar.JustSleep(10)
si = anturlar.SwitchInfo()
cn = si.chassisname()
a = cofra.switch_power_off_on(cn, 'off')
print('Sleeping: 20')
liabhar.JustSleep(20)
a = cofra.switch_power_off_on(cn, 'on')
print('Sleeping: 120')
liabhar.JustSleep(120)
anturlar.connect_tel_noparse(host, user, password)
fcr_state = fcr_tools.switch_status()
state = fcr_state['fcr_enabled']
if state is False:
print('Reboot Complete. FCR State remains consistent')
print('TEST PASSED')
else:
print('FCR State changed.')
print('TEST FAILED')
sys.exit(0)#######################
def fcr_state_persist_disabled():
"""
Check if FCR is disabled, if not bail out and ask user to enable it.
When FCR is disabled, do a reboot then check FCR is still disabled.
"""
host = (sys.argv[1])
user = sys.argv[2]
password = sys.argv[7]
#test_file = '/home/RunFromHere/ini/SwitchMatrix.csv'
#csv_file = csv.DictReader(open(test_file, 'r'), delimiter=',', quotechar='"')
fcr_state = fcr_tools.switch_status()
state = fcr_state['fcr_enabled']
if state is False: #the same to here disabled is false, enabled is true
anturlar.fos_cmd("switchdisable")
print('\n\nSleeping: 10')
liabhar.JustSleep(10)
enabled = fcr_tools.switch_status()
if enabled['fcr_enabled'] is False:
anturlar.fos_cmd("switchenable")
print('\n\nSleeping: 10')
liabhar.JustSleep(10)
print("\n\nENABLE/DISABLE TEST PASSED")
else:
pass
else:
print("\n\nENABLE/DISABLE TEST FAILED")
print("Please disable fcr for this test and try again")
sys.exit(0)
print('Sleeping: 10')
liabhar.JustSleep(10)
si = anturlar.SwitchInfo()
cn = si.chassisname()
a = cofra.switch_power_off_on(cn, 'off')
print('Sleeping: 20')
liabhar.JustSleep(20)
a = cofra.switch_power_off_on(cn, 'on')
print('Sleeping: 120')
liabhar.JustSleep(120)
anturlar.connect_tel_noparse(host, user, password)
fcr_state = fcr_tools.switch_status()
state = fcr_state['fcr_enabled']
if state is False:
print('Reboot Complete. FCR State remains consistent')
print('TEST PASSED')
else:
print('FCR State changed.')
print('TEST FAILED')
sys.exit(0) #######################
def fcr_state_persist_enabled():
#print(sys.argv)
host = (sys.argv[1])
user = sys.argv[2]
password = sys.argv[7]
test_file = '/home/RunFromHere/ini/SwitchMatrix.csv'
csv_file = csv.DictReader(open(test_file, 'r'),
delimiter=',',
quotechar='"')
fcr_state = switch_status()
state = fcr_state['fcr_enabled']
if state is True:
anturlar.fos_cmd("switchdisable")
print('\n\nSleeping: 10')
liabhar.JustSleep(10)
enabled = switch_status()
if enabled['fcr_enabled'] is True:
anturlar.fos_cmd("switchenable")
print('\n\nSleeping: 10')
liabhar.JustSleep(10)
print("\n\nENABLE/DISABLE TEST PASSED")
else:
pass
else:
print("\n\nENABLE/DISABLE TEST FAILED")
print("Please enable fcr for this test and try again")
sys.exit(0)
print('\n\nSleeping: 10')
liabhar.JustSleep(10)
si = anturlar.SwitchInfo()
cn = si.chassisname()
a = cofra.switch_power_off_on(cn, 'off')
print('\n\nSleeping: 20')
liabhar.JustSleep(20)
a = cofra.switch_power_off_on(cn, 'on')
print('\n\nSleeping: 120')
liabhar.JustSleep(120)
anturlar.connect_tel_noparse(host, user, password)
si = anturlar.SwitchInfo()
print("GETTINGFCRSTATE")
fcr_state = switch_status()
state = fcr_state['fcr_enabled']
if state is True:
print('Reboot Complete. FCR State remains consistent')
print('TEST PASSED')
else:
print('FCR State changed.')
print('TEST FAILED')
def fcr_state_persist_enabled():
#print(sys.argv)
host = (sys.argv[1])
user = sys.argv[2]
password = sys.argv[7]
test_file = '/home/RunFromHere/ini/SwitchMatrix.csv'
csv_file = csv.DictReader(open(test_file, 'r'), delimiter=',', quotechar='"')
fcr_state = switch_status()
state = fcr_state['fcr_enabled']
if state is True:
anturlar.fos_cmd("switchdisable")
print('\n\nSleeping: 10')
liabhar.JustSleep(10)
enabled = switch_status()
if enabled['fcr_enabled'] is True:
anturlar.fos_cmd("switchenable")
print('\n\nSleeping: 10')
liabhar.JustSleep(10)
print("\n\nENABLE/DISABLE TEST PASSED")
else:
pass
else:
print("\n\nENABLE/DISABLE TEST FAILED")
print("Please enable fcr for this test and try again")
sys.exit(0)
print('\n\nSleeping: 10')
liabhar.JustSleep(10)
si = anturlar.SwitchInfo()
cn = si.chassisname()
a = cofra.switch_power_off_on(cn, 'off')
print('\n\nSleeping: 20')
liabhar.JustSleep(20)
a = cofra.switch_power_off_on(cn, 'on')
print('\n\nSleeping: 120')
liabhar.JustSleep(120)
anturlar.connect_tel_noparse(host, user, password)
si = anturlar.SwitchInfo()
print("GETTINGFCRSTATE")
fcr_state = switch_status()
state = fcr_state['fcr_enabled']
if state is True:
print('Reboot Complete. FCR State remains consistent')
print('TEST PASSED')
else:
print('FCR State changed.')
print('TEST FAILED')