def create_poorly_configured_split_instance(self):
"""
Creates a split test instance with a missing group and an inactive group.
Returns the container page.
"""
unit = self.go_to_unit_page()
add_advanced_component(unit, 0, 'split_test')
container = self.go_to_nested_container_page()
container.edit()
component_editor = XBlockEditorView(self.browser, container.locator)
component_editor.set_select_value_and_save('Group Configuration',
'Configuration alpha,beta')
self.course_fixture._update_xblock(
self.course_fixture._course_location, {
"metadata": {
u"user_partitions": [
create_user_partition_json(
0, 'Configuration alpha,beta', 'first',
[Group("0", 'alpha'),
Group("2", 'gamma')])
],
},
})
return self.go_to_nested_container_page()
def test_use_group_configuration(self):
"""
Scenario: Ensure that the group configuration can be used by split_module correctly
Given I have a course without group configurations
When I create new group configuration
And I set new name and add a new group, save the group configuration
And I go to the unit page in Studio
And I add new advanced module "Content Experiment"
When I assign created group configuration to the module
Then I see the module has correct groups
"""
self.page.visit()
# Create new group configuration
self.page.create_experiment_group_configuration()
config = self.page.experiment_group_configurations[0]
config.name = "New Group Configuration Name"
# Add new group
config.add_group()
config.groups[2].name = "New group"
# Save the configuration
config.save()
split_test = self._add_split_test_to_vertical(number=0)
container = ContainerPage(self.browser, split_test.locator)
container.visit()
container.edit()
component_editor = XBlockEditorView(self.browser, container.locator)
component_editor.set_select_value_and_save(
'Group Configuration', 'New Group Configuration Name')
self.verify_groups(container, ['Group A', 'Group B', 'New group'], [])
def test_use_group_configuration(self):
"""
Scenario: Ensure that the group configuration can be used by split_module correctly
Given I have a course without group configurations
When I create new group configuration
And I set new name and add a new group, save the group configuration
And I go to the unit page in Studio
And I add new advanced module "Content Experiment"
When I assign created group configuration to the module
Then I see the module has correct groups
"""
self.page.visit()
# Create new group configuration
self.page.create_experiment_group_configuration()
config = self.page.experiment_group_configurations[0]
config.name = "New Group Configuration Name"
# Add new group
config.add_group()
config.groups[2].name = "New group"
# Save the configuration
config.save()
split_test = self._add_split_test_to_vertical(number=0)
container = ContainerPage(self.browser, split_test.locator)
container.visit()
container.edit()
component_editor = XBlockEditorView(self.browser, container.locator)
component_editor.set_select_value_and_save('Group Configuration', 'New Group Configuration Name')
self.verify_groups(container, ['Group A', 'Group B', 'New group'], [])
def create_poorly_configured_split_instance(self):
"""
Creates a split test instance with a missing group and an inactive group.
Returns the container page.
"""
unit = self.go_to_unit_page()
add_advanced_component(unit, 0, 'split_test')
container = self.go_to_nested_container_page()
container.edit()
component_editor = XBlockEditorView(self.browser, container.locator)
component_editor.set_select_value_and_save('Group Configuration', 'Configuration alpha,beta')
self.course_fixture._update_xblock(self.course_fixture._course_location, {
"metadata": {
u"user_partitions": [
create_user_partition_json(
0,
'Configuration alpha,beta',
'first',
[Group("0", 'alpha'), Group("2", 'gamma')]
)
],
},
})
return self.go_to_nested_container_page()
def test_create_and_select_group_configuration(self):
"""
Tests creating a split test instance on the unit page, and then
assigning the group configuration.
"""
unit = self.go_to_unit_page()
add_advanced_component(unit, 0, 'split_test')
container = self.go_to_nested_container_page()
container.edit()
component_editor = XBlockEditorView(self.browser, container.locator)
component_editor.set_select_value_and_save('Group Configuration',
'Configuration alpha,beta')
self.verify_groups(container, ['alpha', 'beta'], [])
# Switch to the other group configuration. Must navigate again to the container page so
# that there is only a single "editor" on the page.
container = self.go_to_nested_container_page()
container.edit()
component_editor = XBlockEditorView(self.browser, container.locator)
component_editor.set_select_value_and_save('Group Configuration',
'Configuration 0,1,2')
self.verify_groups(container, ['Group 0', 'Group 1', 'Group 2'],
['Group ID 0', 'Group ID 1'])
# Reload the page to make sure the groups were persisted.
container = self.go_to_nested_container_page()
self.verify_groups(container, ['Group 0', 'Group 1', 'Group 2'],
['Group ID 0', 'Group ID 1'])
def test_create_and_select_group_configuration(self):
"""
Tests creating a split test instance on the unit page, and then
assigning the group configuration.
"""
unit = self.go_to_unit_page()
add_advanced_component(unit, 0, 'split_test')
container = self.go_to_nested_container_page()
container.edit()
component_editor = XBlockEditorView(self.browser, container.locator)
component_editor.set_select_value_and_save('Group Configuration', 'Configuration alpha,beta')
self.verify_groups(container, ['alpha', 'beta'], [])
# Switch to the other group configuration. Must navigate again to the container page so
# that there is only a single "editor" on the page.
container = self.go_to_nested_container_page()
container.edit()
component_editor = XBlockEditorView(self.browser, container.locator)
component_editor.set_select_value_and_save('Group Configuration', 'Configuration 0,1,2')
self.verify_groups(container, ['Group 0', 'Group 1', 'Group 2'], ['Group ID 0', 'Group ID 1'])
# Reload the page to make sure the groups were persisted.
container = self.go_to_nested_container_page()
self.verify_groups(container, ['Group 0', 'Group 1', 'Group 2'], ['Group ID 0', 'Group ID 1'])
def test_container_page_active_verticals_names_are_synced(self):
"""
Scenario: Ensure that the Content Experiment display synced vertical names and correct groups.
Given I have a course with group configuration
And I go to the Group Configuration page in Studio
And I edit the name of the group configuration, add new group and remove old one
And I change the name for the group "New group" to "Second Group"
And I go to the Container page in Studio
And I edit the Content Experiment
Then I see the group configuration name is changed in `Group Configuration` dropdown
And the group configuration name is changed on container page
And I see the module has 2 active groups and one inactive
And I see "Add missing groups" link exists
When I click on "Add missing groups" link
The I see the module has 3 active groups and one inactive
"""
self.course_fixture._update_xblock(
self.course_fixture._course_location, {
"metadata": {
u"user_partitions": [
create_user_partition_json(
0, 'Name of the Group Configuration',
'Description of the group configuration.', [
Group("0", 'Group A'),
Group("1", 'Group B'),
Group("2", 'Group C')
]),
],
},
})
# Add split test to vertical and assign newly created group configuration to it
split_test = self._add_split_test_to_vertical(
number=0, group_configuration_metadata={'user_partition_id': 0})
self.page.visit()
config = self.page.experiment_group_configurations[0]
config.edit()
config.name = "Second Group Configuration Name"
# `Group C` -> `Second Group`
config.groups[2].name = "Second Group"
# Add new group
config.add_group() # Group D
# Remove Group A
config.groups[0].remove()
# Save the configuration
config.save()
container = ContainerPage(self.browser, split_test.locator)
container.visit()
container.edit()
component_editor = XBlockEditorView(self.browser, container.locator)
self.assertEqual(
"Second Group Configuration Name",
component_editor.get_selected_option_text('Group Configuration'))
component_editor.cancel()
self.assertIn("Second Group Configuration Name",
container.get_xblock_information_message())
self.verify_groups(container, ['Group B', 'Second Group'],
['Group ID 0'],
verify_missing_groups_not_present=False)
# Click the add button and verify that the groups were added on the page
container.add_missing_groups()
self.verify_groups(container, ['Group B', 'Second Group', 'Group D'],
['Group ID 0'])
def test_container_page_active_verticals_names_are_synced(self):
"""
Scenario: Ensure that the Content Experiment display synced vertical names and correct groups.
Given I have a course with group configuration
And I go to the Group Configuration page in Studio
And I edit the name of the group configuration, add new group and remove old one
And I change the name for the group "New group" to "Second Group"
And I go to the Container page in Studio
And I edit the Content Experiment
Then I see the group configuration name is changed in `Group Configuration` dropdown
And the group configuration name is changed on container page
And I see the module has 2 active groups and one inactive
And I see "Add missing groups" link exists
When I click on "Add missing groups" link
The I see the module has 3 active groups and one inactive
"""
self.course_fixture._update_xblock(self.course_fixture._course_location, {
"metadata": {
u"user_partitions": [
create_user_partition_json(
0,
'Name of the Group Configuration',
'Description of the group configuration.',
[Group("0", 'Group A'), Group("1", 'Group B'), Group("2", 'Group C')]
),
],
},
})
# Add split test to vertical and assign newly created group configuration to it
split_test = self._add_split_test_to_vertical(number=0, group_configuration_metadata={'user_partition_id': 0})
self.page.visit()
config = self.page.experiment_group_configurations[0]
config.edit()
config.name = "Second Group Configuration Name"
# `Group C` -> `Second Group`
config.groups[2].name = "Second Group"
# Add new group
config.add_group() # Group D
# Remove Group A
config.groups[0].remove()
# Save the configuration
config.save()
container = ContainerPage(self.browser, split_test.locator)
container.visit()
container.edit()
component_editor = XBlockEditorView(self.browser, container.locator)
self.assertEqual(
"Second Group Configuration Name",
component_editor.get_selected_option_text('Group Configuration')
)
component_editor.cancel()
self.assertIn(
"Second Group Configuration Name",
container.get_xblock_information_message()
)
self.verify_groups(
container, ['Group B', 'Second Group'], ['Group ID 0'],
verify_missing_groups_not_present=False
)
# Click the add button and verify that the groups were added on the page
container.add_missing_groups()
self.verify_groups(container, ['Group B', 'Second Group', 'Group D'], ['Group ID 0'])