def should_shutdown(self, health, offroad_timestamp, started_seen, LEON):
if health is None or offroad_timestamp is None:
return False
now = sec_since_boot()
panda_charging = (health.health.usbPowerMode !=
log.HealthData.UsbPowerMode.client)
BATT_PERC_OFF = 10 if LEON else 3
should_shutdown = False
# Wait until we have shut down charging before powering down
should_shutdown |= (not panda_charging
and self.should_disable_charging(
health, offroad_timestamp))
should_shutdown |= ((HARDWARE.get_battery_capacity() < BATT_PERC_OFF)
and (not HARDWARE.get_battery_charging())
and ((now - offroad_timestamp) > 60))
should_shutdown &= started_seen
return should_shutdown
def thermald_thread():
health_timeout = int(1000 * 2.5 * DT_TRML) # 2.5x the expected health frequency
# now loop
thermal_sock = messaging.pub_sock('thermal')
health_sock = messaging.sub_sock('health', timeout=health_timeout)
location_sock = messaging.sub_sock('gpsLocation')
fan_speed = 0
count = 0
startup_conditions = {
"ignition": False,
}
startup_conditions_prev = startup_conditions.copy()
off_ts = None
started_ts = None
started_seen = False
thermal_status = ThermalStatus.green
usb_power = True
current_branch = get_git_branch()
network_type = NetworkType.none
network_strength = NetworkStrength.unknown
current_filter = FirstOrderFilter(0., CURRENT_TAU, DT_TRML)
cpu_temp_filter = FirstOrderFilter(0., CPU_TEMP_TAU, DT_TRML)
health_prev = None
should_start_prev = False
handle_fan = None
is_uno = False
params = Params()
pm = PowerMonitoring()
no_panda_cnt = 0
thermal_config = get_thermal_config()
while 1:
health = messaging.recv_sock(health_sock, wait=True)
location = messaging.recv_sock(location_sock)
location = location.gpsLocation if location else None
msg = read_thermal(thermal_config)
if health is not None:
usb_power = health.health.usbPowerMode != log.HealthData.UsbPowerMode.client
# If we lose connection to the panda, wait 5 seconds before going offroad
if health.health.hwType == log.HealthData.HwType.unknown:
no_panda_cnt += 1
if no_panda_cnt > DISCONNECT_TIMEOUT / DT_TRML:
if startup_conditions["ignition"]:
cloudlog.error("Lost panda connection while onroad")
startup_conditions["ignition"] = False
else:
no_panda_cnt = 0
startup_conditions["ignition"] = health.health.ignitionLine or health.health.ignitionCan
# Setup fan handler on first connect to panda
if handle_fan is None and health.health.hwType != log.HealthData.HwType.unknown:
is_uno = health.health.hwType == log.HealthData.HwType.uno
if (not EON) or is_uno:
cloudlog.info("Setting up UNO fan handler")
handle_fan = handle_fan_uno
else:
cloudlog.info("Setting up EON fan handler")
setup_eon_fan()
handle_fan = handle_fan_eon
# Handle disconnect
if health_prev is not None:
if health.health.hwType == log.HealthData.HwType.unknown and \
health_prev.health.hwType != log.HealthData.HwType.unknown:
params.panda_disconnect()
health_prev = health
# get_network_type is an expensive call. update every 10s
if (count % int(10. / DT_TRML)) == 0:
try:
network_type = HARDWARE.get_network_type()
network_strength = HARDWARE.get_network_strength(network_type)
except Exception:
cloudlog.exception("Error getting network status")
msg.thermal.freeSpace = get_available_percent(default=100.0) / 100.0
msg.thermal.memUsedPercent = int(round(psutil.virtual_memory().percent))
msg.thermal.cpuPerc = int(round(psutil.cpu_percent()))
msg.thermal.networkType = network_type
msg.thermal.networkStrength = network_strength
msg.thermal.batteryPercent = HARDWARE.get_battery_capacity()
msg.thermal.batteryStatus = HARDWARE.get_battery_status()
msg.thermal.batteryCurrent = HARDWARE.get_battery_current()
msg.thermal.batteryVoltage = HARDWARE.get_battery_voltage()
msg.thermal.usbOnline = HARDWARE.get_usb_present()
# Fake battery levels on uno for frame
if (not EON) or is_uno:
msg.thermal.batteryPercent = 100
msg.thermal.batteryStatus = "Charging"
msg.thermal.bat = 0
current_filter.update(msg.thermal.batteryCurrent / 1e6)
# TODO: add car battery voltage check
max_cpu_temp = cpu_temp_filter.update(max(msg.thermal.cpu))
max_comp_temp = max(max_cpu_temp, msg.thermal.mem, max(msg.thermal.gpu))
bat_temp = msg.thermal.bat
if handle_fan is not None:
fan_speed = handle_fan(max_cpu_temp, bat_temp, fan_speed, startup_conditions["ignition"])
msg.thermal.fanSpeed = fan_speed
# If device is offroad we want to cool down before going onroad
# since going onroad increases load and can make temps go over 107
# We only do this if there is a relay that prevents the car from faulting
is_offroad_for_5_min = (started_ts is None) and ((not started_seen) or (off_ts is None) or (sec_since_boot() - off_ts > 60 * 5))
if max_cpu_temp > 107. or bat_temp >= 63. or (is_offroad_for_5_min and max_cpu_temp > 70.0):
# onroad not allowed
thermal_status = ThermalStatus.danger
elif max_comp_temp > 96.0 or bat_temp > 60.:
# hysteresis between onroad not allowed and engage not allowed
thermal_status = clip(thermal_status, ThermalStatus.red, ThermalStatus.danger)
elif max_cpu_temp > 94.0:
# hysteresis between engage not allowed and uploader not allowed
thermal_status = clip(thermal_status, ThermalStatus.yellow, ThermalStatus.red)
elif max_cpu_temp > 80.0:
# uploader not allowed
thermal_status = ThermalStatus.yellow
elif max_cpu_temp > 75.0:
# hysteresis between uploader not allowed and all good
thermal_status = clip(thermal_status, ThermalStatus.green, ThermalStatus.yellow)
else:
# all good
thermal_status = ThermalStatus.green
# **** starting logic ****
# Check for last update time and display alerts if needed
now = datetime.datetime.utcnow()
# show invalid date/time alert
startup_conditions["time_valid"] = (now.year > 2020) or (now.year == 2020 and now.month >= 10)
set_offroad_alert_if_changed("Offroad_InvalidTime", (not startup_conditions["time_valid"]))
# Show update prompt
try:
last_update = datetime.datetime.fromisoformat(params.get("LastUpdateTime", encoding='utf8'))
except (TypeError, ValueError):
last_update = now
dt = now - last_update
update_failed_count = params.get("UpdateFailedCount")
update_failed_count = 0 if update_failed_count is None else int(update_failed_count)
last_update_exception = params.get("LastUpdateException", encoding='utf8')
if update_failed_count > 15 and last_update_exception is not None:
if current_branch in ["release2", "dashcam"]:
extra_text = "Ensure the software is correctly installed"
else:
extra_text = last_update_exception
set_offroad_alert_if_changed("Offroad_ConnectivityNeeded", False)
set_offroad_alert_if_changed("Offroad_ConnectivityNeededPrompt", False)
set_offroad_alert_if_changed("Offroad_UpdateFailed", True, extra_text=extra_text)
elif dt.days > DAYS_NO_CONNECTIVITY_MAX and update_failed_count > 1:
set_offroad_alert_if_changed("Offroad_UpdateFailed", False)
set_offroad_alert_if_changed("Offroad_ConnectivityNeededPrompt", False)
set_offroad_alert_if_changed("Offroad_ConnectivityNeeded", True)
elif dt.days > DAYS_NO_CONNECTIVITY_PROMPT:
remaining_time = str(max(DAYS_NO_CONNECTIVITY_MAX - dt.days, 0))
set_offroad_alert_if_changed("Offroad_UpdateFailed", False)
set_offroad_alert_if_changed("Offroad_ConnectivityNeeded", False)
set_offroad_alert_if_changed("Offroad_ConnectivityNeededPrompt", True, extra_text=f"{remaining_time} days.")
else:
set_offroad_alert_if_changed("Offroad_UpdateFailed", False)
set_offroad_alert_if_changed("Offroad_ConnectivityNeeded", False)
set_offroad_alert_if_changed("Offroad_ConnectivityNeededPrompt", False)
startup_conditions["not_uninstalling"] = not params.get("DoUninstall") == b"1"
startup_conditions["accepted_terms"] = params.get("HasAcceptedTerms") == terms_version
panda_signature = params.get("PandaFirmware")
startup_conditions["fw_version_match"] = (panda_signature is None) or (panda_signature == FW_SIGNATURE) # don't show alert is no panda is connected (None)
set_offroad_alert_if_changed("Offroad_PandaFirmwareMismatch", (not startup_conditions["fw_version_match"]))
# with 2% left, we killall, otherwise the phone will take a long time to boot
startup_conditions["free_space"] = msg.thermal.freeSpace > 0.02
startup_conditions["completed_training"] = params.get("CompletedTrainingVersion") == training_version or \
(current_branch in ['dashcam', 'dashcam-staging'])
startup_conditions["not_driver_view"] = not params.get("IsDriverViewEnabled") == b"1"
startup_conditions["not_taking_snapshot"] = not params.get("IsTakingSnapshot") == b"1"
# if any CPU gets above 107 or the battery gets above 63, kill all processes
# controls will warn with CPU above 95 or battery above 60
startup_conditions["device_temp_good"] = thermal_status < ThermalStatus.danger
set_offroad_alert_if_changed("Offroad_TemperatureTooHigh", (not startup_conditions["device_temp_good"]))
should_start = all(startup_conditions.values())
startup_conditions["hardware_supported"] = health is not None and health.health.hwType not in [log.HealthData.HwType.whitePanda,
log.HealthData.HwType.greyPanda]
set_offroad_alert_if_changed("Offroad_HardwareUnsupported", health is not None and not startup_conditions["hardware_supported"])
if should_start:
if not should_start_prev:
params.delete("IsOffroad")
off_ts = None
if started_ts is None:
started_ts = sec_since_boot()
started_seen = True
else:
if startup_conditions["ignition"] and (startup_conditions != startup_conditions_prev):
cloudlog.event("Startup blocked", startup_conditions=startup_conditions)
if should_start_prev or (count == 0):
params.put("IsOffroad", "1")
started_ts = None
if off_ts is None:
off_ts = sec_since_boot()
# Offroad power monitoring
pm.calculate(health)
msg.thermal.offroadPowerUsage = pm.get_power_used()
msg.thermal.carBatteryCapacity = max(0, pm.get_car_battery_capacity())
# Check if we need to disable charging (handled by boardd)
msg.thermal.chargingDisabled = pm.should_disable_charging(health, off_ts)
# Check if we need to shut down
if pm.should_shutdown(health, off_ts, started_seen, LEON):
cloudlog.info(f"shutting device down, offroad since {off_ts}")
# TODO: add function for blocking cloudlog instead of sleep
time.sleep(10)
os.system('LD_LIBRARY_PATH="" svc power shutdown')
msg.thermal.chargingError = current_filter.x > 0. and msg.thermal.batteryPercent < 90 # if current is positive, then battery is being discharged
msg.thermal.started = started_ts is not None
msg.thermal.startedTs = int(1e9*(started_ts or 0))
msg.thermal.thermalStatus = thermal_status
thermal_sock.send(msg.to_bytes())
set_offroad_alert_if_changed("Offroad_ChargeDisabled", (not usb_power))
should_start_prev = should_start
startup_conditions_prev = startup_conditions.copy()
# report to server once per minute
if (count % int(60. / DT_TRML)) == 0:
cloudlog.event("STATUS_PACKET",
count=count,
health=(health.to_dict() if health else None),
location=(location.to_dict() if location else None),
thermal=msg.to_dict())
count += 1
